TME/414A /RC/TXM/01/13-14

Date: 03.06.2013

Technical Pre-Qualification Requirement for varnishes for HS15250A Traction Motor

The Pre-Qualification Criteria for varnishes of HS15250A Traction Motor are as under

Material should be as per following specifications:

Description SpecificationWI -294 TM88088 Rev 02S-30 TM90144 Rev 01WSY-101 TM88094 Rev 02P-200 TM89137 Rev 01HEW 821D TM88079 Rev 02HEW 502 NA TM88076 Rev 01HEW 502 NC TM88076 Rev 01WSY-195R TM88119 Rev 02WSY-285 TM88095 Rev 02HEW 823A TM88116 Rev 02HEW 823B TM88116 Rev 02

The suppliers should be registered with RDSO Electrical Directorate as Part-1 or Part-2 approved source and their names should appear in latest RDSO ElectricalDirectorate vendor directory for this items.

Web link of latest RDSO vendor directory (valid from 1/1/2013 till 30/6/2013):

http://www.rdso.indianrailways.gov.in/works/uploads/File/Electrical%201tem%20Vendor °/020Directory%20valid°/020form%2001.01.2013`)/020to%2030.06.2013.pdf

Prepared By:

Approved by:

(Shishu Pal)

(A K VarshnSr. Engineer/TME

AGM/TME

TME/414A /RC/TXM105/13-14 Date: 03.06.2013

THE/414A /RC/TXM/02/13-14 Date: 03.06.2013

Technical Pre-Qualification Requirement for Thinner S-110 & finishing varnish TVA-1410for HS15250A Traction Motor

The Pre-Qualification Criteria for S-110 & TVA 1410 of HS15250A Traction Motor are as under

Material should be as per following specifications:

Description SpecificationS-110 TM90145 Rev 01TVA 1410 TM88098 Rev 01

The suppliers should be registered with RDSO Electrical Directorate as Part-1 or Part-2 approved source and their names should appear in latest RDSO ElectricalDirectorate vendor directory for this items.

Web link of latest RDSO vendor directory (valid from 1/1/2013 till 30/6/2013):

http://www.rdso.indianrailways.gov.in/works/uploads/File/Electrical%20Item%20Vendor%20Directory%20valicP/020form°/02001.01.2013%20to°/02030.06.2013.pdf

Prepared

Approved by:„ I

(Shishu Pal) (A K VarshnSr. Engineer/TME AGM/TME

THE/414A /RC/TXM/03/13-14 Date: 03.06.2013

Technical Pre-Qualification Requirement for Epoxy varnish L-2832, DER-332 & MHAC-Pfor HS15250A Traction Motor

The Pre-Qualification Criteria for L-2832, DER-332 & MHAC-P of HS15250A Traction Motorare as under

Material should be as per following specifications:

Description SpecificationL-2832 TM89138 Rev 01DER-332 TM89139 Rev 01MHAC-P TM89140 Rev 02

The suppliers should be registered with RDSO Electrical Directorate as Part-1 or Part-2 approved source and their names should appear in latest RDSO ElectricalDirectorate vendor directory for this items.

Web link of latest RDSO vendor directory (valid from 1/1/2013 till 30/6/2013):

http://www.rdso.indianrailways.gov.in/works/uploads/File/Electricar/0201tem%20Vendor °/020Directory°/020valid°/020form%2001.01.2013°/020to°/02030.06.2013.pdf

Prepared By:

Approved by:

(Shishu Pal) (A Varshn ySr. Engineer/TME AGM/TME

THE/414A /RC/TXM/04/13-14 Date: 03.06.2013

Technical Pre-Qualification Requirement for mould releaser KS-707 for HS15250ATraction Motor

The Pre-Qualification Criteria for KS-707 of HS15250A Traction Motor are as under

Material should be as per following specifications:

Description SpecificationKS-707 TM88080 Rev 03

The suppliers should be registered with RDSO Electrical Directorate as Part-1 or Part-2 approved source and their names should appear in latest RDSO ElectricalDirectorate vendor directory for this items.

Web link of latest RDSO vendor directory (valid from 1/1/2013 till 30/6/2013):

http://www.rdso.indianrailways.gov.in/works/uploads/File/Electrical%201tem%20VendorY020Directory°/020valid%20form°/02001.01.2013%20to%2030.06.2013.pdf

Prepared By: App ved by:

.(Shishu Pal)

c —-arshney+

Sr. Engineer/TME AGM/TME