Tool Identification
Each of the tools on these slides are common tools found in most
homes, or are pieces of equipment we will specifically use
for our Lamp project. How many of these can you
name? Lets find out!
Tool #1
Tool #1 = Needle Nose PliersOther Information:
These are a Common Household Tool. Most homes will have a pair. They are used for gripping small objects.
Tool #2
Tool #2 = Claw Hammer
Claw
Other Information:
The claw portion of a claw hammer is used mostly for removing nails.
Tool #3
Tool #3 = Hobby Knife
Other Information:This kind of knife is used for cutting small delicateitems such as the film we use for screen printing.
Tool #4
Tool #4 = Abrasive Paper
Other Information:
Often referred to as ‘sandpaper’,
(there are many different types and sizes of particles that can be glued to the backing paper in order to smooth the intended materials)
Tools #5 and #6
Tool #5 = Ink KnifeTool #6 = Squeegee
Other Information:
The ink knife is used to apply ink to the squeegee, the squeegee is used then to apply the ink to a screen during screen printing.
Tool #7
Tool #7 = Tape Measure
Other Information:
A tape measure is a form of flexible ruler.
The earliest uses were for tailoring (sewing).
Tools #8 and #9
#8
#9
#8 = Phillips Head Screwdriver#9 = Flathead Screwdriver
#8 #9
Other Information:
A phillips head screwdriver is used for screws and bolts with a “+” pattern in them:
Other Information:
A flathead screwdriver is used with screws or bolts that have a slotted pattern in them:
Tool #10
Tool #10 = Scissors
Other Information:
A basic cutting tool, the earliest record of scissors is from Ancient Egypt, over 2,000 years ago!
Tool #11
Tool #11 = Spirit Level
Other Information:
This tool is used to determine if an item is perfectly horizontal (“level”) or vertical (“plumb”).
The term “spirit” refers to the liquid in the tube – which usually a form of alcohol or “spirit”.
Tool #12
Tool #12 = Ruler
Other Information:
Originally called a “rule” the more common term for this measuring device is now “ruler”.
Tool #13
Tool #13 = Allen Wrench
Other Information:
Also known as a “Hex Key” these are used with screws or bolts with a hexagonal tip:
Tool #14
Tool #14 = File
Other Information:
Used to “file” or smooth the edges of a material (like wood or metal)
Tool #15
Tool #15 = Safety Glasses
Tool #16
Tool #16 = Masking Tape
Other Information:
Masking tape was invented in 1925 by an auto engineer Richard Drew: its original use was for marking off areas where auto body paint wasn’t wanted.
Tool #17
Tool #17 = Compass
Other Information:
Most commonly used to draw “perfect” circles.
Tool #18
Tool #18 = Chisel and Punch Set
Other Information:
Chisels remove material in strips or chunks.
Metal Punches make dents in metal, usually to mark a drilling spot.
Tool #19
Tool #19 = Drill Bits
Other Information:
Drill bits are used with a hand drill or a drill press to drill holes in material.
Power Drill
Drill press
Tool #20
Tool #20 = Mallet
Other Information:
Mallets are generally used when a “softer” strike is desired (compared to a metal hammer) When you need to strike an object without denting it or damaging it.
