4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
TOKYO KEIKI Solid State High Power Amplifiers
Description
TOKYO KEIKI offers customized RF and Microwave Solid State Power Amplifiers for a wide range of Markets
including Defense Systems, Satellite Communication, Broadcast TV & Radio, Microwave Test Equipment and
others. High power and high efficiencies are realized through innovative circuit topology techniques and
optimum semiconductor device technologies. The circuit topology techniques include Single ended
configurations, Power combining configurations, Doherty configurations, Feed Forward techniques and Digital
pre-distortion techniques. Semiconductor device technologies used include LDMOS FETs, GaAs FETs and GaN
HEMTs.
TOKYO KEIKI will produce customized Solid State Power Amplifiers per the examples below.
Frequency Power (1dB Compression)
L - Band 0.5 to 1.5 GHz ~53 dBm
S - Band 2.0 to 4.0 GHz ~53 dBm
C - Band 4.0 to 8.0 GHz ~53 dBm
X - Band 8.0 - 12.0 GHz ~53 dBm
Ku - Band 12.0 - 18.0 GHz ~53 dBm Note: Custom requirements for frequency ranges and higher powers can be accommodated
Specialized Solid State Power Markets
Frequency (MHz)
Typical Power Features
Chemical Analysis - Nuclear Magnetic Resonance Spectroscopy 10 - 500 250W
• 19 inch Rack Mounted Enclosure • Power Supply • Power Control • Power Monitors • Power Alarms
Digital TV Relay Stations 470 - 770 50W • 19 inch Rack Mounted Enclosure • For Digital ISDB-T
Weather Radar Systems 9000 - 10000 130W • Compact & Light Weight Packaging • High Efficiency
Note: Custom requirements for frequency ranges and higher powers can be accommodated
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
TOKYO KEIKI Solid State High Power Amplifiers
NMR Amplifier Example:
Tokyo Keiki offers very specialized RF and Microwave Power Amplifiers such as Amplifiers for NMR
Spectroscopy applications which require exceptional pulse fidelity (rise time, tilt, fall time) and gain & phase
linearity. Other features include:
• Broadband Frequency Range of 10MHz to >500MHz, typically achieved by splitting the frequency
range into 2 bands
• 250W Power Output from a single Multi-stage LDMOS FET Amplifier. Higher powers can be achieved
by combining power from 2 or more Multi-stage LDMOS FET Amplifiers.
• 60dB gain (other Gains can be accommodated)
• Power Output Control Available
• Power Output Monitor Available
• Power Supply to accommodate AC Power input
• 19 inch rack mounted enclosure
• Typical Block Diagram of Single Multi-Stage Amplifier:
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
TOKYO KEIKI Solid State High Power Amplifiers
X-Band Amplifier Example:
Tokyo Keiki offers very specialized RF and Microwave Solid State High Power Amplifiers (SSPAs) over
frequencies from less than 500MHz to greater than 18GHz. An X-Band SSPA Example is shown below.
X Band GaN SSPA S21,S11,S22
2
3
4
5
6
7
8
9
10
11
12
9 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10
Frequency [G Hz]
S21 [dB]
-20
-15
-10
-5
0
5
S11/S22 [dB]
S21 S22 S11
X Band GaN SSPA In/Out & D.Eff.(Experimental Data)
35
40
45
50
55
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
Pin [dBm]
Pout [dBm]
20
30
40
50
60
Eff. [%]
9.3G Hz 9.4G Hz 9.5G Hz 9.6G Hz
9.7G Hz 9.8G Hz 効率-9.3G Hz 効率-9.4G Hz
効率-9.5G Hz 効率-9.6G Hz 効率-9.7G Hz 効率-9.8G Hz
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
TOKYO KEIKI Solid State High Power Amplifiers
Ku-Band Amplifier Example:
Tokyo Keiki offers very specialized RF and Microwave Solid State High Power Amplifiers (SSPAs) over
frequencies from less than 500MHz to greater than 18GHz. A Ku-Band SSPA Example is shown below.
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
TOKYO KEIKI Solid State High Power Amplifiers
SSPA Examples: