EQUIPMENT gUIdERENTALToro®

R E N T A L G U I D E2

UTIlITy loAdErS

Toro® dINgo®

COMPACT

T o r o® d I N g o® | C OMPAC T u T I L I T y L O AD E R S

AuGERPOWERHEADDig up to 30” holes, down to 5-6 ft depths

HeavyUtilization and Quick ROI.Your customers can be more productive,

and you can be more profitable — with

the Toro Dingo compact utility loader.

The Dingo combines powerful performance

with incredible versatility and ease of use.

Available with an array of attachments to

meet your customers needs, the Dingo can

be rented for a wide range of applications

on any given day. The Toro Dingo is sure

todeliverhighutilization,quickROI,and

unparalledled customer satisfaction.

3

TXPLATFORMAllows stand-on operation and folds up for easy walk-behind operation

ADjuSTABLEFORkSCarryfencing,pallets,fertilizerandmore

BuCkETS 34.5", 42" and 48" widths available

LEVELER Grade, finish, spread topsoil and more

TRENCHER24", 36 and 48" booms and 4", 6", 8" and 12" chain widths available

TILLERTill more than six inches deep and 40" wide on one pass

OTHERATTACHMENTSAVAILABLE:Trench Filler, Utility Blade, Bore Drive Head and Rod & Reamer Kit (sold separately), Vibratory Plow, TX Platform, Universal Swivel Auger Power Head, Cement Bowl, Stump Grinder, High-Torque Trencher, Tree Forks, Grapple Rake, Tiller,SoilCultivator,PowerBoxRake,HydraulicBreaker,AdjustableForks,Backhoe,SnowthrowerandMulti-PurposeTool.

TX 525 - 25 hp Kubota® diesel engine

•MachineWidth:34"(41"widetrack)•Weightw/outAttachment:1904lbs(2001lbswidetrack)•Lightfootprint:5.2psigroundpressure(3.4psiwidetrack)•13.8gpmauxiliaryhydraulicflow•Two-stage,heavy-duty,remoteaircleaner

AttachmentsGenuineToroDingoattachmentsarebuilttomatchthehydraulicflowandpressuresoftheDingotomaximizepowerandperformance.ClearsightlinesandchangingattachmentsontheflymaximizetheToroDingoease-of-use,customer-friendly productivity and versatility.

*The gross/net torque of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission and operating requirements, the actual engine torque on this class of mower will be significantly lower.

TX 427 - 27 hp Kohler® gas engine

•MachineWidth:34"(or41"widetrack)•Weightw/outAttachment:1882lbs(2075lbswidetrack)•LightFootprint:5.1psigroundpressure(3.6psiwidetrack)•11.4gpmauxiliaryhydraulicflow•Two-stage,heavy-duty,remoteaircleaner

HyDRAuLICBREAkERHorizontalandverticalpositions

HydraulicAttachmentEngagement(forward and reverse)

SteeringSystem (forward, reverse, turn)

Raise/Lower/Curl/Dump

1

2

3

Patented Dingo TX Control System Operates With Three Easy Controls.

R E N T A L G U I D E4

TRX Toro®

WAlk-BEHINd TrENCHErS

T o r o® | T R X WA L k - B E H I ND T R ENCH E R

DEDIcATED TRAILERTheoptionalTRXtrailermakestowingabreezeandtheweldedguides in the bed ensure correct loading, along with a sliding bar in back to pins the machine in place – easy to tow, easy to rent.

A Rental Staple. Redefined.The Toro TRX tracked trenchers redefine dedicated walk-behind

trenchers. Employing the same patented control system as the Toro

Dingo TX, these TRX trenchers set a new standard for true two-hand

ease of use — so intuitive and simple to operate, you can easily explain

the control system to your customer in a matter of minutes. Dedicated

tracks allow your customer to traverse challenging terrain quickly

and cross-trench effectively. Designed with a balanced, low center

of gravity, the TRX does not require a front trailing wheel which can

hinder turning; become stuck or pull spoils back into a trench.

Unit shown with optional Crumber Attachment

R E N T A L G U I D E 5

boRING UNITMakeeasyworkofpipeinstallation

TRXACCESSORIES

BACkFILLBLADEEasily fill in any trench

cRUmbERFor clean bottom trenches

Toro® TRX walk-behind trenchers are as easy to operate as they are to rent.

