ToolHire_2005

TOOLHIRETOOL AND EQUIPMENT HIRE 2005

INTR

ODUC

TION

2

HELPING YOU BUILD YOUR BUSINESS

Welcome to the new Jewson Tool Hire catalogue. In it you will find all the tools andequipment you need to keep you building.

WHY HIRE FROM JEWSON?� No investment required� No maintenance or downtime� Quality equipment from top brand manufacturers� Equipment delivered and collected from site

to suit your requirements� Hire and building materials under one roof

– no need to go elsewhere� Over 160 branches across the UK� Full instructions and safety equipment

with all hires� Accessories available on sale or return

GOT AN ACCOUNT?Simply phone or visit your nearest Tool Hire branchand charge all your equipment hire and materialsto your account.

NO ACCOUNT?Simple. We accept:� Visa� Switch� MasterCard� Cheque/Cash

Or you can apply for a Jewson Credit Account.Non-account customers will be required to pay a depositequivalent to three times the weekly hire rate andproduce two forms of ID showing your addresse.g. driving licence or recent utility bill. Deposits will bereturned on completion of the hire.

FLEXIBLEHIRE PERIODS

24 HOURSFirst 24 hour period.

ADDITIONAL 24 HOURSEvery day after the first 24 hours, up to theequivalent weekly hire rate and thereafter.

WEEKENDFriday 3pm to Monday 9am.*

*Special rates for Bank Holiday weekends.

WEEKHire rate for each consecutive 7 day period.

FOR GENERAL ADVICEAND QUERIES,

CALL 0800 539766

Jewson is a member of the Hire Association Europe, which is theauthoritative body representing and protecting the Hire Industry.

HIGH LIFT PALLET TRUCKSee page 28

PLEASE SEE PAGES 70-73 FOR YOUR NEAREST TOOL HIRE BRANCH 3

CONTENTS6 ACCESS EQUIPMENT

Ladders, Steps, Trestles, Boards, Powered Access, Alloy Towers

12 CONCRETE & CUTTING EQUIPMENTConcrete Mixers, Floats, Vibrating Pokers, Vibrating Screeds, Floor Preparation,Cutting & Chasing, Block Splitters, Diamond Drilling, Saws

18 SITE EQUIPMENTSaws, Props, Rubbish Chutes, Skip Hire, Site Safety, Skip Ramp, Damp Proofing,Site Security, Site Accommodation & Storage, Fencing & Hoarding, Toilet Hire

27 LIFTING & MOVING EQUIPMENT

29 EARTH MOVINGExcavators, Loaders, Dumper Truck, Trailer

31 COMPACTIONPlate Compactors, Vibrating Compactors

33 POWER TOOLSDrilling, Mixer, Drills & Attachments, Woodworking, Grinders, Saws,Fixing Equipment, Sanders, Needle Gun

43 TILING

44 BREAKING & DEMOLITIONBreakers, Hydraulic Breakers

46 LIGHTING & POWERGenerating, Lighting, Transformers, Site Distribution

49 PUMPING EQUIPMENT

50 SURVEYING EQUIPMENT

52 HEATING, DRYING & COOLINGHeaters, Dryers, Air Conditioning, Damp Proofing

54 PLUMBING EQUIPMENTPipe Threading, Pipe Bending, Testing, Pipe Freezing, Drain Clearing

56 CLEANINGVacuum Cleaners, Pressure Washers

58 FLOORING PREPARATIONFloor Cleaning/Preparation, Flooring Equipment

59 EXTRACTORS

60 DECORATINGSpray Equipment, Strippers, Tyrolean Machine

61 LANDSCAPINGLawn Care, Shredders, Rotavators, Chainsaws, Trimmers, Fencing Equipment,Hand Blower, Hand Pruner

67 MISCELLANEOUS EQUIPMENTBlow Torch Drying Gun, Sash Clamp, Personal Protective Equipment

68 TOOLS FOR SALE

70 TOOL HIRE BRANCHES

74 INDEX

NEW

KANGA KIDSee page 30

MEDIUM DUTY SDS ROTARY DRILLSee page 34

DeWALT CORDLESS NAILERSee page 40

LONG REACH HEDGE TRIMMERSee page 64

NEW

NEW

NEW

NEW

SAFE

TY

4

We stock a full range of site safety and personal protection equipment to help make sure you andyour employees are safe. Throughout the catalogue you will see the following safety symbols.Always use the correct safety equipment.

EYE PROTECTIONWear suitable goggles, minimum EN166 Grade B. Welding masks will be supplied withwelding equipment.

DUST MASKSThis equipment creates dust and a suitable dustmask (e.g. fold flat to minimum EN149)or respirator should be worn.

EAR DEFENDERSThis equipment has high noise levels andearplugs or general purpose ear defendersshould be worn.

SAFETY FOOTWEARWhere a risk to the feet is present we recommendthe use of industrial footwear incorporating steeltoecaps, to EN345.

PROTECTIVE GLOVESThis equipment presents a hazard to your hands.Appropriate gauntlets, PVC, cotton or rigger glovesshould be worn.

SAFETY HELMETSMust always be worn on construction sites buthelmets are recommended with some itemsof equipment wherever it is used, to theminimum of EN397.

DIAMOND WHEELDiamond products are available for this machine.They are safer to use, eliminating the risk ofwheels shattering, and have a much longerworking life.

POWER BREAKERRCD UNITSA Residual Current Device provides protectionagainst electric shock. We recommendRCDs when using electrical equipment (240 volt)outside or in damp conditions.

VIBRATION PROTECTIONHand-arm vibration syndrome is caused byregular exposure to vibration and can lead toserious, permanent injury and disability.

To assist customers in the hiring of ourequipment, we have included a safety symbol inthis catalogue to identify items that can pose apotential risk due to vibration. It is an employer’sresponsibility to ensure the safety of theiremployees in respect of the tools that they asktheir employees to work with.

To make selecting the right piece of equipmenteasier for our customers and with knowledge inrespect of any harmful vibration impacts, we haveprinted the safety symbol and manufacturers’figures for vibration risk in m/s2 against therelevant product. The greater this figure, thegreater the vibration.

At the time of publication of this catalogue,The Hire Association Europe gives guidance todistinguish low, medium and high risk items as follows:

Low risk = less than 2m/s2

Medium risk = 2.8m/s2 to 5.6m/s2

High risk = over 5.6m/s2

Important: These figures are based oninformation given to us by the product suppliersor manufacturers and Jewson does not representthat it has any expertise in vibration assessment.Any hirer requiring the actual vibration readingfor any product on hire from Jewson, shouldenquire as soon as possible prior to hire, whenevery effort will be made by Jewson to obtainprecise data from the product manufacturer intime for the intended hire.


THE JEWSON TOOL HIRE PROM

ISEFAST SERVICEAll Jewson Tool Hire enquiries are dealt with quickly andcourteously. And we deliver fast too – usually within 4 hours– so you’re not hanging around. In the unlikely event of usnot having the item you require in stock we guaranteedelivery of that item to you within 24 hours.

PROFESSIONALKNOWLEDGEABLE STAFFAll Jewson Tool Hire staff have a comprehensive knowledgeof our equipment and its uses. This ensuresa prompt, helpful service for all our customers.

RETURNING GOODS NATIONWIDEBecause we have a national network, all equipmenthired from us can be returned to any of our Tool Hirebranches nationwide.

THE BEST EQUIPMENTJewson only stock the highest quality branded equipment.After every hire, each item undergoes a full service with all maintenance carried out by qualified technicians.Our standards of service meet those set by the HireAssociation Europe (HAE) and are constantly monitored.

COMPETITIVE PRICESJewson have adopted a national pricing policy and operatelocal flexibility to ensure we maintain our renownedcompetitive position. We also provide clear documentationand price details to make the process as hassle-freeas possible.

EVEN IF WE DON’T STOCK IT, WE CAN STILL GET ITOccasionally you may need to hire specific products whichare not listed in this catalogue. Jewson can get hold of anyequipment you need, giving you the added benefit ofhiring all you need from one source, leaving you to geton with the job.

ACCIDENTAL DAMAGE PROTECTIONNow you can hire all the tools you need with completeconfidence. Our Accidental Damage Protection scheme (ADP)covers you against accidental damage when hiring our toolsand equipment. Full details are available at our branches.

SALE OR RETURNWhen hiring, you can take all the accessories you may needon a sale or return basis. This saves time and money. All weask is that unused goods are returned in mint condition.

HOW TO PLACE YOUR ORDERSIMPLY VISIT THE BRANCH, PHONE OR FAX THE BRANCHDIRECT OR CALL 0800 539766.

TERMS AND CONDITIONS OF HIREFull terms and conditions of the hire are detailed on thereverse of your hire contract.

VAT 24 HRS ADDT 24 HRS WEEKEND WEEK

Exc. £15.00 £6.00 £18.00 £30.00Inc. £17.63 £7.05 £21.15 £35.25


Exc. £17.00 £6.80 £20.40 £34.00Inc. £19.98 £7.99 £23.97 £39.95


Exc. £19.00 £7.60 £22.80 £38.00Inc. £22.33 £8.93 £26.79 £44.65


Exc. £17.00 £6.80 £20.40 £34.00Inc. £19.98 £7.99 £23.97 £39.95


Exc. £13.00 £5.20 £15.60 £26.00Inc. £15.28 £6.00 £18.33 £30.55

ACCE

SS EQ

UIPM

ENT

6

LADDERS

Easy to handle rigid ladder. Non-slip, flat toprungs and solid moulded rubber feet atboth ends.

SPECIFICATIONS� Closed height: 3.43m� Extended height: 6.2m� BS2037 Class 1 1994� Weight: 15kg

0002 DOUBLE LADDER ALLOY3.43m-6.2m


Easy to handle rigid ladder. Non-slip, flat toprungs and solid moulded rubber feet atboth ends.

SPECIFICATIONS� Closed height: 3.43m� Extended height: 8.96m� BS2037 Class 1 1994� Weight: 33.6kg

0020 TRIPLE LADDER ALLOY8.96m






BS2037 Class 1 1994


Exc. £12.00 £4.80 £14.40 £24.00Inc. £14.10 £5.64 £16.92 £28.20


Exc. £30.00 £12.00 £36.00 £60.00Inc. £35.25 £14.10 £42.30 £70.50


Exc. £19.00 £7.60 £22.80 £38.00Inc. £22.33 £8.93 £26.79 £44.65


Exc. £30.00 £12.00 £36.00 £60.00Inc. £35.25 £14.10 £42.30 £70.50


ACCESS EQUIPMENT

LADDERS

Heavy-duty rope operated ladder with wallrunning wheels and interlocking stiles.


0030 TRIPLE LADDER ALLOY ROPEOPERATED 5.94m-15.47m

Lightweight, combines strength of trade ladderwith heavy-duty ridge hook. Non-slip rungs,box section stiles, rubber covered bearer barsand fitted with safety catches.

SPECIFICATIONS� Closed height: 4.3m� Extended height: 7.67m� Weight: 18kg

0065 EXTENSION ROOF LADDER4.3m-7.67m

Can be used: free-standing, single, double ortriple extension and as a trestle or stairwayladder or as a working platform.

SPECIFICATIONS� Closed height: 3.6m� Extended height: 8.6m� Weight: 28.8kg

0018 3 PART COMBINATIONLADDER 3.6m-8.6m

For use in electrical hazard environments.Large D-shaped rungs, round PVC non-slip feetand double safety catch.

SPECIFICATIONS� Closed height: 3.93m� Extended height: 7.2m� Weight: 20kg

0043 FIBREGLASS EXTENSIONLADDER 3.93m-7.2m

BS2037 Class 1 1994


Exc. £8.00 £3.20 £9.60 £16.00Inc. £9.40 £3.76 £11.28 £18.80


Exc. £11.00 £4.40 £13.20 £22.00Inc. £12.93 £5.17 £15.51 £25.85


Exc. £11.00 £4.40 £13.20 £22.00Inc. £12.93 £5.17 £15.51 £25.85


Exc. £9.00 £3.60 £10.80 £18.00Inc. £10.58 £4.23 £12.69 £21.15


Exc. £10.00 £4.00 £12.00 £20.00Inc. £11.75 £4.70 £14.10 £23.50


Exc. £25.00 £10.00 £30.00 £50.00Inc. £29.38 £11.75 £35.25 £58.75


Exc. £8.00 £3.20 £9.60 £16.00Inc. £9.40 £3.76 £11.28 £18.80

ACCE

SS EQ

UIPM

ENT

8

STEPS TRESTLES

For use in electrical hazard environments.Non-slip treads and feet and has a robustworking platform.

SPECIFICATIONS� Closed height: 2.69m� Open height: 2.44m� Certified to BSEN131

0045 10 TREAD FIBREGLASS STEPS

Unique strengthening beam incorporated intonon-slip treads, rubber feet, aluminium sidearms, rigid box section back legs withadditional cross braces and ‘K’ straps.

SPECIFICATIONS� Closed height: 2.82m� Open height: 2.57m� Number of treads: 12� Weight: 7.5kg� Certified to BSEN131, BS2037 Class 1

0085 STEP LADDER ALLOY 2.57m

Mobile tower platform ideal for interior access.For decorating and maintenance.

SPECIFICATIONS� Size h x w: 1.8m x 700mm� Safe working load 275kg per deck,

415kg per scaffold structure

1400 FOLDING LOW LEVELPLATFORM

SPECIFICATIONS� Closed height: 1.64m� Open height: 1.47m� Certified to BSEN131

0044 6 TREAD FIBREGLASS STEPS





Certified to BSEN131

Certified to BS2037 Class 1

Certified to BSEN131and BS2037 Class 1

SPECIFICATIONS� Weight: 15.9kg� Certified to BS2037 Class 1

0145 PAINTER’S TRESTLE 2.3m


Exc. £6.00 £1.20 £6.00 £6.00Inc. £7.05 £1.41 £7.05 £7.05


Exc. £6.00 £1.20 £6.00 £6.00Inc. £7.05 £1.41 £7.05 £7.05


Exc. £6.00 £1.20 £6.00 £6.00Inc. £7.05 £1.41 £7.05 £7.05


Exc. £9.00 £3.60 £10.80 £18.00Inc. £10.58 £4.23 £12.69 £21.15


Exc. £4.00 £0.80 £4.00 £4.00Inc. £4.70 £0.94 £4.70 £4.70


Exc. £19.00 £7.60 £22.80 £38.00Inc. £22.33 £8.93 £26.79 £44.65


Exc. £14.00 £5.60 £16.80 £28.00Inc. £16.45 £6.58 £19.74 £32.90


Exc. £17.00 £6.80 £20.40 £34.00Inc. £19.98 £7.99 £23.97 £39.95

Certified toBS1139 Part 4 1982


ACCESS EQUIPMENT

TRESTLES

BOARDS

Lightweight and quick to erect. Fixed leg –quick to install. Captive locking pin – no sitelosses, increased longevity. Suitable for workingloads of up to 460kg.

SPECIFICATIONS� Painted finish� Fixed leg� Pin located by steel ring� Closed height: 0.51m� Extended height: 0.71m� Certified to BS1139 Part 4 1982

0160 ADJUSTABLE TRESTLE SIZE 1

Certified to BS2037 Class 1

Suitable for various handrail systems, non-sliprot proof decking, rubber inserts, aluminiumand wood struts, heavy-duty rubber end capsand ‘K’ straps fitted to end struts.

SPECIFICATIONS� Certified to BS2037 Class 1� Weight: 26.2kg

0101 STAGING PRO BOARD3.6m x 600mm





Minimum One Week Hire


Minimum One Week Hire Minimum One Week Hire

Used when working at height on stagingboards. Necessary at staging board level of 2mor more. Sits at waist and knee height with clipto hold toeboard in place for extra safety.

0127 STAGING PRO BOARDGUARD RAIL UNIT

Standard scaffolding board.

SPECIFICATIONS� Size l x w x d: 3900mm x 225mm x 38mm

0130 SCAFFOLD BOARDSPECIFICATIONS� Weight: 48.5kg

0116 STAGING PRO BOARD6m x 600mm

SPECIFICATIONS� Weight: 31.5kg

0111 STAGING PRO BOARD4.8m x 600mm

ACCE

SS EQ

UIPM

ENT

10

POWERED ACCESS

We supply a range of powered access. All heights available, please ask for details.

SCISSOR LIFT

BOOM LIFT

Price on applicationFor further details, please contact your local Jewson branch or Freephone

0800 539766

2m x 2.5m x TOWER VAT 24 HRS ADDT WEEKEND WEEK0.72m 0.72m HEIGHT 24 HRS

1401 1501 2.34m Exc. £28.80 £9.60 £28.80 £48.00

Inc. £33.84 £11.28 £33.84 £56.40

1403 1503 3.27m Exc. £33.00 £11.00 £33.00 £55.00

Inc. £38.78 £12.93 £38.78 £64.63

1404 1504 3.73m Exc. £37.20 £12.40 £37.20 £62.00

Inc. £43.71 £14.57 £43.71 £72.85

1406 1506 4.66m Exc. £40.80 £13.60 £40.80 £68.00

Inc. £47.94 £15.98 £47.94 £79.90

1408 1508 5.59m Exc. £44.40 £14.80 £44.40 £74.00

Inc. £52.17 £17.39 £52.17 £86.95

1410 1510 6.52m Exc. £49.20 £16.40 £49.20 £82.00

Inc. £57.81 £19.27 £57.81 £96.35

1412 1512 7.45m Exc. £58.80 £19.60 £58.80 £98.00

Inc. £69.09 £23.03 £69.09 £115.15

1413 1513 7.91m Exc. £62.40 £20.80 £62.40 £104.00

Inc. £73.32 £24.44 £73.32 £122.20

1415 1515 8.84m Exc. £67.20 £22.40 £67.20 £112.00

Inc. £78.96 £26.32 £78.96 £131.60

1416 1516 9.30m Exc. £73.20 £24.40 £73.20 £122.00

Inc. £86.01 £28.67 £86.01 £143.35

You should tie in towers of all heights wherever possible, as it is safe practice to

do so. Towers of 12m and above are legally required to be tied in.

11

ACCESS EQUIPMENT

A range of 0.72m wide alloy towers ideal for use in areas of restrictedspace. Conforms to all current health and safety requirements. Lightweight yet strong and durable. Easy to erect.

SINGLE WIDTH ALLOY TOWERS– 0.72m WIDE

ALLOY TOWERS

Easy to erect, strong, lightweight and sturdy range of 1.35m widealloy towers. Conforms to all current health and safety requirements.

