+ All Categories
Home > Documents > Trailer Bodywork · (FOR TRAILERS MANUFACTURED BEFORE APRIL 2008) BOX VAN MODELS LIVESTOCK MODELS *...

Trailer Bodywork · (FOR TRAILERS MANUFACTURED BEFORE APRIL 2008) BOX VAN MODELS LIVESTOCK MODELS *...

Date post: 21-Aug-2020
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
11
Plywood • Steel & Aluminium Sheet • Safety & Security Products Trailer Bodywork Page Inspection doors – Horsebox, Boxvan & Livestock 145 Horsebox coated panels. HB403, HB506 & HB511 146 Horsebox coated panels. HB401, HB505 & HB510 147 Body panels, roof channels, roof sheets & flooring 148 Seals & capping 149 GRP Roofs and wind deflectors 150 Glazing & ventilation 151 Lighting brackets & protection plates 152 Drawbars 153 Mudguards & brackets 154 Contents
Transcript
Page 1: Trailer Bodywork · (FOR TRAILERS MANUFACTURED BEFORE APRIL 2008) BOX VAN MODELS LIVESTOCK MODELS * * * Denotes trailer model illustrated (H/R = headroom) HB510 Double horsebox HB403

Plywood • Steel & Aluminium Sheet • Safety & Security Products

Trailer Bodywork

Page

Inspection doors – Horsebox, Boxvan & Livestock 145Horsebox coated panels. HB403, HB506 & HB511 146Horsebox coated panels. HB401, HB505 & HB510 147Body panels, roof channels, roof sheets & flooring 148Seals & capping 149GRP Roofs and wind deflectors 150Glazing & ventilation 151Lighting brackets & protection plates 152Drawbars 153Mudguards & brackets 154

Contents

DP120 12' with optional large cross divisions fitted

8. IWT Catalogue'09 P130-151_Ifor Williams Catalogue P82-107 10/08/2009 10:53 Page 144

Page 2: Trailer Bodywork · (FOR TRAILERS MANUFACTURED BEFORE APRIL 2008) BOX VAN MODELS LIVESTOCK MODELS * * * Denotes trailer model illustrated (H/R = headroom) HB510 Double horsebox HB403

Trailer BodyworkInspection Doors

Page145

KS2206/3 Inspection door kit. Fits horsebox models HB401, 505 & 510 (aluminium faced board) Green.

KS2206/4 Inspection door kit. Fits horsebox models HB401, 505 & 510 (aluminium faced board) Red.

KS2206/6 Inspection door kit. Fits horsebox models HB401, 505 & 510 (aluminium faced board) Blue.

KS2206/8 Inspection door kit. Fits horsebox models HB401, 505 & 510 (aluminium faced board) Black.

AS0532 Inspection door frame. Fits horsebox models HB401, 505 & 510.

HORSEBOX MODELS HB401, HB505, & HB510(FOR TRAILERS MANUFACTURED BEFORE APRIL 2008)

BOX VAN MODELS

LIVESTOCK MODELS

*

*

* Denotes trailer model illustrated(H/R = headroom)

HB510 Double horsebox

HB403

DP120 12' with optional large cross divisions fitted

KS2213 Inspection door kit. Fits box van model BV84 (5’ H/R).

KS2212 Inspection door kit. Fits box van model BV126 (7’ H/R).

KS2207 Inspection door kit. Fits box van models BV85 & BV105 (6’ H/R).

KS2200 Inspection door kit. Upper & lower livestock inspection door (Pre 1997) Fits all models.

KS2201 Inspection Door Kit. Upper livestock Inspection door (Pre 1997)Fits all models.

KS2202 Inspection Door Kit. Lower livestock inspection door (Pre 1997)Fits all models.

KS2225 Inspection door kit. Upper and lower doors. DP120G (1997 Onwards).

KS2220 Inspection Door Kit. Upper and lower doors. TA5G & TA510G. (1997 Onwards).

KS2221 Inspction Door Kit. Upper door TA5G & TA510G (1997 Onwards).

KS2222 Inspection Door Kit. Lower door TA5G & TA510G (1997 Onwards).

KS30701 Inspection Door kit. To suit the HB403, HB506 & HB511 Silver.Can be fitted to either left or right hand side option. Includes hinges and lock mechanism.

KS30704 Inspection Door kit. To suit the HB403, HB506 & HB511 Red.Can be fitted to either left or right hand side option. Includes hinges and lock mechanism.

KS30706 Inspection Door kit. To suit the HB403, HB506 & HB511 Blue.Can be fitted to either left or right hand side option. Includes hinges and lock mechanism.

KS30708 Inspection Door kit. To suit the HB403, HB506 & HB511 Black. Can be fitted to either left or right hand side option.

KS307012 Inspection Door kit. To suit the HB403, HB506 & HB511 Black. Can be fitted to either left or right hand side option. Includes hinges and lock mechanism.

