Page 1
Corporate Headquarters
301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325
www.asset-sales.com [email protected]
Asset Sales (Canada) Inc.
4310 Prospect Road
Bayside, Nova Scotia, Canada B3Z1L5
Tel 902.852.5331 Fax 704.821.4325
[email protected]
Asset Sales, Inc.
MARQUARDT ENGINEERING GEAR, LATE MODEL CNC & GRINDING
11118 EAST MAIN STREET – HUNTLEY, IL 60142
THURSDAY, JULY 12TH @ 10:00 A.M. CDT Inspection: WEDNESDAY, JULY 11TH FROM 8:00 A.M. – 4:00 P.M. CDT
MFG DATE
OR SPEC
MFG
DATE OR
SPEC
MFG
DATE OR
SPEC
European Headquarters
Unit 7, Branxholme Industrial Estate, Bradford Road,
Brighouse, West Yorkshire, HD6 4EA, England, UK
Tel 1484.401.906 Fax 1484.715.327
[email protected]
EXCELLENT
40”
SWING
2006 2006
2007
2005
TOYODA AWEA MODEL BM1400 VERTICAL MACHINING CENTER
36” FELLOWS PFAUTER MODEL P900 GEAR HOBBER CHMER MODEL CW-643S CNC WIRE EDM
FORTUNE MODEL VTURN-36 CNC TURNING CENTER
2007 2001
2007
2004
VERTICAL MACHINING CENTERS TOYODA Awea Model BM1400 Vertical Machining Center with 31 ½ x 59” Table, 55” X-Axis Travel, 31.5”
Y-Axis, 27.6” Z-Axis, # 50 Taper Spindle Speeds to 6,000 RPM, High Pressure Thru Spindle Coolant, 30
ATC, Dual Chip Augers, Full Enclosure, Yuasa DMNC-28001 4th Axis (to be sold separate), FANUC 18i-
MB CNC Pendant Control with Remote Pulse Generator, mfg.2007, sn:7024
TOYODA Awea Model BM1400 Vertical Machining Center with 31 ½ x 59” Table, 55” X-Axis Travel, 31.5”
Y-Axis, 27.6” Z-Axis, # 50 Taper Spindle Speeds to 6,000 RPM, High Pressure Thru Spindle Coolant, 30
ATC, Dual Chip Augers, Full Enclosure, Yuasa DMNC-28001 4th Axis (to be sold separate), FANUC 18i-
MB CNC Pendant Control with Remote Pulse Generator, mfg.2006, sn:6002
KITAMURA Model MyCenter 4 Vertical Machining Center with 22 ½” x 55” Table, 44” X-Axis Travel, 22” Y-
Axis, 22” Z-Axis, # 40 Taper Speeds to 10,000 RPM, 30 ATC, Chip Conveyor, Full Enclosure, Yasnac
CNC Pendant Control, mfg.1992, sn:30574
CNC LATHES & TURNING CENTERS FORTUNE Model VTurn-36 CNC Turning Center with 15” 3-Jaw Power Chuck, 25.59” Maximum Swing
Over Bed, 21.65” Maximum Turning Diameter, 50.79” Center Distance, 49.41” Z-Axis Travel, Spindle
Speeds to 2500 RPM, 4.13” Bore, 10 Station Turret, Tailstock, Chip Conveyor, FANUC OT CNC Control,
mfg.2001, sn:MD-1441
FORTUNE Model VTurnII-26 CNC Turning Center with 10” 3-Jaw Power Chuck, 20.47” Maximum Swing
Over Bed, 14.96” Maximum Turning Diameter, 25” Center Distance, 24” Z-Axis Travel, Spindle Speeds to
3500 RPM, 3.43” Bore, 10 Station Turret, Tailstock, Chip Conveyor, FANUC Oi-TC CNC Control,
mfg.2003, sn:MY-1264
DAEWOO Model Pan20 CNC Flat Bed Lathe with 12” 3-Jaw Power Chuck, 20.5” Swing x 59.1” Center
Distance, 6 Position Front Turret, Rear 4-Way Tool Post, Tailstock, Enclosure, FANUC 6T CNC Control,
sn:190037
DAEWOO Model Pan20 CNC Flat Bed Lathe with 10” 3-Jaw Power Chuck, 20.5” Swing x 59.1” Center
Distance, 6 Position Front Turret, Rear 4-Way Tool Post, Tailstock, Enclosure, FANUC 10T CNC Control,
sn:190129
CNC WIRE EDM CHMER Model CW-643S CNC Wire EDM with 41” x 34” x 21” Tank Size, 23.6” X-Axis Travel, 15.7” Y-
Axis, 11.8” Z-Axis, 37.4” x 27.6” x 116” Maximum Workpiece, Auto Threading, Chiller, 5 Axis CNC Control,
mfg.2004, sn:G402079
GRINDERS CINCINNATI 10” Swing x 72” Centers Plain Cylindrical Grinder Model 10R with 3” Wide Grinding Wheel,
Variable Speed Workhead, Tailstock, Coolant, sn:3531215V-2
HEALD Model 272 Toolroom Internal Grinder with 12” 3-Jaw Chuck, Red Head Spindle, 22” Swing Over
Table, Coolant, sn:34473
HEALD Model 72A Internal Grinder with 15” 3-Jaw Chuck, 18” Swing, Swing Down Dresser, Red Head
Spindle, Coolant, sn:20-53
GARDNER Model 77A Double Disc Grinder
ARTER 10” Horizontal Rotary Surface Grinder with 10” Magnetic Chuck, 16” Wheel, Coolant, sn:1862
MATTISON 14” x 48” Hydraulic Surface Grinder with 14” x 48” Electromagnetic Chuck, Overhead Wheel
Dresser, 16” x 3” Wide Grinding Wheel, 15HP , sn:13695
REID 6” x 18” Hydraulic Surface Grinder Model 618H with 6” x 18” Permanent Magnetic Chuck, 2-Axis
Sony DRO, Coolant, sn:14152
BROWN & SHARPE 8” x 24” Surface Grinder with Permanent Magnetic Chuck, Coolant
SHINKO-BURTON 6” x 15” Surface Grinder Model 615 with Permanent Magnetic Chuck, Coolant, sn:4408
Tool & Cutter Grinders, Double End Pedestal & Bench Grinders, ETC.
MILLING MACHINES BRIDGEPORT Vertical Milling Machine with 9” x 48” Power Feed Table, R-8 Spindle Speeds Variable to
4200 RPM, Acu-Rite Mill Mate 2-Axis DRO, sn:BR263899
BRIDGEPORT Vertical Milling Machine with 9” x 42” Table, Riser, R-8 Spindle Speeds Variable, Sony 2-
Axis DRO, sn:163476
WELLS Index Vertical Milling Machine Model 837 with 10” x 42” Table, 3 HP R-8 Spindle, Variable
Speeds, Power Table Feed, Anilam Wizard 2-Axis DRO, sn:1706
MSC Vertical Milling Machine with 9” x 49” Table, 2 HP R-8 Spindle, Variable Speeds, Anilam Wizard 2-
Axis DRO, sn:771525
ENCO Vertical Milling Machine with 9” x 42” Table, R-8 Spindle Speeds Variable, 2-Axis DRO, sn:503283
CINCINNATI No.3 Vertical Milling Machine with 15” x 62” Table, No.50 Taper Spindle, sn:2A3VIK-106
CINCINNATI No.2 Horizontal Milling Machine with 12” x 52” Table, No.50 Taper Spindle, Over Arm &
Support, Chip Pan, sn:4A2P1L-141
ENGINE LATHE VICTOR 20/24” x 80” Gab Bed Engine Lathe Model 2080G with, 10” 3-Jaw Chuck, Chuck Guard, 10 HP
Spindle Speeds 16-1800 RPM, 2 ¼” Spindle Bore, Steady Rest, sn:710681
ACRA TURN 13”/18” x 40” Gap Bed Engine Lathe Model 1340 with 6” 3-Jaw Chuck, Spindle Speeds to
______, 1 ¾” Spindle Bore, Tool Post, sn:52567
TURRET LATHE WARNER SWASEY No.2A Model M510 Turret Lathe with 15” 3-Jaw Chuck, 3 ¾ Spindle Bore, 5 Position
Turret with Tools, sn:328296
KEYSEATER MITTS & MERRILL No.4 Keyseater with 2.5” Maximum Keyway Width, Table, sn:09701
HANSFORD DAVIS Model _______ Keyseater with 31” x 20” T-Slot Table, Over Arm, sn:______
DAVIS No.4 Keyseater, sn:4-1164
GEAR SHAPER (2) FELLOWS Model 6A Gear Shapers, 20” Diameter Capacity, (1) with Riser, sn:615A; 61A
GEAR HOBBERS 36” FELLOW PFAUTER Model P900 Gear Hobber with 36” Table Diameter, Approximately 19-3/4” Gear
Width, Universal Hob Head Two Cut Worm Cycle, Tailstock & Enclosure, mfg.1971, sn:23582
GOULD & EBERHARDT Model 618-5 Gear Hobber with 16” Table, Riser, Universal Hob Head, sn:248A9
GOULD & EBERHARDT Gear Hobber with 14” Table, sn:1787A
GOULD & EBERHARDT Model 12H 10” Diameter Gear Hobber with Tailstock, 1 Thread Worm, 36 Tooth
Gear, Change Gears, sn:4700A4
GOULD & EBERHARDT Reord 30” Gear Hobber with 30” Table, Tailstock & Support, sn:_____
HORIZONTAL GEAR HOBBERS (2) BARBER COLMAN Model 16-36 Multicycle Gear Hobbers with16” Maximum Work Diameter, 36”
Maximum Travel of Hob Carriage, Dwell Timer, Automatic Hob Shift, Tailstock, Single & 4 Thread Index
Worms, sn:4402; 4573
(3) BARBER COLMAN Type A Gear Hobbers with Double & Single Thread Index Worm, 16’ Maximum
Work Diameter, 17” Travel of Hob Carriage, Tail Stock, sn:633; 2253 & 973
HOB SHARPENER BARBER COLMAN No.4-4 Hob Sharpener with 4” Diameter Capacity x 4” Work Length, 15” Maximum
Center Distance, sn:964
HORIZONTAL BAND SAWS HEM Model H105-LA 16” x 20” Automatic Horizontal Band Saw with Auto –Index Feed, Hydraulic Vises,
7½ HP, 1 ¼” Blade, PLC Control, Chip Auger, 22” W x 10 ½’ Conveyor, Discharge Table, sn:838103
WELLS Model 1016 Miter Cutting Horizontal Band Saw with 10” x 16” Capacity, Infeeding Conveyor &
Discharge Table, sn:1238
ASSORTED PRESSES & DRILLS 12 ½ Ton H-Frame Hydraulic Press with 23” Between Uprights, Adjustable Rail
DENISON 6 Ton Hydraulic Press with Stand Model M6C04A12A11, sn:1997
FAMCO No.5 Floor Standing Arbor Press
FAMCO No.2 Bench Type Arbor Press
DELTA 18” 2 Spindle Drill Press with 23 ½ x 36” Table Size, 2 MT
CUMMINS Model C117-F Floor Type Drill Press
ROCKWELL & DELTA Bench Type Drill Presses
AIR COMPRESSORS 10 HP INGERSOLL-RAND Model SSR-P10 Rotary Screw Air Compressor with 35 CFM, Enclosure,
sn:A02071V95138
5 HP GARDNER DENVER Reciprocating Air Compressor
DONALDSON Model VF50 Air Dryer, sn:V1CCNE1279
BRIDGE CRANE & HOIST 2 Ton x 40’ Wide DEMAG Top Running Overhead Bridge Crane System with Pendant Control,
Approximately 175’ Long Runway & Uprights
½ Ton DEMAG x 25’ Wide Crane with 50’ Runway, Pendant
Other ½ - 1 Ton Electric Hoists & Crane Systems
ROLLING & MATERIAL HANDLING KOMATSU 5000lb Propane Forklift Model FG25C-12 with 2 Stage Mast, Pneumatic Tires, 48” Forks,
mfg.1997, sn:502631A
MARKLIFT Electric Scissor /Manlift Model CH20NEP with 28” x 98” Platform, 800lb Capacity x 20’
Maximum Platform Height, mfg._______, sn:25422
MISCELLANEOUS Numerous Sections of Pallet Racking, Change Gears, Risers, Hobbs, Assorted Gear Manufacturing
Equipment, Miscellaneous Steel, Perishable Tooling, #40 & #50 Taper Toolholders, 4th Axis, Vises, Lathe
& Mill Tooling, EDM Tooling, LINCOLN 225 AMP Welder, EVERETT 8” Abrasive Chop Saw, DELTA 4”
Belt Sander, Pedestal Grinders, Cabinetry, Office Furniture, Thermolyne Series 85Model F-A1740-15
Electric Oven, Etc….
