Page 1 of 55

(TOOLING DIVISION)

Page 2 of 55

Preface

Cutting tools play a very important role in quality and productivity of the machined components. The incoming inspection of cutting tools generally consists of only dimensional measurements. Metallurgical tests are very rarely carried out. In fewer cases trials are carried out, since this is practically not possible in most cases due to constraints in user shop. The constraints are due to different job being processed on the machine at the time and non-availability of same tool from other vendor for comparison of life and cutting parameters. There are no prescribed tests for carbide inserts other than dimensional measurements and trials. Under these circumstances it becomes essential to prescribe a list of approved manufacturers and brands to exercise control in the incoming quality of tools. The vendor directory has been prepared based on feed back from users, reports, comparative trials and in few cases reputed brands/manufacturer have been picked up.

The vendor directory has a listing of tool type families and certain specific critical tools. The approval of manufacturers has been done based on their capability in terms of machinery & plant for the particular category of items and credentials of firms in manufacturing these items. In such cases where manufacturer does not deal directly with DLW, the vendor who is either authorized dealer or supplier of such brand has been included in the vendor directory.

Vendors must be aware that Indian Railways have launched E-Procurement System (IREPS) and DLW is one of the organizations to upload the tenders on the newly developed portal http://ireps.gov.in. Most of the tenders of DLW have been uploaded on this portal since December 2009. Thereafter manual tendering is being discontinued and has soon been planned for complete ban.

Therefore, it is necessary that approved vendors are registered user of IREPS. A class III-B digital signature certificate is pre-requisite for registration at IREPS. This certificate can be obtained from any of the license certifying agencies whose addresses are available on the website. Vendors are advised to visit the websitehttp://ireps.gov.in and get their firm registered on the website online and be fully acquainted with the above system.

Henceforth, IREPS registration of vendors is mandatory for any renewal/fresh approval for any item in DLW Tooling Vendor Directory.

Efforts are still on to explore new and better vendors for all such items where there are not enough developed sources.

This vendor directory is issued with due approval of Dy, CMM/M&P, CMM/HQ & CME/Plant.

Page 3 of 55

INDEX

Main Group Code

Sub Group code

Description of Tooling Items Page No.

A Abrasives & related productsA01 Abrasives belts, Rolls & polishing tools 7 A02 Grinding wheels (Al2O3 & SiC) Standard 7 A03 Grinding Wheels (non standard & for low quantity) 7 A04 Mounted point wheels 8 A05 Abrasive honing sticks 8 A06 Honing tool assembly 8 A07 Diamond honing sticks 8 A08 Diamond wheels 9 A09 CBN wheels 9 A10 Diamond dressers 9

B Band Saw, Hack saw blades, slitting sawB01 Band Saw Blades Bi Metal 9 B02 Band Saw Blades (Indigenous) 10 B03 Hack Saw blades 10 B04 Slitting Saw 10

C Drills (HSS, Carbide, Inserted) C01 Twist Drills (HSS) upto 1” 10 C02 Twist Drills (HSS) Above 1” 11 C03 High quality twist drills (HSS) 11 C04 Drills, Core & Slot (HSS) 11 C05 Center Drills (HSS) 11 C06 Drills (Twist) Solid carbide drills + center drills 11 C07 Inserted Drills & drill kits (Two or more inserts) 12 C08 Inserted Drills & drill kits (single form insert type) 12 C09 Gun Drills 12

D Reamers (HSS, Carbide, inserted)D01 Reamers HSS high performance 12 D02 Reamers HSS 12 D03 Reamers Solid carbide 13

E End Mills (HSS, Solid carbide, Insert type) E01 End mill cutters (HSS) 13 E02 End mill cutters (Solid carbide type) 13 E03 End mill cutters (Insert type) 13 E04 Carbide Rotary burrs 14

Page 4 of 55

F Milling cutters & sparesF01 Cutter blades (HSS) 14 F02 Cutter Blades (Super HSS) 14 F03 Cutter Blades (Brazed carbide) 14 F04 Cutter Brazed 14 F05 Cutter (HSS to DLW specification) 15 F06 Cutter Side & Face (HSS) High end 15 F07 Inserted milling cutters & kits 15 F08 Uncoated milling inserts 15 F09 Coated milling inserts 16 F10 Inserted cutters special to DLW drawing 16 F11 Inserted cutter spares 16

G Boring tools (HSS, inserted etc) G01 Boring bars inserted type (turning) 16 G02 Boring bars inserted type (Rotatory) 17 G03 Micro fine boring bars 17 G04 Micro boring cartridges/tools (inserted type) 17 G05 MICRO Boring cartridges (Drg .no.TH04AL0018) 17 G06 CC Boring tool Drg No. ET/B/1060-- 18 G07 Boring Bars, Tool Holders (Special to DLW drawing) 18 18

H Turning Tools (HSS, Carbide) H01 Single point tools (HSS) 18 H02 Carbide Tools brazed (Single point) 18 H03 Tool bits (HSS) 18 H04 Carbide tips uncoated 19 H05 Tool Holders (Insert type) kits 19 H06 Turning inserts kits 19 H07 Turning inserts uncoated 19 H08 Turning inserts coated 20 H09 OK Tools (carbide tipped) 20 H10 OK Tools (HSS) 20 H11 CBN, Ceramic, cermet inserts 20 H12 Grooving Insert Kit 20 H13 Parting Insert Kit 21

J Spares for cutter & holders of Inserted type J01 Screws (Insert, Clamp & Cartridge) 21 J02 Kit of spares, Shims 21

K Threading Tools K01 Chasers 21 K02 Thread Rolls 22 K03 Threading holders & inserts including kits 22 K04 Taps (straight flute) 22 K05 Taps (Helical flute) 22

Page 5 of 55

K06 Taps (High Performance) 23 K07 Solid Carbide taps 23

L Form & Profile Tools (HSS) L01 Gear hob 23 L02 Gear shavers 23 L03 Broaches 23 L04 Burnishing tools 23 L05 Serration cutter (TM-37) 24 L06 Serration cutter 95 mm 24 L07 HSS Interlocking cutter TM-41 24

M Dies, punches & shearing blades M01 Dies & Punches 24 M02 Dies & Punches (for CNC turret punch press) 24 M03 Shear blades 25

N Cutting Tool accessories & ConsumablesN01 Standard Rotating adapters 25 N02 Rotating adapters Old type (H. Milling arbors) 25 N03 Tapping chucks, Tap adapters 25 N04 VDI Holders 26 N05 VDI Live holders 26 N06 Drill chucks 26 N07 Sleeves 26 N08 Cutting oil (water based) 26 N09 Cutting oil (neat oils) 27 N10 Filter paper 27

P Tool Materials P01 Bronze Rod & Bronze bushes 27 P02 Solid carbide bars, flats & tips 27 P03 Cermet, ceramic bars, flats 28 P04 HSS & Die steels 28 P05 Alloy steels & spring steels 28

Q Jigs, Fixtures, templates & gages Q01 Fixtures (fabrication, welding) 28 Q02 Fixtures (machining) 29 Q03 Inspection Fixtures & gauges 29 Q04 Jigs 29 Q05 Templates 29 Q06 Thread gages (Go No Go) 30 Q07 Plug & Ring gages (Go No Go) 30 Q08 Work Basket, Wire-Mesh, Spacing –Grid, Lifting-Fixture. 30

Page 6 of 55

R Measuring Instruments R01 Dial Indicators 30 R02 Dial Bore gages 31 R03 Micrometers O/S, I/S, Tube, Pitch, Try Point 31 R04 Vernier Scale, Depth, Height Gauges 31

S Hand Tools & Power Tools S01 Garage tools & Hand tools 32 S02 Pneumatic tools 32 S03 Pneumatic tool spare 32 S04 Tube expanders 32 S05 Electric hand tools 33 S06 Electrical cable crimping dies & equipments 33 33

T Work Holding Machine Tool accessories T01 Chucks manual (Low end) 33 T02 Chucks manual (High end) 33 T03 Chucks Power 34 T04 Jaws as per DLW drg 34 T05 Centers (revolving & fixed) 34 T06 Rotary tables & dividing heads 34

U Lifting, Clamping & Fixing accessories U01 Vices 35 U02 Crane Hooks, eye bolts & nuts 35 U03 Toggle clamps 35 U04 Fasteners 35 U05 V-blocks & clamps 36 U06 Magnetic plates & magnetic V-blocks, Magnetic dial holders 36 U07 T-bolts & clamps & jacks 36 U08 Pneumatic / Hydraulic Swing clamps 36

V Hydraulic & pneumatic equipments V01 Hydraulic equipments & fittings, Hoses, Couplings, cylinders &

Valves 37

V02 Pneumatic accessories & fittings 37 Vendor’s Address - 38- 55

Page 7 of 55

MAIN GROUP –‘A’ - Abrasives & related products

SUB GROUP NO. A01 - ABRASIVE BELTS, ROLLS & POLISHING TOOLS Brands- CUMI, GNL, IMEXSU, Beartex, Birla 3M

S.NO. Name 1. Carborundum Universal Ltd., New Delhi (OEM) 2. Emprise Marketting, Lucknow (Birla 3M ) 3. Grind Master machines Pvt. Ltd, Aurangabad (OEM) 4. Grindwell Norton Ltd, Lucknow(OEM) 5. IMEXSU (INDIA), Mumbai(OEM) 6. Bull’s Eye Company(for GNL brand) 7. Verma Enterprises, Delhi ( For CUMI- Make)

SUB GROUP NO. A02-- GRINDING WHEELS (Al2O3 & SiC) Standard Brands- CUMI, GNL, Sterling abrasives,

SUB GROUP NO. A03-- GRINDING WHEELS (Non standard & for low quantity)

(This group shall be applicable when quantity is low & wheel is not of standard design. The MOQ of reputed makes like CUMI & GNL is not met)

S.NO. NAME 1. Carborundum Universal Ltd., New Delhi(OEM) 2. Grindwell Norton Ltd, Lucknow (OEM) 3. Sterling Abrasive Ltd., Ahmedabad(OEM) 4. Verma Enterprise, Delhi (for CUMI brand only) 5. Bull’s Eye Company(for GNL brand) 6. Anand Hardware & Tools Co., Kolkata (for GNL)

S.NO. NAME 1. Carborundum Universal Ltd., New Delhi(OEM) 2. Grindwell Norton Ltd, Lucknow (OEM) 3. Sterling Abrasive Ltd., Ahmedabad(OEM) 4. Verma Enterprise, Delhi (for CUMI brand only) 5. Bull’s Eye Company(for GNL brand) 6. Anand Hardware & Tools Co., Kolkata (for GNL)

Page 8 of 55

SUB GROUP NO. A04—Mounted point wheels Brands- CUMI, GNL, Sterling abrasives

(In case there is no offer for these brands the offer shall be acceptable for local makes)

S.NO. NAME 1. Carborundum Universal Ltd., New Delhi(OEM) 2. Grindwell Norton Ltd, Lucknow (OEM) 3. Sterling Abrasive Ltd., Ahmedabad(OEM) 4. Verma Enterprise, Delhi (for CUMI brand only) 5. Bull’s Eye Company (for GNL brand) 6. Anand Hardware & Tools Co., Kolkata (for GNL)

SUB GROUP NO. A05 -- ABRASIVE HONING STICK

S.NO. NAME 1. Carborundum Universal Ltd., New Delhi(OEM) 2. Grindwell Norton Ltd, Lucknow (OEM) 3. Sterling Abrasive Ltd., Ahmadabad(OEM) 4. Verma Enterprise, Delhi (for CUMI brand only) 5. Bull’s Eye Company (for GNL brand) 6. Anand Hardware & Tools Co., Kolkata (for GNL)

SUB GROUP NO. A06 -- HONING Tool assembly (PL no. 70980548)

S.NO. NAME 1. Anand Chemical, Kolkata 2. Verma Enterprises, Delhi 3. Shiv Hardware & Mill Store, Varanasi

SUB GROUP NO. A07 -- DIAMOND HONING STICK

S.NO. NAME 1. Eastern Diamond Products (P) Ltd., Kolkata (OEM) 2. L.M. Van Moppes Diamond Tools (I), Chennai(OEM) 3. Grindwell Norton Ltd, Lucknow(OEM) 4. Anisen Diamond Products, Chennai(OEM) 5. Bull’s Eye Company (for GNL brand)

Page 9 of 55

SUB GROUP NO. A08 -- DIAMOND WHEELS

S.NO. NAME 1. Eastern Diamond Products (P) Ltd., Kolkata (OEM) 2. L.M. Van Moppes Diamond Tools (I), Chennai(OEM)

3. Grindwell Norton Ltd, Kanpur(OEM) 4. Wendt (India) Ltd, Hosur(OEM) 5. Diamond Boart, Chennai(OEM) 6. Bull’s Eye Company (for GNL brand)

SUB GROUP NO. A09 -- CBN WHEELS

S.NO. NAME 1. Eastern Diamond Products (P) Ltd., Kolkata (OEM) 2. L.M. Van Moppes Diamond Tools (I), Chennai(OEM)

3. Grindwell Norton Ltd, Kanpur(OEM) 4. Wendt (India) Ltd, Hosur(OEM) 5. Diamond Boart, Chennai(OEM) 6. Bull’s Eye Company (for GNL brand)

SUB GROUP NO. A10 -- DIAMOND DRESSERS

S.NO. NAME 1. Eastern Diamond Products (P) Ltd., Kolkata(OEM) 2. L.M. Van Moppes Diamond Tools (I), Chennai(OEM) 3. J.K. Engineering (Diamond Works), Mumbai(OEM) 4. Grindwell Norton Ltd, Lucknow (OEM) 5. Bull’s Eye Company (for GNL brand)

MAIN GROUP –‘B’ - Band Saw, Hack saw blades, Slitting saw

SUB GROUP NO. B01 -- BAND SAW BLADES Bimetal Brands - Amada, Starrett, Bahco(Snap on),Ultra-France