TRX•ThreeModels:TRX-1,TRX-20&TRX-26•TX-stylecontrolsystem•kawasaki®V-Twinengines •34"widthallowseasyaccessthrough 3-footopening•10gpm(TRX-16&20)or 13.5gpm(TRX-26)@2900psi•Weight:1100–1248lbs•BoomDepthOptions:24",36"and48"•ChainWidthOptions:4",6"and8"•ChainTypes:Soil-CupTooth,Combo (RockandSoil),“Shark™”Welded RockToothand“Bullet”RockTooth

1

2

3

TRX Control System Operates With Three Easy Controls.

ChainEngagement(forward and reverse)

SteeringSystem (forward, reverse, turn)

TrencherBoomDepth (up and down)

SteeringSystem (forward, reverse, turn)

Sweep,lift/lowerandengagementofgrinderhead

1

2

STX Control System Operates With Two Easy Controls

STX Stump Grinders•TwoModelsAvailable:STX-26andSTX-38 •Fullhydraulicoperation—nobeltstoadjustorcogged pulleysandclutchestoreplace•Offsetcuttingheadprovidesexcellentvisibility•Tracksofferexceptionalsidehillstability•Transportspeedsexceeding4mph•33.5"–5"wide—easilyfitsthrough36"gates•TX-stylecontrolsystem•Trackdesignallowsforzeroturncapability•kX-730Vkawasaki®orkohler®CV980engines•Weight:1200–1800lbs•HeadSwing:47"–52"arc•Wheel:19–22.25"diametertotooth•Twelve3-positionteethforcutting

R E N T A L G U I D E6

TREE CARE Toro®

EQUIPMENT

DEDICATEDTRAILERAVAILABLEAs shown on page 4.

T o r o® | T R E E c A R E E Q U I p m E N T

Reliable Performance.Day In, Day Out.Toro® STX stump grinders are built for the daily rental grind.

The hydraulically driven head means no chance of expensive

belts breaking or slipping, and no tension adjustments.

The head also features a built-in braking system — within

3 seconds of operator releasing the joystick, the head stops.

Above all, they’re easy for your customers to use with TX-

style controls, tracks for maneuverability, and transport

speeds exceeding 4 mph for productivity.

BC-25 Brush Chipper•High-outputkohler®CommandProCH725engine•Twodouble-sidedcutterblades•Heavy-dutycentrifugalclutch•RubberTorsionsuspensionaxleforsmoothtrailering•Adjustableswing-awayjackfeaturespneumatictires •Oneboltremovalforquickaccesstobladeand wheelmechanismforcleaningandmaintenance•Trailerlightsstandardonallchippers•Width:35"•Weight:1053lbs•Throat:7"x8"•Capacity:6"diameter

LS-9 Log Splitter•Subaru®EX72engine•9"solidsteelwedge•10-gallonhydraulictank•Rubbertorsionsuspensionaxleforsmoothtrailering•Horizontalorverticaloperation•Adjustableswing-awayjackfeaturespneumatictires•Trailerlightsstandardonalllogsplitters•Width:50"•Weight:715lbs•Ratedat28ton•Stroke:24"

SHARPENINGSERVICEAVAILABLEFORCHIPPER.See Pro-Sharp on back page.

SHARPENINGSERVICEAVAILABLEFORPATENTEDQuADRuBLADE.See Pro-Sharp on back page.

R E N T A L G U I D E7

T o r o® | T R E E c A R E E Q U I p m E N T

SGR-6 and SGR-13 Handle Bar Stump Grinders•Honda®GX200orGX390engines•Well-balancedmachineequatestoless “muscling”ofmachinewhilecutting•Quadrublade™designallowseasy replacementofallteethwithinminutes•Rubbergasketsbetweencomponents resultsinlessoperatorvibration•Lifthandlesforeasyloading•Weight:110lbs/275lbs•CuttingDepth:6"/11"•Centrifugalclutch•Wheel:9.5"diametertotooth

T o r o® | T u R F R E NOVAT I ON E Qu I PM EN T

EQUIPMENT

Toro® TURFRENOVATION

R E N T A L G U I D E8

Durable and Easy to Use.Designed for landscape contractors

and DIY customers, these units are

compact and loaded with features.

Mechanicalunitshavecontrolssimilar

to a mower, so they're intuitive and easy

to use. Hydraulic units offer excellent

maneuverability. And quick fold-down

handles make the walk-behind models

easy to transport. From the unibody

frames to the high-carbon, heat-treated

spring steel blades, every product is

built tough for heavy rental use.