Page 2
2
YUASA 4TH AXIS
AUCTION SALE DATE & TIME – THURSDAY, JULY 12TH @ 10:00 A.M. CDT
<
PHOTO EXAMPLE (IN B & W) OF
MACHINE WITH CONTROL INSERT
2 AVAILABLE EXCELLENT
Want to Sell Your Shop or Know Someone
Who Does? Call Us Toll Free at
(888) 800-4442! We Pay Great Finder’s Fees!
>
PHOTO EXAMPLE (IN B & W) OF
MACHINE WITH NO
INSERT…ALWAYS USE A BORDER
1 of 2
Can’t Attend the Sale, but Still
Want to Bid?
Visit www.asset-sales.com
for More Bidding Options!
>
KITAMURA MODEL MYCENTER 4
VERTICAL MACHINING CENTER
TOYODA AWEA MODEL BM1400 VERTICAL MACHINING CENTER
TOYODA AWEA MODEL BM1400 VERTICAL MACHINING CENTER
2007
2006
2005
2001
WWW.ASSET-SALES.COM
VERTICAL MACHINING
CENTERS TOYODA Awea Model BM1400 Vertical Machining
Center with 31 ½ x 59” Table, 55” X-Axis Travel, 31.5”
Y-Axis, 27.6” Z-Axis, # 50 Taper Spindle Speeds to
6,000 RPM, High Pressure Thru Spindle Coolant, 30
ATC, Dual Chip Augers, Full Enclosure, Yuasa DMNC-
28001 4th Axis (to be sold separate), FANUC 18i-MB
CNC Pendant Control with Remote Pulse Generator,
mfg.2007, sn:7024
TOYODA Awea Model BM1400 Vertical Machining
Center with 31 ½ x 59” Table, 55” X-Axis Travel, 31.5”
Y-Axis, 27.6” Z-Axis, # 50 Taper Spindle Speeds to
6,000 RPM, High Pressure Thru Spindle Coolant, 30
ATC, Dual Chip Augers, Full Enclosure, Yuasa DMNC-
28001 4th Axis (to be sold separate), FANUC 18i-MB
CNC Pendant Control with Remote Pulse Generator,
mfg.2006, sn:6002
KITAMURA Model MyCenter 4 Vertical Machining
Center with 22 ½” x 55” Table, 44” X-Axis Travel, 22”
Y-Axis, 22” Z-Axis, # 40 Taper Speeds to 10,000
RPM, 30 ATC, Chip Conveyor, Full Enclosure, Yasnac
CNC Pendant Control, sn:30574
ATTENDING THE AUCTION IN PERSON?
What you need to Bring…
•Your Drivers License
•Business Card
•Tax Exempt Form if You’re Non Taxable
•Bank Letter of Guarantee if You Will be
Paying via Company Check.
Page 3
MACHINERY INSPECTION DATE & TIMES – WEDNESDAY, JULY 11TH FROM 8:00 A.M. – 4:00 P.M. CDT
<
DAEWOO
MODEL
PAN20 CNC
FLAT BED
LATHE
<
VICTOR 20/24” X 80”
GAP BED ENGINE
LATHE
CHMER MODEL CW-643S CNC WIRE EDM
FORTUNE MODEL VTURN-36 CNC TURNING CENTER
Can’t Attend the Sale? Register on Bidspotter.com to Bid Live Online in this Auction!!
(888) 800-4442
3
>
ACRA TURN
13”/18” X 40”
GAP BED
ENGINE LATHE
FORTUNE MODEL VTURNII-26 CNC TURNING CENTER
2001 2003
2004
2000 2007
>
DAEWOO
MODEL
PAN20
CNC FLAT
BED
LATHE
CNC LATHES & TURNING
CENTERS FORTUNE Model VTurn-36 CNC Turning Center with
15” 3-Jaw Power Chuck, 25.59” Maximum Swing Over
Bed, 21.65” Maximum Turning Diameter, 50.79” Center
Distance, 49.41” Z-Axis Travel, Spindle Speeds to
2500 RPM, 4.13” Bore, 10 Station Turret, Tailstock,
Chip Conveyor, FANUC OT CNC Control, mfg.2001,
sn:MD-1441
FORTUNE Model VTurnII-26 CNC Turning Center with
10” 3-Jaw Power Chuck, 20.47” Maximum Swing Over
Bed, 14.96” Maximum Turning Diameter, 25” Center
Distance, 24” Z-Axis Travel, Spindle Speeds to 3500
RPM, 3.43” Bore, 10 Station Turret, Tailstock, Chip
Conveyor, FANUC Oi-TC CNC Control, mfg.2003,
sn:MY-1264
DAEWOO Model Pan20 CNC Flat Bed Lathe with 12”
3-Jaw Power Chuck, 20.5” Swing x 59.1” Center
Distance, 6 Position Front Turret, Rear 4-Way Tool
Post, Tailstock, Enclosure, FANUC 6T CNC Control,
sn:190037
DAEWOO Model Pan20 CNC Flat Bed Lathe with 10”
3-Jaw Power Chuck, 20.5” Swing x 59.1” Center
Distance, 6 Position Front Turret, Rear 4-Way Tool
Post, Tailstock, Enclosure, FANUC 10T CNC Control,
sn:190129
CNC WIRE EDM CHMER Model CW-643S CNC Wire EDM with 41” x
34” x 21” Tank Size, 23.6” X-Axis Travel, 15.7” Y-Axis,
11.8” Z-Axis, 37.4” x 27.6” x 116” Maximum Workpiece,
Auto Threading, Chiller, 5 Axis CNC Control, mfg.2004,
sn:G402079
ENGINE LATHE VICTOR 20”/24” x 80” Gap Bed Engine Lathe Model
2080G with 10” 3-Jaw Chuck, Chuck Guard, 10 HP
Spindle Speeds 16-1800 RPM, 2 ¼” Spindle Bore,
Steady Rest, sn:710681
ACRA TURN 13”/18” x 40” Gap Bed Engine Lathe
Model 1340 with 6” 3-Jaw Chuck, Spindle Speeds to
1800 RPM, 1 ¾” Spindle Bore, Tool Post, sn:52567
WWW.ASSET-SALES.COM
Page 4
4
AUCTION SALE DATE & TIME – THURSDAY, JULY 12TH @ 10:00 A.M. CDT xx AVAILABLE EXCELLENT
SPEC
INFO
Want to Sell Your Shop or Know
Someone Who Does? Call Us Toll Free
at (888) 800-4442! We Pay Great
Finder’s Fees!