Applicable for Bimetal Band saw

S.NO. NAME 1. Tools & Tools (India) , Kolkata (Snap-on) 2. Hind Associates, Kolkata (Amada) 3. D.B. Shah & Brothers Kolkata (Starrett) 4. Meru Infrastructure (p) Ltd.,Varanasi (Starrett) 5. C. H. Lee, Kolkata (Ultra-France)

Page 10 of 55

SUB GROUP NO. B02 - BAND SAW BLADES Brands – Amada ,Bipico, Starrett, Ultra-France

S.NO. NAME 1. Lenox India Pvt Ltd, Ankleshwar(OEM) 2. Bipico Industries (Tools) Pvt. Ltd., Mumbai(OEM) 3. Niran Tools & Machinery, Mumbai (Wikus-make) (OEM) 4. Meru Infrastructure (p) Ltd.,Varanasi (Starrett) 5. C. H. Lee, Kolkata(Ultra-France)

SUB GROUP NO. B03 -- HACKSAW BLADES Brand - Starrett, Bipico, Magicut, Snap-on

S.NO. NAME 1. Forbes Gokak Ltd., Mumbai (OEM) 2. Lenox India Pvt Ltd, Ankleshwar(OEM) 3. Bipico Industries (Tools) Pvt. Ltd., Mumbai(OEM) 4. Tools & Tools (India) , Kolkata(Snap-on) 5. D.B. Shah & Brothers, Kolkata(Starrett) 6. Ravi Supply Agency, Kolkata( Magicut) 7. Meru Infrastructure (p) Ltd.,Varanasi (Starrett)

SUB GROUP NO. B04 -- SLITTING SAW

S.NO. NAME 1. Motherson Advanced Tooling Solutions Ltd., Thane(OEM)

2. D.B. Engineering (P) Ltd, New Delhi (OEM) 3. Micron Engg. Industries, Kolkata. (OEM) 4. Ravi Supply Agency, Kolkata (for Steeledge) 5. Addison & Co. Ltd., Chennai(OEM)

MAIN GROUP –‘C’ - Drills (HSS, Carbide, Inserted)

SUB GROUP NO. C01-- DRILLS (TWIST) HSS (upto 1”)

S.NO. NAME 1. Birla Precision Technologies Limited, Kolkata (OEM) 2. YG-1 Industries India Pvt Ltd, Mumbai (OEM) 3. Associated Technologies, Kanpur (for RUKO brand)4. Ashoka Suppliers, Varanasi(For Hittco make) 5. Addison & Co. Ltd., Chennai(OEM)

Page 11 of 55

SUB GROUP NO. C02-- DRILLS (TWIST) HSS (Above 1”)

S.NO. NAME 1. Birla Precision Technologies Limited, Kolkata (OEM) 2. Walter Tools India Pvt. Ltd., Pune (OEM) 3. YG-1 Industries India Pvt Ltd, Mumbai (OEM) 4. Associated Technologies, Kanpur (for RUKO brand)5. Addison & Co. Ltd., Chennai(OEM)

SUB GROUP NO. C03—High quality drills (HSS) Only in cases where other drill are not performing (Titex, Guhring, YG-1)

S.NO. NAME 1. Walter Tools India Pvt. Ltd., Pune (OEM) 2. Frontier Toolings, Kanpur (for YG-1 brand) 3. Guhring India Pvt Ltd, Bangalore (OEM) 4. YG-1 Industries India Pvt Ltd, Mumbai (OEM)

SUB GROUP NO. C04 - DRILLS CORE & SLOT (HSS) (Low end performance, when due to special design & less quantity reputed make

Addison, Zenith do not quote) S.NO. NAME

1. Birla Precision Technologies Limited, Kolkata (OEM) 2. Binode Tools Corporation, Kolkata (OEM) 3. Ashoka Suppliers, Varanasi (For Hittco make) 4. Addison & Co. Ltd., Chennai(OEM)

SUB GROUP NO. C05 – Centre Drill (HSS)

S.NO. NAME 1. Birla Precision Technologies Limited,Kolkata (OEM) 2. YG-1 Industries India Pvt Ltd, Mumbai (OEM) 3. Micron Engg. Industries, Kolkata. (OEM) 4. Ashoka Suppliers, Varanasi(For Hittco make) 5. Addison & Co. Ltd., Chennai(OEM)

SUB GROUP NO. C06-- DRILLS (TWIST) Solid carbide type+ Carbide Center Drills

S.NO. NAME 1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Forbes Gokak Ltd, Mumbai (OEM) 4. Sagar Associates, Kanpur(Prime Precision-Make)5. YG-1 Industries India Pvt Ltd, Mumbai (OEM) 6. Walter Tools India Pvt. Ltd., Pune (OEM). 7. Addison & Co. Ltd., Chennai(OEM) 8. Kaushiv Associates,Varanasi (WIDIA-Make)

Page 12 of 55

SUB GROUP NO. C07—Inserted drills & Drill kits (two or more inserts)

S.NO. NAME 1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Seco Tools India (P)Ltd, New Delhi(OEM) 4. Sandvik Asia Ltd, Pune

5. Walter Tools India Pvt. Ltd., Pune (OEM). 6. Sagar Associates, Kanpur (ISCAR) 7. Bharat Enterprises, Kanpur(for SECO make) 8. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)

SUB GROUP NO. C08—Inserted drills & Drill kits (Single insert type) S.NO. NAME

1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM)

3. Seco Tools India (P)Ltd, New Delhi(OEM) 4. Guhring India Pvt Ltd, Bangalore (OEM) 5. YG-1 Industries India Pvt Ltd, Mumbai (OEM) 6. Walter Tools India Pvt.Ltd.Pune

SUB GROUP NO. C09 -- GUN DRILLS S.NO. NAME

1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)4. Sagar Associates, Kanpur (Iscar)

MAIN GROUP –‘D’ - Reamers (HSS, Carbide, inserted)

SUB GROUP NO. D01 – REAMER (HSS) High Performance S.NO. NAME

1. Birla Precision Technologies Limited, Kolkata(OEM) 2. YG-1 Industries India Pvt Ltd, Mumbai (OEM) 3. Addison & Co. Ltd., Chennai(OEM)

SUB GROUP NO. D02 – REAMER (HSS) S.NO. NAME

1. Birla Precision Technologies Limited,Kolkata (OEM) 2. YG-1 Industries India Pvt Ltd, Mumbai (OEM) 3. Binode Tools Corporation, Kolkata (OEM) 4. Ravi Supply Agency, Kolkata (for Steeledge) 5. Addison & Co. Ltd., Chennai(OEM)

Page 13 of 55

SUB GROUP NO. D03 – REAMER Solid carbide

S.NO. NAME 1. Forbes Gokak Ltd., Mumbai (OEM) 2. Sagar Associates, Kanpur(Prime Precision-Make) 3. Kepro Tools & Equipment Pvt Ltd, Kolkata 4. YG-1 Industries India Pvt Ltd, Mumbai (OEM) 5. Addison & Co. Ltd., Chennai(OEM)

MAIN GROUP –‘E’ - End Mills (HSS, Solid carbide, Insert type)

SUB GROUP NO. E01 -- END MILL CUTTERS (H.S.S)

S.NO. NAME 1. Birla Precision Technologies Limited, Kolkata(OEM) 2. Micron Engg. Industries, Kolkata. (OEM) 3. Sigma Industries,Faridabad. (OEM) 4. Ravi Supply Agency, Kolkata (Steeledge make) 5. Associated Technologies, Kanpur (for RUKO brand)6. Addison & Co. Ltd., Chennai(OEM)

SUB GROUP NO. E02 -- END MILL CUTTERS (Solid carbide type)

S.NO. NAME 1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Forbes Gokak Ltd, Mumbai (OEM) 4. Sagar Associates, Kanpur(Prime Precision-Make) 5. YG-1 Industries India Pvt Ltd, Mumbai (OEM) 6. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)7. Addison & Co. Ltd., Chennai(OEM)

SUB GROUP NO. E03 -- END MILL CUTTERS (Insert type)

S.NO. NAME 1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Bharat Enterprises, Kanpur(for SECO make) 4. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)5. Sagar Associates, Kanpur (ISCAR)

Page 14 of 55

SUB GROUP NO. E04 -- CARBIDE ROTARY BURRS

S.NO. NAME 1. Forbes Gokak Ltd., Mumbai (OEM) 2. Shiballoy Multiflex Pvt Ltd, Bhubaneshwar (OEM) 3. YG-1 Industries India Pvt Ltd, Mumbai (OEM)

MAIN GROUP –‘F’ - Milling cutters & spares

SUB GROUP NO. F01 – Cutter BLADES (H.S.S.)

S.NO. NAME 1. Dies & Tools Ltd., Kolkata (OEM) 2. Essem Tools & Component Mfg. Co., Hyderabad (OEM) 3. Aditya Tools Pvt Ltd, Kolkata (OEM) 4. Sigma Industries,Faridabad. (OEM) 5. Ravi Supply Agency, Kolkata

SUB GROUP NO. F02 – Cutter BLADES (Super H.S.S.)

S.NO. NAME 1. Dies & Tools Ltd., Kolkata (OEM) 2. Essem Tools & Component Mfg. Co., Hyderabad (OEM) 3. Sigma Industries,Faridabad. (OEM)

SUB GROUP NO. F03 – Cutter BLADES (Brazed carbide)

S.NO. NAME 1. Dies & Tools Ltd., Kolkata (OEM) 2. Essem Tools & Component Mfg. Co., Hyderabad (OEM) 3. Sigma Industries,Faridabad. (OEM) 4. Ravi Supply Agency, Kolkata

SUB GROUP NO. F04 -- CUTTER BRAZED

S.NO. NAME 1. Dies & Tools Ltd., Kolkata (OEM) 2. Essem Tools & Component Mfg. Co., Hyderabad (OEM) 3. G.B. Tools & Accessories, Kolkata(OEM) 4. Sigma Industries,Faridabad. (OEM) 5. Ravi Supply Agency, Kolkata

Page 15 of 55

SUB GROUP NO. F05-- CUTTERS (H.S.S.) TO DLW SPECIFICATION

S.NO. NAME 1. Dies & Tools Ltd., Kolkata (OEM) 2. Birla Precision Technologies Limited,Kolkata (OEM) 3. Ravi Supply Agency, Kolkata (for Steeledge) 4. Addison & Co. Ltd., Chennai(OEM)

SUB GROUP NO. F06-- CUTTERS Side & Face (H.S.S.) High end

S.NO. NAME 1. Dies & Tools Ltd., Kolkata (OEM) 2. Birla Precision Technologies Limited,Kolkata (OEM) 3. Walter Tools India Pvt. Ltd., Pune (OEM) 4. Addison & Co. Ltd., Chennai(OEM)

SUB GROUP NO. F07—Inserted milling cutters & Kits

SUB GROUP NO. F08 – Uncoated milling inserts

S.NO. NAME 1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Seco Tools India (P)Ltd, New Delhi(OEM) 4. Walter Tools India Pvt. Ltd., Pune (OEM). 5. Bharat Enterprises, Kanpur(for SECO make) 6. Sagar Associates, Kanpur (ISCAR) 7. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)

S.NO. NAME 1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Walter Tools India Pvt. Ltd., Pune (OEM) 4. Seco Tools India (P)Ltd, New Delhi(OEM) 5. Bharat Enterprises, Kanpur(for SECO make) 6. Total Solutions, Kanpur (Mitshubishi) 7. Sagar Associates, Kanpur (ISCAR) 8. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)

Page 16 of 55

SUB GROUP NO. F09—Coated milling inserts

S.NO. NAME 1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Seco Tools India (P)Ltd, New Delhi(OEM) 4. Walter Tools India Pvt. Ltd., Pune (OEM). 5. Bharat Enterprises, Kanpur(for SECO make) 6. Total Solutions, Kanpur (for Mitshubishi) 7. Sagar Associates, Kanpur (ISCAR) 8. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)

SUB GROUP NO. F10—Inserted cutters special to DLW drawing

SUB GROUP NO. F11 – Inserted cutter spares

S.NO. NAME 1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Seco Tools India (P)Ltd, New Delhi(OEM) 4. Walter Tools India Pvt. Ltd., Pune (OEM). 5. Bharat Enterprises, Kanpur(for SECO make) 6 Associated Technologies, Kanpur(Multi-Tech) 7 Ashoka Suppliers,Varanasi(For Ceratizit make)

MAIN GROUP –‘G’ - Boring tools (HSS, inserted etc)SUB GROUP NO. G01 – BORING BARS inserted type (turning)

S.NO. NAME 1. Kennametal India Limited, Bangalore (OEM) 2. Bharat Enterprises, Kanpur (for SECO make) 3. Taegutec India Pvt Ltd, Bangalore (OEM) 4. Seco Tools India (P)Ltd, New Delhi (OEM) 5. Walter Tools India Pvt. Ltd., Pune (OEM). 6. Sagar Associates, Kanpur (ISCAR) 7. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)

S.NO. NAME 1. Kennametal India Limited, Bangalore (OEM) 2. Seco Tools India (P)Ltd, New Delhi(OEM) 3. Taegutec India Pvt Ltd, Bangalore (OEM) 4. Bharat Enterprises, Kanpur(for SECO make) 5. Associated Technologies, Kanpur (KORLOY-Make)6. Sagar Associates, Kanpur (ISCAR) 7. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)8. Kaushiv Associates,Varanasi (WIDIA-Make)

Page 17 of 55

SUB GROUP NO. G02 – BORING BARS inserted type (Rotatory)

SUB GROUP NO. G03 – Micro Fine BORING BARS

SUB GROUP NO. G04 – MICRO Boring cartridges/Tools (Inserted type)

S.NO. NAME 1. Seco Tools India (P)Ltd, New Delhi(OEM) 2. Hoshi Tools, Bangalore(OEM) 3. Kennametal India Limited, Bangalore (OEM) 4. Taegutec India Pvt Ltd, Bangalore (OEM) 5. Bharat Enterprises, Kanpur(for SECO make) 6. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)7. Sagar Associates, Kanpur (ISCAR) 8. Kaushiv Associates,Varanasi (WIDIA-Make)

SUB GROUP NO. G05 – MICRO Boring cartridges (Drg .no.TH04AL0018)

S.NO. NAME 1. G.B. Tools & Accessories, Kolkata (OEM) 2. Dies & Tools Ltd. , Kolkata(OEM) 3. Hoshi Tools, Bangalore(OEM) 4. Kepro Tools & Equipments Pvt Ltd, Kolkata(OEM) 5. Precision Tooling System Ltd, Dharwad(OEM) 6. Techno Qualities, Kanpur (for Naga brand)

S.NO. NAME 1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Seco Tools India (P)Ltd, New Delhi(OEM) 4. Bharat Enterprises, Kanpur(for SECO make) 5. Associated Technologies, Kanpur (KORLOY-Make)6. Ashoka Suppliers,Varanasi(For Ceratizit make) 7. Sagar Associates, Kanpur (ISCAR) 8. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)9. Kaushiv Associates,Varanasi (WIDIA-Make)

S.NO. NAME 1 Kennametal India Limited, Bangalore (OEM) 2 Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)3 Vibha Technologies Ltd, Bangalore (Rigibore)

Page 18 of 55

SUB GROUP NO.G06 –C.C. Boring Tool Drg. No.-ET/B/1060/--

S.NO. NAME 1. Taegutec India Pvt Ltd., Bangalore(OEM) 2. Kennametal India Limited, Bangalore (OEM) 3. Forbes Gokak Ltd, Mumbai (OEM) 4. Kepro Tools & Equipments Pvt Ltd, Kolkata(OEM) 5. Ashoka Suppliers,Varanasi(For Ceratizit make)

SUB GROUP NO. G07 – BORING BARS , TOOL HOLDERS (SPECIAL TO DLW DRAWING) (without throwaway insert pocket)

S.NO. NAME 1. Dies & Tools Ltd., Kolkata (OEM) 2. B.M. Small Industries, Kolkata(OEM) 3. Kepro Tools & Equipments Pvt Ltd, Kolkata(OEM) 4. G. V. Enterprises, Faridabad(OEM) 5. Techno Qualities, Kanpur (for Naga brand)

MAIN GROUP –‘H’ – Turning Tools (HSS, Carbide)

SUB GROUP NO. H01 – SINGLE POINT TOOLS (HSS) S.NO. NAME

1. Dies & Tools Ltd., Kolkata (OEM) 2. Essem Tools & Component Mfg. Co., Hyderabad (OEM) 3. Sigma Industries, Fridabad(OEM) 4. Kepro Tools & Equipments Pvt Ltd, Kolkata(OEM) 5. Ravi Supply Agency, Kolkata (for Steeledge)

SUB GROUP NO. H02 – CARBIDE TOOLS BRAZED (Single Point)

S.NO. NAME 1. Dies & Tools Ltd., Kolkata (OEM) 2. Essem Tools & Component Mfg. Co., Hyderabad (OEM) 3. Kepro Tools & Equipments Pvt Ltd, Kolkata(OEM) 4. Ravi Supply Agency, Kolkata (for Steeledge)

SUB GROUP NO. H03 – TOOL BITS (H.S.S.) S.NO. NAME

1. Dies & Tools Ltd. , Kolkata(OEM) 2. Forbes Gokak Ltd., Mumbai (OEM) 3. Birla Precision Technologies Limited,Kolkata (OEM) 4. Addison & Co. Ltd. , Kolkata (OEM)

Page 19 of 55

SUB GROUP NO. H04 – Carbide tip Uncoated S.NO. NAME

1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Rapicut Carbide Ltd, Ankleshwar(OEM) 4. Bharat Enterprises, Kanpur(for SECO make) 5. Ashoka Suppliers,Varanasi(For Ceratizit make) 6. Sagar Associates, Kanpur (ISCAR) 7. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)

SUB GROUP NO. H05 – Tool Holders (Insert type) S.NO. NAME

1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Seco Tools India (P)Ltd, New Delhi(OEM) 4. Bharat Enterprises, Kanpur(for SECO make) 5. Ashoka Suppliers,Varanasi(For Ceratizit make) 6. Total Solutions, Kanpur (Mitsubisi) 7. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)8. Sagar Associates, Kanpur (ISCAR) 9. Kaushiv Associates,Varanasi (WIDIA-Make)

SUB GROUP NO. H06 – Turning inserted kits S.NO. NAME

1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Seco Tools India (P)Ltd, New Delhi(OEM) 4. Bharat Enterprises, Kanpur(for SECO make) 5. Total Solutions, Kanpur (Mitsubisi) 6. Ashoka Suppliers,Varanasi(For Ceratizit make) 7. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)8. Sagar Associates, Kanpur (ISCAR) 9. Associated Technologies, Kanpur (KORLOY-Make)10. Kaushiv Associates,Varanasi (WIDIA-Make)

SUB GROUP NO. H07 – Turning inserts uncoated S.NO. NAME

1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Seco Tools India (P)Ltd, New Delhi(OEM) 4. Bharat Enterprises, Kanpur(for SECO make) 5. Total Solutions, Kanpur (Mitsubisi) 6. Ashoka Suppliers,Varanasi(For Ceratizit make) 7. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)8. Sagar Associates, Kanpur (ISCAR) 9. Associated Technologies, Kanpur (KORLOY-Make)

Page 20 of 55

SUB GROUP NO. H08 – Turning inserts coated S.NO. NAME

1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Seco Tools India (P)Ltd, New Delhi(OEM) 4. Bharat Enterprises, Kanpur(for SECO make) 5. Total Solutions, Kanpur (Mitsubisi) 6. Ashoka Suppliers,Varanasi(For Ceratizit make) 7. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)8. Sagar Associates, Kanpur (ISCAR) 9. Associated Technologies, Kanpur (KORLOY-Make)10. Kaushiv Associates,Varanasi (WIDIA-Make)

SUB GROUP NO. H09 – OK Tools (Carbide tips)

S.NO. NAME 1. Dies & Tools Ltd. , Kolkata(OEM) 2. Sagar Associates, Kanpur(Prime Precision-Make)3. Essem Tools & Component Mfg. Co., Hyderabad (OEM)

SUB GROUP NO. H10 – OK TOOLS (HSS) S.NO. NAME

1. Dies & Tools Ltd. , Kolkata(OEM) 2. Aditya Tools Pvt. Ltd. , Kolkata(OEM) 3. Essem Tools & Component Mfg. Co., Hyderabad (OEM) 4. Micron Engg. Industries, Kolkata. (OEM)

SUB GROUP NO. H11 – CBN, Ceramic, Cermet inserts S.NO. NAME

1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Seco Tools India (P)Ltd, New Delhi(OEM) 4. Bharat Enterprises, Kanpur(for SECO make) 5. Associated Technologies, Kanpur (for NTK brand)6. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)7. Sagar Associates, Kanpur (ISCAR)

SUB GROUP NO. H12 – Grooving Insert Kits S.NO. NAME

1. Taegutec India Pvt Ltd, Bangalore (OEM) 2. Seco Tools India (P)Ltd, New Delhi(OEM) 3. Bharat Enterprises, Kanpur(for SECO make) 4. Total Solutions, Kanpur (Mitsubisi) 5. Ashoka Suppliers,Varanasi(For Ceratizit make) 6. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)7. Sagar Associates, Kanpur (ISCAR)

Page 21 of 55

SUB GROUP NO. H13 – Parting Insert Kits

S.NO. NAME 1. Taegutec India Pvt Ltd, Bangalore (OEM) 2. Kennametal India Limited, Bangalore (OEM) 3. Seco Tools India (P)Ltd, New Delhi(OEM) 4. Bharat Enterprises, Kanpur(for SECO make) 5. Ashoka Suppliers,Varanasi(For Ceratizit make) 6. Total Solutions, Kanpur (Mitsubisi) 7. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)8. Sagar Associates, Kanpur (ISCAR)

MAIN GROUP –‘J’ – Spares for cutter & holders of Inserted type

SUB GROUP NO. J01 – Screws (Insert, clamp & Cartridge)

S.NO. NAME 1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Bharat Enterprises, Kanpur(for SECO make) 4. Ashoka Suppliers,Varanasi(For Ceratizit make)

5. Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)6. Associated Technologies, Kanpur (multitech)

SUB GROUP NO. J02 – Kit of spares, Shims

S.NO. NAME 1 Kennametal India Limited, Bangalore (OEM) 2 Taegutec India Pvt Ltd, Bangalore (OEM) 3 Bharat Enterprises, Kanpur(for SECO make) 4 Ashoka Suppliers,Varanasi(For Ceratizit make) 5 Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)6 Associated Technologies, Kanpur (multitech) 7 Kaushiv Associates,Varanasi (WIDIA-Make)

MAIN GROUP –‘K’ – Threading Tools

SUB GROUP NO. K01 –Chasers S.NO. NAME

1. Aditya Tools Pvt. Ltd. , Kolkata(OEM) 2. SS Tools, Patiala(OEM) 3. Super Threading (India) Pvt Ltd, Ludhiana(OEM) 4. Aman Enterprises, Patiala 5. Micron Engg. Industries, Kolkata. (OEM) 6. Ravi Supply Agency, Kolkata( MCT)

Page 22 of 55

SUB GROUP NO. K02 – THREAD ROLLS

S.NO. NAME 1. Aditya Tools Pvt. Ltd. , Kolkata(OEM) 2. Machine Tools Equipment, Hyderabad(OEM) 3. Precomp Tools Pvt. Ltd, Pune(OEM)

SUB GROUP NO. K03—Threading holders & inserts including kits

S.NO. NAME 1 Kennametal India Limited, Bangalore (OEM) 2 Taegutec India Pvt Ltd, Bangalore (OEM) 3 Total Solutions, Kanpur(Mitsubisi) 4 Seco Tools India (P)Ltd, New Delhi(OEM) 5 Bharat Enterprises, Kanpur(for SECO make) 6 Saluja Machinery Co. Kanpur (for Vardex) 7 Sagar Associates, Kanpur (ISCAR) 8 Sri Hans Energy System(P) Ltd. , Kanpur (for Sandvik)

SUB GROUP NO. K04—Taps (straight flute)

S.NO. NAME 1. Birla Precision Technologies Limited,Kolkata (OEM) 2. Forbes Gokak Ltd., Mumbai (OEM) 3. YG-1 Industries India Pvt Ltd, Mumbai (OEM) 4. M/S Walter Tools India Pvt. Ltd., Pune 5. Associated Technologies, Kanpur (for RUKO brand)6. Addison & Co. Ltd. , Kolkata (OEM)

SUB GROUP NO. K05—Taps (Helical flute)

S.NO. NAME 1. YG-1 Industries India Pvt Ltd, Mumbai (OEM) 2. Guhring India Pvt Ltd, Bangalore(OEM) 3. Associated Technologies, Kanpur (for RUKO brand)4. M/S Walter Tools India Pvt. Ltd., Pune 5. Addison & Co. Ltd. , Kolkata (OEM)

Page 23 of 55

SUB GROUP NO. K06—Taps (High Performance)

S.NO. NAME 1. Walter Tools India Pvt. Ltd., Pune (OEM) 2. YG-1 Industries India Pvt Ltd, Mumbai (OEM) 3. Guhring India Pvt Ltd, Bangalore(OEM)

SUB GROUP NO. K07— Solid carbide Taps

S.NO. NAME 1. Walter Tools India Pvt. Ltd., Pune (OEM) 2. YG-1 Industries India Pvt Ltd, Mumbai (OEM) 3. Guhring India Pvt Ltd, Bangalore(OEM)

MAIN GROUP –‘L’- Form & Profile Tools (HSS)

SUB GROUP NO. L01— Gear Hob

S.NO. NAME 1. Mitsubishi Heavy Industries India Precision Tools Ltd., Ranipet. (OEM) 2. Motherson Advanced Tooling Solutions Ltd., Thane(OEM) 3. SS Tools , Patiala(OEM) 4. ESGI Tools, Patiala(OEM)

SUB GROUP NO. L02—GEAR SHAVERS S.NO. NAME

1. Mitsubishi Heavy Industries India Precision Tools Ltd., Ranipet. (OEM) 2. Motherson Advanced Tooling Solutions Ltd., Thane(OEM) 3. SS Tools, Patiala(OEM)

SUB GROUP NO. L03 – BROACHES

S.NO. NAME 1. Mitsubishi Heavy Industries India Precision Tools Ltd., Ranipet. (OEM) 2. Motherson Advanced Tooling Solutions Ltd., Thane(OEM) 3. ESGI Tools,Patiala (under development) (OEM) 4. Addison & Co. Ltd. , Kolkata (OEM)

SUB GROUP NO. L04 – BURNISHING TOOLS

S.NO. NAME 1. Mitsubishi Heavy Industries India Precision Tools Ltd., Ranipet. (OEM) 2. Motherson Advanced Tooling Solutions Ltd., Thane(OEM) 3. ESGI Tools, Patiala(OEM) 4. Indian instruments Pvt Ltd, Kolkata (OEM) 5. Addison & Co. Ltd. , Kolkata (OEM)

Page 24 of 55

SUB GROUP NO. L05 – SERRATION CUTTER FOR CYL. BLOCK AS PER DLW Drg. No. TM-37 (Procured through A.T.)

S.NO. NAME 1. Mitsubishi Heavy Industries India Precision Tools Ltd., Ranipet. (OEM)

SUB GROUP NO. L06– Serration Cutter 95 mm

S.NO. NAME 1. Birla Precision Technologies Limited,Kolkata (OEM) 2. Motherson Advanced Tooling Solutions Ltd., Thane(OEM) 3. Mitsubishi Heavy Industries India Precision Tools Ltd., Ranipet. (OEM) 4. Addison & Co. Ltd. , Kolkata (OEM)

SUB GROUP NO. L07– HSS Interlocking cutter TM-41

S.NO. NAME 1. Dies & Tools Ltd., Kolkata (OEM) 2. Ravi Supply Agency, Kolkata (for Steeledge) 3. Addison & Co. Ltd. , Kolkata (OEM)

MAIN GROUP –‘M’ – Dies, punches & shearing blades

SUB GROUP NO. M01 – DIES & PUNCHES S.NO. NAME

1. Delta Engineering Works, Howrah(OEM) 2. B.M. Small Industries, Kolkata(OEM) 3. D.B. Engineering (P) Ltd, New Delhi (OEM) 4. Tools & Dyne, Kolkata (OEM) 5. Central Tool Room, Ludhiana(OEM) 6. Boyd Smiths Pvt. Ltd. , Kolkata (OEM)

SUB GROUP NO. .M02 – DIES & PUNCHES (Special for CNC Turret Punch Press)

S.NO. NAME 1. Machine Tools (India) Limited, New Delhi(OEM) 2. Precision Engineers, Chandigarh(OEM) 3. ITIDA Marketing, New Delhi(OEM) 4. Precise Tools, Chandigarh(OEM)

Page 25 of 55

SUB GROUP NO. M03 – SHEAR BLADES

S.NO. NAME 1. D.B. Engineering (P) Ltd, New Delhi (OEM) 2. S.K. Beri & Brothers, New Delhi(OEM) 3. Tools & Dyne, Kolkata(OEM) 4. Boyd Smiths Pvt. Ltd. , Kolkata (OEM)

MAIN GROUP –‘N’- Cutting Tool accessories & Consumables

SUB GROUP NO. N01 – STANDARD ROTATING Adapters

S.NO. NAME 1. IMI Machine Tools Pvt. Ltd, Ahmedabad(OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM)

3. Haimer India Pvt Ltd., Pune(OEM) 4. A.S.Enterprises,Kanpur(Haimer) 5. Nikunj Eximp Enterprises Pvt. Ltd, New Delhi(Dandrea) 6. Ashoka Supplies,Varanasi( Ceratizit) 7. Sri Shakti Trading Corporation, Kolkata(IMI) 8. Bharat Enterprises, Kanpur(for SECO make) 9 Sagar Associates, Kanpur (ISCAR) 10 Tool Tech Enterprises,Kanpur (Dandrea)

SUB GROUP NO. N02 – Rotating adapters Old type (H. Milling machine)

S.NO. NAME 1 IMI Machine Tools Pvt. Ltd, Ahmedabad(OEM) 2 Haimer India Pvt Ltd., Pune(OEM) 3 A.S.Enterprises,Kanpur(Haimer) 4 Nikunj Eximp Enterprises Pvt. Ltd, New Delhi(Dandrea) 5 Bharat Enterprises, Kanpur(Seco) 6 Ashoka Supplies,Varanasi(Ceratizit) 7 Sri Shakti Trading Corporation, Kolkata(IMI) 8 Tool Tech Enterprises,Kanpur (Dandrea)

SUB GROUP NO. N03—TAPPING CHUCKS, TAP ADAPTER S.NO. NAME

1. IMI Machine Tools Pvt. Ltd, Ahemadabad(OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Haimer India Pvt Ltd., Pune(OEM)

4. A.S.Enterprises,Kanpur(Haimer) 6. Nikunj Eximp Enterprises Pvt. Ltd, New Delhi(Dandrea) 7. Sri Shakti Trading Corporation, Kolkata(IMI) 8. Ashoka Supplies,Varanasi(Ceratizit) 9. Sagar Associates , Kanpur(ISCAR) 10 Tool Tech Enterprises,Kanpur (Dandrea)

Page 26 of 55

SUB GROUP NO.N04—VDI Holders

S.NO. NAME 1. Industrial Enterprises, Kanpur (Mimatic make) 2 Associated Technologies, Kanpur (Precise) 3. Sagar Associates, Kanpur (ISCAR Make) 4. Nikunj Eximp Enterprises Pvt. Ltd, New Delhi(Dandrea) 5. Tool Tech Enterprises,Kanpur (Dandrea)

SUB GROUP NO.N05— Live VDI Holders S.NO. NAME

1. Nikunj Eximp Enterprises Pvt. Ltd, New Delhi(Dandrea) 2 Associated Technologies, Kanpur (Precise) 3. Industrial Enterprises, Kanpur (Mimatic make) 4. Sagar Associates, Kanpur (ISCAR Make) 5. Tool Tech Enterprises,Kanpur (Dandrea)

SUB GROUP NO. N06 – DRILL CHUCKS

S.NO. NAME 1. C.H. Lee, Kolkata (TRUMAX) 2. Krishna International, Delhi(TRUMAX) 3. Mukesh Trading Co. New Delhi 4. Sri Shakti Trading Corporation, Kolkata(IMI) 5. Associated Technologies, Kanpur (for RUKO brand)

SUB GROUP NO. N07 – Sleeves

S.NO. NAME 1. C.H.Lee, Kolkata(TRUMAX) 2. Trumax Machine Tools Pvt Ltd, Rajkot(OEM) 3. Mukesh Trading Co. New Delhi 5. Sri Shakti Trading Corporation, Kolkata(IMI) 6. Krishna International, Delhi(TRUMAX)

SUB GROUP NO. N08 – Cutting oils (Water based)S.NO. NAME

1. Bharat Petroleum Corporation Ltd, Allahabad 2. Fuchs Lubricant, New Delhi 3. Blasser Swisslube India, New Delhi 4. Hindustan Pertoleum Corporation, Lucknow 5. Indian Oil Corporation, Sonbhadra 6. Techno Qualities, Kanpur 7. R. S. Enterprises, Kanpur

Page 27 of 55

SUB GROUP NO. N09 – Cutting Oil (Neat oils)

S.NO. NAME 1. Bharat Petroleum Corporation Ltd, Allahabad 2. Fuchs Lubricant, New Delhi 3. Blasser Swisslube India, New Delhi 4. Hindustan Pertoleum Corporation, Lucknow 5. Indian Oil Corporation, Sonbhadra 6. Techno Qualities, Kanpur 7. R. S. Enterprises, Kanpur

SUB GROUP NO. N10 – Filter paper

S.NO. NAME 1. Filtronic, Kolkata 2. Filter Manufacturing Industries, Kolkata 3. Filtech India Limited, Kolkata 4. Swastick Enterprises, Kolkata

MAIN GROUP –‘P’- Tool Materials

SUB GROUP NO. P01 – Bronze Rod & BRONZE BUSH

S.NO. NAME 1. Gautam Engineering Works, Hooghly 2. Jyoti Engineering Works, Varanasi 3. Tools & Dyne, Kolkata 4. Bulls Eye Co., Varanasi

SUB GROUP NO. P02 – Solid carbide bars, flats & tips

S.NO. NAME 1. Rapicut Carbide Ltd, Ankleshwar(OEM) 2. Kennametal India Limited, Bangalore (OEM) 3. Taegutec India Pvt Ltd, Bangalore (OEM) 4. Ashoka Supplies,Varanasi(Ceratizit)

Page 28 of 55

SUB GROUP NO. P03 – Cermets Ceramic bars, flats

S.NO. NAME 1. Kennametal India Limited, Bangalore (OEM) 2. Taegutec India Pvt Ltd, Bangalore (OEM) 3. Bharat Enterprises, Kanpur(for SECO make) 4. Sagar Associates, Kanpur (ISCAR) 5. Associated Technologies, Kanpur (for NTK brand)6. Ashoka Supplies,Varanasi(Ceratizit)

SUB GROUP NO. P04- HSS & Die Steels

S.NO. NAME 1. Indo Ispat, Kolkata 2. S. S. Enterprises, Kolkata 3. Aditya Tools Pvt Ltd, Kolkata (OEM) 4. Swastick Enterprises, Kolkata 5. Ravi Supply Agency, Kolkata

SUB GROUP NO. P05- Alloy steels & spring steels

S.NO. NAME 1. Indo Ispat, Kolkata 2. S. S. Enterprises, Kolkata 3. Aditya Tools Pvt Ltd, Kolkata (OEM) 4. Ravi Supply Agency, Kolkata 5. Swastick Enterprises, Kolkata

MAIN GROUP –‘Q’- Jigs, Fixtures, templates & gages

SUB GROUP NO. Q01-- FIXTURE (FABRICATED, WELDING)

S.NO. NAME 1. B.M. Small Industries, Kolkata(OEM) 2. Delta Engineering Works, Howrah(OEM) 3. G.D. India Pvt Ltd, Bangalore(OEM) 4. V Weld Equipments, Vadodara(OEM) 5. Ved Sassomeccanica (India) Pvt. Ltd, Kanpur(OEM) 6. G. V. Enterprises, Faridabad(OEM) 7. PES Hydraulics (India) Pvt. Ltd., Yamuna Nagar(OEM) 8. Sri Ram Tool (India), Faridabad(OEM) 9. Perfect Engg. Works,Delhi. (OEM) 10. Boyd Smiths Pvt. Ltd. , Kolkata (OEM)

Page 29 of 55

SUB GROUP NO. Q02 -- FIXTURE (MACHINING) S.NO. NAME

1. B.M. Small Industries, Kolkata(OEM) 2. Delta Engineering Works, Howrah(OEM) 3. G.D. India Pvt Ltd, Bangalore(OEM) 4. G. V. Enterprises, Faridabad(OEM) 5. Indore Nitrider, Indore(OEM) 6. PES Hydraulics (India) Pvt. Ltd., Yamuna Nagar(OEM) 7. Sri Ram Tool (India), Faridabad(OEM) 8. Perfect Engg. Works,Delhi. (OEM) 9. Boyd Smiths Pvt. Ltd. , Kolkata (OEM)

SUB GROUP NO. Q03-- INSPECTION FIXTURE & GAUGES

S.NO. NAME 1. B.M. Small Industries, Kolkata(OEM) 2. G.D. India Pvt Ltd, Bangalore(OEM) 3. G. V. Enterprises, Faridabad(OEM) 4. Indore Nitrider, Indore(OEM) 5. PES Hydraulics (India) Pvt. Ltd., Yamuna Nagar(OEM) 6. Sri Ram Tool (India), Faridabad(OEM) 7. Perfect Engg. Works,Delhi. (OEM) 8. Boyd Smiths Pvt. Ltd. , Kolkata (OEM)

SUB GROUP NO. Q04 – JIGS S.NO. NAME

1. B.M. Small Industries, Kolkata(OEM) 2. Central Tool Room, Ludhiana(OEM) 3. G. V. Enterprises, Faridabad(OEM) 4. Indore Nitrider, Indore(OEM) 5. Delta Engineering Works, Howrah(OEM) 6. PES Hydraulics (India) Pvt. Ltd., Yamuna Nagar(OEM) 7. Sri Ram Tool (India), Faridabad(OEM) 8. Perfect Engg. Works,Delhi. (OEM) 9. Boyd Smiths Pvt. Ltd. , Kolkata (OEM)

SUB GROUP NO. Q05 -- TEMPLATES S.NO. NAME

1. B.M. Small Industries, Kolkata(OEM) 2. Delta Engineering Works, Howrah(OEM) 3. G. V. Enterprises, Faridabad(OEM) 4. Indore Nitrider, Indore 5. PES Hydraulics (India) Pvt. Ltd., Yamuna Nagar(OEM) 6. Sri Ram Tool (India), Faridabad(OEM) 7. Perfect Engg. Works,Delhi. (OEM) 8. Boyd Smiths Pvt. Ltd. , Kolkata (OEM)

Page 30 of 55

SUB GROUP NO. Q06 – Gauges (Threading type) Go-No Go Gage

S.NO. NAME 1. Size Control Gauges & Tools Pvt Ltd, Pune(OEM) 2. T.H. Habib & Co. , Kolkata 3. Zawar Gauges & Tools (Pvt) Ltd, Pune(OEM) 4. Accurate Sales & Services, Pune(OEM) 5. Size Masters Gauges & Tools, Pune(OEM) 6. Patel Engineering Tools Corporation, Kolkata(System-make) 7. Associated Technologies, Kanpur (for FANAR brand)

SUB GROUP NO. Q07 -- Go No Go Plug & Ring Gauges

S.NO. NAME 1. Size Control Gauges & Tools Pvt Ltd, Pune(OEM) 2. Zawar Gauges & Tools (Pvt) Ltd, Pune(OEM) 3. Size Masters Gauges & Tools, Pune(OEM) 4. C.H.Lee, Kolkata 5. Tools & Tools (India) , Kolkata 6. Ravi Supply Agency, Kolkata(Size Control-make) 7. T.H. Habib & Co. , Kolkata 8. Patel Engineering Tools Corporation, Kolkata(System-make) 9. Associated Technologies, Kanpur (for FANAR brand)

SUB GROUP NO. Q08 -- Work Basket, Wire-Mesh, Spacing –Grid, Lifting-Fixture.

S.NO. NAME 1. B.M. Small Industries, Kolkata(OEM) 2. Delta Engineering Works, Howrah(OEM) 3. Precision Engg. Concern, Howrah(OEM) 4. Shiv Hardware & Mill Stores, Varanasi. (OEM) 5. Commercial Enterprises, Kolkata(OEM) 6. Jyoti Engg.Works, Varanasi. (OEM)

MAIN GROUP –‘R’- Measuring Instruments SUB GROUP NO. R01 -- Dial Indicators

(Mahr Federal, Starrett, Standard, TESA & Mitutoyo jeweled only) S.NO. NAME 1. Krishna International, Delhi 2. D.B. Shah & Brothers, Kolkata 3. Ravi Supply Agency, Kolkata 4. Mitutoyo South Asia Pvt Ltd, New Delhi 5. Tools & Tools (India) , Kolkata 6. Vimal Vinod & Co., Kanpur 7. Patel Engineering Tools Corporation, Kolkata 8. Meru Infrastructure (p) Ltd.,Varanasi (Starrett)

Page 31 of 55

SUB GROUP NO. R02 -- Dial Bore gages Brands - Standard, Mahr, Starrett,Mitutoyo.

