#AF565ESP7 (110) Effortless using remote hand control • Low height - 8/34”, high height 21-1/2” • Overload protection. 22 Ton Air & Hydraulic Truck Jack with FREE Impact American Forge & Foundry 1” Impact Wrench FREE 400.00 VALUE #Af7685 ” I FREE #A 695.00 Good Thru 6/30/17 2 or more, FREE FREIGHT Within Continental USA MORE INFO PAGE 30 319.00 1/2” Titanium Composite Impact #IR2235TiMAXPR NEW Next Gen Titanium INCLUDES FREE SUPER DUTY AIR HAMMER #IR121Q $175.00 VALUE *Limited quantity available. While supplies last. 1350 ft. lbs. of NUT BUSTING TORQUE! ONLY 4.6 LBS • 8500 RPM • 930 Ft Lbs Max ................... Air Impact Compact 1/2“ 99.95 #AC1055THKP INCLUDES FREE RAZOR SHARP POCKET KNIFE • 3-1/4” stainless blade, 7-1/2“ open • Switch blade with trigger release ........................... Jumbo mechanism for durability, Patented Quiet Technology built in, 1600 impacts/min, 500 ft lbs. torque. #LI92102 (30) ............................ 79.95 Molded polyethylene plastic • 38” long x 17-1/2” wide x 3-5/8” high • 7/8 Floor clearance • “Almost Indestructible” Lisle 4” High 7/8” Floor Clearance Low Profile Creeper MADE IN THE USA Air Hammer #CP7111FLASH (5) 59.95 3500 BPM INCLUDES FREE RECHARGEABLE LED FLASHLIGHT 70.00 VALUE Chicago Pneumatic 70 00 VALUE 10” Snips Straight cut and wire curves #2073113 ............. 15.75 MADE IN THE USA #KTi72121A 3/8” Drive (with case) 10-100 ft lbs 129.95 #KTi72126A 1/2” Drive (with case) 30-250 ft lbs 169.95 #KTi72176A 3/4” Drive (with case) 100-600 ft lbs 499.95 Model # Torque Price Drive TORQUE WRENCHES • Positive lock with spring loaded pull down lock ring • Serialized with matching certificate of calibration with N.I.S.T. • Feature quick release buttons which provide good socket retention as well as easy socket removal (except KTI72176A) • Each comes in a blow molded case • Accuracy: ± 4% clockwise ± 6% CCW of indicated value, CW, from 20% to 100% of full scale • Meets or exceeds ASME B107.14M-1994, ISO 6789 Standards • Covered by a 1-Year limited warranty 100 ft lbs 12 50 ft lbs MADE IN THE USA o r que Price ng with N.I.S.T. ndards N A .................... 159.95 3/8” Light Weight Ultra Compact Butterfly Impact INCLUDES FREE #AC807 Ratchet $100.00 VALUE 80 ft. lbs Torque, Swivel Inlet, 3 Position Power Regulator, 1.1 lbs and 5.4” long fits in palm. #AC1320807 (4) ONLY 1.1 LBS 3/4” Impact 1000 Ft Lbs of Torque 1/2” Impact 425 Ft Lbs of Torque #CP772H ..............398.00 #CP734H ..............129.95 CLASSIC TOOLS CARRY A 2-YEAR WARRANTY BUY BOTH TOOLS 469.00 Smoothest operating 3/4” impact on the market! ONLY 10.5 LBS BOTH TOOLS FEATURE ONE HAND PUSH BUTTON FWD / REV *LIMITED QTY AVAILABLE Call 1-800-537-1993 www.toolsunlimited.com 2017 - B00135118 - ISSUE #40
Transcript
#AF565ESP7 (110) Effortless using remotehand control • Low height - 8/34”, highheight 21-1/2” • Overload protection.
22 Ton Air & Hydraulic Truck Jack with FREE Impact
American Forge & Foundry
1” Impact Wrench
FREE400.00 VALUE
#Af7685” I
FREE#A
695.00 Good Thru 6/30/17
2 or more, FREE
FREIGHTWithin Continental USA
MORE INFOPAGE 30
319.00
1/2” TitaniumComposite Impact
#IR2235TiMAXPR
NEWNext GenTitanium
INCLUDES
FREE SUPER DUTY AIRHAMMER #IR121Q
$175.00 VALUE*Limited quant i ty avai lable.
Whi le suppl ies last .
1350 ft. lbs. of NUT BUSTING TORQUE!ONLY 4.6 LBS • 8500 RPM • 930 Ft Lbs Max
Jumbo mechanism for durability, Patented Quiet Technology built in, 1600 impacts/min, 500 ft lbs. torque.
#LI92102 (30) ............................ 79.95
Molded polyethylene plastic
• 38” long x 17-1/2” wide x 3-5/8” high • 7/8 Floor clearance
•“Almost Indestructible”
Lisle
4” High
7/8” FloorClearance
Low ProfileCreeper
MADE INTHE USA
Air Hammer
#CP7111FLASH (5) 59.953500 BPM
INCLUDES FREERECHARGEABLELED FLASHLIGHT
70.00 VALUE
ChicagoPneumatic
70 00 VALUE
10” SnipsStraight cut and wire curves
#2073113 ............. 15.75
MADE INTHE USA
#KTi72121A 3/8” Drive (with case) 10-100 ft lbs 129.95#KTi72126A 1/2” Drive (with case) 30-250 ft lbs 169.95#KTi72176A 3/4” Drive (with case) 100-600 ft lbs 499.95
Model # Torque PriceDrive
TORQUE WRENCHES• Positive lock with spring loaded pull down lock ring• Serialized with matching certificate of calibration with N.I.S.T.• Feature quick release buttons which provide good socket retention as well as easy socket removal (except KTI72176A)• Each comes in a blow molded case• Accuracy: ± 4% clockwise ± 6% CCW of indicated value, CW, from 20% to 100% of full scale• Meets or exceeds ASME B107.14M-1994, ISO 6789 Standards• Covered by a 1-Year limited warranty
100 ft lbs 1250 ft lbs
MADE INTHE USA
orque Price
ngwith N.I.S.T.
ndards
NA
.................... 159.95
3/8” Light WeightUltra CompactButterfly Impact
INCLUDES
FREE#AC807 Ratchet$100.00 VALUE
80 ft. lbs Torque, Swivel Inlet, 3 Position PowerRegulator, 1.1 lbs and 5.4” long fits in palm.
HEAVY DUTY PLIERS for the Professional - Lifetime Gauratee
Groove Joint Pliers
#MT342026” Needle NoseCross cut teeth and twin blade wire cutters Snips coper, aluminum and soft steel wire
#MT340137” High Leverage Diagonal Cutting PliersCuts copper, alum, soft steel wire in solid, stranded, and braided forms • Twin blades are induction hardened
#MT3440111” Long Reach Straight Cross cut teeth grip evenly in any direction
#MT3443510-1/2” Long Reach Hose Ring PliersRounded jaws with Cross cut teeth
AlwaysGuaranteed
8” Heavy Duty Lineman Pliers• Cross Cut Teeth for even grip in any direction• Twin blade wire cutter• Non slip grip
• High Strength 4150 Alloy Steel• Non slip grip• Angled Teeth for better grip• High leverage
USA MADEAlways
Guaranteed
AlwaysGuaranteed
Individual Pliers
Heavy Duty Long Reach Pliers
Always Guaranteed
H.D. Slip Joint Pliers
Always GuaranteedUSA MADE
• With 3 zone jaws & wire shear• High strength 4150 alloy steel• Non slip grip
#MP9401 (5) Operates both internal and external rings • Comfortable insulated vinyl handles • Set includes: 5-1/2” bend pliers with .038” tip, 6” straight pliers with .038” tip, 5-1/2” bend pliers with .0447” tip, 6” straight pliers with .047” tip, 7-1/2” bend pliers with .07” tip, 8” straight pliers with .070” tip, 8-1/2” bend pliers with .090” tip, 9” straight pliers with .090” tip, 1-5” hook tool, 1-5” pick tool, blow molded case.
Micro-adjustable for quick pre-adjusting and repeat clamping.
• Accuracy rating is +/- 6%• Tool length: 19.500", body length 6.500", reaction bar length: 15.625", head width: 3.750", female depth: .750", male depth: 1.125", head depth from female to male: 4.500"
• Shipping weight: 19 lbs.
• Comes in a convenient plastic, blow-molded carrying/storage case.
Quick Release Buttons with Ergonomic Comfort-GripTorque Wrenches
#KTi72121A 3/8” Drive (with case) 10-100 ft lbs 129.95#KTi72126A 1/2” Drive (with case) 30-250 ft lbs 169.95#KTi72176A 3/4” Drive (with case) 100-600 ft lbs 499.95
Model # Torque PriceDrive
• Dual scale, calibrated dual direction• Made in the USA• Positive lock with spring loaded pull down lock ring• Fast, accurate and easy to set with ergonomic comfort-grip• Easy-to-read laser marked scales• Individually serialized with matching certificate of calibration traceable to N.I.S.T.• Most feature quick release buttons which provide good socket retention as well as easy socket removal (except KTI72176A)• Each comes in a blow molded case• Accuracy: ± 4% clockwise ± 6% CCW of indicated value, CW, from 20% to 100% of full scale• Meets or exceeds ASME B107.14M-1994, ISO 6789 Standards• Covered by a 1-Year limited warranty
• Ratchets with built in speed disc: 1/4” x 5-1/2”, 3/8” x 8”, 1/2” x 10” • Spin disc: 1/4, 3/8 & 1/2 • Extensions: 1/4” dr. - 2” & 4”, 3/8” dr. - 1-3/4 x 3”, 1/2 dr. - 17” Flex breaker bar • 1/4” dr. - 6” Spinner handle and universal joint
60 Pc 1/4, 3/8, & 1/2” Drive Professional Socket Set
#MP1115 extension bar • box • 3/4 SAE set 6 point 16 pieces • consisting of 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-5/8”, 1-3/4”, 1-13/16”, 1-7/8”, 2” • 36 lbs.
TEKTON PROFESSIONALQUALITY SOCKET SETS
ON SALE... LIMITED
QUANTITIES!
3 Piece Chrome Extension Sets
BREAKER BARS & EXTENSIONS
1/2” & 3/4” Breaker Bars
1/2” Drive#MT1606 (4)
3/8” Drive#MT1601 (4)
1/2” x 15” Long#MT15355 ............................16.953/4” x 24” Long#MT15207 ............................24.95
• Breaks loose rusted or stuck nuts and bolts
• Spring loaded ball bearing retains sockets
1/4” Drive 51 Pc Master Socket Set#KD80300/10/11 (6) 6 Pt. SAE / Metric Socket Set, 3/16” - 9/16” standard and deep sockets, 4-5.5, 6-15mm Standard and deep sockets, 1/4” Teardrop ratchet and 1/4” thumbwheel ratchet, Universal joint.
129.95
• 12 Pc Metric 6 pt Flex Socket Set #KD80311 1/4” Dr. 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15mm
• 7 Pc SAE 6 pt Flex Socket Set #KD80310 1/4” Dr. 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16”
FREEWITH THIS SET, LIMITED QUANTITIES
MASTER SOCKET SETS
3/8” Drive Set Contains• 3/8” Drive 6 Point Standard Sockets: 1/4”; 5/16”; 3/8”; 7/16”; 1/2’; 9/16”; 5/8”; 11/16”; 3/4”; 13/16”; 7/8”; 15/16”; 1” • 3/8” Drive 6 Point Deep Sockets: 1/4”; 5/16”; 3/8”; 7/16”; 1/2’; 9/16”; 5/8”; 11/16”; 3/4”; 13/16”; 7/8” • 3/8” Drive 6 Point Metric Sockets: 6mm; 7mm; 8mm; 9mm; 10mm; 11mm; 12mm; 13mm; 14mm; 15mm; 16mm; 17mm; 18mm; 19mm • 3/8” Drive 6 Point Deep Metric Sockets: 6mm; 7mm; 8mm; 9mm; 10mm; 11mm; 12mm; 13mm; 14mm; 15mm; 16mm; 17mm; 18mm; 19mm • Universal Joint • Full Polish Stubby 84 Tooth Ratchet • Full Polish Teardrop 84 Tooth Ratchet • Standard Extensions: 3”; 6” • Blow Mold Case
-
1/4” Drive Set Contains• SPECIAL 1/4 in. Drive 120XP Ratchet with 3 degrees of arc, The Double-Stacked Pawl design delivers 120 Positions, exceeds ASME torque performance requirements and gives easy access to fasteners • Thumbwheel Ratchet, 2 & 6 in. Extension, and Universal Joint • Standard Sockets: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in., 4, 5, 5.5, 6, 7, 8, 9, 10, 11,12, 13, 14, 15 mm. • Deep Sockets: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 , 1/2, 9/16 in., 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 mm. • Blow Mold Case with Removable Lid
PLUS FREE2 GearWrench 120XP Ratchets • The Double-Stacked Pawl design delivers 120 Positions 3° arc - exceeds ASME torque performance requirements and gives easy access to fasteners • ONE STANDARD RATCHET AND ONE FLEX HEAD RATCHET - $140.00 VALUE
4 Pc Precision Mini Pick & Hook Set#MT6943 Full Hook, 45°, 90°, straight pick, Steel shafts, cushioned non sl ip gr ip, knurled shaft grip
11.955.95
5 Piece Puller and Scraper Set12.95
#AP18MS51 • 9 in. Cotter Pin Puller • 8 in. Scratch Awl • 7 in. Radiator Hose Remover • 11 in. Multi-Purpose Scraper • 8-1/2 in. Multi-Purpose Scraper
For engine rebuilds and mechanical maintenance, the Scraper and
of scrapers, picks and pullers.
22.95Individual Professional Screwdrivers
#Gi63080
PRY BAR SETS
HEX KEY SETS
#MT26623 1/4” x 4” 2.95
Part No. Drive
#MT26673 2” x 4” 3.95#MT27018 3” x 6” 2.95
Part No. DrivePrice Price
SLOTTED PHILLIPS
12.95
59.00
#PM9100GC • 4 Phillips 1, 2, 3, 4 & 3 Slotted 1/4, 5/16, 3/8 • Black tip prevents chrome shedding • Square shank allows the use of wrenches •
component handle: red for high impact and black anti-slip.
ALMOST INDESTRUCTIBLE
7 Pc Industrial Go Thru Shaft Striking Screwdriver Set
Phillips & Flat Tip
Square Shank
ProtoQuality
12 Pc Jumbo Punch & Chisel Set
8 Pc Professional Large HandleScrewdriver Set
• Drop forged, heat treated, chrome vanadium steel shafts with magnatized tips.
• Heavy duty, TPR handles provide a secure hold during use.
• Phillips sizes: #2 x 1 1/2”, #1 x 3”, #2 x 4”, #3 x 6”.
• Flat sizes: 1/4” x 1 1/2”, 3/16” x 3”, 1/4” x 4”, 5/16” x 6”.
9 Pc Mechanics Screwdriver Set#Gi63090 • Drop forged, heat treated, chrome vanadium steel blades with non-slip rubber grip handles • Satin finished shafts resist rust and corrosion • Magnatized tips allow for one handed use • Heavy duty plastic storage rack can be hung or stored in tool boxes.Includes: 4 pc phillips screwdrivers (#0 x 3”, #1 x 3”, #2 x 6”, #3 x 6”), 5 pc flat screwdrivers (1/8 x 3”, 5/32 x 3”, 3/16 x 6”, 1/4 x 6”, 5/16 x 8”).
Automatically locks in anyposition as it is extended
Dial Indicator & Magnetic Base Holder#CO777-75B (5) • Indicator 1” travel • 0-100 reading • Graduation .001
Electronic Stainless Digital Calipers
#CE3C301 • Resolution .0001 x .01mm • Inch meter reading • Floating Zero •
36.95 34.50#AIC5 (2) 2” x 60 yards, Water proof, Weather resistant.
Industrial QualityDuct Tape
PER ROLL 7.85
• 12 Red & 12 Black Knives • Impact resistant ABS housing • Tempered
blades for a new cutting edge • Fully retractable blade locks in any position
#MT6912 ... 24 Pack 23.76
10 roll sleeve3/4” x 60’ UL
Electric Tape
10 Rolls#M801 (3)
50 Rolls 10 Per Pack#M801 (3)
8.959.95
MISCELLANEOUSHAND TOOLS
#MT7561 Metric Set ................................................ [18] 129.95
25 Feet1” wide blade #LSKTS125N 8.95
ONLY$0.99 EACH
Heavy DutyRetractableUtility Knife
#MT82578Package of 50 Spare Blades 5.75
(6 or more 4.50)#MT69103 ...................4.95
• Retractable blade locks in three cutting positions.• Stout body offers extra strength for cutting thicker materials.• Soft rubber surfaces provide secure non-slip grip.
Stores UpTo EightUniversalBlades
MHA
eavy Dutyable
Stores UTo EigUniveBla
AngleCube 2 in 1Digital Angle Gaugeand Bevel Gauge
Accurate and reliable measurement of vertical angles. Just zero on the saw table, set AngleCube on blade and crank it over to the desired angle.
• 3-Side Magnets, 4-Side Measuring• Digital Level & Bevel Gauge 2-in-1• Heavy duty aluminum alloy body• Tracing absolute level• Measuring relative bevel• Strong magnets, bottom and 2 sides• Large clear LCD display• Reversible reading• 2.17” L x 2.17” H x 1.2” W
#IGA352226 29.95
CLOSE OUT!
#MT87230RP (2)• Durable housing• Fold a way wind up handle
Dual inch and centimeter scale
100 ft Tape Measure
6.95
AIR TOOLS
1/4” Air Die Grinder20,000 RPMS, 1/2 HP motor
1/4” Air Die Grinder
Milwaukee Pneumatic
22,000 RPMS, Rear exhaust, Limited Quantity!
1/4” Air Die Grinder1/3 HP Motor, 22,000 RPMS
Chicago Pneumatic
1/4” Air Die GrinderComfort grip, Built-in speed regulator, Rear exhaust, 5-1/2” long, 22,000 RPMS
Sioux
Rear exhaust, 24,000 RPMS , Full 1/2 H.P.
Super Heavy Duty!
1/4” Air Die Grinder
Florida Pneumatic
High free speed: 22,000 rpm, Low noise level: only 81 dB(A), Variable top speed regulator, Composite overmould grip, Rear exhaust, Includes 1/4” and 6mm collets, Easy accessibility
• SA-5: Cylindrical shape 1/2” X 1” • SA-3: Cylindrical shape 3/8” X 3/4” • SC-3: Cylindrical radius end 3/8” X 3/4” • SC-1: Cylindrical radius end 1/4” X 5/8” • SD-1: Ball shape 1/4” • SD-3: Ball shape 3/8” • SF-3: Tree shaped radius end 3/8” X 3/4” • SF-5: Tree shaped radius end 1/2” X 1”
Full Size 13” long, Extended shaft for hard to reach ,.P.H 24. ,gniraeb llab llA ,tsuahxe raeR ,secalp
20,000 RPMS
13” Extended Shaft Air Die Grinder
#MP217 (4) .................... 109.95
#MP2181 ..............................59.95
8 Piece Double Cut Carbide Rotary Burr Set 1/4” Shank
2 YEAR WARRANTY!
• 40% MORE POWER- 80 FT LBS TORQUE
• 4 TIMES THE SPEED OF A NORMAL RATCHET – 600 RPM Gets the job done that much faster
• HAMMERS LIKE A IMPACT WRENCH - (Reactionless) No more busted knuckles in
tight places
• QUIETER WITH 79dba -
1/4” Angle AirDie Grinder
• 18,000 RPMS• 1 Full H.P. Non Stall Motor• Low Vibration• Composite Housing• Rear Exhaust• Precision Bevel Gears
QUIET, POWERFULAND DURABLE
#AC6265 169.95(3)
1/2” IMPACTS
3/8” IMPACTS
1/2” Super Duty Air Impact#IR244A (7) 1300 blows per minute, 7000 RPMS, 500 ft. lbs Torque
1/2” Super Duty Air Impact #CP749 (8) 625 lbs torque
Chicago Pneumatic
1/2” Air Impact
#CP7620G Handle exhaust, Air inlet swivels 360°, 425 ft. lbs, Double teasing trigger, one hand F/R plus comfortable curved handles.
Chicago Pneumatic
229.00 269.95
149.95
1/2” High Torque Air Impact#IR231C (8) 600 ft. lbs. Reverse Torque, 425 ft. lbs. Forward Torque
159.00
1/2” Heavy DutyAir Impact
#CP7736 • 670 Ft lbs Torque • Twin Hammer mechanism • Steel nose housing.
Chicago Pneumatic
169.95
1/2” AIR IMPACTS
High Torque & Great Durability
3/8ths Heavy Duty Palm Grip Air Impact 70 ft. lbs TorqueMilwaukee
Pneumatic
70 ft. lbs Torque , Air inlet swivels 360°
3/8ths Palm Grip Air Impact
Chicago Pneumatic
#MP136E (4) .............. 69.95
#CP7722 (4) ........... 158.00
3/8” COMPOSITES3/8” PALM GRIP IMPACTS
1/2” Composite Air Impact#AC1000TH 1000 ft. lbs. Torque, 200-800 Working Torque
198.00
#AC1200-K A no non-sense, hard hitting 1/2” Impact wrench that out performs anything in it’s class. The 1200-K is light weight, powerful and with it’s Kevlar Com-posite housing extremely durable.. Used by many NHRA Top Fuel Race Teams. • Most powerful 1/2” Impact on the market today • 2 Year Warranty parts and labor • 1200 ft lbs. loosening torque • 250-900 lbs working torque • Only 4.5 lbs.
1/2” Kevlar Composite Impact Air Wrench With Twin Clutch 259.95
1/2” COMPOSITE AIR IMPACTS
Chicago Pneumatic
#CP7749 • Only 3.95 lbs • One hand side to side F/R • New 2 Stage Trigger for more control • Twin Hammer mechanism • Curved handle w/ Rubber Grip • The Best 1/2” Impact on the Market
1350 ft. lbs. ofNUT BUSTING
TORQUE!
1/2” Super Duty Air Impact
279.00
Composite 1/2” Air Impact
Chicago Pneumatic
1200 ft lbs nut busting toqure • Only 4.4 lbs. • Full Tease Trigger • Magnesium clutch housing
EXTREME DURABILITY!
3/8ths High TorqueHandle Exhaust, 180 ft. lbs. torque.
#IR212 (7) ....................... 189.00
3/8” Composite Air ImpactNew “Super Clutch” Twin HammerPowerful, Small, Quiet Technology. 500 ft. lbs. Loosening Torque
WEIGH’SONLY 2.6 lbs.
#AC1300THA ............................ 179.00
Chicago Pneumatic
NEW
3/8ths High TorqueHandle exhaust, 360° swivel eliminates twisted or kinked hose, Tease throttle, 4 power settings, Retail $243.00, 200 ft. lbs. torque.
80 ft. lbs Torque, Swivel Inlet,3 Position Power Regulator,1.1 lbs and 5.4” long fits in palm.
#AC1320807 (4)
319.00
1/2” Titanium Air Impact#IR2235TiMAXPR • 930 Ft Lbs Max Reverse Torque • 870 Ft Lbs Max Forwasrd • Only 4.6 Lbs 8500 Rpm • Titanium Hammercase, Steel Wear Plate and Composite Housing
NEWNext GenTitanium
INCLUDESFREE SUPER DUTY
AIR HAMMER #IR121Q$175.00 VALUE
*Limited quant i ty avai lable.Whi le suppl ies last .
1350 ft. lbs. of NUT BUSTING TORQUE!
Air Impact Compact 1/2“
1600 impacts/min, 500 ft lbs. torque.Patented Quiet Technology built in, Jumbo mechanism for durability,
99.95#AC1055THKP
INCLUDESFREE KNIFESEE COVERFOR DETAIL
New & Improved 3/4” Composite Air Impact
1350 ft. lbs. Maximum
Reverse Torque
Steel hammer case for durability, Feather touch trigger, Patented Quiet Technology, One hand forward / reverse,
than its predecessor, Forward torque range 200 to 900 ft lbs
Only 7.4 lbs.
Chicago Pneumatic
• 1440 ft lbs Torque • Full Teasing Trigger • 3 power settings • Easy Side to Site Single handed Forward / Reverse • Magnesium clutch housing • Twin hammer mechanism for durability.
IR261 (18) A 3/4” gun with the power of a 1” gun, Retail $783.001100 ft. lbs. Torque
AC1680 (12) 1600 ft lbs torque, Only 12.58 lbs., Ergonomically designed handle, Patented quiet tuned exhaust, Industrial grade Aluminum Impact Wrench, 82-86 dBA far below the OHSA guidelines, 1 Year warranty
CP772H (12) Handle exhaust, 4 position power regulator, 360 degrees swivel inlet, Retail $629.00, 1000 ft. lbs. Torque.
398.00 398.00 498.00
Chicago Pneumatic
3/4” Air Impact
Super Duty 3/4” Aluminum Twin Hammer Air Impact Super Duty
3/4” Air Impact
1000 ft. lbs.Torque
3/4” AIR IMPACTS LONG SHANK 3/4” GUNS
#IR2616 (19) torque • 6” shank allows user to easily reach lug nuts in truck wheels
Super Duty 3/4” Impact with 6” Shank
Super Duty 3/4” Aluminum Twin Hammer Impact with 6” Shank1400 ft lbs torque, Only 12.58 lbs., Ergonomically designed handle, Patented quiet tuned exhaust, Industrial grade Aluminum Impact Wrench, 82-86 dBA far below the OHSA guidelines, 1 Year warranty
#CP7769-6 6” Shank ...............................(10) 598.00#CP7779-6 With a 1” Anvil ....................(10) 598.00
50 ft. 1/2” Diameter Hose
011028 (14) For 3/4” Impacts
3/8 Fittings, 1/2” I.D.
1010 (14) For 1” Impacts
1/2 Fittings, 1/2” I.D.
69.95Shop Air Tool Oiler#SS16600 Unique self centering , non drip oil dispenser head, Can easily be adjusted for right or left handed or center mounting positions on a toolbox or wall, 8 oz translucent shatter resistant oil reservoir, Adjustable knob on dispenser head
49.95
Your Choice
2 YEAR
Built Quiet Technology only 89 dba., 1400 ft. lbs. ultimate torque, ergonomic grip, 1600 ft lbsloosening torque, “Super Duty”
• 2300 ft lbs torque • 8” Anvil • low wear pin-less hammer for ultimate reliability and added hitting power • 33.5 lbs
1” High Torque Air Impact - 8” Anvil
2300 ft lbs torque
ONLY 15.5 lbs.
3 position regulator in forward, Full power in reverse, Designed for waist usage eliminating, back, arm and wrist strain, 1600 ft. lbs. Torque
1” H.D. Air Impact with FREE 5 Pc Impact Kit2140 lbs. Maximum Torque• Full teasing throttle• Reinforced clutch mechanism• Low Vibration• Extreme durability
Low Weight 1” Air Impact
549.00 #AC1891
Chicago Pneumatic
1” Air ImpactRetail $929.95, 1770 ft. lbs. Torque, Tune Up Kit $89.95, New Rubber Guards
Each of these sockets has 3/4” square drive opening, permit-ing the use of an extension and torque wrench to tighten the locknut as required • Sockets are made of high-strength steel
if tool is subjected to impact wrench use
* Fits special rounded Hex Nuts as found on Dana Axles of some Ford Trucks
Truck Wheel Bearing Locknuts
(Metric Available)
6 Point SocketsPART NO. OPENING PRICE PART NO. OPENING PRICE
#MT4966 3/8th Set ...... 8.75#MT4971 1/2” Set ......12.75
#SX2301 1/2” Female x 3/8” Male 1lb ........8.95#SX2302 1/2” Female x 3/4” Male 1lb ..... 12.95#SX4301 3/4” Female x 1/2” Male 1lb ..... 19.95#SX5303 1” Female x 3/4” Male 3lb. ....... 29.95#SX4300 3/4” Female x 1” Male 3lb. ....... 24.95
#CP7901 (2) -tion, adjustable guide for depth of cut • For body, exhaust, and muf-
sheet metal up to 16 ga.
Super Duty Reciprocating Saw
136.00#MP10SAW10 Saw Blades 14.95
Chicago Pneumatic
179.00
RECIPROCATING SAWS
MPS17A (4) Fully adjustable pattern control, Maximum trig-ger control, Fluid & air delivery are fully controllable.
Spray Gun
SPRAY GUNS
79.95
#SX227B (5) Cuts up to 18 gauage mild -
eration, Planetary cage gearing for heavy duty use.
18 Gauge Air Shear
BLADES#SXRS227B17 LEFT 18.95#SXRS227B20 RIGHT 18.95#SXRS227B19 CENTER 21.95
119.95Ingersoll-Rand
Model#IR7802SA189.95
98.00#AC6330 Cuts 18 gauge steel, Powerful 1/2 HP. Motor, Cuts a minimum Radius of 3/16”, Rear exhaust, 2 year war-ranty.
18 Gauge Nibbler
DeVilbiss® Paint & Touch-Up System includes a full-size HVLP spray gun and mini detail spray Mini Spray Gun for detail work • 3 Tips, 2 Cups, Regulator and Tool Kit • Take on any big automotive painting job with this 2-gun DeVilbiss® Kit that includes a large HVLP Gun for top coats, primers and sprayable
130cc), gun-mounted air regulator, and cleaning and adjustment tools. One-year mfr’s. warranty.
159.00 #DV802342
DeVilbiss StartingLine HVLP Gravity Spray Gun Kit
7575
3” - 6” - 8”
AIR TOOLS3/8” AIR DRILLS
119.95
Industrial 3/8” Reversible Air DrillCP9790 (4) Industrial Quality
Free speed 1800, Length: 10-1/8”-1/4” hex drive, Adjustable Clutch, Reversible, 45 to 115 in. lbs. Torque.
Industrial Air Screwdriver1/4” Hex drive, RPM 1800, Adjustable Clutch, Reversible, 20 To 115 in. lbs. torque
#MP810TA (5)
AIR SCREWDRIVERS
Milwaukee Pneumatic Milwaukee Pneumatic
98.00 #MP800TA (5) 98.00 189.00
#AC6275A The Aircat pneumatic corner die grinder is designed to cut bolts, trim welds, cut exhaust pipes and more. Compact for use in restricted spaces.INCLUDES: Handle exhaust • 15,000 rpm • 15.5” long • 4 lbs This diverse tool can be used for both a
as an angle die grinder for light to medium grinding tasks. This tool is a unique grinder that will increase
llarevo ;”4/1 :telni ria ;”4 :ezis csiD .tekram eht no epytlength: 17”; air pressure: 90 PSI; weight: 2.4 lbs.
Wheels Available...INQUIRE!
4” Extended
3/8” ReversibleCompositeAir DrillAC4439 (4) . 7 HP Extreme Duty Drill,Forward handle for control and increasedfeed force, 2200 RPM STALL FREE motor,silencing technology & reduced vibration.
extremeDUTY
AIR TOOLS
Heavy Duty Air Chisel• The most controllable CP ZipGun available • Positive action trigger • USA MADE
2000 BPM
Super Heavy Duty Hammer.498 Shank
1800 BPM
Chicago Pneumatic
Chicago Pneumatic
#CP714 (5)
#CP717 (12)
Air Chisel Springs
Ajax Beehive Springs.401 Shank Type .498 Shank Type
• Make fast work of body panel crimping and cutting, bushing, driving, shearing and general front end work with this air ham-mer • A super duty tool that produces up to 3,000 blows per minute • Professional touch trigger for total control.
Super Duty Air Hammer
#IR121Q (5)
Heavy Duty Air Chisel
Chicago Pneumatic
#CP7150 (#CP715)
– 3-1/2 Stroke– Longer stroke means more power
2100 BPM
129.00
399.00
598.00
7.75
29.95
14.95
4.75
5.95
AIR CHISELS ACCESSORIES
79.95
#CPCA155807 Set Includes: Riv-et cutter, twin blade cutter, cold chisel, straight punch, tapered punch, and spot weld splitter
Chicago Pneumatic
.498 SHANK HAMMERS
AIR CHISELS / AIR HAMMERS
#CP7120 (8) 4600 Blows Per Minute
Air Needle Scaler #SX247 (8) ,erob 1 ,ekorts 8/1-1 4600 Blows Per Minute,
Industrial Air Needle Scaler
Air Needle Scaler #IR125 For surface preperation work involving the cleaning or removal of paint, rust, dirt, or weld slag, 4600 Blows Per Minute.
Chicago Pneumatic
SUNEX
19 Pc Needle Set #834024 10.95
19 Pc Needle Set #834024 10.95
198.00
198.00
158.0019 Pc Needle Set #834024Retainer Clips #SXRS730222 5.95
#MP208 20,000 rpm, Direct Drive Motor, Positive Control and lock out throttle, Adjustable exhaust.
49.95
AstroPneumatic
3” Mini Saw Wheels#SGCA1701 6 Pack
#MEC613070 100 Wheels
Arbor for Cut
#SG94950 3/8” holes. Use to convert any die grinder or
have a safety guard and the operator should use safety goggles.
7.95 109.95
5.95On Sale,
Limited
Quantity!
#MP209 (3) Positive control and lock out throttle protection, Adjustable protection guard, Variable speed control, 15,000 rpm.
79.0098.0098 0000988
AstroPneumatic
Makes Straight Cuts Easier & More Accurate
Super Ultra Duty .498Shank Air Hammer• 1760 Beats Per Minute• Long 2-11/16” Piston Stroke
#AC5300-A (8) 398.00#AC5300-A-T 349.00without
chiselsPanel Cutter, Hammer,Punch & Rivet Cutter
Air Hammer#CP7111FLASH (5) 59.95
3500 BPM
INCLUDES FREERECHARGEABLELED FLASHLIGHT
70.00 VALUE
Chicago Pneumatic INCLUDES FREE
70.00 VALUE
ic
#SX1819T (11) Sets the following up to 1/4”, Conventional standard blind rivets, Structural blind rivets, Mono bolts, T-rivets, 3960 lbs of pulling power.
1/4” Heavy DutyMono Bolt Riveter
1/4” Air Riveter
FAR
RAC155 (6) Sizes 3/32”, 1/8”, 5/32”, 3/16” in all metals
RAC161CC (6) Sizes 3/32”, 1/8”, 5/32”, 3/16” 1/4” in all metals
#MPPR36 (9) ,”23/3 ,8/1 ,23/5 ,61/3 seceip esoNQuick release air valve, Performs well at any angle.
3/16” Heavy Duty Air Riveter
#MPPR14 (11) Nose pieces 1/4, 3/16, 5/32, 1/8, 3/32”, Quick release air valve, Performs well at any angle.
1/4” Super Duty Riveter#MP1426 (6) Extra long handle for leverage, 5 nosepieces -1/8, 5/32, 3/16, 7/32, & 1/4, Tool length 20-3/4.
HP-2 Professional Hand Riveter
#MR39000 This is the largest selling hand rivet tool in the industry. Known and trusted for durability, qual-ity, and performance, this tool is often copied but never equaled. The HP-2’s square shoulder fulcrum pin of cold-formed, heat-treated steel prevents pin rotation that can elongate the engaging holes and cause premature tool failure in imitation tools. Other quality features include: precision die-cast, high-strength aluminum alloy body; drop-forged carbon steel upper handle; and thick, custom-molded.
• Sets up to 3/16 inch steel rivets. • Four mounted nosepieces: 3/32, 1/8, 5/32, and 3/16 inch
AstroPneumatic
AIR & HAND RIVETERS
#20007 Spare Jaw Set 24.95
#50007A 3/16 Spare Jaw Set 24.95#50007 1/4 Spare Jaw Set 24.95
#SXRS819303 Spare Jaw Set 33.50
169.95
498.00
89.95
269.95
169.95
#MPPR36-04 Spare Jaw Set 14.95
#MPPR14-04 Spare Jaw Set 19.95
239.95
759.00
3/16 Jaw #HEPRG54046
NEW #HEPRG540
1/4 Jaw #HEPRG54044 29.9529.95
895.00
3/16 Jaw #HEPRG402-8A
NEW #HEPRG510APLUS
29.95379.00
29.95
29.95
#SX1819TVWith Vaccum Assist 598.00
Plastic Bottle Collects Spent Mandrels
was 295.00
7” Angle SanderMP245S 4500 RPMS, Only 6.5 lbs., 5/8 x 11 spindle, 14 1/2” long, 1 H.P., Automatic throttle release.
7” Angle Sander#CP7269S (869S) (10) 5000 RPMS, Rear Exhaust Built-in air regulator, 1 HP Motor, Retail $350.00.
7” Super Heavy Duty Angle Grinder#CP9123 (857) (8) 7500 RPMS, 1.12 HP motor, 1/2” Hose Required.
Chicago Pneumatic
Industrial 4” Air Angle GrinderSX211A (5) 11,000 RPMS
Adjustable Swivel Guard
168.00
459.00
199.00
Universal Industrial
4-1/2” Air Angle Grinder#UT87801 (5) • .9 H.P. Motor • 10,000
gnoL ”8 ylnO • eldnips 11 x 8/5 • smpr• Governor controlled to maintain speed under load, heavy duty spiral gears for reliability, ergonomic grip for comfort and reduced vibration
AIR ANGLE GRINDERS
7” Grinding Wheels#DC7020HT Spin on depressed center 5/8 x 11” thread, aluminum oxide max. 8.750 rpms • 1-1/2 lb.