HORSEBOX MODELS HB403, HB506 & HB511 (FOR TRAILERS MANUFACTURED AFTER APRIL 2008)

KS22065-1 Inspection Door Kit. To suit the HB505 & HB510 Classic Silver. Complete with all fittings.

KS22065-8 Inspection Door Kit. To suit the HB505 & HB510 Classic Black. Complete with all fittings.

AS0534 Inspection Door Frame. To suit the Classic lockable inspection door.

P1066 Paddle Latch. External & Internal locking mechanism, includes 2 keys. Used on the Classic Inspection Door.

C00272 Latch Keep. For the internal lock mechanism.

C70322 Latch Cover. Plastic cover for the internal mechanism.

CLASSIC LOCKABLE INSPECTIONDOORS (HB510, HB505 PRE APRIL 2008)

*

8. IWT Catalogue'09 P130-151_Ifor Williams Catalogue P82-107 10/08/2009 10:53 Page 145

Page 3: Trailer Bodywork · (FOR TRAILERS MANUFACTURED BEFORE APRIL 2008) BOX VAN MODELS LIVESTOCK MODELS * * * Denotes trailer model illustrated (H/R = headroom) HB510 Double horsebox HB403

Page146

Trailer BodyworkHorsebox Coated Panels

CP002571 Silver aluminium coated side panel HB511.2206mm x 1405mm x 12mm.

CP002574 Red aluminium coated side panel HB511. 2206mm x 1405mm x 12mm.

CP002576 Blue aluminium coated side panel HB511. 2206mm x 1405mm x 12mm.

CP002578 Black aluminium coated side panel HB511. 2206mm x 1405mm x 12mm.

CP0025712 Graphite aluminium coated side panel HB511. 2206mm x 1405mm x 12mm.

CP002561 Silver aluminium coated side panel HB506/HB403.1992mm x 1405mm x 12mm.

CP002564 Red aluminium coated side panel HB506/HB403.1992mm x 1405mm x 12mm.

CP002566 Blue aluminium coated side panel HB506/HB403.1992mm x 1405mm x 12mm.

CP002568 Black aluminium coated side panel HB506/HB403.1992mm x 1405mm x 12mm.

CP0025612 Graphite aluminium coated side panel HB506/HB403.1992mm x 1405mm x 12mm.

CP002671 Silver aluminium coated front left hand panel HB511.With cut out for inspection door & window.

CP002674 Red aluminium coated front left hand panel HB511.With cut out for inspection door & window

CP002676 Blue aluminium coated front left hand panel HB511.With cut out for inspection door & window.

CP002678 Black aluminium coated front left hand panel HB511.With cut out for inspection door & window.

CP0026712 Graphite aluminium coated front left hand panel HB511.With cut out for inspection door & window.

CP002641 Silver aluminium coated front left hand panel HB506/HB403.With cut out for inspection door & window.

CP002644 Red aluminium coated front left hand panel HB506/HB403.With cut out for inspection door & window.

CP002646 Blue aluminium coated front left hand panel HB506/HB403.With cut out for inspection door & window.

CP002648 Black aluminium coated front left hand panel HB506/HB403.With cut out for inspection door & window.

CP0026412 Graphite aluminium coated front left hand panel HB506/HB403.With cut out for inspection door & window.

CP002681 Silver aluminium coated front right hand panel HB511. With cut out for inspection door & window.

CP002684 Red aluminium coated front right hand panel HB511. With cut out for inspection door & window.

CP002686 Blue aluminium coated front right hand panel HB511. With cut out for inspection door & window.

CP002688 Black aluminium coated front right hand panel HB511. With cut out for inspection door & window.

CP0026812 Graphite aluminium coated front right hand panel HB511. With cut out for inspection door & window.

CP002651 Silver aluminium coated front right hand panel HB506/HB403. With cut out for inspection door & window.

CP002654 Red aluminium coated front right hand panel HB506/HB403. With cut out for inspection door & window.

CP002656 Blue aluminium coated front right hand panel HB506/HB403. With cut out for inspection door & window.

CP002658 Black aluminium coated front right hand panel HB506/HB403. With cut out for inspection door & window

CP0026512 Graphite aluminium coated front right hand panel HB506/HB403.With cut out for inspection door & window

HB403, HB506 & HB511(FOR TRAILERS MANUFACTURED AFTER APRIL 2008)

CP002691 Silver aluminium coated inspection door panel HB511/HB506/ HB403. Can be fitted to either left or right hand options.

CP002694 Red aluminium coated inspection door panel. HB511/HB506/ HB403. Can be fitted to either left or right hand options.

CP002696 Blue aluminium coated inspection door panel HB511/HB506/ HB403. Can be fitted to either left or right hand options.

