Tools Handheld Power Tools
Side Loading Grabs and lots more besides
>
www.pannkoke.com
Pannkoke Flachglastechnik GmbH is a company specialising in manufacturing systems engineering for equipment, machines and tools in the glass processing industry. Our medium-sized engineering company was founded in 1900.
Our customers who have been implementing our products for decades, are our main criterion for the quality of our products.
Please ask for information on our extensive production and delivery programme. Machines for cutting flat glass • from manual to CNC-Machine Vacuum lifting and holding technology • for lifting, holding and transporting
concrete, glass, plastics, metal, stone or lead blocks at temperatures of up to 200° C
• vacuum transporting equipment for roof and wall panels used in industrial construction
Tools • suction handles, tools and equipment for the
processing and handling of flat glass:
Glass off-loading frame Protective clothing Hacking knives Glazier table Badger hair brush Diamond drill Mini diamond circular saw Etching ink Glass breaking pliers Glass rack Glass scraper Glass cutter Glass-cutting equipment Putty knife
Small-size machines Art glazier's tools Plate glass carriage Measuring devices Vertical storage rack Red marten brush Suction handles Cutting wheel Segmented glass drill Safety suction handles Transporting equipment Glazing equipment Water rinsing head
You can contact us at Telephone: 0049 (0)451 / 47008-0 Telefax: 0049 (0)451 / 47008-37 email: [email protected] www.pannkoke.com
Tools-Catalogue.doc 09.08.2006 2/2
Address: Postfach 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Fax: +49 451 47008-37 Internet: http://www.pannkoke.com
Product Groups Survey
Which product group do you require? We’ll send you further information!
Group
Glass Racks, -Glass Stands Parts for the Shop Floor – Transport Rope Frame Felt and Distance Pads Transport Cases
2
4
Transport Devices – Glass Hand Carrier Carrying Belts – Hand and Safety Suction Handles 3
Glazing Tools Glass Breaking Pliers – Putty Knives Working Protection – Scraping Blades
5
0-1_Product Groups Survey.doc 01.08.2006 Subject to changes. 1/3
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Product Groups Survey
Which product group do you require? We’ll send you further information!
Group
Cutting Equipment – Cutting and Break-Out Bars Glass Cutter – Cutting Wheels – Cutting Emulsion Measuring Tools – Marking Chalk and Tools
7
Drilling Machines – Drilling Stands Hand Grinding Machines Small Machines and Accessories
8
Glass Drills and Accessories – Polishing Disks Grinding and Polishing Belts for wet grinding 9
Art Glaziers
Tools and Devices 10
0-1_Product Groups Survey.doc 01.08.2006 Subject to changes. 2/3
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Product Groups Survey
Which product group do you require? We’ll send you further information!
Group
Vacuum Technique 11
Cutting Technique 12
0-1_Product Groups Survey.doc 01.08.2006 Subject to changes. 3/3
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Table of Contents
Description Item-No. Group Page
Glazier Table 432 2
Glass Offloading Frame 601/5 2
Glass Offloading Frame 601-BAND 2
Glass Offloading Frame 607 2
Glass Rack 482L 2
Support profile 321 2
Soft rubber strips 326 2
Castor roller 330 2
Cork distance pads 351 2
Plate glass carriage 496 3 Transport equipment 1
GeRO Glass hand carrier, movable 374/GERO50 3 Transport equipment 2
Glass hand carrier doppelseitig 374/D50 3 Transport equipment 2
Shoulder belt 560-D 3 Transport equipment 3
Double grip belt 565 3 Transport equipment 3
Hand belt 567 3 Transport equipment 3
Support block 238 3 Transport equipment 4
Corner shoe 373 3 Transport equipment 4
Spare suczion cup 385/ES120 3 Transport equipment 4
Tragkuli 277 3 Transport equipment 5
Tragboy 276 3 Transport equipment 5
Handlap 410-1.6 3 Transport equipment 5
Safety Suction Handle 295 3 Safety suction handles 1
Transport case 295-K 3 Safety suction handles 1
Safety Suction Handle 293 3 Safety suction handles 1
Safety Suction Handle PALUE 384 3 Safety suction handles 2
Power-Grip 284 3 Safety suction handles 2
Power-Grip 284-KU 3 Safety suction handles 3
VERIBOR Suction lifter 286 3 Safety suction handles 3
Spare sucker 286-ES 3 Safety suction handles 3
Button suction cup 531 3 Suction handles 1
Lift-off suction cup 538 3 Suction handles 1
Suction head 537 3 Suction handles 1
0-2_TableOfContents.doc 25.01.2008 1/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Table of Contents
Description Item-No. Group Page
Stabilizing suction cup 375 3 Suction handles 2
flexible suction handle 535 3 Suction handles 2
VERIBOR Suction lifter 1-point 385/0 3 Suction handles 1
VERIBOR Suction lifter 1-point 385/0KU 3 Suction handles 1
VERIBOR Suction lifter 2-point 385/2 3 Suction handles 1
VERIBOR Suction lifter 2-point 385/2KU 3 Suction handles 1
VERIBOR Suction lifter 2-point - flexible
385/2G 3 Suction handles 2
VERIBOR Suction lifter 2-point - flexible
385/2GG 3 Suction handles 2
VERIBOR Suction lifter 2-point - angular
385/2WZ 3 Suction handles 2
VERIBOR Suction lifter 3-point 385/3 3 Suction handles 3
Spare sucker 385/ES110 3 Suction handles 3
Spare sucker 385/ES120 3 Suction handles 3
GREIF-ZU Suction lifter 1-point 386/1 3 Suction handles 1
GREIF-ZU Suction lifter 2-point 386/2 3 Suction handles 1
GREIF-ZU Suction lifter 3-point 386/3 3 Suction handles 1
Spare sucker 386/ES110 3 Suction handles 1
Hacking knife 21 5 Hacking knives etc. 1
Hacking knife DON CARLOS 25 5 Hacking knives etc. 1
Hacking knife DON CARLOS 25-G 5 Hacking knives etc. 1
Scratching knife 26 5 Hacking knives etc. 1
Ripping knife 22 5 Hacking knives etc. 1
Lath scissors LOEWE 367 5 Glazing equipment 1
Pin hammer 47 5 Glazing equipment 1
Splitting tool 551 5 Glazing equipment 2
Splitting tool 551-HO 5 Glazing equipment 2
Block lever 555-KU 5 Glazing equipment 2
Block lever 555-HOLZ 5 Glazing equipment 3
Plastic putty scraper 568 5 Glazing equipment 3
Scraping knife 569 5 Glazing equipment 3
Windshield tool 38 5 Glazing equipment 4
Windshield tool 38-ALU 5 Glazing equipment 4
0-2_TableOfContents.doc 25.01.2008 2/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Table of Contents
Description Item-No. Group Page
Windshield tool 38-HOLZ 5 Glazing equipment 4
Windshield tool pare loop for windshield tool
38-OESE 5 Glazing equipment 4
Cavity pliers 77 5 Glass breaking pliers 1
Off-set glass pliers 83 5 Glass breaking pliers 1
Parallel jaws 85 5 Glass breaking pliers 1
Parallel jaws 88 5 Glass breaking pliers 2
Glass pincing pliers 90 5 Glass breaking pliers 2
Wire glass pliers 100 5 Glass breaking pliers 2
Glass breaking pliers 200/4 5 Glass breaking pliers 3
Glass breaking pliers 716 5 Glass breaking pliers 3
Glass breaking pliers 81 5 Glass breaking pliers 4
3-point-pliers 81-20 5 Glass breaking pliers 4
Putty knives blunt, bent, continuous blade
0/18 5 Putty knives 1
Putty knives pointed blade
3 5 Putty knives 1
Putty knives bent, high polished, continuous blunt blade
6 5 Putty knives 1
Putty knives SWISS DESIGN
8 5 Putty knives 1
Putty knives pointed blade
10 5 Putty knives 2
Putty knives Swedish Design bevelled, continuous blade
12 5 Putty knives 2
Holder for blades 35 5 Glass scraper 1
Scraping blade box 36 5 Glass scraper 1
Glass scraper 34 5 Glass scraper 2
Spare blades 34-KL 5 Glass scraper 2
Sigla-knife 37 5 Glass scraper 2
Spare blades 37-KL 5 Glass scraper 2
Wrist protectors 557-F 5 Work protection 1
Handlap 410-1.6 5 Work protection 1
Glass carrying gloves 411-10 5 Work protection 2
0-2_TableOfContents.doc 25.01.2008 3/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Table of Contents
Description Item-No. Group Page
Glass carrying gloves 411-ST 5 Work protection 2
Leather apron – half size 246 5 Work protection 3
Double hand smoother 251 5 Work protection 2 1
Spare roller 251-EW150 5 Work protection 2 1
Hand rubbing stone 252 5 Work protection 1
Supporting blocks and spacers of knotless hardwood
720 6 Supporting blocks and spacers
1
Supporting blocks and spacers of polypropylene (PP)
725 6 Supporting blocks and spacers
1
Cutting slide Pannkoke 138
7 Glass cutting equipment 1
Spare slide 139 7 Glass cutting equipment 1
Spare slide 139-R 7 Glass cutting equipment 1
Plastic glazier’s square 205 7 Glass cutting equipment 2
Plastic glazier’s square 205-ST 7 Glass cutting equipment 3
Cutting and break-out bar 390 7 Glass cutting equipment 3
Profile glass cutting angle 398 7 Glass cutting equipment 4
Additonal plate for profile glass cutting angle
389-ZP 7 Glass cutting equipment 4
Round-edge template 224-A 7 Glass cutting equipment 4
Radius cutter 225 7 Glass cutting equipment 5
Ruler stop 394 7 Glass cutting equipment 5
Spring clamp 393-F 7 Glass cutting equipment 5
Circle cutting machine 230 7 Glass cutting equipment 5
Circle cutter 227 7 Glass cutting equipment 6
spare slide 231 7 Glass cutting equipment 6
Circle cutter 228 7 Glass cutting equipment 6
Spare lever 228-ES 7 Glass cutting equipment 6
Circle and oval cutting machine 232-20/120 7 Glass cutting equipment 6
Extension 232-VL 7 Glass cutting equipment 7
Spare wheel holder 232-ESK 7 Glass cutting equipment 7
Circle & oval cutter 233-10/40 7 Glass cutting equipment 7
Schneid- und Brechleiste 389 7 Glass cutting equipment 7
Glass cutter HOBBY LONGLIFE 52-424 7 Glass cutter 1
0-2_TableOfContents.doc 25.01.2008 4/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Table of Contents
Description Item-No. Group Page
Spare wheel holder 52-Rad-Trg 7 Glass cutter 1
Glass cutter 61-100 7 Glass cutter 1
Spare wheels 60-102 7 Glass cutter 1
Spare rosette 63-101 7 Glass cutter 2
HM Glass cutter 64-400 7 Glass cutter 2
Spare rosette 64-401 7 Glass cutter 2
Spare wheels 265-2.135 7 Glass cutter 2
MICRO-Glass cutter 61-2004 7 Glass cutter 2
Oil-Glass cutter 259-447.8 7 Glass cutter 3
Spare cutting head 259-447.1 7 Glass cutter 3
Oil-Glass cutter 261-448.8 7 Glass cutter 3
Spare cutting head 261-448.1 7 Glass cutter 3
TC-cutting wheels SILBERSCHNITT 265-2 7 Cutting wheels 1
TC-cutting wheels SILBERSCHNITT 265-3 7 Cutting wheels 1
Quick-release support MMK-SWH/SV 7 Cutting wheels 1
Spare axle MMK-HMA/SV 7 Cutting wheels 1
Installation aid MMK-MTH/SV 7 Cutting wheels 2
Plastic support 265.4 7 Cutting wheels 2
Plastic support 265-7 7 Cutting wheels 3
Plastic support 265-6 7 Cutting wheels 4
Plastic support 265-8 7 Cutting wheels 5
TC-cutting-wheels ACTIVE SILBERSCHNITT
270-3 7 Cutting wheels 6
Quick-release support MMK-SWH/FL 7 Cutting wheels 6
Spare axle MMK-HMA/FL 7 Cutting wheels 6
Cutting emulsion 50 7 Cutting emulsion 1
Cutting emulsion 50-BES 7 Cutting emulsion 1
Glass thickness measuring tool 66 7 Measuring tools 1
Glas-O-Meter 69-GO 7 Measuring tools 1
Spring tape measure PANORAMIC 67/3PAN 7 Measuring tools 2
Spring tape measure STANLEY 67/3ST 7 Measuring tools 2
Spring tape measure NICHOLSON 67/3.5 7 Measuring tools 2
Spring tape measure STANLEY 67/5F 7 Measuring tools 2
0-2_TableOfContents.doc 25.01.2008 5/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Table of Contents
Description Item-No. Group Page
Marking tool 53 7 for Marking 1
Marking tool 53-KU 7 for Marking 1
Marking chalk 130 7 for Marking 1
Etching ink 129 7 for Marking 2
Drilling stand 651 8/9 Drilling of glass 1
Water rinse head 655 8/9 Drilling of glass 1
Drill adapter R ½“ 132-10 8/9 Drilling of glass 1
Nipple joint 132 8/9 Drilling of glass 1
Suction ring 630 8/9 Drilling of glass 2
Suction ring 632 8/9 Drilling of glass 2
Suction ring 631 8/9 Drilling of glass 2
Drilling stand 651-FUSS 8/9 Drilling of glass 2
Segmented glass drill 134 8/9 Drilling of glass 3
Diamond segments 134 8/9 Drilling of glass 3
Diamond drill 136 8/9 Drilling of glass 5
Counter sink diamond 137-0/35 8/9 Drilling of glass 7
Drill powder 672 8/9 Drilling of glass 7
Abrasive stone 629 8/9 Drilling of glass 8
Pneumatic edge decoating equipment 444 8/9 Small size machines 1
Spare grinding disk 444-ES 8/9 Small size machines 1
Mini diamond circular saw with accumulator
823 8/9 Small size machines 2
Diamond saw blade 823-ES 8/9 Small size machines 2
Spare accumulator 823-A 8/9 Small size machines 2
Charger 823-Aufl. 8/9 Small size machines 3
Manual grinding machine MAKITA 802 8/9 Small size machines 3
Grinding belt 670 8/9 Small size machines 3
Cork polishing belt 676 8/9 Small size machines 3
Grinding file MAKITA 803 8/9 Small size machines 4
Grinding belt 671 8/9 Small size machines 4
Cork polishing belt 677 8/9 Small size machines 4
Cutting blade for compass saw 815 / 816 8/9 Accesorries for small-size machines
1
0-2_TableOfContents.doc 25.01.2008 6/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Table of Contents
Description Item-No. Group Page
Abrasive pencil 809 8/9 Accesorries for small-size machines
1
Diamond saw blade 823-ES 8/9 Accesorries for small-size machines
1
Grinding disk 444-ES 8/9 Accesorries for small-size machines
2
Grinding disk 442-ES 8/9 Accesorries for small-size machines
2
Grinding disk 442-V/ES 8/9 Accesorries for small-size machines
2
Gloss-paint for edges 664 8/9 for polishing 1
Lead knife DON CARLOS 101 10 for Art glazing 1
Lead knife DON CARLOS 104 10 for Art glazing 1
Lead knife DON CARLOS 503 10 for Art glazing 1
Lead burnisher 118 10 for Art glazing 1
Double-bladed pattern knife 122 10 for Art glazing 1
Spare blades 122-K 10 for Art glazing 2
Pattern shears 120 10 for Art glazing 2
Lead hammer 28 10 for Art glazing 2
Lead stretcher 445 10 for Art glazing 2
Lead nails 119 10 for Art glazing 3
Soldering iron ZEVA 173 10 for Art glazing 3
Round copper bit - hammer tip 184 10 for Art glazing 4
Round copper bit - both sides 185 10 for Art glazing 4
Round copper bit - pointed, round tip 187 10 for Art glazing 4
Round copper bit - pointed 188 10 for Art glazing 4
Round copper bit - forged on 189 10 for Art glazing 4
Thermo regulator 174 10 for Art glazing 5
Soldering tinn 121-65 10 for Art glazing 5
Stearin oil 117-1 10 for Art glazing 5
Soldering iron HOBBYKIT 2 176 10 for Art glazing 5
Tip Longlife 176-SG10 10 for Art glazing 5
Tip chisel shape 176-SG11 10 for Art glazing 6
Tip chisel special form 176-SG12 10 for Art glazing 6
Soldering iron PROFIKIT 100 178 10 for Art glazing 6
0-2_TableOfContents.doc 25.01.2008 7/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Table of Contents
Description Item-No. Group Page
Soldering tip - 45 degree 178-SG40 10 for Art glazing 6
Soldering tip - straight 178-SG41 10 for Art glazing 6
Soldering tip with groove 178-SG42 10 for Art glazing 6
Soldering tip - bent 178-SG43 10 for Art glazing 7
Soldering iron PROFIKIT 200 190 10 for Art glazing 7
Soldering tip - hammer tip 190-SG50 10 for Art glazing 7
Soldering tip - hammer tip 190-SG51 10 for Art glazing 7
Soldering tip - straight 190-SG52 10 for Art glazing 7
Soldering tip - bent 190-SG53 10 for Art glazing 7
Stand for soldering iron 175 10 for Art glazing 8
Universal holder 195-KH30 10 for Art glazing 8
Badger hair brush 161 10 for Glass painting 1
Coating brush 163 10 for Glass painting 1
Red marten brush 162 10 for Glass painting 2
Marking tool 53 10 for Marking 1
Marking tool 53-KU 10 for Marking 1
Etching ink 129 10 for Marking 1
Glass thickness measuring tool 66 10 Measuring tools 1
Glas-O-Meter 69-GO 10 Measuring tools 1
Spring tape measure PANORAMIC 67/3PAN 10 Measuring tools 2
Spring tape measure STANLEY 67/3ST 10 Measuring tools 2
Spring tape measure NICHOLSON 67/3.5 10 Measuring tools 2
Spring tape measure STANLEY 67/5F 10 Measuring tools 2
Glass cutter HOBBY LONGLIFE 52-424 10 Glass cutter 1
Spare wheel holder 52-Rad-Trg 10 Glass cutter 1
Glass cutter 61-100 10 Glass cutter 1
Spare wheels 60-102 10 Glass cutter 1
Spare rosette 63-101 10 Glass cutter 2
HM Glass cutter 64-400 10 Glass cutter 2
Spare rosette 64-401 10 Glass cutter 2
Spare wheels 265-2.135 10 Glass cutter 2
MICRO-Glass cutter 61-2004 10 Glass cutter 2
Oil-Glass cutter 259-447.8 10 Glass cutter
0-2_TableOfContents.doc 25.01.2008 8/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Table of Contents
Description Item-No. Group Page
Spare cutting head 259-447.1 10 Glass cutter 3
Oil-Glass cutter 261-448.8 10 Glass cutter 3
Spare cutting head 261-448.1 10 Glass cutter 3
Cutting slide Pannkoke 138 10 Glass cutting equipment 1
Spare slides 139 10 Glass cutting equipment 1
Spare slide 139-R 10 Glass cutting equipment 1
Plastic glazier’s square 205 10 Glass cutting equipment 2
Cutting and break-out bar 390 10 Glass cutting equipment 2
Circle cutter 228 10 Glass cutting equipment 3
Spare lever 228-ES 10 Glass cutting equipment 3
Circle and oval cutting machine 232-20/120 10 Glass cutting equipment 3
Extension 232-VL 10 Glass cutting equipment 3
Spare wheel holder 232-ESK 10 Glass cutting equipment 3
PALUE 3-point pliers 81 10 Glass breaking pliers 1
Grozing pliers 85 10 Glass breaking pliers 1
Grozing pliers 88 10 Glass breaking pliers 1
Glass pincing pliers 90 10 Glass breaking pliers 2
Glass run pliers 716 10 Glass breaking pliers 2
0-2_TableOfContents.doc 25.01.2008 9/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Group 2
www.pannkoke.com
Pannkoke Flachglastechnik GmbH is a company specialising in manufacturing systems engineering for equipment, machines and tools in the glass processing industry. Our medium-sized engineering company was founded in 1900.
