24
Toll Free - USA & Canada
(800) 562-8782Order Your Catalogs & Parts Online
www.LMCTrUCk .com ¿Habla Español? (855) 456-2288
TOOLS
PART DESCRIPTION PRICE
38-1335 WIPER ARM TOOL $5.95
Sheet Metal
and Flex Edge
Body Panel
Alignment Shims
30-2826
30-2827
30-2828
30-2829
Spot Weld Cutter
Quickly drills out spot welds on body panels. Features 1/4" arbor and double-ended 3/8" diameter cutting blade with retractable pilot to ensure accurate cuts without damage to underlying panel.
38-1307
Panel and Trim removal
Tool Set
Five-piece Panel and Trim Removal Tool Set can be used to remove interior and exterior trim, fasteners, moldings and panels. Constructed of heavy-duty plastic for strength and flexibility. Call or go online and order yours today!
Plug Weld Pliers
Spot weld your new rockers or other body panels with ease and have a factory style weld to show for it. The Plug Weld Pliers feature locking jaws and a replaceable copper alloy pad to prevent burn through. Replacement pads sold below.
38-1318
Steering Wheel Puller
Steering Wheel Puller features forged, milled yoke and center screw with pointed/removable adaptor. Includes five sets of bolts in standard and metric sizes. Can also be used to remove pulleys, flanges and gears.
38-1199
Fastener removal Tool
This tool effectively removes the plastic fasteners found on most door panels. Working end is offset for ease of access.
Wiper Arm Tool
Wiper Arm Tool provides the leverage needed to safely remove and install wiper arms without damaging the vehicle.
Adhesive/Stripe
Eraser Wheel
Easily remove decals, pinstriping and adhesive tape residue without damaging your paint! This 3-1/2" diameter eraser wheel includes the arbor and is designed for use in air or electric drills at speeds up to 4000 rpm.
38-1314
This Hand Riveter Set includes one hand riveter and 60 blind rivets. Great for installing side molding, grille panels, sun visor mounts, bumper supports and much more.
Also includes four nozzles for 3/32", 1/8", 5/32" and 3/16" blind rivets.
38-1239
Air Hold Fittings and
Valve Spring Compressor
Remove or replace valve springs and/or valve guide seals without taking the cylinder head off the engine. Use by removing rocker arm
and fastening the tool to rocker stud with rocker nut, then use an air hold fitting and compressed air to hold valves up.
30-5088 30-5089
Hand riveter Set ...
Makes rivet Installation
Easy
Tech Tip: All locking pins or retaining nuts must be removed before using the Wiper Arm Tool.
21-1/2"
36-1/2"
Sheet Steel Flex Edge
38-1238
PART DESCRIPTION PRICE
30-5088 AIR HOLD FITTING SET $4.95
30-5089 VALVE SPRING COMPRESSOR $10.95
PART DESCRIPTION PRICE
38-1199 STEERING WHEEL PULLER $24.95
PART DESCRIPTION PRICE
38-1318 PLUG WELD PLIERS $25.95
38-1319 REPLACEMENT PAD $8.95
PART DESCRIPTION PRICE
38-1307 SPOT WELD CUTTER-3/8" $8.99
38-1396 REPL HEAD-3/8"-3 PACK $11.95
PART DESCRIPTION PRICE
38-1239 HAND RIVETER SET $8.95
PART DESCRIPTION PRICE
38-8245 PANEL & TRIM TOOL SET-5PC $9.95
PART DESCRIPTION PRICE
30-2826 SHIM 1/16" THICK 3/8" SLOT $.49
30-2827 SHIM 1/8" THICK 3/8" SLOT $.49
30-2828 SHIM 1/16" THICK 1/2" SLOT $.49
30-2829 SHIM 1/8" THICK 1/2" SLOT $.49
PART DESCRIPTION PRICE
38-1238 FASTENER REMOVAL TOOL $4.99
PART DESCRIPTION PRICE
38-1314 ADHESIVE/STRIPE ERASER WHEEL $14.95
PART DESCRIPTION PRICE
38-7772 STEEL-36" X 43" 20GA $33.95*
38-7773 STEEL-36-1/2"X21-1/2" 20GA $19.95
38-7897 FLEX EDGE-3/4"X36"X3" 22GA $11.95
* After the sell price means Oversize Part Charge. Your order will incur a charge of $20.00 for each oversized part. Due to packing and/or transportation requirements, please allow additional time for delivery. Oversized Parts are not available for air delivery.