CP002698 Black aluminium coated inspection door panel HB511/HB506/ HB403. Can be fitted to either left or right hand options.

CP0026912 Graphite aluminium coated inspection door panel HB511/HB506/HB403. Can be fitted to either left or right hand options.

CP002591 Silver aluminium coated front ramp panel HB511.1145mm x 1525mm x 18mm.

CP002594 Red aluminium coated front ramp panel HB511.1145mm x 1525mm x 18mm.

CP002596 Blue aluminium coated front ramp panel HB511.1145mm x 1525mm x 18mm.

CP002598 Black aluminium coated front ramp panel HB511.1145mm x 1525mm x 18mm.

CP0025912 Graphite aluminium coated front ramp panel HB511.1145mm x 1525mm x 18mm.

CP002581 Silver aluminium coated front ramp panel HB506/HB403.988mm x 1525mm x 18mm.

CP002584 Red aluminium coated front ramp panel HB506/HB403.988mm x 1525mm x 18mm.

CP002586 Blue aluminium coated front ramp panel HB506/HB403.988mm x 1525mm x 18mm.

CP002588 Black aluminium coated front ramp panel HB506/HB403.988mm x 1525mm x 18mm.

CP0025812 Graphite aluminium coated front ramp panel HB506/HB403.988mm x 1525mm x 18mm.

CP002621 Silver aluminium coated rear ramp panel HB511.1651mm x 1525mm x 18mm.

CP002624 Red aluminium coated rear ramp panel HB511.1651mm x 1525mm x 18mm.

CP002626 Blue aluminium coated rear ramp panel HB511.1651mm x 1525mm x 18mm.

CP002628 Black aluminium coated rear ramp panel HB511.1651mm x 1525mm x 18mm.

CP0026212 Graphite aluminium coated rear ramp panel HB511.1651mm x 1525mm x 18mm.

CP002611 Silver aluminium coated rear ramp panel HB506.1523mm x 1525mm x 18mm.

CP002614 Red aluminium coated rear ramp panel HB506.1523mm x 1525mm x 18mm.

CP002616 Blue aluminium coated rear ramp panel HB506.1523mm x 1525mm x 18mm.

CP002618 Black aluminium coated rear ramp panel HB506.1523mm x 1525mm x 18mm.

CP002612 Graphite aluminium coated rear ramp panel HB506.1523mm x 1525mm x 18mm.

CP002601 Silver aluminium coated rear ramp panel HB403.1149mm x 1525mm x 18mm.

CP002604 Red aluminium coated rear ramp panel HB403.1149mm x 1525mm x 18mm.

CP002606 Blue aluminium coated rear ramp panel HB403.1149mm x 1525mm x 18mm.

CP002608 Black aluminium coated rear ramp panel HB403.1149mm x 1525mm x 18mm.

CP0026012 Graphite aluminium coated rear ramp panel HB403.1149mm x 1525mm x 18mm.

APPLIES TO ALL

ON THIS PAGE

8. IWT Catalogue'09 P130-151_Ifor Williams Catalogue P82-107 10/08/2009 10:53 Page 146

Page 4: Trailer Bodywork · (FOR TRAILERS MANUFACTURED BEFORE APRIL 2008) BOX VAN MODELS LIVESTOCK MODELS * * * Denotes trailer model illustrated (H/R = headroom) HB510 Double horsebox HB403

Trailer BodyworkHorsebox Coated Panels

Page147

APPLIES TO ALL

ON THIS PAGE

C992203 Coated panel. 1525 x 1145mm green aluminium coated HB510 front ramp panel.

C992204 Coated panel.1525 x 1145mm red aluminium coated panel - HB510 front ramp.

C992206 Coated panel.1525 x 1145mm blue aluminium coated panel - HB510 front ramp.

C992208 Coated panel. 1525 x 1145mm black aluminium coated HB510 front ramp panel.

C9922012 Coated panel. 1525 x 1145mm graphite aluminium coated panel – HB510 front ramp.

C992211 Coated panel.1525 x 1098mm. Silver aluminium coated HB401 rear ramp panel.

C992213 Coated panel.1525 x 1098mm green aluminium coated panel - HB401 rear ramp.

C992214 Coated panel.1525 x 1098mm red aluminium coated panel - HB410 rear ramp.

C992216 Coated panel.1525 x 1098mm blue aluminium coated panel - HB401 rear ramp.

C992218 Coated panel. 1525 x 1098mm black aluminium coated panel – HB401 rear ramp.

C992381 Coated panel. 1525 x 988mm silver aluminium coated panel – HB505 / HB401 front ramp.

C992383 Coated panel.1525 x 988mm green aluminium coated panel - HB505 / HB401 front ramp.

C992384 Coated panel.1525 x 988mm red aluminium coated panel - HB505 / HB401 front ramp.

C992386 Coated panel.1525 x 988mm blue aluminium coated panel - HB505 / HB401 front ramp.