S.NO. NAME 1. Tools & Tools (India) , Kolkata 2. D.B. Shah & Brothers, Kolkata 3. C.H.Lee, Kolkata 4. Krishna International, Delhi 5. Vimal Vinod & Co., Kanpur 6. Patel Engineering Tools Corporation, Kolkata 7. Meru Infrastructure (p) Ltd.,Varanasi (Starrett)

SUB GROUP NO. R03 - MICROMETERS O/S, I/S, TUBE, PITCH, TRY POINT Brands -Tesa, Starrett, Mitutoyo, Mahr, Scherr Tumico

S.NO. NAME 1. Tools & Tools (India) , Kolkata 2. Ravi Supply Agency, Kolkata 3. Mitutoyo South Asia Pvt Ltd, New Delhi 4. T.H. Habib & Co. , Kolkata 5. Krishna International, Delhi 6. D.B. Shah & Brothers, Kolkata 7. Patel Engineering Tools Corporation, Kolkata 8. Meru Infrastructure (p) Ltd.,Varanasi (Starrett)

SUB GROUP NO. R04 -VERNIER SCALE, DEPTH, HEIGHT GAUGES Brands -Tesa, Starrett, Mitutoyo, Mahr, Scherr Tumico

S.NO. NAME 1. Krishna International, Delhi 2. D.B. Shah & Brothers, Kolkata 3. Mitutoyo South Asia Pvt Ltd, New Delhi 4. Ravi Supply Agency, Kolkata 5. Tools & Tools (India) , Kolkata 6. C.H.Lee , Kolkata 7. Patel Engineering Tools Corporation, Kolkata 8. Meru Infrastructure (p) Ltd.,Varanasi (Starrett)

Page 32 of 55

MAIN GROUP –‘S’- Hand Tools & Power Tools

SUB GROUP NO. S01 – Garage tools & Hand Tools Brands - SNAP-ON, Everest, Taparia, Tristar,Armstrong.

S.NO. NAME 1. Sri Shakti Trading Corporation, Kolkata 2. Swastick Enterprises, Kolkata 3. Tools & Tools (India), Kolkata 4. D.B. Shah & Brothers, Kolkata 5. Tristar Industrial Tools (P) Ltd, Thane 6. Jhalani Impex, New Delhi 7. Bulls Eye Co.,Varanasi.( Armstrong-Make)

SUB GROUP NO. S02 -- PNEUMATIC TOOLS (only specified models should be purchased)

S.NO. NAME 1. Chicago Pneumatics India Ltd., Lucknow (CP) 2. Emprise Marketing, Lucknow (For CP MAKE ONLY) 3. Ingersoll Rand Wadco Tools Limited, Ghaziabad 4. Tools & Tools (India), Kolkata (for Ingersoll) 5. Bulls Eye Co.,Varanasi.( For Dynabrade - make) 6. Meru Infrastructure (p) Ltd.,Varanasi (For CP make)

SUB GROUP NO. S03 -- PNEUMATIC TOOLS SPARES

S.NO. NAME 1. Emprise Marketing, Lucknow (For CP MAKE ONLY)2. Vijay Industrial Equipments Co., Kolkata 3. Vijay Air Control, Bangalore 4. Mining Machinery Company, Howrah 5. VBS Engineering, Vadodara 6. Indo Compressed Tools Pvt Ltd., Kolkata 7. Tools & Tools (India), Kolkata (for Ingersoll)

SUB GROUP NO. S04 – Tube Expanders

S.NO. NAME

1. Tristar Industrial Tools (P) Ltd, Thane 2. Powermaster Engineers Pvt Limited, Mumbai 3. Tube Expansion Equipments Pvt Ltd, Parwanoo (Teep)

4. G.B. Tools & Accessories, Kolkata(OEM)

Page 33 of 55

SUB GROUP NO. S05 – Electric hand tools Brands - Bosch, Hitachi, Atlas Copco

S.NO. NAME 1. Emprise Marketting, Lucknow (ATLAS Copco) 2. Sharma Enterprises, Varanasi (Bosch) 3. Sri Shakti Trading Corporation, Kolkata (Hitachi) 4. Ashok Auto Service, Gorakhpur (Bosch) 5. Motor Industries Co. Ltd, Lucknow (for Bosch Tools)

SUB GROUP NO. S06 – Electrical cable crimping dies & equipments

S.NO. NAME 1. Blue Whale Engineering, Mumbai 2. Emprise Marketting, Lucknow (for CP) 3. Ingersoll Rand Wadco Tools Limited, Ghaziabad 4. D.B. Shah & Brothers, Kolkata 5. Tools & Tools (India), Kolkata

MAIN GROUP –‘T’- Work Holding Machine Tool accessories

SUB GROUP NO. T01 – Chucks manual (Low end)

S.NO. NAME 1. Airtech Pvt.Ltd., Dharwad(OEM) 2. Sonalkar Tool Works Pvt.Ltd., Harihar(OEM) 3. Chuckmatic Pvt Ltd, Dharwad(OEM) 4. Guindy Machine Tools Limited, Chennai(OEM) 5. Krishna International, Delhi 6. Mukesh Trading Co. New Delhi 7. Neha Enterprises, Kanpur (Vertex make)

SUB GROUP NO. T02 – Chucks manual (High end)

S.NO. NAME 1. Rohm Clamping Technologies Pvt Ltd, Bangalore(OEM) 2. Guindy Machine Tools Limited, Chennai(OEM) 3. Sri Shakti Trading Corporation, Kolkata (Kitagawa) 4. Swapnil Enterprises,Kanpur(Kitagawa)

Page 34 of 55

SUB GROUP NO. T03 – Chucks Power

S.NO. NAME 1. Rohm Clamping Technologies Pvt Ltd, Bangalore(OEM) 2. Guindy Machine Tools Limited, Chennai(OEM) 3. Airtech Pvt Ltd, Karnataka(OEM) 4. SMJ Marketing, Pune (Autoblock) 5. Swapnil Enterprises,Kanpur(Kitagawa)

SUB GROUP NO. T04 – Jaws as per DLW drawings

S.NO. NAME 1. B.M. Small Industries, Kolkata(OEM) 2. Delta Engineering Works, Howrah(OEM) 3. Central Tool Room & Training Centre, Kolkata(OEM) 4. G. V. Enterprises, Faridabad(OEM)

SUB GROUP NO. T05– Centers (revolving & fixed) Brand: Trumax, Vertex

S.NO. NAME 1. Trumax Machine Tools Pvt Ltd, Rajkot(OEM) 2. Mavani Engineering Works, Rajkot(OEM) 4. C.H.Lee , Kolkata ( Trumax) 5. Sri Shakti Trading Corporation, Kolkata ( Trumax) 6. Krishna International, Delhi ( Trumax) 7. Neha Enterprise, Kanpur (for Vertex)

SUB GROUP NO. T06– Rotary tables & dividing heads

S.NO. NAME 1. Trumax Machine Tools Pvt Ltd, Rajkot(OEM) 2. C.H.Lee , Kolkata 4. Sri Shakti Trading Corporation, Kolkata 5. Krishna International, Delhi 6. Neha Enterprise, Kanpur (for Vertex)

Page 35 of 55

MAIN GROUP –‘U’- Lifting, Clamping & Fixing accessories SUB GROUP NO. U01– Vices

S.NO. NAME 1. Krishna International, Delhi 2. Swastick Enterprise, Kolkata 3. Sri Shakti Trading Corporation, Kolkata 5. C.H.Lee, Kolkata 6. Neha Enterprise, Kanpur 7. Inder Industries, Jalandhar 8. Unique Industries (India), Jalandhar 9. Swapnil Enterprises,Kanpur (Kitagawa)

SUB GROUP NO. U02 – CRANE HOOKS, EYE BOLTS & NUTS

S.NO. NAME 1. Elequip Tools Pvt Ltd, Kolkata 2. Jain Trading Co, Kolkata 3. Sri Shakti Trading Corporation, Kolkata 4. Kepro Tools & Equipments Pvt Ltd, Kolkata(OEM)

SUB GROUP NO. U03 – Toggle clamps

S.NO. NAME 1. Krishna International, Delhi 2. Swastick Enterprise, Kolkata 3. Sri Shakti Trading Corporation, Kolkata 5. C.H.Lee, Kolkata 6. Abott Tool Fast, Delhi 7. Bull’s Eye Co., Varanasi

SUB GROUP NO. U04 – Fasteners (Unbrako/PFL/TVS/LPS)

S.NO. NAME 1. Steel & Hardware, Varanasi 2. Jyoti Engineering Works, Varanasi 3. Swarn Enterprise, Lucknow 5. Sri Prakash Industrial Corporation, Kolkata 6. Bull’s Eye Co., Varanasi

Page 36 of 55

SUB GROUP NO. U05– V-blocks & clamps

S.NO. NAME 1. Krishna International, Delhi 2. Swastick Enterprise, Kolkata 3. Sri Shakti Trading Corporation, Kolkata 5. C.H.Lee, Kolkata 6. Neha Enterprise, Kanpur 7. Inder Industries, Jalandhar 8. Abott Tool Fast, Delhi(OEM)

SUB GROUP NO. U06 – Magnetic plates & magnetic V-blocks, Magnetic dial holders

S.NO. NAME 1. Krishna International, Delhi 2. Swastick Enterprise, Kolkata 3. Sri Shakti Trading Corporation, Kolkata 5. C.H.Lee, Kolkata 6. Neha Enterprise, Kanpur 7. Inder Industries, Jalandhar 8. Abott Tool Fast, Delhi(OEM)

SUB GROUP NO. U07 – T-bolts & clamps & jacks

S.NO. NAME 1. Krishna International, Delhi 2. Abott Tool Fast, Delhi 3. Sri Shakti Trading Corporation, Kolkata 4. C.H.Lee, Kolkata 5. Swastick Enterprise, Kolkata

SUB GROUP NO. U08 – Pneumatic & hydraulic swing clamps

S.NO. NAME 1. Kepro Tools & Equipments Pvt Ltd, Kolkata(OEM) 2. Quiloc (P) Ltd, Bangalore(OEM) 3. Festo Control, Bangalore(OEM) 4. Elequip Tools Pvt Ltd, Kolkata 5. Jain Trading Co, Kolkata 6. Sri Shakti Trading Corporation, Kolkata

Page 37 of 55

MAIN GROUP –‘V’- Hydraulic & pneumatic equipments

SUB GROUP NO. V01 – HYDRAULIC EQUIPMENTS & fittings, Hoses, couplings, cylinders & Valves

S.NO. NAME 1. Cots & Cots, New Delhi(OEM) 2. Yuken India Ltd, Bangalore(OEM) 3. Vankos & Co., Patna(OEM) 4. Lokpal Industries, Ghaziabad(OEM) 5. Oriental Engineering Works Pvt Ltd, Yamuna Nagar(OEM) 6. Jain Trading Co, Kolkata

SUB GROUP NO. V02 –Pneumatic accessories & fittings.

S.NO. NAME 1. Festo Controls Pvt Ltd, Bangalore(OEM) 2. Quicloc (P) Ltd, Bangalore(OEM) 3. SMC Pneumatics (India) Pvt Ltd, Gautam Budhnagar(OEM)

Page 38 of 55

S.N. NAME & ADDRESS Phone & Fax No 1. Abbott Tool Fast Private Limited,

Plat No. 28, Sector -27A, Faridabad – 121 002 Email- abbott@airtelbroadband.in

Phone-0129-2276497, 4642237, 4045238 Fax No: 0129-2271573

2. Accurate Sales & Services Pvt Ltd HO: Gauge House, 67, Hadapsar Industrial Estate, PO Box No-1202, Pune-411 013. Email:accurate@vsnl.com Web:www.accutrategauging.com

Phone: 020-26870158 Fax: 020-6870858 Mobile:09711446046 Mr. Mukesh Kumar

Accurate Sales & Services Pvt Ltd. Branch: D-57,Sector-37phase-Vi Udyog Vihar Gurgaon-122 001 Email:accuratedelhi@accurategauging.com

Telefax: 0124-4036166,4034639

3. Aditya Tools Pvt. Ltd., 38, Strand Road, Kolkata- 700001. Email: adityatools@hotmail.com

Phone: 033-2243-1729,1743 09433088278

4. Addison & Co. Ltd., (i) F65B,SIPCOT Industrial Park, Irrungattukottai,Sriperumpudhur Taluk, Kancheepuram Dist.

Chennai- 602 102.

Phone: 044-37180077,0030 FAX: 044-3718 0028, 0006

(ii) 23,Avenue First Road, 2nd Floor Santoshpur, Kolkata-700 075. Email: addisonkolkata@addisonmail.com

Phone: 033-6545 1228 033-2416 5615 FAX: 033-2416 5510.

5. A.S.Enterprises, 435/6,Shastri Nagar, Kanpur-208 005(U.P.) Email:as.ent@rediffmail.com or as09enterprises@gmail.com

Phone: 0512-2314615.

6. Airtech Pvt.Ltd. 5th K.M. National Highway No.4, Village Narendra (Next To Agri. College), Dharwad- 580 005. Email:airtech.dharwad@gmail.com

Phone: 0836-2780080, 2780077, 2780085 Fax: 0836-2780095.

