TOTAL WASHDOWN SOLUTIONS · 10 BAR 35l/min 93°C Features ... Always consult factory for product...

save water save money save time

VICTORIA, AUSTRALIA27 Shearson Cres

Mentone 3191www.sprayingsolutions.com.au

[email protected]+61 3 9583 2368

HAMILTON, NEW ZEALAND532C Grey Street

Hamilton East 3216www.sprayingsolutions.co.nz

[email protected]+64 (0)7 839 6444

TOTAL WASHDOWN SOLUTIONSA PRODUCT FOR EVERY BUDGET AND APPLICATION

ALL FROM ONE SOURCE

VARIABLE SPRAY WASHDOWN TRIGGER GUNS

The Mini M-70LF Series is designed for heavy duty cleaning in all industrial applications, and is suitable for both hot and cold wash down applications. This compact and easy to handle spray nozzle weighs only 0.8 kg yet it provides the same high quality product expected from the industry proven range of Strahman wash down equipment, whereby utilising the same modern and innovative engineering principles and premium quality parts.

Derived from the same family of Strahman premium heavy duty M-70 Series Nozzles, the Mini M-70LF Series by Spray Nozzle Engineering is a water efficient spray nozzle designed to reduce potential water wastage by providing an optimum cleaning performance at lower flow rates, suitable for most industrial wash down applications.

Unlike most wash down guns typically utilised throughout the industry, the Mini M-70LF Series offers the water saving benefits without compromising on performance. With adjustable spray pattern controlled by the trigger, you have the flexibility to vary and control the spray on demand while its ergonomic design via the palm trigger reduces operator fatigue during prolonged use.

Pressure (Bar) 0.5 1.0 2.0 3.0 4.0 5.0 6.5 10.0

FLow rate (ℓ/min) 4.5 5.0 6.2 7.3 8.5 9.5 10.5 13.5

ESC VEET APPROVED PRODUCT(35-LOW FLOW TRIGGER NOZZLE)

SMART APPROVEDWATERMARK

• Maximum working pressure = 10 Bar

• Maximum recommended operating temperature = 93°C

• Includes either ½” or ¾” swivel hose barb fitting as standard (must specify size required on order)

• Fully serviceable with readily available parts and service kits

Consistent spray pattern changes even at low flow rates

Instant ‘Water Shut-Off System’ ensure no water loss after the trigger is released

Long handle design grip for whole hand placement

Stainless Steel seat design stops water leakage at nozzle seat

Available in Bronze or Full Stainless Steel Construction

Heavy Duty replaceable rubber cover, available in Black or White

LOW FLOW LOW PRESSURE

MINI M-70LF Theoretical Pressure vs Flow rate

Order Part Number Material Colour

MINI M-70LF-BK Bronze Black

MINI M-75LF-WH Bronze White

MINI S-70LF-BK Stainless Steel Black

MINI S-75LF-WH Stainless Steel White

PREMIUM RANGEFLOW-FLOW WATER SAVING TRIGGER NOZZLEThe water efficient washdown nozzle for maximum water savings

Technical Data

Always consult factory for product suitability.

1800 NOZZLEAU +61 (03) 9583 2368 www.sprayingsolutions.com.auNZ +64 (07) 839 6444 www.sprayingsolutions.co.nz

1

Strahman spray nozzles are proven to be the best on the market.

Hydro-Pro 150® is the most advanced spray nozzle, featuring a patented, locking trigger mechanism that allows users to lock in a desired spray pattern without having to maintain pressure on the trigger. It also reduces misdirected spraying.

• Modern and innovative engineering with premium quality parts

• Stainless steel housing for strength and durability

• Lightweight and ergonomically designed

• Waterproof nylon cover that resists cracks and abrasions

• Stays cool even when using water as hot as 93°C

• Spare parts available to service gun

Our Swivel-Pro™ swivel adapter features an exclusive ergonomic design. The swivel adapter increases nozzle control to allow circular, horizontal and vertical nozzle movements - while maximizing your comfort and safety.

Stainless steel construction for strength and durability, and it is supplied with vinyl boot for heat transfer protection.

Available in 1/2”, 5/8”, and 3/4” ID Hose Barb or 3/4” GHT.

Max. Pressure Max. Flow Max. Temperature

10 BAR 35l/min 93°C

Features


HP-150-BK Stainless Steel Black

HP-150-RE Stainless Steel Red

HP-150-WH Stainless Steel White


MEDIUM FLOW LOW PRESSURE

PREMIUM RANGEHYDRO-PRO 150® MEDIUM FLOW WASHDOWN GUNSThe water efficient washdown nozzle for maximum water savings

• Available in Black, Red and White; with or without swivel adapter

NOTE: Intended for water use only. Not suitable for steam service. Can be used with Strahman steam/water mixers

HYDRO-PRO 150® SERIES Low Pressure Variable Spray Gun

Swivel-Pro™ Adapter



2



PREMIUM RANGEM-70 & S-70 MEDIUM FLOW SPRAY GUNSThe water efficient washdown nozzle for maximum water savings

Strahman spray nozzles are proven to be the best on the market. • Modern and innovative engineering with premium

quality parts • Long handle design grip for whole hand • Replaceable (heavy duty) renewable rubber

cover placement• Stainless steel seat design prevents nozzle seat

leakage• Instant water Shut-off when trigger is released• Spare parts available to service gun

• Washdown Applications in:• Food & Dairy • Kitchens/ Hotels/ Restaurants• Beverage • Pharmaceutical• Meat, Fish & Poultry• Other General Industries


10 BAR 23ℓ/min 93°C

Features Applications

Order Part Number Material Colour Order Part Number Material Colour

M-70-BK Bronze Black S-70-BK Stainless Steel Black

M-70-RE Bronze Red S-70-RE Stainless Steel Red

M-70-WH Bronze White S-70-WH Stainless Steel White

• Available in Black, Red and White• Available ½”, ”, ¾” ID hose barb, or ¾” GHT swivel adapter

with locking ring• 1-year limited warrantyNOTE: Intended for water use only. Not suitable for steam service. Can be used with Strahman steam/water mixers.

M-70 & S-70 SERIES Low Pressure Variable Spray Gun

Our Swivel-Pro™ swivel adapter features an exclusive ergonomic design. The swivel adapter increases nozzle control to allow circular, horizontal and vertical nozzle movements - while maximizing your comfort and safety.

Stainless steel construction for strength and durability, and it is supplied with vinyl boot for heat transfer protection.

Available in 1/2”, 5/8”, and 3/4” ID Hose Barb or 3/4” GHT.

Swivel-Pro™ Adapter



3


• Water-saving trigger nozzles• Heavy duty protective covers & bumpers• Bronze & stainless steel construction• Variable spray patterns, trigger controlled• Optional swivel attachments available• Various colours to match HACCP zones


Max. Pressure Max. Flow Max. Temperature Inlet

150PSI 23ℓ/min 60°C 1/2”FBSP

Swivel Code Size Materials

HB- 3/8-SS-SWV 1/2”M x 3/8” Hose Stainless SteelHB- 1/2-SS-SWV 1/2”M x 1/2” Hose Stainless SteelHB- 3/4-SS-SWV 1/2”M x 3/4” Hose Stainless SteelHB- 1-SS-SWV 1/2”M x 1” Hose Stainless SteelHB- 1/2-MxM-SS-SWV 1/2”M x 1/2” Male Stainless Steel


10 BAR 25ℓ/min 60°C 1/2” FBSP

Available in White, Black, Blue, Yellow, Red and Grey.Note: Flow version available in 70l/min e 10 bar approx.



VARIABLE SPRAY WASHDOWN TRIGGER GUNS & SWIVELS

ECONOMY RANGETM-HBBB-001 MEDIUM FLOW SPRAY GUNThe water efficient washdown nozzle for maximum water savings

SWIVELS Low Pressure Swivels - Stainless Steel

TM-HSBB-001 Low Pressure Variable Spray Gun - Stainless

OPTIONAL ACCESSORIES Insulated Trigger Guard

TM-HBBB-001 Low Pressure Variable Spray Gun - Brass

Order Part Number Colour

TM-HBBB-001 BlueTM-HSBB-001-BK BlackTM-HSBB-001-GR GreyTM-HSBB-001-RE RedTM-HSBB-001-YE YellowTM-HSBB-001-WH White


4




150PSI 25ℓ/min 60°C 1/2”FBSP


150PSI 25ℓ/min 60°C 1/2” FBSP

To take threaded rinsing lances or nozzles



TM-HSBB-300-BL Stainless Steel Blue

TM-HSBB-200-BL Stainless Steel Blue




ECONOMY RANGETM-HBBB SPRAY GUNSThe water efficient washdown nozzle for maximum water savings

