Date post: | 08-Jan-2017 |
Category: |
Education |
Upload: | gabriela-technoteacher |
View: | 5,571 times |
Download: | 0 times |
Tools and actions at the workshop
de Tecnología
gabriela-teacher.blogspot.com
Drawing tools
gabriela-teacher.blogspot.com
To draw the pieces of a project, we always need our set squares, ruler or measuring tape and our pencil. We may also need a protractor.
We need to draw accurately (precisely).
Hammer / Nails
gabriela-teacher.blogspot.com
We use the hammer to drive nails.
Nails are made out of iron.
Claw hammer
gabriela-teacher.blogspot.com
We use the claw hammer to remove nails.
Screwdrivers
gabriela-teacher.blogspot.com
We use the screwdrivers to drive screws.
This is a flat screwdriver.
This is a phillips screwdriver.
Screws
gabriela-teacher.blogspot.com
Screws are used to hold pieces. There are many types of screws made out of different metals.
Screws can have flat head or phillips head.
Screw and unscrew
gabriela-teacher.blogspot.com
When we screw we drive the screw in.
When we unscrew we drive the screw out.
Cloc
kwise
Coun
terc
lock
wise
Bolts and nuts
gabriela-teacher.blogspot.com
Bolts are specific screws that need a nut to fasten pieces.
Nut
Bolt
Washers
gabriela-teacher.blogspot.com
When working with screws and bolts, we sometimes need washers. Washers can have many differents functions.
Gimlet
gabriela-teacher.blogspot.com
Gimlets are used to drill small holes manually.
File
gabriela-teacher.blogspot.com
Files are used to file or rasp wood or metal and make it smooth.
Sandpaper
gabriela-teacher.blogspot.com
We use sandpaper to sand or rasp wood or metal and make it smooth. It can also be used to remove paint.
Bench vice
gabriela-teacher.blogspot.com
We use a bench vice to secure an object when we are going to cut, file, drill, glue…
Wood glue
gabriela-teacher.blogspot.com
We use wood glue to join or glue pieces of wood.
Thermal glue
gabriela-teacher.blogspot.com
We use thermal glue to join or glue pieces of different materials.
We use a thermal glue gun to apply the glue.
This is a very dangerous tool.
Column drill
gabriela-teacher.blogspot.com
We use the column drill to make holes in different materials.
The bits are the pieces of metal that make the holes.
Electric saw
gabriela-teacher.blogspot.com
The electric saw is used to cut different materials.
The blade is the piece of metal that cuts the material.
Fretsaw
gabriela-teacher.blogspot.com
The fretsaw is used to cut thin materials such as plywood, cardboard or plastics.
The fretsaw blades are very thin and fragile.
gabriela-teacher.blogspot.com