of 23
8/2/2019 TOSHIBA TLP-S10
1/23
The most trusted, dependable name
in projector lamp sales.
http://www.myprojectorlamps.com
http://www.myprojectorlamps.ca
http://www.myprojectorlamps.eu
The following projector manual has not been modified or altered in any way.
http://www.myprojectorlamps.com/http://www.myprojectorlamps.com/http://www.myprojectorlamps.ca/http://www.myprojectorlamps.ca/http://www.myprojectorlamps.eu/http://www.myprojectorlamps.eu/http://www.myprojectorlamps.eu/http://www.myprojectorlamps.ca/http://www.myprojectorlamps.com/8/2/2019 TOSHIBA TLP-S10
2/23
Others
Mainten
ance
Operat
ions
Preparations
BeforeUsing
OWNERS MANUAL
3LCD DATA PROJECTOR
TLP-S10 (SVGA)
8/2/2019 TOSHIBA TLP-S10
3/23
8/2/2019 TOSHIBA TLP-S10
4/23
8/2/2019 TOSHIBA TLP-S10
5/23
6
IMPORTANT SAFETY INSTRUCTIONS (Continued)
16. Damage Requiring ServiceUnplug this product from the walloutlet and refer servicing toqualified service personnel underthe following conditions:
a) When the power-supply cord orplug is damaged.
b) If liquid has been spilled, or
objects have fallen into theproduct.c) If the product has been exposed to
rain or water.d) If the product does not operate
normally by following the operatinginstructions. Adjust only thosecontrols that are covered by theoperating instructions as animproper adjustment of othercontrols may result in damage andwill often require extensive work bya qualified technician to restorethe product to its normal
operation.e) If the product has been dropped or
damaged in any way.f) When the product exhibits a
distinct change in performance -this indicates a need for service.
17. If glass components,including lens and lamp,should break, contact yourdealer for repair service.This product incorporates glass
components, including a lens anda lamp. If such parts shouldbreak, please handle with care toavoid injury and contact yourdealer for repair service. Thebroken pieces of glass may causeto injury. In the unlikely event ofthe lamp rupturing, thoroughlyclean the area around theprojector and discard any edibleitems placed in that area.
18. ServicingDo not attempt to service thisproduct yourself as opening orremoving covers may expose youto dangerous voltage or otherhazards. Refer all servicing toqualified service personnel.
19. Replacement PartsWhen replacement parts arerequired, be sure the servicetechnician has used replacementparts specified by themanufacturer or have the samecharacteristics as the original part.
Unauthorized substitutions mayresult in fire, electric shock, orother hazards.(Replacement of the lamp onlyshould be made by users.)
20. Safety CheckUpon completion of any service orrepairs to this product, ask theservice technician to performsafety checks to determine thatthe product is in proper operatingcondition.
21. Do not leave thermal-paper documents or edeformed items on topthe unit or near the airexhaust for long perioof time.The heat from the unit could
the information on the thermpaper, or cause deformation warping.
8/2/2019 TOSHIBA TLP-S10
6/23
8
LABEL LOCATIONS
MANUFACTURED;
SERIALNO.
WARNING LabelCAUTION Label
MODEL NO. /RATING Label
SERIAL NO. Label
WARNING Label
CAUTION Label
If your line voltage is 220 to 240V, u
Plugconfiguration Plug type Line
EURO
UK
220
220
Use a 5A fuse which is approved by or BSI to BSI362.Always replace the fuse cover afterchanging the fuse.
IMPORTANT PRE
Save Original Packing MaterialsThe original shipping carton and pa
ship your LCD projector. For maximpacked at the factory.
Moisture CondensatioNever operate this unit immediatelyWhen the unit is exposed to such a the crucial internal parts. To preventat least 2 hours when there is an ex
Place and Manner of In Do not place in hot locations, such
malfunction, and shorten the life of Avoid locations with oil or cigarette
optical parts, shortening their lives, Do not place slantwise in angle of 2lamp.
Using this instrument near a TV or sound. If this happens, move it awa
Moving the projector from a low-temcause condensation on the lens or it in that situation, the malfunction mnaturally disappears.
In a high altitude location where airuse it with the ambient temperature
POWER SUPPLY
8/2/2019 TOSHIBA TLP-S10
7/23
8/2/2019 TOSHIBA TLP-S10
8/23
8/2/2019 TOSHIBA TLP-S10
9/23
8/2/2019 TOSHIBA TLP-S10
10/23
8/2/2019 TOSHIBA TLP-S10
11/23
8/2/2019 TOSHIBA TLP-S10
12/23
8/2/2019 TOSHIBA TLP-S10
13/23
8/2/2019 TOSHIBA TLP-S10
14/23
8/2/2019 TOSHIBA TLP-S10
15/23
8/2/2019 TOSHIBA TLP-S10
16/23
8/2/2019 TOSHIBA TLP-S10
17/23
8/2/2019 TOSHIBA TLP-S10
18/23
8/2/2019 TOSHIBA TLP-S10
19/23
8/2/2019 TOSHIBA TLP-S10
20/23
8/2/2019 TOSHIBA TLP-S10
21/23
8/2/2019 TOSHIBA TLP-S10
22/23
40
I CONTROL terminal
G Pin assignment
768
5
4
3
2 1
Signal Name
RXD
CTS
DSR
GND
RTSN.C
TXD
N.C
Pin No.
1
2
3
4
56
7
8
Description
Receiving data
Consent to send
Data set ready
Signal ground
Request to sendNo connection
Sending data
No connectionMini DIN 8 pin connector
G Interface format1 Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits;
Stop Bit Length: 1 bit
2 Communication format STX (02h) Command (3Byte) ETX (03h)
Only 1 command valid per communication.
3 Data format For input commands, only ASCII-compliant all-uppercasealphanumeric characters supported.
4 Replies Acknowledge ACK (06h) CR (0Dh) Data ... Normally ended
ACK (06h) ESC (1Bh) ... Aborted
No acknowledge NAK (15h)
If commands are to be sent consecutively, wait for the response from the projectorbefore sending the next command.
G Main Commands
Note
Contact your dealer for control cable and other commands.
I Separately Sold ProductReplacement Lamp Model TLPLV3
Note
Design, specifications, etc. subject to change without notice for improvements, etc.
Item Command
Power on PON
Power off POFIcon display on MO0
Icon display off MO1
Auto setting (RGB input) PAT
Status display on DONStatus display off DOF
Specifications (Continued)
Item Command
Computer input select IN1
Y/PB/PR input select IN2Video input select IN3
S-video input select IN4
8/2/2019 TOSHIBA TLP-S10
23/23