TM-HSBB-200 Male 1/2” Threaded Outlet Gun

Take foam rinsing lances

TM-HSBB-300 Quick Release Coupler Outlet Gun


5

• Water-saving trigger nozzles• Heavy duty protective covers & bumpers• Bronze & stainless steel construction• Variable spray patterns, trigger controlled• Optional swivel attachments available• Colour coded



150PSI (10.3 BAR) 140ℓ/min 75°C 1/2”FEMALE




Order Part Number Material Colour Part number Material Colour

TM-HSAN-100-BL Stainless Steel Blue TM-HBAN-100-BL Brass Blue

TM-HSAN-100-RE Stainless Steel Red TM-HBAN-100-RE Brass Red

TM-HSAN-100-WH Stainless Steel White TM-HBAN-100-WH Brass White




ECONOMY RANGEWATER SAVER ‘TWIST’ HOSE NOZZLESThe water efficient washdown nozzle for maximum water savings

TM-HSAN-100 SERIES Low Pressure - Stainless Steel or Brass



6

• Increase cleaning velocity with compressed air injection

• Twin 10mm hose barb parallel ports• Aluminum construction with plastic nozzle• Light weight• Built in hanging hook

• Soft spray shower pattern• Ergonomic in-line design• Plastic PA66 FDA construction with stainless

trigger spring• Where light rinsing is required

• Boot & Apron Washing• Carcass Cleaning• Bin & Table Cleaning

• Pre-rinse Applications• Work Areas Requiring Low Flow• Reduced Weight


5 BAR APPROX. 5ℓ/min 70°C 2 X 10mm


7 BAR APPROX. 23ℓ/min 60°C 1/2” FEMALE

Features

Features

Applications

Applications







ECONOMY RANGEAIR WATER MIX GUNSSpecial purpose shower guns

TM-HAWB-100 Air Water Mix Trigger Gun

TM-HPSB-100 Water Trigger Gun


7

• Water-saving trigger nozzles• Heavy duty protective covers & bumpers• Bronze & stainless steel construction• Variable spray patterns, trigger controlled• Optional swivel attachments available• Durable impact resistant molded handle

• Food & Dairy • Kitchens/ Hotels/ Restaurants• Beverage • Pharmaceutical • Other General Industries


24 BAR 90 ℓ/min 90°C 1/2” FBSP



HBBB-65BS Blue

HBBB-65RS Red


Upgrade to a hose reel packageMANUAL & SPRING REWIND STAINLESS STEEL REELS• Reduce hose trip hazards• Extend hose lifeAvailable with Safe-R-ReelTM rewind speed control system.

OPTIONAL UPGRADE


Ask Us About upgrading Your Washdown Package With a Safer Stainless Hose Reel Storage System

TRIGGER NOZZLES

ECONOMY RANGEHBBB-65 MEDIUM FLOW SPRAY GUNSThe water efficient washdown nozzle for maximum water savings

HBBB-65 SERIES Low Pressure Variable Spray Gun With Swivel


8

Order Part Number Material Length

TM-SNQC-220-LAN Stainless Steel 22cm

TM-SNQC-500-LAN Stainless Steel 50cm


TM-SNQC-500-LAN-FN Stainless Steel 50cm

Order Part Number Material

TM-SFQC Stainless Steel

MEDIUM-HIGH FLOW LOW PRESSURE


LANCES AND GUN ACCESSORIES

ECONOMY RANGELANCES AND GUN ACCESSORIES FOR ENTRY LEVEL TRIGGER GUNS (Quick Coupler and Threaded Outlet Only)

TM-SNQC SERIES Quick Coupler Lance Stainless (316) x 1/2” Female

Stainless Lance With Protected Foam Nozzle

Quick Coupler Stainless Adaptor With Foam Nozzle


TM-SNF-220-LAN Stainless Steel 22cm

TM-SNF-500-LAN Stainless Steel 50cm


TM-HBBB-220-LAN Stainless Steel 22cm

TM-SNF SERIES Threaded Lance Stainless (316) x 1/2” Female

TM-HBBB SERIES 1/2” Lance Mounting Gun


9

HIGH FLOW LOW PRESSURE




10 BAR 60ℓ/min 60°C 1/2”FBSP






ECONOMY RANGETM-HBBB-001-HF HIGH FLOW SPRAY GUNThe water efficient washdown nozzle for maximum water savings