C992388 Coated panel.1525 x 988mm black aluminium coated panel - HB505 / HB401 front ramp.

C9923812 Coated panel. 1525 x 988mm graphite aluminium coated panel – HB505 / HB401 front ramp.

C992391 Coated panel. 1513 x 1525 silver aluminium coated panel – HB505 rear ramp.

C992393 Coated panel.1513 x 1525mm green aluminium coated panel - HB505 rear ramp.

C992394 Coated panel.1513 x 1525mm red aluminium coated panel - HB505 rear ramp.

C992396 Coated panel.1513 x 1525mm blue aluminium coated panel - HB505 rear ramp.

C992398 Coated panel.1513 x 1525mm black aluminium coated panel - HB505 rear ramp.

C9923912 Coated panel. 1513 x 1525 graphite aluminium coated panel – HB505 rear ramp.

C992551 Coated panel. 1525 x 1620mm silver aluminium coated panel – HB510 rear ramp.

C992553 Coated panel.1525 x 1620mm green aluminium coated panel - HB510 rear ramp.

C992554 Coated panel.1525 x 1620mm red aluminium coated panel - HB510 rear ramp.

C992556 Coated panel.1525 x 1620mm blue aluminium coated panel - HB5010 rear ramp.

C992558 Coated panel. 1525 x 1620mm black aluminium coated panel – HB510 rear ramp.

C9925512 Coated panel. 1525 x 1620mm graphite aluminium coated panel – HB510 rear ramp.

C992051 Coated panel. 1525 x 2292mm Silver aluminium coated panel - HB510 side.

C992053 Coated panel.1525 x 2292mm green aluminium coated panel - HB510 side.

C992054 Coated panel.1525 x 2292mm red aluminium coated panel - HB510 side.

C992056 Coated panel.1525 x 2292mm blue aluminium coated panel - HB510 side.

C992058 Coated panel. 1525 x 2292mm Black aluminium coated panel – HB510 side.

C9920512 Coated panel. 1525 x 2292mm graphite aluminium coated panel – HB510 side.

C992061 Coated panel. 604 x 1434mm Silver aluminium coated inspection door panel.

C992061SL Coated panel.604 x 1434mm silver aluminium coated panel – Classic inspection door ( lockable)

C992063 Coated panel.604 x 1434mm green aluminium coatedpanel - horsebox inspection door.

C992064 Coated panel.604 x 1434mm red aluminium coated panel - horsebox inspection door.

C992066 Coated panel.604 x 1434mm blue aluminium coated panel - horsebox inspection door.

C992068 Coated panel.604 x 1434mm black aluminium coated panel - Horsebox inspection door.

C9920612SL Coated panel. 604 x 1434mm graphite aluminium coated panel – Classic inspection door (lockable).

C992071 Coated panel. 600 x 1525mm. Silver aluminium coated panel. HB510 front left hand panel.

C992073 Coated panel.600 x 1525mm green aluminium coated panel - HB510 front lefthand panel.

C992074 Coated panel.600 x 1525mm red aluminium coated panel - HB510 front left hand panel.

C992076 Coated panel.600 x 1525mm blue aluminium coated panel - HB510 front lefthand panel.

C992078 Coated panel. 600 x 1525mm. Black aluminium coated panel. HB510 front left hand panel.

C9920712 Coated panel. 600 x 1525mm graphite aluminium coated panel – HB510 front left hand panel.

C992081 Coated panel.445 x 1525mm. Silver aluminium coated panel. HB505 front left hand panel.

C992083 Coated panel.445 x 1525mm green aluminium coated panel - HB505 front lefthand panel.

C992084 Coated panel.445 x 1525mm red aluminium coated panel - HB505 front lefthand panel.

C992086 Coated panel.445 x 1525mm blue aluminium coated panel - HB505 front lefthand panel.

C992088 Coated panel.445 x 1525mm black aluminium coated panel - HB505 front lefthand panel.

C9920812 Coated panel. 445 x 1525mm graphite aluminium coated panel – HB505 front left hand panel.

C992161 Coated panel. 1525 x 2073mm silver aluminium coated.HB505 side panel.

C992163 Coated panel.1525 x 2073mm green aluminium coated side panel - HB505 side.

C992164 Coated panel.1525 x 2073mm red aluminium coated panel - HB505 side.

C992166 Coated panel.1525 x 2073mm blue aluminium coated panel - HB505 side.

C992168 Coated panel.1525 x 2073mm black aluminium coated panel - HB505 side.

C9921612 Coated panel. 1525 x 2073mm graphite aluminium coated panel – HB505 side.

C992201 Coated panel. 1525 x 1145mm silver aluminium coated HB510 front ramp panel.