Our customers who have been implementing our products for decades, are our main criterion for the quality of our products.
Please ask for information on our extensive production and delivery programme. Machines for cutting flat glass • from manual to CNC-Machine Vacuum lifting and holding technology • for lifting, holding and transporting
concrete, glass, plastics, metal, stone or lead blocks at temperatures of up to 200° C
• vacuum transporting equipment for roof and wall panels used in industrial construction
Tools • suction devices, tools and devices for processing and handling flat glass
This group comprises:
Glass Loading Frame Supporting Buffer Supporting Block Supporting Profile Glazier Table
Glass Rack Cork Distance Pads Ball Castor Vertical Storage Rack Foam Rubber Strips
You can contact us at Telephone: +49 / (0)451 / 47008-0 Telefax: +49 / (0)451 / 47008-37 email: [email protected] www.pannkoke.com
2-0_Group_2.doc 05.08.2006 2/2
Address: Postfach 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Fax: +49 451 47008-37 Internet: http://www.pannkoke.com
Bauglastisch 432 für den universellen Einsatz zum manuellen Schneiden und Brechen für eine maximale Glasgröße von 1600 x 2500 mm 1600 x 3000 mm für den Transport zerlegbar
Glazier Table for multi purpose operation of manual cutting and breaking-out für maximum glass sizes of 1600 x 2500 mm 1600 x 3000 mm collapsible for transport
2-01_432.doc 05.08.2006 Änderungen vorbehalten 1/2
Description: table top manually tiltable covered with black nylon felt table top lockable at 45° dismountable table chassis made of rectangular tube 3 hingeable glass support blocks movable on 2 swivel wheels table height: 0,85 m colour: red mounting of any kind of cutting bridge not possible without air cushion without castor rollers
Querbrechleiste
für Glasgröße ohne 1 Stück
in der Mitte Eigengewicht Best.-Nr.
vertical break-out bar
for glass size without 1 piece
in the middle dead weight Item-No.
X 240 kg 920-432-0010 1,6 x 2,5 m
X 245 kg 920-432-0015 X 290 kg 920-432-0020
1,6 x 3,0 m X 295 kg 920-432-0025
Beschreibung: manuell kippbare Tischplatte mit schwarzem Kunststofffilz belegt Tischplatte auf 45° arrettierbar zerlegbares Tischgestell aus Rechteckrohr 3 abklappbare Glasaufstellklötze fahrbar durch 2 hintere Schwenkräder Tischhöhe: 0,85 m Lackierung: rot kein Schneidbrückenanbau möglich ohne Luftbahn ohne Rollbahn
2-01_432.doc 05.08.2006 Änderungen vorbehalten 2/2
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Abladegabel 601/5 zum Transport kompletter Glaspakete 5,0 t Tragfähigkeit maximales Glasformat 3300 x 6100 mm minimales Glasformat 2200 x 4600 mm 5,8 t Tragfähigkeit maximales Glasformat 3300 x 6100 mm minimales Glasformat 2200 x 3000 mm
Glass Offloading Frame 601/5 for transport of complete glass packages 5,0 t carrying capacity maximum glass size 3300 x 6100 mm minimum glass size 2200 x 4600 mm 5,8 t carrying capacity maximum glass size 3300 x 6100 mm minimum glass size 2200 x 3000 mm
2-02_601_5.doc 01.08.2006 Änderungen vorbehalten 1/2
Description: adjustable suspension eye for changing point of gravity upper supporting claws height adjustable via gliding bar 2 foot claws 800 mm sideways adjustable without using any tools glass loading feet with hard wood layer loading depth max. 20 cm supporting bars with rubber layer colour: yellow Accessories: sideways holding claws for 3 mm glass thickness to be fitted even at a later stage Glass Offloading Frames for other glass sizes upon request
Beschreibung: verstellbare Aufhängeöse zum Variieren der Schwerpunktlage obere Halteklauen höhenverstellbar über Schubstange 2 Fußklauen seitlich um 800 mm verschiebbar kein Einsatz von Werkzeug erforderlich Glasaufstellfüße mit Hartholzauflage für max. 20 cm Glasauflage Gummi-Anlageflächen Farbe: gelb Zusatzteil: seitliche Halteklauen für 3 mm Glasdicke nachträglicher Anbau möglich Abladegabel für andere Glasgrößen auf Anfrage
seitliche Halteklauen Tragkraft Eigengewicht obere Halteklauen ohne mit Best-Nr.
sideways holding claws carrying capacity dead weight
upper holding claws without with Item-No.
450 kg 3 X 601/5-0010 5,0 t
485 kg 3 X 601/5-0015 480 kg 4 X 601/5-0020
5,8 t 515 kg 4 X 601/5-0025
Seitliche Halteklauen zum nachträglichen Anbau sideways holding claws for later fitting la/2-00313
1 Gummianlage rubber layer
2 max. Glasauflage max. loading depth
3 Hartholzauflage hard wood layer
4 Glasaufstellfuß glass loading foot
1 verstellbare Aufhängeöse adjustable suspension eye
2 Glaspaketdicke thickness of glass package
3 Halteklaue holding claw
2-02_601_5.doc 01.08.2006 Änderungen vorbehalten 2/2
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Größe I – Size I
A = 2200 mm B = 2660 mm C = 2550 mm D = min. 1200 mm max. 1880 mm
Größe II – Size II
A = 2660 mm B = 2860 mm C = 2550 mm D = min. 1520 mm max. 2320 mm
Abladegabel 601-BAND zum Transport kompletter Glaspakete 3,0 t Tragfähigkeit Größe I maximales Glasformat 2550 x 3210 mm minimales Glasformat 1200 x 2200 mm Größe II maximales Glasformat 2550 x 4600 mm minimales Glasformat 1200 x 2600 mm
Glass Offloading Frame 601-BAND for transport of complete glass packages 3,0 t carrying capacity Size I maximum glass size 2550 x 3210 mm minimum glass size 1200 x 2200 mm Size II maximum glass size 2550 x 4600 mm minimum glass size 1200 x 2600 mm
2-03_601-BAND.doc 01.08.2006 Änderungen vorbehalten 1/2
Description: adjustable suspension eye for changing point of gravity 2 upper supporting claws height adjustable via gliding bar 2 foot claws 680 mm sideways adjustable without using any tools glass loading feet with hard wood layer loading depth max. 20 cm supporting bars with rubber layer colour: yellow Glass Offloading Frames for other glass sizes on request
Beschreibung: verstellbare Aufhängeöse zum Variieren der Schwerpunktlage 2 obere Halteklauen höhenverstellbar über Schubstange 2 Fußklauen seitlich um 680 mm verschiebbar kein Einsatz von Werkzeug erforderlich Glasaufstellfüße mit Hartholzauflage für max. 20 cm Glasauflage Gummi-Anlageflächen Farbe: gelb Abladegabel für andere Glasgrößen auf Anfrage
Tragkraft Eigengewicht maximale Größe obere Halteklauen Best-Nr.
carrying capacity dead weight maximum size upper holding
claws Item-No. 220 kg 2550 x 3210 mm 2 601-Band-0010
3,0 t 240 kg 2550 x 4600 mm 2 601-Band-0015
1 Gummianlage rubber layer
2 max. Glasauflage max. loading depth
3 Hartholzauflage hard wood layer
4 Glasaufstellfuß glass loading foot
1 verstellbare Aufhängeöse adjustable suspension eye
2 Glaspaketdicke thickness of glass package
3 Halteklaue holding claw
2-03_601-BAND.doc 01.08.2006 Änderungen vorbehalten 2/2
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
2-04_607.doc 01.08.2006 Änderungen vorbehalten 1/2
Abladegabel 607 für den Gabelstaplerbetrieb zum Transport kompletter Glaspakete 3,0 t Tragfähigkeit maximales Glasformat 2500 x 3210 mm minimales Glasformat 1200 x 2200 mm
Glass Offloading Frame 607 to be used on a fork lift for transport of complete glass packages 3,0 t carrying capacity maximum glass size 2500 x 3210 mm minimum glass size 1200 x 2200 mm
Gummianlage
rubber layer 2 max. Glasauflage
max. loading depth 3 Hartholzauflage
hard wood layer 4 Glasaufstellfuß
glass loading foot
Description: for mounting to the fork carrier FEM II other suspensions on request unscrewable lifter for easy mounting of the Offloading Framer upper supporting claws height adjustable via gliding bar 2 foot claws 800 mm sideways adjustable without using any tools glass loading feet with hard wood layer loading depth max. 20 cm supporting bars with rubber layer colour: yellow Accessories: sideways holding claws hydraulic operated for 3 mm glass thickness Therefore the fork lifter must have an additional hydraulic control unit.
Beschreibung: zum Anbau an den Gabelträger FEM II andere Aufhängungen auf Anfrage abschraubbare Nocken zur einfachen Montage der Abladegabel obere Halteklauen höhenverstellbar über Schubstange 2 Fußklauen seitlich um 800 mm verschiebbar kein Einsatz von Werkzeug erforderlich Glasaufstellfüße mit Hartholzauflage für max. 20 cm Glasauflage Gummi-Anlageflächen Farbe: gelb Zusatzteil: seitliche Halteklauen hydraulisch betätigt für 3 mm Glasdicke Hierzu ist ein zusätzlicher hydraulischer Steuerkreis im Stapler erforderlich.
1 Glaspaketdicke thickness of glass package
2 Halteklaue holding claw
3 Gummianlage rubber layer
4 max. Glasauflage max. loading depth
5 Hartholzauflage hard wood layer
6 Glasaufstellfuß glass loading foot
2-04_607.doc 01.08.2006 Änderungen vorbehalten 2/2
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
2-05_Iso-Gabel.doc 01.08.2006 Änderungen vorbehalten 1/2
ISO-Gabel / ISO-Frame
2-05_Iso-Gabel.doc 01.08.2006 Änderungen vorbehalten 2/2
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
2-06_482L_GB.doc 05.08.2006 subject to changes 1/2
Glass Rack 482 L Built your glass rack according to the modular system Easy mounting – simple dismountable The single girders are plugged together to one rack in the required length via 3 connection tubes and are secured additionally via diagonal frames against lateral push. No glass breakage via rubber profile pieces Also solid and distorsion proof at one-sided load Solid without fastening at a perfect floor Available in 3 different heights and in each length up to maximum 6,00 m Glass layer per side 30 cm other glass layer lengthes on request
girder height 225 cm 250 cm 300 cm
depth of the foot (total width) 102 cm 115 cm 119 cm
weight each girder 482L-EB/... 36 kg 42 kg 49 kg
weight running meter set tubes 482L-R 8 kg 8 kg 8 kg
Static checked load table glass width
(height) Number of girder
1 2 3 4 5 6 7 8
2,00 m 5000 kg
10000 kg
15000 kg
20000 kg
25000 kg
30000 kg
35000 kg
40000 kg
2,60 m 3800 kg
7600 kg
11400 kg
15200 kg
19000 kg
22800 kg
26600 kg
30400 kg
3,30 m 3000 kg
6000 kg
9000 kg
12000 kg
15000 kg
18000 kg
21000 kg
24000 kg
Example of an order for a glass length of 4,5 m Rack length 4,00 m = 5 girders 482L-EB/... 1 set tubes 482L-R 4,00 m long or Rack length 4,50 m = 5 girders 482L-EB/... 1 set tubes 482L-R 4,00 m long Item-No. 482L-EB/225 A-girder 2,25 m high 482L-EB/250 A-girder 2,50 m high 482L-EB/300 A-girder 3,00 m high 482L-R set connection tube please state the tube length maximum 6 m lengthes available
Gummianlage
rubber layer 2 max. Glasauflage
max. loading depth 3 Hartholzauflage
hard wood layer 4 Glasaufstellfuß
glass loading foot
2-06_482L_GB.doc 05.08.2006 subject to changes 2/2
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Support Profile – suitable for the rectangular tube
as deflector, protecting pad and layer for glass and other sensitive materials mounting by slight hammer strokes made of soft rubber, black Item-No. 321-H hollow space profile with perfect spring quality 321-M solid Soft Rubber Strips black, self-adhesive and non-abrasive
Item-No. 326-30 30 x 4,0 mm – roll à 20,0 m 326-38 38 x 3,5 mm – roll à 20,0 m 326-50 50 x 3,5 mm – roll à 20,0 m Castor Roller made of solid rubber - 50 mm ∅ with nut M 14 x 1,5 Item-No. 3302-08_LBau_GB.doc 10.08.2010 Änderungen vorbehalten 1/2
2-08_LBau_GB.doc 10.08.2010 subject to changes 2/2
Address: Haendelweg 5 D-23556 Luebeck Germany Telefon: +49 451 47008-0 E-mail: [email protected] Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
2-09_351.doc 05.08.2006 Änderungen vorbehalten 1/2
Kork-Stapelscheiben eckig 20 x 20 mm selbstklebend – schwach haftend Einheit à 10.000 Stück Best.-Nr. 351-3 3,0 mm dick
Cork Distance Pads angular 20 x 20 mm self sealing – soft adhesive unit à 10.000 pieces Item-No. 351-3 3.0 mm strong
2-09_351.doc 05.08.2006 Änderungen vorbehalten 2/2
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Group 3
www.pannkoke.com
Pannkoke Flachglastechnik GmbH is a company specialising in manufacturing systems engineering for equipment, machines and tools in the glass processing industry. Our medium-sized engineering company was founded in 1900.
