OPERATION MANUAL

SC-TLSA01

Touch Lamina

Part of the

Appendix I:1. Introduction to Silux Home®

2. Introduction to the Touch Lamina®

3. Applications4. Electrical Specifications5. Instructions I. Installing the Touch Lamina®

II. Using external power supply with the Touch Lamina®

III. Replacing the CR2032 3V batteriesIV. How to pair with Silux Home® DevicesV. How to delete paired Silux Home® devicesVI. How to control a Silux Home® deviceVII. Hubcentric topologyVIII. What is a TriggerIX. Factory Reset 6. Versions and changes7. More Silux Home® automation products Appendix II: 1. Troubleshooting2. WarrantyI. What this warranty coversII. What period does this warranty coverIII. What Silux Home® will do to correct any problemsIV. What is not covered by this warranty 3. Support4. Disclaimer of Liability

Appendix I:1. Introduction to Silux Home®

Touch Lamina ®

PLEASE NOTE: You are not able to connect directly to the Touch Lamina®.

You will be required to connect directly to the Intellihub® to ensure you can control all devices via the Intellihub® and Silux Home® app.

The idea behind the Silux Home® automation series is to have a fully automated lifestyle. No longer will you need to push a button to switch on appliances or lights; it will simply be switched on for you with motion, schedules and scenes. You can schedule your geyser or water heater to turn on and set it to the temperature you wish. Your irrigation system can be automated, and so much more can be controlled, the sky is the limit, and all this under one app, all controlled from one place. You can create scenes or even control a couple of appliances from the convenience of your living room or anywhere across the world using any smart device running Android or iOS. At Silux Home®, it was our vision to create automation affordable to everyone without compromising quality and with unlimited potential. Our devices are specially designed to make it as easy as possible to install with easy usability and a wide range of applications. With encrypted data control, you are also protected from the outside world, providing you with a peace of mind. We have thought of everything. What are you waiting for? Install Silux Home® and let us help you control your world safely, securely, and efficiently.

2. Introduction to the Touch Lamina®

The Touch Lamina® is one of the many useful and wonderful products that form part of the Silux Home® automation series. The purpose of this product is to control your lights or any other Silux Home® product with a tap on the touch plate. *Please Note: There are two variants of this product. The Touch Lamina Altus® and the Touch Lamina Artatus®.Warning: Please follow all safety precautions when installing this product. It is always recommended to use a qualified electrician. Silux Home ® and its distributors and resellers cannot be held responsible for any injury or death. Device1

Device2

Device3

Device4

Intelli Hub® Device1

3. ApplicationThe Touch Lamina® was designed to control any other Silux ® product with the touch of a button. All you need to do is pair the Touch Lamina® to your Silux ® product you wish to control.

4. Electrical SpecificationsOperating Batteries: x2 CR2032 3V BatteriesExternal Power Supply: Input: 110V AC – 230V AC

Output: 5V /DCOperating Temperatures: -5°C – 60°C

Touch Lamina® Layout

5. InstructionsI. Installing the Touch Lamina®:1. Open the plastics from the middle hole in the bottom of the Touch Lamina® with a small flat screw driver.2.1.1 If using screws which are supplied, use the back plastic to mark with a pencil or pen where your holes are going to be.2.1.2 Drill holes in the wall, push plugs in and mount the backside plastic against the wall using the screws supplied. 2.2.1 If using the double sided tape, also supplied, remove the first liner of the tape, apply the tape to the backside plastics, let the adhesive set before you try and remove the second liner.2.2.2 Place the back side firmly against the wall, where you would like your Touch Plate to be positioned and let it set.

3. Pull out the tags from beneath the batteries. The Touch Lamina® will now be powered on. Please refer to “How to pair with Silux Home® devices”.4. Clip the Touch Lamina® cover back over the plastic on the wall to mount it.