DOUBLE WIDTH ALLOY TOWERS– 1.35m WIDE

DIN 4422-1 1992-08 (HD 1004)

2m x 2.5m x TOWER VAT 24 HRS ADDT WEEKEND WEEK1.35m 1.35m HEIGHT 24 HRS

1601 1701 2.34m Exc. £40.80 £13.60 £40.80 £68.00

Inc. £47.94 £15.98 £47.94 £79.90

1603 1703 3.27m Exc. £44.40 £14.80 £44.40 £74.00

Inc. £52.17 £17.39 £52.17 £86.95

1604 1704 3.73m Exc. £46.30 £15.40 £46.30 £77.00

Inc. £54.40 £18.13 £54.40 £90.67

1606 1706 4.66m Exc. £51.00 £17.00 £51.00 £85.00

Inc. £59.93 £19.98 £59.93 £99.88

1608 1708 5.59m Exc. £53.40 £17.80 £53.40 £89.00

Inc. £62.75 £20.92 £62.75 £104.58

1610 1710 6.52m Exc. £58.80 £19.60 £58.80 £98.00

Inc. £69.09 £23.03 £69.09 £115.15

1612 1712 7.45m Exc. £66.00 £22.00 £66.00 £110.00

Inc. £77.55 £25.85 £77.55 £129.25

1613 1713 7.91m Exc. £67.80 £22.60 £67.80 £113.00

Inc. £79.67 £26.56 £79.67 £132.78

1615 1715 8.84m Exc. £78.00 £26.00 £78.00 £130.00

Inc. £91.65 £30.55 £91.65 £152.75

1618 1718 10.23m Exc. £86.40 £28.80 £86.40 £144.00

Inc. £101.52 £33.84 £101.52 £169.20

1620 1720 11.16m Exc. £97.20 £32.40 £97.20 £162.00

Inc. £114.21 £38.07 £114.21 £190.35

1623 1723 12.55m Exc. £114.00 £38.00 £114.00 £190.00

Inc. £133.95 £44.65 £133.95 £223.25

1626 1726 13.94m Exc. £124.80 £41.60 £124.80 £208.00

Inc. £146.64 £48.88 £146.64 £244.40

1628 1728 14.87m Exc. £127.20 £42.40 £127.20 £212.00

Inc. £149.46 £49.82 £149.46 £249.10

1630 1730 15.8m Exc. £134.40 £44.80 £134.40 £224.00

Inc. £157.92 £52.64 £157.92 £263.20

PLEASE SEE PAGES 70-73 FOR YOUR NEAREST TOOL HIRE BRANCH


Exc. £40.00 £16.00 £48.00 £80.00Inc. £47.00 £18.80 £56.40 £94.00


Exc. £6.50 £2.60 £7.80 £14.00Inc. £7.64 £3.06 £9.17 £16.45


Exc. £16.00 £6.40 £19.20 £32.00Inc. £18.80 £7.52 £22.56 £37.60


Exc. £25.00 £10.00 £30.00 £50.00Inc. £29.38 £11.75 £35.25 £58.75


Exc. £15.00 £6.00 £18.00 £30.00Inc. £17.63 £7.05 £21.15 £35.25


Exc. £16.00 £6.40 £19.20 £32.00Inc. £18.80 £7.52 £22.56 £37.60

CONCRETE MIXERS

FLOATS

Cast aluminium blade smooths wet concrete tothe required finish. Long handle twists andswivel head angles the blade for pushing orpulling across the slab.

SPECIFICATIONS� Total handle length: 5.4m� Weight: 10.1kg

2030 EASY FLOAT c/w SWIVEL & HANDLES

2022 POWER FLOATFINISHING PAN

Medium-weight machine with hydraulic raiseand fall control system for the working blades.Reliable ‘dead man’ folding handle fitted toeach machine.

SPECIFICATIONS� Petrol driven� Noise level: 85dBA� Vibration level: 6.6m/s2

2020 POWER FLOAT900mm (36”)

Portable and lightweight 90 litre mixer. Fitsthrough narrow doorways and small enough fora car boot. Wheel this mixer right to the job oron the rotating stand for barrow height mixing.

SPECIFICATIONS� Size h x w x d: 890mm x 605mm x 1220mm� Noise level: 92dBA� Drum speed: 24rpm� Weight: 59.5kg

2000 4/3 MIXER c/w STAND – PETROL

SPECIFICATIONS� Size h x w x d: 890mm x 605mm x 1220mm� Noise level: 84dBA� Drum speed: 24rpm� Weight: 57kg

2001 4/3 MIXER c/w STAND110V/240V – ELECTRIC

Heavy-duty site mixer, 110 litre capacity andeasy to manoeuvre.

SPECIFICATIONS� Size h x w x d: 1467mm x 900mm x 1790mm� Drum speed: 19rpm� Noise level: 99dBA� Weight: 367kg

2005 5/31/2 SITE MIXER – DIESEL

CONC

RETE

& C

UTTI

NG EQ

UIPM

ENT

12


Exc. £72.00 £28.80 £86.40 £144.00Inc. £84.60 £33.84 £101.52 £169.20


Exc. £27.50 £11.00 £33.00 £55.00Inc. £32.31 £12.93 £38.78 £64.63


Exc. £13.00 £5.20 £15.60 £26.00Inc. £15.28 £6.11 £18.33 £30.55


Exc. £30.00 £12.00 £36.00 £60.00Inc. £35.25 £14.10 £42.30 £70.50


CONCRETE & CUTTING EQUIPMENT

VIBRATING POKERS

Various sizes available.

SPECIFICATIONS� Noise level: 85dBA� Vibration level: 5.5m/s2

2015 EXTRA POKER SHAFTS

High frequency internal vibrator. Use forconcrete compaction of foundations, walls,columns, and wherever high frequency concretevibration is required.

SPECIFICATIONS� Head length: 400mm� Frequency: 200Hz� Vibration level: 4m/s2

� Weight: 19.8kg� Vibrations: 12,000 per minute

2016HIGH FREQUENCY MOTORIN HEAD POKER110V – 5m

2017HIGH FREQUENCY MOTORIN HEAD POKER110V – 8m

Petrol powered reliable high frequency concrete vibrator, complete with 5m hose and poker head. Poker head sizes available: 25mm, 35mm,45mm, 55mm and 68mm.

SPECIFICATIONS� Power: 4hp/3kW� Frequency: 187Hz� Noise level: 97dBA� Vibration level: n/a� Length: 5m� Weight: 24kg

2010 VIBRATING POKER UNIT– PETROL

2014 VIBRATING POKER UNIT ELECTRIC 110V/240V c/w 3m SHAFT

12kg lightweight hand-held poker tool, with 3m hose for small concretingapplications. Poker head sizes available: 25mm, 38mm, 48mm and 58mm.

SPECIFICATIONS� Power: 110V/240V� Frequency: 187Hz� Noise level: 85dBA� Vibration level: 1.45m/s2

� Length: 3m� Weight: 12-14kg

CONC

RETE

& C

UTTI

NG EQ

UIPM

ENT

14


Exc. £107.50 £43.00 £129.00 £215.00Inc. £126.31 £50.53 £151.58 £252.63


Exc. £48.50 £19.40 £58.20 £97.00Inc. £56.99 £22.80 £68.39 £113.98


Exc. £48.50 £19.40 £58.20 £97.00Inc. £56.99 £22.80 £68.39 £113.98


Exc. £60.00 £24.00 £72.00 £120.00Inc. £70.50 £28.20 £84.60 £141.00


Exc. £43.00 £17.20 £51.60 £86.00Inc. £50.53 £20.21 £60.63 £101.05


Exc. £71.00 £28.40 £85.20 £142.00Inc. £83.43 £33.37 £100.11 £166.85

VIBRATING SCREEDS

Free screed concrete slabs with or withoutformwork with this lightweight portable power float.

SPECIFICATIONS� Two-stroke petrol engine� Compaction depth: 75mm� Noise level: 84dBA� Vibration level: 3.8m/s2

� Weight: 14.6kg

2024 EASY SCREED UNIT 2025 VIBRATING SCREED UNIT

For floor preparation and refurbishment worki.e. line removal, concrete level reduction,paint removal.

SPECIFICATIONS� Size h x w x l: 914mm x 660mm x 1016mm� Drum speed: 360rpm� Noise level: 95dBA� Vibration level: 2.92m/s2

� Weight: 112kg

2045 FLOOR GRINDER 110V – ELECTRIC

Floor preparation planer. Multi-purposeapplications – floor refurbishment, paintremoval, concrete grooving, texturing,cleaning, etc.

SPECIFICATIONS� Size h x w x l: 1000mm x 450mm x 1100mm� Drum speed: 2200rpm� Noise level: 98dBA� Vibration level: petrol: 7.68m/s2, electric: 7.58m/s2

� Weight: petrol: 70kg, electric: 80kg

2070 FLOOR PLANE/ROOF DE-CHIPPER – PETROL

2075 ELECTRIC FLOOR PLANE/ROOF DE-CHIPPER

Vibrating twin beam screed for simple concretelevelling. Strikes, vibrates and levels concretebays up to 150mm deep. Easy to use, simpleto assemble.

SPECIFICATIONS� Petrol driven� Compaction depth: 150mm� Noise level: 96dBA� Vibration level: 5.34m/s2

� Weight: 49kg

Strikes off and finishes concrete slabs easily.Easy to set up, simple operation and highlymanoeuvrable for difficult applications. Requires separate power supply, either air or 30 litre hydraulic power pack.

SPECIFICATIONS� Weight: 29kg

2027 ROLLER STRIKER SCREED UNIT

Different beam lengthsavailable up to 6m

DON’T FORGET DIAMOND BLADES

5.2m beam and 3.25m-5.2mextendable beams available

FLOOR PREPARATION


Exc. £26.00 £10.40 £31.20 £56.00Inc. £30.55 £12.22 £36.66 £65.80


Exc. £10.00 £4.00 £12.00 £20.00Inc. £11.75 £4.70 £14.10 £23.50


Exc. £24.00 £9.60 £28.80 £48.00Inc. £28.20 £11.28 £33.84 £56.40


Exc. £24.00 £9.60 £28.80 £48.00Inc. £28.20 £11.28 £33.84 £56.40


Exc. £35.00 £14.00 £42.00 £70.00Inc. £41.13 £16.45 £49.35 £82.25



Cuts channel up to 20mm depth.

SPECIFICATIONS� Power: 900W� No load speed: 9300rpm� Noise level: 90/110dBA� Vibration level: 4m/s2

� Weight: 2.8kg

2325 DIAMOND WALL CHASER – 900W

Professional disc cutter with electronic soft start,spindle lock, dust collection port and dual size20/22mm disc arbor. 305mm blade allows cuts up to 100mm.

SPECIFICATIONS� Power input: 2400W, voltage: 110V� No load speed: 5000rpm� Noise level: 93dBA� Vibration level: 7.5m/s2

� Weight: 11.5kg

2320 ELECTRIC DISC CUTTER – 300mm (12”)

Electronic speed control. Happy start. Anti-vibration dampened. Standard equipment:dust suppression kit, tool kit.

SPECIFICATIONS� Engine capacity: 64cc� Two-stroke petrol engine� Electronic ignition� Power: 4.2hp (DIN)� Max. wheel speed: 5100rpm� Blade size: 300mm (12”)� Arbor: 20mm� Max. cutting: 100mm� Fuel tank: 1.1ltr� Weight: 9.7kg� Vibration level:

Tubular handle: 6m/s2 idle, 5m/s2 max.Rear handle: 8m/s2 idle, 6m/s2 max.

� Noise power: 109dBA� Noise pressure: 97dBA

2305 PETROL STONE SAW – 300mm (12”)

2310 FLOOR SAW TROLLEY TO SUIT 2305

CUTTING & CHASING

DON’T FORGET DIAMOND BLADES

Slitting tool for installing electric cables andconduit in concrete and masonry. Wider anddeeper cutting for added versatility. 150m/hrcutting capability for higher productivity.Virtually dust free operation for added operator comfort.

SPECIFICATIONS � Power input: 1700W� Speed: 7500rpm� Max. width cut: 46mm, max. depth cut: 40mm� Weight: 5.6kg� Vibration level: 3.5m/s2

� Sound power level: 100dBA� Sound pressure level: 97dBA

2328 WALLCHASING MACHINE – 110V

CONC

RETE

& C

UTTI

NG EQ

UIPM

ENT

16


Exc. £79.00 £31.60 £94.80 £158.00Inc. £92.83 £37.13 £111.39 £185.65


Exc. £22.00 £8.80 £26.40 £44.00Inc. £25.85 £10.34 £31.02 £51.70

BLOCK SPLITTERS

Cuts most composite and paving blocks, cam lever cutting action, max. cut 300mm (12”) x 115mm (4.5”).


2342 MANUAL BLOCK AND SLAB SPLITTER

Diamond core wet drilling rig for all masonry and concrete includingnatural stone materials. Slow start motor, transport wheels, three-speedmotor, quick release clapper plate mounting.

SPECIFICATIONS� Size h x w x l: 1070mm x 180mm x 250mm� Max. blade diameter: 200mm� Rot. speed of blade: three-speed 410/810/1301rpm� Power: 2.2kW, 115V� Weight: 33kg

2080 DIAMOND DRILLING RIG

DIAMOND DRILLING

EN 12348

WEAR CHARGES APPLY ON ALL DIAMOND CORE BITS

VAT 24 HRS ADDT 24 HRS WEEKEND WEEK WEAR CHARGE

Exc. £85.00 £34.00 £102.00 £170.00 £50.00 per 0.5mmInc. £99.88 £39.95 £119.85 £199.75 £58.75 per 0.5mm


Exc. £50.00 £20.00 £60.00 £100.00Inc. £58.75 £23.50 £70.50 £117.50


Exc. £48.00 £19.20 £57.60 £96.00Inc. £56.40 £22.56 £67.68 £112.80



SAWS

Low vibration, compact and economical machine designed to cut asphalt and concrete.

SPECIFICATIONS� Size h x w x l: 990mm x 512mm x 1160mm� Max. blade diameter: 400mm� Rot. speed of blade: 2850rpm� Power: 9.6kW� Weight: 99kg� Vibration: 1.2m/s2

� Sound pressure level: 88dBA

2100 400mm FLOOR SAW – PETROL

Robust powerful machine for all types of repair work to both concrete andasphalt surfaces. Can be fitted with a 450mm diamond blade cutting to adepth of 165mm. A 70 litre integral water tank permits wet cutting to take place almost anywhere.

SPECIFICATIONS � 13hp petrol engine� Max. blade: 450mm, max. depth of cut: 165mm� Size h x w x l: 925mm x 580mm x 1600mm� Transport length: 1088mm� Noise level: sound pressure 89dBA, sound power 105dBA� Vibration level: concrete 4.2m/s2, ashphalt 4.6m/s2

� Weight: 135kg

2110 450mm FLOOR SAW – PETROL

Concrete cutting petrol chainsaw with diamond chain and bar. Will cutthrough all construction materials such as reinforced concrete, naturalstone, brick and concrete block. Plunge-cuts and cuts perfect square corners with no over-cuts.

SPECIFICATIONS� Two-stroke 5.7hp (4.2kW) at 8,700rpm� Deep cuts up to 300mm� Size l x h x w: 450mm x 290mm x 250mm� Noise level: 100dBA at 1m – ISO 3744� Vibration level: 8m/s2 (front handle) – ISO 7505� Weight: 9.5kg

3133 MASONRY CHAINSAW

Two diamond blades spaced at 20mm apartcan be fitted for cutting channelling

and expansion joints EN 13862

EN 13862

SITE

EQUI

PMEN

T

18


Exc. £50.00 £20.00 £60.00 £100.00Inc. £58.75 £23.50 £70.50 £117.50

VAT 24 HRS ADDT 24 HRS WEEKEND WEEK WEAR CHARGE

Exc. £30.00 £12.00 £36.00 £60.00 £30.00 per mmInc. £35.25 £14.10 £42.30 £70.50 £35.25 per mm


Exc. £52.00 £20.80 £62.40 £104.00Inc. £61.10 £24.44 £73.32 £122.20

SAWS

500mm cutting length. 600mm when using additional support. Very rigidaluminium frame and foldable legs for easy transportation and handlingon site. Conveyor car has a non-slip top, which is lockable for transport.

SPECIFICATIONS � Power: 3.7kW� Max. blade diameter: 400mm, max. depth of cut: 150mm� Size h x w x l: 1585mm x 660mm x 1205mm� Transport length: 995mm� Noise level: 93/105dBA� Weight: 116kg

2160 400mm MASONRY SAW BENCH – PETROL

Compact portable masonry saw with adjustable, removable legs, tiltingtable and independent water pump. Used for cutting small and large tilesand slabs, bricks and blocks and small building materials.

SPECIFICATIONS� Size h x w x l: 1250mm x 600mm x 980mm� Max. blade diameter: 350mm� Rot. speed of blade: 2800rpm� Power: 2.2kW/115V� Weight: 67kg� Vibration: 1.5m/s2

� Sound pressure level: 80dBA

2170 350mm MASONRY SAW BENCH – ELECTRIC

Bench top electrical saw designed specifically for cutting block paviors.Repeatable cuts. No marking every block. Clean fast cut. No more dust inface when cutting.

SPECIFICATIONS� Size h x w x l: 400mm x 435mm x 650mm� Max. blade diameter: 300mm� Rot. speed of blade: 2800rpm� Power: 1.8kW/115V� Weight: 27.5kg� Sound pressure level: 83dBA

2195 MINI CLIPPER – BLOCK PAVIOR SAW

EN 12418

EN 12418

WEAR CHARGES APPLY ON ALL DIAMOND BLADES


Exc. £4.00 £0.80 £4.00 £4.00Inc. £4.70 £0.94 £4.70 £4.70


Exc. £10.00 £2.00 £10.00 £10.00Inc. £11.75 £2.35 £11.75 £11.75


Exc. £4.00 £0.80 £4.00 £4.00Inc. £4.70 £0.94 £4.70 £4.70


Exc. £4.00 £0.80 £4.00 £4.00Inc. £4.70 £0.94 £4.70 £4.70


Exc. £4.00 £0.80 £4.00 £4.00Inc. £4.70 £0.94 £4.70 £4.70


SITE EQUIPMENT

PROPS

Clawed end plates – maximum grip onto trench lining. Thread rolled struts– no cutting away of material, increased longevity of product. Rolled threads – no wear, no loss of strength.

SPECIFICATIONS� Closed length: 1.04m, extended length: 1.83m� Weight: 5kg

0170 SHORING PROP 0


SPECIFICATIONS� Closed length: 1.75m, extended length: 3.12m� Weight: 7.25kg � Supplied with captive inners

0171 SHORING PROP 1


SPECIFICATIONS� Closed length: 1.98m, extended length: 3.35m� Weight: 10.4kg� Supplied with captive inners

0172 SHORING PROP 2


SPECIFICATIONS� Closed length: 2.59m, extended length: 3.96m� Weight: 13.2kg� Supplied with captive inners

0173 SHORING PROP 3


BS4074 1982

For breaking out single or double skinned walls, supporting damagedor uneven brickwork, replacing wall ties, installing R.S.J. or concretelintels, etc.

SPECIFICATIONS� Max. load bearing capacity: 340kg (750lb) per unit� Max. safe working height: 3m from firm base� Max. distance between props: 900mm (3’)

0175 STRONG BOY SUPPORT ATTACHMENT


SITE

EQUI

PMEN

T

20


Exc. £6.00 £2.40 £7.20 £12.00Inc. £7.05 £2.82 £8.46 £14.10


Exc. £6.00 £2.40 £7.20 £12.00Inc. £7.05 £2.82 £8.46 £14.10


Exc. £6.00 £2.40 £7.20 £12.00Inc. £7.05 £2.82 £8.46 £14.10

Assembles as a flexible unit providing a versatile chute system, ideal forsituations where rigid systems are impractical. Made from one piece blowmoulded high density polyethylene, giving maximum strength withminimum weight – easy to assemble and dismantle.

