TouchdownDesigned by Ramona Rosewww.ramonarose.net
Finished quilt measures 53-1/2” x 44-1/2”
Featuring
Panel A- Trim the Football Field panel to 44-1/2” x 24-3/4”.
Fabric B- Cut two strips 4-1/2” x WOF (Width of Fabric), then subcut into two strips 4-1/2 x 32-3/4”.- Cut two strips 6-1/2” x WOF, then subcut into two strips 6-1/2” x 26-1/2”.
Fabric C- Cut two strips 6-1/2” x WOF, then subcut into four rectangles 6-1/2” x 13-1/2”.
Fabric D- Cut two strips 4-1/2” x WOF.
page 2
Color Fabric Name/SKU Yardage
Panel A
C
B
SRK-14613-47 GRASS
SRK-14614-7 GREEN
SRK-14615-7 GREEN 1 Panel
2/3 yard
1/2 yard
Color Fabric Name/SKU Yardage
You will also need: 1/2 yard of Binding fabric, and 2-1/2 yards of Backing fabric and Batting.
Notes Before You Begin
- Please read through all of the instructions before beginning.- All of the seam allowances are 1/4” unless otherwise noted. - WOF is “Width of Fabric” which is 40” minimum, unless otherwise noted.- Press all seam allowances open after each seam is sewn, unless otherwise noted.- Remember to measure twice and cut once!
For individual use only - Not for resale
Copyright 2014, Robert Kaufman
Cutting Instructions
SRK-14630-9 NAVYD 1/4 yard
Fabric and Supplies Needed
Quilt Assembly Instructions
1. Sew the two Fabric D strips lengthwise to the top and bottom of Panel A. Once you have sewn and pressed your seams, true-up Fabric D to be the same length as Panel A.
Note: Your strips should be just long enough to fit on your panel. If you find they aren’t, you may either trim down the sides of the panel to match, or add a small length to your strips.
2. Sew the two Fabric B 4-1/2” x 32-3/4” strips to the short sides of Panel A.
3. Sew two Fabric C rectangles, short sides together, to a Fabric B 6-1/2” x 26-1/2” rectangle to make Border C/B/C. Repeat to make a second border.
4. Sew the borders lengthwise to the top and bottom of the quilt top.
Baste, quilt, bind, and enjoy!
C
B
B B
B
page 3
D
D
C CB
B B
Border C/B/C
Panel A