+ All Categories
Home > Documents > TO INSTALL THE SOFTWARE PUT THE USB LOCK IN COMPUTER …

TO INSTALL THE SOFTWARE PUT THE USB LOCK IN COMPUTER …

Date post: 18-Dec-2021
Category:
Upload: others
View: 2 times
Download: 0 times
Share this document with a friend
19
TO INSTALL THE SOFTWARE PUT THE USB LOCK IN COMPUTER THAN INSTALL OTHERWISE IT WILL GIVE ERROR SO LOCK SHOULD BE ATTACHED IN THE COMPUTER WHILE USING SOFTWARE OTHERWISE GIVE ERRORS IN UPYAS. WHICH PLEASE NOTE. After setup the icon appear in the windows . This setup runs on windows xp, well
Transcript

TO INSTALL THE SOFTWARE

PUT THE USB LOCK

IN COMPUTER THAN

INSTALL OTHERWISE IT WILL GIVE ERROR

SO LOCK SHOULD BE ATTACHED IN THE COMPUTER

WHILE USING SOFTWARE

OTHERWISE

GIVE ERRORS IN UPYAS.

WHICH PLEASE NOTE.

After setup the icon appear in the windows . This setup runs on windows xp, well

But on windows 7 when to install if during installation you ignore a than Start after ignoring two to three time even you install than the software works Prefect. Because of windows 7 one has to ignore during installation. After setup icon appears in window click setup Above windows appears. Click in screen near arun samhita lal kitab This screen appears Be careful if you want to make Varash Phal click mark tick Near Draw Varash Component. Otherwise if you do not click that software will give error if you make varash phal and you had to start again and had to click Than click Give Birth detail - if you want to use software otherwise click Exit the software - you will come out.

The above screen appears Put Name , Father Name click the round Male or female which ever is correct. If you want to make varsh phal tick the round - current year. In years you can make, different varsh phal e.g. 12,14,15 and so on but than You can not prepare current varsh phal ( use any one ) Than click Date/ time of Birth

The above screen appears carefully fill the date and time DD 12 MM 09 YY 2012 Tim HR 12 MI 20 Sec 00 click am or pm

The above screen for place of birth Put place and scroll down sign place come or you fill if station is not in the software than you can put latitude deg e.g. 43 min 32 N or S click N Longitude Deg 74 Min 45 E or W E This way most of the station are in the software but in case rare city you put Longitude and Latitude. Than click next just near the Stop button if you want to go back than click curved button.

After next above screen appears Click on view you will get two point birth detail or varsh phal Click birth detail

Above screen appears. Click on red cross the cross box disappear now you can read About lal kitab

Than click there are four buttons below Do Sabad 1 for zoon 2 for reduces 3 for stop and 4 for print full page 5 arrows for next screen.

Than click black bar next screen will be

This screen next and Red square if you click that will stop the software and if you want to

Next click black next bar near stop button if you want to go back click black Near stop This way next screen

This way next screen

This way next screen If you want to print than go up bar Select change to and print

If you click print the page will be printed.

Next screen

Next screen You can see varsh phal which click on appropriate box which ever you want to see and print again on task bar print and will print this page.

Next screen

Next screen

Next screen This screen have all planets details if you click Jupiter than only Jupiter detail will come if you click next sun than sun detail will comes In this way this screen has 9 pages and tells the details of Nature of Planets.

Next screen

In this screen you can know the detail of all planets while clicking on sun, moon etc.

Next when click the black arrow This screen confirms the strength of planets after drishti of each planet and if you want to print you can print from toolbar print will print this page.

This screen confirm the falit of the kundali as per lal kitab

You can print while clicking on printer icon near stop red button and Can scroll downward vertical bar below swastika sign. If you want to print the entire predictions will be printed.

Next screen pay as per lal kitab work like flit screen. You can print while clicking on printer button near stop button and also you may scroll for reading. PS IF YOU PRINT THERE IS NO NEED FOR SCROLL THE WHOLE PAGES MAY 5 TO 10 DEPENDS UPON KUNDALI WILL BE PRINTED IN THE PRINTER.

NEXT screen kharabadari means the jatak will be aware about adverse points in the kundli.

Next screen rin patri if there is no rin pitri In the horoscope the result will be nil But if positive results only than software will predict as per horoscope.

Next screen end of kundali predictions and you have click on stop icon than The above screen will appears. Here you can see the varsh phal, PS BE CAREFUL IF YOUR FROM THE BEGINNING CLICK THE VARAS PHAL ONLY THAN VARASH PHAL WILL COME OTHERWISE IT GIVES ERROR. AND THAN YOU HAVE TO START FROM BEGINNING AND FILL THE DAT. PS IN THIS SOFTWARE DATA CAN NOT BE SAVED YOU CAN SEE AND CAN PRINT THE HOROSCOPE. In this screen click on bar view you will get this screen

Now click on the scroll bar near stop here varsh year will automatically calculate the software The following screen appears click the year.

After that click the start icon near the scroll of year.

Varash phal will appear and than click the black arrow for next forward. If you want to go backward you may click on black icon reverse side.

Nature of planets and can also see all planets while clicking each planets. If you want to print you have to print one by one which ever is on the screen.

Next screen relationship among planets. Real grammar of lal kitab is in this screen.

Next screen tatkalik matri as per lal kitab arun sahmital.

Next screen planets and houses strength. Only.

Next screen planets and house strength. Here the pay is of varsh phal can scroll but if you want to print than Entire printing will appear and on printer. Here is the end of varsh phal if one is ready to go in see the backward kundali is needed.


Recommended