>
BELMONT
MAXICUT
SEE CNC
DIE SINKER >
HEALD
MODEL 72A
INTERNAL
GRINDER
ARTER 10” HORIZONTAL ROTARY SURFACE GRINDER
<
MITSUBISHI
MODEL FX20
CNC WIRE
EDM
HEALD MODEL 272 TOOLROOM INTERNAL GRINDER
CINCINNATI 10” SWING X 72” CENTERS PLAIN CYLINDRICAL
GRINDER
1 of 2
2001 2005 2000 1997 1997
GRINDERS CINCINNATI 10” Swing x 72” Centers Plain
Cylindrical Grinder Model 10R with 3” Wide
Grinding Wheel, Variable Speed Workhead,
Tailstock, Coolant, sn:3531215V-2
HEALD Model 272 Toolroom Internal Grinder
with 12” 3-Jaw Chuck, Red Head Spindle, 22”
Swing Over Table, Coolant, 8200RPM
HEALD Model 72A Internal Grinder with 15” 3-
Jaw Chuck, 18” Swing, Swing Down Dresser,
Red Head Spindle, Coolant, 3500 RPM,
sn:45684-49-5
GARDNER Model 77A Double Disc Grinder
ARTER 10” Horizontal Rotary Surface Grinder
with 10” Magnetic Chuck, 16” Wheel, Coolant,
sn:1862
MATTISON 14” x 48” Hydraulic Surface
Grinder with 14” x 48” Electromagnetic Chuck,
Overhead Wheel Dresser, 16” x 3” Wide
Grinding Wheel, 15HP , sn:0509N013
REID 6” x 18” Hydraulic Surface Grinder Model
618H with 6” x 18” Permanent Magnetic
Chuck, 2-Axis Sony DRO, Coolant, sn:14152
BROWN & SHARPE 8” x 24” Surface Grinder
with Permanent Magnetic Chuck, Coolant
SHINKO-BURTON 6” x 15” Surface Grinder
Model 615 with Permanent Magnetic Chuck,
Coolant, sn:4408
Tool & Cutter Grinders, Double End Pedestal
& Bench Grinders, ETC.
ANGLE SHEAR 90 Ton FRANKLIN Model 1506SHR Angle
Shear with 6” x 6” x 5/8” Shear Capacity, 3PH,
10HP, Infeed and Outfeed Conveyors,
mfg.1991, sn:960F1436
GARDNER MODEL 77A DOUBLE DISC GRINDER
MATTISON 14” X 48” HYDRAULIC SURFACE GRINDER
REID 6” X 18” HYDRAULIC SURFACE
GRINDER
BROWN & SHARPE 8” X 24” SURFACE GRINDER
Can’t Attend the Sale?
Still Want to Bid? Visit
Our Website at
www.asset-sales.com
and Check Out Our
Upcoming Auction
Calendar! You Can Also
Sign Up to Receive Email
Notifications by Joining
Our Mailing List!
90 TON FRANKLIN ANGLE SHEAR
Page 5
MACHINERY INSPECTION DATE & TIMES – WEDNESDAY, JULY 11TH FROM 8:00 A.M. – 4:00 P.M. CDT
Can’t Attend the Sale? Register on Bidspotter.com to Bid Live Online in this Auction!! (888) 800-4442
5
36” FELLOWS PFAUTER MODEL P900 GEAR HOBBER
2 of 5
2 AVAILABLE
Visit Our Website to View
a Calendar of Additional
Upcoming Industrial
Machine Auctions!
www.asset-ales.com
Visit Our
Website to
See
Upcoming
Auctions &
Join Our
Mailing List
www.asset-
sales.com Visit Our
Website
to View a
Calendar of
Upcoming
Auctions! While
You’re There,
Join Our
Mailing List and
Receive Email
Notifications of
Future Sales!