HB401, HB505 & HB510(TRAILERS MANUFACTURED BEFORE APRIL 2008)

HB510 double horsebox

8. IWT Catalogue'09 P130-151_Ifor Williams Catalogue P82-107 10/08/2009 10:53 Page 147

Page 5: Trailer Bodywork · (FOR TRAILERS MANUFACTURED BEFORE APRIL 2008) BOX VAN MODELS LIVESTOCK MODELS * * * Denotes trailer model illustrated (H/R = headroom) HB510 Double horsebox HB403

Page148

Trailer BodyworkBody panels, roof channels,

roof sheets & flooring

C69530B Deck panel. TA5G Front 622mm x 1543mm x 18mm.C69531B Deck panel. TA5G Middle 585mm x 1537mm x 18mm.C69532B Deck panel. TA5G Rear 432mm x 1537mm x 18mm.C69533B Deck panel. TA510G Front 622mm x 1772mm x 18mm.C69534B Deck panel. TA510G Middle 585mm x 1772mm x 18mm.C69535B Deck panel. TA510G Rear 432mm x 1772mm x 18mm.C69536B Deck panel.DP120G Front 622mm x 1875mm x 18mm.C69537B Deck panel.DP120G Middle 585mm x 1867mm x 18mm.C69538B Deck panel. DP120G Rear 432mm x 1867mm x 18mm.

WOODEN REMOVABLE LIVESTOCKDECK PLY PANELS (Pre 1997)

Phenolic resin coated plywood panel with a smooth finish on one side and awire finish on the other C61615 Profiled ply floor.BV64EC695074B GD64 Metric. 1245mm x 1885mm x 18mm.C695073B GD84 Metric. 1245mm x 2500mm x 18mm.C69507B GD85 Metric. 1570mm x 2500mm x 18mm.C695071B GD105 Metric. 1570mm x 3115mm x 18mm.C695072B GD125 Metric. 1570mm x 3730mm x 18mm.C695051B GD106 Metric. 1675mm x 3115mm x 18mm.C695052B GD126 Metric. 1765mm x 3730mm x 18mm.C69501B LM/LT 6/P6E. 1220mm x 1965mm x 18mm.C69513B GD84 Imperial. 1220mm x 2440mm x 18mm.C69512B GD85 Imperial. 1525mm x 2440mm x 18mm.C69591B GH94. 1220mm x 2745mm x 24mm.C695675B GH1054BT. 1616mm x 2490mm x 21mm.C695676B GH1054BT – Rear. 1616mm x 490mm x 21mm.C69592B GH94+3 & GH94BT. 1300mm x 2745mm x 24mmC69510B GP6 Range. Can also be used to replaced wooden floor panels

on the HB505 & HB510. 1525mm x 1774mm x 21mm.C695102B GP126 Rear section. 1774mm x 597mm x 21mm.C695081B GX84. 1250mm x 2425mm x 18mm.C69566B GX105.3025mm x 1575mm x 21mm.C69567B GX106N. 3025mm x 1775mm x 21mm.C695672B Used on GP146. 2750mm x 1775mm x 21mm.C69568B GX106. 3025mm x 1840mm x 21mm.C69569B GX126. 3675mm x 1840mm x 21mm.C60932 1 piece ply floor. TT85G/LT85G.C60933 1 piece ply floor. LT105G.C60934 1 piece ply floor. LT125G.C60987 1 piece ply floor. TT105G.C60966 1 piece ply floor. BV85G.C60969 1 piece ply floor. BV105G.

FLOORING PANELS

APPLIES TO ALL

ON THIS PAGE

TREADPLATE SHEETS

C49490 Treadplate. TA510G 12’ 1765mm x 3650mm x 2mm.C49490B Treadplate.GP126, GP126H 1765mm x 3725mm x 2mm.C49500 Treadplate. TA510G 14’, GP146 1765mm x 4340mm x 2mm.C49486 Treadplate.DP/LM 10’ 1960mm x 2990mm x 2mm.KX35313 Treadplate. GH94 1200mm x 2745mm x 2mm.KX35325 Treadplate. GH94BT.KX35324 Treadplate. GH1054BT.C49485 Treadplate. TT126G DP/LM 12’ 1960mm x 3600mm. C49489 Treadplate. DP / LM 14’ 1960mm x 4215mm x 2mm.C49488 Treadplate. LT105G / TT105G 1635mm x 2990mm x 2mm.C49545 Treadplate. GD85 Metric 1570mm x 2500mm x 2mm.C49546 Treadplate. GD105 Metric 1570mm x 3115mm x 2mm.C495465 Treadplate.GD125 Metric 1570mm x 3730mm x 2mm.C494932 Treadplate. GX84 1250mm x 2425mm x 2mm.C494871 Treadplate. GX105 1575mm x 3025mm x 2mm.C494851 Treadplate. GX106 1840mm x 3025mm x 2mm.C494852 Treadplate. GX126 1840mm x 3675mm x 2mm.C49491B Treadplate. GP106 1765mm x 3110mm x 2mm.C49490B Treadplate. GP126 1765mm x 3725mm x 2mm.C49500 Treadplate. GP146 1765mm x 4340mm x 2mm.