SPECIFICATIONS � 510mm (20”) diameter at top, tapered to 460mm (16”) diameter at base� 1100mm long� Weight: 9kg� Fitted with brackets and chain� Secured to scaffolding using universal-fixing frame

0200 RED TAPERED RUBBISH CHUTE 1m SECTION

Moulded from polyethylene, enables tipping direct from roof level. Sits inside the top rubbish chute.

SPECIFICATIONS � 510mm (20”) top diameter� Weight: 10kg

0201 RED RUBBISH CHUTE – FUNNEL

Tailor made, extremely safe method of connecting chute system to scaffolding.

SPECIFICATIONS� 510mm (20”) top diameter� Weight: 10kg

0202 RUBBISH CHUTE – UNIVERSAL FIXING FRAME

RUBBISH CHUTES

SKIP HIREJewson offers a nationwide skip hire service. Available through allour branches, we can provide all types and sizes of skip from amini two-yard skip to a roll-on roll-off 40-yard skip. We also offera wait and load option and we cater for all types of waste materialincluding asbestos and other hazardous materials. This excellentservice takes all the hassle out of hiring skips. We take care ofeverything for you – we’ll arrange for all local authority permitsand ensure your skip is delivered where and when you need it.

For further details, please contact your local Jewson branch


Exc. £15.00 £6.00 £18.00 £30.00Inc. £17.63 £7.05 £21.15 £35.25


Exc. £2.00 £0.40 £2.00 £2.00Inc. £2.35 £0.47 £2.35 £2.35


Exc. £2.00 £0.40 £2.00 £2.00Inc. £2.35 £0.47 £2.35 £2.35


Exc. £3.00 £0.60 £3.00 £3.00Inc. £3.53 £0.71 £3.53 £3.53


Exc. £3.00 £0.60 £3.00 £3.00Inc. £3.53 £0.71 £3.53 £3.53


Exc. £3.00 £0.60 £3.00 £3.00Inc. £3.53 £0.71 £3.53 £3.53


Exc. £6.00 £1.20 £6.00 £6.00Inc. £7.05 £1.41 £7.05 £7.05


Exc. £4.00 £0.80 £4.00 £4.00Inc. £4.70 £0.94 £4.70 4.70

BS873: Part B 1985 CatA D2

21

SITE EQUIPMENT

SITE SAFETY

460mm (18”) two-piece moulded cone with Starlux sleeve.

7500 ROAD SAFETY CONE


Safety barrier system, featuring 8kg base which provides stability.Moulded posts can fit cats eye sockets, and reflective planks can befixed in a rigid vertical position or allowed to swing.

Used to convert a standard road cone into a barrier system to supportreflective planks.

7509 CHAPTER 8 1.25m PLANK


7510 CHAPTER 8 2m PLANK


7511 CHAPTER 8 BASE


7512 CHAPTER 8 POST c/w COLLARS


7502 SAFETY CONE CONVERTOR


Safe solution to filling building skips. Hold-fast clamp prevents movementin use, recessed wheel channel provides full control, rungless permanentgrip walkway prevents slippage. Wheel trap and pivot bar ensuresafe tipping.

SPECIFICATIONS� Size l x w: 3m x 600mm� Weight: 35kg

7508 SKIP RAMP

Men at work temporary road sign.

7506 ROAD SIGN


SKIP RAMP


SITE

EQUI

PMEN

T

22


Exc. £17.00 £6.80 £20.40 £34.00Inc. £19.98 £7.99 £23.97 £39.95

DAMP PROOFING

Storage safe for tools and equipment. Fork lifting points for easy loading.

SPECIFICATIONS� 2.5mm and 3mm sheet steel construction� CNC formed and fully welded, high-security concealed split piano hinge� 2 x 5 lever locks� Weight: 89kg

7515 SITE SECURITY CHEST– 1220mm x 610mm x 610mm (4’ x 2’ x 2’)


Exc. £4.00 £1.60 £4.80 £8.00Inc. £4.70 £1.88 £5.64 £9.40


Exc. £41.00 £16.40 £49.20 £82.00Inc. £48.18 £19.27 £57.81 £96.35

SITE SECURITY

Hydro twin piston pump head. Suction andreturn hose fitted with strainer. Power take offpoint for drill or breaker. Four-way manifoldcomplete with 10” rods.

SPECIFICATIONS� 110V� 250W motor� Weight: 23kg

5600 DAMP PROOF INJECTION MACHINE

5605 WOODWORM SPRAYATTACHMENT FOR 5600

DON’T FORGET INJECTION FLUID


Exc. £14.00 £5.60 £16.80 £28.00Inc. £16.45 £6.58 £19.74 £32.90

Centre cut jaws have short nose for trouble free cutting of pre-stressedconcrete reinforced rods, mesh and wire, high tensile steel rods, bolts andcase hardened chain, cold drawn alloy steel and tempered sprung wire.

SPECIFICATIONS � Overall length: 915mm (36”)� Max. cutting capacity: 11.1mm (7/16”)

7065 915mm (36”) BOLT CROPPERS


SITE EQUIPMENT

SITE ACCOMMODATION & STORAGE

SPECIFICATIONS � Size l x w x h: 3.03m (10’) x 2.42m (8’) x 2.42m (8’)� Lockable double doors� Supplied with lock and key

3m (10’) CONTAINER

SPECIFICATIONS� Size l x w x h: 6.06m (20’) x 2.42m (8’) x 2.42m (8’)� Supplied with heating and lighting� Supplied with furniture (tables and benches)

6m (20’) MESS UNIT

SPECIFICATIONS� Size l x w x h: 6.06m (20’) x 2.42m (8’) x 2.42m (8’)� Supplied with heating and lighting� Supplied with furniture (desks and chairs)

6m (20’) OFFICE UNIT

SPECIFICATIONS � Size l x w x h: 6.06m (20’) x 2.42m (8’) x 2.42m (8’)� Lockable double doors� Supplied with lock and key

6m (20’) CONTAINER


0800 539766

SITE

EQUI

PMEN

T

24

FENCING & HOARDING

SPECIFICATIONS � Panel size l x h: 3472mm x 2000mm� Vertical tubes: 38.1mm diameter, 1.2mm thickness� Horizontal tubes: 25.3mm diameter, 1.2mm thickness� Vertical wires: 3mm� Horizontal wires: 4mm� Wire spacing: horizontal: 34.5mm, vertical: 253mm

STANDARD-DUTY ANTI-CLIMB PANEL

SPECIFICATIONS � Panel size l x h: 3472mm x 2000mm� Vertical tubes: 38.1mm diameter, 1.2mm thickness� Horizontal tubes: 38.1mm diameter, 1.2mm thickness� Vertical wires: 3mm� Horizontal wires: 4mm� Wire spacing: horizontal: 34.5mm, vertical: 253mm

HEAVY-DUTY ANTI-CLIMB PANEL

Minimum Two Week Hire


0800 539766



SITE EQUIPMENT


FENCING & HOARDING

SPECIFICATIONS � Panel size l x h: 3450mm x 2000mm� Vertical tubes: 38.1mm diameter, 1.2mm thickness� Horizontal tubes: 38.1mm diameter,

1.2mm thickness� Vertical wires: 3mm� Horizontal wires: 4mm� Wire spacing: horizontal: 38mm, vertical: 253mm� Weld reinforcements: 4 ‘RFX’ plates welded in

each corner

RFX ANTI-CLIMB PANEL

SPECIFICATIONS � Panel size l x h: 2200mm x 2000mm� Sheeting: 7mm thick box profile, galvanised as

standard but colours upon request� Channels: 60mm x 40mm, 2mm thick� Vertical tubes: 38.1mm diameter, 2mm thickness

READYHOARD




0800 539766

SITE

EQUI

PMEN

T

26

TOILET HIRE

SPECIFICATIONS � Height: 2.32m� Width: 1.12m� Depth: 1.25m� Tank volume: 227ltr� Weight (empty): 98kg

SITE TOILETS



0800 539766


Exc. £70.00 £28.00 £84.00 £140.00Inc. £82.25 £32.90 £98.70 £164.50


Exc. £5.00 £2.00 £6.00 £10.00Inc. £5.88 £2.35 £7.05 £11.75


Exc. £60.00 £24.00 £72.00 £120.00Inc. £70.50 £28.20 £84.60 £141.00


LIFTING & MOVING EQUIPM

ENTLIFTING EQUIPMENT

Versatile hoist with adjustable ‘A’ frame, extending from745mm-1120mm with remote control and scaffold clamp.

SPECIFICATIONS� Max. lifting capacity: 150kg� Cable length: 40m� Average lifting speed: 26m/min� Noise level: 57dBA� Weight: 40kg

0210 SWIVEL ARM HOIST

SPECIFICATIONS� Max. lifting capacity: 250kg� Weight of chains: 3.5kg

0212 WHEELBARROW CHAIN SLING

Portable materials lift for construction applications.

SPECIFICATIONS� Max. load: 295kg (360mm load centre)� Working height: 0.15m-5.64m� Stowed size h x w x l: 2180mm x 860mm x 800mm� Weight: 139kg

6020 SUPERLIFT™


Exc. £70.00 £28.00 £84.00 £140.00Inc. £82.25 £32.90 £98.70 £164.50

Loads tiles, fittings, felt, bricks, blocks, mortars etc. Quick to erect and easily repositioned by two men, even on difficult sites.Continuous action. Powered reverse for stripping salvage.

SPECIFICATIONS� Max. payload: 80kg� Noise level: 78dBA� Weight: 76kg

0230 CONVEYOR TILE HOIST – PETROL8m

0240 CONVEYOR TILE HOIST – ELECTRIC8m


Exc. £67.50 £27.00 £81.00 £135.00Inc. £79.32 £31.73 £95.18 £158.63

LIFTI

NG &

MOV

ING

EQUI

PMEN

T

28


Exc. £26.00 £10.40 £31.20 £52.00Inc. £30.55 £12.22 £36.66 £61.10


Exc. £9.00 £3.60 £10.80 £18.00Inc. £10.58 £4.23 £12.69 £21.15


Exc. £23.00 £9.20 £27.60 £46.00Inc. £27.03 £10.81 £32.43 £54.05


Exc. £9.00 £3.60 £10.80 £18.00Inc. £10.58 £4.23 £12.69 £21.15

LIFTING EQUIPMENT

90 litre epoxy coated builder’s wheelbarrow with four ply tyre.

7160 WHEELBARROW

Portable tradesmen’s universal platform. Ideal for lifting plasterboardinto position.

SPECIFICATIONS� Max. safe working load: 465kg, max. internal width: 1500mm� Upper jacks max. safe working load: 90kg, max. height: 3100mm� Lower platform max. safe working load: 375kg, max. height: 750mm

6025 PLASTERBOARD JACK LIFT

Heavy-duty sack truck for ease of handling.

SPECIFICATIONS� Capacity: 250kg

7150 SACK TRUCK

SPECIFICATIONS� Max. load: 2200kg� Weight: 70kg� Pallet size w x l: 525mm x 1150mm

7170 PALLET TRUCK

EN 292 Parts 1&2 1991EN 294 1992


Exc. £35.00 £14.00 £42.00 £70.00Inc. £41.13 £16.45 £49.35 £82.25

SPECIFICATIONS� Max. load: 100kg� Lifts to height of 800mm

7175 HIGH LIFT PALLET TRUCKNEW


Exc. £95.00 £38.00 £114.00 £190.00Inc. £111.63 £44.65 £133.95 £223.25


Exc. £95.00 £38.00 £114.00 £190.00Inc. £111.63 £44.65 £133.95 £223.25


Exc. £185.00 £74.00 £222.00 £370.00Inc. £217.38 £86.95 £260.85 £434.75


Exc. £185.00 £74.00 £222.00 £370.00Inc. £217.38 £86.95 £260.85 £434.75


EARTH MOVING

EXCAVATORS

LOADERS

Only 700mm wide (2’4”) and able to track through a standard doorway.Extending undercarriage giving excellent stability and lift capacity.Designed for comfort and ease of operation.

SPECIFICATIONS� Overall height: 2295mm (7’6”)� Overall length: 2957mm (9’7”)� Dozer width (retracted): 700mm (2’4”)� Dozer width (extended): 1000mm (3’3”)� Vibration levels: hand/arm – less than 2.5m/s2, whole body – less than 1.3m/s2

� Noise level: 96dBA

6703 MINI EXCAVATOR – JCB MICRO

Compact and powerful diesel powered tracked mini excavator, selection ofbuckets available to suit the application.

SPECIFICATIONS� Width: 980mm� Max. dig depth: 2015mm� Max. reach: 3510mm� Noise level: 94dBA� Weight: 1400kg

6710 MINI EXCAVATOR

Designed to take all back-breaking work andproblems out of moving soil and rubbish,loading skips, hoppers, trucks, lorries andconveying material off the road. Suitable to be towed behind a road vehicle.

SPECIFICATIONS � Size h x w x l: 1332mm x 960mm x 2809mm� Weight: 660kg� Lifts and loads up to 500kg� Max. lift height: 1.9m� Load ejection height of 1.8m

6730 WHEELED SKIP LOADER (ROUGHNECK)

Diesel powered tracked skip loader. Loads skipsup to 1.3m high.

SPECIFICATIONS� Max. load: 650kg� Width: 750mm� Weight: 800kg

6725 TRACKED SKIP LOADER

EART

H M

OVIN

G

30


Exc. £40.00 £16.00 £48.00 £80.00Inc. £47.00 £18.80 £56.40 £94.00


Exc. £150.00 £60.00 £180.00 £300.00Inc. £176.25 £70.50 £211.50 £352.50

Four-wheel drive articulated dumper truck designed for all types of terrain.

SPECIFICATIONS� 11.8hp diesel engine� Max. load: 750kg� Bucket volume: 0.47m3

� Operational weight (no load): 960kg� Overall width: 979mm� Noise level: 104dBA

6735 MINI DUMPER HIGH TIP – 750kg CAPACITY c/w ROLL BAR

Rugged construction. ‘A’ frame drawbar comes with bucket rest. Reinforced chassis. Mesh ramp tail comes with integral ‘knuckle’ support.

SPECIFICATIONS � Gross vehicle weight: 2600kg� Carrying capacity: 2052kg� Bed size (internal) l x w: 2050mm x 1245mm� Side height (internal): 254mm� Ramp size w x h: 1245mm x 1270mm

6715 PLANT TRAILER

DUMPER TRUCK

TRAILER


Exc. £70.00 £70.00 £105.00 £210.00Inc. £82.25 £82.25 £123.28 £246.75

Available with an array of accessories for post hole boring,trenching and digging.

SPECIFICATIONS� 16hp petrol engine

6760 KANGA KIDNEW


Exc. £28.00 £11.20 £33.60 £56.00Inc. £32.90 £13.16 £39.48 £65.80


Exc. £27.50 £11.00 £33.00 £55.00Inc. £32.31 £12.93 £38.77 £64.62


Exc. £28.00 £11.20 £33.60 £56.00Inc. £32.90 £13.16 £39.48 £65.80


COMPACTION

PLATE COMPACTORS

Lightweight and portable machine. Suitable for compacting asphaltpatching, inaccessible areas, paving and landscaping applications.

SPECIFICATIONS� Four-stroke 4hp petrol engine� Base plate size l x w: 520mm x 350mm� Use on grades up to 30%� Vibration: 5800 per minute� Noise level: 93dBA� Vibration level: 4.62m/s2

� Weight: 62kg

2495 PLATE COMPACTOR – LIGHTWEIGHT350mm (14”)

General purpose plate compactor with 450mm wide base plate. Hauc compliant option available.

SPECIFICATIONS � Petrol engine� Base plate size l x w: 500mm x 450mm� Noise level: 101dBA� Vibration level: 6.05m/s2

� Weight: 83kg� Paving pad available

2502 PLATE COMPACTOR450mm (18”)

General purpose plate compactor with 400mm wide base plate.

SPECIFICATIONS � Four-stroke 5.5hp petrol engine� Base plate size l x w: 590mm x 400mm� Use on grades up to 30%� Vibration: 5800 per minute� Compaction depth: 300mm� Noise level: 95dBA� Vibration level: 4.62m/s2

� Weight: 74kg

2500 PLATE COMPACTOR 400mm (16”)

COM

PACT

ION

32


Exc. £15.00 £6.00 £18.00 £30.00Inc. £17.63 £7.05 £21.15 £35.25


Exc. £35.00 £14.00 £42.00 £70.00Inc. £41.13 £16.45 £49.35 £82.25


Exc. £60.00 £24.00 £72.00 £120.00Inc. £70.50 £28.20 £84.60 £141.00


Exc. £9.50 £3.80 £11.40 £19.00Inc. £11.16 £4.47 £13.40 £22.33


Exc. £56.00 £22.40 £67.20 £112.00Inc. £65.80 £26.32 £78.96 £131.60


Exc. £28.00 £11.20 £33.60 £56.00Inc. £32.90 £13.16 £39.48 £65.80

PLATE COMPACTORS

VIBRATING COMPACTORS

All purpose plate compactor with 500mm widebase plate.

SPECIFICATIONS � Four-stroke 5.5hp petrol engine� Base plate size l x w: 590mm x 500mm� Use on grades up to 30%� Compaction depth: 300mm� Noise level: 96dBA� Vibration level: 4.74m/s2

� Weight: 85kg

2504 PLATE COMPACTOR 500mm (20”)

Single vibrating drum roller for high compaction applications.

SPECIFICATIONS� Petrol engine� Drum width: 560mm� Max. gradeability: 25%� Vibration level: 3.9m/s2

� Sound pressure level: 89.7dBA� Sound capacity level: 97.7dBA� Weight: 151kg

2600 SINGLE DRUM VIBRATING ROLLER

Vibratory rammer for confined area compaction.

SPECIFICATIONS� Two-stroke 3.1hp petrol engine� Shoe size l x w: 330mm x 250mm� 800bpm (blows per minute)� Compaction depth: 450mm� Noise level: 91dBA� Vibration level: 4.9m/s2

� Weight: 57kg

2580 230mm (9”) TAMPER RAMMER2601 ROAD TRAILER TO

SUIT 2600

For use when compacting interlocking blocks.

SPECIFICATIONS� Noise level: 95dBA� Vibration level: 7.7m/s2

2510 BLOCK PAVING PAD TO SUIT 2500/2504 2530

REVERSIBLE PLATECOMPACTOR 400mm (16”)

Plate compactor with variable forward andreverse motion with a 400mm wide base platesuitable for a wide variety of uses.SPECIFICATIONS� Four-stroke 5.5hp petrol engine� Base plate size l x w: 700mm x 400mm� Use on grades up to 30%� Noise level: 95dBA� Vibration level: 7.7m/s2

� Weight: 140kg


Exc. £16.00 £6.40 £19.20 £32.00Inc. £18.80 £7.52 £22.56 £37.60


Exc. £10.00 £4.00 £12.00 £20.00Inc. £11.75 £4.70 £14.10 £23.50


Exc. £21.00 £8.40 £25.20 £42.00Inc. £24.68 £9.87 £29.61 £49.35


Exc. £16.00 £6.40 £19.20 £32.00Inc. £18.80 £7.52 £22.56 £37.60

33

POWER TOOLS

Powerful cordless drill/driver with two-speed gearbox and 13mm (1/2”)keyless chuck.

