Date post: | 18-Jan-2016 |
Category: |
Documents |
Upload: | tamsin-lee |
View: | 215 times |
Download: | 0 times |
Touch screen function manual
Right & leftscroll key
Room selecting key, Maximal quantity 50.
Controlling Target icon
Room background
image
brightness adjustment button
Scene selection
System setting
Intelligent Control Terminal –Touch screen setting
Setting interface
Click Setting button
Key in password and confirm, (default
Password: 000000)
Setting interface
Timer setup
System setup
Room setting
Intelligent Control Terminal –Touch screen setting
Touch screen IP address setting
Step 1 Step 2
Double click
Step 3 Step 4
① Click IP address
② Bring up the soft keyboard, enter the value you want to modify(Under the
computer subnet.)
③ Click OK
Restart after quit and power off
Touch screen IP address setting
If touch screen software do not run automatically after restart, then please run this command :
“My computer/NandFlash/Touch1/ Touch.exe” to run touch screen software, and select “Auto-start ”mode in system setting.
Make the IP address come into effect by click HANG 。
Touch screen programming
1 、 In the menu bar select "touch screen", click the touch screen icon in the drop-down menu
Touc
hSc
reen
2 、 Select file and open the picture of the new room (the best size of the picture 624*377)
Touc
hSc
reen
3 、 Select document
4 、 Open
Touc
hSc
reen
5 、 Right click to the new added room for edit a new room name. 。
Touc
hSc
reen
6 、 1). Click to the Icon that you want to add2). Add the Icon by click to the background image 3). Click black to the icon to cancel adding operation
7 、 Drag the Icon to the place you want.
8 、 You could select Set the attribute of the current object or Set the attribute of all the objects of the current room by right click the icon
Touc
hSc
reen
9 、 Setting the selected icon remarks, channel, start time and end time.
10 、 Save setting.
Touc
hSc
reen
11 、 After set up for each Icon, move the cursor to the icon, and you can see all detail settings.
12 、 Click “Scene” button , and setting scene information
Touc
hSc
reen
Touc
hSc
reen
Tip : The relationship between "the current room scenes information" and touch screen display shown in red frame figure.
Tip : For buttons in the right screen, click to open, then is off, remarks can be set separately 。
14 、 Set each key type, select "Scene on" (only the implementation of target on), " scene off " (only the implementation of target off), the scene on / off (executable target on and off , that is, click to open, then click off).
13 、 Click “Type” button
15 、 Save
Touc
hSc
reen
17 、 Set "On" remarks and "Off" remarks for each button. Note: You must enter all six buttons "on" and "off" remarks, or it can not be saved. In addition, when the key type is "scene On", there only display the "On" remarks, "Off" remarks can not be displayed.
16 、 Click “Remarks” Button
Touc
hSc
reen
Add control objective for each key, please note that, target can be in room target (ie add all the icons target of the room background image, the type of target only for the "Channel"), or target outside this room (External, such as dimming modules, switch modules and other equipment that have been programmed (scene or sequence) the target information).
Touc
hSc
reen
18 、 Add
19 、 Select control target of the room,.
20 、 Click“OK”
Adding room target
Touc
hSc
reen
21 、 Click on "Edit" to set the parameters for each target
Tip : right-click to delete items
Touc
hSc
reen
22 、 Setting parameters for each channel, such as brightness, running time.
23 、 Save
Touc
hSc
reen
24 、 Click to add
Add target for other room
25 、 Input target number, then add.
Touc
hSc
reen
25 、 Edit parameters for each target 。
26 、 Setup target parameters , such as: subnet ID , equipment ID, type and so on.
27 、 Save
Touc
hSc
reen
28 、 Quit setting
Touc
hSc
reen
29 、 Upload to touch screen.
Touc
hSc
reen
30 、 Select touch screen IP address, you can setup a new one if can not found in the list.
Touc
hSc
reen
31 、 Click the "Connect / Disconnect", when connection is built, means uploading can be proceeded.
32 、 Select the room to upload
Touc
hSc
reen
33. Start uploading
34 、 Confirm to finish uploading.