External Power wire hole

MountingHole

MountingHole

Exte

rnal

Sup

ply

Con

nect

ion Battery Holder

Battery HolderCR2032

External Power hole

MountingHole

MountingHole

Adhesive

Liner CR2032

CR2032

Battery

Battery

Pull out Tag

Pull out Tag

2.22.1

1

3

II. Using the external power supply with the Touch Lamina®:There will be a Silux Home® external power supply included with the package. You have the choice to install it. This will ensure that the Touch Lamina® never runs flat.There is no need to remove the batteries if you are using external power, however it is advisable. 1. Please make sure the power is off before supplying 110V AC –230V AC to the external power supply.2. Wire the + position to the Red wire and the - position to the Black wire.3. Open the plastics from the middle hole in the bottom of theTouch Lamina® with a small flat screw driver.4. Push the connector through the back plastic and mount theback plastic against the wall. Please refer to step 2 of “Installing the Touch Lamina®”.5. Plug the connector into the 5V socket on the Touch Lamina®.There is only 1 way to insert in the power connector, do not use force.6. It is now safe to power the 110V AC – 230V AC back on again. The Touch Lamina® will now be powered on. Please refer to “How to pair with Silux Home® Devices”.7. Clip the Touch Lamina® cover back over the plastics on the wall to mount it.

III. Replacing the CR2032 3V batteries:There will be two CR2032 batteries supplied with the product. The batteries will have a life span of up to 1-2 years, depending on how often the Touch Lamina® is used. 1. Open the plastics from the middle hole in the bottom of the Touch Lamina® with a small flat screw driver.2. Slide out the old CR2032 batteries and replace it with the new CR2032 batteries. The Touch Lamina® will now be powered on.3. Clip the Touch Lamina® cover back over the plastics on the wall to mount it.*Please Note: It’s not necessary to pair the Silux Home® devices again after replacing the batteries

CR2032

CR2032

Battery

Battery

Pull out Tag

Pull out Tag

4OFF

1

2 3

ON

5

IV. How to pair with Silux Home® Devices:NOTE: There is 2 types of Pairing you can choose to use, namely;1. Network Pairing - This enables you to connect a button to the Silux Home® Network, to control any device on the Silux Home® Network, and to be used with more than one device.Use this option if you wish to control a device which is located far away from your touch lamina and to make use of the intelligence of the network. Or if you wish to control more than one device at a time, or if you would like your button governed by times or duration.2. Direct Pairing - Direct pairing is used when you wish to control a single in range device with a single button, namely using the Touch Lamina® in the Lounge only to control lights in the lounge.

Starting Pairing:1. Locate the teach button, on the bottom right corner of the inside of your Touch Lamina®.2. Press the teach button as follows; 2.1 Press the teach button once only to start pairing to the Network Pairing Mode. (The teach light was flash slowly next to the button)2.2 Press the teach button twice to start pairing in Direct Pairing Mode (The teach light was flash fast next to the button)

Pairing Devices:Direct Pairing Mode1. Press the teach button on the Silux Home® device you wish to control, which should be in the same room as the Touch Lamina®.2. Press the button on the front of the Touch Lamina® you wish to pair. The teach light will stay solid on.3. On the Touch Lamina® the teach light will start to flicker once paired and stop after 10 seconds.4. The teaching of that button on the front plate of the Touch Lamina® is complete.5. To program another button on the Touch Lamina®, repeat the above process.

Network Pairing ModeThis requires you to discover the Touch Lamina® from the Android / IOS App.1. Once the teach light stops flashing, all the buttons will be network paired.2. Tap a button on the front of the Touch Lamina® to ensure it is discoverable on the network. 3. Open your Silux Home® App.4. Tap on the “Add device” button.5. Look for the Touch Lamina® in the list of devices, by its serial number.(Located on the sticker on the underside of the Touch Lamina® plastics, or on the Touch Lamina® packaging)6. Tap on the “Add” button and fill in the required details.7. Press "save" and the Touch Lamina® will be available to link to Silux Home® devices or schedules. *Please note: After pressing the teach button you have 30 seconds to pair the devices.