SPECIFICATIONS� Drilling capacities: steel 13mm, wood 32mm� No load speed 1st/2nd gear: 0-400rpm/0-1400rpm� Noise level: 70/85dBA� Vibration level: <2.5m/s2

� Weight: 2.2kg

3040 14.4V COMBINATION CORDLESSDRILL/DRIVER

24 volt cordless rotary hammer drill with keyless SDS Plus chuck,variable speed trigger and reverse setting.

SPECIFICATIONS� Drilling capacities: steel 13mm, wood 20mm, concrete 4-20mm� No load speed: 0-1000rpm� Noise level: 86/99dBA� Vibration level: 10m/s2

� Weight: 4.2kg

3045 24V CORDLESS ROTARY HAMMER DRILL

SPECIFICATIONS � 13mm metal keyless chuck� 13mm max. steel� 40mm max. wood� 40mm max. masonry� 0-58,000bpm max.� Power: 720W� Weight: 2.3kg� Vibration level: 6m/s2

� Noise power: 110dBA� Noise pressure: 97dBA� Torque limiter� Variable speed dial switch� Forward and reverse

3050 13mm KEYLESS PERCUSSION DRILL (720W)

SPECIFICATIONS � 13mm chuck� 13mm max. steel� 30mm max. wood� 20mm max. masonry� 152mm max. dry diamond core� 0-22,500bpm� Power: 850W� Weight: 3.5kg� Vibration level: 6.94m/s2

� Noise power: 109dBA� Noise pressure: 104dBA� Torque limiter� Forward and reverse

3060 ROTARY PERCUSSION & DIAMOND CORE DRILL (850W)

DRILLING

DON’T FORGET DIAMOND CORE BITSPLEASE SEE PAGES 70-73 FOR YOUR NEAREST TOOL HIRE BRANCH


Exc. £48.00 £19.20 £57.60 £96.00Inc. £56.40 £22.56 £67.68 £112.80

POW

ER TO

OLS

34

Small lightweight electromagnetic drill stand. Ideal for on-sitedrilling of holes.

SPECIFICATIONS� 110V or 240V� Holes up to 32mm diameter through 50mm steel� Speed: 550rpm � Noise level: 85.1dBA� Vibration level: <7m/s2 � Weight: 11kg

3500 MAGNETIC MILLING MACHINE


Exc. £18.00 £7.20 £21.60 £36.00Inc. £21.15 £8.46 £25.38 £42.30


Exc. £15.00 £6.00 £18.00 £30.00Inc. £17.63 £7.05 £21.15 £35.25


Exc. £40.00 £16.00 £48.00 £80.00Inc. £47.00 £18.80 £56.40 £94.00

Professional diamond drilling system for drilling through holes in masonry,anchor holes in reinforced concrete and removing test cores.

SPECIFICATIONS� Power: 1600W� Drilling capacities:16mm-112mm (occasional 162mm) dry (masonry)

8mm-42mm wet hand held (reinforced concrete)8mm-82mm wet rig mounted (reinforced concrete)

� Noise level: sound pressure 89dBA, sound power 102dBA� Vibration level: <2.5m/s2 � Weight: 6.2kg

3062 HAND HELD DIAMOND DRILL

3kg rotary SDS plus hammer for drilling or breaking.

SPECIFICATIONS� Drilling capacities:

concrete 28mm, masonry (core bit) 80mm, wood 30mm, steel 13mm� Power output: 400W � No load speed: 0-800rpm,� Impact rate/energy: 0-4000/min 3.3J � Noise level: 87/100dBA� Vibration level: 13m/s2 � Weight: 3.3kg

3070 ROTARY HAMMER DRILL

SPECIFICATIONS� Three mode action: rotary, rotary hammer and hammer only� 30mm max. in concrete � Variable bpm 1650-3300� 90mm max. core diameter � 360-720rpm� Power: 850W � 5.3J impact energy� Vibration level: 9m/s2 � Noise power: 102dBA� Noise pressure: 89dBA

3080 4.6kg SDS+ (3 FUNCTION) ROTARY HAMMER (850W)

DRILLING

DON’T FORGET WE SELL A COMPLETE RANGE OF DIAMOND CORE DRILL BITS


Exc. £17.00 £6.80 £20.40 £34.00Inc. £19.98 £7.99 £23.97 £39.95

SPECIFICATIONS� 800W motor� Low vibration� For anchor holes and through holes in concrete and masonry from 5-28mm diameter� Stands up to the demanding conditions of daily jobsite use

3075 MEDIUM DUTY SDS ROTARY DRILLNEW


Exc. £19.00 £7.60 £22.80 £38.00Inc. £22.33 £8.93 £26.79 £44.65


POWER TOOLS

DRILLING MIXER

DRILLS & ATTACHMENTS

Variable speed angle drill with reverse action.

SPECIFICATIONS� Drilling capacities: steel 10mm, wood 22mm, aluminium 12mm� Power: 400W� No load speed: 750/1100rpm� Chuck capacity: 10mm (3/8”) � Noise level: 80dBA� Vibration level: <2.5m/s2

� Weight: 1.6kg

3100 ANGLE HEAD DRILL


2741 40mm-75mm CORE DRILL ASSEMBLY Exc. £6.00 £2.40 £7.20 £12.00

Inc. £7.05 £2.82 £8.46 £14.10

2742 76mm-125mm CORE DRILL ASSEMBLY Exc. £6.50 £2.60 £7.80 £13.00

Inc. £7.64 £3.06 £9.17 £15.28

2751 10mm-25mm SOLID DRILL BIT SDS & TAPER DRILL Exc. £3.00 £1.20 £3.60 £6.00

Inc. £3.53 £1.41 £4.23 £7.05

2752 26mm-50mm SOLID DRILL BIT SDS & TAPER DRILL Exc. £6.00 £2.20 £7.20 £12.00

Inc. £7.05 £2.59 £8.46 £14.10

2755 DRILL EXTENSION BAR Exc. £1.50 £0.60 £1.80 £4.00

Inc. £1.76 £0.71 £2.12 £4.70

2760 MAGNETIC MILLING MACHINE DRILL BITS – SMALL Exc. £6.50 £2.60 £7.80 £13.00

Inc. £7.64 £3.06 £9.17 £15.28

2765 MAGNETIC MILLING MACHINE DRILL BITS – LARGE Exc. £9.00 £1.20 £10.80 £18.00

Inc. £10.58 £1.41 £12.69 £21.15

DON’T FORGET WE SELL A COMPLETE RANGE OF MASONRY AND METAL DRILL BITS


Exc. £23.00 £9.20 £27.60 £46.00Inc. £27.03 £10.81 £32.43 £54.05

Two-speed paint stirrer/mixer.

SPECIFICATIONS� Power: 1150W� No load speed: 0-280, 0-640rpm� Noise level: 87/100dBA� Vibration level: <2.5m/s2

� Weight: 4.2kg

3065 STIRRER/MIXER DRILLc/w PADDLE

POW

ER TO

OLS

36


Exc. £18.00 £7.20 £21.60 £36.00Inc. £21.15 £8.46 £25.38 £42.30


Exc. £20.00 £8.00 £24.00 £40.00Inc. £23.50 £9.40 £28.20 £47.00


Exc. £16.00 £6.40 £19.20 £32.00Inc. £18.80 £7.52 £22.56 £37.60


Exc. £18.00 £7.20 £21.60 £36.00Inc. £21.15 £8.46 £25.38 £42.30

WOODWORKING

SPECIFICATIONS� 82mm planing width� 3.5mm max. per pass� 23mm max. rebate� Power: 850W� Lock off switch� Weight: 2.5kg� Vibration level: 2.5m/s2

� Noise power: 103dBA� Noise pressure: 90dBA� TCT reversible mini carbide blades

3120 3.5mm HEAVY-DUTY PLANER (850W)

Fits all popular routers. Cuts worktops 500mm-650mm. Double ended,cuts right angle joints. Use with 12.7mm (1/2”) router.

SPECIFICATIONS� Overall size l x w: 1000mm x 400mm

3136 WORKTOP JIG

Heavy-duty router. Suitable for site work and kitchen work tops.

SPECIFICATIONS� Power input: 2000W� Constant speed control� 1/2” and 1/4” collets� No load speed: 8,000-21,000rpm� Soft start� Spindle lock� Depth of plunge: 65mm� Noise level: 89/102dBA� Vibration level: 4m/s2

3135 12.7mm (1/2”) ROUTER

SPECIFICATIONS� Power: 670W� No load speed: 11000rpm� Saw blade diameter: 105mm� Cutting capacity at 90°: 22mm� Noise level: 89/102dBA� Vibration level: 4m/s2

� Weight: 2.9kg

3139 BISCUIT JOINTER

COMPLETE RANGE OF ROUTER BITS AVAILABLE


Exc. £17.00 £6.80 £20.40 £34.00Inc. £19.98 £7.99 £23.97 £39.95


Exc. £14.00 £5.60 £16.80 £28.00Inc. £16.45 £6.58 £19.74 £32.90


Exc. £13.00 £5.20 £15.60 £26.00Inc. £15.28 £6.11 £18.33 £30.55


Exc. £10.00 £4.00 £12.00 £20.00Inc. £11.75 £4.70 £14.10 £23.50

37

POWER TOOLS

GRINDERS

SAWS

Suitable for use with abrasive and diamond discs.

SPECIFICATIONS� Power: 750W� Wheel size: 115mm� No load speed: 11000rpm� Noise level: 88/101dBA� Vibration level: 2.5m/s2

� Weight: 1.45kg� Spindle thread: 14mm

3000 MINI GRINDER 115mm (4.5”)

SPECIFICATIONS� 135mm wood� 10mm steel� 20mm aluminium� 26mm stroke length� Power: 720W� Variable speed: 800-2800spm� Weight: 2.3kg� Vibration level: 8m/s2

� Noise power: 85dBA� Noise pressure: 83dBA� Keyless blade change� Orbital actions� Soft start electronic speed control

3150 135mm KEYLESS JIGSAW (720W)

Heavy-duty cordless jigsaw, featuring keyless shoe with 45° bevel capacity.

SPECIFICATIONS� Power: 330W� Stroke rate: 0-2000spm (strokes per minute)� Length of stroke: 26mm� Noise level: 88.7dBA� Vibration level: 9.3m/s2

� Max. cut: wood 65mm, metal 10mm� Weight: 3.3kg

3151 18V CORDLESS JIGSAW

Suitable for use with abrasive and diamond discs.

SPECIFICATIONS� Power: 2000W� No load speed: 6500rpm� Noise level: 94/107dBA� Vibration level: 5.5m/s2

� Weight: 4.2kg

3010 ANGLE GRINDER/CUTTER 230mm (9”)

DON’T FORGET WE SELL A COMPLETE RANGE OF DIAMOND BLADES,ABRASIVE WHEELS AND JIGSAW BLADES


POW

ER TO

OLS

38


Exc. £40.00 £16.00 £48.00 £80.00Inc. £47.00 £18.80 £56.40 £94.00


Exc. £24.00 £9.60 £28.80 £48.00Inc. £28.20 £11.28 £33.84 £56.40


Exc. £46.00 £18.40 £55.20 £92.00Inc. £54.05 £21.62 £64.86 £108.10


Exc. £35.00 £14.00 £42.00 £70.00Inc. £41.13 £16.45 £49.35 £82.25

SAWS

SPECIFICATIONS� Wheel size: 355mm� Bore size: 25.4mm� Max. cutting capacity 115mm (section)� Three section guard for safety� Adjustable material clamp� Lock-off button for safety� Motor: 1650W� 3800rpm� Vibration level: 2.5m/s2


3155 355mm (14”) CHOP/CUT-OFF SAW

Compact and lightweight professional cross cut mitre saw.

SPECIFICATIONS� Power: 1200W� Blade diameter: 216mm� No load speed: 6700rpm� Noise level: 89.7dBA� Vibration level: 2.2m/s2

� Weight: 15.5kg

3161 CROSS CUT/COMPOUND MITRE SAW

Single speed tandem saw, cuts all timber, Celcon and Thermalitetype blocks.

SPECIFICATIONS� 110V only� Power: 1400W� No load stroke rate: 2500spm� Length of stroke: 50mm� Noise level: 91/104dBA� Vibration level: 4m/s2

� Weight: 5.2kg

3165 TYRANNOSAW SINGLE SPEED TANDEM SAW

Heavy-duty dual mode switch for saw bench and mitre applications, allowsthe unit to be used continuously in repetitive applications. Rapid tool freetransformation from a saw bench to a mitre saw. Provides flexibility in arange of site and workshop applications.

SPECIFICATIONS� Power input: 2000W� Blade diameter: 250mm� Max. cutting capacity (snip-off position 45º right mitre):

106mm x 70mm� Max. cutting capacity (snip-off position 45º bevel): 155mm x 50mm� Weight: 32kg� Noise level: 83dBA by ear, 96dBA around the room

3160 MITRE SAW/FLIPOVER SAW


POWER TOOLS


Exc. £40.00 £16.00 £48.00 £85.00Inc. £47.00 £18.80 £56.40 £99.88

No mains power required. 24 volt high torque. Rotatable sawing head androtary plate adjustable up to 48 degrees.

SPECIFICATIONS � Voltage: 24V� No load speed: 3600rpm� Saw blade diameter: 255mm� Bore size: 30mm� Weight: 14.4kg� Noise level: 93/106dBA� Vibration level: <2.5m/s2

3162 CORDLESS MITRE SAW


Exc. £17.00 £6.80 £20.40 £34.00Inc. £19.98 £7.99 £23.97 £39.95


Exc. £15.00 £6.00 £18.00 £30.00Inc. £17.63 £7.05 £21.15 £35.25

SAWS

SPECIFICATIONS� 235mm blade diameter� Max. cut at 90º: 0mm-85mm� Max. cut at 45º: 64mm� Power: 1550W� Vibration level: 2.5m/s2


3170 235mm CIRCULAR SAW (1550W)

SPECIFICATIONS� Variable speed trigger 0-2500spm� Max. cut in pipe 90mm� Max. cut in wood 90mm� Power: 1020W� Vibration level: 4.55m/s2

� Noise power: 100dBA� Noise pressure: 88dBA� Four-stage orbital action� Adjustable front sole plate

3175 RECIPROCATING SAW

POW

ER TO

OLS

40


Exc. £18.00 £7.20 £21.60 £40.00Inc. £21.15 £8.46 £25.38 £47.00

Use for dry wall, ceiling, floor and deck fixing. Collated screwsautomatically feed into the machine. Faster fixing – saves time and money. Single handed operation.

SPECIFICATIONS � Variable speed trigger� Forward and reverse rotation� Max. screw 57mm length� Vari-speed 0-2800rpm� Power: 470W� Weight: 1.9kg� 240V or 110V

3036B AUTOFEED SCREWDRIVER


Exc. £26.00 £10.40 £31.20 £52.00Inc. £30.55 £12.22 £36.66 £61.10

SPECIFICATIONS � Provides increased durability over current cordless nailers� Nail length capacity 32mm-63mm� Firing mode – bump and sequential� Supplied with 2x batteries, charger, safety glasses,

belt hook, no-mark tip and carry case

3367 DeWALT CORDLESS NAILER


Exc. £23.00 £9.20 £27.60 £46.00Inc. £27.03 £10.81 £32.43 £54.05


Exc. £14.00 £5.60 £16.80 £28.00Inc. £16.45 £6.58 £19.74 £32.90

Variable speed drywall screwdriver. Depth sensitive.

SPECIFICATIONS� Power: 500W� No load speed: 0-2500rpm� Max. screw capacity shank diameter: 6mm� Noise level: 79dBA� Vibration level: <2.5m/s2

� Weight: 1.5kg

3042 SCREWDRIVER – ELECTRIC

You can make repetitive fastenings quickly and conveniently with nails upto 72mm long to concrete, steel and masonry materials.

SPECIFICATIONS� Automatic cartridge feed� Universal piston� Simple cleaning and servicing� Increased performance and reliability� Less recoil for improved comfort� Magazine capacity: nails in strips of 10, 14-72 long� 4 power levels (green, yellow, red and black)� Cartridges: 6.8/11 in strips of 10� Length: 460mm� Weight: 3.53kg including magazine

3300 CARTRIDGE HAMMER

FIXING EQUIPMENT

DON’T FORGET FIXINGS AVAILABLE FROMALL OUR TOOL HIRE OUTLETS

NEW


POWER TOOLS


Exc. £17.00 £6.80 £20.40 £34.00Inc. £19.98 £7.99 £23.97 £39.95


Exc. £14.00 £5.60 £16.80 £28.00Inc. £16.45 £6.58 £19.74 £32.90


Exc. £26.00 £10.40 £31.20 £52.00Inc. £30.55 £12.22 £36.66 £61.10


Exc. £26.00 £10.40 £31.20 £52.00Inc. £30.55 £12.22 £36.66 £61.10

Lightweight – reducing operator fatigue. Cordless – portable andconvenient with no set-up time. Versatile – drives 51-90mm nails.

SPECIFICATIONS � Weight: 3.1kg� Height: 368mm� Cycle rate: up to two per second� Fastener capacity: 55� Fuel cell life: approx. 18 months� Battery: approx. 4000 fixings per charge� 230V charger – max. charge time two hours� Vibration: 2.6m/s2

3365 PASLODE CORDLESS FRAMING NAILER

Lightweight – reducing operator fatigue. Cordless – portable andconvenient with no set-up time. Versatile – drives 19-64mm galvanisedfinished nails.

SPECIFICATIONS� Weight: 2.5kg� Height: 320mm� Cycle rate: up to two per second� Fastener capacity: two strips/100� Fuel cell life: approx. 12 months� Battery: a min. 4000 nails fixed per charge� 230V charger – max. charge time two hours� Noise level: 128dBA� Vibration level: 3m/s2

3366 PASLODE CORDLESS COMPACT BRADFINISHING NAILER

FIXING EQUIPMENT

DON’T FORGET SPECIALIST FIXINGS

SANDERS

SPECIFICATIONS � Clip system for conventional paper� Pad size w x l: 115mm x 229mm� Abrasive sheet size w x l: 115mm x 280mm� Orbit diameter: 2.6m� 10,000 orbits per minute� Power: 330W� Vibration level: 5m/s2

� Noise power: 85dBA� Noise pressure: 71dBA� Ultra low vibration

57501/2 SHEET ORBITAL FINISHING SANDER (330W)

High-power sander quickly smooths timber surfaces.Ideal for stair treads and confined spaces.