7. Aman Enterprises 8F Street No. 2, Tripuri Town, Patiala -147001. E-Mail: fastrac24@yahoo.co.in

Phone – 0175-2353500 Mob: 09814785550

Page 39 of 55

8. Anglo Swiss Watch Co. 6,Binoy Badal Dinesh Bagh P.B.No.- 100 Kolkata-700 001. Email:info@angloswiss.in

Phone: 033-2230 0295,0297 Fax; 033-2230 6461.

9. Ashoka Auto Service Mico House, 10 Park Street Gorakhpur- 273009 (UP) Phone: (0521)338315, 338312 Fax: 349145Email: aasray.gkp@gmail.com

Phone: 0551-2341097, 2338312

10. Associated Technologies H.I.G. – 173, Shri OM Vatika, G-1 Ratan Lal Nagar, Kanpur – 208 022 Email: asso.tech@sify.com

Phone: 0512-3247627 Fax: 0512-2285076 Mobile – 9958326262 09369989583 Mr. Dheeraj Rastogi.

11. Anisen Diamond Products 3, Second West Street, Kamraj Nagar, Chennai – 600 041 Email: anissendia@indiatimes.com Web: www.janisendia.com

Phone: 044-24416401, 24926173 Fax: 044-24965205 Mobile: 0938236077.

12. Anand Hardwares & Tools Co. 11, Clive Row Shop No. 10 & 11, Ground Floor Kolkata – 700 001. Email: anand4222@dataone.in

Phone: 033-2242 4222, 2242 3799, 2242 3106 Fax: 033-2242 3799. Mr. Hanuman Bhutoria.

13. Ashoka Suppliers, K 67/81, P32, Nati Imaly,Bharat Milap Colony,Varanasi-221001. Email:ashok.n.sinha@gmail.com

Phone: 0542-2313428. Fax: 0542-2313428. Mob: 09919977888

14. B.M. Small Industries 10A & 14, Nirode Behari Mullick Road Kolkata - 700 006 (Monictolla) Email: bmsitarama@vsnl.net

Phone – 033-2350-6422 Fax: 033-2350-6422, 2554-5758 Mobile: 09831009748 Mr. B. Mandal

15. Binode Tools Corporation "Usha Kuthi" Garia Station Road, (Near Garia B.P. High School) Kolkata – 700 0084 Email: binode.tools@yahoo.com

Ph: 033-2462-6521, 2435-5037 Mobile: 09830667312 Mr. Bapi Barman

16. Bipico Industries (Tools) Pvt. Ltd., 506-A, Lotus House, 5th Floor, 11, Sir V. Thackersey Road, Mumbai- 400 020 E-Mail: bipico@ Vsnl.com Web: www.bipicoexp.com

Phone: 022-2200 3881, 2200 0747 Fax: 022 - 2200 1631

Page 40 of 55

17. Blue Whale Engineering A-11, New Indralok C.H.S. Old Nagardas Road, Andheri(East) Mumbai – 400 069. Email:bluewhaleengg@gmail.com

Phone: 022-2837 1676/ 2408 2565, 09920363535 Fax: 022-2401 6843/2825 7282

18. Bharat Enterprises, 115/347,E-2 New Basti,Maswanpur, Rawatpur, Kanpur-208 019. Email: bharat_etp2001@yahoo.com

Phone: 0512-2261564 9839911398 Fax-0512-2269088 Mr. S.K. Singh

19. Blasser Swisslube India Pvt Ltd., Ist Floor, C-4, Safadarjung Development Area New Delhi - 16 Email:india@blaser.com

Phone: 011-41657037

20. Birla Precision Technologies Limited, (Indian Tool Manufacturers), 'Nicco House' (4th Floor) 2, Hare Street, Kolkata - 700 001 E-mail: itmcal@giascl01.vsnl.net.in

Phone – 033-22485191 09339846922 Fax:033-22486449

21. Boyd Smith S Private Limited G.P.O. Box No. 42. B-3/5,Gillander House, 8, Netaji Subhas Road, Kolkata-700 001, West Bengal. E-mail: boydsmiths@vsnl.net boydsmithspltd@gmail.com

Phone : 033-22302139,22314769. Fax: 033-22308105. Ashok kumar-09830130871. Ashish Boyd- 09830015912.

22. Bull’s Eye Company Near Singh Service Station Mohan Saray Industrial Area, Raja Talab,Varanasi-221311. Email: atulkumarsigh@gmail.com

Mr. Atul Singh Mob: 09305254706. 09794259650.

23. C.H.Lee 67-B, N.S. Road, P.O. Box No. 77 Kolkata - 700 001 E-mail: chlee39@hotmail.com

Phone: 033-2243-3403 Fax: 033 - 2243 3568

24. Carborundum Universal Ltd., 2nd Floor,Param Tower 11/5-B,Pusa Road,Opposite Telephone exchange, New Delhi- 110005. Email: cumidelhi@cumi.co.inWeb: cumiabrasive.com

Phone: 011-25811342/43 Fax: 011-30901903,25811344

Carborundum Universal Ltd., Bonded Abrasive Division P.B. No.- 2272,Tiruvottiyur,Chennai-600 019.

Phone: 5733322,5733029 Fax: 25733499

Page 41 of 55

25. Central Tool Room A - 5, Focal Point Ludhiana - 141 010. Email: info@ctrludhiana.comcentool@jla.vsnl.net.in

Phone: 0161 - 2670057/58/59 Fax: 0161 - 2674746

26. Chicago Pneumatics India Ltd. House No. 2/272, Vikas Khund, Gomti Nagar, Lucknow-226010. Email: arvind1970j@indiatimes.com

Phone: 0522-2393529 Fax: 0522-2394021

27. Chuckmatic Pvt.Ltd. Dharwad Byepass, N.H.4 Village Narendra, Dharwad – 580005. Email:chuckmatic.dharwad@gmail.com

Fax: 0836-347969 0836 2780077

28. COMMERCIAL ENTERPRISES,, 10, BIPLABI RASH BEHARI BASU ROAD, 2nd FLOOR, G.P.O. BOX NO. 2742, KOLKATA - 700 001, W.B.(INDIA). email:commercial@rediffmail.com

Phone: 033-2204707,2102882 Fax: 033-2431649 033-22200726

29. Cots & Cots 205, Vardhman Chambers, G-Block, Community Centre, Vikaspuri New Delhi-110 018 Email: info@cotsncots.com

Fax: 011-25523028 Mob: 09868281928

30. CERATIZIT India Pvt. Ltd., 58-Motilal Gupta Road, Barisha, Kolkata- 700 008 Email: kamlesh.kumar@ceratizitindia.co.in

Phone: 033-2494-0335, 0581, 6382 Fax: 033-2494-5839/2494-1472 Mobile: 09831595605.

31. D.B. Engineering (P) Ltd A-119, Okhla Phase-II, New Delhi - 110 020 Email: sales@atlasknives.com

Phone: 011-26912177, 26315033, 26840286 011-41616454,40767711. Fax- 011- 26829812, 24628275 011-26386453,24628275.

32. D.B. Shah & Brothers 67-A, N.S. Road, Kolkata-700 001. Email: sales@skberi.com

Ph: 033-22432404, 22431158 Fax: 033-22432077

33. Delta Engineering Works Ichapur, H.I.T. Road, Kamardanga, Howrah - 711 104. Email:-delta.eng2010@gmail.com

Phone: 033-26773504, 26672905, 09830313981 Fax: 033 - 2877 7593 Mr. S Panchal

Page 42 of 55

34. Dies & Tools Ltd., 8, Camac Street, 4th Floor, Suit No. 1 Kolkata- 700017 E-mail: dito@cal3.vsnl.net.in

Phone: 033-2829306, 2829305 Fax: 033-2827513, 2829302 9830134362 Mr. Nikhilesh Chakraborty

35. Diamond Boart International Pvt Ltd 2D, “ELDORADO” 112, Nungambakkam High Road, Chennai – 600 034. Email:: sales@diaboart.com

Phone: 044-28253337/28275687 Fax: 044-28275687 Fax No : +91 - 44 - 2824 1411

36. Eastern Diamond Products (P) Ltd., 19/2 Banmali Nasker Road, Behala, Kolkata- 700 060. Email: edpl@cal2.vsnl.net.in Web: www.geocities.com/easterndpl

Phone: 033-2479-5587, 24732525 ,24785587,24460111. Fax: 033-24785669 03324785669.

37. Elequip Tools Pvt Ltd 19, Pollock Street (2nd Floor) Kolkata-700 001. Email:surekaji@vsnl.com

Phone: 033-2235-1792/2400/3385, 09831027595 Fax:033-2221-5670 Mr. Ajay Sureka

38. Emprise Marketing B-1/31,Sector-H, Aliganj Lucknow- 226 024. Email:emprise@sify.com

Phone: 0522-3208468,3221900 Fax: 0522-4017682.

39. ESGI Tools ESGI Tools Pvt. Ltd., B-6 Focal Point Patiala-147004. Email:esgi@esgitools.com

Phone: 0175-2233991-94 Fax: 0175-2233990

40. Essem Tools & Component Mfg. Co. Plot No 119, C.I.E., Expansion Programme Gandhi Nagar, Balanagar Hyderabad – 500037. Email:esemtoolscomp@rediffmail.com

Phone: 040-23086505, 23731423 (R), 09885193137 Fax: 040-23779156 Mr. Arun Kr Singh

41. Forbes Gokak Ltd., Saki Powai Road, Chandivali Mumbai - 400 072 E-mail: wed.bom3@forbesgokak.sprintrpg.ems.vsnl.net.in

Phone: 022-28521861, 28521868 Fax: 022-28521799

42. Festo Controls Pvt Ltd 237, B, Bommasandra Indl Area, Hosur Highway, Bangalore- 562 158. Email:info_in@festo.com

Phone: 080-27833359 Fax: 080-27833362/27832058

43. FUCHS LUBRICANTS (INDIA) PVT. LTD., 10/66, INDUSTRIAL AREA, KIRTINAGAR, NEW DELHI - 110 015. Email:Rajeev.singh@fuchindia.com marketing@fuchindia.com

Phone: 011-41426071/72 Fax: 011-25919785 Mob: 09810459688 Mr. Rajeev Singh

Page 43 of 55

44. Filtronic 37, Central road, Kolkata – 700 032. Email: filt99@yahoo.com

Phone: 033-24124594, 24140303, 30951829 Fax: 033-2287 8853/ 22309296

45. Filter manufacturing Industries 6/CH 28, Anand Palit Road, Kolkata Email:filtermfg@gmail.com

Phone:

46. Frontier Toolings, D-8, Gujaini, Kanpur-208 022. Email: frontier_toolings@rediffmail.com

Phone: 0512-3201290 Fax: 0512-2281785 Mob: 09335037174 Mr. Atul Srivastava

47. Filtech India Ltd, 147, N S Road, Kolkata-1 Email:filt_india@gmail.com

Phone :033 - 22385322

48. G.B. Tools & Accessories, 1- Lindsay Street, 1st Floor, Kolkata- 700087. Email: gbtools.acrs@gmail.com

Phone: 033-2249 - 9833 Fax: 033 - 2249-9833

49. G.D. India Pvt LtdNo. 66, Devayani industrial area, Gowdanaplaya, Banashankri II Stage Post, Bangalore - 560 061. Email: gdindia07@.gmail.com

Phone- 080-26660782/0220/1939/0411 080-26663807, Mobile: 08088920102 Fax- 080-26660783

50. Grindcool & Co. 56,N.S.Road, Kolkata-700 001. Email:visit2grindcool@gmail.com

Phone-9681076490,9143282685, 9831145665,

51. M/s G.V. Enterprises, B-139, Sector-11, Faridabad -121001. Email: pkk_gventerprises@yahoo.com

Telefax: 0129-4005290 Contact Person: Mr. P. K. Kushwaha, Mob-09810346290

52. Gautam Engineering Works 132/B, S.C. Chatterjee Street, P.O. - Konnagar Hooghly - 712 235. Email:candefcent_engg@rediffmail.com

Phone: 033-26438395, 26503770 Fax: 033-26602699 Mr. G. ganguli 9007484178.

Page 44 of 55

53. Guindy Machine Tools Limited 154, Velachery Tambaram Main Road, Pallkkaranai, Chennai – 601 302. Email: gmt@gmt.co.in

Phone: 044-22460811, 22460627-629 Fax: 044-22460112, 22469027

54. Grind Master machines Pvt. Ltd B-II, MIDC Area, Near Railway Station Aurangabad - 431 005 E-mail: master.grind@gems.vsnl.net.in

Phone: 0240-2332234, 2321162, 2321163 Fax: 0240-2334805, 2343393

55. Grindwell Norton Ltd, D1/262,Vineet Khand,Gomati Nagar, Lucknow-226 010. Email: uttam.bhaduri@saint-gobain.comWeb: www.grindwellnorton.com

Mob: 099361 11223

Grindwell Norton Ltd, Leela Business Park,5th Level Marol,Andheri(E) Mumbai-400 059. Email:

56. Guhring (India) Pvt Ltd, Plot No. 129, Bommasandra Industrial Area, Phase-IV Hosur Road,anekal taluk, Bangalore – 560 099. Email:info@guhring.in

Phone: 080-4032 2500-2509 Fax: 080-22892510

57. Haimer India Pvt Ltd., Indo German Technology Park, Survey No. 297 - 299 At & Post – Village – Urwade, Taluka – Mulshi Dist – Pune-412108 Email:haimer@haimer.in

Phone:09890153568

Fax:02066750551

58. Hind Agencies 67-B, N.S. Road, Kolkata-700001. Email: alokep@caltigergold.com

Phone: 033-2243-1464/3358 Fax: 033-2243-3567

59. Hind Associates, 67B, Netaji Subhas Road, Suite # 24, Kolkata - 700 001 E-mail: alokep@caltigergold.com

Phone: 033-2420136/37 Fax: 033-2436927

60. Hind Tooling Industries 25, Chanditala Main Road, Kolkata-700 053. Email:hind_tooling@gmail.com

61. Hittco Tools Ltd, No. 78, III Phase, Peenya Industrial Area, Bangalore – 560 058. Email:sales@hittco.com

Phone: 080-28392265, 28394327 Fax No: 080-28394049

Page 45 of 55

62. Hoshi Tools (P) Ltd., B-166, 4th Main Road, 2nd Stage, Peenya Industrial Area Bangalore – 560 058. Email:hoshi@airtelmail.in

Phone: 080-28361728 Fax: 080-28361779

63. Hindustan Petroleum Corporation Ltd, Plot No. 1, Nehru Enclave, Gomti Nagar Lucknow. Email:hpcorporation@rediffmail.com

64. IMEXSU (INDIA) 6-A, Vaibhav Industrial Estate, Salivihar Road, Mumbai - 400 072. Email: pm2@imexsu.in

PH - 022-28570339, 28570445 Fax: 022-28574829, 28572336

65. IMI Machine Tools Pvt. LtdBlock No.-:135/2,Bileashwarpura, PO- Chhatral,TA-Kalol, District- Gandhinagar (Gujrat) Email: imi@imitoolsindia.com

Phone: 079 – 65499019, 65499020 Phone: 02764-233983 Fax: 079 – 26569538, 02764-233840.