LIVESTOCK BODY PANELSC49116 Livestock vents. Pre 1997 559mm x 105mm x 2mm.C48990 Livestock vents. Current type 560mm.C49060 Bottom front panel. TA5G.C49070 Top front panel. TA5G 6’ headroom.C49114 Top front panel. TA5G 7’ headroom.C49061 Bottom front panel. TA510G.C49071 Top front panel. TA510G 6’ headroom.C49113 Top front panel. TA510G 7’ headroom.C49062 Bottom front panel. DP120G.C49072 Top front panel. DP120G.C44774 Livestock side panel. 6’ (1879.5mm).C44776 Livestock side panel. 8’ (2495.5mm). C44780 Livestock side panel. 10’ (3111.5mm).C44784 Livestock side panel. 12’ (3727.5mm).C44788 Livestock side panel. 14’ (4343mm).

ROOF CHANNELSC19322 Roof channel. P6G/P8G.C19314 Roof channel. TA5G 6’ headroom.C19306 Roof channel. TA5G 7’ headroom.C19309 Roof channel. TA510G 6’ headroom.C19302 Roof channel. TA510G 7’ headroom.C19307 Roof channel. DP120G.C19346 Roof channel. HB401.C19303 Roof channel. HB505.C19345 Roof channel. HB510XL, HB510.C19353 Roof channel. HB610.

LIVESTOCK ROOF SHEETSC14705 White roof sheet. TA5 8’ – 2 per trailer.C14706 White roof sheet. TA5 10’ – 2 per trailer.C14707 White roof sheet. TA5 12’ – 2 per trailer.C14710 White roof sheet. TA510G 10’ – 2 per trailer.C14711 White roof sheet. TA510G 12’ – 2 per trailer.C14712 White roof sheet. TA510G 14’ – 2 per trailer.C14715 White roof sheet. DP120G 10’ – 2 per trailer.C14716 White roof sheet. DP120G 12’ – 2 per trailer.C14717 White roof sheet. DP120G 14’ – 2 per trailer.C14773 Centre roof sheet. 7’ Headroom 10’ long – 1 per trailer.C14760 Centre roof sheet. 7’ Headroom 12’ long – 1 per trailer.C14720 Centre roof sheet. 7’ Headroom 14’ Long – 1 per trailer.

HORSEBOX ROOF SHEETS & FRONT PANELS (FOR TRAILERS MANUFACTURED BEFORE APRIL 2008)

C49278 White aluminium roof sheet. HB401.C49278-SVR Silver aluminium roof sheet. HB401.C49275 White aluminium roof sheet. HB505.C49275-SVR Silver aluminium roof sheet. HB505.C49270 White aluminium roof sheet. HB510.C49270-SVR Silver aluminium roof sheet. HB510.C40542 Front panel. Stucco aluminium HB401.C40541 Front panel. Stucco aluminium HB505.C40540 Front panel. Stucco aluminium HB510.

C49502 Treadplate. P5E 1020mm x 1520mm x 2mm.C49505 Treadplate. P6E 1219mm x 1965mm x 2mm.C49506 Treadplate. P7E 1219mm x 2195mm x 2mm.C49497B Treadplate. TT85G/TA5G 8’ 1535mm x 2495mm x 2mm.C49496B Treadplate. TA5G 10’ 1535mm x 3110mm x 2mm.C49495B Treadplate. TA5G 12’ 1535mm x 3725mm x 2mm.C49491B Treadplate. TA510G 10’, GP106 1765mmx 3110mm x 2mm.

8. IWT Catalogue'09 P130-151_Ifor Williams Catalogue P82-107 10/08/2009 10:53 Page 148

Page 6: Trailer Bodywork · (FOR TRAILERS MANUFACTURED BEFORE APRIL 2008) BOX VAN MODELS LIVESTOCK MODELS * * * Denotes trailer model illustrated (H/R = headroom) HB510 Double horsebox HB403

C85000 Rubber seal. Used on canopies between canopy base and vehicle side. Priced per metre.

P1300 Door Seal. Used on front upper doors. HB401 & HB505. Priced per metre.

P1300-1036 Door Seal. Used on front upper door HB403, HB506. Cut to correct length.

P1300-1193 Door Seal. Used on front upper door. HB511. Cut to correct length.

P1301 Door Seal. Used on front upper door HB510. Priced per metre.

P1304 Door seal. Used on all horsebox front and rear ramps, rear upperdoors & HB401, 505 & 510 inspection doors. Priced per metre.

P1311 Beading. Used on HB401, 505 & 510 rear light brackets and the upper rear doors (vertical). Priced per metre.