Our customers who have been implementing our products for decades, are our main criterion for the quality of our products.
Please ask for information on our extensive production and delivery programme. Machines for cutting flat glass • from manual to CNC-Machine Vacuum lifting and holding technology • for lifting, holding and transporting
concrete, glass, plastics, metal, stone or lead blocks at temperatures of up to 200° C
• vacuum transporting equipment for roof and wall panels used in industrial construction
Tools • suction devices, tools and devices for processing and handling flat glass
This group comprises:
Lift-off Suction Cup Support Block Double Grip Belt Corner Shoe Flexible Suction Handle GeRO Glass Hand Transporter, mobile Glass Transporter GREIF-ZU Suction Lifter Hand Belt Wiping Cloth Case Transporter
Button Suction Cup Plate Glass Carriage Power Grip Suction Handles Suction Head Shoulder Belt Safety Suction Handles Stabilizing Suction Cup Tragboy Tragkuli Transporting Equipment VERIBOR Suction Lifter
You can contact us at Telephone: +49 / (0)451 / 47008-0 Telefax: +49 / (0)451 / 47008-37 email: [email protected] www.pannkoke.com
3-0_Group_3.doc 05.08.2006 2/2
Address: Postfach 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Fax: +49 451 47008-37 Internet: http://www.pannkoke.com
Lenkroller 496 Das ideale Gerät für die Baustelle Für jede Glasgröße von 250 - 600 cm, auch für Isolierglas In der Länge ausziehbar Für den Transport zerlegbar
Plate Glass Carriage 496 The ideal device for the construction site For any glass size of 250 - 600 cm, also for insulating glass Extractable in the length Collapsible for transport
3-01_496.doc 05.08.2006 Änderungen vorbehalten 1/2
Beschreibung: verstellbar von 250 – 400 cm für den Transport zerlegbar 2 unabhängig voneinander lenkbare Fahrgestelle mit hochgezogenen Deichseln leichter Lauf und gute Wendigkeit durch am Ende getragenes Gewicht der Scheibe 4 rollengelagerte Vollgummireifen 200 mm Durchmesser für 700 kg Tragfähigkeit 2 abnehmbare Stützen 180 cm hoch Glasauflage an jedem Ende 350 mm lang und 40 mm breit 110 mm über dem Boden Gewicht: ca. 50 kg Lackierung: gelb Bestell-Nr.: 496 Zubehör: Haltesauger 4 Stück erforderlich Bestell-Nr.: 375
Description: adjustable from 250 to 400 cm collapsible for transport 2 off independent steerable solid rubber wheel sets with upright draw bars very good rolling properties and maneuverability as pane weight is carried at each end 4 off roller beared solid rubber wheels 200 mm diameter for 700 kg max. load 2 off removable support rods 180 cm high glass support at each end 350 mm long and 40 mm wide 110 mm above ground dead weight: approx. 50 kg colour: yellow Item-No.: 496 Accessories: Support suction cups 4 pieces necessary Item-No.: 375
3-01_496.doc 05.08.2006 Änderungen vorbehalten 2/2
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
GeRo Das manuelle Plattentransportsystem für empfindliche Plattenmaterialien wie z. B. Glasscheiben
GeRo The manual plate transport system for sensitive plate material e. g. glass panes
3-02_GERO.doc 05.08.2006 Änderungen vorbehalten 1/2
Beschreibung: Zwei GeRo sind ein Plattentransportsystem, das sowohl ein Tragen als auch ein Fahren ermöglicht. z. B. zum Transport von Glastafeln oder Isolierglasscheiben auf der Baustelle. Für den Transport über Treppen sind die Auflageflächen drehbar gelagert, so passt sich die Auflagefläche dem Neigungswinkel an. Die rutschfeste Einlage schützt empfindliche Platten vor einer Beschädigung. Der Bügelgriff hat eine Höhe von 50 cm. Den GeRo gibt es für eine maximale Plattenbreite von 50 mm und 100 mm. Tragfähigkeit max. 100 kg Best-Nr. 374-GERO 50 Auflage
50 mm breit 374-RO10 Auflage
100 mm breit
Description: Two GeRo are a plate transport system, that enables carrying as well as moving. e.g. for transport of glass sheets or insulating glass panes on the site. For transport over stairs, the surface is turnable and it adapts to the inclination angle. The non-slip inlay protects the sensitive plates against damage. The handle has a height of 50 cm. The GeRo is available for a maximum plate width of 50 mm and 100 mm. Loading capacity max. 100 kg Item no. 374-GERO 50 rubber inlay
50 mm wide 374-RO10 rubber inlay
100 mm wide
3-02_GERO.doc 05.08.2006 Änderungen vorbehalten 2/2
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Transport Equipment
3-03_TransportEquipment.doc 13.02.2008 Subject to changes. 1/3
Item-No. Description
496 Plate Glass Carriage for 700 kg with 4 support suction cups 375
374/GERO50 GeRO Glass Hand Carrier movable for 100 kg with link and rolls 100 mm ∅ nonskid interlining height of handles 500 mm supporting surface 50 mm wide also suitable for insulating glass panes
374/D50 Glass Hand Carrier doppelseitig with feet for depositing nonskid interlining height of handles 500 mm supporting surface 50 mm breit also suitable for insulating glass panes
560-D Shoulder Belt made of hemp, 80 mm wide double-sided with adjustable strap buckle and leather chafe protection
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Transport Equipment
3-03_TransportEquipment.doc 13.02.2008 Subject to changes. 2/3
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Item-No. Description
565 Double Grip Belt made of Perlon with sliding protection length adjustable via turning also suitable for windows
567-40/145 Hand Belt with loops, made of hemp 40 x 2 x 1450 mm
567-40/165 40 x 2 x 1650 mm
567-80/145 80 x 2 x 1450 mm
567-80/165 80 x 2 x 1650 mm
238 Support Block made of wood/plastic with built-in suction cup (120 mm ∅) support 30 mm wide saves the 3rd man for placing under the blocks
373-30 Corner Shoe made of wood/plastic with built-in suction cup (120 mm ∅) 30 mm wide
373-50 50 mm wide
Transport Equipment
3-03_TransportEquipment.doc 13.02.2008 Subject to changes. 3/3
Item-No. Description
373-60 60 mm wide
385/ES120 Spare Suction Cup for corner shoe 385/2+3 with bolt and tilting lever
277 Tragkuli with 2 handles alos suitable for insulating glass maximum width 40 mm loading capacity 160 kg dead weight 2,2 kg
276 Tragboy with 1 handle usable for right and left maximum width 25 mm loading capacity 80 kg dead weight 0,9 kg
410-1.6 Handlap made of special natural crepe approx. 130 x 170 mm with thumb hole suitable for carrying of smooth materials also usable for releasing or tightening of lockings or screwings
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Visit our Internet-Page http://www.pannkoke.com Address: Postbox 26 54 D-23514 Luebeck Germany Telephone:+49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Fax: +49 451 47008-37 Internet: http://www.pannkoke.com
Sicherheits-Sauggriff 295 Der ideale Sauggriff zum vertikalen Tragen Maximale Tragkraft 50 kg bei 60 % Vakuum und 2-facher Sicherheit
Safety Suction Handle 295 The perfect suction handle for vertical carrying Maximum carrying capacity 50 kg at 60 % vacuum and doubly secured
3-04_295.doc 05.08.2006 Änderungen vorbehalten 1/2
Description: for all types of gastight material properties, even with slightly structural surface slight pressing for suction activating necessary on standing panes wear and tear resistant protected inner suction lip vacuum pump with approx. 4 pumping strokes approx. 60 % of max. vacuum is achieved vacuum tank with approx. 0,3 ltr reservoir guarantees long-lasting adhesion and safe suction on the surface control vacuummeter for reliable leak test dimension of suction cup 130 x 260 mm colour: yellow
Beschreibung: für alle luftdichten Flächen, auch mit leicht strukturierter Oberfläche bei stehenden Scheiben leichtes Andrücken zum Ansaugen erforderlich strapazierfähig – verschleißfest geschützt innenliegende Dichtlippe Vakuum-Zugpumpe mit ca. 4 Pumpenzügen werden ca. 60 % Vakuum erreicht Vakuum-Vorratsbehälter für ca. 0,3 l gewährt lange Dichtigkeit und sicheren Anpressdruck auf der Fläche Kontroll-Vakuummeter für Zuverlässigkeits-Dichtprüfung Saugerabmessung 130 x 260 mm Farbe: gelb
3-04_295.doc 05.08.2006 Änderungen vorbehalten 2/2
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Sicherheits-Sauggriff 293 Der ideale Sauggriff zum horizontalen Tragen Maximale Tragkraft 70 kg bei 60 % Vakuum und 2-facher Sicherheit
Safety Suction Handle 293 The perfect suction handle for horizontal carrying Maximum carrying capacity 70 kg at 60 % vacuum and doubly secured
3-05_293.doc 05.08.2006 Änderungen vorbehalten 1/2
Beschreibung: für alle luftdichten Flächen strapazierfähig – verschleißfest geschützt innenliegende Dichtlippe Vakuum-Zugpumpe mit ca. 4 Pumpenzügen werden ca. 60 % Vakuum erreicht Vakuum-Vorratsbehälter für ca. 0,2 l gewährt lange Dichtigkeit und sicheren Anpressdruck auf der Fläche Kontroll-Vakuummeter für Zuverlässigkeits-Dichtprüfung Saugerabmessung 380 x 82 mm Farbe: gelb
Description: for all types of gastight material properties wear and tear resistant protected inner suction lip vacuum pump with approx. 4 pumping strokes approx. 60 % of max. vacuum is achieved vacuum tank with approx. 0,2 ltr reservoir guarantees long-lasting adhesion and safe suction on the surface control vacuummeter for reliable leak test dimension of suction cup 380 x 82 mm colour: yellow
3-05_293.doc 05.08.2006 Änderungen vorbehalten 2/2
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Sicherheitssauger PALUE 384 Der ideale Sauggriff zum vertikalen und horizontalen Tragen Maximale Tragkraft 80 kg bei 60 % Vakuum und 2-facher Sicherheit
Safety Suction Handle PALUE 384 The perfect suction handle for vertical and horizontaly carrying Maximum carrying capacity 80 kg at 60 % vacuum and doubly secured
3-05_384.doc 05.08.2006 Änderungen vorbehalten 1/2
Description: for all types of gastight material properties, even with slightly structural surface slight pressing for suction activating necessary on standing panes wear and tear resistant protected inner suction lip vacuum pump with approx. 6 pumping strokes approx. 60 % of max. vacuum is achieved vacuum tank with approx. 0,3 ltr reservoir guarantees long-lasting adhesion and safe suction on the surface control vacuummeter for reliable leak test diameter of suction cup approx. 200 mm colour: yellow
Beschreibung: für alle luftdichten Flächen, auch mit leicht strukturierter Oberfläche bei stehenden Scheiben leichtes Andrücken zum Ansaugen erforderlich strapazierfähig – verschleißfest geschützt innenliegende Dichtlippe Vakuum-Zugpumpe mit ca. 6 Pumpenzügen werden ca. 60 % Vakuum erreicht Vakuum-Vorratsbehälter für ca. 0,3 l gewährt lange Dichtigkeit und sicheren Anpressdruck auf der Fläche Kontroll-Vakuummeter für Zuverlässigkeits-Dichtprüfung Saugerdurchmesser ca. 200 mm Farbe: gelb
3-05_384.doc 05.08.2006 Änderungen vorbehalten 2/2
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Safety Suction Handles
3-06_SafetySuctionHandles.doc 31.03.2011 Subject to changes. 1/3
Item-No. Description
295 Safety Suction Handle 295 suction cup dimensions 130 x 260 mm loading capacity 50 kg (vertical) with control vacuummeter approx. 0,3 l vacuum tank suction lip and sealing lip inside
295-K Transport Case for Safety Suction Handle 295
293 Safety Suction Handle 293 suction cup dimensions approx. 380 x 80 mm loading capacity 70 kg (horizontal) with control vacuummeter approx. 0,2 l vacuum tank suction lip and sealing lip inside
384 Safety Suction Handle PALUE 2 suction cups 200 mm ∅ loading capacity 80 kg (vertical) suitable for smooth and slightly structured surfaces with control vacuummeter vacuum tank suction lip and sealing lip inside
Address: Haendelweg 5 23556 Luebeck Germany Phone: +49 451 47008-0 E-mail: [email protected] Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Safety Suction Handles
3-06_SafetySuctionHandles.doc 31.03.2011 Subject to changes. 2/3
Item-No. Description
284 Power-Grip steel housing suction cup 200 mm ∅ loading capacity 57 kg (vertical, according to supplier) suitable for smooth surfaces with vacuum pump control marking plastic transport case
284-KU Power-Grip plastic housing suction cup 200 mm ∅ loading capacity 57 kg (vertical, according to supplier) suitable for smooth surfaces with vacuum pump control marking plastic transport case
Address: Haendelweg 5 23556 Luebeck Germany Phone: +49 451 47008-0 E-mail: [email protected] Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Safety Suction Handles
3-06_SafetySuctionHandles.doc 31.03.2011 Subject to changes. 3/3
Item-No. Description
286 VERIBOR Suction Lifter aluminium-housing suction cup 210 mm ∅ loading capacity 100 kg (vertical, according to supplier) suitable for smooth surfaces with plastic hand pump control marking plastic transport case
286-ES Spare Sucker for VERIBOR suction lifter
Address: Haendelweg 5 23556 Luebeck Germany Phone: +49 451 47008-0 E-mail: [email protected] Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Visit our Internet-Page http://www.pannkoke.com Address: Postbox 26 54 D-23514 Luebeck Germany Telephone:+49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Fax: +49 451 47008-37 Internet: http://www.pannkoke.com
flexibler Saugergriff 535 Zur Montage gewölbter Autoscheiben Zum Heben und Halten großer Teile mit ebenen oder gewölbten Flächen Zum Ausziehen großflächiger Beulen z. B. am Kfz Zum Transportieren von konvex oder konkav gebogener Materialien
Flexible Suction Handle 535 For installation of curved windscreens For the lifting and holding of large parts with smooth or curved surfaces For pulling large dents out of cars For transporting convex and concave curved materials
3-07_535.doc 05.08.2006 Änderungen vorbehalten 1/2
Beschreibung: • für alle luftdichten Flächen • für ebene und gewölbte
Flächen • maximaler Außendurchmesser
im angesaugten Zustand 250 mm
• kleinster ansaugbarer
Innenradius 200 mm • kleinster ansaugbarer
Außenradius 100 mm • Tragfähigkeit
bei – 0,6 bar Vakuum, 20 °C, 2-facher Sicherheitsfaktor, horizontal 45 kg
• zwei Dichtlippen • Befestigungsgewinde M12
z. B. für den Handgriff Best-Nr. 535 Sauger ohne Griff
295-K Transportkoffer vs/9-00182 Bügelgriff
für Sauger 535 535-V Sauger mit
Vakuumanschluss
Description: • for all types of gastight material • for smooth and curved
surfaces • maximum outer diameter when
vacuum is applied 250 mm • smallest inner radius where
vacuum can be applied 200 mm
• smallest outer radius where
vacuum can be applied 100 mm
• Loading capacity
at – 0,6 bar vacuum, 20 °C, 2-fold safety factor, horizontal 45 kg
• two sealing lips • fastening thread M12
e. g. for the handle Item no. 535 suction cup without handle
295-K transport case vs/9-00182 bow handle
for suction cup 535 535-V suction cup with
vacuum connection
3-07_535.doc 05.08.2006 Änderungen vorbehalten 2/2
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Suction Handles
3-08_SuctionHandles.doc 05.08.2006 Subject to changes. 1/2
Item-No. Description
531-50 Button Suction Cup flexible, solid rubber with releasing edge suction cup 50 mm ∅
531-80 Button Suction Cup flexible, solid rubber with releasing edge suction cup 80 mm ∅