66. INGERSOLL RAND WADCO TOOLS LIMITED 37-A, Site 4, Sahibabad Industrial Area, Ghaziabad - 201 010 Email:ingersollrand@gmail.com

Phone: 0120-2895116-126 Fax: 0120 – 2895127

67. INDIAN INSTRUMENTS PRIVATE LTD., 4,MANDEVILLE GARDENS, KOLKATA - 700 019 E-Mail: ins@cal.vsnl.net.in

Phone: 4405544

68. Indo Ispat76-D,, Harish Chatterjee Street, Bhawanipur Kolkata-700 025. Email:indoispat@vsnl.net

Phone: 033-2455-4142/0496 Fax:033-2455 4142

69. Industrial Enterprises (Sandvik) Regd office: 231, Adarsh Nagar, J.K. Colony, Kanpur – 208010 Email:Indus_entp@satyam.net.in

Phone: 0512-2461064

Marketing Office: 21 Ka, Govt Industrial Estate Kalpi Road Near M.L.D.C. Kanpur – 208010

Phone- 0512-2221382 Telefax: 0512-2221371

70. ITIDA Marketing E-46/8, Okhla Industrial Area, Phase-II, New Delhi – 110020. Email:dilpreet@itida.com

Phone: 011-40503737 Fax: 011-40503511

71. Indian Oil Corporation 7, Patel Nagar, Murdhwa Road, Renukoot, Sonbhadra Email:ioc_son@rediffmail.com

Page 46 of 55

72. INDORE NITRIDERS, 15-B, SECTORE 'A' INDUSTRIAL AREA, SANWER ROAD, INDORE - 452015 E-Mail: nkasat@eth.net, nitriders@yahoo.com

Phone: 5047368, 2723303 Fax: 2721778

73. INDO COMPRESSED TOOLS (PVT)LIMITED, 228A, A.J.C.BOSE ROAD, 3D, LANDMARK, KOLKATA-700020. E-Mail: incomcal@cal2.vsnl.net.in

Phone: 280-9456. Fax: 0332808551

74. Inder Industries Basti Nau, Inder Nagar, Jalandhar – 144 002. Email: inder@inderindia.com

Phone: 0181-2201666/ 2255777 Fax: 0181-2251999

75. Jhalani Impex Gedore House, 51-52, Nehru Place, New-Delhi-110019. Email: jtiforge@vsnl.net

Phone: 011-26286198. Fax: 011-26431619, 26421152.

76. J.K. Engineering (Diamond Works), 5, Jivarajniwas, 408, L.B. Shastri Marg, Kurla, Mumbai-400070 . Email: sdtools@bom5.vsnl.net.insales@sunrajindustries.com

Phone: 022-26501543,26501421,26501624, 26508452 Fax: 022-26502967, 26505570

77. Jain Trading Co Shangri-LA, 119A, Ripen Street, (1st Floor) Wing –B Kolkata-700 016. Email:jtc@cal2.vsnl.net.in

Phone: 033-2217-7937/8221 Fax: 033-2217-7875

78. Jyoti Engineering Works Adityanagar, PO-Sundarpur Varanasi-221 005. Email:jyotienggworks@gmail.com

Mob:9415352822

79. Kaushiv Associates, D-63/11, 2nd Floor, Bindal complex, Mehmoor Ganj, Varanasi-221010.

Phone No.- 0542-3290877. Ashwani Rai- 09919911000.

80. Kennametal India Limited, 8/9th mile, Tumkur Road, Bangalore – 560 073. Email: Web: www.kennametal.com

Phone: 080-28394321 Fax: 080-28394708

81. Krishna International 32, Community Center, Industrial Area, Wazirpur, Ring Road, Delhi - 110 052. Email: granite@bol.net.in

Phone: 011-27216966, 27427066 Fax: 011-27222052. 09810300499. Mr. Varun Khurana

Page 47 of 55

82. Kepro Tools & Equipment Pvt Ltd., 40, N. S. Road, Ist Floor, Kolkata – 700 001. Email: kepro_cal@vsnl.net

Phone: 033-55457554, 22426311, Fax: 033-22429349

83. L.M. Van Moppes Diamond Tools (I), P.B. No. 853, Hosur Garden, Samriam, Chennai- 600011. Email: vanmoppes@vsnl.com

Phone: 044-25589668, 25375678. Fax: 044-25375346

84. Lenox India Pvt Ltd., 903/904, GIDC Industrial Estate, Ankleshwar, Gujrat – 393 002. Email:

Phone-(02646) 221519, 252368 Fax- (02646) 251326

Sales office: Lenox India Pvt Ltd., 302K,3rd floor,Kamalaya centre 156A Lenin Sarani,Kolkata-700 013. Email: maplkolkata@lenoxtools.com

Phone: 033-22154499.

85. Lokpal Industries A-6, Sector – 3 Noida – 201 301. Email: info@lokpal.com

Telefax: 0120-2522126, 2527591

86. Machine Tools (India) Limited, 284, Sultan Sadan-II, West End Marg, Lane No.3, Saidulajab, Mehrauli, New Delhi – 110 030. Email: salesdelhi@mactool.com

Phone: 011-29535461-64 Fax: 011-29535390

87. Mavani Engineering Works “Trumax House” Dr, Vikram Sarabhai Road, Rajkot – 360 004. (Guj). Email:trumax_ad1@sancharnet.in

Phone: 0281-2388512, 2388881 Fax: 0281-2457817

88. Machine Tools Equipment Plot No. 58/A, S.V. Co-op Industrial Estate Balanagar, Hyderabad - 500 037 E-mail: chsr_mte@hotmail.com

Phone: 040- 23773526, 23777571 Fax: 040- 23771930

89. Meru Infrastructure (p) Ltd., J.15/65-C,Jaitpura(Auto sales building) G. T. Road, Alaipur, Varanasi-221002. Email: meru.ipl@gmail.com

Phone:0542-2210030,2210116 Fax: 0542-2213891 Mobile: 9919977888 Mr. Ashok Sinha

90. Motor Industries Co. Ltd (for Bosch Tools) 4th Floor, YMCA Complex, 13, Rana Pratap Marg, Lucknow-226 001. Email:motorindustrieslko@rediffmail.com

Phone: 0522-2209363, 2209364 Fax: 0522-2209363

Page 48 of 55

91. Micron Engineering Industries, 89, Netaji Subhas Road (3rd Floor), Kolkata- 700001. Email: microncal@yahoo.com

Phone: 033-2243-1436 Mr. Sanjay Golcha Mob: 09830109746

92. Miranda Amsaw Ltd. Ashok Road, Kandivli (East) Mumbai - 400 101 E-mail: mt_mktg@vsnl.com

Phone - 022-28876308/4309/7841 Fax: 022-28879020, 28866747

93. Mitutoyo South Asia Pvt Ltd. C-122, Okhla Industrial Area, Phase-I New Delhi – 110020 Email:delhi@mitutoyoindia.com

Phone: 011-26372090 Fax: 011-26372636

94. Mining Machinery Company 545, GT Road (South), 4th Floor, Howrah – 711 101. Email:miningmach@hotmail.com

Phone: 033-2650-7688, Mob: 09830266028

95. Mitsubishi Heavy Industries India Precision Tools Ltd., No.-2,SIPCOT Industrial Complex, Ranipet-632 403(Tamilnadu). Email: tools@mhi-ipt.inWeb:www.mhi-ipt.in

Phone: 04172-244362 Fax-04172-24485

96. Motherson Advanced Tooling Solutions Ltd., A-3,M.I.D.C. Industrial Area, Chikalthana, Aurangabad-431 006.(Maharashtra) Email: dftl@vsnl.com Web.: www.motherson.com

Phone: 022-25882540 Fax: 022-25882540 Phone: 0240-2485217/8/9. Fax: 0240-2484363.

Motherson Advanced Tooling Solutions Ltd., Flat No.- 404,Natraj Aloka Garden Apartment, Marine Drive Road,Kadma, Jamshedpur-831 005. Email: skhalder@mats.motherson.com

Phone- 09534097303

97. Nikunj Eximp Entrprises Pvt. Ltd, 355, Angel Plaza, 14, West Patel Nagar, Main Patel Nagar Road, New Delhi – 110 008. Email: info@nikunjgroup.comWeb: www.nikunjgroup.com

Phone: 011-2588 6758/55 Fax: 011-2588 3298

98. Niran Tools & Machinery 4, Radha, Teli Gali, Andheri(East), Mumbai – 400 069. Email:niran@bom3.vsnl.net.in

Phone – 022-26823356, 26823347, 26831250 Fax: 022-26822556 ,Contact Person – Mr. N.S. Rangan

99. Neha Enterprises 33/153/180, Gaya Prasad Lane, Kanpur – 208 001. Email: neha_enterprise@rediffmail.comNeha.enterprises2@gmail.com

Phone: 0512-2310008, Fax: 0512-2310008 Mob: 07505759213 Mr.Sanjay Rawat

Page 49 of 55

100. Oriental Engineering Works Pvt Ltd, Yamuna Nagar – 135 001, Haryana (India). Email:info@oewin.com sales@oewin.com

Phone: 01732 – 251750, 290750 Fax: 01732 – 251757, 290999

101. Patel Engineering Tools Corporation 40, Strand Road, 1st Floor, Room No. 12, Kolkata - 700 001 Email: petco_cal1967@yahoo.com

Phone: 033-2243-1223 Fax: 033-22686979

102. Perfect Engg. Works, 104,Baldev Park,Near Musical Fountain, Parwana Road, Delhi-110051. Email: singh.harjeet37@yahoo.com

Phone: 011-22528124 Mr. Harjeet Singh

103. PES Hydraulics (India) Pvt. Ltd., Plot No.-15,Phase-II,Industrial Estate, Yamuna Nagar-135001(Haryana) Email: pesynr@gmail.compes_ynr@yahoo.co.in

Phone: 9315150278 01732-250278 Mr.N. K. Tyagi.

104. Powermaster Engineers Private Limited, 347, Shah & Nahar Ind. Etate, Dhanraj Mill Compound, Lower Parel(W), Mumbai - 400 013. Email: sales@tubeexpander.com

Phone: 022-24942965, 24945617

105. Precomp Tools Pvt. LtdPlot No. 108-D, Ranje Taluka- Bhor, Pune - 412 205. E-mail: marketing@precomptools.com

Phone: 020-808941, 808942 Fax: 020-808028

Phone: 02113-305600. Fax: 02113-305610.

106. Prime Precisions Pvt Ltd, E-22, Panki Industrial Area, Site-II Kanpur-280 022. Email:sales.precision@prime-india.net

Phone: 0512-2691129, 2691130

107. Precision Engineers 923-A, Industrial Area, Phase-II, Chandigarh – 160002. Email:precision@glide.net.in Precision_chdeyahoo.co.in

Phone: 0172-2652018, Fax: 0172-2642587

108. Prime Marketing Agencies E-22, Site-II, Panki Industrial Area Kanpur – 208 001 Email: dheeraj.singh@prime-india.netEmail: sales.marketing@prime-india.net

Contact Person: Mr. Dheeraj Singh.mob-9839184817. Phone: 0512-2691129,3295319 Fax-0512-2691129. Bhasin, Mob:9335089838

109. PRECISION ENGG. CONCERN, 254/2/1 PANCHANANTALA ROAD, HOWRAH-711101. Email:pec8888@gmail.com

Phone: 033-

Page 50 of 55

110. Precision Tooling Systems Ltd., P.O.- Sattur, Dharwad- 580002. Email:precision_tsl@rediffmail.com

Phone: 0836-2348703, 2347640 Fax: 0836-2347637

111. Precise Tools 568, Indurtrial Area, Phase-II, Chandigarh – 160 002. Email:precisiontools@gmail.com

Phone: 0172-2642752 09814017294 J S GOGAL

112. Quicloc (P) Ltd 1/49, G.D. House, Bendre Nagar, Subramanya Pura Road, B.S.K., 2nd Stage (Post) Bangalore-560 070. Email: marketing@quicloc.com

Phone: 080-26668822/23/24/25/26 Fax: 080-26660783

113. Rapicut Carbides Limited 119, GIDC, Industrial Area, Ankleshwar-393002 Gujrat . Email:rapicutad1@sancharnet.in

Phone: 02646-251118, 221071

114. R. S. Enterprises LIG-1296, Awas Vikas Colony, Panki Kalyanpur Road, Kanpur – 17. Email:rse_knp@sify.com

Phone: 0512-2511271 Mob: 9415043665

115. Rohm Clamping Technologies Pvt Ltd, HO #312, 5’A’ Main 3 “C” Cross HRBR Block-II, Kalyan Nagar, Bangalore – 560 043. Email: kthomas_64[at]yahoo.com

