Top 10 Most Common HVAC Repair Issues in the Winter

Presented by

HVAC PHILLY

Just like your air conditioner is seemingly most likely to break down during the heat of the summer, so too will your heater break down on the coldest day of the year. This is why you need the best heating company to call for HVAC repair services that are prompt, efficient, and low in cost. It also helps to recognize the top 10 most common repair issues when it comes to your heater so that you can anticipate and lower the chances of a breakdown from occurring.

Dirty Filter

Changing out filters on a regular basis will help keep your furnace running smooth and avoid the most basic of repairs. Clogged filters make the heating system work harder and may damage the switch which controls the fan.

Standard Wear & Tear

Heating units have moving parts which causes the issues with airflow or even overheating which can burn up the unit from the inside. By having moving parts replaced, you can avoid many of the issues that affect your heating unit.

No Inspections or Maintenance

This s another common issue that inevitably results in a busted heating system. Annual inspections and regular maintenance corrects small issues before they become big ones. Plus, proper maintenance can help your furnace run smoothly and more efficiently.

Thermostat

A thermostat that malfunctions means that it runs the heater at the wrong time or even continually which can make life inside the home quite uncomfortable. It can also wear out the fan very quickly if not corrected.

Continuous Running

This is usually an issue with the blower which may include problems with the limit switch. You’ll need a professional company to replace it if that is the case.

Constant Cycling

This causes great wear and tear on the heater as it keeps going from “On” to “Off” modes. The dirty filter is one of the chief suspects, but it also may be that the setting for the thermostat is off as well.

Pilot Control or Electric Ignition

When either one breaks down it can become difficult for the unit to properly heat your home. Pilot lights can go out as a result of a clogged filter or drafty conditions while an electric ignition can also fail to ignite because of excessive humidity or thermocouple issues.

Noise

If you hear a lot of squeaking, rattling, or rumbling that does not normally emanate from your furnace, there are probably issues with the airflow or perhaps a clogged burner as well as mechanical problems.

Not Enough Heat

This also may be caused by a clogged or dirty filter which does not allow for enough airflow to properly heat the home.

No Heat at All

This could be the pilot light, gas, power, or thermostat setting which is not correct. There are a number of issues that can cause the heater to not work at all which makes this one of the more difficult repairs.

A reputable heating company will not only provide the best in HVAC repair services, but also proper maintenance so that your heater will keep working through the cold winter months.

HVAC PHILLY

A trusted Philadelphia heating company to provide quality HVAC repair at a price you can afford.

Call us for free estimate: 215-725-6111

Discover more about us, visit https://www.HVACPhilly.com.