4.95
MTABG (1) With saftey lever
Premium Air Tool Oil
1 Quart (32 oz.) #OL1 (3)
Seal Tape1261 (1) 1/2” x 520” •
tape • Used for sealing threaded connections on pipe “plumbing”.
Male Couplers MI716BK Box of 10 43.75Air Couplers MI715BK Box of 10 42.75Plugs MI727BK Box of 25 25.75Plugs - Female MI728BK Box of 25 25.75
10 Per Pack
MI777 Case hardened steel, plated to resist rust • Maximum inlet pressure: 300 PSI • Maximum temperature: 250º F.
Milton
MI775 Push type • Body engages automatically • Max inlet pressure 300psi
1/4” Female ARO A-Style Interchange Coupler
Milton
Mi1194 1/4” NPT, Can be used in steam applications if less than 120°, Resistant to heat, corrosion, water, salt water, and oil, Maximum working pressure should be limited to 75% of dial range
Pressure Gauge - 2 in Face
0-160 PSI
Prevents rust, dissolves gun and sludge
4 oz. #MV080R 3.4911.75
4.99
12.95
5.75
1.39
6.95 12.953.95
3.4912.95
1.959.95
1.19A Style Female Plug - 1/4”
Milton
#Mi778
AIR TOOL ACCESSORIES
each
Milton
Shop Air Tool Oiler#SS16600 Unique self centering , non drip oil dis-penser head, Can easily be adjusted for right or left handed or center mounting positions on a toolbox or wall, 8 oz translucent shatter resistant oil reservoir, Ad-
49.95
#CP854 (5) • 12,000 rpm • Powerful .6 HP high performance motor • Spiral bevel gearing for smooth operation and low vibration • 3/8 x 24
#VQ03842690 • One Cutting Attachment for All Fuel Gases (with proper tip) • G350 Series Regulators • 5 Year Warranty • Heavy duty heating and cutting torch kit • All-new WH411C torch handle provides a more ergonomic grip • Handle is made of a high-strength alloy that is more durable than a standard brass handle • Color-coded knobs reduce confusion when operating the torch • Built-in check valves for safety.
Victor Medalist G-350, 540/510, Heavy Duty, Cutting System, Medalist 350
MP8075SE dark in 1/25,000 sec. • Variable shade adjustment Din 9-13 • German lensUv11R protection up to din 16 • Operator can
• Window 98mm x 44mm • Uses high performance solar cells as power supply and has 2 built in 3V lithium batteries as power backup • Meets ANSI standards • One year warranty
Industrial Welding Gloves13-1/2 Leather
FREE!119.95
199.95
AstroPneumatic
Oxyacety-lene Weld-
319.00
#MP8080 UL and UR approved pressure gauge. Comes Complete with: Torch Handle, Cutting Attachment, Check Valve, Oxygen Regulator, Acetylene Regulator, Nozzle Tips (VM-W 0, 2, 4 • VM-C 0-3-101), 15’ Twin Hose, Sparklighter, Goggles, Tip Cleaners.
AIR HOSE & REELS
50 Ft Industrial Red Air Hose• 300PSI • 4 Spiral • Oil restraint • 3/8” hose
Ozone Proof.
50 ft. 1/2” Diameter
Hose
3 Ft. Whip Hose With Swivel
011028 (14) For 3/4” Impacts
3/8 Fittings, 1/2” I.D.
1010 (14) For 1” Impacts
1/2 Fittings, 1/2” I.D.
RED50 (11) 50ft. 8 lbs.
48.50
69.50
15.75MT46347 3 foot Air Whip Hose With Swivel End • 250 psi
69.50
#MT4685 (11)or workbench keeps your air hose highly accessible and neatly stored. Use with 3/8 in. ID air hose. Precision-machined
brake stops and holds reel at desired position.
39.95Hand Crank Hose Reel (50 Ft Capacity)
100 ft Capacity Reel #MT4687 47.75
#AN201386VG (8)
#GY50A (7)
3/8” X 50 Ft Pliovic Flexible Air Hose
-tures, Oil, gas, and water resistant, 300 psi working pressure with 4:1 safety, Hose guards included but not shown.39.95
3/8” X 50 ft. Air Hose
USA Made, 250 psi working pressure.
25 ft. Hose#AN201385VG (5)
21.95 39.95
3/8” X 50 ft#MT46875 (47)
50 Ft Industrial Dual Arm Auto Rewind Air Hose ReelsUSA Made Air Hose, 250 PSI Working Pressure, Stays Flexible at -40° F and takes heat up to 190° F.
1/2“ X 50 ft#MT46878 (53)
189.95 219.95
3/8” X 50 ft#MT46845 (45)
50 ft Heavy Duty Auto Rewind Air Hose Reels
-40 F and takes heat up to 190 F
1/2” X 50 ft#MT46848 (52)
129.95 159.95
MP2618 Remove water, oil and containments , Easy reus-
Drain valve designed to empty -
lar setup for future upgrades with other STAR air filtration systems, Air inlet/outlet 1/2” NPT, Regulator capacity 50 CFM, Filter capacity 120 CFM.
Air Filtration System120 cfm Filter & Regulator in One
Service Gauage - 10 to 160 lbs.MIS-976 Easy to read Nylon Indicator Bar, Calibrated two sides from 10 to 160 lbs in 2 lb units and two sides from 80 to 1100 kilo pascals in 20 kPa units...red marker, Meets OSHA requirements.
Compact Safety Lever Blo-gunMIS-148 Safety nozzle, and a non-safety rub-ber tip nozzle. • Safety tip SCFM 11.7@100 psi • Non-safety tip SCFM 12.9@100 psi
MIS506 (2) Magnifying lens allows full view of scale 10 to 120 lbs.
20V 1/2” Cordless Li-Ion Drill Kit#DWDCD771C2 (12) Smaller and lighter but just as powerful, 1/2 ratcheting chuck, 2 speeds: 0-450 / 0-1500, Two Li-Ion Batteries, 1 hour charger, LED Light, Contractors Carry Bag, Three year Limited Warranty.
XRP18 Volt 1/2” Cordless Impact
359.00
FREE YOURSELF FROM AIR HOSE & ELECTRIC CORDS AND
GO ANYWHERE
1/2” High Torque Impact Tool - 20V Li-Ion
• Same Power as IR2135TiMax air Impact • Only 6.8 lbs • 20V Lithium Ion Battery w/ fuel gauge built in • 1 yr hassle free replacement • 2 year battery replacement • 3 year tool and charger limited warranty
One BatteryIRW7150-K1 (18)
398.00Two BatteryIRW7150-K2 (18)
498.00
3/8” 20V Cordless Impact Kit150 ft lbs torque
1/2” 20V Cordless Impact Kit
780 FT LBS TORQUE • 1100 FT LBS NUT BUSTING TORQUE
298.00
#CP8828K • Only 4 lbs • Two -20VXP Lithium Ion 4 Ah batteries with charge gauge • Twice the run time of standard lith-ion batteries • Full teasing trigger with safety lock • LED lighting • Rubber battery dampeners absorb shock • 5 year warranty on the tool and 3 year on the battery - longest in the industry
#CP8848K • Only 6.9 lbs • Two- 20VXP Lithium Ion 4Ah batteries with rubber dampeners • Twice the run time of standard lith-ion batteries • Full teasing trigger w/ safety lock position • Charger with gauge & Case • 5 year warranty on the tool and 3 year on the battery - longest in the industry • 4 composite bumpers
449.00
3/8” Impact Kit with 20V Li-Ion Batteries
395.00 #IRW5130-K2 3/8”
• 180 ft lbs torque • Only 6.5” from tip to tail • 2 Batteries
3/8” Ratchet Kit with 2 - 20V Li-Ion Batteries
395.00 #IRR3130-K2 3/8”
• 54 ft lbs torque • Variable speed trigger • 4.4 lbs and 17.5” long
Chicago Pneumatic
#DW059K2 (16) • Includes 2 batteries • 1 Hour Charger • Heavy duty box
loot wen raey 1 a seirraC •warranty • 300 FT LBS TORQUE
$30.00SAVINGS
LIMITED QTY AT THIS PRICE!
2BATTERIES 2
BATTERIES
12 VOLT SUB-COMPACT CORDLESS TOOLS
#DWDCF815S2 • Only 2.3 lbs • 3 LED lights • 3/8 to1/4” hex chuck one hand loading accepts 1” bit tips • Belt Hook • 0-2450 rpm • Only 6-1/2” long
1/4” Hex Impact Driver Kit
ONLY 2.3 LBS. 139.95
#DWDCF813S2 • Only 2.3 lbs • 3 LED lights • 3/8” hog ring anvil • 1150 in lbs torque • 0-2450 rpm • Only 6-1/2” long
3/8” Sub Compact Impact
139.95EACH TOOL INCLUDES:– 2- Lithium Ion Batteries– Charger– Carrying case
3 Year Limited Warranty and 1 Year Free Service Contract
CORDLESS IMPACT TOOLS
5-7/8”
9-1/2”
STANDARDMODEL
NEW SUBCOMPACT
SIDE BY SIDE COMPARISON
775 ft lbs torque... As much power as an Air Impact
Chicago Pneumatic
CORDLESS DRILL ACCESSORIES
Master Chuck KeySX8737 Fits 97% of all standard electric, air and coordless drill chucks, domestic and imported • 1/4” and 3/8” and most 1/2” chuck • Square center open aceth-ylene tanks • Compare at $29.99
14 Pc Power Nut Driver Set SAE & MetricMT2928 (2) and screwguns • 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 5, 5.5, 6, 7, 8, 10, 12mm • With
12 Volt Extended Run Time
14.4 Volt Extended Run Time
18 Volt Extended Run Time
DeWalt XRP Batteries
NEW!Longer Lasting
1 Hour Charger
JACOBS Keyless Chuck
3/8” & 1/2” Chucks & Key
MT2902 Turn any power drill into a not runner • 1/4 shaft • 3 sizes - 1/4, 3/8, 1/2 • Length 2-3/4”
3 Pc. Power Extension Bar
DWDC9310 (2) 7.2 - 18 Volt • Charges all DeWALT 7.2, 9.6, 12, 14.4, 18 volt batteries • LED Diagnostics to communicate status.
#MP5103435 3/8” #MP5304445 1/2”
#IR510MP 3/8” #IR509MP 1/2”
#DWDC9071
#DWDC9091
#DWDC9096
25.95 29.95
9.95 6.95 6.95 13.95 19.95
79.95
79.9589.9589.95
20 VoltLithium Ion Battery
Chicago Pneumatic
169.00
#CP20XP • 4 Ah- the strongest lith-ion on the market with twice the run time • 4 LED lights serve as a visual indicator • Bumpers make it resistant to shock and impact damage.
#DWDCB204 • XR provide 33% more capacity • 3 LED fuel gauge system 129.95
3/4 HP Heavy Duty 8” Bench GrinderDW758 3/4 “ H.P Induction Motor • 3600 rpm • 4.2 amps • 12 1/2“ between wheels • Spindle 5/8” • 36 & 60 grit wheels
3 Year Limited Warranty and 1 Year Free Service Contract
149.95#M1220HS • Settings 750 and 1000 F • 1200 watts/4100 BTUs • Hanging Hook
Industrial Heat Gun79.95 34.95
#M750 • Variable temperature dial from 750 to 1000 F • Industrial die cast metal housing • 1680 Watt gun produces 5700 BTU’s • 14 amps • 2 year warranty
Dual Temperature Heat Gun
59.95#UA01411
8” Wire Brush
NEW Heavy Duty 4-1/2” Angle Grinder
7” Electric Sander/Polisher
DWE4517 (19) 15 Amp motor • 4 H.P. • 7” Guard included • 8,500 RPMS
and wire brushes
7” Electric Grinder4 H.P. 8500 rpm
109.95 198.00
249.00
269.002699009.002699
3 YEAR WARRANTY!
3 Year Limited War-ranty and 1 Year Free Service Contract
-ish quality • 3 position bale handle and a traditional side handle • Includes hook and loop backing pad
3 Year Limited Warranty and 1 Year Free Service Contract
#DWE402 (6) • 11 Amps • 1.8 H.P. • 11,000 rpm • Paddle Switch • DUST EJECTION SYS-TEM for longer life • One touch guard allows for 360 degree rotation with single action • AC/DC motor • Oversized Brushes for longer life • Only 12” long with 5/8 x 11 spindle
#MK9237CX2 (15) • Variable speed Trigger & Dial- 600 to 3000 rpm with preset maxi-mum speed dial • Electronic speed control maintains speed under load • Wrap around handle • 10 amp Only 7 lbs • Lock on but-ton for continuous speed • 6.5” Velcro back-ing plate accommodates 7” pads • Inlcudes Foam Polishing pad, Tool Bag, Hook and loop plate.