MILLING MACHINES BRIDGEPORT Vertical Milling Machine with 9” x 48” Power Feed Table, R-8 Spindle Speeds Variable to 4200 RPM, Acu-Rite Mill
Mate 2-Axis DRO, mfg.1993, sn:BR263899
BRIDGEPORT Vertical Milling Machine with 9” x 42” Table, Riser, R-8 Spindle Speeds Variable, Sony 2-Axis DRO, sn:163476
WELLS Index Vertical Milling Machine Model 837 with 10” x 42” Table, 3 HP R-8 Spindle, Variable Speeds, Power Table Feed,
Anilam Wizard 2-Axis DRO, sn:1706
MSC Vertical Milling Machine with 9” x 49” Table, 2 HP R-8 Spindle, Variable Speeds, Anilam Wizard 2-Axis DRO, sn:771525
ENCO Vertical Milling Machine with 9” x 42” Table, R-8 Spindle Speeds Variable, 2-Axis DRO, sn:503283
CINCINNATI No.3 Vertical Milling Machine with 15” x 62” Table, No.50 Taper Spindle, sn:2A3VIK-106
CINCINNATI No.2 Horizontal Milling Machine with 12” x 52” Table, No.50 Taper Spindle, Over Arm & Support, Chip Pan,
sn:4A2P1L-141
GEAR SHAPERS (2) FELLOWS Model 6A Gear Shapers, 20” Diameter Capacity, (1) with Riser, sn:615A; 61A
GEAR HOBBERS 36” FELLOW PFAUTER Model P900 Gear Hobber with 36” Table Diameter, Approximately 19-3/4” Gear Width, Universal Hob Head
Two Cut Worm Cycle, Tailstock & Enclosure, mfg.1971, sn:23582 (paperwork shows recondition 1993)
GOULD & EBERHARDT Model 618-5 Gear Hobber with 16” Table, Riser, Universal Hob Head, sn:248A9
GOULD & EBERHARDT Gear Hobber with 14” Table, sn:1787A
(2) GOULD & EBERHARDT Model 12H 10” Diameter Gear Hobber with Tailstock, 1 Thread Worm, 36 Tooth Gear, Change Gears,
sn:4700A4 & 560A6
GOULD & EBERHARDT Reord 30” Gear Hobber with 30” Table, Tailstock & Support
HORIZONTAL GEAR HOBBERS (2) BARBER COLMAN Model 16-16/36 Multicycle Gear Hobbers with16” Maximum Work Diameter, 36” Extended Centers, Dwell
Timer, Automatic Hob Shift, Tailstock, Single & 4 Thread Index Worms, sn:4402; 4573
(3) BARBER COLMAN Type A Gear Hobbers with Double & Single Thread Index Worm, 16” Maximum Work Diameter, 17” Travel
of Hob Carriage, Tail Stock, sn:633; 2253 & 972
HOB SHARPENER BARBER COLMAN No.4-4 Hob Sharpener with 4” Diameter Capacity x 4” Work Length, 15” Maximum Center Distance, sn:3543
>
(2)
FELLOWS
MODEL 6A
GEAR
SHAPERS
GOULD & EBERHARDT MODEL 12H GEAR
HOBBER
>
MISCELLANEOUS
VERTICAL MILLS
<
BRIDGEPORT
VERTICAL
MILLING
MACHINE
(2) BARBER COLMAN MODEL 16-16/36
MULTICYCLE GEAR HOBBERS
BARBER COLMAN GEAR HOBBER
<
BARBER
COLMAN
NO.4-4 HOB
SHARPENER
1 of 2 1 of 5
1 of 2
Page 6
6
AUCTION SALE DATE & TIME – THURSDAY, JULY 12TH @ 10:00 A.M. CDT
xx AVAILABLE EXCELLENT
SPEC
INFO
Want to Sell Your Shop or Know Someone Who Does? Call Us Toll Free at
(888) 800-4442! We Pay Great Finder’s Fees!
1 of 2
Visit Our Website to
View a Calendar of
Additional Upcoming
Industrial Machine
Auctions!
www.asset-sales.com
KOMATSU 5000LB PROPANE FORKLIFT
DONALDSON MODEL VF50 AIR
DRYER
>
10 HP
INGERSOLL-RAND
MODEL SSR-P10
ROTARY SCREW AIR
COMPRESSOR
HEM MODEL H105-LA 16” X 20” AUTOMATIC HORIZONTAL BAND SAW
MARKLIFT ELECTRIC SCISSOR/MANLIFT
WARNER SWASEY NO.2A MODEL M510 TURRET LATHE
>
2 TON X 45’
WIDE DEMAG
TOP RUNNING
BRIDGE
CRANE WITH
RUNWAY
TURRET LATHE WARNER SWASEY No.2A Model M510 Turret Lathe with
15” 3-Jaw Chuck, 3 ¾ Spindle Bore, 5 Position Turret with
Tools, sn:328296
HORIZONTAL BAND SAWS HEM Model H105-LA 16” x 20” Automatic Horizontal Band
Saw with Auto –Index Feed, Hydraulic Vises, 7½ HP, 1 ¼”
Blade, PLC Control, Chip Auger, 22” W x 10 ½’ Conveyor,
Discharge Table, mfg.2003, sn:838103
WELLS Model 1016 Miter Cutting Horizontal Band Saw with
10” x 16” Capacity, Infeeding Conveyor & Discharge Table,
sn:1238
ASSORTED PRESSES & DRILLS 12 ½ Ton H-Frame Hydraulic Press with 23” Between
Uprights, Adjustable Rail
DENISON 6 Ton Hydraulic Press with Stand Model
M6C04A12A11, sn:1997
FAMCO No.5 Floor Standing Arbor Press
FAMCO No.2 Bench Type Arbor Press
DELTA 18” 2 Spindle Drill Press with 23 ½ x 36” Table Size,
2 MT
CUMMINS Model C117-F Floor Type Drill Press
ROCKWELL & DELTA Bench Type Drill Presses
AIR COMPRESSORS 10 HP INGERSOLL-RAND Model SSR-P10 Rotary Screw Air
Compressor with 35 CFM, Enclosure, sn:A02071V95138
5 HP GARDNER DENVER Reciprocating Air Compressor
DONALDSON Model VF50 Air Dryer
BRIDGE CRANE & HOIST 2 Ton x 45’ Wide DEMAG Top Running Overhead Bridge
Crane System with Pendant Control, Approximately 180’
Long Runway & Uprights
½ Ton DEMAG x 25’ Wide Crane with 50’ Runway, Pendant
Other ½ - 1 Ton Electric Hoists & Crane Systems
ROLLING & MATERIAL HANDLING KOMATSU 5000lb Propane Forklift Model FG25C-12 with 2
Stage Mast, Pneumatic Tires, 48” Forks, mfg.1997,
sn:502631A
MARKLIFT Electric Scissor /Manlift Model CH20NEP with
28” x 98” Platform, 800lb Capacity x 20’ Maximum Platform
Height, sn:25422
MISCELLANEOUS Numerous Sections of Pallet Racking, Change Gears, Risers,
Hobbs, Assorted Gear Manufacturing Equipment,
Miscellaneous Steel, Perishable Tooling, #40 & #50 Taper
Toolholders, 4th Axis, Vises, Lathe & Mill Tooling, EDM
Tooling, LINCOLN 225 AMP Welder, EVERETT 8” Abrasive
Chop Saw, DELTA 4” Belt Sander, Pedestal Grinders,
Cabinetry, Office Furniture, Thermolyne Series 85Model F-
A1740-15 Electric Oven, Etc…. DAVIS NO.4 KEYSEATER HANSFORD DAVIS
KEYSEATER
KEYSEATER MITTS & MERRILL No.4
Keyseater with 2.5”
Maximum Keyway Width,
Table, sn:09701
HANSFORD DAVIS
Model Keyseater with
31” x 20” T-Slot Table,
Over Arm
DAVIS No.4 Keyseater,
sn:4-1164
MITTS & MERRILL NO.4
KEYSEATER
WWW.ASSET-SALES.COM
2003
1997
Page 7
7
ABBREVIATED TERMS & CONDITIONS OF AUCTION Subject to amendments and modifications
announced by the auctioneer at the time of
the auction, any person participating in the
auction shall be bound by the following
terms and conditions. The auctioneer
does not warrant the accuracy,
authenticity, description, weight, count or
measure of any listings specified herein.
All articles will be sold to the highest
bidder conforming to the bid process in
accordance to the AUCTIONEER’S TERMS
& CONDITIONS – COMPLETE COPIES
AVAILABLE AT WWW.ASSET-
SALES.COM. No article shall be removed
unless paid in full and all articles
purchased shall be removed in the time
allocated by the auctioneer. No item, no
matter how small or how far the purchaser
has to travel, may be removed until the
close of the auction sale.
All payments shall be by way of cash,
certified check, wire transfer and/or a
company check accompanied by a bank
letter of guarantee payable to Asset Sales,
Inc. All bidding and invoicing will be in US
Dollars ($). All bidders are responsible for
all applicable taxes.
Rigging/ Removal of sold equipment is the
sole responsibility of the buyer and must
be completed by the posted date.
Rigging/Removal may not begin until
payment has been made in full and the
auction sale is complete. All heavy rigging
will require a certificate of insurance for
$1,000,000.00 naming Asset Sales, Inc. as
the insured.
ALL SALES ARE FINAL, ON AN “AS IS –
WHERE IS,” “IN PLACE,” “WITH ALL
FAULTS” BASIS.
A 13% Buyer’s Premium will apply to all onsite
purchases and a 16% Buyer’s Premium for online
purchases.
REGISTRATION & BIDDING ONLINE: If you plan to bid with Bidspotter.com, you must be
pre-approved by Asset Sales, Inc. The pre-approval
process is easy, but necessary. Asset Sales, Inc.
will verify telephone number and confirm agreement
to the Terms and Conditions.
Anyone outside of the continental United States will
be required to wire transfer a minimum deposit of
$5000 to be approved for all non-onsite bidding.
MACHINERY INSPECTION DATE & TIMES – WEDNESDAY, JULY 11TH FROM 8:00 A.M. – 4:00 P.M. CDT WWW.ASSET-SALES.COM
Page 8
HOTEL
Street Address
City, State Zip Code
Telephone Number
“LYNYRD SKYNYRD”
MILWAUKEE IRON STREET SURVIVOR
DIRECTIONS – FROM CHICAGO O’HARE INTERNATIONAL AIRPORT APPROXIMATELY 45 MIN.
Take exit 1C for I-90 West / Tollway toward Rockford. Merge onto I-90West. Take the IL-47N for approximately 3 miles. Turn right onto E. Main Street, plant will be on the left. Follow the auction signs.
HOTELS
Corporate Headquarters 301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079 Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.com Asset Sales, Inc. – Illinois License # 441.001066
Want to join our mailing list? Want to be included in
Email Blasts announcing future auctions? Want to
update your address? Curious to preview machines and
tooling featured in an upcoming auction? Want to
request a brochure? Or want to be removed from our
mailing list?
Just write the info on the back cover of this
brochure and email or fax it to us at:
[email protected] or (704) 821-4325
Visit our website at www.asset-sales.com to view all of our
Upcoming Auctions, Download Complete Brochures, or to
Register to Bid Online.
Asset Sales, Inc.
PUBLIC AUCTION MARQUARDT ENGINEERING
Gear, Late Model CNC & Grinding
Huntley, IL
THURSDAY, JULY12th @ 10:00 A.M. CDT
HOLIDAY INN EXPRESS HOTEL &
SUITES CHICAGO-ALGONQUIN
2595 Bunker Hill Drive
Algonquin, IL 60102
(847) 458-6000 UPCOMING AUCTIONS
TUESDAY, MARCH 27TH – Allstate Diversified Products
CNC Fabricating & Stamping Facility – Syracuse, NY
TUESDAY, MAY 15TH – Tri-America Contractors
Structural Steel Fabrication – Ironton, OH
3 AVAILABL
E
COUNTRY INN & SUITES BY CARLSON
ELGIN
2270 Point Blvd
Elgin, IL 60123
(847) 426-6400
CINCINNATI 10” SWING X 72” CENTERS PLAIN CYLINDRICAL GRINDER
?
UPCOMING AUCTIONS FRIDAY, JUNE 15th – R&D Enterprise Contractors, Inc.
Excavation & Construction Company, Yellow Iron –
Chambersburg, PA
WEDNESDAY, JUNE 27th – Tri-America Steel Division
Fabricating Shop – Ironton, OH
TBA – Tyler Pipe
Iron Foundry – Tyler, TX
AUGUST TBA – Fabricating & Machinery Facility
Amada’s, Laser & Fabricating – Vermont
UPCOMING AUCTIONS WEDNESDAY, JUNE 27th – Tri-America Steel Division
Fabricating Shop – Ironton, OH
THURSDAY, JUNE 28th – Major Medical Mfg.