P1317 Adhesive foam. 25mm wide 10mm thick. Priced per metre.

P1318 Adhesive foam. 19mm wide 10mm thick. Priced per metre.

P1319 Adhesive foam. 15mm wide 4mm thick. Used on Box van inspection doors and rear van doors. Priced per metre

P1326 Glazing Rubber. Used on horsebox front and side fixed windows and canopy rear aluminium doors. Priced per metre.

P1327 Filler Strip. Holds the rubber securely in place. Priced per metre.

P1802 Door Seal. Used on the HB403, 506 & 511 inspection door. Priced per metre

P1322 Roof Channel Cover. HB510, HB510XL & HB610 White snap in plastic 6334mm.

P1322/ Roof Channel Cover. HB510 Black snap in plastic 6334mm.BLACK

P1323 Roof Channel Cover. HB505 White snap in plastic 5905mm.

P1323/ Roof Channel Cover. HB505 Black snap in plastic 5905mm.BLACK

P1324 Roof Channel Cover. HB401 White snap in plastic 5488mm.

P1324/ Roof Channel Cover. HB401 Black snap in plastic 5488mm.BLACK

ET00078-01200 Rear pillar capping. HB403,506 & 511.

ET00078-01600 Front pillar capping. HB403, 506 & 511.

P1194 End cap. Used on the tipper locking handles and the older horsebox ramp handles.

P1226 Turn button. As used on many older livestock trailers to secure the vent flaps.

P1225 Receiver. Bath tub shaped receiver for spring bolts on many older livestock trailers.

P1229 Spring bolt Receiver. Used within older livestock trailers and the P6E / P7E livestock canopies to secure cross division spring bolts.

P1230 Plastic hinge. As used on many older livestock trailers on the vent flaps.

P1231 End plug. 20 x 20 x 1.5 square section end plug.

P1232 End plug. 50 x 25 x 1.5 rectangular section end plug.

P1238 End plug. 60 x 40 x 2 rectangular section end plug.

P1233 End plug. for 25mm nominal bore medium tube.

P1235 End cap. for springbolt pins.

P1245PK Deck Cleat. Secured to the sides of the livestock trailers. Used to hold open the current vents. Pk 10.

C75363 Capping Insert. Used in the ramp side gates vertical extrusions.

C89200 Hinge. Rubber hinge extrusion used on livestock trailer vents.

C15001 Edging. Floor edging strip for LT/LM 6 series.

C15002 Edging. Floor edging for LM/LT 5’6’’

C15004 Edging. Floor edging for LM/LT 5’

C15005 Edging. Floor edging for GD4 / P6E

3

9

10

11

12

14

15

16

17

2

3

4

5

7

4

9

12

17

1516

14

5

1

2

6

6

7

8

8

13

18

131018

Trailer BodyworkSeals & Cappings

Page149

1

11

8. IWT Catalogue'09 P130-151_Ifor Williams Catalogue P82-107 10/08/2009 10:53 Page 149

Page 7: Trailer Bodywork · (FOR TRAILERS MANUFACTURED BEFORE APRIL 2008) BOX VAN MODELS LIVESTOCK MODELS * * * Denotes trailer model illustrated (H/R = headroom) HB510 Double horsebox HB403

Page150

Trailer BodyworkGRP wind deflectors & roof sheets

1

1

2

2

3

3

5

5

C72440 GRP roof section. HB401R.

C72420 GRP roof section. HB505R (pre 1992 model) White .

C72421 GRP roof section. HB505R (1992 onwards) White .

C72430 GRP roof section. HB510 White .

C72440/ GRP roof section. HB401 ‘Classic’ (Silver finish).SILVER

C72421/ GRP roof section. HB505 ‘Classic’ (Silver finish).SILVER

C72430/ GRP roof section. HB510 ‘Classic’ (Silver finish).SILVER

C72162 GRP roof moulding. BV64E.

C72054 GRP nose section. TA5G 6'H/R.

C72055 GRP nose section. TA5G 7'H/R.

C72052 GRP nose section. TA510G 6'H/R.

C72053 GRP nose section. TA510G 7'H/R.

C72050 GRP nose section. DP120G 6'H/R.

C72056 GRP storage nose section. HB610.

C72049 GRP storage nose version. HB510XL.

KX0655 GRP Hardtop addition. P5E.

C79305 Opal boxvan roof sheet. 2870 x 1160 x 1.3mm. (BV84).

C79306 Opal boxvan roof sheet. 2960 x 1470 x 1.3mm. (BV85).

C79307 Opal boxvan roof sheet. 3570 x 1470 x 1.3mm. (BV105).

C79308 Opal boxvan roof sheet. 4250 x 1710 x 1.3mm. (Can be cut to fit the following trailers BV125, BV106 & BV126).