TM-HBBB-001-HF High Flow Low Pressure Variable Spray Gun - Brass


TM-HBBB-001-HF Blue

Insulated Trigger Guard

OPTIONAL ACCESSORIES


10

Order Part Number Material Description

TM-HSVB-100 Stainless Steel Guarded ball valve in stainless steel(316); ½” female x quick release coupler with rubber protection

TM-HSVB-200 Stainless Steel Shielded in stainless steel(304); ½” female x quick release coupler with rubber protection

TM-HSVB-300 Stainless Steel Shielded in stainless steel(304); Inlet and Outlet Connections: ½” female

• On/Off function is protected from application impact

• Valve can take variety of lance/nozzle adaptors

• Heavy duty stainless body version

• Suitable for continuous use application

• Continuous use washdown

• Large area cleaning

• Where anti impact protection is required

TM-HSVB-200


TM-HSVB-300

TM-HSVB-100

Max. Pressure Max. Temperature Inlet

60 BAR 95°C 1/2”FEMALE


LANCES AND GUN ACCESSORIES

HIGH FLOW LOW PRESSURE

ECONOMY RANGELANCES AND GUN ACCESSORIESShielded ‘Half-turn’ Valve System

TM-HSVB SERIES


11

The M-144 Safety Unit, newly redesigned with the lastest innovations, blends steam and cold water in any desired proportion; features a safety steam shut-off which prohibits passing live steam. User adjustable with a factory-set maximum temperature, this unit is equipped with dial-type gauge that indicates the exact wash temperature in both Celsius and Fahrenheit. For maximum efficiency, it is recommended that a Strahman hose assembly (with shut-off nozzle) be used in conjunction with this unit. Hard piping from the unit discharge, or use with an open-ended hose, is not recommended.

SpecificationsMinimum working pressure 20 psi/1.4 bar steam

20 psi/1.4 bar cold water

Maximum design pressure: 150 psi/10.3 bar

Maximum operating pressure: 80 psi/5.5 bar steam 80 spi/5.5 bar water

Factory-set maximum temperature of: 200°F/93°C

Safety steam shut-off

For proper operation, water pressure should not exceed steam pressure

Please see reverse side for parts listing.

M-144TG Safety Mixing Unit

USA Headquarters 2801 Baglyos Circle Bethlehem, PA 18020

Phone: (484) 893-5080 Fax: (484) 893-5099 Toll Free: (877) STRAHMAN

www.strahmanvalves.com

Shown: Bronze M-144TG with globe valves; shown with premium hose assembly and M-70 Series nozzle

Last Updated: March, 2015

It is recommended that a strainer and steam trap be used in conjunction with all of our steam mixing units.

Foreign deposits in supply lines can affect ball check durability.

Proper steam and water treatment is recommended to ensure proper perforamance and durability.

This unit should be shut off when not in use for extended periods of time.

FranceSavoie Hexapole, F-73420 Mery, France

Tel: 33 (0) 4 79 35 78 00Fax: 33 (0) 4 79 35 78 20

GermanyKirchstrasse 16, D-77855, Achern, Germany

Tel: 49 (0) 7841-6846530Fax: 49 (0) 7841-6846531

• Safety steam shut-off

• For proper operation, water pressure should not exceed steam pressure

Max. Pressure Max. Temperature

150PSI (10.3 BAR) 93°C

M-144TG Safety Mixing Unit

OPTIONAL UPGRADE

The M-144 Safety Unit, newly redesigned with the latest innovations, blends steam and cold water in any desired proportion; features a safety steam shut-off which prohibits passing live steam. User adjustable with a factory-set maximum temperature, this unit is equipped with dial-type gauge that indicates the exact wash temperature in both Celsius and Fahrenheit. For maximum efficiency, it is recommended that a Strahman hose assembly (with shut-off nozzle) be used in conjunction with this unit. Hard piping from the unit discharge, or use with an open-ended hose, is not recommended.

Features

PREMIUM RANGE MIXING UNITS

Ask us about upgrading your mixer with HP-150 ergonomic gun range

Image shown: Bronze M-144TG with globe valves with premium hose assembly and M-70 Series nozzle

SAFETY MIXERS



12

Strahman M-159 (bronze) and M-750 (stainless steel) Mixing Units-Hose Stations are designed to thoroughly mix hot and cold water in any desired proportion.

Our Temperature Indicating (TG) models are equipped with a blending chamber and quick acting dial-type dual Fahrenheit and Centigrade temperature gauge, which accurately indicates the water’s temperature exiting a specially designed blending chamber.

NOTE: Not suitable for steam service

Images shown with premium hose assembly and M-70 Series nozzle

Note: Foreign deposits in supply lines can affect ball check durability.


150PSI 10GPM 93°C

Features

Order Part Number Valve Material Order Part Number Valve Material

Standard models Temperature Indicating (TG) models

M-159-GLOBE Globe Bronze M-159TG-GLOBE Globe Bronze

M-159-BALL Ball Bronze M-159TG-BALL Ball Bronze

M-750-GLOBE Globe Stainless Steel M-750TG-GLOBE Globe Stainless Steel

M-750-BALL Ball Stainless Steel M-750TG-BALL Ball Stainless Steel

• Single ¼ turn to On/Off position• Simple visual recognition of valve position• Easy to maintain and replace ball valves• Flow rates adjustable from low to high• Less wrist fatigue in turning valves to On/Off position

• Simple visual recognition of valve position• Flow rates adjustable from low to high

M-159TG-GLOBE SERIES Mixing Unit-Hose Stations


150PSI 10g/min 93°C

M-159TG-BALL SERIES Mixing Unit with Ball Valves

PREMIUM RANGE MIXING UNITSSAFETY MIXERS



13

PREMIUM RANGE MIXING UNITSSAFETY MIXERSM-200TS Thermostatically Controlled Mixing Unit

The Model M-200TS features rugged construction and superb quality for superior thermostatic control. The unit’s accurate and solid, liquid-filled thermostat allows you to set the exact output water temperature desired — from 80°F to 160°F. With its durable bronze body construction, the M-200TS valve features replaceable components that resist corrosion. Both the piston and liner are made of stainless steel material for long-lasting reliability. The unit also includes an integral shut-off valve. Backed by a one year warranty.

USA Headquarters 2801 Baglyos Circle Bethlehem, PA 18020

Phone: (484) 893-5080 Fax: (484) 893-5099 Toll Free: (877) STRAHMAN

www.strahmanvalves.com

SpecificationsMaximum water temperature 160°F/71°C

Maximum working pressure 125 psi

Maintains temperature to +/-3°F

½” low flow unit 5-7 gpm

¾” high flow unit 10-12 gpm

Single lever On/Off operation

Precise temperature control from 80°F/27°C to 160°F/71°C

Adjustable temperature limit stop for maximum safety

Replaceable components facilitate servicing

Senses and compensates for temperature or pressure fluctuations (up to a 50% drop in inlet supply pressure)

Please see reverse side for parts listing.

Last Updated: July, 2012

Shown: Bronze M-200TS unit; shown with premium hose assembly and M-70 Series nozzle.

Unit also available in chrome-plated.

Foreign deposits in supply lines can affect ball check durability.

FranceSavoie Hexapole, F-73420 Mery, France

Tel: 33 (0) 4 79 35 78 00Fax: 33 (0) 4 79 35 78 20

GermanyKirchstrasse 16, D-77855, Achern, Germany

Tel: 49 (0) 7841-6846530Fax: 49 (0) 7841-6846531

FLOW CAPACITIES SINGLE STAGE

FLOW OF WATER, GALLONS PER MINUTE

PR

ES

SU

RE

DR

OP,

PO

UN

DS

PE

R S

QU

AR

E IN

CH 70

60

504540

35

30

25

20

15

1098

7

65

1 2 3 4 5 6 7 8 9 10 15 20 30 35

1/2"

HIG

H

The Model M-200TS features rugged construction and superb quality for superior thermostatic control. The unit’s accurate and solid, liquid-filled thermostat allows you to set the exact output water temperature desired — from 80F to 160F. With its durable bronze body construction, the M-200TS valve features replaceable components that resist corrosion. Both the piston and liner are made of stainless steel material for long-lasting reliability. The unit also includes an integral shut-off valve. Backed by a one year warranty.

Shown: Bronze M-200TS unit; shown withpremium hose assembly and M-70 Series nozzle.

Unit also available in chrome-plated.

Note: Foreign deposits in supply lines can affect ball check durability.


125PSI 12GPM 71°C

Features

Order Part Number Material

M-200TS Bronze

• Single lever On/Off operation

• Precise temperature control from

• 80°F/27°C to 160°F/71°C

• Adjustable temperature limit stop

• For maximum safety

• Replaceable components facilitate servicing

• Senses and compensates for temperature or pressure fluctuations (up to a 50% drop in inlet supply pressure)

M-200TS Thermostatically Controlled Mixing Unit



14

PREMIUM RANGE MIXING UNITSSAFETY MIXERS

This unit produces hot water instantly from a steady supply of steam and cold water. All mixing units-hose stations in the M-5000TG/M-5700TG series are equipped with a dial type gauge that indicates the wash water’s exact temperature. Users can easily regulate the temperature by turning the unit’s steam and cold water valves. As an added safety measure, these units shut off their steam source automatically if the cold water supply falls below 50 psi for any reason. This prevents hazardous steam from exiting the unit and causing steam burns.

This unit should be shut off when not in use for extended periods of time.

It is recommended that a strainer and steam trap be used in conjunction with all of our steam mixing units.Foreign deposits in supply lines can affect ball check durability.Proper steam and water treatment is recommended to ensure proper performance and durability.This unit should be shut off when not in use for extended periods of time.

The M-5000 unit is available in bronze.* Steam pressure required at installation site to ensure proper operation of mixing unit.** Standard unit supplied.

Features

Order Part Number Steam Pressure Range

Water Pressure Range

GPM

M-5000 L** 80-95 lbs. 50-80 lbs. 5-7

M-5000 M 96-130 lbs. 50-80 lbs. 4½-6

M-5000 H 131-150 lbs. 50-80 lbs. 4½-6

M-5000TG Wall-Mounted SeriesMax. Pressure Max. Flow Max. Temperature

150PSI 7GPM 93°C



15

SAFETY MIXERS

PREMIUM RANGE MIXING UNITS

The Model M-5000TS lets you combine steam and cold water to produce hot water efficiently — without the safety concerns normally associated with steam use. Allowing for a maximum water temperature of 93°C, the automatic unit includes an easy-to-use temperature gauge that senses even slight variations to monitor water temperature accurately. The M-5000TS unit’s thermostatically designed safety shut-off valve prevents the unit from overheating, and the thermostat is hydraulically formed, liquid-filled bellows.

• Thermostatically designed safety shut-off prevents unit from overheating

• Unit automatically compensates for water pressure fluctuations to maintain desired water temperature

• Thermostat is hydraulically formed, liquid-filled bellows

• Removable parts for easy cleanup and inspection

It is recommended that a strainer and steam trap be used in conjunction with all of our steam mixing units.Foreign deposits in supply lines can affect ball check durability.Proper steam and water treatment is recommended to ensure proper performance and durability.This unit should be shut off when not in use for extended periods of time.

Features

M-5000TS Thermostatically Controlled Mixing UnitMax. Pressure Max. Temperature

150PSI 93°C

Image shown: Bronze M-5000TS with premium hose assembly and M-70

Series nozzle


OPTIONAL UPGRADE

Ask us about upgrading your mixer with HP-150 ergonomic gun range


16

HIGH PRESSURE

• Shockproof plastic housings

• Sturdy construction of Stainless Steel & brass

• Ergonomic construction

• Trigger operation minimizes fatigue

• Minimum load loss

• A sturdy and comfortable high-pressure shuto gun

• Compensating feature makes the trigger easy to pull and hold open, reducing operator fatigue

• New stainless steel body

• Improved lever arm for soer opening

Part Number YG5200

Maximum Volume 7.8 GPM

Maximum Pressure 5220 PSI

Maximum Temperature 300°F

Port Sizes: Inlet 3/8” NPT-F

Outlet 1/4” NPT-F

Dimensions 8.0” x 7.3” x 1.3”

Weight 1.8 lb.

Material Stainless Steel, Brass, Plastic, Buna-N, Teflon

Part Number YG1732

Maximum Volume 32.0 GPM

Rated Pressure 1740 PSI



Port Sizes: Inlet 1/2” G

Outlet 1/2” G

Dimensions 8.5” x 8.6” x 2”1.3”

Weight 2.75 lbs.

Material Stainless Steel, Brass, Plastic, Buna-N, Teflon

Features

Features

Specifications

Specifications

SPECIAL PURPOSE GUNS AND NOZZLES

YG5200 Pressure Compensating Spray Gun

YG1732 Heavy duty, High Flow Gun

• Strong brass structure

• Highly shock resistant ceramic seat and nozzle

• Oversized bearings for long life

• Can be used in any position

Part Number YR36K30 YR36K35 YR36K40 YR36K45 YR36K50 YR36K55 YR36K60 YR36K65 YR36K70 YR36K80

Size 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 8.0

Color Code White Brown Yellow Blue Purple Red Green Light blue Orange Silver

Minimum Pressure 1150 PSI



Port Sizes: Inlet 1/4” BSP-F

Weight 0.9 lbs.

Features Specifications

YG5200 Pressure Compensating Spray Gun



17

• Water-saving trigger nozzles• Heavy duty protective covers & bumpers• Bronze & stainless steel construction• Flat fan spray pattern• Trigger controlled• Optional swivel attachments available

• Optional Flat Spray or Cone Spray Nozzle Tips available on request.• Suitable for foam application. Enquire factory for more information.

• Apron• Boot• Food & Dairy • Utensils• General Cleaning• Meat, Seafood & Poultry


10 BAR 20ℓ/min 80°C 3/8” F x 1/4”F


SMART APPROVEDWATERMARK

MINI M-70LF Low Flow

4840-BA Boot/Apron Washdown Guns

MEDIUM PRESSURESPECIAL PURPOSE WASHDOWN TRIGGER GUNS

ECONOMY RANGE4840-BA BOOT/APRON WASHDOWN GUNS


OPTIONAL UPGRADE

Ask us about our low flow mini variable spray pattern trigger guns


18

City Water Pressure Foamers Airless Foamers

Boosted & High Water Pressure Foamers

Pressure Washer Foamers

Low Volume Foamers

Air Pump Foamers

Stainless Tank Foamers

Pump Fed Foamers

Pump Up Foamers

Acid/Corrosive Foamers Asphalt Release Foamers

CLEAN EFFICIENCY - SAVE WATER - SAVE CHEMICALS

• Compressed air & airless foamers• Sanitisers & foggers• Portable, fixed & entryway• Mixing solutions• Poly mixing blocks & stainless for maximum

corrosion resistance• Pump fed & metered units available for

correct dilution

• Food• Beverage• Dairy• Industry• Transport• Bio Security• Fixed & Portable

Chemical Application Types Applications

Can’t find what you need?Ask our team!

Foamers - Sanitiser - Mixers

LAFFERTY FOAMERS & SANITISERSSPECIAL PURPOSE WASHDOWN FOAMERS AND SANITISERS



19

Reel Tech - Your partner in Hose Reel Safety © 2015 Reel Tech Pty Ltd. All Rights Reserved

1800 REELIN [email protected] reeltec.com.au0800 669 953 [email protected] reeltec.co.nz

Milk Receival ProcessBulk milk hoseFoam applicationTanker bay washdownMilk floor - wet packaging

Bulk Transfer - AdditivesBulk oils

Bulk vitaminsBulk flavours

Milk - cream products

C.I.P Reels / Bulk Delivery / Custom ApplicationReduce large diameter hose handling injuries associated with manual C.I.P hose

Full stainless steel hub and swivelsGearbox fitted with safety torque arm

Optional remote control upgrade

Safe-R-Reel™Safer rewind speed for all spring reels

Ergonomic low-flow washdown trigger gun

HOSE SAFETY SOLUTIONSFOR THE FOOD INDUSTRY

Reel Tech’s patented ‘No chain/sprocket’ Safe-R-Reel™ gearbox

ensures a controlled rewind speed during rewind.

10 FACTS of Hose Reel Safety handbook

Request for a free copy today Hose reels in the workplace

Helping you identify the risks & responsibilities

REDUCE TRIP HAZARDS CONTROL REWIND SPEEDS REDUCE HOSE REPLACEMENT COSTS

SAFEHANDLING

WATERSAVING

PATENTED TECHNOLOGY

20

21



WASHDOWN REEL SOLUTIONS

SERIES 700Model No.