ONLINE ONLY
Metalworking, CMM & Plastic Welder
Mansfield, MA
TBA – Tyler Pipe
Iron Foundry – Tyler, TX
TUESDAY, OCTOBER 16th - Fabricating & Machinery Facility
ONLINE ONLY
Amada’s, Laser & Fabricating
Vermont
VERTICAL MACHINING CENTERS TOYODA Awea Model BM1400 Vertical Machining Center with 31 ½ x 59” Table, 55” X-Axis Travel, 31.5”
Y-Axis, 27.6” Z-Axis, # 50 Taper Spindle Speeds to 6,000 RPM, High Pressure Thru Spindle Coolant, 30
ATC, Dual Chip Augers, Full Enclosure, Yuasa DMNC-28001 4th Axis (to be sold separate), FANUC 18i-
MB CNC Pendant Control with Remote Pulse Generator, mfg.2007, sn:7024
TOYODA Awea Model BM1400 Vertical Machining Center with 31 ½ x 59” Table, 55” X-Axis Travel, 31.5”
Y-Axis, 27.6” Z-Axis, # 50 Taper Spindle Speeds to 6,000 RPM, High Pressure Thru Spindle Coolant, 30
ATC, Dual Chip Augers, Full Enclosure, Yuasa DMNC-28001 4th Axis (to be sold separate), FANUC 18i-
MB CNC Pendant Control with Remote Pulse Generator, mfg.2006, sn:6002
KITAMURA Model MyCenter 4 Vertical Machining Center with 22 ½” x 55” Table, 44” X-Axis Travel, 22” Y-
Axis, 22” Z-Axis, # 40 Taper Speeds to 10,000 RPM, 30 ATC, Chip Conveyor, Full Enclosure, Yasnac
CNC Pendant Control, mfg.1992, sn:30574
CNC LATHES & TURNING CENTERS FORTUNE Model VTurn-36 CNC Turning Center with 15” 3-Jaw Power Chuck, 25.59” Maximum Swing
Over Bed, 21.65” Maximum Turning Diameter, 50.79” Center Distance, 49.41” Z-Axis Travel, Spindle
Speeds to 2500 RPM, 4.13” Bore, 10 Station Turret, Tailstock, Chip Conveyor, FANUC OT CNC Control,
mfg.2001, sn:MD-1441
FORTUNE Model VTurnII-26 CNC Turning Center with 10” 3-Jaw Power Chuck, 20.47” Maximum Swing
Over Bed, 14.96” Maximum Turning Diameter, 25” Center Distance, 24” Z-Axis Travel, Spindle Speeds to
3500 RPM, 3.43” Bore, 10 Station Turret, Tailstock, Chip Conveyor, FANUC Oi-TC CNC Control,
mfg.2003, sn:MY-1264
DAEWOO Model Pan20 CNC Flat Bed Lathe with 12” 3-Jaw Power Chuck, 20.5” Swing x 59.1” Center
Distance, 6 Position Front Turret, Rear 4-Way Tool Post, Tailstock, Enclosure, FANUC 6T CNC Control,
sn:190037
DAEWOO Model Pan20 CNC Flat Bed Lathe with 10” 3-Jaw Power Chuck, 20.5” Swing x 59.1” Center
Distance, 6 Position Front Turret, Rear 4-Way Tool Post, Tailstock, Enclosure, FANUC 10T CNC Control,
sn:190129
CNC WIRE EDM CHMER Model CW-643S CNC Wire EDM with 41” x 34” x 21” Tank Size, 23.6” X-Axis Travel, 15.7” Y-
Axis, 11.8” Z-Axis, 37.4” x 27.6” x 116” Maximum Workpiece, Auto Threading, Chiller, 5 Axis CNC Control,
mfg.2004, sn:G402079
GRINDERS CINCINNATI 10” Swing x 72” Centers Plain Cylindrical Grinder Model 10R with 3” Wide Grinding Wheel,
Variable Speed Workhead, Tailstock, Coolant, sn:3531215V-2
HEALD Model 272 Toolroom Internal Grinder with 12” 3-Jaw Chuck, Red Head Spindle, 22” Swing Over
Table, Coolant, sn:34473
HEALD Model 72A Internal Grinder with 15” 3-Jaw Chuck, 18” Swing, Swing Down Dresser, Red Head
Spindle, Coolant, sn:20-53
GARDNER Model 77A Double Disc Grinder
ARTER 10” Horizontal Rotary Surface Grinder with 10” Magnetic Chuck, 16” Wheel, Coolant, sn:1862
MATTISON 14” x 48” Hydraulic Surface Grinder with 14” x 48” Electromagnetic Chuck, Overhead Wheel
Dresser, 16” x 3” Wide Grinding Wheel, 15HP , sn:13695
REID 6” x 18” Hydraulic Surface Grinder Model 618H with 6” x 18” Permanent Magnetic Chuck, 2-Axis
Sony DRO, Coolant, sn:14152
BROWN & SHARPE 8” x 24” Surface Grinder with Permanent Magnetic Chuck, Coolant
SHINKO-BURTON 6” x 15” Surface Grinder Model 615 with Permanent Magnetic Chuck, Coolant, sn:4408
Tool & Cutter Grinders, Double End Pedestal & Bench Grinders, ETC.
