UNECE
United Nations Food and Agriculture Organization
Economic Commission for Europe of the United Nations
TRADE OF ROUNDWOOD
AND SAWNWOOD BY
SPECIES
2010 - 2014
UNITED NATIONS
UNECE/FAO Trade of Roundwood and Sawnwood by Species, 2010-2014 2
Trade of Roundwood and Sawnwood by Species
Table of Contents
Notes, Acknowledgements ......................................................................................... 2
Trade of Coniferous Industrial Roundwood by Species ............................................. 4
Trade of Non-Coniferous Industrial Roundwood by Species ...................................... 8
Trade of Coniferous Sawnwood by Species ............................................................. 18
Trade of Non-Coniferous Sawnwood by species ...................................................... 22
Conversion Factors and Questionnaire 2014 ........................................................... 36
Geographic Disclaimer
The designations employed and the presentation of material in this publication do not imply the expression of any opinion whatsoever on the part of the secretariat of the United Nations concerning the legal status of any country, territory, city or area, or of its authorities, or concerning the delimitation of its frontiers or boundaries. Note One of the most frequent requests received by the secretariat concerns the species composition of trade flows, a matter which is of the greatest interest to producers and exporters of roundwood and sawnwood. This information has been collected in the context of the Joint Forest Sector Questionnaire for the past several years. Data were first published in 2004. We welcome your comments, which should be sent to the address below. Although the data have been reviewed and controlled for incorrect or unusual values, the quality of the data is limited by the fact that some countries did not provide any data or provided only partial data, and by the encouragement of the ECE/FAO Team of Specialists on Forest Products Statistics that publishing the information we do have is preferable to keeping it unavailable while trying to perfect it. Definitions The Forest Products Statistics includes definitions for roundwood and sawnwood. A copy of the questionnaire and the associated Harmonised System (HS) trade classification codes is available at the end of this publication.
UNECE/FAO Trade of Roundwood and Sawnwood by Species, 2010-2014 3
Data source Data are provided through national correspondents who reply to the Joint Forest Sector Questionnaire, issued by ECE/FAO/Eurostat and ITTO. Data are taken from the questionnaire ECE/EU1 and from the UN’s COMTRADE and the EU’s COMEXT databases. Data aggregation and processing was finalized in December 2015. Symbols and Abbreviations used m3 = cubic meter US $ = US Dollar … = not available E = estimate by the secretariat R = figure repeated from the previous year N = national estimate Regional totals are sums of the corresponding countries and do not have any flags attached to the data. In some cases figures shown as repeated are not identical to the previous figures, either due to exchange rate variation or changes to figures which were not updated for following years. Acknowledgements We would like to thank the correspondents who provided data through the Joint Forest Sector Questionnaire as well as the members of the Intersecretariat Working Group on Forest Sector Statistics. These data would simply not be available without their contribution. A list of correspondents can be found in the Forest Products Annual Market Review publication.
UNECE/FAO Forestry and Timber Section United Nations Economic Commission for Europe
Palais des Nations CH-1211 Geneva 10
Switzerland
e-mail: [email protected]
Product - Produits Unit - Unité Cubicfeet
Piedscubes
ROUNDWOOD - BOIS RONDS a
Sawlogs - Grumes de sciage : Coniferous - Conifères 1000 board feet 4.53 160 3.171 1.43
M3 1 35.31 0.7 1.43 Non-coniferous - Non-conifères 1000 board feet 4.53 160 3.624 1.25
M3 1 35.31 0.8 1.25
Tropical - Tropicales M3 1 35.31 0.73 1.37
Pulpwood - Bois de trituration Cord - Corde 2.55 90 1.7212 1.48
Pitprops - Bois de mine Fathom 4.28 151.1 3.103 1.38
Fuelwood - Bois de chauffage : Cord - Corde 2.12 74.9 1.537 1.38 Coniferous - Conifères Stere - Stère 0.7 24.7 0.4375 1.6 Non-coniferous - Non-conifères Stere - Stère 0.65 23 0.4875 1.33
PROCESSED WOOD - BOIS TRAVAILLES Sawnwood - Sciages : Coniferous - Conifères Standard 4.672 165 2.57