HOSE CAPACITY (m)

3/4” 1”

N818-23-24J 15 8

N818-25-26B 21 15

N822-25-26-10.5A 26 23

820-30-31-10.5A - 30

820-30-31-15.5A 30 -

SSN816-19-20-10.5J 8 5

SSN818-23-24-10.5J 15 8

SSN816-25-26-10.5B 18 11

SSN818-25-26-10.5B 21 15

SERIES N800 / 800¾” to 1” I.D. hose, Spring Rewind Reels

STAINLESS STEELSPRING REWIND

SSN700

GALVANISED SPRING REWIND

N700/700

REELS ALSO AVAILABLE WITH WASHDOWN HOSE PACKAGE

STAINLESS STEELSPRING REWIND

SSN700

GALVANISEDSPRING REWIND

N700/700

SERIES 700Model No.

HOSE CAPACITY (m)

3/8” ½”

N716-19-20J 15 15

N716-23-24J 20 20

718-25-26-15.5G 30 30

718-30-31-20D 46 36

SSN716-16-17-10.5J 11 11

†SSN716-17-18-8L 15 15

SSN716-19-20-10.5J 15 15

SSN716-23-24-15.5J 20 20

SSN716-23-24-15.5G 23 20

SSN716-25-26-15.5B 23 23

SSN718-25-26-15.5G 30 30

SPRING REWIND REELS

Available with optional Safe-R-Reel Rewind Speed Control System

21

SAFER HOSE HANDLING




SERIES 700Model No.

HOSE CAPACITY (m)

1/4” 3/8” 1/2” 5/8”

SS1514-17-18 53 8 23 15

SS1520-17-18 21 15 53 38

SS1526-17-18 152 23 61 61

SS1530-17-18 - 30 84 84

SS1536-17-18 - - 107 107

Series SS10001/4” or 3/8” I.D. hose, Manual Rewind Reels

• Lightweight, compact• Direct crank rewind permanently attached• Adjustable cam-lock brake standard• Optional pin lock available• Standard inlet: 90° stainless steel ball bearing swivel joint• 1/2” female NPT threads.• Standard outlet: 3/8” female NPT threads• Pressures to 3000 psi (207 bar)• Temperatures from +20°F to +400°F (-7°C to +204°C)• Consult factory for other pressures and temperatures.• 304 stainless steel construction

• Lightweight, compact reels designed for long lengths of hose

• Direct crank rewind is permanently attached• Cam-lock drag brake, spring actuated pin lock• Standard inlet: 90° stainless steel ball bearing swivel joint

1/2” female NPT threads• Standard outlet: 1/2” female NPT threads• Rollers and roller mounting brackets are accessory items.

Specify roller position• Pressures to 3000 psi (207 bar)• Temperatures from +20°F to +400°F (-7°C to +204°C)• • Consult factory for other pressures and temperatures.• • Consult factory for power version.• • 304 stainless steel construction.

SERIES SS15001/4” through 5/8” I.D. hose, Manual Rewind Reels

STAINLESS STEEL MANUAL REWINDSS1500

STAINLESS STEEL MANUAL REWINDSS1500

SERIES 700Model No.

HOSE CAPACITY (m)

1/4” 3/8”

SS1014-14-16 31 23

SS1016-14-16 46 31

SS1020-14-16 76 15

WASHDOWN REEL SOLUTIONS

MANUAL REWIND REELS

22



Hose ID 1 Bar 2 Bar 4 Bar 6 Bar 8 Bar 10 Bar½” 109 155 218 267 308 346

¾” 239 338 478 585 676 757

1” 348 491 696 852 982 1098

Water loss* in lpm. via Open Hose/Pipe Bar (G) pressure

16110301_WDG

WATER SAVING NOZZLES TO SUIT EVERY APPLICATION

save water save money save time

VICTORIA, AUSTRALIA27 Shearson Cres

Mentone 3191www.sprayingsolutions.com.au

[email protected] NOZZLE

HAMILTON, NEW ZEALAND532C Grey Street

Hamilton East 3216www.sprayingsolutions.co.nz

[email protected] NOZZLE

DON’T WASH YOUR MONEY DOWN THE DRAINCONSIDER HOW MUCH WATER IS SAVED WITH OUR NOZZLES

This table shows the wasted flow from various hose sizes with no trigger gun attached

Date post:	29-Jun-2018
Category:	Documents
Upload:	buitram
View:	220 times
Download:	0 times

TOTAL WASHDOWN SOLUTIONS · 10 BAR 35l/min 93°C Features ... Always consult factory for product...

Documents