LIMITED QUANTITY
UPGRADE FROM THE POPULAR DWD28402
NEXT GENERATION11 Amp
ELECTRIC SANDERS, GRINDERS & POLISHERS
HEAT GUNS
4-1/2” Grinding Wheels
Wheels Type 1
7” Grinding Wheel
• Flexible resin, Fibre-aluminum oxide-coated • 7” x 7/8” X 25 per box • Must be used with backing pad • S.W. 5 lbs.
5” & 7” Resin Fiber Grinding Discs
#DC7020HT Spin on, De-pressed center, 5/8”x11” thread, aluminum oxide max., 8,750 RPMS, S.W. 1-1/2 lbs.
#1724527C Double reinforced for safety 1/16 x 7/8 hole
With spin on hub
4” Grinding Wheels
25 Per Box
16 GRIT AVAILABLE
DC4030T (4) 10 Wheels
#MEC302024C 5” - 24 Grit
#MEC302036C 5” - 36 Grit
#MEC304024C 7” - 24 Grit
#MEC304036C 7” - 36 Grit
DC4510T (5) 10 Wheels 13.95
4.95
19.95
1.98
15.9515.9523.9523.95
SANDER & GRINDER ACCESSORIES
Heavy Duty Reciprocating Saw KitDWE304 (14) Heavy Duty 10 AMP • Variable speed trigger • Keyless Blade clamp • 1-1/8” stroke • 0-2800 strokes per min •
SPECIAL FACTORY PRICE!
Industrial 14” Chop Saw DWD28715 (46) 3800 RPMS • Quick lock vise • Quick release fence • 15 AMP • Operates on AC/DC • 5.3 H.P. Motor
3 Year Limited Warranty and 1 Year Free Service Contract
1/2“ Heavy Duty DrillDW235GR (6) Variable speed, 1/2 Chuck, Factory Serviced like New, 0-850 RPMS.
1/2” Electric ImpactDW293 (14) AC/DC Forward/Reverse rocker switch • 7.5 AMPS • Soft grip and all bearing construction • Only 7 lbs.
NEW HIGH TORQUE
345 lb torque
98.00
219.00
198.00109.00
DeWALT 14” Wheels for bar stock #DW8002 5 Blades [9]DeWALT 14” Wheels#DW8001 5 Blades [12]
34.50
34.50
7.8 AMP
LIMITED QUANTITY!
ELECTRIC SAWS, GRINDERS & DRILLS
10 AMP
#DW8725 • Designed for fast,burr-free cutting, it boasts proprietary aluminum oxide grain combination for aggressive cutting action.
25 ft Cord - #CE12006 (5) ......................................49.9550 ft Cord - #CE12007 (8)
•
......................................69.9525 ft On A Reel (Not Pictured)- #CE12009 (6) .....98.00
3.95
9 LED Mini Flashlight#MT60192 Ultra Bright 9-LED Light Head, Rugged aluminum housing, Knurled handle for better grip, Compact pocket size, Uses 3 “AAA” Batteries (Included).
Trouble Lights
#CM0691 25 ft (3) #CM0692 50 ft (4)
• 16-3 Wire • 13 Amps • Powertap • Metal Cage • UL Approved • OSHA • Rated for up to a 75 watt bulb 2 power outlets • Dual hooks to hang by guard or handle
19.95 29.95
50 ft. 12/3 Industrial Cord Reelwith Tri-Tap
CM04820 (25) 15 amp circuit breaker • Illuminated tri-source with power indicator light • Quick detach mounting bracket (no tools) • Cord pulls out to desired length, locks and automatically retracts with a single pull • Large heavy duty circular stopper locks cord in place. Keeps it from fully retracting into the reel.
169.00
Coleman Cable
79.95
50 Ft Retractable Reel 120
#BYSL864worklight has two magnets built in…one at the balance point in the middle of the handle and the other at the tip for the light • 18/2 SVT cord • Dual position magnetic hook hangs vertically and horizontally
BAYCO
#BYSLR2166
• 35,000 hour LED life • Housing is impact and chemical resistant • NiMH battery pack • AC & DC charging adapters and magnetic
hook included • Top magnet is great for reaching into tight
areas to retrieve metal hardware • Floodlight: 60 LEDs • Softbeam Flashlight: 6 LEDs
BAYCO66 LED Dual FunctionRechargeable Worklight
Flashlight End
48.75
• •
• 14/3 - 15 amp • 125 Volt • 1875 Watts • 1/3 Lighter in weight • 2-1/2 times more abrasion resistance • High visibilty yellow cord and metal case
Trouble LightsColeman Cable
Polar Cords Flexiable to minus 67° F
#CM05657 14/3 Cord (3)
#CM05658 14/3 Cord (6)
24.95 43.9525 ft 50 ft
CLOSE OUT#MP12SLG • 2 brightness settings 100 lux 8 hrs or 200 lux for 4 hrs • High performance LED light delivers 240 Lumen of light output • Super slim only 1/2 thick and 1/4 lb • 50,000 hour life with 500 charging cycles.
59.95
Ultra Slim Rechargeable LED Inspection Light With Hook Assembly and High-Energy Adhesive Magne
-
-
#MT60197 • 2 Flashing Red LED Warning Lights Identify You While Running or Biking at Night • Light Head Pivots and Holds Position to Focus Light Right Where You Need It • Comfortable Elastic Headband Adjusts to
5” or 6” Pad DC Electric Palm Sander 3/16” Orbit3 SPEEDS4k, 7k & 10k
forSANDING
COMPOUNDINGAND POLISHING
• Flexible push button speed settings• Quiet at only 70 dBA & low vibration• No exhaust air, no air borne oil, no blowing dust• DC current renders the tool shock hazard free and safe• 20’ low voltage DC cables• Includes VELCRO sanding backing pad, 4ply 100% wool polishing bonnet and a 6” foam polishing and compounding pad
25 ft. (14/3) #CM02407 3.5 lbs. 18.75*50 ft. (12/3) #CM0258802 8 lbs. 44.75
Size Part No. SaleWeightWire
TROUBLE LIGHTS
Size Part No. SaleWeightWire
25 ft. (12/3) #CM01687 4 lbs. 34.7550 ft. (12/3) #CM01688 7 lbs. 54.75
#CTYK31491 (48) • 200 amp 12v engine start helps start stubborn motors • 40 amp high, 20 amp medium and 2 amp low 12v charge settings • 130 amp start and 40 amp high 6v charge setting • Low 2 amp setting is ideal for charging 12 volt
12V battery and alternator problems, indicates battery state of charge • Charges 6 & 12 volt maintenance free, conven-tional wet, deep cycle, AGM, and gel batteries used in cars, trucks, farm equipment, RV, boats and commercial applica-tions • Charges automotive batteries in 1 to 3 hours • Large, easy to read 3” Ammeter and Voltmeter help monitor charging progress and identify problem battery conditions • Two hour timer with hold position • Heavy duty insulated clamps grip securely on all batteries and safely store on clamp holders • Heavy duty semi pneumatic wheels and chrome handle • Six foot, 6 gauge copper output cables • 41 lbs shipping wt • 5
and 1 year on cables.
#CTYK31511 (62) • 225 amp 12 volt engine start helps start stubborn motors • 60 amp high, 40 amp medium 12 volt charge settings • 160 amp start and 60 amp high 6 volt charge setting • 30 amp medium 24 Volt • Charges 6, 12 & 24 volt maintenance free, conventional wet, deep cycle, AGM, and gel batteries used in cars, trucks, farm equipment, RV, boats and commercial applications • Charges automotive batteries in 1 to 3 hours • Large, easy to read 3” Ammeter and Voltmeter help monitor charging progress and identify problem battery conditions • Two hour timer with hold position • Heavy duty insulated clamps grip securely on all batteries and safely store on clamp holders • Heavy duty semi pneumatic wheels and chrome handle • Six foot, 6 gauge copper output cables • 55 lbs shipping wt • 5 year limited warranty on transformer & recti-
6/12/24 Volt Fleet Battery Charger Starter
395.00
249.95
6/12 Volt Battery Charger Starter Tester
Century
CHARGERS & TESTERS
Century
25 ft Booster Cable 800 Amp 1 Gage#FJ45255 (14)
79.95
BOOSTER CABLES
#KTI74524• Booster cables have a tangle-free design• Flexible to -40 degree Fahrenheit temperatures• Vinyl coated clamps help prevent rust and corrosion• For side and top battery post
39.00
20 Ft Heavy Duty 4 Gauge 400 Amp Clamps
49.95With 500 amp clamps#KTI74523
BOOSTER PACKS
3400 PEAK AMPS
3400 Peak Amp 12 / 24 Volt Jump Starter#SOJNC1224 (42) • 3400 Peak 12 Volt Amps • 1700 Peak 24 Volt Amps • Indicator Display: Voltage • Charger: 1 Amp Automatic • Battery status indicator gauge. • 46” Heavy-duty #2 cables • DC outlet to power 12 Volt accessories. • 1 year limited warranty
Jump-N-Carry®
1700 Peak Amp 12 Volt Jump Starter#SOJNC660 (25) • 1700 peak amps of starting power and weighs only 18 lbs • Cable: #4 Gauge Welding, 46” long • Built-In Charger • Indicator Display: Volt Gauge • DC outlet to power 12V accessories • 1 yr warranty
Jump-N-Carry®
LIMITED QUANTITIES!
169.95
499.00
Carbon Pile Load Tester500 Amp adjustable load carbon pile, great for simu-lating cranking loads, Tests 12 volt batteries rated as high as 1000 CCA or 160 amp hour, can also test alternators, regulators, and starters, large dual meters display voltage and load current, meters are color coded , includes temperature compensation chart.
500 AMPS
6 & 12 Volt Battery Tester• Heavy-duty copper-plated clamps • 100 amp load capacity • 0-16 volt range • Load safety switch prevents arcing • Heavy-duty, chrome-plated, ventilated steel case • Works on both 6V and 12V batteries • Ceramic insulators • Determines state of charge, cranking and charging volts • Determines good/bad status • Extra large display with zero adjust
#ES700 (5) #ES710 (13)
Electronic Specialties
39.95 98.75
TESTERS
Electronic Specialties
STANT
#ST12270 Now test higher pressure cooling systems and pressure caps found in Audi, BMW, Mercedes, Volkswagen, ect. up to 30 lbs. New head design incoporates a pressure release bar. Also three new cap testing ranges 18 pounds, 20 pounds and 30 pounds. Accurate color-coded gauge. Instruction manual, a spacer for
109.95
Cooling System & Cap Pressure Tester
NEW!
DeluxeAuto Darkening Welding HelmetMP8075SE in 1/25,000 sec. • Variable shade adjustment Din 9-13 • German lensUv11R protection up to din 16 • Operator can adjust time from
44mm • Uses high performance solar cells as power supply and has 2 built in 3V lithium batteries as power backup • Meets ANSI standards • One year warranty Industrial
#ESEST65 (2) Quick and easy surface temperature measurements. Just aim, poll the trigger and read the temperature on the display! Measures 6 inch diameter target from 4 feet away. • Built-in Laser Pointer • °F/°C Switchable Button • Backlit LCD Display • Catalytic converters, air conditioners, heaters, radiators, engine troubleshooting, coolant temperature etc.
Auto Ranging Digital Multimeter#ES480A (3) High precision autoranging DMM that can trouble shoot all types of electrical problems. Select Volts, Ohms or AMPS and the unit will automatically select the proper test range. Other capabilities: Frequency,
fuse protection, data hold, protective holster, beeper for continuity testing, relative change function, manual range select.
9 Volt Battery Included • One Year Warranty-58 to 1022 Degrees
• Continuous backlit LCD Display, easy to use • Easy and accurate measure-
non-contact method • Memory function saves maximum and minimum RPM readings • Use for measuring RPM on coil-on-plug and diesel engines, where conventional inductive tachometers can not be used • Other uses include generators, compressors, industrial engines and equipment, fang, gears and more.