M3 b 1 35.31 0.55 1.82 1.67 59
Non-coniferous - Non-conifères M3 1 34.31 0.7 1.43 1.82 64
Sleepers - Traverses M3 1 35.31 0.78 1.28 1.82 64
Plywood - Contreplaqués :
per 1mm. thickness - par 1 mm. d'épaisseur 1000 m2 1 35.31 0.65 1.54 2.3 81 per 1/8 in. thickness - par 1/8 de pouce d'épaisseur 1000 sq.ft. - 1000 pieds carrés 0.295 10.42
Veneer sheets - Feuilles de placage :
per 1mm. thickness - par 1 mm. d'épaisseur 1000 m2 1 35.31 0.75 1.33 1.9 67 per 1/10 in. thickness - par 1/10 de pouce d'épaisseur 1000 sq.ft. - 1000 pieds carrés 0.236 8.33
Particle board - Panneaux de particules :
per 1mm. thickness - par 1 mm. d'épaisseur 1000 m2 1 35.31 per 1/8 in. thickness - par 1/8 de pouce d'épaisseur 1000 sq.ft. - 1000 pieds carrés 0.295 10.42 0.192
Fibreboard - Panneaux de fibres :
Hardboard - Durs : 1000 cu.ft. - 1000 pieds cubes 28.32 1000 26.9
per 1mm. thickness - par 1 mm. d'épaisseur 1000 m2 1 35.31 0.95 per 1/8 in. thickness - par 1/8 de pouce d'épaisseur 1000 sq.ft. - 1000 pieds carrés 0.295 10.42 0.28
Insulating - Isolants : 1000 cu.ft. - 1000 pieds cubes 28.32 1000 7.08
per 1mm. thickness - par 1 mm. d'épaisseur 1000 m2 1 35.31 0.25 per 1/8 in. thickness - par 1/8 de pouce d'épaisseur 1000 sq.ft. - 1000 pieds carrés 0.295 10.42 0.074
a Without bark. a Sans écorce.b 1 m3 = 424 board feet. b 1 m3 = 424 pieds planche
metres feet in metric tons per metric ton metresMètres Pieds Poids moyen en Mètres cubes par Mètrescubes cubes tonnes métriques tonnes métriques cubes
STANDARD GENERAL CONVERSION FACTORS - COEFFICIENTS DE CONVERSION GENERAUX TYPES
Roundwood equivalentSolid volume - Volume solide Volume équivalent en
bois rond
Cubic Cubic Average weight Cubic metres Cubic
Country: Date:
Telephone: Fax:E-mail:
Specify Currency and Unit of Value (e.g.:1000 national currency):
Product Classification Classification Unit of
Code HS2012 CN2012 Product Quantity Quantity Value Quantity Value Quantity Value Quantity Value1.2.C 4403.20 Industrial Roundwood, Coniferous 1000 m3ub
ex4403.20 Fir/Spruce (Abies spp., Picea spp. ) 1000 m3ub44.03.20.11 sawlogs and veneer logs (Abies alba, Picea abies ) 1000 m3ub44.03.20.19 pulpwood and other industrial roundwood (Abies alba, Picea abies ) 1000 m3ub
ex4403.20 Pine (Pinus spp. ) 1000 m3ub44.03.20.31 sawlogs and veneer logs (Pinus sylvestris ) 1000 m3ub44.03.20.39 pulpwood and other industrial roundwood (Pinus sylvestris ) 1000 m3ub
ex4403.20 Other / Non-specified 1000 m3ub44.03.20.91 sawlogs and veneer logs 1000 m3ub44.03.20.99 pulpwood and other industrial roundwood 1000 m3ub
1.2.NC 4403.41/49/91/92/99 Industrial Roundwood, Non-Coniferous 1000 m3ub
4403.91 of which: Oak (Quercus spp. ) 1000 m3ub44.03.91.10 sawlogs and veneer logs 1000 m3ub44.03.91.90 pulpwood and other industrial roundwood 1000 m3ub
4403.92 of which: Beech (Fagus spp. ) 1000 m3ub44.03.92.10 sawlogs and veneer logs 1000 m3ub44.03.92.90 pulpwood and other industrial roundwood 1000 m3ub
ex4403.99 of which: Birch (Betula spp. ) 1000 m3ub44.03.99.51 sawlogs and veneer logs 1000 m3ub44.03.99.59 pulpwood and other industrial roundwood 1000 m3ub
ex4403.99 44.03.99.10 of which: Poplar/Aspen (Populus spp. ) 1000 m3ubex4403.99 44.03.99.30 of which: Eucalyptus (Eucalyptus spp. ) 1000 m3ub
5.C 4407.10 Sawnwood, Coniferous 1000 m3
ex4407.10 of which: Fir/Spruce (Abies spp., Picea spp. ) 1000 m3
ex4407.10 of which: Pine (Pinus spp. ) 1000 m3
5.NC4407.21/22/25/26/27/28/29/91/92/93/94/95/99
Sawnwood, Non-coniferous 1000 m3
4407.91 of which: Oak (Quercus spp. ) 1000 m3
4407.92 of which: Beech (Fagus spp. ) 1000 m3
4407.93 of which: Maple (Acer spp. ) 1000 m3
4407.94 of which: Cherry (Prunus spp. ) 1000 m3
4407.95 of which: Ash (Fraxinus spp. ) 1000 m3
ex4407.99 of which: Poplar/Aspen (Populus spp. ) 1000 m3
ex4407.99 of which: Birch (Betula spp. ) 1000 m3
Light blue cells are requested only for EU members using the Combined Nomenclature to fill in - other countries are welcome to do so if their trade classification nomenclature permits"ex" codes indicate that only part of that trade classication code is usedPlease note that information on tropical species trade is requested in questionnaire ITTO2 for ITTO member countriesm3ub = cubic metres underbark (i.e. excluding bark)
2014 2015 2014 2015
I M P O R T E X P O R T
_________________________
ECE/EU Species TradeTrade in Roundwood and Sawnwood by species
FOREST SECTOR QUESTIONNAIRE
Official Address (in full):
Name of Official responsible for reply: