1
MICR~ACE FINISHING PRODUCTS, INC. www.micro-'surface.com Phone:563-732-3240; 1-800-225-3005 Fax: 563-732-3390 E-mail: [email protected] Ultra-flexible MICRO-MESH TM MXD cushioned diamond abrasives are engineered to provide lower RA finishes while removing up to 70% less stock. For critical surface finishing of hard metal alloys and ceramics. Increase output while low- ering labor costs. Circle 049 on reader service card MOLECTRICS www.molectrics.com Phone: 216-641-0090 Fax: 216-641-1337 E-mail: platerman @ raSh.COrn Molectrics' Power Kleen 500 Electropolishing Solution can be used for all metals. Featuring micro reduction, superior deburring, and improved passivation, the self-contained sys- tems are simple to operate and offer a zero-dis- charge option. Circle 050 on reader service card MET-CHEM www.metchem.com Phone: 216-881-7900 Fax: 216-881-8950 E-mail: [email protected] Met-Chem Inc. manufactures wastewater treat- ment equipment including filter presses, clari- tiers, and sludge dryers. A special service pro- vided by Met-Chem is the sales of refurbished used equipment. Complete wastewater treat- ment systems can be manufacturered using refurbished filter presses, clarifiers, tanks, and mixers. When refurbished, this equipment is "as good as new," but available sooner and at a sub- stantially lower price. Cirde 047 on reader service card POLY PRODUCTS www.poly-products.com Phone: 216-391-7659 Fax: 216-881-8991 E-mail: info@ poly-products.com Poly Products Co. manufactures the Evaporative Tank TM atmospheric evaporator.This unit evapo- rates water from plating and wastewater solu- tions. When coupled with the ET-Companion Condenser TM this system can recover all your plating chemicals as well as return the evaporat- ed water for reuse. This system can also be combined with our Heated Tank Evaporative SystemTMtoprovide a turnkey approach to evap- oration with evaporator, condenser, tank, heat- ing source, pump, and controls. Circle 052 on reader service card PARTS Cl ~ANING TECHNOI_L)GIES www.partscleaningbgky.com Phone: 317-241-9379 Fax: 317-241-1060 E-mail: [email protected] Need Metal Finishing Help??????? • Out-sourced Contract Cleaning • Solvents Distribution • Waste Disposal Services • New and Used Equipment • Complete Field Services Contact: Parts Cleaning Technologies Circle 051 on reader service card UNIVERTICAL CORP. www.univertical.com (~lo~k~t Benchmark of Q~ w~,~a,univertical.com Phone: 260-665-1500 Fax: 260-665-1400 E-mail: sales @ univertical.com World Class Manufacturing Facilities in the U.S. and China • Cyanide blending and packaging • 99.95% pure copper anodes • EN-grade nickel sulfate • Nickel bath recycling Circle 056 on reader service card TOLBER DIVISION PYRAMID PLASTICS, www.tolber.com Phone: 870-777-3251 INC. Fax: 870-777-8056 E-mail: [email protected] XP-410 is a peelable stop-off lacquer for electro- less nickel, hard coat anodizing, and chemical milling. However, this product incorporates peel- ability with VOC-free properties. These charac- teristics help reduce VOC emissions and the need for volatile stripping solvents. Circle 055 on reader service card ACT LABORATORIES www.actlaboratories.com Phone: 248-347-4103 Fax: 248-347-6574 E-mail: ron.swinko@ actlaboratories.com ACT Laboratories offers one of the industry's most extensive facilities for providing test panels and testing services. Capabilities include fabrica- tion of test panels from a variety of metals and plastics and application of pretreatments and paint systems. The accredited testing lab pro- vides a wide range of testing services including performance of paint, plastic, textiles, and metals. Circle 057 on reader service card Fall 2005 9
