Products Solutions Services Application / Function Overview Technical data Dimensions Electrical connection Price table Contact Go to shop Technical Datasheet TD 00053E/24/EN/01.13 • Hygienic process connections, surface finishing R a ≤ 0.8 µm • PC programmable transmitter with 4 to 20 mA output or Pt100 sensor • Fast response times without reduced tip • M12×1 plug-in connector with IP 66 • Compact thermometer from stainless steel Complete product information: www.e-direct.us/tmr35 Specs at a glance: • Temperature range: -50 to +200 °C (-58 to 392 °F) • Accuracy: < 0.08 %, Pt100 class A • Immersion length (diameter): 40 to 600 mm (Ø 6 mm) (1.6 to 23.6” (Ø 0.24)) • Sensor response time: < 1.0 s (T 50 ), < 2.0 s (T 90 ) Hygienic compact thermometer with M12 connector, Pt100 or 4 to 20 mA Easytemp TMR35 $ 130.00
Transcript
Products Solutions Services
Application / FunctionOverview Technical data Dimensions
Electrical connection Price table ContactGo to shop
Technical DatasheetTD 00053E/24/EN/01.13
•Hygienic process connections, surface finishing Ra ≤ 0.8 µm
• PC programmable transmitter with 4 to 20 mA output or Pt100 sensor
• Fast response times without reduced tip
•M12×1 plug-in connector with IP 66• Compact thermometer from
Electrical connection Price table ContactGo to shop
Application / Function
Application Characterised by simplicity and compact construction, the Easytemp TMR35 is available with a range of hygienic process connections. It offers good accuracy and response times and has been specifically designed for hygienic applications with 3-A certification.
Function The compact thermometer consists of a Pt100 class A sensor, (optional) transducer and housing with hygienic process connection. The built-in electronics can be programmed using a PC and TXU10-BA configuration kit to convert the Pt100 input signal into a temperature linear 4 to 20 mA signal.
Installationinstructions
Pipe installation a) At angle sections, against the
direction of flowb) In smaller pipes, turned
against the direction of flowc) Perpendicular to the direction
Electrical connection Price table ContactGo to shop
DimensionsTechnical data
Technicaldata Dimensions(ininches)
SensorSensing element 1×Pt100Tolerance Class A according to IEC 751Process temperature -50 to +200 °CMaterial 316LSurface finishing Ra ≤ 0.8 µmSensor diameter 6 mm (0.24")Sensor length 40 to 600 mm selectable (please specify)Response time T50 = ≤ 1.0 s; T90 = ≤ 2.0 sMax. pressure 100 bar / 1500 psi (at 100 mm / 3.94" and
20 °C / 68 °F, depending on process connection)
Process connectionVersion Conical metal-to-metal connection, with G
½"; TRI-CLAMP® flange 1" 1-½", ISO 2852 DN 25/38; Dairy connection DIN 11851 DN 25; Varivent® Ø 68 mm for DN 32/125
Transmitter housingDegree of protection IP 66Electrical connection M12×1-plug-in connectorMaterial 304
Output characteristicsOutput signal 4 to 20 mA, 20 to 4 mA / Pt100Signal on alarm Sensor break; Sensor short-circuit: ≤ 3.6 mA
or ≥ 21.0 mALoad Max. (Upower supply -10 V)/0.023 AInd. current requirem. ≤ 3.5 mACurrent limitation ≤ 23 mASwitch-on delay 2 s
Power supplySupply voltage Ub = 10 to 35 V DCResidual ripple Permitted residual ripple Uss ≤ 3 V at Ub ≥ 13
V, fmax = 1 kHz
AccuracyTransmitter response time
1 s
Reference operating conditions
0 °C (32 °F) (ice bath)
Measuring error 0.1 K (0.18 °F) or 0.08 %Influence of supply voltage
≤ ±0.01 %/V deviation from 24 V
Influence of ambient temperature (temperature drift)
Td = ±(15 ppm / K × (full scale value of measuring range + 200) + 50 ppm/K × set measuring range) × ΔθΔθ = deviation of ambient temperature from the reference operating condition
Long-term stability ≤ 0.1 K/year or 0.05 %/yearInfluence of load ≤ ±0.02 %/100 Ω
Operating conditionsAmbient temperature -40 to +85 °C (-40 to 185 °F)Storage temperature -40 to +85 °C (-40 to 185 °F)Climate class As per EN 60 654-1, Class CShock resistance 4 g/2 to 150 Hz as per IEC 60068-2-6EMC According to IEC 61326 Series and NAMUR
38 mm (1.57"); 3mm (0,12"); w/o TMR35-A11ADLBA1AAA 148.00 138.00 130.0083 mm (3.27"); 3mm (0,12"); w/o TMR35-A11ADLBB1AAA 148.00 138.00 130.0068 mm (2.68"); 3mm (0,12"); w/o TMR35-A11ADLBC1AAA 148.00 138.00 130.0098 mm (3.86"); 3mm (0,12"); w/o TMR35-A11ADLBD1AAA 148.00 138.00 130.00
Accessories Order no. Price/pcs. in USDG1/2 metal to metal weld in adapter 60021387 49.00Configuration kit TXU10 – set-up programme+interface cable for PC with USB-Port. 4 pin plug+ReadWin2000+adapter M12
TXU10-BA 238.00
Cable M12x1 l=5m 51005148 20.00Prices valid until 09.30.2013 in U.S. dollars per unit (not including shipping and applicable sales tax).See Endress+Hauser, Inc. Terms and Conditions of Sale for shipping, tax, and payment terms.