V. How to delete (unpair) paired Silux Home® devices:To delete a Silux Home® device from the Touch Lamina® both the Touch Lamina® and device needs to be on.1. Press the teach button on the Silux Home® device you wish to unpair.2. Press the teach button on the Touch Lamina® three times. The light will start flashing.3. Press the button on the Touch Lamina® front panel you wish to unpair or delete. Once pressed, the teach light will go solid. 4. The light on the Touch Lamina® will begin to flash again.5. You can then tap the next button on the front panel of the Touch Lamina® you wish to unpair / delete, and repeat the above process.6. Once both lights have stopped flickering, your device will be unpaired.

VI. How to control a Silux Home® device:Once the Touch Lamina® is paired to a device, the device can be controlled by touching a button previously paired. The Touch Lamina® can also dim a device by tapping and holding the corresponding button. You are able to pair up to 6 buttons to one device. This can be done by different combinations ranging from 6 buttons paired onto one Touch Lamina® or 1 button paired onto 6 different Touch Lamina®’s.*Please note: The Collector® controlling the device hase to be the Collector Dimmable® to be able to dim.

TV

TV

Water Heater

IntelliHub

Tier 1 Tier 2 Tier 3

VII. Hubcentric topology.Your Silux Home® automation system uses a technology known as Hubcentric topology. This means that all your devices communicate with each other. In larger areas, it is possible that a device might be too far from the IntellihHub® to communicate reliably. Your IntelliHub® will then use other devices which are more in range to create a more reliable connection to the out of range device. The distance at which your IntelliHub® can communicate with your Silux Home® devices varies according to the environment. The IntelliHub® has been developed to achieve a distance of 20m, however, thick walls, large electrical appliances and long distances are 3 factors that can limit communication with Silux Home® devices. Use the “diagnostics” section of your Silux Home® app to diagnose any issues you might be experiencing with communication on your Silux Home® Network.

VIII. What is a Trigger?:A ‘Trigger’ is a device used to set off events. These can be as simple as switching a single device on or off, or as complex as switching all devices in a room on for a specified amount of time. Think of it as a remote control. This device will only be on for a brief period of time while sending the command to your Silux Home® device and will go back into sleep mode if the command was successful. Because this device will be in sleep mode, most of the time, it doesn’t form part of the intercommunication system. Please see the diagram above for the intercommunication system.*Please Note: The Seeker® and Touch Lamina® are examples of triggers.

IX. Factory Reset:This function will remove all paired devices and restore the settings to the original state. Press and hold the Teach button for 5 seconds on the Seeker®, the light will flash 3 times. Your device will now be restored to its default state.

6. Versions and changesCurrently, there are two variants of this product. The Touch Lamina Altus® (Large) and The Touch Lamina Artatus® (Small).The Touch Lamina® model no: SC-SK01User Manual Revision No: 1.2This user manual may be outdated. Please visit our website at www.siluxhome.com for updated models & versions, updated user manuals, future products and to see the rest of the wonderful products Silux Home® has to offer.

7. More Silux ® automation productsProduct HubRelay Module Dry contact Relay Module Relay Module Dimmable Repeater/Range Extender PIR SensorTouch Plate EU/SA Touch Plate USA PlugSmoke Detector Water Heater / Geyser High Power Appliances IrrigationGas leak Detector Garage Tilt

Silux Home® Name IntelliHub®

Collector®

Collector Relay®

Collector Dimmable®

Silux RPT®

Seeker®

Touch Lamina Altus®

Touch Lamina Artatus®

Electrifier®

Halitus®

Thermo Stabilizer®

Tolleno®

Saturizer®

Garseous®

Tylten Pro® Water & Temperature Sensor/Puk Elements®

Security Module Armaduras®

*Please note: Not all the products on this list are available yet, but will become available in the near future. This list can change at any time. Please refer to www.siluxhome.com for new and discontinued products. New products will be added in time to come as well.