Phone: 080-25428715/8717 Fax: 080-2542 8858

116. Ravi Supply Agency 5/1, Clive Row (3rd Floor, Room No. 60) Kolkata - 700 001. Email:ravisupply@yahoo.com

Phone- 033-2220-7597 Fax : 033-22207597 Mob: 09830748549 Mr. G.D. Mohta

117. S.K. Beri & Brothers A-119, Okhla Industrial Area, Phase - II New Delhi - 110 020 E-Mail: berry@nde.vsnl.net.in

Phone – 011-26912177, 26315033, 26840286 Fax: 011-26829812, 2462-8275

118. Seco Tools India (P) Ltd, 306, Ansal Tower, Nehru Place, New Delhi – 110 019. Email:seco.delhi@secotools.com Ramji.tiwari@secotools.com

Phone: 011-2621 7388 Fax: 011-2641 6119

119. S.S. Enterprises 128/5, Hazra Road (West Of Hazra Park) Kolkata - 700 026 E-Mail: ssent@india.com

Phone – 033-2455-4446, 2455-5096 Fax: 033-24554446

120. SMC Pneumatics (India) Pvt Ltd D-107 to 112, Phase-II Extn., Noida – 231 301 Distt. Gautam Budhnagar – 201 305 (U.P.) India Email: smcpune@satyammail.com

Phone: 0118-4568730/31/32 Fax: 0118-4568933, 4563111

Page 51 of 55

121. Sameer Industrial Associate, SA. 2/398 D-5, Pandeypur, Varanasi Email: prem_sameer2947@rediffmail.com

Phone – 0542-2588322 Fax: 0542-2581513 Mob: 09838426980 Mr. Prem Narayan

122. Sharma Enterprises, C27/279A-2-12, Nirmal Complex, Maldahiya, Varanasi - 221 002. Email:sharmaenterprises@gmail.com

Phone: 0542-2356003

123. Shiballoy Multiflex Pvt Ltd 141, Sector A, Zone -B, New Industrial Estate Bhubaneshwar - 751 010 E-mail: shibaloy@dte.vsnl.net.in

Phone - 0674-2580504, 2580349 Fax: 0674-2581935

124. Sigma Industries, 76, HIDC, Industrial Estate, Sector – 31 Faridabad. Email:sigmatools@gmail.com

Phone: 0129-2287343 ,2274787 Fax: 0129-2287343

125. Size Control Gauges & Tools Pvt Ltd 218, Poornima Towers, 397 Shankarshet Road, Pune-411037. Email:sizecontrol@vsnl.com

Phone: 020-4445345, 4443486 Fax: 020-4443486

126. Size Master Gauges & Tools, Final Plot No. 77 & 78, Ramtekdi Industrial Estate, Hadapsar, Pune-411 013. Email: response@sizemasters.com

Phone: 020-26816167, 32506168 Fax : 020-26822263

Phone: +(91)-9890644445

Fax No: +(91)-(20)-26816167

127. Sonalkar Tool Works Pvt.Ltd., P.B. No. 24, Harihar- 577601 Email:guttal_sonalkar@rediffmail.com chuckindia@gmail.com

Phone: 08192-241166 Fax: 08192-241110 / 242169 Dinesh duttal 9341351011

128. Sri Sakti Trading Corporation(cal)11, Clive Row (4th Floor),Room no.-10A, Kolkata-700 001 Email: sstc@cal.vsnl.net.in

Phone: 033-2242-6311/9399Fax: 033-22429349 Mr. Kailash Mohta

129. S.S. Tools Sirhind Road Patiala - 147 001 E-mail: sstools@glide.net.ininfo@sstools.net

Phone: 0175 - 2351272, 2354272 Fax: 0175 – 2361272

130. M/S Sri Hans Energy Systems (P) Ltd., 301-A, Anand Tower, 117/K/13, Sarvodya Nagar Kanpur- 208025. Email:Saurabh@hansenergy.in

Gaurav@hansenergy.in.

Contact Person- Mr. Gaurav Pilania &

Mr. Saurabh Pilania Phone No. – 0512-2502323, 09453042482, 09336833783

Page 52 of 55

131. Swarn Enterprises 110/76-Kha, Naya Gaon (East) Near Sri Ram Road Crossing, Latouche Road Lucknow-226001. Email: swarnenterprise@sify.com

Phone: 0522-2221886, Mob- 9415004567, 9415402236 Fax No: 0522-2272268 Mr. Deepak Sehgal

132. Sterling Abrasive Ltd. Plot No. 45/46, G.I.D.C, Odhav Road, Ahmadabad- 382415 E-mail: sales@sterlingabrasives.com

Phone: 079- 22870905, 22870907 Fax: 079-22974102

133. Swapnil Enterprises,Kanpur Plot No.-3,Colony No.-1,VIP Gali,Near Astha Hotel,Sahkar Nagar,Maswanpur,Kanpur Nagar-208109. Email: swapnil.enterprises@rediffmail.com

Phone: 9935241786 9005557874.

134. Swastick Enterprise 13, Noormal Lohia Lane, 3rd Floor Kolkata- 700 007. Email:swastickent@yahoo.co.in

Phone – 033-2232-4505 Fax: 033-22319402

135. Shiv Hardware & Mill Stores Plot No 275, Shivdaspur, PO – Manduadih (Industrial Estate Road), Varanasi-221 003. Email: shivhardware1986@gmail.com

Mob: 09415619687 Fax-0542-2371687 Mr. Shiv Lal Gupta

136. SMJ Marketing Pvt Ltd., 21-22,2nd floor,Manisha Blitz , Pune Sholapur Road Pune – 411 013. Email:smj@vsnl.com

Phone- 020-2681621 Fax – 020-26816213

137. Super Threading (India) Pvt Ltd, C-138, Focal Point, Phase-V, Ludhiana. Email:stitools@satyam.net.in info@superthreading.com

Phone:0161-2670990,2671984 Fax: 0161-2671998

138. Sagar Associates C-32B, Site-1, Panki Industrial Area, Kanpur – 208 002. Email: sagarassociates@sify.comsagarassociates@gmail.com

Phone: 0512-2691487 Fax: 0512-2550918 Mob: 9839067422 Saurabh Agarwal

139. Sandvik Asia Ltd, Mumbai-Pune Road, Dapodi, Pune-411 012. Email:coromantindia.customerdesk@sandvik.com

Fax No: 020-27147031 27145736

140. Saluja Machinery Co. 41, Bhagat Singh Market, Latouche Road, Kanpur-208 001. Email:nigamsm@gmail.com salujamachineryco@rediff.com

Phone: 0512-3095952 0512-3014625 Mob: 9415045260

Page 53 of 55

141. Steel & Hardwares K-63/164 , Lohatia Varanasi – 221001. Email:steel_hard@rediffmail.com

Phone: 2414316 Mob: 945172550

142. Shree D. G. sons HIG-248, Ratan Lal Nagar, Kanpur-208022. Email:sdg_sons@hotmail.com

Phone: 0512-3240031 Fax: 0512-2200259

143. Sri Prakash Industrial Corporation 21D, Canning Street, Ground Floor, Kolkata-700 001. Email: sriprakash_ind@sify.comSriprakash_ind@hotmail.com

Phone: 033-22300776

144. Sri Ram Tool (India), Plot No.-55A,Vishwakarma Industrial Complex, Mujessar, Faridabad-121005(Haryana). Email:mctool02@gmail.com

Phone:0129-4024936,940 9899106789,9953476789 Mr. Rajender Parshad

145. T.H.Habib & Co. 67-B, N.S. Road, P.O. Box No. 34 Kolkata - 700 001 E-mail: thhabib@cal.vsnl.net.in

Phone: 033-243 3278, 243 1308, 210 5548 Fax: 033 - 243 2954

146. Techno Qualities Shop No. 37, Momia Market, Pratap Ganj, Vijay Nagar, Kanpur-208012 Email: technoqualities@india.com

Ph 0512-2224235,2239482 Fax: 0512-2239482 Mob:9235773492,9839894452 Mr. Ajay Mandal

147. Tools & Dyne 4A, Nazrul Sarini Kolkata-700 008. Email: toolsanddyne@gmail.com

Phone: 033-2494-1117 Fax: 033-2447-2832

148. Tool Tech Enterprises, GC-22/C-8,Kailash Vihar Avas Vikas Scheme No.-1, Kalyanpur, Kanpur-208017. Email:tooltech.entp@rediffmail.com

149. Tools & Tools (India) 5/1, Clive Row ( 3rd Floor) Kolkata - 700 001. Email: dhuwalia@yahoo.com

Phone: 033-22204900, 22103516/17 Fax: 033-22203342, 22204501. Mob: 9831681717,9331054634. Mr. Natwar Dhuwalia

150. Total Solutions GC-22/C-8 Kailash Vihar, Avas Vikas, Scheme No.1, Kalyanpur, Kanpur-208017. Email: lks@total-solution.co.in

Mob:9335837441 Fax No: 0512-2574221

Page 54 of 55

151. Tristar Industrial Tools (P) Ltd Plot No. 268, Pandey Industrial Estate Pokharan Road No.1, Upvan Thane - 400 606 E-mail: info@tristarindia.com

Phone: 022-25414475, 25349973 Fax: 022-25347937

152. Tube Expansion Equipments Private Limited (Teep) Plot No. 32, Sector 1, Industrial Estate, Parwanoo, Himachal Pradesh - 173 220. Email:tubeepl@gmail.com

153. TaeguTec India Pvt Ltd Plot No: 119 & 120 Bommasandra Industrial Area, Phase-4, Bangalore – 560099. Email:sales@taegutec.india.com

Phone: 080-7831870 080-27839111. Fax: 080-7831869 080-27839123.

154. Trumax Machine Tools Pvt Ltd, “Trumax House” Dr, Vikram Sarabhai Road, Rajkot – 360 004. (Guj) Email: trumax_ad1@sancharnet.in

Phone: 0281-2388512, 2388881, 2368585 Fax: 0281-2457817

155. Unique Industries (India) C-10, Focal Point, Jalandhar-144 004. Email : unique@jla.vsnl.net.in

Phone: 0181-2602296, 5085575 Fax: 0181-2600680

156. V Weld Equipments 3/6, Gorwa Industrial Estate Vadodara - 390 016 E-mail: vequip@ad1.vsnl.net.in

Phone: 0265-2380377 Fax: 0265-2381762 / 2481107

157. Vankos & Company 13/2, Industrial Estate, Patna-800 013. Email:support@vankos.com

Tel: 0612-2262693, 2262455, 2262838 Fax: 0612-2262902 Mob: 09334048263

158. Ved Sassomeccanica (India) Pvt. Ltd D - 18/1, Panki Industrial Area, Site-I Kanpur - 208 022 E-mail: vedsasso@rediffmail.com

Phone: 0512-2692498 Fax: 0512-2691317

159. Verma Enterprises, 3214/A-1, Ram Bazar, Mori Gate, Delhi- 110006 E-mail: vermaent@del3.vsnl.net.in

Phone: 011- 23958652 Fax: 011-23981662

160. Vijay Industrial Equipments Co.2A, Ganesh Chandra Avenue,Commerce House,Room no.- 6A,2ND Floor, Kolkata - 700 013. E-mail: vieco@cal.vsnl.net.in

Phone – 033-22132683, 24785981 Fax: 033-22132141.

Page 55 of 55

161. Vijay Air Control 44/A, Ist floor, 59th ‘A’Cross, 4th ‘N’ Block, Rajajinagar Bangalore – 560 010. E-Mail: marketing@vacpneumatic.in

Telefax: 080-23120871, 23121136, 23128871

162. VBS Engineering & Chemicals11, Sripad Prasad Duplex, Opp. Yash Complex, Behind nuclear park, 30MTR VUDA Road, Gotri Road, Vadodara – 390 023(Gujrat). Email:vbsengg@dataone.in

Telephone: 0265-6542695, 2340934. 09825705672.

163. Vibha Technologies Ltd, Guru Prasad, 1/13th”B” Cross Vyalikaval, Bangalore. Email:vibha_technology@rediffmail.com

164. Vimal Vinod & Co. 78/46, Latouche Road, Kanpur-208001. Email:vimalvinod1@yahoo.co.in Email:vvcknp@gmail.com

Phone: 0512-2316427, 2306946 Fax: 0512-2308136

165. Wendt (India) LimitedPlant: 69/70, Sipcot Industrial Complex Hosur – 635 126 Krishnagiri District (Tamil Nadu) Email: wil@wendtindia.com

Phone: 04344-276851, 276852, 276254 Fax: 04344-276853, 276253 Phone: 04344-405500/501. Fax: 04344-405620/630.

166. Walter Tools India Pvt Ltd., Mumbai-Pune Road, Dapodi, Pune – 411 012 Email: info.india@walter-tools.com

Phone: 020-27145028 Fax: 020-27148775 Mr.Tanmay Tripathy 9386370750

167. Yuken India Ltd, P.B. No 16, Whitefield Road, Whitefield Bangalore-560 066. Email:info@yukenindia.com

Phone: 080-28452088, 28452262 Fax: 080-28451560, 28452261

168. YG-1 Industries India Pvt Ltd., HO – A-306, Road No. 32, Wagle Industrial Estate, Thane(W) – 400 604. Email:trade@yg1india.com

Phone: 022-25804059, 65743070 Telefax: 022-25803576 Mob: 09967975685

169. Zawar Gauges & Tools (Pvt) Ltd, S-25, Kalagar Building, Parvati Industrial Estate Pune-Satara Road, Pune-9. Email: zawarg@vsnl.com ,zawargauges@gmail.com

Phone: 020-4224413, 4222832 Fax: 020-4221920