Royalty Well Service is the foremost Oil & Gas Well Plugging & Abandonment specialists in the southern United States. With a fleet of rigs that have been custom designed for Plugging & Abandonment (P&A) and casing recovery operaons, we can confidently say that we provide superior service when compared to other P&A companies. Royalty Well Service is completely focused on P&A and has compiled the knowledge, equipment, and specialized workforce to best serve the oil & gas industry. Plugging Rig Capabilities: - Service King 675 HP Rigs - Operational capabilities of up to 25,000 ft. - Capable of 300,000lb hook load instantaneously - 104 ft. 350,000lb mast Safety is of utmost importance at RWS. Our employees have received Safeland, H2S, CPR, and First Aid Training. Daily safety meetings and JSA’s are also performed. www.RoyaltyWellService.com
Transcript
Royalty Well Service is the foremost Oil & Gas Well Plugging & Abandonment specialists in the southern United States. With a fleet of rigs that have been custom designed for Plugging & Abandonment (P&A) and casing recovery operations, we can confidently say that we provide superior service when compared to other P&A companies. Royalty Well Service is completely focused on P&A and has compiled the knowledge, equipment, and specialized workforce to best serve the oil & gas industry.
Plugging Rig Capabilities:- Service King 675 HP Rigs- Operational capabilities of up to 25,000 ft.- Capable of 300,000lb hook load instantaneously- 104 ft. 350,000lb mast
Safety is of utmost importance at RWS. Ouremployees have received Safeland, H2S, CPR, and First Aid Training. Daily safety meetings and JSA’s are also performed.
Rigs & AgeSix Service King rigs built exclusively for plugging operations. Rigs manufactured in 2010, 2011 & 2012. Rated at 675 HP
In many cases, well servicing rigs are converted for plugging operations. Usually in service 15-25 years. Average horsepower rating at 400 HP
Pulling Capacity
Normal daily pulling capacity at 250,000# with 30 minute conversions can pull up to 300,000#
Normal daily pulling capacity at 110,000# - 125,000# range
Casing Jacks
Casing jacks available up to 500,000# capacity, but are rarely needed because of rig capacity.*Huge time savings. Eliminates many hours of rigging up and down of casing jacks. Also eliminates casing jack charges. Reduces overall P&A cost.*
Forced to rig up casing jacks at weights in excess of 125,000#
Wireline20,000 FT E-Line, 5,000# Grease Head Lubrication, 5,000# BOP, Freepoint Tools, Casing/ Tubing Cutting, Perforating
Many companies must use 3rd party companies for these services
BOP AgeHydraulic BOP’s that are less than 5 years old & rated to 5,000 PSI
Over 10 years old and in many cases only rated to 3,000 PSI
ToolsRig tongs for tubing: Casing tongs:2-3/8” - 3-1/2” 4- 1/2” - 13-3/8” Casing tongs are typically rented
InsuranceGeneral Liability Coverage - $13,000,000*RWS & The McDaniel Company Combined* Industry AVG - $2,000,000 - $5,000,000
Services Offered
Self sufficient with most services including rig complete w/ tools, BOP’s, wireline, slickline, jet cement mixing and pumping capabilities, casing jacks, water & mud hauling, backhoe/loader, and welder
Many companies must use 3rd party companies for these services
Safety ISNetworld, Safeland USA, PEC Premier Ask your P&A contractor if they have all three
PeopleHaving the best equipment means nothing without an exceptional crew of people to operate it. Our people are thoroughly trained, knowledgeable, experienced and dedicated to safe and efficient plug and abandonment operations
So how does Royalty Well Service compare to other P&A companies?