SPECIFICATIONS� Power: 1200W� No load speed: 450m/min� Noise level: 80dBA� Vibration level: <2.5m/s2

� Weight: 6.2kg� Belt size w x l: 100mm x 620mm

5760 BELT SANDER 100mm (4”) WIDTH

POW

ER TO

OLS

42


Exc. £27.00 £10.80 £32.40 £54.00Inc. £31.73 £12.69 £38.07 £63.45


Exc. £48.00 £19.20 £57.60 £102.00Inc. £56.40 £22.56 £67.68 £119.85


Exc. £25.00 £10.00 £30.00 £50.00Inc. £29.38 £11.75 £35.25 £58.75


Exc. £36.00 £14.40 £43.20 £72.00Inc. £42.30 £16.92 £50.76 £84.60

High performance, commercial grade drum floor sander, for sanding alltypes of wood flooring including parquet.

SPECIFICATIONS� 110V/240V� Drum width: 200mm� Noise level: 95dBA at 1m� Vibration level: 0.040HAeq8 (8 hr. RMS)� Weight: 41.5kg

5700 FLOOR SANDER

Versatile, extra-light machine for chiselling and breaking. Use for repairingjoints, light chipping, removing coats of paint, dirt and scaling.

SPECIFICATIONS� Power: 550W� Size h x w x d: 360mm x 85mm x 193mm� 0-3720bpm� Single impact energy: 2.2J� Noise level: sound power level 108dBA, sound pressure level 91dBA� Vibration level: 9m/s2

� Weight: 3.5kg

4840 NEEDLE GUN – ELECTRIC

High performance disc floor sander for edge sanding all types of woodflooring. Also ideal for stair treads and confined spaces.

SPECIFICATIONS� 110V/240V� Disc diameter: 178mm� Noise level: 100dBA� Vibration level: 0.033HAeq8 (8 hr. RMS)� Weight: 16.4kg

5710 FLOOR EDGE SANDER

5720 SPECIAL COMBINED RATEFOR 5700/5710

SANDERS

NEEDLE GUN

DON’T FORGET SANDING SHEETS, SANDING BELTS, VARNISHES & STAINS & SAFETY PPE EQUIPMENT

43

TILING



Exc. £36.00 £14.40 £43.20 £72.00Inc. £42.30 £16.92 £50.76 £84.60


Exc. £12.00 £4.80 £14.40 £24.00Inc. £14.10 £5.64 £16.92 £28.20


Exc. £39.00 £15.60 £46.80 £78.00Inc. £45.83 £18.33 £54.99 £91.65

Portable tile saw suitable for materials up to 30mm thick. Stainless steelworking surface tilts for mitre cuts. Easy cleaning. Precision guide.Removable galvanised tank.

SPECIFICATIONS � Size h x w x l: 287mm x 500mm x 560mm� Max. blade diameter: 250mm� Rot. speed of blade: 3000rpm� Power: 1kW� Weight: 24kg� Sound pressure level: 71dBA

2185 LARGE DIAMOND TILE CUTTER – ELECTRIC

Compact Pro 400mm tile cutter, twin beam cutting rails,simple ‘cut and snap’ operation. Built-in separator.


2190 HAND TILE CUTTER

Vibrating blade tool ideal for lifting tiles including ceramic, vinyl,linoleum and carpet.

SPECIFICATIONS� 110V� Blade size w x l: 75mm x 230mm� Noise level: 78.5dBA� Vibration level: 15m/s2

� Weight: 45kg

5055 FLOOR TILE STRIPPER

TILING

EN 12418

WEAR CHARGES APPLY ON ALL DIAMOND BLADES

BREA

KING

& D

EMOL

ITIO

N

44


Exc. £20.00 £8.00 £24.00 £40.00Inc. £23.50 £9.40 £28.20 £47.00


Exc. £22.00 £8.80 £26.40 £44.00Inc. £25.85 £10.34 £31.02 £51.70


Exc. £21.00 £8.40 £25.20 £42.00Inc. £24.68 £9.87 £29.61 £49.35


Exc. £21.00 £8.40 £25.20 £42.00Inc. £24.68 £9.87 £29.61 £49.35

BREAKERS

SPECIFICATIONS� Rotary hammer drill & hammer only modes� 45mm max. in concrete� 125mm max. TCT core diameter� Variable bpm: 1,250-2,500� Variable speed: 120-240rpm� Power: 1300W� 8.3J impact energy� Vibration level: 11m/s2

� Noise power: 105dBA� Noise pressure: 92dBA� Torque limiter for safety� Anti-vibration system

2700 7.8kg SDS MAX ROTARY DEMOLITIONHAMMER – MEDIUM-DUTY

5kg SDS MAX chipping hammer, for medium-duty chiselling,chasing and breaking.

SPECIFICATIONS� Power: 1100W� Impact rate: 2-12J – 1,300-3,000ipm (impacts per minute)� Noise level: 88/101dBA� Vibration level: 11m/s2

� Weight: 5.5kg� Tool holder SDS MAX



2780 6.2kg SDS MAX ROTARY DEMOLITIONHAMMER – LIGHT-DUTY

Heavy-duty breaker for chiselling, breaking and chasing,with SDS MAX chuck.

SPECIFICATIONS� Power: 1500W� Impact rate: 900-1890ipm� Single impact force: 6-25J� Noise level: 88/108dBA� Vibration level: 14m/s2

� Weight: 10.1kg

2775 DEMOLITION HAMMER– HEAVY-DUTY2770 DEMOLITION HAMMER

– MEDIUM-DUTY

DON’T FORGET POINTS, CHISELS,BOLSTERS, OIL & EXTENSION LEADS


BREAKING & DEMOLITIONVAT 24 HRS ADDT 24 HRS WEEKEND WEEK

Exc. £36.00 £14.40 £43.20 £72.00Inc. £42.30 £16.92 £50.76 £84.60


Exc. £54.00 £21.60 £64.80 £108.00Inc. £63.45 £25.38 £76.14 £126.90


Exc. £33.00 £13.20 £39.60 £66.00Inc. £38.78 £15.51 £46.53 £77.55


Exc. £22.00 £8.80 £26.40 £44.00Inc. £25.85 £10.34 £31.02 £51.70

BREAKERS



2705 10kg SDS MAX ROTARY DEMOLITION HAMMER

Powerful vibration damped breaker with Active Vibration Reduction – up to 50% reduction in vibration. Ideal for the removal and demolition of concrete, masonry, stone and asphalt.

SPECIFICATIONS� Power: 1600W� Noise level: sound power <108dBA� Vibration level: 8m/s2

� Weight: 11.3kg

2706 LOW VIBRATIONDEMOLITION HAMMER

High performance heavy-duty hydraulic breaker unit for demolitionand roadwork.

SPECIFICATIONS� Petrol driven� Powerpack size h x w x l: 610mm x 530mm x 720mm� Powerpack weight: 63kg, breaker weight: 25kg� Hose length: 7m� Noise level: breaker 109dBA, powerpack 88.6dBA at 1m� Vibration level: breaker 4m/s2

2730 HYDRAULIC BREAKER UNIT PETROL – HEAVY-DUTY

Heavy-duty electric breaker – use on roads, floors, foundations andcompacted ballast.

SPECIFICATIONS� Power: 1900W� Impact rate/force: 1260ipm/60J� Noise level: 91/111dBA� Vibration level: 13m/s2

� Weight: 29kg

2710 ROAD/DEMOLITION BREAKER– ELECTRIC c/w TROLLEY HYDRAULIC BREAKERS

Conforms to EHTMA Category C Regulations


Exc. £85.00 £34.00 £102.00 £170.00Inc. £99.88 £39.95 £119.85 £199.75


Exc. £29.00 £11.60 £34.80 £58.00Inc. £34.08 £13.63 £40.89 £68.15


Exc. £52.00 £20.80 £62.40 £104.00Inc. £61.10 £24.44 £73.32 £122.20


Exc. £26.00 £10.40 £31.20 £52.00Inc. £30.55 £12.22 £36.66 £61.10

LIGH

TING

& P

OWER

46

GENERATING

Cast iron sleeve. Dual element air filter. Low oil shut down. Circuit breaker protected.

SPECIFICATIONS � Rated power: 2100W� Engine type/hp: Vanguard 6hp� Fuel capacity: 4ltr� Run time at 50% load: 4hrs 5mins� Weight: 43kg� Size l x w x h: 570mm x 410mm x 440mm� Noise level LwA/dB at 7m: 98/73

4200 2.2kVA GENERATOR – PETROL

Diesel powered, super silenced.

SPECIFICATIONS � 6.4kW� Seven sockets: 4 x 115V, 3 x 240V� Size l x w x h: 1350mm x 650mm x 850mm� Dry weight: 270kg� Run time: 16.7hrs at 75%� Guaranteed noise level: 69dBA at 7m

4220 8kVA GENERATOR, SILENCED – DIESEL

Low oil sensor. Circuit breaker protected. Full frame. Optional wheel kit.

SPECIFICATIONS � Rated power: 2700W� Engine type/hp: Vanguard 6hp� Fuel capacity: 4ltr� Run time at 50% load: 3hrs 30mins� Weight: 43kg� Size l x w x h: 590mm x 420mm x 470mm� Noise level LwA/dB at 7m: 99/74

4205 3.5kVA GENERATOR– PETROL

4215 5kVA GENERATOR

IMPORTANT NOTICEOur generators are not suitable for

powering sensitive electronic equipmentLarger generators available on request

Electric start. Low oil sensor. Circuit breaker protected. Full frame.Wheeled frame.

SPECIFICATIONS � Rated power: 4200W� Equivalent max. kVA: 3.4� Engine type/hp: Lombardini 9hp – diesel� Fuel capacity: 5ltr� Run time at 50% load: 4hrs 10mins� Weight: 119kg� Size l x w x h: 870mm x 590mm x 800mm� Noise level LwA/dB at 7m: 99/74


Exc. £8.00 £3.20 £9.60 £16.00Inc. £9.40 £3.76 £11.28 £18.80


Exc. £28.00 £11.20 £33.60 £56.00Inc. £32.90 £13.16 £39.48 £65.80


Exc. £15.00 £6.00 £18.00 £30.00Inc. £17.63 £7.05 £21.15 £35.25


Exc. £4.00 £1.60 £4.80 £8.00Inc. £4.70 £1.88 £5.64 £9.40


Exc. £13.00 £5.20 £15.60 £26.00Inc. £15.28 £6.11 £18.33 £30.55


Exc. £10.00 £4.00 £12.00 £20.00Inc. £11.75 £4.70 £14.10 £23.50


Exc. £9.00 £3.60 £10.80 £18.00Inc. £10.58 £4.23 £12.69 £21.15


LIGHTING & POWER

LIGHTING

TRANSFORMERS

Heavy-duty tripod. 500W Tungsten halogenoval head. Adjustable 1.5m-2.5m and fittedwith a 5m cable.

4260 TRIPOD FLOODLIGHT 500W – 110V

500W site duty minipod light. One-piecesteel frame. Soft grip handle. 3m cable.

4261 HAND HELD FLOODLIGHT500W – 110V

For site applications. 2 x 16 amp outlets.

SPECIFICATIONS� 110V� 16 amp� Weight: 18.44kg

4360 3kVA TRANSFORMER

Industrial 110V power tool transformer.2 x 16 amp and 1 x 32 amp outlets.

SPECIFICATIONS� 110V� 16/32 amp� Weight: 33.92kg


Site-specific single phase transformer. Robust steel casing. MCB protection againstoverload. Fork lifting points, 4 x 16 amp and 2 x 32 amp outlets. Needs hard wiring into mains supply.

SPECIFICATIONS� 110V� 16/32 amp� Weight: 90.4kg


Site festoon kit. Moulded fittings. 22m cablewith 10 x 60W bulbs.

SPECIFICATIONS� 110V� 600W� 2.5mm cable� 16 amp plug� Weight: 4kg

4275 FESTOON LIGHT STRING22m – 110V

Robust construction. Self-righting whenknocked. Multiple linking capacity. 5m cable.

SPECIFICATIONS� Low wattage (36W)� Dual voltage range 85-277V� 16 amp power take-off point� Weight: base 6kg, lighting assembly: 2.25kg

4266 1.5m (4’) PLASTERER’S UP LIGHT

Manufactured to BS5429and BS4343


Exc. £7.00 £2.80 £8.40 £14.00Inc. £8.23 £3.29 £9.87 £16.45


Exc. £6.00 £2.40 £7.20 £12.00Inc. £7.05 £2.82 £8.46 £14.10


Exc. £4.00 £1.60 £4.80 £8.00Inc. £4.70 £1.88 £5.64 £9.40


Exc. £4.00 £1.60 £4.80 £8.00Inc. £4.70 £1.88 £5.64 £9.40


Exc. £4.00 £1.60 £4.80 £8.00Inc. £4.70 £1.88 £5.64 £9.40


Exc. £7.00 £2.80 £8.40 £14.00Inc. £8.23 £3.29 £9.87 £16.45


Exc. £2.00 £0.80 £2.40 £4.00Inc. £2.35 £0.94 £2.82 £4.70

LIGH

TING

& P

OWER

48

SITE DISTRIBUTION

16 amp plug with 13 amp socket and1.5mm PVC core.

4245 TAIL ADAPTOR – 240V

SPECIFICATIONS� 110V� 16 amp plug and socket� 1.5mm Arctic grade cable

4310 EXTENSION LEAD (16 amp)14m – 110V

Ideal for site use. Tough steel frame.Rubberised drum.

SPECIFICATIONS� 1.5mm cable� 110V has 2 x 16 amp outlets� 240V has 2 x 13 amp outlets

4315 25m CABLE REEL – 110V & 240V





Steel cased four-way 110V, 16 ampdistribution box. 5 metres of cable.

SPECIFICATIONS� 110V� 2.5mm cable with 16 amp plug

4300 FOUR-WAY JUNCTION BOX– 110V

Fibreglass cased RCD unit.

SPECIFICATIONS� 240V� 13 amp plug� 16 amp socket

4305 CIRCUIT BREAKER


Exc. £4.00 £1.60 £4.80 £8.00Inc. £4.70 £1.88 £5.64 £9.40


Exc. £54.00 £21.60 £64.80 £108.00Inc. £63.45 £25.38 £76.14 £126.90


Exc. £32.00 £12.80 £38.40 £64.00Inc. £37.60 £15.04 £45.12 £75.20


Exc. £42.00 £16.80 £50.40 £84.00Inc. £49.35 £19.74 £59.22 £98.70


Exc. £30.00 £12.00 £36.00 £60.00Inc. £35.25 £14.10 £42.30 £70.50


Exc. £26.00 £10.40 £31.20 £52.00Inc. £30.55 £12.22 £36.66 £61.10


PUMPING EQUIPM

ENTIdeal for removal of ground water from pits,cellars, basements and building yards.

SPECIFICATIONS � Max. head: 11m� Max. flow: 230ltr/min� Motor output: 0.48kW

4505 50mm (2”) SUBMERSIBLE PUMP

4560 ADDITIONAL PUMP HOSEPER 10m LENGTH

Ideal for removal of flood water from floors,emptying low level pools and puddles,dewatering basements (no sump required).

SPECIFICATIONS � Max. head: 11m� Max. flow: 180ltr/min� Motor output: 0.48kW

4510 25mm (1”) RESIDUE PUMP

Provides continuous drainage, capable ofpumping slurries and sand, primedautomatically, runs dry indefinitely.

SPECIFICATIONS� 4hp petrol engine� Max. output: 180ltr/min� Max. head: 12.2m� Max. solids diameter:13mm� Weight: 68kg� Noise level: 98dBA

4530 50mm (2”) DIAPHRAGM PUMP – PETROL

PUMPING

Ideal for removal and transfer of ground water from sumps, pits, pools and puddles. Ideal for washdown.

SPECIFICATIONS � Four-stroke petrol engine� Max. head: 30m� Max. flow: 35m3/hr� Motor output: 4hp

4520 CENTRIFUGAL PUMP

SPECIFICATIONS� 7.5hp diesel engine� Max. output: 417ltr/min� Max. head: 9.1mm� Max. solids diameter: 25mm� Weight: 433kg� Noise level: 108dBA

4535 75mm (3”) SPATE SLUDGE PUMP – DIESEL


Exc. £52.00 £20.80 £62.40 £104.00Inc. £61.10 £24.44 £73.32 £122.20


Exc. £34.00 £13.60 £40.80 £68.00Inc. £39.95 £15.98 £47.94 £79.90

SURV

EYIN

G EQ

UIPM

ENT

50

SURVEYING EQUIPMENT

High-precision instrument utilised for professional site surveys. Immune tovibration, shock and other environmental conditions – produces accuratemeasurements even in arduous conditions. Features very short distancefocus 300mm for use in confined spaces.

SPECIFICATIONS � Magnification: 22x� Accuracy: 2mm (0.008’) standard deviation for 1km� Weight: 1.8kg� Size l x w x h: 280mm x 200mm x 195mm

7210 AUTO LEVEL

Automatic self-levelling laser with a working radius of 300m (1000ft)diameter 360º. Extremely easy to setup – just press a button and go to work. Allows the automatic self-levelling system to be bypassed so the laser can be used to match existing slopes and grades as well as forvertical applications.

SPECIFICATIONS � Range: 300m (1000’)� Accuracy: ±30 seconds

(±4mm/30m or ±3/16”/100’)� Weight: 2.1kg� Size l x w x h: 510mm x 420mm x 220mm

7226 AUTOMATIC SELF-LEVELLING LASER


Exc. £28.00 £11.20 £33.60 £56.00Inc. £32.90 £13.16 £39.48 £65.80


Exc. £28.00 £11.20 £33.60 £56.00Inc. £32.90 £13.16 £39.48 £65.80


Exc. £52.00 £20.80 £62.40 £104.00Inc. £61.10 £24.44 £73.32 £122.20


SURVEYING EQUIPMENT

SURVEYING EQUIPMENT

Self-contained transmitter for tracing non-metallic pipes, drains andconduits. Sonde can be attached to standard drain rods. Network rail approved.

SPECIFICATIONS � Max. detection range: 5m � Estimated battery life: 50 hours

7230 CABLE AVOIDING TOOL/SIGNALGENERATOR/SONDE (MOUSE)

Industry standard design which every ground working operative will findfamiliar and easy-to-use. User-friendly features – lightweight, ruggeddesign packed full of features. Network rail approved.

SPECIFICATIONS � Three detection modes:

Power mode – for detecting live, imbalanced cables; Radio mode – for detecting re-radiated radio signals; Transmit mode – for detecting conductors carrying the signal generated bythe generator

� LCD display shows signal strength, battery condition, operating mode� Weight: 3kg� Size l x w x h: 720mm x 280mm x 70mm

7231 CABLE AVOIDING TOOL

Enhances the detectability of pipes and cables. Portable battery poweredunit, used with the cable locator to produce a signal. Network rail approved.

SPECIFICATIONS � Typical tracing range:

Induced mode – 200m; Direct connect mode – 350m

� Power rating: 9V battery with 30hrs intermittent use� Weight: 2.5kg� Size l x w x h: 320mm x 360mm x 145mm

7232 SIGNAL GENERATOR


Exc. £42.00 £16.80 £50.40 £84.00Inc. £49.35 £19.74 £59.22 £98.70VAT 24 HRS ADDT 24 HRS WEEKEND WEEK

Exc. £31.00 £12.40 £37.20 £62.00Inc. £36.42 £14.57 £43.71 £72.85


Exc. £15.00 £6.00 £18.00 £30.00Inc. £17.63 £7.05 £21.15 £35.25


Exc. £22.00 £8.80 £26.40 £44.00Inc. £25.85 £10.34 £31.02 £51.70


Exc. £29.00 £11.60 £34.80 £58.00Inc. £34.08 £13.63 £40.89 £68.15

HEAT

ING,

DRY

ING

& CO

OLIN

G

52

HEATERS

Multi-task radiant halogen heater. Completewith two 1.4kW Toshiba Slim Line Ruby QuartzHalogen tubes. 110V and 230V versions.