538 Lift-Off Suction Cup solid rubber with double finger eye suction cup 80 mm ∅ pulling force approx. 15 kg
537 Suction Head suction cup 110 mm ∅ for moving of large sliding doors lifting of table plates show cases, etc.
375 Stabilizing Suction Cup for universal handling 120 mm Ø
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Suction Handles
3-08_SuctionHandles.doc 05.08.2006 Subject to changes. 2/2
Item-No. Description
535 Flexible Suction Handle for transporting of convex or concave curved materials maximum outer diameter in action 250 mm loading capacity horizontal 45 kg
535 & vs/9-00182
Suction Cup 535 with bow-type handle
535 & vs/4-03297
Suction Cup 535 with T-handle
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Suction Handles
3-09_Veribor_SuctionHandles.doc 05.08.2006 Subject to changes. 1/2
Item-No. Description
385/0 VERIBOR Suction Lifter 1-point aluminium body collapsible handle to operate with one hand suction cup 120 mm ∅ loading capacity 30 kg (horizontal, according to supplier)
385/0KU VERIBOR Suction Lifter 1-point plastic body collapsible handle to operate with one hand suction cup 120 mm ∅ loading capacity 30 kg (horizontal, according to supplier)
385/2 VERIBOR Suction Lifter 2-point aluminium body suction cup 120 mm ∅ loading capacity 40 kg (horizontal, according to supplier) loading capacity 70 kg (vertical, according to supplier)
385/2KU VERIBOR Suction Lifter 2-point plastic body suction cup 120 mm ∅ loading capacity 60 kg (vertical, according to supplier)
385/2G VERIBOR Suction Lifter 2-point - flexible for curved surfaces plastic body suction cup 120 mm ∅ loading capacity 45 kg (vertical, according to supplier)
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Suction Handles
3-09_Veribor_SuctionHandles.doc 05.08.2006 Subject to changes. 2/2
Item-No. Description
385/2GG VERIBOR Suction Lifter 2-point - flexible for curved surfaces with joints in longitudinal and vertical direction plastic body suction cup 150 mm ∅ loading capacity 45 kg (vertically, according to supplier)
385/2WZ VERIBOR Suction Lifter 2-point - angular for all smooth surfaces for fixing of mitres at showcases, aquariums, shop windows etc. plastic body 2 articulated joints 90 degrees marking suction cup 120 mm ∅
385/3 VERIBOR Suction Lifter 3-point aluminium body suction cup 120 mm ∅ loading capacity 100 kg (vertical, according to supplier)
385/ES110 Spare Sucker for VERIBOR 385/0
385/ES120 Spare Sucker for VERIBOR 385/2+3 with bolt and tilting lever
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Suction Handles
Item-No. Description
386/1 GREIF-ZU Suction Lifter 1-point aluminium body suction cup 110 mm ∅ loading capacity 30 kg (vertical, according to supplier)
386/2 GREIF-ZU Suction Lifter 2-point aluminium body suction cup 110 mm ∅ loading capacity 60 kg (vertical, according to supplier)
386/3 GREIF-ZU Suction Lifter 3-point aluminium body suction cup 110 mm ∅ loading capacity 100 kg (vertical, according to supplier)
386/ES110 Spare Sucker for GREIF-ZU
3-10_Greif-zu_SuctionHandles.doc 05.08.2006 Subject to changes. 1/1
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Hold & Fasten Suction Cups
Item-No. Description
537 Suction Head suction cup 110 mm ∅ possibility of tensioning via M 8 – thread maximum vertical carrying capacity approx. 20 kg ball head changeable against any other nut or means of thread tensioning
536 Fastening Suction Cup suction cup 180 mm ∅ possibility of tensioning via M12 – thread maximum vertical carrying capacity approx. 40 kg tension wheel changeable against any other nut or means of thread tensioning
375 Stabilizing Suction Cup the universal usable suction cup 120 mm Ø maximum vertical carrying capacity approx. 35 kg clamping sleeve 25 mm Ø with lateral tension screw M6 or fastening clamping piece with 10 mm Ø inside bore
535 Flexible Suction Handle for transporting of convex or concave curved materials maximum outer diameter in action 250 mm loading capacity horizontal approx. 45 kg fastening bore with M12 – thread
3-11_Hold&FastenSuctionCups.doc 05.08.2006Änderungen vorbehalten / Subject to changes. 1/1
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Group 5
www.pannkoke.com
Pannkoke Flachglastechnik GmbH is a company specialising in manufacturing systems engineering for equipment, machines and tools in the glass processing industry. Our medium-sized engineering company was founded in 1900.
Our customers who have been implementing our products for decades, are our main criterion for the quality of our products.
Please ask for information on our extensive production and delivery programme. Machines for cutting flat glass • from manual to CNC-Machine Vacuum lifting and holding technology • for lifting, holding and transporting
concrete, glass, plastics, metal, stone or lead blocks at temperatures of up to 200° C
• vacuum transporting equipment for roof and wall panels used in industrial construction
Tools • suction devices, tools and devices for processing and handling flat glass
This group comprises:
Glass pincing pliers Scraping knife Plastic putty scraper Parachute belt Hacking knives Scraping knife Windshield tool Hand rubbing stone Double hand smoother Wire-glass pliers Glass breaking pliers Glazier's apron - half size Glazier's apron - long size Glass scraper Glass cutter Glass-cutting equipment Glass carrying gloves
Wiping cloth Putty knife Block lever Wood block splitting tool Grozing pliers Leather apron - half size Lath scissors Cavity pliers Wrist protector Rhombic pins Grinding apron PALUE 3-point pliers Sigla knife Mirror glass pliers Pin hammer Ripping knife Off-set glass pliers
You can contact us at Telephone: +49 / (0)451 / 47008-0 Telefax: +49 / (0)451 / 47008-37 email: [email protected] www.pannkoke.com
5-0_Group_5.doc 05.08.2006 2/2
Address: Postfach 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Fax: +49 451 47008-37 Internet: http://www.pannkoke.com
Hacking Knives etc.
5-1_HackingKnives.doc 05.08.2006 Subject to changes. 1/1
Item-No. Description
21 Hacking Knife plastic haft blade 95 x 32 mm
25 Hacking Knife DON CARLOS leather haft blade 100 x 26/38 mm
25-G Hacking Knife DON CARLOS plastic haft and protection edge blade 100 x 26/38 mm
26 Scratching Knife continuous, hardened blade knife-edge forged flat solid design
22 Ripping Knife sickle shaped to rip up sealings with internally knife-edge 80 mm long
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glazing Equipment
5-2_GlazingEquipment.doc 05.08.2006 Subject to changes. 1/3
Item-No. Description
367 Lath Scissors LOEWE for groove laths and rubber profiles with mitre stop
47 Pin Hammer handle polished – without spring
551 Splitting Tool blade 80 mm wide with leather haft for splitting of distance blocks releasing of folding fittings etc.
551-HO Splitting Tool blade 80 mm wide with wooden haft - shock resistant for splitting of distance blocks releasing of folding fittings etc.
555-KU Block Lever made of resistant plastic with wooden haft approx. 70 mm wide
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glazing Equipment
5-2_GlazingEquipment.doc 05.08.2006 Subject to changes. 2/3
Item-No. Description
555-HOLZ Block Lever made of good ash wood approx. 60 mm wide
568 Plastic Putty Scraper made of non-adhesive plastic for all sealings materials approx. 90 x 90 x 8 mm
569 Scraping Knife made of non-adhesive plastic with plastic handle for all sealings materials,
38 Windshield Tool installation set for rubber sealing complete set – two pieces with pocket
38-ALU Windshield Tool aluminium handle
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glazing Equipment
5-2_GlazingEquipment.doc 05.08.2006 Subject to changes. 3/3
Item-No. Description
38-HOLZ Windshield Tool wooden handle
38-OESE Windshield Tool spare loop for windshield tool
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glass Breaking Pliers
5-3_GlassBreakingPliers 19.12.2006 Subject to changes. 1/3
Item-No. Description
77 Cavity Pliers (no tile pliers) for easy crumbling off of bores etc. from 20 mm hole-∅ - to 8 mm glass thickness
83 Off-Set Glass Pliers for shop window glazings or for enlarging of openings like fan openings etc. bit of tongs 12 mm wide - 120 mm long - 20 mm wide
85 Parallel Jaws hand made parallel bit of tongs bit of tongs 3 mm wide - 160 mm long - 8 mm wide
Parallel Jaws for art glazing
88-130/8 140 mm long - 8 mm wide
88-160/5 160 mm long - 5 mm wide
88-160/8 160 mm long - 8 mm wide
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glass Breaking Pliers
5-3_GlassBreakingPliers 19.12.2006 Subject to changes. 2/3
Item-No. Description
90 Glass Pincing Pliers with tungsten carbide jaws for easy breaking-off of small glass pieces especially for round edges
100 Wire Glass Pliers also for laminated glass for easy and clean breaking of small strips hand made - with felt interlining 280 mm long - 180 mm wide
200/180/2 Glass Breaking Pliers- straight bit of tongs 180 mm long - 24 mm wide
200/200/2 200 mm long - 20 mm wide
200/4 Glass Breaking Pliers heavy duty design suitable up to 20 mm glass thickness hand made 380 mm long - 23 mm wide
716 Glass Breaking Pliers ideal for Tiffany- and art glazing up to a glass thickness of 5 mm
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glass Breaking Pliers
5-3_GlassBreakingPliers 19.12.2006 Subject to changes. 3/3
Item-No. Description
81 Glass Breaking Pliers of aluminium 260 mm long up to 8 mm glass thickness
81-20 3-Point-Pliers with leverage for glass thickness from 8 to 20 mm 330 mm long
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Putty Knives
5-4_PuttyKnives.doc 05.08.2006 Subject to changes. 1/2
Item-No. Description
0/18 blunt, bent, continuous blade high polished brown haft 18 x 20 x 200 mm
3 pointed blade high polished brown haft 26 x 95x 195 mm
6 bent, high polished, continuous blunt blade brown haft 28 x 115 x 200 mm
8 SWISS DESIGN blunt, bevelled, no continuous blade high polished brown haft 18 x 75 x 195 mm
10 pointed blade high polished, continuous blade black haft with brass rivets 27 x 105 x 219 mm
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Putty Knives
5-4_PuttyKnives.doc 05.08.2006 Subject to changes. 2/2
Item-No. Description
12 Swedish Design bevelled, continuous blade high polished brown haft 26 x 110 mm
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glass Scraper
5-5_GlassScraper.doc 05.08.2006 Subject to changes. 1/2
Item-No. Description
35-44H Holder for Blades 44 mm long
35-60H Holder for Blades 60 mm long
36-44H Scraping Blade Box angular – extra strong – 44 mm long holder with 10 blades
36-44K Scraping Blade Box angular – extra strong – 44 mm long 25 blades without holder
36-60H Scraping Blade Box angular – extra strong – 60 mm long Holder with 10 blades
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glass Scraper
5-5_GlassScraper.doc 05.08.2006 Subject to changes. 2/2
Item-No. Description
36-60K Scraping Blade Box angular – extra strong – 60 mm long 25 blades without holder
34 Glass Scraper changeable blade 4-sided grinded
34-KL Spare Blades for glass scraper 34 10 blades
37 Sigla-Knife for safety separating of the laminated glass foil changeable, soft, thin blade
37-KL Spare Blades for Sigla knife 37 100 blades
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Arbeitsschutz
Artikel-Nr. Beschreibung
557-F Pulsschützer aus Spaltleder mit 2 Federeinlagen
410-1.6 Handlappen aus Spezial Naturkrepp ca. 130 x 170 mm mit Daumenloch ca. 1,6 mm dick außer zum Tragen von glatten Materialen auch geeignet zum Lösen oder Anziehen von Verschlüssen und Verschraubungen
411-10 Glastragehandschuhe Naturkreppgummi beschichtet rutschfest – strapazierfähig mit Strickstulpe
411-ST Glastragehandschuhe Naturkreppgummi beschichtet rutschfest – strapazierfähig mit langer Stulpe
246 Leder-Halbschürze aus Spaltleder mit aufgesetzte Tasche
5-6_Arbeitsschutz.doc 13.02.2008 Änderungen vorbehalten. 1/1
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Work Protection
5-7_WorkProtection.doc 06.08.2006 Subject to changes. 1/1
Item-No. Description
251 Double Hand Smoother prevents cut injuries both cutting edges are clipped with one working cycle with changeable grinding files
251-EW150 Spare Roller for Double hand smoother
Hand Rubbing Stone for adjusting the glass edge
252-100 medium K180
252-180 fine K180
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Besuchen Sie unsere Internet-Seite http://www.pannkoke.com Adresse: Postfach 26 54 D-23514 Lübeck Deutschland Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Fax: +49 451 47008-37 Internet: http://www.pannkoke.de
Group 6
Supporting blocks and spacers
of knotless hardwood
www.pannkoke.com
Pannkoke Flachglastechnik GmbH is a company specialising in manufacturing systems engineering for equipment, machines and tools in the glass processing industry. Our medium-sized engineering company was founded in 1900.
This group comprises Supporting blocks and spacers
of knotless hardwood 80 or 100 mm long with coloured impregnation
with high-grade wood preservative fungicide almost odourless
Packaging unit: • packed loosely in a net bag • packed loosely in a cardboard box Quantity discounts for dimensions exceeding 80x6x1 mm: • 30 bags 5 % • 50 bags 10 % • 100 bags 15 % • 3 boxes 5 % • 5 boxes 10 % • 10 boxes 15 % • 50 boxes 20 % Customised dimensions:
You can contact us at Telephone: +49 / (0)451 / 47008-0 Telefax: +49 / (0)451 / 47008-37 email: [email protected] www.pannkoke.com
6-0_Group_6H.doc 06.08.2006 2/2
Address: Postfach 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Fax: +49 451 47008-37 Internet: http://www.pannkoke.com
Group 6
Supporting Blocks and Spacers
of polypropylene (PP)
www.pannkoke.com
Pannkoke Flachglastechnik GmbH is a company specialising in manufacturing systems engineering for equipment, machines and tools in the glass processing industry. Our medium-sized engineering company was founded in 1900.
This group comprises Supporting blocks and spacers
of polypropylene (PP) Shore hardness max. 90 80 or 100 mm long coloured
Packaging unit: • Bag of 100 Quantity discount for: • 10 bags 3 % • 30 bags 5 % • 50 bags 10 % Customised dimensions: • on request
You can contact us at Telephone: +49 / (0)451 / 47008-0 Telefax: +49 / (0)451 / 47008-37 email: [email protected] www.pannkoke.com
6-0_Group_6Ku.doc 06.08.2006 2/2
Address: Postfach 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Fax: +49 451 47008-37 Internet: http://www.pannkoke.com
Group 7
www.pannkoke.com
Pannkoke Flachglastechnik GmbH is a company specialising in manufacturing systems engineering for equipment, machines and tools in the glass processing industry. Our medium-sized engineering company was founded in 1900.
Our customers who have been implementing our products for decades, are our main criterion for the quality of our products.