Appendix II1. TroubleshootingPlease visit our website at www. .com/FAQ for detailed list of all the Frequently Asked Questions.• Ensure that the pull out tags underneath the batteries are removed. • Ensure that the batteries are not flat.• When using the Silux Home® external power supply make sure the

light on the external power supply is on and the 5V connector is correctly connected onto the Touch Lamina®.

• Ensure that the green light on the front of the Touch Laminaswitches on and off when touching a button.

• Ensure that the Touch Lamina® light flashes when pressing the teach button.

• Ensure that the Touch Lamina® is correctly paired to your Silux Home® Device.

• There is also online videos which can be viewed to assist you withthe installation process at www. .com

2. WarrantyI. What this warranty covers:Silux Home® warrants to the original purchaser of this Silux Home®

product that the product shall be free from defects in design, assembly, material, or workmanship under normal use and operation.Silux Home®‘s sole and exclusive obligation under the foregoing warranty shall be to repair or replace, at its option, any defective product that fails during the warranty period. The expense of removal and reinstallation of any item is not included in this warranty.WARNING: Silux Home® and its distributors and resellers cannot be held responsible for any damages this product might have caused including 3rd party damages.

II. What period does this warranty cover:Silux Home® warrants this product for 12 months.

III. What Silux Home® will do to correct any problems:Silux Home® will repair or replace, at its option, any defective product free of charge (except for shipping charges for this product). Silux Home® reserves the right to discontinue any of its products without notice and disclaims any limited warranty to repair or replace any such discontinued products.

IV. What is not covered by this warrantyUpon claiming this warranty, all above warranties are null and void if the purchased Silux Home® product is not returned for an authorized inspection, at the sole expense of the purchaser, or if Silux Home® determines that the Silux Home® product has been improperly installed, altered in any way, or opened/tampered with. The Silux Home® product warranty does not protect against instances of uncontrollable natural disasters such as flood, lightning, earthquake, war, vandalism, theft, normal use wear and tear, erosion, depletion, obsolescence, physical damage, water damage, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration.

3. SupportPlease visit our website at www.siluxhome.com for any other support, products, future products, and updated user manuals.

4. Disclaimer of LiabilityPlease read this user manual thoroughly before using the IntelliHub®. Follow all safety precautions when installing this product. It is always recommended to use a qualified electrician. Under no circumstances shall Silux Home® or its associates be liable for any direct, indirect, incidental, special or consequential damage that results from the use of or inability to use the Silux Home® products. By using the IntelliHub® or any other Silux Home® Automation products, you expressly agree that the use of these products are at own risk. Neither Silux Home® nor its affiliates, subsidiaries, or designees nor each of their respective officers, directors, employees, agents, third party content providers, designers, contractors, distributors, merchants, sponsors or licensors can be held responsible for any injury, death or damages this product might have caused.

Download Our Free Silux Home® App

Google Play App Store

Available on

or in the User Manual of the product under the Warranty section.

SILUX WARRANTY CARD The full text of warranty is available on our website

www.siluxhome.com

Please take a moment to fill out your information

.

Please return the warranty card with defective product and the sales receipt as proof of the date purchase.

Warranty cannot be carried out without it.

Product:

Model No:

Serial No:

Date of Purchase:

Name:

Surname:

E-Mail Address:

Phone No: +

Address:

Country:

D D M M Y E A R

Cut Here

VIII. What is a Trigger?:A ‘Trigger’ is a device used to set off events. These can be as simple as switching a single device on or off, or as complex as switching all devices in a room on for a specified amount of time. Think of it as a remote control. This device will only be on for a brief period of time while sending the command to your Silux Control® device and will go back into sleep mode if the command was successful. Because this device will be in sleep mode, most of the time, it doesn’t form part of the intercommunication system. Please see the diagram above for the intercommunication system.*Please Note: The Seeker® and Touch Lamina® are examples of triggers.

IX. Factory Reset:This function will remove all paired devices and restore the settings to the original state. Press and hold the Teach button for 5 seconds on the Seeker®, the light will flash 3 times. Your device will now be restored to its default state.