SPECIFICATIONS� Heats objects not atmosphere� Adjustable head for heat direction� 2 x 1400W infra-red elements� 2 heat settings with auto cut-out on 230V� 5m cable and fitted plug� Wheels for easy mobility� Steel heater cassette and plastic heater body� 110V machine must be used with a

5KVA continuous rating transformer

4405 ELECTRIC HALOGEN HEATER

Butane gas fuelled catalytic 3kW heater –no carbon monoxide produced.Three heat settings.

SPECIFICATIONS� Variable heat output 2kW-3kW� Piezoelectric ignition� Does not produce carbon monoxide� Flat top with easy to use control panel� Dimensions: 43w x 72h x 32d� Weight: 10kg

4401 CABINET HEATER – CATALYTIC

Propane fired portable heaters. Variable heatoutput. Dual voltage selection.

SPECIFICATIONS� 1 x 47kg propane cylinder� 85-125,000btu (14-44kW)� 110V/230V� Heated air: 0.278m3/s� Weight: 19.4kg

4430 SPACE HEATER 125,000 BTU– PROPANE

SPECIFICATIONS� 2 x 47kg propane cylinder� 116-260,000btu (33-82.1kW)� 110V/230V� Heated air: 0.528m3/s� Weight: 29.6kg

4440 SPACE HEATER 260,000 BTU– PROPANE

Temporary portable heater. Instant radiant heat.Can be wall mounted or suspended. 3m cable.

SPECIFICATIONS� 110V� 2 x 1500W elements� Weight: 4kg

4406 CERAMIC HEATER – 3kW

3kW electric heater. Can be ducted to 5m.

SPECIFICATIONS� 230V� 360m3/hr� Weight: 11kg

4408 FAN HEATER – 3kW

DON’T FORGET GAS AVAILABLE FOR SALE


Exc. £14.00 £5.60 £16.80 £28.00Inc. £16.45 £6.58 £19.74 £32.90


Exc. £65.00 £26.00 £78.00 £130.00Inc. £76.38 £30.55 £91.65 £152.75


Exc. £23.00 £9.20 £27.60 £46.00Inc. £27.02 £10.81 £32.43 £54.05


Exc. £52.00 £20.80 £62.40 £104.00Inc. £61.10 £24.44 £73.32 £122.20


Exc. £34.00 £13.60 £40.80 £68.00Inc. £39.95 £15.98 £47.94 £79.90


HEATING, DRYING & COOLINGCompact and portable commercialdehumidifiers. Suitable for construction anddisaster restoration use.

SPECIFICATIONS� Up to 22ltr/24hr, operating range –

humidity 40-100%� Temp: 3-30°C� Weight: 41kg� Noise level: 57dBA at 1m

4385 DEHUMIDIFIER – SMALL

SPECIFICATIONS� Up to 52ltr/24hr, operating range –

humidity 40-100%� Temp: 3-30°C� Weight: 60kg� Noise level: 61dBA

4390 DEHUMIDIFIER – LARGE

Powerful 8,000btu/2.3kW cooling capacity.Able to take 2.5m extension hose for highwindows and false ceilings. Automaticcondensate removal via the exhaust hose, so noemptying or filling with water. Automatic fansetting. Temperature control. Low noise level.

SPECIFICATIONS � Noise level: 45dBA

4450 AIR CONDITIONING UNIT Three-speed portable carpet and upholstery dryer.


4392 POWER CARPET DRYER

DRYERS

AIR CONDITIONING


Exc. £4.00 £1.60 £4.80 £8.00Inc. £4.70 £1.88 £5.64 £9.40


Exc. £41.00 £16.40 £49.20 £82.00Inc. £48.18 £19.27 £57.81 £96.35

Hydro twin piston pump head. Suction andreturn hose fitted with strainer. Power take offpoint for drill or breaker. Four-way manifoldcomplete with 10” rods.

SPECIFICATIONS� 110V� 250W motor� Weight: 23kg

5600 DAMP PROOF INJECTION MACHINE

5605 WOODWORM SPRAYATTACHMENT FOR 5600

DON’T FORGET INJECTION FLUID

DAMP PROOFING


Exc. £18.00 £7.20 £21.60 £36.00Inc. £21.15 £8.46 £25.38 £42.30


Exc. £10.00 £4.00 £12.00 £20.00Inc. £11.75 £4.70 £14.10 £23.50


Exc. £80.00 £32.00 £96.00 £160.00Inc. £94.00 £37.60 £112.80 £188.00


Exc. £16.00 £6.40 £19.20 £32.00Inc. £18.80 £7.52 £22.56 £37.60


Exc. £16.00 £6.40 £19.20 £32.00Inc. £18.80 £7.52 £22.56 £37.60


Exc. £42.00 £16.80 £50.40 £84.00Inc. £49.35 £19.74 £59.22 £98.70

PLUM

BING

EQUI

PMEN

T

54

PIPE THREADING

PIPE BENDING

High performance power threader. Built in pipeclamp gives in-situ threading without a vice.15-25rpm threading with 60rpm gearedreverse. Light, totally portable.

SPECIFICATIONS� 110V� Power: 750W� Cutting speed: 15-25rpm, 60rpm rapid reverse� Noise level: 87dBA� Vibration level: 5.9m/s2

� Weight: 18kg

Advanced design ratchet stocks and highspecification die heads and dies allow easythreading of steel pipe and conduit in tight spaces.


4720 RATCHET THREADER 13mm-32mm (1/2”-11/4”)

Industrial standard portable tube bender forcopper and light grade stainless steel tube.


4670 PIPE BENDER12-15-22mm

On-site folding stand bender to 180° precisionbending in copper, steel and thin walledstainless steel.


4680 COPPER PIPE BENDER15mm-35mm


4725 RATCHET THREADER 13mm-50mm (1/2”- 2”)

Compact yet powerful pipe cutting. Reamingand threading machine with pumped oiling.Easy to change die heads and safety foot switch.

SPECIFICATIONS� 110V� Power: 1140W� Working speed: 22/55rpm� Size l x w x h: 720mm x 510mm x 475mm� Noise level: 80dBA� Weight: 128kg

4736 PIPE THREADING MACHINE13mm-100mm (1/2”- 4”)

TUV GS

TUV GS

4730PIPE THREADER 13mm-50mm (1/2”- 2”) – ELECTRIC


Exc. £40.00 £16.00 £48.00 £80.00Inc. £47.00 £18.80 £56.40 £94.00


Exc. £7.00 £2.80 £8.40 £14.00Inc. £8.23 £3.29 £9.87 £16.45


Exc. £16.00 £6.40 £19.20 £32.00Inc. £18.80 £7.52 £22.56 £37.60


PLUMBING EQUIPM

ENTTESTING

For conducting hydrostatic pressure tests on water or oil carryingpipework systems.

SPECIFICATIONS� Max. pressure: 60bar (840psi)� Connection: R1/2” BSPT� Weight: 8kg

4600 PRESSURE TEST PUMP

Kit containing all components required for completing a drain test.Comprises: 100mm (4”) U-gauge, hand bellows, Y-piece connector,manometer tubing, 25mm (1”) and 12.5mm (1/2”) brass nipples.

4615 DRAIN TESTING KIT

Portable pipe freezing kit which allows work onplumbing systems without the need for drainingdown or locating the shut-off valve.Works on all pipe materials.

SPECIFICATIONS� 110V/240V� Capacity: 8mm-42mm pipe� Freeze time: 5-45mins� 550W� Noise level: 46dBA (approx.)� Weight: 23kg

4650 PIPE FREEZING KIT 42mm MAX – ELECTRIC

PIPE FREEZING

DRAIN CLEARING


Exc. £8.00 £3.20 £9.60 £16.00Inc. £9.40 £3.76 £11.28 £18.80

SPECIFICATIONS� 10 x polypropylene drain rods, each 0.9m (3’) x 19mm (3/4”)� 1 x 100mm (4”) rubber plunger� 1 x double worm screw� 1 x 100mm (4”) drop scraper

7080 DRAIN ROD SET


Exc. £23.00 £9.20 £27.60 £46.00Inc. £27.03 £10.81 £32.43 £54.05


Exc. £34.00 £13.60 £40.80 £68.00Inc. £39.95 £15.98 £47.94 £79.90


Exc. £25.00 £10.00 £30.00 £50.00Inc. £29.38 £11.75 £35.25 £58.75


Exc. £15.00 £6.00 £18.00 £30.00Inc. £17.63 £7.05 £21.15 £35.25

Industrial carpet cleaner suitable for cleaningcarpets, upholstery and many types of textilesurfaces. User friendly waste water tank lifts out for easy disposal of the dirty water.

SPECIFICATIONS� 1250W motor� One bar spray pressure� Tank capacity: fresh 10ltr, waste 9ltr� Noise level: 68dBA� Weight: 10.3kg� Hose length: 2.5m

CLEA

NING

56

VACUUM CLEANERS

Ideal for site work requiring medium-duty unitfor wet/dry applications.

SPECIFICATIONS� Noise level: 79dBA� Capacity: waste bag 14ltr, container 25ltr� Weight: 5.6kg

5000 SINGLE MOTOR VACUUM– 110V/240V

5020 CARPET CLEANER

5025 UPHOLSTERY ATTACHMENTTO SUIT 5020

SPECIFICATIONS� 2000W power head� 120V/230V AC 50/69Hz� 80ltr/sec airflow� 2200mm of suction� 40ltr dry capacity, 30ltr wet capacity� 31.8m cleaning range� Weight: 22.5kg� Size d x w x h: 720mm x 490mm x 880mm� Wet and dry use

5005 TWIN MOTOR VACUUM– 30ltr CAPACITY

SPECIFICATIONS� 2000W power head� 120V/230V AC 50/60Hz� 80ltr/sec airflow� 2200mm of suction� 70ltr wet capacity� 26.8m cleaning range� Weight: 32kg� Size d x w x h: 620mm x 564mm x 975mm� Wet use only machine

5010 TWIN MOTOR VACUUM– 70ltr CAPACITY

DON’T FORGET SHAMPOO, DEFOAMER & PRE-SPOTTER



Exc. £76.00 £30.40 £91.20 £152.00Inc. £89.30 £35.72 £107.16 £178.60


Exc. £56.00 £22.40 £67.20 £112.00Inc. £65.80 £26.32 £78.96 £131.60


Exc. £39.00 £15.60 £46.80 £78.00Inc. £45.83 £18.33 £54.99 £91.65


Exc. £25.00 £10.00 £30.00 £50.00Inc. £29.38 £11.75 £35.25 £58.75


PRESSURE WASHERS

Industrial cold water pressure washer suitablefor both light and commercial cleaning. 10m ofhigh pressure hose allows cleaning applicationsto be carried out without having to move the machine.

SPECIFICATIONS � Power: 230V� 130 bar (1900psi)� 550ltr/hour water flow rate� Noise level: 71dBA� Weight: 26kg

5090 LIGHT-DUTY PRESSURE WASHER

Rugged industrial cold water pressure washer. 10m of high pressure hose. Triple nozzle offershigh pressure pencil jet, high pressure fan jetand low pressure jet for cleaning with detergent.

SPECIFICATIONS � Power: 230V� 155 bar (2200psi)� 550ltr/hour water flow rate� Noise level: 71dBA� Weight: 37kg

5100 COLD PRESSURE WASHER – ELECTRIC

Petrol powered cold water pressure washer.Tubular steel frame, side mounted mesh guardsand rubber-tyred wheels make this a robustmachine, ideal where an electric power supplyis unavailable.

SPECIFICATIONS � Power 11hp Honda petrol engine� 210 bar� 850ltr/hour water flow rate� Noise level: 94dBA� Weight: 82kg

5110 COLD PRESSURE WASHER – PETROL

SPECIFICATIONS � Max. temperature: 80ºC� Power: 240V� 120 bar (1750psi)� 530ltr/hour water flow rate� Noise level: 70dBA� Weight: 84kg

5150 HOT PRESSURE WASHER240V – ELECTRIC

Compact hot water and steam pressure washer.Integral fuel and detergent tanks.

SPECIFICATIONS � Max. temperature: 140ºC� Power: 110V� 90 bar (1300psi)� 550ltr/hour water flow rate� Noise level: 70dBA� Weight: 84kg

5150 HOT PRESSURE WASHER110V – ELECTRIC 110V

240V

57

CLEANING

FLOO

RING

PRE

PARA

TION

58


Exc. £11.00 £4.40 £13.20 £22.00Inc. £12.93 £5.17 £15.51 £25.85

Adjustable knee kicker for stretching carpet into position without damaging the pile or backing.

SPECIFICATIONS� Adjustable size: 480mm to 610mm� Weight: 2.5kg

7000 CARPET STRETCHER


Exc. £8.00 £3.20 £9.60 £16.00Inc. £9.40 £3.76 £11.28 £18.80


Exc. £23.00 £9.20 £27.60 £46.00Inc. £27.03 £10.81 £32.43 £54.05


Exc. £14.00 £5.60 £16.80 £28.00Inc. £16.45 £6.58 £19.74 £32.90

FLOORING EQUIPMENT

Mallet drive stapler for plywood and hardboardfloor underlayment.

SPECIFICATIONS� Holds 200 x 18 gauge staples� Staple length: 16mm-22mm� Weight: 1.5kg

3325 SPOT NAILER c/w MALLET

Mallet drive nailer for tongue and grooveflooring. Suitable for hardwood floors 12mm to26mm. Uses either L or T type nails.Non-marring plastic base.


3326 TONGUE AND GROOVENAILER c/w MALLET

For closing up floorboards before nailing.Spring loaded cams give positive grip on joists.

SPECIFICATIONS� Joist capacity: 11/2”-31/2”

7085 FLOORBOARD CRAMP

FLOOR CLEANING/PREPARATION


Exc. £32.00 £12.80 £38.40 £64.00Inc. £37.60 £15.04 £45.12 £75.20

SPECIFICATIONS � 1000W motor� 110V/240V� 230rpm speed� 450mm deck size� 22m cleaning range� Weight: 32kg� Size h x w x d: 1185mm x 580mm x 450mm� Large range of optional accessories available� Vibration level: 2.15m/s2

5050 FLOOR POLISHER/SCRUBBER


EXTRACTORSEXTRACTORS


Exc. £36.00 £14.40 £43.20 £72.00Inc. £42.30 £16.92 £50.76 £84.60

For cooling, ventilation and fume extraction. Suitable for distance up to15m. 5m of retractable 300mm (12”) ducting.

SPECIFICATIONS� 110V/240V� 550W motor� Flow rate: 3600m3/hr� Weight: 16kg

4395 FUME EXTRACTOR


Exc. £36.00 £14.40 £43.20 £72.00Inc. £42.30 £16.92 £50.76 £84.60

Compact dust extractor with 25 litre capacity.

SPECIFICATIONS � 1200W power input� Extraction capacity: 2150ltr/min at 6m bar� Container: 25ltr� Noise level: 69dBA� Weight: 16kg (inc. packaging)� Soft start� Remote automatic switching� ‘PlusClean’ filter system

4905 DUST EXTRACTION UNIT – LIGHT-DUTY


Exc. £44.00 £17.60 £52.80 £88.00Inc. £51.70 £20.68 £62.04 £103.40

Compact commercial grade dust extractor, featuring automatic dustbagging and reverse pulse jet filter cleaning system.

SPECIFICATIONS� 110V/240V� Noise level: 80dBA� Weight: 24kg

4900 DUST EXTRACTION UNIT – HEAVY-DUTY

DECO

RATI

NG

60


Exc. £16.00 £6.40 £19.20 £32.00Inc. £18.80 £7.52 £22.56 £37.60


Exc. £6.00 £2.40 £7.20 £12.00Inc. £7.05 £2.82 £8.46 £14.10


Exc. £10.00 £4.00 £12.00 £20.00Inc. £11.75 £4.70 £14.10 £23.50


Exc. £90.00 £36.00 £108.00 £180.00Inc. £105.75 £42.30 £126.90 £211.50

SPRAY EQUIPMENT

TYROLEAN MACHINE

STRIPPERS

Complete with 15m (50’) hose, spraygun and appropriate spray tip. Handlesthe full range of smooth decorative paints, including light varnish and stains,gloss, primers, eggshell, vinyl emulsions and heavy masonry paints.

SPECIFICATIONS � Max. pressure: 3300psi� Max. tip size: 0.58mm (0.023”)� Max. delivery: 2.1ltr/min� Noise level: 90dBA� Weight: 20kg� Voltage: 110V� Minimum transformer: 1.5kVA continuous

5550 AIRLESS SPRAY UNIT – ELECTRIC Heat gun with variable setting.

SPECIFICATIONS � Rated input: 2300W� Temperature: 50ºC -660ºC (230V), 50ºC-600ºC (110V)� Airflow rate: 250-500 ltr/min� Continuous temperature control� Continuous airflow control� Digital display� Nozzle diameter: 25mm� Noise level: <70dBA� Weight: 0.9kg

5665 HOT AIR PAINT STRIPPER

Ideal for removing all types of wallpaper, whether multi-layered orpainted, vinyls or decorative finishes such as Artex. Profiled step for accessto hard to reach areas without the use of a stepladder.

SPECIFICATIONS � Tank capacity: 7.5ltr� Hose length: 5m coolrun hose� Cable length: 5m� 240V model – power: 2750W, steam up time: 18mins, steaming time: 100mins� 110V model – power: 1760W, steam up time: 30mins, steaming time: 190mins� Steam plate size w x l: 250mm x 320mm

5650 WALLPAPER STRIPPER

Hand-operated roughcast applicator.


7100 TYROLEAN MACHINE – MANUAL

Airless system that sprays at high pressure and is morethan 10 times faster than a roller. It’s much easier to usethan airspray as there’s no air to make overspray and no

adjustments on the gun.


Exc. £60.00 £24.00 £72.00 £120.00Inc. £70.50 £28.20 £84.60 £141.00


Exc. £10.00 £4.00 £12.00 £20.00Inc. £11.75 £4.70 £14.10 £23.50


Exc. £35.00 £14.00 £42.00 £70.00Inc. £41.13 £16.45 £49.35 £82.25


Exc. £18.00 £7.20 £21.60 £36.00Inc. £21.15 £8.46 £25.38 £42.30


LANDSCAPINGLAWN CARE

6520 ROTARY MOWER – PETROL

Ideal for laying cables/pipes and landscaping. Cutting width 300mm(12”). Cutting depth up to 35mm. Adjustable handle with engage lever.Gearbox with one forward and one reverse gear.