Please ask for information on our extensive production and delivery programme. Machines for cutting flat glass • from manual to CNC-Machine Vacuum lifting and holding technology • for lifting, holding and transporting
concrete, glass, plastics, metal, stone or lead blocks at temperatures of up to 200° C
• vacuum transporting equipment for roof and wall panels used in industrial construction
Tools • suction devices, tools and devices for processing and handling flat glass
This group comprises:
Glass cutter Glass-cutting equipment Measuring devices Cutting wheel Cutting slide Strip cutter Parallel cutting frame Plastic glazier's square Cutting and break-out bar Profile glass cutting angle Round-edged template Radius cutter Ruler stop Spring clamp Circle cutting machine
Circle cutting device Suction circle cutter Circle and oval cutting machine Oil glass cutter TC cutting wheel Quick-changing holder Plastic wheel holder Cutting emulsion Glass thickness gauge Glass O-meter Spring tape measure Marking tool Marking chalk Etching ink
You can contact us at Telephone: +49 / (0)451 / 47008-0 Telefax: +49 / (0)451 / 47008-37 email: [email protected] www.pannkoke.com
7-0_Group_7.doc 06.08.2006 2/2
Address: Postfach 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Fax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glass Cutting Equipment
Item-No. Description
Cutting Slide Pannkoke for exact cutting of small rectangles with 3 slides
138-30 30 cm long
138-40 40 cm long
138-50 50 cm long 138-60 60 cm long
139 Spare slide for cutting slide 138-xx
139-R Spare Slide for strip cutter 157-xx
Plastic Glazier’s Square made of one piece, therefore always angular without brace
205-030/17 30/17 cm
205-050/25 50/25 cm
205-060/30 60/30 cm
205-080/30 80/35 cm
205-105/35 105/35 cm
205-135/45 135/45 cm
205-150/45 150/45 cm
205-175/50 175/50 cm
Plastic Glazier’s Square made of one piece, therefore always angular with brace
205-ST060 60/30 cm
205-ST080 80/35 cm
205-ST105 105/35 cm
7-1_GlassCuttingEquipment.doc 13.02.2008 Subject to changes. 1/4
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Glass Cutting Equipment
Item-No. Description
205-ST135 135/45 cm
205-ST150 150/45 cm
205-ST175 175/45 cm
205-ST205 205/60 cm
205-ST250 250/60 cm
Cutting and Break-Out Bar made of one piece plastic
390-508 55 x 4 x 800 mm
390-613 65 x 4 x 1300 mm
390-815 80 x 5 x 1500 mm
390-820 80 x 5 x 2000 mm
390-825 80 x 5 x 2500 mm
Cutting and Break-Out Bar made of one piece plastic with suction cup
390-815/S 80 x 5 x 1500 mm
390-820/S 80 x 5 x 2000 mm
390-825/S 80 x 5 x 2500 mm
398-22/32 Profile Glas Cutting Angle made of plastic from K22 to K32
398-ZP Additonal Plate for Profile Glas Cutting Angle made of plastic to K50
7-1_GlassCuttingEquipment.doc 13.02.2008 Subject to changes. 2/4
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Glass Cutting Equipment
Item-No. Description
224 Round-Edge Template made of plastic for radii from 10 to 70 mm
Radius Cutter made of plastic for cutting of round corners saves grinding time no sliping
225-klein 2 – 9 cm
225-gross bis 16 cm
394 Ruler Stop made of brass with suction cup also for figured glass
393-F Spring Clamp for firm tightening: – rulers on glass – sealed units with riveted fiber lining
230-30 Circle Cutting Machine without plate with SILBERSCHNITT-rosette
230-60 Circle Cutting Machine
227 Circle Cutter for circles up to 9 cm ∅
231 Spare Slide with MICRO-wheel for smaller circles
7-1_GlassCuttingEquipment.doc 13.02.2008 Subject to changes. 3/4
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Glass Cutting Equipment
Item-No. Description
Circle Cutter with lever and rosette wminimum circle is ap
ith 6 wheels prox. 90 mm in diameter
228-040 40 cm ∅ cutting
228-060 60 cm ∅ cutting
228-100 100 cm ∅ cutting
228-120 120 cm ∅ cutting
228-160 160 cm ∅ cutting
228-200 200 cm ∅ cutting
228-ES Spare Lever for circle cutter 228-xx
232-20/120 d Oval Cutting Machine with glass cutter and drawing pencil 20 – 120 cm cutting range exchangeable, ball-bearing wheel holder
Circle an
232-VL Extension for circle and oval cutting machine 232-20/120 up to approx. 182 cm
232-ESK /120
Spare Wheel Holder for circle and oval cutting machine 232-20
33-10/40
el holder
2 Circle & Oval Cutter 10 – 40 cm cutting range exchangeable, ball-bearing whe
tting and Break-Out Bar m wide till 6,80 m made of one piece
glass
CuAlu-ruler 100 mnonskid, also for figured glass no scratches on the
389-oM/lfm without scale
389-eM/lfm mm scale one-side 389-dM/lfm mm scale double sided
7-1_GlassCuttingEquipment.doc 13.02.2008 Subject to changes. 4/4
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Glass Cutter
7-2_GlassCutter.doc 06.08.2006 Subject to changes. 1/3
Item-No. Description
52-424 Glass Cutter HOBBY LONGLIFE length adjustable individually with replaceable wheel holder
52-Rad-Trg Spare Wheel Holder with one tungsten carbide wheel, 4 mm ∅ for glass cutter HOBBY LONGLIFE 52-424
61-100 Glass Cutter standard quality with 6 steel wheels made of high-alloy steel nickeled head red-brown wooden haft
60-102 Spare Wheels for glass cutter 61-100
63-101 Spare Rosette with 6 steel wheels for glass cutter 61-100
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glass Cutter
7-2_GlassCutter.doc 06.08.2006 Subject to changes. 2/3
Item-No. Description
64-400 HM Glass Cutter with one tungsten-carbide cutting wheel especially suitable for cutting at the ruler
64-401 Spare Rosette with one tungsten-carbide cutting wheel for glass cutter 64-400
265-2.135 Spare Wheels tungsten-carbide cutting wheel 135°
61-2004 MICRO-Glass Cutter plastic haft with pointed head universal glass cutter for glass thicknesses of 2 – 12 mm 1 micro cutting wheel wheel not replaceable
259-447.8 Oil-Glass Cutter narrow replaceable, movable cutting head with micro wheel cutting angle 135 ° especially suitable for manual contour cut and for profile glass
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glass Cutter
7-2_GlassCutter.doc 06.08.2006 Subject to changes. 3/3
Item-No. Description
259-447.1 Spare Cutting Head for oil glass cutter 259-447.8
261-448.8 Oil-Glass Cutter wide replaceable, movable cutting head with micro wheel cutting angle 135 °
261-448.1 Spare Cutting Head for oil glass cutter 259-448.8
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Schneidrädchen
Artikel-Nr.. Beschreibung
HM-Schneidrädchen SILBERSCHNITT Hartmetall-Rädchen geeignet für Schneidmaschinen 11, 100/2 – 100/4, 115/2 – 115/4
265-2.135 135 ° 5,0 mm ∅
265-2.144 144 ° 5,0 mm ∅ 265-2.150 150 ° 5,0 mm ∅
HM-Schneidrädchen SILBERSCHNITT Hartmetall-Rädchen geeignet für Schneidmaschinen 115-3p, 115-3A+M, DIG, NC78, 100-5d, 115-5d, 115-6d
265-3.135 135 ° 5,6 mm ∅
265-3.144 144 ° 5,6 mm ∅ 265-3.150 150 ° 5,6 mm ∅
MMK-SWH/SV Schnellwechselhalter mit Achse für HM-Rädchen 265-3...
MMK-HMA/SV Ersatzachse
MMK-MTH/SV Montagehilfe für Schnellwechselhalter
7-3_Schneidrädchen_D.doc 08.04.2009 Änderungen vorbehalten 1/4
Anschrift: Händelweg 5 -23556 Lübeck Germany Telefon: +49 451 47008-0 E-Mail: [email protected] Telefax: +49 451 47008-37 Internet: www.pannkoke.de
Schneidrädchen
Artikel-Nr.. Beschreibung
Kunststoff-Rädchenträger für Schneidmaschinen mit 1 HM-Rädchen 6,0 mm Ø
265-4.135 135° weiß
265-4.144 145° schwarz
265-4.150 150° braun
Kunststoff-Rädchenträger für Schneidmaschinen mit 1 HM-Rädchen 6,0 mm Ø Rauhschliff für beschichtete Gläser
265-7.135 135° weiß
265-7.145 145° schwarz
265-7.150 150° braun
Kunststoff-Rädchenträger für Schneidmaschinen mit 1 HM-Rädchen 5,0 mm Ø geeignet für Schneidmaschinen 100-5d, 115-5d, 115-6d, NC-L, NC-2, NC-3, NC-M, Prince
265-6.135 135° weiß
265-6.140 140° blau
7-3_Schneidrädchen_D.doc 08.04.2009 Änderungen vorbehalten 2/4
Anschrift: Händelweg 5 -23556 Lübeck Germany Telefon: +49 451 47008-0 E-Mail: [email protected] Telefax: +49 451 47008-37 Internet: www.pannkoke.de
Schneidrädchen
Artikel-Nr.. Beschreibung
265-6.145 145° schwarz
265-6.150 150° braun
Kunststoff-Rädchenträger für Schneidmaschinen mit 1 HM-Rädchen 5,0 mm Ø Rauhschliff für beschichtete Gläser geeignet für Schneidmaschinen 100-5d, 115-5d, 115-6d, NC-L, NC-2, NC-3, NC-M, Prince
265-8.135 135° weiß
265-8.145 145° schwarz
265-8.150 150° braun
265-8.155 155°
265-8.160 160° dunkelgrün
SILBERSCHNITT HM-Rädchen ACTIVE Hartmetall-Rädchen 6 x 3 1,6 mm geeignet für Schneidmaschinen NC-M, VSG-M2, VSG-L2, Prince 3, Prince 3M
270-3.128 128 °
270-3.140 140 °
270-3.145 145 °
270-3.150 150 °
270-3.152 152 °
7-3_Schneidrädchen_D.doc 08.04.2009 Änderungen vorbehalten 3/4
Anschrift: Händelweg 5 -23556 Lübeck Germany Telefon: +49 451 47008-0 E-Mail: [email protected] Telefax: +49 451 47008-37 Internet: www.pannkoke.de
Schneidrädchen
Artikel-Nr.. Beschreibung
270-3.154 154 °
MMK-SWH/FL Schnellwechselhalter ohne Achse für HM-Rädchen 270-3...
MMK-HMA/FL Ersatzachse
7-3_Schneidrädchen_D.doc 08.04.2009 Änderungen vorbehalten 4/4
Anschrift: Händelweg 5 -23556 Lübeck Germany Telefon: +49 451 47008-0 E-Mail: [email protected] Telefax: +49 451 47008-37 Internet: www.pannkoke.de
Cutting Emulsion
7-4_CuttingEmulsion.doc 06.08.2006 Subject to changes. 1/1
Item-No. Description
Cutting Emulsion not suitable for mirrors and coated glass
50 plastic bottle with 1 l
50-005 canister with 5 l
50-010 canister with 10 l
50-050 Poly-container with 60 l
50-180 barrel with 200 l
Cutting Emulsion for coated glass
50-BES005 canister with 5 l
50-BES022 canister with 30 l
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Measuring Tools
7-5_MeasuringTools.doc 13.02.2008 Subject to changes. 1/2
Item-No. Description
Glass Thickness Measuring Tool scale 1/10 mm
66-10 Scale range 10 mm capacity 15 mm
66-20 Scale range 20 mm capacity 50 mm
66-30 Scale range 30 mm capacity 50 mm
69-GO Glas-O-Meter for optical measuring of the glass thickness in the built-in condition
67/3PAN Spring Ttape Measure PANORAMIC plastic capsule – 13 mm wide inside dimension readable at the top 3,0 m long
67/3ST Spring Tape Measure STANLEY metal capsule – 13 mm wide 3,0 m long
67/3.5 Spring Tape Measure NICHOLSON plastic capsule – 13 mm wide with locking lever 3,5 m long
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Measuring Tools
7-5_MeasuringTools.doc 13.02.2008 Subject to changes. 2/2
Item-No. Description
67/5F Spring Tape Measure STANLEY plastic capsule – 13 mm wide with locking lever 5 m long
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
for Marking
7-6_forMarking.doc 06.08.2006 Subject to changes. 1/1
Item-No. Description
53 Marking Tool with tungsten carbide tip 145 mm long steel handle
53-KU Marking Tool with tungsten carbide tip 145 mm long plastic handle
Marking Chalk for wet glass soluable for washing machines box à 12 pieces
130-BLAU colour: blue 130-GELB colour: yellow 130-GRUEN colour: green
130-ROT colour: redt
130-SCHW colour: black 130-WEISS colour: white
129 Etching Ink hydrofluoric acid in 250 g rubber bottle
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Visit our Internet-Page http://www.pannkoke.com Address: Postbox 26 54 D-23514 Luebeck Germany Telephone:+49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Fax: +49 451 47008-37 Internet: http://www.pannkoke.com
Group 8/9
www.pannkoke.com
Pannkoke Flachglastechnik GmbH is a company specialising in manufacturing systems engineering for equipment, machines and tools in the glass processing industry. Our medium-sized engineering company was founded in 1900.
Our customers who have been implementing our products for decades, are our main criterion for the quality of our products.
Please ask for information on our extensive production and delivery programme. Machines for cutting flat glass • from manual to CNC-Machine Vacuum lifting and holding technology • for lifting, holding and transporting
concrete, glass, plastics, metal, stone or lead blocks at temperatures of up to 200° C
• vacuum transporting equipment for roof and wall panels used in industrial construction
Tools • suction devices, tools and devices for processing and handling flat glass
This group comprises:
Charger Drill powder Drilling stand Drillling stand base Truing diamond Diamond drill Mini diamond circular saw Diamond saw blade Diamond segments Manual grinding machine Gloss paint for edges Counter sink diamond
Cork polishing belt Manual edge decoating device Polishing powder CERITE 419 Suction ring Grinding belt Grinding file Grinding wheel Abrasive pencil Segmented glass drill Cutting blade for compass saw Water ring Water rinsing head
You can contact us at Telephone: +49 / (0)451 / 47008-0 Telefax: +49 / (0)451 / 47008-37 email: [email protected] www.pannkoke.com
9-0_Group_8&9.doc 08.08.2006 2/2
Address: Postfach 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Fax: +49 451 47008-37 Internet: http://www.pannkoke.com
Bohrständer 651 Leicht, handlich, universell einsetzbar das ideale Gerät für den Glasermeister zum Glasbohren auf der Baustelle und im allgemeinen Werkstattbereich mit Diamantbohrer Segmentbohrer sowie für andere Bohrarbeiten
Drill stand 651 Lightweight design for universal use the perfect equipment for glazing experts for glass drilling at the site and at the workshop capable to accept diamond core drill segmented glass drill also for other types of drill work
9-1_651.doc 08.08.2006 Änderungen vorbehalten 1/2
Beschreibung: Bohrständer Saugerfuß mit 3 eingebauten Saugern max. Bohrdurchmesser 220 mm Tiefenanschlag separate Fußplatte für Nicht-Glasbohrarbeiten 1 Satz Saugringe = 3 Stück Einspann-Bohrung 43 mm Durchmesser Best.-Nr. 651 Bohrmaschine als Antriebsmotor AEG-Zweigang-Schlagbohrer mit: • stufenloser elektronischer
Drehzahlregelung bis 3000 1/min
• Bohrfutter bis 13 mm • 230 Volt – 800 Watt Best.-Nr. 650-AEG Wasserspülbuchse für Diamantbohrer R ½“ belgisches Gewinde komplett mit Schlüsseln Best.Nr. 655
Description: Drill stand Suction base plate with 3 incorporated suction cups max. drilling diameter 220 mm stop for depth limit separate base plate for working on non-glass substrates 1 set suction rings = 3 peaces clamping jaw 43 mm diameter Item.-No. 651 Drilling machine as drive motor AEG 2-speed drilling machine with: • stepless adjustable revolution
up to 3000 1/min
• drill chuck up to 13 mm • 230 Volt – 800 Watt Item.-No. 650-AEG Water rinse head for diamond core drills with Belgian thread R ½“ complete with key set Item.-No. 655
9-1_651.doc 08.08.2006 Änderungen vorbehalten 2/2
Anschrift: Postfach 26 54 D-23514 Lübeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Lübeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.de
Drilling of Glass
9-2_DrillingOfGlass.doc 08.08.2006 Subject to changes. 1/5
Item-No. Description
651 Drilling stand suction foot with 3 built-in suction cups max. drilling diameter 220 mm bit stop clamping bore 43 mm ∅ (without drilling machine, water rinse head and diamond drills)
650-AEG Drilling machine continuously variable electronic speed range up to 3000 1/min 230 Volts - 800 Watt
655 Water rinse head clamping bore 43 mm ∅ for diamond drills 1/2" complete with acceptance nut and keys
132-10 Drill adapter R ½“ with clamping journal 10 mm Ø
132 Nipple joint made of brass for usage of diamond drills ¼“ in acceptance R ½“
132-1/4 Nipple joint made of brass for usage of diamond drills R ½“ in acceptance ¼“
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Drilling of Glass
9-2_DrillingOfGlass.doc 08.08.2006 Subject to changes. 2/5
Item-No. Description
Suction ring for holding of the coolant
630 small - inside-Ø 22 mm / outside- Ø 65 mm
632 medium - inside -Ø 55 mm / outside - Ø 110 mm
631 large - inside -Ø 135 mm / outside - Ø 165 mm
651-FUSS Drilling stand with 3 built-in suction cups clamping bore 40 mm Ø suitable for drilling stand 651 without further parts
134 Segmented glass drill drilling range from 65 to 250 mm ∅ fastening 1/2" with cone in a transport case
Diamond segments only paired available galvanic coated unbreakable
134-1 for the drilling range approx. 65 – 100 mm Ø
134-2 for the drilling range approx. 100 – 135 mm Ø
134-3 for the drilling range approx. 135 – 175 mm Ø
134-4 for the drilling range approx. 175 – 250 mm Ø
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Drilling of Glass
9-2_DrillingOfGlass.doc 08.08.2006 Subject to changes. 3/5
Item-No. Description
Diamond segments only paired available in bronze sintered very sensitive
134-1/BR for the drilling range approx. 65 – 100 mm Ø
134-2/BR for the drilling range approx. 100 – 135 mm Ø
134-3/BR for the drilling range approx. 135 – 175 mm Ø
134-4/BR for the drilling range approx. 175 – 250 mm Ø
Diamond drill high quality in bronze sintered for water pressure cooling 10 mm coating height 40 mm shaft length R ½“ - Belgian thread
136-003 3,0 mm Ø
136-004 4,0 mm Ø
136-005 5,0 mm Ø
136-006 6,0 mm Ø
136-007 7,0 mm Ø
136-008 8,0 mm Ø
136-009 9,0 mm Ø
136-010 10,0 mm Ø
136-011 11,0 mm Ø
136-012 12,0 mm Ø
136-013 13,0 mm Ø
136-014 14,0 mm Ø
136-015 15,0 mm Ø
136-016 16,0 mm Ø
136-017 17,0 mm Ø
136-018 18,0 mm Ø
136-019 19,0 mm Ø
136-020 20,0 mm Ø
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Drilling of Glass
9-2_DrillingOfGlass.doc 08.08.2006 Subject to changes. 4/5
Item-No. Description
136-020 20,0 mm Ø
136-021 21,0 mm Ø
136-022 22,0 mm Ø
136-023 23,0 mm Ø
136-024 24,0 mm Ø
136-025 25,0 mm Ø
136-026 26,0 mm Ø
136-027 27,0 mm Ø
136-028 28,0 mm Ø
136-029 29,0 mm Ø
136-030 30,0 mm Ø
136-031 31,0 mm Ø
136-032 32,0 mm Ø
136-033 33,0 mm Ø
136-034 34,0 mm Ø
136-035 35,0 mm Ø
136-036 36,0 mm Ø
136-037 37,0 mm Ø
136-038 38,0 mm Ø
136-039 39,0 mm Ø
136-040 40,0 mm Ø
136-041 41,0 mm Ø
136-042 42,0 mm Ø
136-043 43,0 mm Ø
136-044 44,0 mm Ø
136-045 45,0 mm Ø
136-046 46,0 mm Ø
136-047 47,0 mm Ø
136-048 48,0 mm Ø
136-049 49,0 mm Ø
136-050 50,0 mm Ø
136-055 55,0 mm Ø
136-060 60,0 mm Ø
136-065 65,0 mm Ø
136-070 70,0 mm Ø
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Drilling of Glass
9-2_DrillingOfGlass.doc 08.08.2006 Subject to changes. 5/5
Item-No. Description
136-075 75,0 mm Ø
136-080 80,0 mm Ø
136-085 85,0 mm Ø
136-090 90,0 mm Ø
136-095 95,0 mm Ø
136-100 100,0 mm Ø
Diamond drill high quality in bronze sintered for water pressure cooling 10 mm coating height 40 mm shaft length R ¼“
136-006/4 6,0 mm Ø
136-024/4 24,0 mm Ø
136-033/4 33,0 mm Ø
136-040/4 40,0 mm Ø
137-0/35 Counter sink diamond for countering of the bore 0 – 35 mm R ½“
Drill powder Silicium-Carbide for glass drilling with steel drills 1 kg plastic box
672-100 grain 100
629 Abrasive stone for sharpening and trimming of diamond drills
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Small Size Machines
9-3_SmallSizeMachines.doc 09.08.2006 Subject to changes. 1/3
Item-No. Description
444 Pneumatic Edge Decoating Equipment for manual removing of the edge coating for sealed-units production simple decoating also of special shapes (convex / concave) stepless adjustable grinding disc speed from 0 – 2500 1/min standardized pressure joint 6 bar operating pressure glass guidance with non-slip protection
444-ES Spare Grinding Disk 125 mm Ø for manual device 444 Schleifscheibenbreite 10 mm Aufnahmebohrung 76,2 mm
443-Sch Marking Template According to your layout
823 Mini Diamond Circular Saw with accumulator diamond daw blade 85 mm Ø cutting depth approx. 30 mm cutting capacity at – 8 mm glass thickness approx. 1,7 m – 3 mm glass thickness approx. 5,0 m also for cutting of mitres up to 45° 9 volt accumulator charger – charging time approx.1 hour felt sole, therefore no scratches fitted with water tank – content approx. 1/4l weight approx. 3,2 kg
823-ES Diamond Saw Blade 85 mm Ø - cutting depth approx. 30 mm
823-A Spare Accumulator
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Small Size Machines
9-3_SmallSizeMachines.doc 09.08.2006 Subject to changes. 2/3
Item-No. Description
823-Aufl. Charger
802 Manual Grinding Machine MAKITA only for dry grinding with dust bag width of grinding belt 75 mm length of grinding belt approx. 530 mm weight approx. 5,0 kg 230 volt, 850 watt
Grinding Belt
670-040 grain 40
670-060 grain 60
670-080 grain 80
670-100 grain 100
670-120 grain 120
670-150 grain 150
670-180 grain 180
670-240 grain 240
670-320 grain 320 676 Cork Polishing Belt
803 Grinding File MAKITA Belt Grinding Machine only for dry grinding for bores up to 50 mm Ø width of grinding belt 30 mm length of grinding belt approx.530 mm weight approx. 2,0 kg 230 volt, 490 watt
Grinding Belt
671-040 grain 40
671-060 grain 60
671-080 grain 80
671-100 grain 100
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Small Size Machines
9-3_SmallSizeMachines.doc 09.08.2006 Subject to changes. 3/3
Item-No. Description
Grinding Belt
671-040 grain 40
671-060 grain 60
671-080 grain 80
671-100 grain 100
671-120 grain 120
671-150 grain 150
671-180 grain 180
671-240 grain 240
671-320 grain 320
677 Cork Polishing Belt
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Accesorries for Small-Size Machines
9-4_AccesorriesForSmall-SizeMachines.doc 09.08.2006Subject to changes. 1/1
Item-No. Description
Cutting Blade for Compass Saw for compass saw BOSCH-Pannkoke only for glass processing
815 diamond coated
816 tungsten carbide coated
Abrasive Pencil for shape grinder ELU-Pannkoke diamond coated - 8 mm Ø length of coating 35 mm
809-F grain fine
809-M grain medium
823-ES Diamond Saw Blade for Mini diamond circular saw MAKITA 85 mm Ø - cutting depth approx. 30 mm
444-ES Grinding Disk for edge decoating equipment (LOW-E) 125 mm Ø for manual device 444 Schleifscheibenbreite 10 mm Aufnahmebohrung 76,2 mm
442-ES Grinding Disk for edge decoating equipment (LOW-E) 200 mm Ø for grinding device 442-ES Schleifscheibenbreite 10 mm Aufnahmebohrung 76,2 mm
442-V/ES Grinding Disk for edge decoating equipment (LOW-E) 150 mm Ø for vertical removing of coating 442-V Schleifscheibenbreite 10 mm Aufnahmebohrung 25 mm
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
for polishing
9-5_forPolishing.doc 09.08.2006 Subject to changes. 1/1
Item-No. Description
664 Gloss-Paint for edges for permanent gloss without polishing put the gloss-paint thinly onto the glass edges after they have grinded with grain 150 or 180
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Group 10
www.pannkoke.com
Pannkoke Flachglastechnik GmbH is a company specialising in manufacturing systems engineering for equipment, machines and tools in the glass processing industry. Our medium-sized engineering company was founded in 1900.
Our customers who have been implementing our products for decades, are our main criterion for the quality of our products.
Please ask for information on our extensive production and delivery programme. Machines for cutting flat glass • from manual to CNC-Machine Vacuum lifting and holding technology • for lifting, holding and transporting
concrete, glass, plastics, metal, stone or lead blocks at temperatures of up to 200° C
• vacuum transporting equipment for roof and wall panels used in industrial construction
Tools • suction devices, tools and devices for processing and handling flat glass
This group comprises:
Glass pincing pliers Marking tool Lead burnisher Lead hammer Lead knife Lead nails Lead stretcher Badger hair brush Double-bladed pattern knife Etching ink Glass O-meter Glass cutter Glass thickness gauge Circle and oval cutting machine Grozing pliers
Plastic glazier's square Soldering iron Soldering tin Oil glass cutter Spring tape measure Red marten brush Suction circle cutter Pattern shears Cutting and break-out bar PALUE 3-point pliers Stearin oil Strip cutter Thermo regulator Coating brush Cutting slide
You can contact us at Telephone: 0451 / 47008-0 Telefax: 0049 (0)451 / 47008-37 email: [email protected] www.pannkoke.com
10-0_Group_10.doc 09.08.2006 2/2
Address: Postfach 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Händelweg 5 D-23556 Luebeck Fax: +49 451 47008-37 Internet: www.pannkoke.com
for Art Glazing
Item-No. Description
101 Lead knife DON CARLOS low pointed black haft without metal end
503 Lead knife DON CARLOS middle raised point black haft with metal end
104 Lead knife DON CARLOS high raised point without metal end
118-5 Lead burnisher for 5 mm heart
118-6 Lead burnisher for 6 mm heart
122 Double-bladed pattern knife with 2 blades without heart adjusting
10-2_for_Art_glazing.doc 09.08.2006 Subject to changes 1/7
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
for Art Glazing
Item-No. Description
122-K Spare blades for double-bladed pattern knife
Pattern shears 200 mm long
120-1.5 1,50 mm heart
120-1.75 1,75 mm heart
120-2 2,00 mm heart
28 Lead hammer with striking surfaces approx. 100 g weight
445 Lead stretcher suitable for all profiles
119 Lead nails conical steel nails packed in bags ea 100 pieces
10-2_for_Art_glazing.doc 09.08.2006 Subject to changes 2/7
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
for Art Glazing
Item-No. Description
750h Polishing brush for brass glazing small, hard steel brush 70 mm ∅ without tensioning mandrel
750-Spannd Tensioning mandrel 6 mm ∅
173/I Soldering iron ZEVA casted in aluminium housing suitable for continuous working 230 volt - 180 watt
173/II Soldering iron ZEVA casted in aluminium housing suitable for continuous working 230 volt - 280 watt
184 Round copper bit - hammer tip - 15 mm for soldering iron 173/I
10-2_for_Art_glazing.doc 09.08.2006 Subject to changes 3/7
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
for Art Glazing
Item-No. Description
185 Round copper bit - both sides - 15 mm for soldering iron 173/I
187 Round copper bit - pointed, round tip - 15/12 mm for soldering iron 173/I
188 Round copper bit - pointed - 19/15 mm for soldering iron 173/II
189 Round copper bit - forged on - 19 mm for soldering iron 173/II
174 Thermo regulator suitable for all electrical soldering irons stepless adjustable periodically connection and disconnection of power 230 volt - for max. 3000 watt
10-2_for_Art_glazing.doc 09.08.2006 Subject to changes 4/7
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
for Art Glazing
Item-No. Description
121-65 Soldering tinn 65% tilamentous
117-1 Stearin oil for lead soldering 1-Liter plastic bottle
176 Soldering iron HOBBYKIT 2 230 volt - 75 watt with soldering tip type SG10
176-SG10 Tip Longlife 7,0 mm
176-SG11 Tip chisel shape 5,0 mm
176-SG12 Tip chisel special form 6,3 mm
10-2_for_Art_glazing.doc 09.08.2006 Subject to changes 5/7
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
for Art Glazing
Item-No. Description
178 Soldering iron PROFIKIT 100 230 volt - 100 watt with soldering tip type SG40
178-SG40 Soldering tip - 45 degree 7 mm
178-SG41 Soldering tip - straight 7 mm
178-SG42 Soldering tip with groove 7 mm
178-SG43 Soldering tip - bent 7 mm
190 Soldering iron PROFIKIT 200 230 volt - 200 watt with soldering tip type SG50
10-2_for_Art_glazing.doc 09.08.2006 Subject to changes 6/7
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
for Art Glazing
Item-No. Description
190-SG50 Soldering tip - hammer tip tip / chisel shape
190-SG51 Soldering tip - hammer tip tip / tip
190-SG52 Soldering tip - straight 10 mm
190-SG53 Soldering tip - bent
175 Stand for soldering iron with built-in electronical output regulator for 230 Volt suitable up to approx. 300 watt power input
195-KH30 Universal holder for soldering iron 176, 178, 190
10-2_for_Art_glazing.doc 09.08.2006 Subject to changes 7/7
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
for Glass Painting
Item-No. Description
Badger hair brush guaranteed pure badger hair extra fully worked into white enameled ferrule polished round handle
161-2.5 size 2 ½“
161-3 size 3“
161-4 size 4“ 161-5 size 5“
Coating brush light bristles vulcanized
163-1 size ½“
163-2 size ¾“
163-3 size 1“
163-4 size 1 ½“
163-5 size 2“
163-6 size 2 ½“
Red marten brush extra fine – pointed – semi long pure (red)
162-E1 No. 1 = 6,0 mm
162-E2 No. 1 = 5,5 mm
162-E3 No. 1 = 5,0 mm
162-E4 No. 1 = 4,5 mm
162-E5 No. 1 = 4,0 mm
162-E6 No. 1 = 3,0 mm
162-E7 No. 1 = 2,0 mm
162-E8 No. 1 = 1,5 mm
Red marten brush extra fine – pointed – semi long imitated (grey)
162-I1 No. 1 = 6,0 mm
162-I2 No. 1 = 5,5 mm
162-I3 No. 1 = 5,0 mm
162-I4 No. 1 = 4,5 mm
162-I5 No. 1 = 4,0 mm
162-I6 No. 1 = 3,0 mm
162-I7 No. 1 = 2,0 mm
162-I8 No. 1 = 1,5 mm
10-3_for_Glass_Painting.doc 09.08.2006 Subject to changes 1/1
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
for Marking
Item-No. Description
53 Marking tool with tungsten carbide tip 145 mm long steel handle
53-KU Marking tool with tungsten carbide tip 145 mm long plastic handle
54 Diamond scribing tool with wooden haf
129 Etching ink hydrofluoric acid in 250 g rubber bottle
10-4_for_Marking.doc 09.08.2006 Subject to changes 1/1
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Measuring Tools
Item-No. Description
Glass thickness measuring tool scale 1/10 mm
66-10 Scale range 10 mm capacity 15 mm
66-20 Scale range 20 mm capacity 50 mm
66-30 Scale range 30 mm capacity 50 mm
69-GO Glas-O-Meter for optical measuring of the glass thickness in the built-in condition
67/3PAN Spring tape measure PANORAMIC plastic capsule – 13 mm wide inside dimension readable at the top 3,0 m long
67/3ST Spring tape measure STANLEY metal capsule – 13 mm wide 3,0 m long
67/3.5 Spring tape measure NICHOLSON plastic capsule – 13 mm wide with locking lever 3,5 m long
10-5_Measuring_Tools.doc 13.02.2008 Subject to changes 1/2
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Measuring Tools
Item-No. Description
67/5F Spring tape measure STANLEY plastic capsule – 13 mm wide with locking lever 5 m long
10-5_Measuring_Tools.doc 13.02.2008 Subject to changes 2/2
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glass Cutter
Item-No. Description
52-424 Glass cutter HOBBY LONGLIFE length adjustable individually with replaceable wheel holder
52-Rad-Trg Spare wheel holder with one tungsten carbide wheel, 4 mm ∅ for glass cutter HOBBY LONGLIFE 52-424
61-100 Glass cutter standard quality with 6 steel wheels made of high-alloy steel nickeled head red-brown wooden haft
60-102 Spare wheels for glass cutter 61-100
63-101 Spare rosette with 6 steel wheels for glass cutter 61-100
10-6_Glass_Cutter.doc 09.08.2006 Subject to changes 1/3
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glass Cutter
Item-No. Description
64-400 HM Glass cutter with einem Hartmetallrädchen especially suitable for cutting at the ruler
64-401 Spare rosette with einem Hartmetallrädchen for glass cutter 64-400
265-2.135 Spare wheels Hartmetall-Rädchen 135°
61-2004 MICRO-Glass cutter plastic haft with pointed head universal glass cutter for glass thicknesses of 2 – 12 mm 1 micro cutting wheel wheel not replaceable
259-447.8 Oil-Glass cutter narrow replaceable, movable cutting head with micro wheel cutting angle 135 ° especially suitable for manual contour cut and for profile glass
10-6_Glass_Cutter.doc 09.08.2006 Subject to changes 2/3
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glass Cutter
Item-No. Description
259-447.1 Spare cutting head for oil glass cutter 259-447.8
261-448.8 Oil-Glass cutter wide replaceable, movable cutting head with micro wheel cutting angle 135 °
261-448.1 Spare cutting head for oil glass cutter 259-448.8
10-6_Glass_Cutter.doc 09.08.2006 Subject to changes 3/3
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glass Cutting Equipment
Item-No. Description
Cutting slide Pannkoke for exact cutting of small rectangles with 3 slides
138-30 30 cm long
138-40 40 cm long
138-50 50 cm long 138-60 60 cm long
139 Spare slides for cutting slide 138-xx
Plastic glazier’s square made of one piece, therefore always angular without brace
205-030/17 30/17 cm
205-050/25 50/25 cm
205-060/30 60/30 cm
205-080/35 80/35 cm
205-105/35 105/35 cm
205-135/45 135/45 cm
205-150/45 150/45 cm
205-175/50 175/50 cm
Cutting and break-out bar made of one piece plastic
390-508 55 x 4 x 800 mm
390-613 65 x 4 x 1300 mm
390-815 80 x 5 x 1500 mm
390-820 80 x 5 x 2000 mm
390-825 80 x 5 x 2500 mm
10-7_Glass_Cutting_Equipment.doc 13.02.2008 Subject to changes 1/2
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glass Cutting Equipment
Item-No. Description
Cutting and break-out bar made of one piece plastic with suction cup
390-815/S 80 x 5 x 1500 mm
390-820/S 80 x 5 x 2000 mm
390-825/S 80 x 5 x 2500 mm
Circle cutter with lever and rosette with 6 wheels minimum circle is approx. 90 mm in diameter
228-040 40 cm ∅ cutting
228-060 60 cm ∅ cutting
228-100 100 cm ∅ cutting
228-120 120 cm ∅ cutting
228-160 160 cm ∅ cutting
228-200 200 cm ∅ cutting
228-ES Spare lever for circle cutter 228-xx
232-20/120 Circle and oval cutting machine with glass cutter and drawing pencil 20 – 120 cm cutting range replaceable, ball-bearing wheel holder
232-VL Extension for circle and oval cutting machine 232-20/120 up to approx. 182 cm
232-ESK Spare wheel holder for circle and oval cutting machine 232-20/120
10-7_Glass_Cutting_Equipment.doc 13.02.2008 Subject to changes 2/2
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glass Breaking Pliers
Item-No. Description
81 PALUE 3-point pliers for breaking precisely and rectangularly narrow glass strips made of aluminium 260 mm long up to 8 mm glass thickness
85 Grozing pliers hand made parallel bit of tongs bit of tongs 3 mm wide - 160 mm long - 8 mm wide
85-200/11 Grozing pliers hand made parallel bit of tongs bit of tongs 3 mm wide - 200 mm long - 11 mm wide
Grozing pliers for art glazing
88-130/8 140 mm long - 8 mm wide
88-160/5 160 mm long - 5 mm wide
88-160/8 160 mm long - 8 mm wide
90 Glass pincing pliers with tungsten carbide jaws for easy breaking-off of small glass pieces especially for round edges
10-8_Glass_Breaking_Pliers.doc 09.08.2006 Subject to changes 1/2
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Glass Breaking Pliers
Item-No. Description
716 Glass run pliers ideal for Tiffany- and art glazing up to a glass thickness of 5 mm
10-8_Glass_Breaking_Pliers.doc 09.08.2006 Subject to changes 2/2
Address: Postbox 26 54 D-23514 Luebeck Germany Phone: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Purchase Order
Customer-No.: ____________________________ Date: ____________________________ Delivery address: ____________________________ ____________________________ ____________________________ ____________________________ your order no :
Pannkoke Flachglastechnik GmbH Abteilung Vertrieb Postfach 26 54 23514 Luebeck
Pos. Item no. Quantity Unit Description Price
All prices in Euro and ex works Luebeck without packing ____________________________________________
Stamp and signature of the customer
x-1_PurchaseOrder.doc Besuchen Sie unsere Internet-Seite http://www.pannkoke.de
Terms of Delivery
Address Pannkoke Flachglastechnik GmbH Haendelweg 5, D-23556 Luebeck Postfach 2654, D-23514 Luebeck Telephone:main office: 0049 451 / 4 70 08 - 0 sales: 0049 451 / 4 70 08 - 10 Telefax: 0049 451 / 4 70 08 - 37 E-mail: [email protected] Internet: www.pannkoke.com
Prices Net prices Changes in price and errors excepted
Delivery ex works or on agreement to our attached terms of delivery
Packaging Packing material will be calculated to the prime costs
Payment our terms of payment are valid from the date of invoice 10 days less 2 % 30 days net without any deduction or as agreed
Validity the price-list on hand is valid from the 01. November 2007 all previous prices are no longer valid the right to make any necessary changes or corrections in prices is reserved.
Small orders for small orders up to EUR 30,00 value of goods we calculate a handling charge of EUR 10,00.
Order to avoid questions and/or delays please state in your order: Customer number, quantity and item number of the item
Complaints will only be accepted within 10 days after the date of invoice. Transport damages on the packing and / or on the goods have to be claimed immediately at the forwarder (post, railway authorities, forwarding agent).
Return delivery only with a copy of the invoice or the delivery note
x-2_TermsOfDelivery.doc Visit our Internet Page http://www.pannkoke.com
Sales and Supply Conditions
x-3_SalesAndSupplyConditions.doc 09.08.06 Page 1 of 2 Händelweg 5 - D-23556 Lübeck - Germany Tel.: +49/451/47008-0 Fax: +49/451/47008-37 Internet: www.pannkoke.de Email: [email protected]
§ 1 General
(1) The purchaser recognizes that the following business conditions are legally binding for all current and future goods and other services supplied by the seller. This applies in particular to the order issued. If the orderer is a full merchant, a legal entity of the public law or a special asset under public law, then this body proclaims agreement with these business conditions no later than when goods are accepted, the purchasing price is paid and details are clarified in any other way.
(2) All agreements reached between the orderer and ourselves, in particular revisions to these sales and supply conditions and spoken subsidiary agreements covering the content of the contract, require our written agreement before they can become effective.
§ 2 Quotes and prices
(1) Our quote and price lists are subject to change without notification. A supply obligation only comes into effect once a written order confirmation has been issued.
(2) Our prices are net prices and do not include the statutory level of value-added-tax.
(3) The prices are ex-factory (Lübeck) for unpackaged goods.
§ 3 Revisions to the agreed prices, payments and delayed payments
(1) If the orderer is a full merchant, a legal entity of the public law or a special asset under public law, then we reserve the right to increase the agreed prices in accordance with increases in wages and/or material prices to which we are jointly subjected, provided that we have not already supplied the goods. The orderer must be informed of the price increase at least two weeks before the supply deadline. Should prices be increased, the orderer has the right to withdraw from the order within one week of being notified of this price increase.
(2) Our invoices are to be paid within ten days from the invoice date for 2 % discount to apply or within thirty days to avoid a penalty. To benefit from the discount scheme, the orderer must have already settled all payment obligations outstanding from previous deliveries.
(3) If we accept bills of exchange or cheques, we operate on the basis of cleared funds or, in the case of bills of exchange, on the basis of credit rating. The orderer is responsible for expenditure incurred as part of the discount scheme. We accept no liability for the correct submission of bills of exchange and cheques or for action over bills of exchange and cheques which fail to clear.
(4) In instances of delayed payment, the orderer will have to pay interest amounting to the standard interest rate charged by the credit institute for overdraft facilities. This will however amount to at least 5 % more than the relevant discount rate of the Deutsche Bundesbank. We reserve the right to claim for further damages.
(5) Should the orderer fall behind with payments, all other debts outstanding from the business relations become due, even those which cannot yet be paid.
(6) Should the orderer raise any counterclaims, in particular those relating to complaints about the goods or to claims from credit notes for returned goods, right of retention is only permitted if counterclaims stem from the same contractual relationship.
(7) Offsetting claims with disputed or non-legally valid counterclaims are not permitted. Regardless of this, the offsetting claim must be served in writing one month before the invoice amount is due.
§ 4 Dispatch and insurance
(1) The orderer undertakes the risk associated with all shipments – including freight deliveries. This risk is transferred to the orderer when the goods are handed over
to the haulage contractor or freight carrier – or at the latest when the goods leave our plant.
(2) Packaging will be invoiced at cost price in addition to the agreed price and cannot be returned. Orderers will only be credited with 2/3 of the invoiced packaging price for crates returned in perfect condition and by prepaid freight.
(3) Unless otherwise informed, ten days after dispatch of the order confirmation, we will take out insurance with our transport insurer at the expense of the orderer for all kinds of custom-built glass tables and goods which are bulky and difficult to package. We will inform the orderer of the significance of the aforementioned deadline and the consequence of his not responding to the order confirmation. The premium is to be settled without any form of discount once the premium invoice is received. We do not however accept liability for correct and timely insurance cover being arranged.
§ 5 Supply deadlines and part deliveries
(1) The supply deadlines specified in the order confirmation commence when the order confirmation is sent off. These cannot fall due before submission of the documents, authorizations, and approvals are obtained by the supplier or before an agreed sum has been received as payment.
(2) The supply deadline is considered to be satisfied if the supply object has left the plant or has been declared ready for dispatch before the deadline expires.
(3) Should unforeseen circumstances occur or should events take place which are out of our control, the supply deadlines are extended by the period for which the hindrance lasts, including an appropriate start-up period. Unforeseen circumstances include strikes, lockouts and unpredictable circumstances e.g. interruptions to operation and such which do not enable us to meet the deadlines despite reasonable efforts. This also applies if the aforementioned conditions affect sub-suppliers. We are committed to immediately informing the orderer if unforeseen circumstances have arisen. If the aforementioned delays in output persist for more than three months due to unforeseen circumstances, then both parties are entitled to withdraw from the contract.
(4) Should, for reasons for which we alone are responsible, an agreed supply deadline not be observed, once an appropriate extension of at least four weeks has passed, the orderer is entitled to demand compensation for the delay in performance or to withdraw from the contract, provided that he indicated in writing that he would reject the service when imposing the extension.
(5) The orderer may not refuse appropriate part deliveries.
§ 6 Trial deliveries
(1) On request from the orderer, a delivery of tools, small machines and other devices can be made in accordance with a previously agreed deadline and including the return privilege. These goods are considered to be sold to the orderer at the specified price, if the orderer does not hand over the goods to the haulage contractor or freight carrier for dispatch within the return period or if he requests an extension to the deadline any time after four days before the deadline expires.
(2) The orderer will bear all dispatch costs and is to return the goods undamaged by return cargo and to take out insurance for the goods against all transportation risks.
(3) For deliveries worth up to DM 100,00, the orderer must pay a usage fee amounting to 10 % of the value of the goods and for deliveries worth more than the aforementioned value, the orderer shall pay a fee amounting to 5 % .
§ 7 Warranty
(1) Complaints relating to identifiable faults or incomplete deliveries must be raised immediately or no later than three days after the goods have been received by the orderer.
Sales and Supply Conditions
x-3_SalesAndSupplyConditions.doc 09.08.06 Page 2 of 2 Händelweg 5 - D-23556 Lübeck - Germany Tel.: +49/451/47008-0 Fax: +49/451/47008-37 Internet: www.pannkoke.de Email: [email protected]
Such complaints must always be raised before the goods are processed or installed and should be sent to us including precise information of the nature of the individual complaint. If complaints are not reported, we will assume that the goods were received in perfect condition. Faults which are not identifiable or those which only appear during the warranty period should be reported immediately and in writing.
(2) On request, we shall be given the opportunity on site to determine whether the accused fault is valid or to have this task undertaken by one of our representatives.
(3) We will correct valid complaints in good time and in the correct manner. We will decide whether this should take the form of correcting the fault (if necessary, also in conjunction with the relevant assembly services) or supplying spare parts. The orderer does, however, reserve the right to decide whether to demand a reduction in payment or to back out of the contract should we not be able to rectify the fault, whether this be as a result of unjust refusal or three attempts having been made to improve the situation or should a delivery of spare parts still not have rectified the fault.
(4) Additional claims from the orderer, in particular claims for compensation are restricted in accordance with § 8 or cannot be lodged at all.
§ 8 Liability
(1) In all instances where we are committed to pay compensation in damages as a result of contractual or legal grounds for claims and these instances are not covered by the above conditions, we only assume liability provided that our managerial level staff or people appointed by us can be held responsible for having acted deliberately or with gross negligence. If the orderer is a full merchant, a legal entity of the public law, or a special asset under public law over and above this, we will only assume liability for people appointed by us who are not managerial level in instances where they have acted deliberately. For cases of gross negligence we will only assume liability if this results in the infringement of our main obligations.
(2) When dealing with full merchants, legal entities of the public law or special assets under public law, our liability is restricted to DM 500.000 for each instances of damage. The maximum amount of liability payable for individuals is DM 250.000.
(3) If, an instance where our liability is restricted, as specified above, and a claim is lodged against us by a third party and this exceeds the aforementioned limits, the orderer must indemnify us from all claims for which we could not have been liable to the orderer and his staff in accordance with the aforementioned conditions.
(4) The above claims for damages lapse three years after the damage has occurred at the latest.
(5) The above liability exclusions and restrictions on liability do not apply for any claims for compensation in damages raised against us due to an absence of assured characteristics. The assurance of certain characteristics of the supply object must be included in writing in the order confirmation. This assurance does not cover the risk of secondary damage resulting from defects, provided that we, our managerial level staff or people appointed by us have not acted deliberately or with gross negligence.
§ 9 Advice and intellectual property rights
(1) If we advise the orderer, this takes place without our incurring a legal obligation.
(2) Quotes and drawings with which we provide the orderer, must not be disseminated to third parties, and especially not to competing companies.
§ 10 Retention of ownership
(1) Supplied goods continue to remain our property (conditional commodity) until the orderer has paid off all his outstanding debts liable to us. In instances where outstanding debts due to us or counterclaims raised by the orderer are covered by an overdraft or credit facility, retention of ownership continues to apply until the relevant balance of outstanding debts has been cleared.
(2) The orderer is authorized to use the conditional commodities. We can, however, revoke this authorization and request that the conditional commodity be returned as soon as the orderer does not comply with his payment obligations or does not do so on time. This also applies if one of the reasons for which our claims are prematurely lodged against the orderer arises and do so in accordance with the specifications laid down in this regulation. If retention of ownership is pursued, such action is considered as withdrawal from the contract.
(3) Furthermore, the orderer is entitled to sell his retention of ownership in accordance with correct business procedures. Before doing so, he transfers the claims resulting from the sale of the retention of ownership from us to the purchaser. We take on preliminary cession. Item (2) applies accordingly.
(4) If the value of the above covers exceeds the value of the claim to be covered by 20 %, then we are obliged, on request from the orderer, to free up deliveries of goods for which full payment has been received and we are free to chose the deliveries concerned.
(5) If the orderer does not comply with his payment obligations or does not satisfy his commitments to us resulting from the retention of ownership, if a bill of exchange or a cheque is not cashed, if he does not make payments or if judicial or out-of-court concilation procedure or bankruptcy proceedings are opened against his assets, then all of the orderer's debt due to us becomes liable immediately, even if we have agreed upon payment by instalments or if bills of exchange are post-dated. We are then entitled to sell by private contract the conditional commodities which we repossess regardless of payment obligations. Our rights, as specified in § 326 of the BGB (German Criminal Code) are not affected by this. Furthermore, we can withdraw from other as yet unfulfilled contracts with the same orderer irrespective of more extensive rights contained therein.
(6) With regard to claims arising from the retention of ownership or deferred payments, the orderer cannot appeal that he needs the conditional commodity for special reasons, e.g. to maintain his business.
§ 11 Site of fulfilment and court of jurisdiction
(1) If the orderer is a full merchant, a legal entity of the public law, or a special asset under public law, then in all disputes arising from the contractual relationship, legal proceedings should be raised at the court responsible for the headquarters of the supplier or responsible for the regional office which handles deliveries. The supplier also has the right to institute proceedings at the orderer's headquarters.
(2) The contractual relationship is subject to the law of the Federal Republic of Germany. The Standard German Law governing the international sale of non-real estate property, dated 17 July 1973 cannot be applied.