MILLING MACHINES BRIDGEPORT Vertical Milling Machine with 9” x 48” Power Feed Table, R-8 Spindle Speeds Variable to
4200 RPM, Acu-Rite Mill Mate 2-Axis DRO, sn:BR263899
BRIDGEPORT Vertical Milling Machine with 9” x 42” Table, Riser, R-8 Spindle Speeds Variable, Sony 2-
Axis DRO, sn:163476
WELLS Index Vertical Milling Machine Model 837 with 10” x 42” Table, 3 HP R-8 Spindle, Variable
Speeds, Power Table Feed, Anilam Wizard 2-Axis DRO, sn:1706
MSC Vertical Milling Machine with 9” x 49” Table, 2 HP R-8 Spindle, Variable Speeds, Anilam Wizard 2-
Axis DRO, sn:771525
ENCO Vertical Milling Machine with 9” x 42” Table, R-8 Spindle Speeds Variable, 2-Axis DRO, sn:503283
CINCINNATI No.3 Vertical Milling Machine with 15” x 62” Table, No.50 Taper Spindle, sn:2A3VIK-106
CINCINNATI No.2 Horizontal Milling Machine with 12” x 52” Table, No.50 Taper Spindle, Over Arm &
Support, Chip Pan, sn:4A2P1L-141
ENGINE LATHE VICTOR 20/24” x 80” Gab Bed Engine Lathe Model 2080G with, 10” 3-Jaw Chuck, Chuck Guard, 10 HP
Spindle Speeds 16-1800 RPM, 2 ¼” Spindle Bore, Steady Rest, sn:710681
ACRA TURN 13”/18” x 40” Gap Bed Engine Lathe Model 1340 with 6” 3-Jaw Chuck, Spindle Speeds to
______, 1 ¾” Spindle Bore, Tool Post, sn:52567
TURRET LATHE WARNER SWASEY No.2A Model M510 Turret Lathe with 15” 3-Jaw Chuck, 3 ¾ Spindle Bore, 5 Position
Turret with Tools, sn:328296
KEYSEATER MITTS & MERRILL No.4 Keyseater with 2.5” Maximum Keyway Width, Table, sn:09701
HANSFORD DAVIS Model _______ Keyseater with 31” x 20” T-Slot Table, Over Arm, sn:______
DAVIS No.4 Keyseater, sn:4-1164
GEAR SHAPER (2) FELLOWS Model 6A Gear Shapers, 20” Diameter Capacity, (1) with Riser, sn:615A; 61A
GEAR HOBBERS 36” FELLOW PFAUTER Model P900 Gear Hobber with 36” Table Diameter, Approximately 19-3/4” Gear
Width, Universal Hob Head Two Cut Worm Cycle, Tailstock & Enclosure, mfg.1971, sn:23582
GOULD & EBERHARDT Model 618-5 Gear Hobber with 16” Table, Riser, Universal Hob Head, sn:248A9
GOULD & EBERHARDT Gear Hobber with 14” Table, sn:1787A
GOULD & EBERHARDT Model 12H 10” Diameter Gear Hobber with Tailstock, 1 Thread Worm, 36 Tooth
Gear, Change Gears, sn:4700A4
GOULD & EBERHARDT Reord 30” Gear Hobber with 30” Table, Tailstock & Support, sn:_____
HORIZONTAL GEAR HOBBERS (2) BARBER COLMAN Model 16-36 Multicycle Gear Hobbers with16” Maximum Work Diameter, 36”
Maximum Travel of Hob Carriage, Dwell Timer, Automatic Hob Shift, Tailstock, Single & 4 Thread Index
Worms, sn:4402; 4573
(3) BARBER COLMAN Type A Gear Hobbers with Double & Single Thread Index Worm, 16’ Maximum
Work Diameter, 17” Travel of Hob Carriage, Tail Stock, sn:633; 2253 & 973
HOB SHARPENER BARBER COLMAN No.4-4 Hob Sharpener with 4” Diameter Capacity x 4” Work Length, 15” Maximum
Center Distance, sn:964
HORIZONTAL BAND SAWS HEM Model H105-LA 16” x 20” Automatic Horizontal Band Saw with Auto –Index Feed, Hydraulic Vises,
7½ HP, 1 ¼” Blade, PLC Control, Chip Auger, 22” W x 10 ½’ Conveyor, Discharge Table, sn:838103
WELLS Model 1016 Miter Cutting Horizontal Band Saw with 10” x 16” Capacity, Infeeding Conveyor &
Discharge Table, sn:1238
ASSORTED PRESSES & DRILLS 12 ½ Ton H-Frame Hydraulic Press with 23” Between Uprights, Adjustable Rail
DENISON 6 Ton Hydraulic Press with Stand Model M6C04A12A11, sn:1997
FAMCO No.5 Floor Standing Arbor Press
FAMCO No.2 Bench Type Arbor Press
DELTA 18” 2 Spindle Drill Press with 23 ½ x 36” Table Size, 2 MT
CUMMINS Model C117-F Floor Type Drill Press
ROCKWELL & DELTA Bench Type Drill Presses
AIR COMPRESSORS 10 HP INGERSOLL-RAND Model SSR-P10 Rotary Screw Air Compressor with 35 CFM, Enclosure,
sn:A02071V95138
5 HP GARDNER DENVER Reciprocating Air Compressor
DONALDSON Model VF50 Air Dryer, sn:V1CCNE1279
BRIDGE CRANE & HOIST 2 Ton x 40’ Wide DEMAG Top Running Overhead Bridge Crane System with Pendant Control,
Approximately 175’ Long Runway & Uprights
½ Ton DEMAG x 25’ Wide Crane with 50’ Runway, Pendant
Other ½ - 1 Ton Electric Hoists & Crane Systems
ROLLING & MATERIAL HANDLING KOMATSU 5000lb Propane Forklift Model FG25C-12 with 2 Stage Mast, Pneumatic Tires, 48” Forks,
mfg.1997, sn:502631A
MARKLIFT Electric Scissor /Manlift Model CH20NEP with 28” x 98” Platform, 800lb Capacity x 20’
Maximum Platform Height, mfg._______, sn:25422
MISCELLANEOUS Numerous Sections of Pallet Racking, Change Gears, Risers, Hobbs, Assorted Gear Manufacturing
Equipment, Miscellaneous Steel, Perishable Tooling, #40 & #50 Taper Toolholders, 4th Axis, Vises, Lathe
& Mill Tooling, EDM Tooling, LINCOLN 225 AMP Welder, EVERETT 8” Abrasive Chop Saw, DELTA 4”
Belt Sander, Pedestal Grinders, Cabinetry, Office Furniture, Thermolyne Series 85Model F-A1740-15
Electric Oven, Etc….