Laser Photo TachometerElectronic Specialties
Electronic Specialties
Electronic Specialties
#ES332 New pro model Photo Tach with high intensity laser beam. Laser method allows for longer detection distance, up to 60 feet away, result-ing in superior performance over infrared models. Also features max/min memory and continuous backlit LCD display. Great tool for a variety of RPM applications.
79.95
79.99
49.50
Includes: • Latching USB Cable & 6- and 9-pin Deutsch Adapter • 3 CAN - J1939/CAN125/CAN250/CAN500/CAN1000 • Automatic bit rate detection for all standard CAN channels • Single Wire CAN • Fault Tolerant CAN • J1587/J1708 • J1850 • ISO 15765 (Diagnostic CAN) • ISO 14230 (KWP2000 over ISO9141) • J2534 • ALDL • ATEC 160 (160 baud)
NEXIQ USB-Link 2 with Bluetooth Module
#UNQ124032 | #UNQ124034 WIFI (4) CALL FOR PRICING
times more random access memory than the old USB-Link, and it sup-
with broad protocol support RP1210A, RP1210B, RP1210C and J2534 API support.
COMPRESSORS
Two Stage Horizontal Gas Compressors 11-1/2 to 13 H.P.
-
vibration • Oversized cast iron balanced belt wheel for continuous operation
Two Stage 5 to 15 H.P. Electric Compressors (Horizontal & Vertical)
• Features truck bed mounting • Type 30 units include electronic ignition, idle engine control • 30 Gallon ASME receiver • OSH approved • Fully enclosed belt guard • Weather resistant • Cast iron construction • 175 max operating pressure • Extended pump life • 100% duty cycle • Start up kit not included
CALL FOR PRICING...
Portable Truck Mount 14 H.P. Gas Compressor2,598.00
#IR2475F14G • Easy starting Kohler engine • Individually cast cylinders for easy service • Durable cast iron pump for 100% continuous duty applications • 30 gallon tank • 24CFM@175 PSI • Includes alternator for battery charging • Shipping wt 575 lbs • Start type-electric/recoil • Manual drain • Belt drive • Fuel capacity 1-1/2 gal • 44L x 22W x 46H
FREESTART UP KIT($170 VALUE)
FREE SHIPPING
#HV9621210 (30)
ShopVac
INCLUDES:
with brush • squeegee inserts • crevice tool • claw utility nozzle • elbow grip • adapter • high quality collection bag • Ultra Web Filter
• 12 gallon collection tank • 6.5 hp single stage motor • 20ft Power Cord
powders • All of the tool accessories ride in the on-board tool storage. Tools included are items such as a crevice tool, nozzle with squeegee and brush insert, and a claw nozzle. 20ft Power
powders.
159.95
12 Gallon 6.5 H.P. Wet/Dry Vacuum
TEST EQUIPMENT
#SG27000 • The best quality electrical circuit tester available for checking 6 and 12 volt systems • Has heavy duty battery clip • 5-Foot
retained in spring supported strain relief designed to withstand the most rugged use • Bulb is easily replaced.
#ACDARZ6055P (4) • Recording and playing back: Video recording with voice annotation, can reviewing images and video directly on device • 4.5mm/8mm Camera Head: Easy to inspect tough-to-reach areas • 4GB SD Memory and USB Output: Holds 42,800+ images or 100+ mins of video recording on the included 4GB SD card • USB Output: For transferring video and images to a PC • 3” Color LCD and 2.5X digital Zoom: 320 x 240HD display resolution; 11 settings to adjust image size • Illumination Control: 4 built-in LEDs on camera probe with 5 settings of brightness to illuminate viewed object • 110DEG Viewing Angle and 180DEG Flip: 2
waterproof camera head resisting damages from water • Includes: 4GB SD memory card, (CIC501) 4.5mm x 48” long camera head, (AB642A) 6V Battery cartridge, up to 5 hrs run time
Inspection Camera Kit 4.5mm
199.95
#UNQ124034INCLUDES WIFI
oil and reduces spillage during transport • Low
pump for fast evacuation of oil from drain into shop collection tank • Large metal screen pre-vents foreign objects falling into the drain • Steel handle and 360 degree front casters ease moving and positioning of drain under vehicle • Evacua-tion hose has metal spout to assist in evacuating oil from drain • Ship weight 48 lbs.
Truck Waste Oil Drain with FREE Pump
• Ideal for oil draining trucks where a pit or hoist is not available • Large 18
screen • Convenient rotary hand pump facilitates easy evacuation to large oil tanks • Long steel handle eases moving and positioning of drain • Ship Weight: 46 lbs. • Package dimensions: 45”x25”x8”
12 & 14 Volt Cordless Grease Gun Kits#LN1244 12 Volt (23) • Consistent
fast charge • Custom carrying case • Faster than manual methods • Three
2Batteries Included
249.00
37.75
299.00
119.95
14 Volt 2 Speeds#LN1444 (23)
285.00#LN1201
12 Volt Battery
79.95
#AF8878
• Cartridge 14-1/2 oz (Bulk 16 oz)
• All metal (Blue)• Full Stroke
Grease Gun, Lever Handle, 10,000 psi
#LN1147
18V Corldess Power Luber Grease Gun Kit with Two Batteries
#LN1844299.95
• The most advanced grease un in its class • LCD Display indicates grease dispensed, cartridge level, charge level • Two speed design - High Volume (9oz min) & high pressure (3-0 oz min) - 500 PSI • 36” hose with spring gurard • Comes with a heavy duty case , charger and (2) batteries
GREASE GUNS
• A direct bolt in replacement for the rotary pump on the 8878 waste oil drain • Operates on DC power from 12V battery • Easy to use
8’ power cord, 5 ft drain hose and galva
-nized sprout • 1 gallon per minute for waste petroleum only
DC Powered Oil Drain Pump
system “No Pump to wear out” • Shop air pressure automatically closes a diaphragm in the oil catch pan, forcing the • oil out the 3/4” drain hose • Factory set air regulator
Splash guard in the catch pan defuses oil as it streams in • Eight feet of drain hose which stores around the catch pan • Stands on end using minimal storage space • Drip guard in
when in the standing position • 9.5” high, 30” diameter, catch pan 20” diameter, catch pan depth 3”, Swivel wheels ( 3) 3”, regulator is
• Pump tube is 1.18” diameter and 29.13” long • Pump head #1213R is 3.15” diameter and 13” long • Pump head #1220R 2 1/2 “ diameter and 10.25” long • 1/4” x 6’ high pressure grease
Connects
Pneumatic Grease SystemsComplete system with all parts shown for
50:1 RatioGrease up to NLG1#2 #NS1220R
60:1 RatioGrease up to NLG1#2 #NS1213A
65:1 RatioGrease up to NLG1#3 #NS1213R
Air Operated Single Action 3:1 Oil Pump
For dispensing medium to high viscosity oil and antifreeze from both fixed and mobile instal-lations.
#NS1702R (21) Fits 55 Gallon
antifreeze, 3:1 ratio, Includes bung adapter, Delivery rate 3.7 gpm, Foot valve and screen included, Tube length 37”, Air
x 48” oil hose included, 1/4” x 48” air hose included, Foot valve included, Needle valve in-cluded, Quick couplers included, Maximum pressure 116 psi. Maximum viscosity 130 SAE, 1 1/2” diameter suction tube
449.00
579.00
639.00
699.00
695.00#EROC16A
U Joint Puller for U Joint
Replacement
The World’s greatest original U-Joint Puller! For use with up to a one-inch impact wrench. Provides the ultimate “brute strength” for disas-sembling drivelines. Fits Spicer drivelines 1610, 1710, 1760, 1810, 1880, Meritor (Rockwell) 16N, 17N, 18N, 1710, Spicer SPL 140, 170, 250 “Life Series”, and Meritor RPL 20, 25 “Permalube” Series. (Virtually all Class 7 and 8 Trucks and Machinery)
Features: • Eliminates dangerous jacking, hammering, and torching • Removes sealed u-joint cups in minutes • Does not damage the driveshaft, yokes, joints, or bearing cups • Patented
advantage for easy disassembly • One piece unit (with no assembly required). No bolts, no cables, and no adapters • Fits U-Joints with bearing cups 1.5” to 2.2” • Shipping Weight: 13 lbs • Tested and recommended by the Spicer Driveshaft Division of Dana Corporation
with six 2” rubber rollers • 38” long x 17-1/2” wide x 3-5/8” high • 7/8 Floor clearance
“Almost Indestructible”
LisleUSA Made
4” High
7/8” Floor Clearance
#SX8509 (16) • 12-1/2” diameter seat • Air cylinder for easy height adjustment • Cushioned black vinyl cover • Large steel reinforced 15-1/4” diameter 1” deep tool tray • Five 2 ½” casters • 300 lb capacity
Professional Shop Seat
49.9539.95
79.95
#SX8507 (16) • Cush-ioned vinyl seat with 2” high compression foam • Seat dimensions 8 x 14 • Includes 1” deep parts tray: 11.5” x 12.5” • Frame: 14” High x 17” Long • Capacity 300 lbs.
Padded Creeper Seat
CREEPERS & SEATS
#SX8514 (28) • Air cylinder for easier height adjustments • Heavy duty 3.5” chrome
tread for easy mobility • 17” x 1” deep tool tray • Low height- 18” • High height- 22” • 300 lb capacity • Seat width 16”
98.00
17” Tractor Seat
6 Caster Creeper with Adjustable Head Rest
• Cushioned Red Vinyl cover with adjustable head rest• Length 40” • 6 caster wheels 2.5”• List price $137.00
79.95 SX8505 (20)
OM91000 ( 26) • Transforms with no tools in seconds • 40” Steel frame construc-tion, Seat Size: 14” x 12-1/4” • Padded seat and headrest • 450 lbs. rated capacity • Six 3” polyurethane, oil resis-tant, full bearing casters for easy 40 x 18 x 7.5
89.95
OmegaBlack 40” Foldable Z Creeper
BIG TRUCK STEPS
#UNQ5800
• Tested to 400 pound capacity • Has spring loaded grips for stability • Can be used as a work stool with detachable seat
Standard Two Step Big Truck Tire StepFor tire sizes 10” to 11-1/2”
239.00#UNQ5500 (15)
The Big Truck Tire Step is the only tire step that allows you to safely step on the top of the tire. The Big Truck Tire Step provides
trailers, 1-1/2 ton, 2 ton, and most medium sized trucks. The Standard Two-Step tire step is approximately 18” from the ground
Step tire step folds into a space just over a cubic foot.
The Super Single Two-Step tire
sizes like 385 and 425. Comes with the Dayton and Dual Wheel Adapter. Like the other Big Truck Tire Steps, the Super Single Two-Step can fold for storage or be used as a stool. Tested to 400 pound capacity. Has spring loaded grips for stability
For Tire Sizes 11.5 to 20”
Super Single Two Step Big Truck Tire Step
398.00
LIMITEDQUANTITIES
#WHPG7031 (26)• 400 lb capacity• Ground clearance 2.875”• Height 7.875”• 45” x 25” x 5”• Extra wide tires resist sinking in soft surfaces.• Lifetime warranty 159.00
Red Rough Rider Bone Creeper- USA MadeGoes were other creepers cannot-
CLOSE OUT
TOOLSUNLIMITED
HAVING TROUBLEFINDING THE ITEM
YOU ARE LOOKING FOR?
www.toolsunlimited.com
ORTOLL FREE CALL
1.800.537.1993
DRILL BIT SETS
118° HIGH SPEED STEEL, BLACK JOBBER BITS
• Pricing on other sizes including numbered and lettered, titanium coated, colbolt, extra long, bright vs black, complete indexes, etc available on request.
Hydraulic Long RamsLow ht. 24-1/4”, high ht. 45”, 1 year
clevis (round base).
• (2) 4” Steel Rear 360 Degree Casters • (2) 6” Steel Front Wheels • Measures 30” (W) x 57” (L) x 65” (H) in collapsed position • 32” width outside left leg to outside right leg • 12 Ton Ram • Capacity: 97” (H) at 2000 lbs and 90” (H) at 6000 lbs • Frame made from .145” Thick High Grade Premium Steel • Boom extension made from .100” Thick High Grade Premium Steel • 3/8” Forged Steel Hook • 12” Forged Steel Chain • Front Legs extend 32” totaling 90” legs • Boom made from 6” x 3-1/2” Premium Steel • Easy Control Lever on 12 Ton ram
• Collapsible for easy storage
Small Spaces / Saves Room • Shipping Weight: 170 .lbs
Working Dimensions: 65” x 41” x 37”, Boom Range: Floor – 102”, 3” x 3” Square Tube Legs (.125” Thick Steel), 4000 LB closed boom capacity and (48” inches maximum height), 1000 lb extended boom capacity and (102” inches maximum height), 8 Ton Hydraulic Ram, 12” Forged Steel Chain and 5/16” Hook, Packaged in 2 boxes and normally shipped via UPS, Full 1 Year Warranty, Ships UPS.