April 1991 PANNKOKE Flachglastechnik GmbH
Index
Description Item-No. Group Page
3-point-pliers 81-20 5 Glass breaking pliers 4
Abrasive pencil 809 8/9 Accesorries for small-size machines
1
Abrasive stone 629 8/9 Drilling of glass 8
Additonal plate for profile glass cutting angle
389-ZP 7 Glass cutting equipment 4
Badger hair brush 161 10 for Glass painting 1
Block lever 555-KU 5 Glazing equipment 2
Block lever 555-HOLZ 5 Glazing equipment 3
Button suction cup 531 3 Suction handles 1
Carrying belt 559-803/H 3 Transport equipment 4
Castor roller 330 2
Cavity pliers 77 5 Glass breaking pliers 1
Charger 823-Aufl. 8/9 Small size machines 3
Circle & oval cutter 233-10/40 7 Glass cutting equipment 7
Circle and oval cutting machine 232-20/120 7 Glass cutting equipment 6
Circle and oval cutting machine 232-20/120 10 Glass cutting equipment 3
Circle cutter 227 7 Glass cutting equipment 6
Circle cutter 228 7 Glass cutting equipment 6
Circle cutter 228 10 Glass cutting equipment 3
Circle cutting machine 230 7 Glass cutting equipment 5
Cork distance pads 351 2
Cork polishing belt 676 8/9 Small size machines 3
Cork polishing belt 677 8/9 Small size machines 4
Corner shoe 373 3 Transport equipment 4
Counter sink diamond 137-0/35 8/9 Drilling of glass 7
Cutting and break-out bar 390 7 Glass cutting equipment 3
Cutting and break-out bar 390 10 Glass cutting equipment 2
Cutting blade for compass saw 815 / 816 8/9 Accesorries for small-size machines
1
Cutting emulsion 50 7 Cutting emulsion 1
Cutting emulsion 50-BES 7 Cutting emulsion 1
Cutting slide Pannkoke 138 7 Glass cutting equipment 1
Cutting slide Pannkoke 138 10 Glass cutting equipment 1
0-3_Index_GB.doc 25.01.2008 . 1/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Index
Description Item-No. Group Page
Diamond drill 136 8/9 Drilling of glass 5
Diamond saw blade 823-ES 8/9 Small size machines 2
Diamond saw blade 823-ES 8/9 Accesorries for small-size machines
1
Diamond segments 134 8/9 Drilling of glass 3
Double grip belt 565 3 Transport equipment 3
Double hand smoother 251 5 Work protection 2 1
Double-bladed pattern knife 122 10 for Art glazing 1
Drill adapter R ½“ 132-10 8/9 Drilling of glass 1
Drilling stand 651 8/9 Drilling of glass 1
Drilling stand 651-FUSS 8/9 Drilling of glass 2
Etching ink 129 7 for Marking 2
Etching ink 129 10 for Marking 1
Extension 232-VL 7 Glass cutting equipment 7
Extension 232-VL 10 Glass cutting equipment 3
flexible suction handle 535 3 Suction handles 2
GeRO Glass hand carrier, movable 374/GERO50 3 Transport equipment 2
Glas-O-Meter 69-GO 7 Measuring tools 1
Glas-O-Meter 69-GO 10 Measuring tools 1
Glass breaking pliers 200/4 5 Glass breaking pliers 3
Glass breaking pliers 716 5 Glass breaking pliers 3
Glass breaking pliers 81 5 Glass breaking pliers 4
Glass carrying gloves 411-10 5 Work protection 2
Glass carrying gloves 411-ST 5 Work protection 2
Glass cutter 61-100 7 Glass cutter 1
Glass cutter 61-100 10 Glass cutter 1
Glass cutter HOBBY LONGLIFE 52-424 7 Glass cutter 1
Glass cutter HOBBY LONGLIFE 52-424 10 Glass cutter 1
Glass hand carrier doppelseitig 374/D50 3 Transport equipment 2
Glass Offloading Frame 601/5 2
Glass Offloading Frame 601-BAND 2
Glass Offloading Frame 607 2
Glass pincing pliers 90 5 Glass breaking pliers 2
Glass pincing pliers 90 10 Glass breaking pliers 2
0-3_Index_GB.doc 25.01.2008 . 2/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Index
Description Item-No. Group Page
Glass Rack 482L 2
Glass run pliers 716 10 Glass breaking pliers 2
Glass scraper 34 5 Glass scraper 2
Glass thickness measuring tool 66 7 Measuring tools 1
Glass thickness measuring tool 66 10 Measuring tools 1
Glazier Table 432 2
Gloss-paint for edges 664 8/9 for polishing 1
GREIF-ZU Suction lifter 1-point 386/1 3 Suction handles 1
GREIF-ZU Suction lifter 2-point 386/2 3 Suction handles 1
GREIF-ZU Suction lifter 3-point 386/3 3 Suction handles 1
Grinding belt 670 8/9 Small size machines 3
Grinding belt 671 8/9 Small size machines 4
Grinding disk 444-ES 8/9 Accesorries for small-size machines
2
Grinding disk 442-ES 8/9 Accesorries for small-size machines
2
Grinding disk 442-V/ES 8/9 Accesorries for small-size machines
2
Grinding file MAKITA 803 8/9 Small size machines 4
Grozing pliers 85 10 Glass breaking pliers 1
Grozing pliers 88 10 Glass breaking pliers 1
Hacking knife 21 5 Hacking knives etc. 1
Hacking knife DON CARLOS 25 5 Hacking knives etc. 1
Hacking knife DON CARLOS 25-G 5 Hacking knives etc. 1
Hand belt 567 3 Transport equipment 3
Hand rubbing stone 252 5 Work protection 1
Handlap 410-1.6 3 Transport equipment 5
Handlap 410-1.6 5 Work protection 1
HM Glass cutter 64-400 7 Glass cutter 2
HM Glass cutter 64-400 10 Glass cutter 2
Holder for blades 35 5 Glass scraper 1
Installation aid MMK-MTH/SV 7 Cutting wheels 2
0-3_Index_GB.doc 25.01.2008 . 3/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Index
Description Item-No. Group Page
KaHa-pins 5 Glazing equipment 1
Lath scissors LOEWE 367 5 Glazing equipment 1
Lead burnisher 118 10 for Art glazing 1
Lead hammer 28 10 for Art glazing 2
Lead knife DON CARLOS 101 10 for Art glazing 1
Lead knife DON CARLOS 104 10 for Art glazing 1
Lead knife DON CARLOS 503 10 for Art glazing 1
Lead nails 119 10 for Art glazing 3
Lead stretcher 445 10 for Art glazing 2
Leather apron – half size 246 5 Work protection 3
Lift-off suction cup 538 3 Suction handles 1
Manual grinding machine MAKITA 802 8/9 Small size machines 3
Marking chalk 130 7 for Marking 1
Marking tool 53 7 for Marking 1
Marking tool 53-KU 7 for Marking 1
Marking tool 53 10 for Marking 1
Marking tool 53-KU 10 for Marking 1
MICRO-Glass cutter 61-2004 7 Glass cutter 2
MICRO-Glass cutter 61-2004 10 Glass cutter 2
Mini diamond circular saw with accumulator
823 8/9 Small size machines 2
Nipple joint 132 8/9 Drilling of glass 1
Off-set glass pliers 83 5 Glass breaking pliers 1
Oil-Glass cutter 259-447.8 7 Glass cutter 3
Oil-Glass cutter 261-448.8 7 Glass cutter 3
Oil-Glass cutter 259-447.8 10 Glass cutter
Oil-Glass cutter 261-448.8 10 Glass cutter 3
PALUE 3-point pliers 81 10 Glass breaking pliers 1
Parallel jaws 85 5 Glass breaking pliers 1
Parallel jaws 88 5 Glass breaking pliers 2
Pattern shears 120 10 for Art glazing 2
Pin hammer 47 5 Glazing equipment 1
0-3_Index_GB.doc 25.01.2008 . 4/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Index
Description Item-No. Group Page
Plastic glazier’s square 205 7 Glass cutting equipment 2
Plastic glazier’s square 205-ST 7 Glass cutting equipment 3
Plastic glazier’s square 205 10 Glass cutting equipment 2
Plastic putty scraper 568 5 Glazing equipment 3
Plastic support 265.4 7 Cutting wheels 2
Plastic support 265-7 7 Cutting wheels 3
Plastic support 265-6 7 Cutting wheels 4
Plastic support 265-8 7 Cutting wheels 5
Plate glass carriage 496 3 Transport equipment 1
Pneumatic edge decoating equipment 444 8/9 Small size machines 1
Power-Grip 284 3 Safety suction handles 2
Power-Grip 284-KU 3 Safety suction handles 3
Profile glass cutting angle 398 7 Glass cutting equipment 4
Putty knives bent, high polished, continuous blunt blade
6 5 Putty knives 1
Putty knives blunt, bent, continuous blade
0/18 5 Putty knives 1
Putty knives pointed blade
3 5 Putty knives 1
Putty knives pointed blade
10 5 Putty knives 2
Putty knives Swedish Design bevelled, continuous blade
12 5 Putty knives 2
Putty knives SWISS DESIGN
8 5 Putty knives 1
Quick-release support MMK-SWH/SV 7 Cutting wheels 1
Quick-release support MMK-SWH/FL 7 Cutting wheels 6
Radius cutter 225 7 Glass cutting equipment 5
Red marten brush 162 10 for Glass painting 2
Ripping knife 22 5 Hacking knives etc. 1
Round copper bit - both sides 185 10 for Art glazing 4
Round copper bit - hammer tip 184 10 for Art glazing 4
Round copper bit - pointed, round tip 187 10 for Art glazing 4
Round copper bit - forged on 189 10 for Art glazing 4
0-3_Index_GB.doc 25.01.2008 . 5/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Index
Description Item-No. Group Page
Round copper bit - pointed 188 10 for Art glazing 4
Round-edge template 224-A 7 Glass cutting equipment 4
Ruler stop 394 7 Glass cutting equipment 5
Safety Suction Handle 295 3 Safety suction handles 1
Safety Suction Handle 293 3 Safety suction handles 1
Safety Suction Handle PALUE 384 3 Safety suction handles 2
Scraping blade box 36 5 Glass scraper 1
Scraping knife 569 5 Glazing equipment 3
Scratching knife 26 5 Hacking knives etc. 1
Shoulder belt 560-D 3 Transport equipment 3
Sigla-knife 37 5 Glass scraper 2
Soft rubber strips 326 2
Soldering iron HOBBYKIT 2 176 10 for Art glazing 5
Soldering iron PROFIKIT 100 178 10 for Art glazing 6
Soldering iron PROFIKIT 200 190 10 for Art glazing 7
Soldering iron ZEVA 173 10 for Art glazing 3
Soldering tinn 121-65 10 for Art glazing 5
Soldering tip - 45 degree 178-SG40 10 for Art glazing 6
Soldering tip - bent 178-SG43 10 for Art glazing 7
Soldering tip - bent 190-SG53 10 for Art glazing 7
Soldering tip - hammer tip 190-SG50 10 for Art glazing 7
Soldering tip - hammer tip 190-SG51 10 for Art glazing 7
Soldering tip - straight 178-SG41 10 for Art glazing 6
Soldering tip - straight 190-SG52 10 for Art glazing 7
Soldering tip with groove 178-SG42 10 for Art glazing 6
Spare accumulator 823-A 8/9 Small size machines 2
Spare axle MMK-HMA/SV 7 Cutting wheels 1
Spare axle MMK-HMA/FL 7 Cutting wheels 6
Spare blades 34-KL 5 Glass scraper 2
Spare blades 37-KL 5 Glass scraper 2
Spare blades 122-K 10 for Art glazing 2
Spare cutting head 259-447.1 7 Glass cutter 3
Spare cutting head 261-448.1 7 Glass cutter 3
0-3_Index_GB.doc 25.01.2008 . 6/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Index
Description Item-No. Group Page
Spare cutting head 259-447.1 10 Glass cutter 3
Spare cutting head 261-448.1 10 Glass cutter 3
Spare glass cutter 52-425 7 Glass cutting equipment 7
Spare grinding disk 444-ES 8/9 Small size machines 1
Spare lever 228-ES 7 Glass cutting equipment 6
Spare lever 228-ES 10 Glass cutting equipment 3
Spare roller 251-EW150 5 Work protection 2 1
Spare rosette 63-101 7 Glass cutter 2
Spare rosette 64-401 7 Glass cutter 2
Spare rosette 63-101 10 Glass cutter 2
Spare rosette 64-401 10 Glass cutter 2
Spare slide 139 7 Glass cutting equipment 1
Spare slide 139-R 7 Glass cutting equipment 1
spare slide 231 7 Glass cutting equipment 6
Spare slide 139-R 10 Glass cutting equipment 1
Spare slides 139 10 Glass cutting equipment 1
Spare sucker 286-ES 3 Safety suction handles 3
Spare sucker 385/ES110 3 Suction handles 3
Spare sucker 385/ES120 3 Suction handles 3
Spare sucker 386/ES110 3 Suction handles 1
Spare suczion cup 385/ES120 3 Transport equipment 4
Spare wheel holder 232-ESK 7 Glass cutting equipment 7
Spare wheel holder 52-Rad-Trg 7 Glass cutting equipment 7
Spare wheel holder 52-Rad-Trg 7 Glass cutter 1
Spare wheel holder 52-Rad-Trg 10 Glass cutter 1
Spare wheel holder 232-ESK 10 Glass cutting equipment 3
Spare wheels 60-102 7 Glass cutter 1
Spare wheels 265-2.135 7 Glass cutter 2
Spare wheels 60-102 10 Glass cutter 1
Spare wheels 265-2.135 10 Glass cutter 2
Splitting tool 551 5 Glazing equipment 2
Splitting tool 551-HO 5 Glazing equipment 2
Spring clamp 393-F 7 Glass cutting equipment 5
0-3_Index_GB.doc 25.01.2008 . 7/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Index
Description Item-No. Group Page
Spring tape measure NICHOLSON 67/3.5 7 Measuring tools 2
Spring tape measure NICHOLSON 67/3.5 10 Measuring tools 2
Spring tape measure PANORAMIC 67/3PAN 7 Measuring tools 2
Spring tape measure PANORAMIC 67/3PAN 10 Measuring tools 2
Spring tape measure STANLEY 67/3ST 7 Measuring tools 2
Spring tape measure STANLEY 67/3ST 10 Measuring tools 2
Spring tape measure STANLEY 67/5F 7 Measuring tools 2
Spring tape measure STANLEY 67/5F 10 Measuring tools 2
Stabilizing suction cup 375 3 Suction handles 2
Stand for soldering iron 175 10 for Art glazing 8
Stearin oil 117-1 10 for Art glazing 5
Suction head 537 3 Suction handles 1
Suction ring 630 8/9 Drilling of glass 2
Suction ring 632 8/9 Drilling of glass 2
Suction ring 631 8/9 Drilling of glass 2
Support block 238 3 Transport equipment 4
Support profile 321 2
Supporting blocks and spacers of knotless hardwood
720 6 Supporting blocks and spacers
1
Supporting blocks and spacers of polypropylene (PP)
725 6 Supporting blocks and spacers
1
TC-cutting wheels SILBERSCHNITT 265-2 7 Cutting wheels 1
TC-cutting wheels SILBERSCHNITT 265-3 7 Cutting wheels 1
TC-cutting-wheels ACTIVE SILBERSCHNITT
270-3 7 Cutting wheels 6
Thermo regulator 174 10 for Art glazing 5
Tip chisel shape 176-SG11 10 for Art glazing 6
Tip chisel special form 176-SG12 10 for Art glazing 6
Tip Longlife 176-SG10 10 for Art glazing 5
Tragboy 276 3 Transport equipment 5
Tragkuli 277 3 Transport equipment 5
Transport case 295-K 3 Safety suction handles 1
Universal holder 195-KH30 10 for Art glazing 8
VERIBOR Suction lifter 286 3 Safety suction handles 3
0-3_Index_GB.doc 25.01.2008 . 8/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com
Index
Description Item-No. Group Page
VERIBOR Suction lifter 1-point 385/0 3 Suction handles 1
VERIBOR Suction lifter 1-point 385/0KU 3 Suction handles 1
VERIBOR Suction lifter 2-point 385/2 3 Suction handles 1
VERIBOR Suction lifter 2-point 385/2KU 3 Suction handles 1
VERIBOR Suction lifter 2-point - angular
385/2WZ 3 Suction handles 2
VERIBOR Suction lifter 2-point - flexible
385/2G 3 Suction handles 2
VERIBOR Suction lifter 2-point - flexible
385/2GG 3 Suction handles 2
VERIBOR Suction lifter 3-point 385/3 3 Suction handles 3
Water rinse head 655 8/9 Drilling of glass 1
Windshield tool 38 5 Glazing equipment 4
Windshield tool 38-ALU 5 Glazing equipment 4
Windshield tool 38-HOLZ 5 Glazing equipment 4
Windshield tool pare loop for windshield tool
38-OESE 5 Glazing equipment 4
Wire glass pliers 100 5 Glass breaking pliers 2
Wrist protectors 557-F 5 Work protection 1
0-3_Index_GB.doc 25.01.2008 . 9/9
Address: Postfach 26 54 D-23514 Luebeck Germany Telefon: +49 451 47008-0 e-Mail: [email protected] Haendelweg 5 D-23556 Luebeck Telefax: +49 451 47008-37 Internet: http://www.pannkoke.com