R E N T A L G U I D E 9

T o r o® | T u R F R E NOVAT I ON E Qu I PM EN T

18" Mechanical•Honda®GSV190engine•AeratingWidth:18"•OverallMachineWidth:28.5"•Weight:184lbs(noweights);238(withweights)•Height:25"(handlefolded)•24selfcleaningtines

18" Mechanical Seeder•HondaGX160engine•SeedingWidth:18"•OverallMachineWidth:27.5"•Weight:184lbs•Height:23"(handlefolded)•9verticuttingbladeswith2"spacing•1600cu.in.seedbox

18" Power Rake•HondaGX160engine•DethatchingWidth:18"•OverallMachineWidth:27.5"•Weight:125lbs•Height:23"(handlefolded)•22flailbladeson1.5"spacing•Bladeengagementby centrifugalclutch

21" Single Hydraulic•kawasaki®Fj180engine•AeratingWidth:21"•OverallMachineWidth:31.5"•AeratingSpeed:upto4mphfwd/2.2mphrev•Coverage:0.8acreperhour•Pullplugsupto4"deepdependingon groundconditions

30" Stand-On•kawasakiFS481V-Twinengine•AeratingWidth:28"•OverallMachineWidth:47.5"•AeratingSpeed:upto7.5mphfwd/2.2mphrev•Coverage:2.1acresperhour•Pullplugsupto5"deepdependingongroundconditions

20" Hydraulic Seeder•Honda®GXV270engine•SeedingWidth:20"•OverallMachineWidth:31.5"•GroundSpeed:3mphfwd/2.2mphrev•Weight:255lbs•40lb.seedboxcapacity

Slit Seeders & Power Rakes

Aerators

R E N T A L G U I D E10

T o r o® | C ONC R E T E & MA SONRy E Qu I PM EN T

Concrete Mixers •FiveModels:CM-658H-S, CM-958H-P,CM-958H-SED, CM-958H-PED,CM-1258y-SD•BatchCapacity:6–12cuft•BatchCapacityBags:1/2–2•HondaGX240or yanmarL100Vengines•Weight:690–897lbs

EQUIPMENT

Toro® CONCRETE& MASONRY

Electric Concrete Mixers•ThreeModels:CM-250E-PPL,CM-250E-PWB,CM-250E-PC,•ThreeConfigurations:Pedestal,Wheelbarrow,Combination•BatchCapacity:2cuft•BatchCapacityBags:1/4•1/3hpelectricmotor•Weight:113–1148lbs

From mixing to hauling to finishing, Toro’s new concrete and masonry line has you covered.

11

Concrete Vibrator•FiveModels:VIB-1,VIB-1.5,VIB-2,VIB-2.5,VIP-3•ElectricorHondaGXH50engines•Weight:12–29.5lbs

Screed•FourModels:VS-400,VS-800,VS-70,VS-80•Beamlength:4–30ft•HondaGX160orGX25engines•Weight:25–134lbs

Mortar Mixer•NineModels:MM-650E-S MM-655H-S,MM-655H-P, MM-658H-P,MM-658H-S, MM-850E,MM-858H-S, MM-858H-P,MM-12511H-S•BatchCapacity:6–12cuft•BatchCapacityBags:1–4•ElectricorHondaGX160, GX240,orGX340engines•Weight:535–1073lbs

Power Trowel•FourModels:PT-36,PT-36PP,PT-46,PT-46PP•Honda®GX160orGX240engines•Contouredadjustablehandle•Rotatingstabilizingring•Stationaryguard•Liftingeye•Shippedassembled•Weight:219–239lbs•PatentedPro-Pitch™bladeadjustmentavailable•PatentedDyna-Clutch™safetyfeature

MS-1 Masonry Saw•CutDepth:5"•1.5hpelectricmotor•14"bladecapacity•Stay-levelaluminumbladeguardwith210° ofbladecoverage•45°/90°miterguide•Castaluminumconveyorcart•Paddedbladelever•Foldinglegkitstandard•Splashguard•Weight:163lbs

MB-1600Mud Buggy•Capacity:16cuft•HondaGX390engine•TravelSpeed:upto7mph•Weight:1440lbs•Liftawayenginecover •Patentedoversized brakepedal•Handlebar-mountedspeed anddirectioncontrols

T o r o® | C ONC R E T E & MA SONRy E Qu I PM EN T

TheseTough,SensibleMachinesMeanBusiness.Frommixingtohaulingtofinishing,Toro’snewconcreteandmasonrylinehasyoucoveredwitharangeofoptionsfordifferenthardscapeapplications.TheseformerStoneConstructionEquipmentproductsarebuiltonahistoryofqualitymanufacturingandlegendarydurability.Andtheentirelineisdesignedwitheasy-to-usecontrolsandeasyaccesstomaintenancepointsforfasterservice.Italladdsuptoreliabilitythatkeepsyourcostofownershipdown.

R E N T A L G U I D E 12

Concrete Saw•TwoModels:CS-1,CS-2•CutDepth:35/8"w/12"blade,45/8"w/14" blade,55/8"w/16"blade,65/8"w/18"blade•Honda®GX340orGX390engines•CS-1:Frontcuttingguide,14"bladecapacity•CS-2:Lifteye;4"wheeledfrontcutting guide;adjustablehandles;depthgauge; 18"bladecapacitystandard(14"or16" capacityalsoavailable)•Weight:216–333lbs

R E N T A L G U I D E13

T o r o® | c o m p A c T I o N E Q U I p m E N T

COMPACTIONToro®

EQUIPMENT

Rammer•ThreeModels:VR-2650,VR-3100,VR-3500•Honda®GX100orGX120engines•ImpactForce:2650–3500lbs•Max.Productivity:3,500–3,575sqft/hr•Max.TravelSpeed:70ft./min.•PlateSize(WxL):10"x13"or11"x13"•Weight:132–154lbs

Hard-Hitting Performance.Superior performance and easy service define Toro’s new compaction line.

Designed to deliver maximum impact force without excess weight, they're

built to last with precision components for maximum durability.

TR-34 Trench Roller•CentrifugalForce:15709lbs•Hatz®2G40engine•Max.Productivity:10798sqft/hr•Max.TravelSpeed:68ft./min.(lowwithvib); 136ft/min(highwithoutvib)•TotalForceApplied:18809lbs•VibrationFrequency:2000vpm•Weight:3100lbs•Radio-frequencyremotecontrolworksup to100feet

Forward Plate•ThreeModels:FP-2200,FP-3000,FP-4000•EccentricForce:2200–4000lbs•HondaGX120orGX160engines•Removablewatertankandrollcage•MaxProductivity:6,500-10,000sqft/hr•MaxTravelSpeed:100ft/min•PlateSize(WxL):13"x21"or20"x24"•VibrationFrequency:6100–5200vpm•WaterTankCapacity:7.5–13qt•Weight:140–215lbs

Reversible Plate•Fivemodelsavailable•CentrifugalForce:4,945–14,164lbs•Superiorcompactionpowerinanydirection•Weight:264–1,014lbs

©2012 The Toro Company 490-8529

Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features. We reserve the right to improve our products and make changes in specifications, designs and standard equipment without notice and without incurring obligation. See your dealer for details on all of our warranties.

Toro Proudly Supports Rental BusinessesToro’s reputation for quality-built, reliable products serves the rugged demands of the rental industry well.

A Toro machine in your rental fleet is a machine ready to go to work and provide the productive power your

customers want. All Toro equipment is also designed with the user in mind, offering easy-to-use controls and a

variety of built-in safety features. It all adds up to a line of equipment that’s in demand and will deliver a solid

return on your investment for years to come.

Call your local Toro Rental Representative today or visit toro.com/rental for more information.

BLADE SHARPENINGPro-SHArP

Toro is pleased to offer Pro-Sharp Blade Sharpening Service

to our valued customers — you'll always have sharp blades for your

Toro equipment.

Toro’s Pro-Sharp Blade Sharpening Service is very similar to a

propane tank exchange program. Simply use the sharp blades from

your tote, and when you install the second to last sharp set from

your tote you’re ready to order Toro’s Pro-Sharp sharpening service.

Available on handle bar stump grinders

and brush chippers. For pricing, questions

or to order visit toro.com/Pro-Sharp or

call 1-800-348-2424ext.4997.

SErVICE

TORO’SPRO-SHARPBLADE-SHARPENINGSERVICE:•Helpsyouensurecustomer satisfaction•Controlexpenses•Maximizeprofitability

GetMoreFromToro