2 Ton Collapsible Shop Crane
3 Ton (6000 LB) Shop Crane
#CFT3103DL (220) The extended boom reaches 87” high from
#AFLRC3B (31)
#AFLRC8B (42)
3 TON
8 TON
#CFT2103DL (125/45) Six Fully Rotating 3” Steel Caster Wheels Easily allow you to move this hoist in any direction for increased maneuvering, Folded Dimensions: 58” x 37” x 22” so you can Store it in the corner and save space
259.00 599.00
98.00129.00
American Forge & Foundry
CRANES
98.00
135° Split Point Blitz Bits29 Pieces
#ALBB74190DM (3)
Spiral Flute Extractor & Cobalt Drill Bit Set
39.95
#HN11119 (1)• Designed to remove broken studs, bolts, socket
embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor’s grip increases • Extractor size and recom-mended drill bit size are etched on each tool.
Includes:• Spiral Flute Screw Extractors in sizes: EX-1, EX-2, EX-3, EX-4, EX-5 • Drill Bits in sizes: 5/64”, 7/64”, 5/32”, 1/4”, 19/64” • Metal index case
• Cobalt HSS drills are intended for stainless and hardened alloy steels where heat and abrasion are factors in the cutting environment • High hot hard-ness of cobalt permits speeds 30% over regular high speed steel drills • 135° split point for fast penetration and accurate starting without center punch.
149.95#ALCO50190
COBALTM42 29 Pc High Speed Steel Drill Bit SetSize 1/16” to 1/2” by 1/64” ths
USA MADE 135° SPLIT
POINT
Screw on Top
Hand Side Clip
• High Speed Jobber Length
• Cuts Faster with 50% Less Pressure
• Lasts Longer
• Split Point for Self Centering (no walking or skipping)
Used with 4 or 10 ton hydraulic units, 1/2 ton capacity (T/C)
Hydraulic Body & Frame Repair Kit
Stinger Air Hydraulic Foot Pump
10,000 Psi
• Internal relief valve protects the hydraulic components regardless of hydraulic pressure. • Two-stage release mechanism gives fast or metered ram return while reducing hydraulic shock. • Pump, hold or release load with foot lever control. • Reservoir capacity is 105 cu. in. (98 cu. in. usable).
6 ft. (T)
•5/8’ Stroke • 1” to 2-1/4”
HYDRAULIC BODY & FRAME REPAIR EQUIPMENT
American Forge & Foundry
4 Ton kit with molded case#AFP814C .............................................(49) 219.0010 Ton kit with molded case#AFP815C ....................................... (40/48) 349.95
• 60,000 PSI main stress parts locking swivel base 360° swivel • Steel serrated jaw inserts and PPE jaws • Straight line design • Unbreakable spindle and not.
• Replaceable hardened Steel serrated jaws • Built in pipe jaws 2-1/2 and 3” Capacity • Maximum opening 5-1/4” and 6” • Throat Depth: 3-3/4” and 4” • Casting: 30,000 psi and 50,000 psi • Large Anvil surface • 360 degree swivel base with 2 locking handles • One year warranty
Heavy Duty Swivel Bench Vises
American Forge & Foundry
5”#AF3947 (53) 249.95198.00
VISES
6-1/2” Multi Purpose REVERSIBLE Combination Vise, Swivel Base
395.00
YST865Di (50) USA Made • 65,000 PSI Ductile Iron • Machined “T” Bar for Precision Fit • Expandable Versatile Vise by Reversing Front Jaw, Two (2) Options • Large Dual Anvils, (1) Upper, (1) Lower • Lower Anvil Converts to Product Support Shelf when Reversing Front Jaw • Replace-able Hardened Steel Top Jaws: Serrated and Reversible to Smooth • Replaceable Hardened Steel Serrated Pipe Jaws • 5 yr casting warranty
• 6.5” Utility Workshop Vise with Swivel Base BASH Special Edition • 4 lb BASH Sledge Hammer 12” handle 20412 • Wilton Shop Vises have heavy-duty castings with a 30,000 PSI ductile iron body built for rugged use and extended life. Each has the capability of handling pipe as well as mounting to the bench with 3 mounting posts providing more stability and secure hold • 180° swivel base with lockdown allows for quick and easy positioning • Powder coat paint resists scratches and provides a tough durable surface • Built-in pipe jaws handle various pipe sizes • Large anvil work surface • Opening Capacity Max (In.) 5-1/2 • Throat Depth (In.) 3-13/16 • Pipe Jaw Capacity (In.) 1/8 - 2-1/2 • Jaw Depth (In.) 1/2 • Jaw Height (In.) 1 • Serrated Jaw Inserts
169.95 #WC11128BH (42)
6.5” Utility Workshop ViseWith Swivel Base & Bash 4LB Hammer Special Edition
U Joint Puller for U Joint Replacement
The World’s greatest original U-Joint Puller! For use with up to a one-inch impact wrench. Provides the ultimate “brute strength” for disassembling drivelines. Fits Spicer drivelines 1610, 1710, 1760, 1810, 1880, Meritor (Rockwell) 16N, 17N, 18N, 1710, Spicer SPL 140, 170, 250 “Life Series”, and Meritor RPL 20, 25 “Permalube” Series. (Virtually all Class 7 and 8 Trucks and Machinery) Features: • Eliminates dangerous jacking, hammering, and torching • Removes sealed u-joint cups in minutes • Does not damage the driveshaft, yokes, joints, or bearing cups • Patented design
no assembly required). No bolts, no cables, and no adapters • Fits U-Joints with bearing cups 1.5” to 2.2” • Shipping Weight: 13 lbs • Tested and recommended by the Spicer Driveshaft Division of Dana Corporation
#TG10102 (12) 398.00
Cheetah Bead Seater5 gallon steel tank • Designed for commer-cial use on all tires ATV to 24.5 Truck tires. • 18” wide x 27” long x 11” high
#TSICH5 (28)#TSICH5AL Aluminum Model (28)
298.00249.00
FREE SHIPPINGon $1250.00
American Forge & Foundry
By combining American Forge & Foundry Items (See pages 25 through 30) Within the contiguous 48 United States
LIMITED AVAILABILITY
INCLUDESFREE 3/8”
50’ AIRHOSE REELOFFER ENDSJUNE 30, 2017
With FREE Gauge & Bed Crank a 210.00 VALUE
Height 66”, width 32”, width inside 24”, bed width (I.D.) 7”, stroke 6”, 1 year warranty.
2 Speed Pump & Ram and Floating Head 7“ stroke, overall height
73”, inside leg width 34”, guaranteed for one full year, includes work plate & punch,
• All steel construction• Weatherproof twin pawl brake• Industrial grey powder coating• Zinc plated hand chain• Fully enclosed gearing• Grade 80 alloy chain• Forged alloy steel hooks
Heavy Duty Chain Hoists
1 Year Warranty
Custom chain lengths are available for all units...INQUIRE!
OZ LIFTING EQUIPMENT
1 Year WarrantyCustom chain
lengths are available Custom chain lengths are available
Lever Hoists
Chain Hoists3/4 Ton........#OZHDE075-XLH5 ft Lift (15) 166.0010 ft Lift (18) 189.0015 ft Lift (21) 211.001-1/2 Ton..#OZHDE015-XLH5 ft Lift (25) 199.0010 ft Lift (30) 239.0015 ft Lift (35) 279.003 Ton............ #OZHDE030-XLH5 ft Lift (42) 289.0010 ft Lift (50) 359.0015 ft Lift (55) 398.00
1/2 Ton........#OZHDE005-10CH10 ft Lift (19) 149.00
1 Ton.............#OZHDE010-10CH10 ft Lift (25) 169.00
2 Ton.............#OZHDE020-10CH10 ft Lift (44) 229.00
Double Duty Com-A-LongsDUAL SOLID GEARS and PAWL • Automatic Notch-at-a-Time letdown Thumb control release • Spring loaded release lever for unwinding cable • One piece heavy frame construction • Steel ratchet handle with padded no slip grip
2 TonTwo 3/8 safety catch hooks, 12 ft of 3/16 diameter aircraft cable
4 TonThree 15/16 safety catch hooks, 12 ft of 1/2 diameter aircraft cable
#MT5542 (10) #MT5547 (14)
39.95 49.95
COME-A-LONGS
OZ MINI CHAIN & LEVER HOISTS
109.00 EA.
PRODUCT FEATURES:• High strength alloy load chain• Fully enclosed gear train• Chrome plated covers• Galvanized hand and load chain
NEW OZ Lifting MINI Lever HoistsThrow in your Toolbox and Carry them Anywhere 500 lb. capacity
OZ Lever Hoist Model:#OMLB025 Only 5 lbs.
79” Work Bench with Shelves
American Forge & Foundry
• L�79” W�25” Ht�34�1/2” 210 lbs shipping wt in wood crate • 10 Gauge steel top with 2” retaining wall (1750 lb capacity) • 12 Gauge shelves with 550 lb capacity.
599.00#AF990760
INCLUDES GAUGE
(NOT SHOWN)
#AF992 (239)• 10-gauge rolled edge steel work top with 2” retaining
wall on sides and back (1750 lb. load capacity)• Two key-lock steel drawers with full-extension, ball-bearing slides• One 12-gauge steel shelf with a 550 lb. load capacity• Ship wt. 236lbs., Length 59” x width 251/4” x height 341/2”Each has sturdy 10-gauge steel worktops that can handle the weight of even the heaviest parts and assemblies. Bolt-down feet for added safety. Thick wall rectangular tubular legs create the sturdiest bench on the market. Ships in wooden crate.
#AF994 (260)• Table top features 1/2” rim• Extra heavy-duty construction• Capacity 1,000lbs.• 47”W x 31-1/2”D x 39-3/4”H• Fluids drain through table top into a removable plastic container (included)• Comes with locking storage drawer on ball bearing slides• Multiple shelf locations give added versatility• Square tube leg design gives added strength and stability to table top• Large 4” heavy-duty swivel casters (2 locking)
American Forge & Foundry
595.00
Buy 2 and Get Free Freight within the Continental USA
Technicians Work Bench with Drawers
American Forge & Foundry
629.00
Heavy Duty Teardown TableBuy 2 and Get Free Freight within the Continental USA 2 or more,
#AF3700-55500 (150) Makes clutch and flywheel removal easy, 500 lb capacity, Includes two separate splined alignment shafts 1-3/4” dia. with 1” and .983 pilot, turns 360° and pivots side to side, Lifts from 13 to 39”, Optional adapters for : removal / installation of
-entials, brake drums and camelback springs.
“Clutch Hound” Jack
Truck Transmission JackProfessional 2 Stage Telescoping Transmission Jack#AF2195B (310) Designed for larger
bread trucks, beer trucks, ect. (not for semi- trucks), fully adjustable saddle - tilts forward 30 degrees, back 15 degrees, 12 degrees side tilt, foot pump, low height 33-1/2”, high height 72-1/2”, 1 year warranty
EXCEEDS FEDERAL SPECIFICATIONS
(Trucks Only)
2200 lb. CAPACITY
2000 lb. CAPACITY
Truck Transmission JackFor Diesels, Busses and Larger Trucks
#AF3180-3181 (392) Low height 8-1/2”, High height 34”, Length 43”, Width 26”, Saddle tilts 30° forward, 15° backward, 15° side to side, Handle rotates 360°, Safety chain and side tray for tools and parts included.
EXCEEDSFEDERAL SPECS
4400 lb. CAPACITY
979.00 495.00
890.00
695.00
595.00
1469.00
TRANSMISSION JACKS
FREE SHIPPINGAmerican Forge & Foundry
American Forge & Foundry American Forge
& Foundry
American Forge & Foundry
American Forge & Foundry
795.00 (Pair)
#AF3595A (58) Designed for installing, re-moving and transporting brake drums, Fits 15” to 16-1/2” brake drums, Rotating handle for easy lowering and raising of drum, Adjustable brackets secure both outboard and inboard mounting drums with disc wheel hubs to brake drum handler, Removable handle, 8” wheels, low lift 10-1/2” high lift 15-1/2”, length 63”, width 21”
Brake Drum Handler
Compare with unitscosting $400.00 299.95
BRAKE DRUM HANDLER
American Forge & Foundry 495.00
Brake Drum Caddy
#ERBDC1 • Made especially for to-day heavy duty brake drums • Quick and easy to use! Theheavier the drum, the tighter the steel band grips it. The
removal or installing on the axle • The adjustable chain is only needed for low-
USA Made
MINIMIZE YOUR EXPOSUREHow do you remove your brake drums? The Emerson Brake Drum Caddy will reduce back injuries and greatly
#AF3190B (300) • 2 stage manual hydraulic operation • Universal head tilts forward 42°, backward 46°, and side to side 12° • Saddle is fully adjustable without using any tools • Low ht 38”, High ht 73-1/2
American Forge & Foundry
1100 LB Telescopic Transmission Jack
FREEFueller/Eaton TransmissionAdapter#AF3181 (Promo good thru 6/30/17)
FREE3/4” 8 PcDeep Impact
20 Ton Wide Stance Truck Ramps#AF3420ASD (324) • 20 Ton capacity per pair • Long retractable handle • Wheels ease movement and stores easily out of the way • Comes with rubber non skid pad to prevent slippage • Suitable for large truck tires up to 16” maximum width • Frame = 47” L x 18.25” W x 9.25” H • Overall length = 51
American Forge & Foundry
(Promo good thru 4/30/17)
26 to 38mm
FREE SHIPPINGon $1250.00
American Forge & Foundry
By combining American Forge & Foundry Items (See pages 25 through 30 ) Within the contiguous 48 United StatesMetic Socket Set
10 Ton Garage Stand#AFGS3310A Low height 28”, high height 47”, 2” adjustments, saddle 3” x 5”, base 16” x 16”, pin type
heavy duty 2” diameter pipe, saddle with locating lugs position and center load.
#AF3315A (55) Lot height 55”, high height 85.5”, all steel construc-tion, adjustable screw makes load positioning easy, used for exhaust, suspension, and other under hoist work.
4000 lb. Under Hoist Tripod Stand
Jack Stands
Garage Stand
20 Ton Jack Stand
12 Ton#AF3312B (70) Low height 18-1/4”, high height 28”, base 11-5/8” x 13”, saddle size 1 - 3/4” x 5-1/2”, weight 82 lbs.
6 Ton#AF3306 (30) Low height 15-3/4”, high height 24-3/4”, base 10-1/2 x 11-3/4”, 35 lbs.
#AF3309A (3) Low height 18-1/2”, high height 30”, base 17” x 17”, pin type support column.
PER PAIR
PER PAIR
139.00
69.95
169.00 139.00
179.00
169.00Sunex Brand #SX1310 189.00
American Forge & Foundry
American Forge & Foundry
American Forge & Foundry
American Forge & Foundry
American Forge & Foundry
#AF3314 (42) Pin type post with 4 height adjustments, Lifts from 12 to 20”, Large 3 x 3-7/8 saddle, Stable 10 x 10 steel base, Carrying handle, Sold individually.
JACK STANDS
FLOOR JACKS
5 & 10 Floor JacksManual or Air/Hydraulic
1 year warranty, all equipped with fool pedal except 2-1/4 and 3 ton
FREE freight within the continental USA on following two Jacks
298.00
• Pinned steel saddle (1-1/8” stud) with rubber pad for added vehicle protection • Rear mounted 2-3/4” swivel casters for ease of maneuverability • Equipped with a double pump design to increase speed without compro-mising overall performance of the jack • Second volume pump assists in getting the saddle to load much quicker than most other single pump designs on the market today • One piece 50-1/4” padded handle parks upright • Lifts from 4” to 19-1/2” • Length 29”
#AF350SS-3303 (119)
3 1/2 Ton Heavy Duty JackWith Double Pumper
American Forge & Foundry
#AF3120 5 TON 6 22-1/2 56 290 748.00#AF3130 10 TON 7 23 61 400 895.00
PART NO. MODEL MIN. HT MAX HT LENGTH WEIGHT PRICE
#AF3125 5 TON 6 22-1/2 56 280 1195.00#AF3135 10 TON 7 23 61 390 1495.00
PART NO. MODEL MIN. HT MAX HT LENGTH WEIGHT PRICE
#AF3512 – Low Ht 8 1/2 “, High Ht 17”, Lift 5 3/4”, Screw extension 2 3/4” , Base 5 1/2 x 5 1/4” #AF3514 - Low Ht 7 “, High Ht 13”, Lift 4”, Screw extension 2”, Base 5 1/2 x 5 1/4” #AF3520 – Low Ht 9 5/8 “, High Ht 18 1/4”, Lift 6 3/8”, Screw extension 2 1/4”, Base 6 3/4 x 6 1/4” #AF3522 – Low Ht 7 3/4 “, High Ht 14 1/4”, Lift 4 1/4”, Screw extension 2 1/4”, Base 6 3/4 x 6 1/4” #AF3530 – Low Ht 11 “, High Ht 18 5/8”, Lift 7 5/8”, Screw extension N/A” , Base 7 x 7”
Air Hydraulic Bottle Jacks• Designed for horizontal or vertical use • Factory pre-tested to 150% of rated capacity • Bypass mechanism prevents internal damage from over pumping.
12 TON#AF5512B Low height 10”, Lift 7”, Screw 2-1/2”, High Height 19-1/2”, Base 8-1/4 x 5” 26 lbs.
20 TON#AF5520B Low height 10-1/4”, Lift 6-1/4”, Screw 2-1/2”, High Height 20”, Base 9-1/4 x 6” 40 lbs.
Factory Pretested to
150% of rated capacity
Hand Jacks With Carry Handle
#AF3506 6 TON 13lbs. 34.95#AF3512 12 TON 21lbs. 54.95#AF3514 12 TON 18lbs. 49.95#AF3520 20 TON 25lbs. 89.95#AF3522 20 TON 30lbs. 89.95#AF3530 30 TON 50lbs. 139.95#AF3550 50 TON 73lbs. 259.95
PART NO. SIZE WEIGHT PRICE
198.00
239.00
AIR & HAND OPERATEDBOTTLE JACKS
American Forge & Foundry
American Forge & Foundry
FREE SHIPPINGon $1250.00
American Forge & Foundry
By combining American Forge & Foundry Items (See pages 25 through 30 ) Within the contiguous 48 United States
American Forge & Foundry
Hydraulic Jacks
Air / Hydraulic Jacks
248.00
3 Ton Double Pumper Floor Jack#AF3003 (100) • Safety overload system • 3 Ton • low height 5” • High height 21” • Length 28-1/2” • Weight 104 lbs
Ships UPS
American Forge & Foundry
Exceeds Federal
American Forge & Foundry
FREE3 Ton Jack Stands#AF3303
Super Duty Air/Hydraulic Bottle Jacks• Welded tank and frame not pressed • Thicker Base for maximum stability • Dual return springs • Can be fully rebuilt ( not a throw away)
• Both units have a 3 pc Ram extension Kit: 3/4“, 2-3/8”, & 4”
• 35 ton unit ships UPS• 50 Ton unit ships prepaid Truck
35 & 50 Ton Air/Hydraulic Truck Jacks
#AF536 35 TON 10-5/8 23 110 995.00#AF551 50 TON 12-3/8 26-1/2 160 1375.00
PART NO. MODEL MIN. HT MAX HT WEIGHT PRICE
American Forge & Foundry
10 TON AIR JACKS
#AF3400A (205) • Multiple lifting heights through the use of exten-sions and pins • Low Ht. 18”, High Ht. 52”
10 Ton Portable Air Lift Jack
789.00
#AF565ESP7 (110)
overload protection, operating PSI 90-180 • Two boxes UPS 108 lbs & 20lbs • Freight shipments 170 lbs. includes a pallet.
22 Ton Air & Hydraulic Truck Jack with FREE Impact
695.00
American Forge & Foundry
1” Impact WrenchFREE
400.00 VALUELIMITED
QUANTITY!
#Af7685 • 1900 lbs Max Torque • 29 lbs • 6” extended anvil • 3 forward & 3 reverse speeds for control • Rocking dog hammer mechanism • AF • Weight 29 lbs (SW 34 lbs)
AIR & HYDRAULIC TRUCK JACKS
#AF3590A (31) 300 lb Capacity, Handles wheels up to 24” Diameter Enables one person to do the work without lifting or straining • Perfect for 8-10 hole budd type wheels • 300 lb. capacity • Width 30” • 8” rollers turn and pivot for alignment • 3” casters
Truck Wheel Dolly
#AF3591 (30)Enables one person to do the work without lifting or straining to remove tire / wheel Assembly. Wheel / tire assembly can be rotated left or right to line up stud holes for easy mounting.
85.00
109.00
3/4 Ton Tire Wheel Dolly
MODEL # LOW HT HIGH HT LENGTH WIDTH SHIP WAF35773591 2-1/2” 10-1/4” 31” 43” 168 499.00
American Forge & Foundry
WHEEL DOLLIES
American Forge & Foundry
2 Ton #HW93642 (100)Low Ht- 3-3/4” • High Ht- 20-1/4” • 27” x 18”
American Forge & Foundry
2 & 3 Ton Floor Jacks
329.00 479.00
• Flanged side-plates increase strength.• Full swivel rear castors for easy positioning.• Sealed hydraulic unit for improved reliability.• Automatic valve prevents overloading.• In-line pump for easy alignment.• U-joint release for exact positioning.• Removable one piece handle for easy transport.• 2 year warranty• Limited Quantity
PART NO. TYPE LOW. HT HIGH HT LIFT LENGTH WIDTH WEIGHT PRICE
AF3220 Manuel 7.5” 26.375 18.875 66” 13.8/19.7 530 2195.00AF3225 Air Assist 7.5 26.375 18.375 66” 13.8/19.7 562 2559.00
• Super long body 66” for easier lifting of vehicles with long overhangs • Handle mounted locking control lever locks handle in one of three positions - verticle, 45 degrees, horizontal.
3 Ton #HW93652 (123)• Low Ht- 5” • high ht – 23-1/2”• 31-1/2 x 15-1/2
FREEShipping in the continental USA
69
WrenchEEEE
20 Ton Heavy Duty Long Chassis Jack
American Forge & Foundry
FREE Freight within the
(Promo good thru 6/30/2017)
continental USA
• 10-Ton capacity achieved at 200-PSI air supply • 4” x 6” steel saddles adjust between 36” and 50” widths • Saddle arms
lifting and lowering control • Automatic mechanical safety lock
valve • Front swivel caster and two pneumatic rear tires for easy maneuverability • 13” Forward reach (distance from cylinder to saddles) • Ship wt. 750lbs.
#AF359855900 The AFF Air End Lift is designed with an extra-wide stance to lift the entire front or rear of large trucks, buses, industrial, heavy-duty construction equipment, and large farm vehicles.
10 Ton Air End Lift
2,695.00
American Forge & Foundry
LLLIEI
INCLUDES FREE 1” METRICIMPACT SOCKET SET
SIZES 24 to 48mm(promo good thru 6/30/2017)
#55900FREE WITHPURCHASE
INCLUDES FREE TRUCK WHEEL
DOLLY #AF3591$109.00 VALUE #AF35773951 (220) Facilitates efficient removal,
installation and transport of single, or dual truck wheel assemblies. • Lift arms adjust inward and outward for different wheel combinations • Easily position heavy wheel assemblies. • Large swivel casters • Full 7-3/4” ram lift • Six-foot safety drain secures wheels in place during removal and transport.
59.00
#PM9100GC • 4 Phillips 1, 2, 3, 4 & 3 Slotted 1/4, 5/16, 3/8 • Black tip prevents chrome shedding • Square shank allows the use of wrenches •
component handle: red for high impact and black anti-slip.
ALMOST INDESTRUCTIBLE
7 Pc Industrial Go Thru Shaft Striking Screwdriver Set
Phillips & Flat Tip
Square Shank
ProtoQuality
Super Ultra Duty.498 ShankAir Hammer• 1760 Beats Per Minute• Long 2-11/16” Piston Stroke• AC5300-A includes: Panel Cutter, Hammer, Punch and Rivet Cutter as pictured.
![[XLS] · Web viewSheet1 WIRE WERNER MOUNTED WHEEL MW914 50X12MM WRN0170 WIRE WERNER MOUNTED CUP BRUSH MC1001 50M WRN0060 WIL1500 PLIER WILL L|NOSE 35|160MM-A3 WIL0147 PLIER WILL CONCRETE](https://static.documents.pub/doc/80x56/5aa153c47f8b9a1f6d8bac3c/xls-viewsheet1-wire-werner-mounted-wheel-mw914-50x12mm-wrn0170-wire-werner-mounted.jpg)