SPECIFICATIONS� 5.5hp Honda engine� Noise level: 96dBA� Vibration level: 12m/s2

� Weight: 65kg

6530 LAWN SCARIFIER – PETROL

SPECIFICATIONS� Horsepower: 3hp (DIN)� Working width: 40cm� Electronic ignition� Wheel diameter: 180mm� Vibration level: 7.3m/s2

� Noise power: 85dBA

6536 TURF CUTTER – PETROL

SPECIFICATIONS� Plastic bodied construction� Weight when filled with water: 63.5kg� Roller width: 570mm

6560 PLASTIC GARDEN ROLLER

20” cutting width. Rubber wheels with single point height adjustment witheight settings 25-110mm. Cloth grass bag with metal frame.

SPECIFICATIONS� 5.5hp Honda engine� Capacity: 70ltr� Noise level: 96dBA� Vibration level: 12m/s2

� Weight: 42kg

LAND

SCAP

ING

62


Exc. £48.00 £19.20 £57.60 £96.00Inc. £56.40 £22.56 £67.68 £112.80



Exc. £45.00 £18.00 £54.00 £90.00Inc. £52.88 £21.15 £63.45 £105.75

SHREDDERS

Ideal for reducing branches and saplings to chippings and shreddingcuttings and green waste to mulch.

SPECIFICATIONS� 6.5hp� Capacities: chipping 50mm (2”), shredding 10mm� Noise level: up to 102dBA� Weight: 80kg

6540 6.5hp PETROL GARDEN SHREDDER

Extracts most stumps up to 300mm diameter and 5000kg. Freestandingand operated by one man. Fits in the boot of most cars and can be used toremove concrete based fence posts.

SPECIFICATIONS� Closed height: 1120mm� Extended height: 1550mm� Weight: 98kg� Max. single lift: 400mm� Leg adjustment single: 50mm� Leg adjustment total: 450mm

6690 STUMP EXTRACTOR

SPECIFICATIONS� 13hp� Capacities: chipping 100mm (4”), shredding 20mm (3/4”)� Noise level: up to 102dBA� Weight: 100kg

6541 13hp PETROL GARDEN SHREDDER


Exc. £64.00 £25.60 £76.80 £128.00Inc. £75.20 £30.08 £90.24 £150.40


Exc. £36.00 £14.40 £43.20 £72.00Inc. £42.30 £16.92 £50.76 £84.60


LANDSCAPINGROTAVATORS

Rugged, robust and reliable machine, with one forward gear. Ideal forborders, allotments and plots. Simple and safe to operate. Petrol driven.

SPECIFICATIONS� 5hp� Working width: 640mm (25”)� Noise level: 85dBA-96.2dBA� Vibration level: 7.14m/s2

� Weight: 59kg

6550 ROTAVATOR LIGHT-DUTY – PETROL

Petrol driven. One forward and one reverse gear. Ideal for landscaping.Safety lockout to prevent simultaneous engagement of digging blades andreverse gear for operator protection. Anti-vibration and adjustablehandlebars for operator comfort and safety.

SPECIFICATIONS � 8hp� Working width: 510mm (20”)� Noise level: up to 77.7dBA� Vibration level: 2.08m/s2

� Weight: 90kg

6555 ROTAVATOR 8hp HEAVY-DUTY– PETROL

LAND

SCAP

ING

64


Exc. £50.00 £20.00 £60.00 £100.00Inc. £58.75 £23.50 £70.50 £117.50


Exc. £28.00 £11.20 £33.60 £56.00Inc. £32.90 £13.16 £39.48 £65.80


Exc. £30.00 £12.00 £36.00 £60.00Inc. £35.25 £14.10 £42.30 £70.50


Exc. £60.00 £24.00 £72.00 £120.00Inc. £70.50 £28.20 £84.60 £141.00

SPECIFICATIONS � Engine size: 39cc� Power: 2.5hp (DIN)/2300W� Anti-vibration system� Tank capacity: 0.9ltr� Two-stroke engine� 50:1 fuel mix (unleaded petrol)

� Weight: 7.9kg� Vibration level: 10/5.9 m/s2 max.,

10/2.3 m/s2 idle� Noise power: 108dBA� Noise pressure: 97dBA

6600 BRUSHCUTTER – PETROL

SPECIFICATIONS � Bar size: 450mm (18”)� Engine size: 64cc� Power: 3.5kW� Electronic ignition� 3/8.058 chain� Anti-vibration system

� Two-stroke engine� Weight: 6.3kg� Vibration levels: tubular handle –

6.9m/s2, rear handle – 7.2m/s2

� Sound power: 104.3dBA� Sound pressure: 113.3dBA

6630 450mm (18”) CHAINSAW – PETROL WITH 534mm (21”) GUIDE BAR

SPECIFICATIONS � 110V and 240V models available� Bar size: 35cm� Motor size: 1800W� Power: 3.5kW� Inertia/chain brake� 3/8.050 chain

� Chain type: 092� Weight: 3.5kg� Vibration level: 13.3m/s2


6625 355mm (14”) CHAINSAW – ELECTRIC

SPECIFICATIONS � Two-stroke 22cc engine� 740W/1hp output� 56cm blade length� 1.88m/s blade speed� Double action/double sided blade� Weight: 5.2kg

� Vibration levels: rear handle –idle: 7.4m/s2, racing: 11.3m/s2

front handle – idle 4.3m/s2,racing: 9.1m/s2

� Sound power: 105dBA� Sound pressure: 95dBA� Electronic ignition� Anti-vibration system

6590 HEDGE TRIMMER – PETROL

TRIMMERSCHAINSAWS

ALWAYS WEAR PROTECTIVE CLOTHING WHEN USING CHAINSAWS

Chainsaw safety kit will be supplied as part of the hire.


Exc. £30.00 £12.00 £36.00 £60.00Inc. £41.13 £16.45 £49.35 £70.50

6570 LONG REACH 2-STROKE HEDGE TRIMMER

NEW


Exc. £40.00 £16.00 £48.00 £80.00Inc. £47.00 £18.80 £56.40 £94.00

65

LANDSCAPINGFENCING EQUIPMENT

6608 ONE MAN POST HOLE BORER – PETROL

Multi function handle – all controls integrated into a single paddedhandle, meaning the operator’s hand never leaves the machine. STIHL easy start system – Elastostart and a manual fuel pump ensureseasy jerk free starting. Closed handle frame – protects the unit whilstbeing transported, increases comfort, reduces vibration. Padding – thepadding rests against the user’s leg ensuring smooth and accurate operation.

SPECIFICATIONS� Two-stroke petrol engine� Displacement: 30.8cm3

� Power output: 1.3kW (1.8hp)� Weight: 8.2kg (without fuel and drill)� Tank capacity: 640cm3

� Max. spindle speed: 190rpm� Continuous sound level: 101dBA� Sound power level: 107dBA� Vibration at idle speed: right handle 7.9m/s2,

left handle 7.1m/s2

� Vibration at max. engine speed: right handle 7.3m/s2,left handle 9.1m/s2


Exc. £50.00 £20.00 £60.00 £100.00Inc. £58.75 £23.50 £70.50 £117.50

6610 TWO MAN POST HOLE BORER – PETROL

Change drills without tools – to change the bit simply turn the clampingring a quarter of a revolution. Gear interlock – the ability to lock the auger enables easy removal of jammed auger bits from the ground.Mobility – the handles fold together to enable easy transport.

SPECIFICATIONS� Two-stroke petrol engine� Displacement: 60.3cm3

� Power output: 3kW (4.1hp)� Weight: 25.9kg (without fuel and drill)� Tank capacity: 550cm3

� Max. spindle speed: 50rpm� Continuous sound level: 99dBA� Sound power level: 112dBA� Vibration at idle speed: right handle 2.6m/s2

left handle 2.3m/s2

� Vibration at max. engine speed: right handle 9.9m/s2

left handle 10m/s2



Exc. £14.00 £5.60 £16.80 £28.00Inc. £16.45 £6.58 £19.74 £32.90


Exc. £13.00 £5.20 £15.60 £26.00Inc. £15.28 £6.11 £18.33 £30.55


Exc. £12.00 £4.80 £14.40 £24.00Inc. £14.10 £5.64 £16.92 £28.20


Exc. £12.00 £4.80 £14.40 £24.00Inc. £14.10 £5.64 £16.92 £28.20

6612D ADDITIONAL AUGER 200mm6612 ADDITIONAL AUGER 150mm

6612E ADDITIONAL AUGER 250mm 6614 AUGER EXTENSION BAR 0.5m

LAND

SCAP

ING

66


Exc. £5.00 £2.00 £6.00 £10.00Inc. £5.88 £2.35 £7.05 £11.75


Exc. £26.00 £10.40 £31.20 £52.00Inc. £30.55 £12.22 £36.66 £61.10

FENCING EQUIPMENT

MISCELLANEOUS

Anvil lopping shears for hard to reach areas.

SPECIFICATIONS� 29” bypass and anvil length

6675 LONG REACH HAND PRUNER

� Max. airflow: 13m3 per minute� Two-stroke engine� Cubic capacity: 24.5cc� Weight: 3.8kg� Vibration level: 9.01m/s2

� Noise power: 95.7dBA� Noise pressure: 86.8dBA

6685 HAND HELD PETROL BLOWER


Exc. £9.00 £3.60 £10.80 £18.00Inc. £10.58 £4.23 £12.69 £21.15

Robust steel construction, 6” bore.


6603 HAND POST RAMMER


Exc. £9.00 £3.60 £10.80 £18.00Inc. £10.58 £4.23 £12.69 £21.15

Time saving tool for boring fence post holes. 4” bore.


6605 HAND POST HOLE BORER


Exc. £6.00 £2.40 £7.20 £12.00Inc. £7.05 £2.82 £8.46 £14.10

67

MISCELLANEOUS EQUIPM

ENTMISCELLANEOUS

PERSONAL PROTECTIVE EQUIPMENT

For clamping large work pieces during fabrication/carpentry etc. Cast iron head and slides with large thrust surfaces. High quality steel bar handle, screw and pin.

SPECIFICATIONS � Bar length: 1070mm (42”)� Capacity: 915mm (36”)

7070 915mm (36”) SASH CLAMP


Exc. £9.00 £3.60 £10.80 £18.00Inc. £10.58 £4.23 £12.69 £21.15

Single head 600mm torch.


4470 BLOW TORCH DRYING GUN – PROPANE

As well as offering the best deals for Tool Hire, Jewson offer a wide range of Personal Protective Equipment.

Tools for sale.TO

OLS F

OR SA

LE

68

69

TOOLS FOR SALE

At Jewson you’ll find a huge range of power and hand tools to buy as well as hire – all from the namesyou trust, like Makita, Paslode, Stanley, DeWalt and Bosch – and all at competitive prices. We also offer a complete range of Jewson handtools made to our own exacting standards so you can be sure that they’llbe working as hard as you are, day in, day out.

Why not call in to your local Jewson branch today and take a look for yourself?

TOOL

HIR

E BRA

NCHE

S

70

LONDON JEWSON TOOL HIRE

*OPENING SOON

BRANCH NAME ADDRESS TELEPHONE FAX BRANCH CODEBarking Platform Tool Hire, Ripple Road, Barking, Essex IG11 0SY 020 8477 9158 020 8594 8768 934Charlton Gate Platform Tool Hire, Units 1 & 2, Charlton Gate Estate,

Anchor & Hope Lane, Charlton, London SE7 7RZ 020 8269 5918 020 8269 5919 599Cricklewood Depot Approach, Cricklewood Broadway, London NW2 3DY 020 8450 5248 020 8208 0002 911Dagenham Shafter Road, off Rainham Road South, Essex RM10 8AB 020 8517 5472 020 8593 5945 944Fulham Baltic Sawmills, Carnwath Road, London SW6 3DS 020 7736 9550 020 7731 8179 453Hammersmith Trussley Road, off Hammersmith Grove, London W6 7PS 020 8741 8899 020 8741 5259 534Haringey Wightman Road, Haringey, London N4 1RD 020 8341 2727 020 8342 8459 734Hayes Platform Tool Hire, Pasadena Close, off Pump Lane,

Hayes UB3 2NQ 020 8848 6725 020 8848 6726 597Lambeth 6-12 Kennington Lane, London SE11 4LT 020 7735 1758 020 7587 1702 546Leytonstone Joseph Ray Road, off Leytonstone High Street, London E11 4RA 020 8556 9392 020 8558 4839 922Peckham Rollins Street, London SE15 1EP 020 7639 5224 020 7358 1058 501Penge Limes Avenue, Oakfield Road Industrial Estate, London SE20 8RA 020 8776 6222 020 8776 8588 735Staines Moor Lane, Middlesex TW18 4YN 01784 457654 01784 460106 533Stratford Grove Crescent Road, London E15 1BT 020 8534 3424 020 8519 8498 537Teddington Bushy Park Road, Off Sandy Lane, Middlesex TW11 0DS 020 8943 2890 020 8943 2113 539

EAST OF ENGLAND JEWSON TOOL HIREBRANCH NAME ADDRESS TELEPHONE FAX BRANCH CODEBury St Edmunds Cratfield Road, Moreton Hall Industrial Estate, Suffolk IP32 7DF 01284 767771 01284 704470 340Chipping Ongar* Greensted Road, Essex CM5 9HQ 01277 364102 01277 365399 521Cromer Stonehill Way, Holt Road, Norfolk NR27 9JW 01263 517016 01263 515468 125Dereham Greens Road, Norfolk NR20 3TG 01362 692166 01362 698046 952Diss Victoria Road, Norfolk IP22 4GQ 01379 643753 01379 640739 121Fakenham Dereham Road, Hempton, Norfolk NR21 7JX 01328 856767 01328 855621 642Flitwick Maulden Road, Bedfordshire MK45 5BT 01525 720643 01525 715066 115Harpenden 8-12 Grove Road, Hertfordshire AL5 1PY 01582 761353 01582 763213 101Hertford Foxholes Business Park, John Tate Road, Hertford SG13 7NG 01992 509728 01992 558516 109Huntingdon 33 St. Peter's Road, Cambridgeshire PE29 7DA 01480 456354 01480 451463 940Ipswich P.O. Box 13, Greyfriars Road IP1 1UP 01473 219670 01473 213715 331Kings Lynn Acer Road, Saddlebow Trading Industrial Estate, Norfolk PE34 3HN 01553 771058 01553 764189 954Leighton Buzzard Leighton Road, Bedfordshire LU7 1LA 01525 377094 01525 385381 347Luton 96a Kingsway, Bedfordshire LU1 1TT 01582 455715 01582 486364 712Maldon 12-14 Station Road, Essex CM9 4LQ 01621 858733 01621 856311 119Martlesham Beardmore Park, Martlesham, Ipswich, Suffolk IP5 3RX 01473 625347 01473 612860 641Norwich Newmarket Road, Cringleford, Norfolk NR4 6UE 01603 508118 01603 507797 118Norwich* Mason Road, Mile Cross Lane, Norwich NR6 6RR 01603 410411 01603 789031 951Royston Orchard Road Industrial Estate, Hertfordshire SG8 5HA 01763 249346 01763 245992 908St. Albans Cape Road, Fleetville, Hertfordshire AL1 5DJ 01727 845307 01727 811643 708Stowmarket PO Box 3, Newton Road, Suffolk IP14 1ER 01449 613492 01449 770318 343Waltham Abbey Bridge House Wharf, Lea Road, Essex EN9 1AZ 01992 769096 01992 788029 736Watford Queens Avenue, Hertfordshire WD18 7NW 01923 226656 01923 233488 716Westcliff-on-Sea 548-550 London Road, Essex SS0 9HS 01702 331149 01702 331160 638Wroxham Stalham Road, Norfolk NR12 8DU 01603 782237 01603 782764 323

SOUTH EAST JEWSON TOOL HIREBRANCH NAME ADDRESS TELEPHONE FAX BRANCH CODEAshford Ellingham Way, Ellingham Industrial Estate, Kent TN23 2JU 01233 650312 01233 613283 746Aylesbury Alton House Estate, Gatehouse Way, Buckinghamshire HP19 8DX 01296 399614 01296 394958 417Banbury Beaumont Road, Banbury, Oxfordshire, OX16 7RZ 01295 259427 01295 276978 674Basingstoke Bell Road, Daneshill East Industrial Estate, Hampshire RG24 8PY 01256 352815 01256 842287 399Bexhill 4 Beeching Road, East Sussex TN39 3LG 01424 819097 01424 731887 471Brasted High Street, Westerham, Kent TN16 1NG 01959 561795 01959 564666 450Brighton North Street, Portslade, East Sussex BN41 1DZ 01273 439877 01273 430917 514Canterbury Market Way, Kent CT2 7JJ 01227 763232 01227 784378 738

71

TOOL HIRE BRANCHESSOUTH EAST JEWSON TOOL HIRE

*OPENING SOON

BRANCH NAME ADDRESS TELEPHONE FAX BRANCH CODECrawley Stephenson Way, Three Bridges, Crawley, West Sussex RH10 1TN 01293 534128 01293 535824 515Croydon Platform Tool Hire, 1-1A Queensway, off Purley Way,

Croydon CR0 4BD 0208 256 9897 0208 256 9895 598Dartford London Road, Stone, Dartford, Kent DA2 6AS 01322 291674 01322 291493 507Dover Coombe Valley Road, Kent CT17 0UP 01304 204891 01304 213558 474Eastleigh Combes Sawmills, Toynbee Road, Eastleigh, Hants SO50 9DN 023 8061 4072 023 8061 1819 412Farnborough 37-39 Cove Road, Farnborough, Hampshire GU14 0EL 01252 546049 01252 546149 418Farnham Farnham Trading Estate, Farnham, Surrey GU9 9NS 01252 719113 01252 733263 651Faversham 47 The Mall, Faversham, Kent ME13 8JP 01795 530540 01795 535067 129Flitwick Maulden Road, Flitwick, Bedfordshire MK45 5BT 01525 720643 01525 715066 115Goddards Green Bensley Sawmills, Cuckfield Road, West Sussex BN6 9LG 01444 250132 01444 236992 733Guildford Walnut Tree Close, Surrey GU1 4UB 01483 302387 01483 532711 652Harpenden 8-12 Grove Road, Hertfordshire AL5 1PY 01582 761353 01582 761253 101Haslemere Stonemans Yard, Weydown Road, Surrey GU27 1DB 01428 653911 01428 651781 413Heathfield Isenhurst Sawmills, Cross in Hand, East Sussex TN21 0UB 01435 867970 01435 865377 518Hertford Foxholes Business Park, John Tate Road, Hertford SG13 7NG 01992 509728 01992 558516 109High Wycombe Bellfield Road, Buckinghamshire HP13 5HP 01494 520949 01494 436086 415Kenley The Old Quarry, 265 Godstone Road, Surrey CR8 5BP 020 8660 3495 020 8763 9445 590Leighton Buzzard Leighton Road, Bedfordshire LU7 1LA 01525 377094 01525 385381 347Letchworth Arden Press Way, Hertfordshire SG6 1HX 01462 677584 01462 675870 907Luton 96a Kingsway, Bedfordshire LU1 1TT 01582 455715 01582 486364 712Margate Unit 1, Tivoli Brooks, Tivoli Road Estate, Kent CT9 5TB 01843 224558 01843 224529 479Milton Keynes Tavistock Street, Bletchley, Milton Keynes MK2 2PJ 01908 641625 01908 270386 931New Milton Wick II Industrial Estate, Gore Road, Hants BH25 6SH 01425 627425 01425 638957 182Newbury Hambridge Road, Newbury RG14 5EA 01635 34409 01635 49914 653Newbury Pound Street, Newbury, Berks RG14 6AD 01635 42653 01635 550298 697Oxford 3 Lamarsh Road, off Botley Road, Oxford OX2 0HF 01865 243970 01865 241831 444Portsmouth 105/119 Blackfriars Road, Hampshire PO5 4LW 023 9282 3272 023 9229 1705 655Queenborough Rushenden Road, Queenborough, Isle of Sheppey, Kent ME11 5HX 01795 661005 01795 665546 803Reading 468 Basingstoke Road, Berkshire RG2 0QQ 0118 931 2803 0118 975 0395 680Redhill Unit 1 Orchard Business Centre, Peartree, Salfords, Surrey RH1 5EL 01293 822439 01293 775434 706Royston Orchard Road Industrial Estate, Hertfordshire SG8 5HA 01763 249346 01763 245992 908Sandown* Avenue Road, Isle of Wight PO36 8DY 01983 402282 01983 405381 175Southampton Nutsey Lane, Totton, Hampshire SO40 3NB 023 8086 6514 023 8087 3917 656Southampton Antelope House, Bursledon Road, Hampshire SO19 8BF 023 8043 3133 023 8068 5184 707St Albans Cape Road, Fleetville, St. Albans, Hertfordshire AL1 5DJ 01727 845307 01727 811643 708Surbiton 68 Brighton Road, Surbiton, Surrey KT6 5PP 020 8399 9855 020 8390 5255 312Walton-on-Thames 2 Terrace Road, Walton-on-Thames, Surrey KT12 2ST 01932 240992 01932 245775 538Waterlooville 344 London Road, Hampshire PO7 7SN 023 9226 5206 023 9225 1988 376Watford Queens Avenue, Hertfordshire WD18 7NW 01923 226656 01923 233488 716Winchester Moorside Road, Winnall Industrial Estate, Hampshire SO23 7SQ 01962 862872 01962 842578 398Woking Arthurs Bridge Wharf, Horsell, Surrey GU21 4NP 01483 715596 01483 763680 532

SOUTH WEST JEWSON TOOL HIREBRANCH NAME ADDRESS TELEPHONE FAX BRANCH CODEBarnstaple Severn Brethren Industrial Estate, Devon EX31 2AG 01271 345426 01271 323059 675Barnstaple Upcott Avenue, Pottington Trading Estate, Devon EX31 1NQ 01271 345891 01271 378917 807Bideford Nutaberry Works, Devon EX39 4DU 01237 478755 01237 474987 429Bournemouth 565 Wallisdown Road, Poole, Dorset BH12 5AD 01202 859346 01202 546833 704Bridgwater East Quay, Somerset TA6 4AE 01278 445945 01278 453927 763Bristol 109 Winterstoke Road, Ashton BS3 2NS 0117 963 5376 0117 963 9756 721Devizes Garden Trading Estate, London Road, Wiltshire SN10 2HL 01380 739448 01380 730314 828Exeter Kestrel Way, Sowton Industrial Estate, Devon EX2 7LA 01392 446068 01392 218519 688Exeter Marsh Barton 10-12 Marsh Green Road, Marsh Barton Trading Est., Devon EX2 8LT 01392 273082 01392 273177 439Exmouth Lower Fore Street, Devon EX8 1HX 01395 264224 01395 222420 806Gloucester 7 Woodrow Way, Bristol Road, Gloucestershire GL2 4DX 01452 508334 01452 306910 822Hayle 2 Carnsew Road, Cornwall TR27 4HU 01736 759501 01736 756886 690Highbridge Tylers End, Isleport Business Park, Somerset TA9 4JS 01278 787788 01278 787499 643Keynsham Ashmead Trading Estate, Broadmead Lane, Bristol BS34 1SA 0117 986 2185 0117 986 1836 645

TOOL

HIR

E BRA

NCHE

S

72

SOUTH WEST JEWSON TOOL HIRE

WEST MIDLANDS JEWSON TOOL HIRE

*OPENING SOON

BRANCH NAME ADDRESS TELEPHONE FAX BRANCH CODENewton Abbot Forde Road, Newton Abbot TQ12 4AD 01626 331333 01626 331024 793Newton Abbot Newton Road, Kingsteignton TQ12 3AF 01626 333481 01626 334482 700Penryn Parkengue, off Kernick Road, Cornwall TR10 9EP 01326 375344 01326 378109 730Penzance Jelbert Way, Eastern Green, Cornwall TR18 3AS 01736 365399 01736 333133 893Plymouth Sutton Road, Devon PL4 0HN 01752 221232 01752 265569 703Redruth Agar Road, Illogan Highway, Cornwall TR15 3ED 01209 213030 01209 216288 785Salisbury Hatches Lane, off Southampton Road, Wiltshire SP1 2NZ 01722 334588 01722 338017 678St Austell Manfield Way, Holmbush, Cornwall PL25 3HQ 01726 68233 01726 69245 134Stroud Fromeside Industrial Estate, Wallbridge, Stroud GL5 3JX 01453 762444 01453 756708 823Swindon Kembrey Street, Wiltshire SN2 8YR 01793 528473 01793 431625 183Taunton Priory Way, off Toneway, Somerset TA1 2BB 01823 350910 01823 322897 710Torquay Lymington Road, Devon TQ1 4AS 01803 314294 01803 322472 428Totnes Babbage Road, Devon TQ9 5XS 01803 864170 01803 866426 795Truro Unit 3 Middle Terrace, Lighterage Hill, Newham Industrial Estate,

Cornwall TR1 2ST 01872 320162 01872 222455 713Wadebridge Martyn's Yard, Cornwall PL27 6BT 01208 816520 01208 815272 135Western-Super-Mare Winterstoke Road, North Somerset BS23 3YF 01934 628121 01934 631038 811Weymouth Cumberland Drive, Dorset DT4 9TB 01305 788563 01305 761439 717Wimborne 120 Wimborne Road West, Dorset BH21 2DT 01202 842064 01202 886712 732Yeovil 30 Oxford Road, Pen Mill Trading Estate, Somerset BA21 5HR 01935 415338 01935 431826 628

BRANCH NAME ADDRESS TELEPHONE FAX BRANCH CODEBirmingham Bromford Platform Tool Hire, Units 1 & 2, Bromford Central, Bromford Lane,

Birmingham B8 2SE 0121 325 8375 0121 325 8377 595Birmingham Platform Tool Hire, 20-22 Melchett Road,Kings Norton Kings Norton Business Centre, Kings Norton, Birmingham B30 3HS 0121 415 3140 0121 415 3146 596Birmingham Stechford Station Wharf, Stechford, Birmingham, West Midlands B33 9AF 0121 783 2301 0121 789 7179 677Coventry 186 Humber Avenue, Coventry CV1 2AS 02476 630789 02476 631604 147Evesham St Richards Road, Four Pools Ind. Est., Worcestershire WR11 1AB 01386 446614 01386 765453 769Hereford Canal Wharf, Herefordshire HR1 2EB 01432 352466 01432 354097 185Nuneaton Greenmoor Road, Warwickshire CV10 7DL 024 7638 3684 024 7635 0476 722Shrewsbury Arlington Way, Featherbed Lane, Shropshire SY1 4PR 01743 440807 01743 442701 744Stafford Tilcon Avenue, Baswich Lane, Staffordshire ST18 0YJ 01785 257913 01785 256718 745Stratford-upon-Avon Wharf Road, Avon Industrial Estate, Warwickshire CV37 0AD 01789 414103 01789 299784 151Walsall Rolling Mill Street, West Midlands WS2 9EJ 01922 610477 01922 616822 715

WALES JEWSON TOOL HIREBRANCH NAME ADDRESS TELEPHONE FAX BRANCH CODEAberystwyth Glanyrafon Industrial Estate, Ceridigion SY23 3JQ 01970 625992 01970 624914 490Bangor Penlon Works, High Street, Gwynedd LL57 1PJ 01248 355353 01248 355287 500Bridgend Kingsway, Bridgend Industrial Estate, Mid-Glamorgan CF31 3YA 01656 668772 01656 669501 762Buckley Pinfold Industrial Estate, Pinfold Lane, Clwyd CH7 3PL 01244 549720 01244 548848 388Builth Wells Sawmills, Station Yard, Powys LD2 3SS 01982 553055 01982 552995 491Cardiff Eastmoors Road, Cardiff CF24 5EE 02920 488644 02920 490228 650Cardiff Platform Tool Hire, St. Catherine’s Trading Park, Rover Way,

Cardiff CF24 2RZ 02920 488275 02920 488276 594Carmarthen The Old Tin Works, Priory Street SA31 1NR 01267 231221 01267 231221 493Haverfordwest Fishguard Road, Prendergast, Pembrokeshire SA61 2PQ 01437 762924 01437 768925 495Holyhead Homebuild, Cyttir Road, Holyhead, Anglesey LL65 2PY 01407 764028 01407 769456 897Pwllheli Glandon Industrial Estate, Gwynedd LL53 5YT 01758 701616 01758 701208 505Swansea Beaufort Road, Plasmarl Ind. Est., Morriston, West Glamorgan SA6 8HQ 01792 772101 01792 781432 682Tenby The Green, Pembrokeshire SA70 8ET 01834 844691 01834 843567 499

73

TOOL HIRE BRANCHES

NORTH EAST JEWSON TOOL HIRE

NORTH WEST JEWSON TOOL HIRE

*OPENING SOON

BRANCH NAME ADDRESS TELEPHONE FAX BRANCH CODEDarlington Lingfield Sawmills, Lingfield Way, Yarm Road Industrial Estate,

Co. Durham DL1 4PZ 01325 469638 01325 361623 391Gateshead Dunston Sawmills, Flour Mill Road, Tyne and Wear NE11 9JB 0191 460 9231 0191 460 9716 240Middlesbrough Brewsdale Road, Lawson Ind. Est., North Ormesby, Cleveland TS3 6LJ 01642 245771 01642 246314 211Newcastle St Lawrence Road, St Peters, Tyne and Wear NE6 1AQ 0191 224 1906 0191 224 0017 584North Shields Narvik Way, Tyne Tunnel Trading Estate, North Shields NE29 7XJ 0191 296 1334 0191 257 6179 233Stockton-on-Tees (Norton) Junction Road, Norton, Cleveland TS19 9PB 01642 626001 01642 617710 231Sunderland Pottery Road, Low Southwick, Tyne and Wear SR5 2BP 0191 516 9219 0191 549 6987 242

BRANCH NAME ADDRESS TELEPHONE FAX BRANCH CODEBarrow-In-Furness Central Sawmills, Hibbert Road, Barrow-in-Furness LA14 5AF 01229 820108 01229 870438 326Birkenhead 300 Price Street, Merseyside CH41 3PX 0151 647 0050 0151 647 3381 327Bury Higher Mills, Bridge Street, Lancashire BL9 6HH 0161 764 6011 0161 764 8977 302Cheadle Unit 1, Earl Road, Stanley Green Ind. Est., Cheshire SK8 6PT 0161 485 8449 0161 486 6589 362Chester 142 Christleton Road, Chester, Cheshire, CH3 5TD 01244 342171 01244 323467 766Chester Knutsford Way, Sealand Industrial Estate, Cheshire CH1 4PB 01244 377888 01244 377249 328Congleton West Road, Congleton, Cheshire CW12 4HD 01260 272272 01260 298288 767Manchester (Newton Heath) Beckford Street, Newton Heath, Greater Manchester M40 5AJ 0161 202 6933 0161 203 4934 314Southport Meols Cop Bridge, Bispham Road, Merseyside PR9 7DD 01704 229847 01704 225557 308St Helens College Street, Merseyside WA10 1TU 01744 738220 01744 453921 143Stockport Greg Street, Reddish, Cheshire SK5 7NW 0161 476 4626 0161 480 7652 335Widnes Tanhouse Industrial Estate, Tanhouse Lane, Cheshire WA8 0SS 0151 420 6348 0151 420 2608 337Wigan Victoria Street, Newtown, Lancashire WN5 9BX 01942 211561 01942 216746 317

YORKS. & HUMBER JEWSON TOOL HIREBRANCH NAME ADDRESS TELEPHONE FAX BRANCH CODEHull Rotterdam Road, Sutton Fields Ind. Est., East Yorkshire HU7 0XU 01482 371428 01482 371412 150Leeds Gibralter Island Road, Old Mill Bus. Park, West Yorkshire LS10 1RJ 0113 270 2750 0113 276 0691 372Sheffield 425-453 Queens Road, Sheffield, South Yorkshire S2 4DR 0114 275 5285 0114 272 6108 128Sheffield 100 Harvest Lane, Caledonia Works, South Yorkshire S3 8EQ 0114 273 9700 0114 276 6109 383York Green Lane, Clifton YO30 5PY 01904 691446 01904 691373 381

EAST MIDLANDS JEWSON TOOL HIREBRANCH NAME ADDRESS TELEPHONE FAX BRANCH CODEDerby Alfreton Road, Derbyshire DE21 4RT 01332 349331 01332 384541 187Grantham Wharf Road, Lincolnshire NG31 6BJ 01476 571717 01476 592965 728Leicester 150 Welford Road, Leicestershire LE2 6BA 0116 254 8006 0116 255 1696 741Skegness* Albert Road, Lincolnshire PE25 3RB 01754 763238 01754 610581 154

SCOTLAND JEWSON TOOL HIREBRANCH NAME ADDRESS TELEPHONE FAX BRANCH CODEDalkeith 44-46 Millerhill, near Dalkeith, Midlothian EH22 1RZ 0131 561 9623 0131 654 2199 487Dundee 56 East Dock Street, Dundee DD1 3JZ 01382 461345 01382 457418 760Edinburgh 58 Craigentinny Avenue North EH6 7LJ 0131 553 1641 0131 554 4461 659Edinburgh 153 Slateford Road, Lothian EH14 1NZ 0131 443 0122 0131 455 7726 576Glasgow* Bearsden Road, Anniesland, Glasgow, Strathclyde G13 1EP 0141 954 8021 0141 950 1692 461Glasgow Platform Tool Hire, 190 Helen Street, Govan, Glasgow G51 3HZ 0141 445 7080 0141 445 7081 592Glasgow 127 Craighill Road, Strathclyde G4 9TP 0141 331 1430 0141 353 2771 755Kirkcaldy Smeaton Road, Fife KY1 2HA 01592 260088 01592 640012 761Paisley 10-12 Greenhill Road, Paisley, Renfrewshire PA3 2NS 0141 889 7437 0141 840 1600 467Wishaw Excelsior Street, Wishaw, North Lanarkshire ML2 7SS 01698 350429 01698 350353 468

AAccess Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-11Air Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53Alloy Towers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Auto Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

BBelt Sander . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41Biscuit Jointer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Block Pavior Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Block Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Bolt Croppers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22Breaking & Demolition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44-45Breakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44-45Brushcutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

CCable Avoiding Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51Carpet Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56Carpet Dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53Carpet Stretcher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58Cartridge Hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40Chainsaw – Masonry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Chainsaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64Chipper/Shredder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62Circuit Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48Circular Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56-57Compaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-32Concrete & Cutting Equipment . . . . . . . . . . . . . . . . . . . . .12-17Concrete Floats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Concrete Floor Saws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Concrete Mixers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Cultivator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62Cut-off Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Cutting & Chasing (concrete) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

DDamp Proof Injection Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22, 53Decorating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60Dehumidifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53Diamond Drilling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Diaphram Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49Disc Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Drain Rod Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55Drain Testing Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-35

INDE

X

74

Drying Gun – Propane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67Dust Extractors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

EEarth Moving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29-30Excavators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Extension Leads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48Extractors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

FFencing and Hoarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25Fencing Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65-66Floor Edge Sander . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42Floor Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Floor Polisher/Scrubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58Floor Sander . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42Floor Preparation (concrete) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Floor Tile Stripper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43Floorboard Cramp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58Flooring Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

GGarden Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66Generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46Grinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

HHeaters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52Heating, Drying & Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . .52-53Hedge Trimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64Hot Air Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60Hydraulic Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

JJigsaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37Junction Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

KKanga Kid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

LLadders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7Landscaping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61-66Laser – Self-levelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50Lawn Mower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61Lawn Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61Lifting & Moving Equipment . . . . . . . . . . . . . . . . . . . . . . . . .27-28Lighting & Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46-48


INDEXSafety Barriers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21Sash Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67Scaffold Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Scarifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61Screwdriver – Electric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40Shredders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62Signal Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51Site Accommodation & Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23Site Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-26Site Security Safe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22Skip Hire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Skip Loaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Skip Ramp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21Spate Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49Spot Nailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Stump Extractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62Submersible Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49Surveying Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-51Swivel Arm Hoist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

TTail Adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48Tile Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43Tile Hoist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Tiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43Toilet Hire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26Tongue and Groove Nailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58Tools for Sale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68Transformers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47Trestles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9Turf Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61Tyrannosaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Tyrolean Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

VVacuum Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56Vibrating Compactors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32Vibrating Pokers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Vibrating Screeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

WWall Chasing Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Wallpaper Stripper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60Water Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49Wheelbarrow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Worktop Jig . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

MMasonry Saws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17-18Milling Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Mini Dumper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Mitre Saws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-39Mixing Paddle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

NNailing Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-41Needle Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

OOrbital Sander . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

PPaint Sprayer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60Paint Stirrer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Pallet Truck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Personal Protective Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67Pipe Benders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54Pipe Freezing Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55Pipe Threaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54Planer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Plant Trailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Plasterboard Jack Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Plate Compactors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-32Platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Plumbing Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54-55Post Hole Borers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65-66Post Rammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66Power Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-42Powered Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Pressure Test Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55Pressure Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57Props . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19Pruner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66Puddle Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49Pumping Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

RReciprocating Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39Residue Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49Road Cone/Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21Rotavator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Rubbish Chutes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

SSack Truck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Order Code: JHP05

Jewson Limited, Merchant House, Binley Business Park, Coventry CV3 2TT

© Jewson Limited. All rights reserved. No part of this catalogue may be reproduced without prior written permission. All equipment detailed in this catalogue is subject to availability. We may offer alternative branded equipment which has met our high quality standards. Jewson has a policy of continuous improvement of our products and whilst we have endeavoured

to be as accurate as possible in the production of this catalogue, some specifications may vary slightly between brands. Whilst we have done everything we can to be as accurate aspossible in the production of this catalogue, we cannot be held responsible for any errors or omissions and customers are advised to check with our Tool Hire staff prior to ordering. Prices

in this catalogue are correct at the time of press, however Jewson reserves the right to change rates of hire and information without prior notice. All rates detailed in this catalogue are shown inclusive and exclusive of VAT which will be charged at the current rate.

FOR YOUR NEAREST TOOL HIRE BRANCH,

PLEASE USE THE DIRECTORY INSIDE,

FREEPHONE 0800 539766, OR VISIT www.jewson.co.uk

Date post:	09-Mar-2015
Category:	Documents
Upload:	treazerjetaime
View:	336 times
Download:	0 times

ToolHire_2005

Documents