APPLIES TO ALL

ON THIS PAGE

4

4

8. IWT Catalogue'09 P130-151_Ifor Williams Catalogue P82-107 10/08/2009 10:53 Page 150

Page 8: Trailer Bodywork · (FOR TRAILERS MANUFACTURED BEFORE APRIL 2008) BOX VAN MODELS LIVESTOCK MODELS * * * Denotes trailer model illustrated (H/R = headroom) HB510 Double horsebox HB403

Trailer BodyworkGlazing & Ventilation

Page151

P1212 Sliding window. Type fitted to Horsebox models.

P1213 Safety glass. Safety glass 360 x 230mm Approx, as fitted to horseboxes.

P1214 Safety glass. Safety glass 610 x 305mm Approx, as fitted to canopy tailgates.

CP00304 Front window. HB403, HB506 & HB511.

P1326 Glazing rubber. As used on horsebox front windows, requires filler strip to finish.*

P1327 Filler strip. Holds the glass securely in place within the main rubber.*

B0037 Sealer gun. Accepts any of our coloured silicon or polyurethane sealants

B0153 Sealer hansil GP clear. Silicon elastomer sealant colourless.

P1202 Vent. As used in the roof of the HB401, HB403, HB505 & HB510Black lid with a silver frame.

P1203 Vent. As used in the roof of the containers, HB510XL, HB610 & the P6E /P7E Canopy. Black lid and frame.

1

1

2

3

6

5

7

8

2

3

4

5

6

7

8

9

9

HB510XL large horsebox

See page 33 formore colouredsealant options!

4

8. IWT Catalogue'09 P130-151_Ifor Williams Catalogue P82-107 10/08/2009 10:53 Page 151

Page 9: Trailer Bodywork · (FOR TRAILERS MANUFACTURED BEFORE APRIL 2008) BOX VAN MODELS LIVESTOCK MODELS * * * Denotes trailer model illustrated (H/R = headroom) HB510 Double horsebox HB403

Page152

Trailer BodyworkLighting brackets & Protection Plates

AS4990 Light bracket. GD trailer range RH. (Not metric GD).

AS4991 Light bracket. GD trailer range LH. (Not metric GD).

AS3112 Rear Pillar. Right hand corner pillar GD Metric.

AS3113 Rear Pillar. Left hand corner pillar GD Metric.

AS3114 Light Bracket. Right hand GD Metric.

AS3115 Light Bracket. Left hand GD Metric.

AS4994 Corner post. Front corner post for the GD trailer range RH.

AS4995 Corner post. Front corner post for the GD trailer range LH.

C10199 Lighting plate. LT/LM 85, Pre punched and formed rear lighting plate.

C10200 Lighting plate. LT/LM 5 Series, Pre punched and formed rear lighting plate (not LT/LM85).

C10201 Lighting plate. LT/LM 6 Series, Pre punched and formed rear lighting plate.

C11280 Lighting plate. HB401, 505 & 510 Right hand light plate.

C11281 Lighting plate. HB401, 505 & 510 Left hand light plate.

C12035 Rear lighting plate DP120S. Sealed floor.

C14153 Rear foot plate RH 10’ Livestock.

C14154 Rear foot plate LH 10’ Livestock.

C14155 Rear foot plate RH 12’ Livestock.

C14156 Rear foot plate LH 12’ Livestock.

C14157 Rear foot plate RH 14’ Livestock.

C14158 Rear foot plate LH 14’ Livestock.

C14159 Rear foot plate RH 14’ Livestock Tri Axle.

C14160 Rear foot plate LH 14’ Livestock Tri Axle.

C14244 Mudguard inspection step 12’ Livestock.

C10308 Rear protection bracket RH BV84G.

C10309 Rear protection bracket LH BV84G.

C10335 Rear protection bracket RH BV85G.

C10336 Rear protection bracket LH BV85G.

C10337 Rear protection bracket RH BV105G.

C10338 Rear protection bracket LH BV105G.

C10364 Rear protection bracket RH BV125G.

C10365 Rear protection bracket LH BV125G.

C10215 Rear protection bracket RH BV106G.

C10216 Rear protection bracket LH BV106G.

C10266 Rear protection bracket RH BV126G.

C10267 Rear protection bracket LH BV126G.

C11400 Footplate. RH HB401 & 505 models.

C11401 Footplate. LH HB401 & 505 models.

C11403 Footplate. RH HB510.

C11404 Footplate. LH HB510.

C11407 Footplate. Right hand Classic HB505.

C11408 Footplate. Left hand Classic HB505.

C11412 Footplate. Right hand Classic HB510.

C11413 Footplate. Left hand Classic HB510.

HB401/505/510 lighting bracket

GX106 with skids and integrated rear supports

1

1

3

2

3

4

4

5

5

7

6

7

2

6

9. IWT Catalogue'09 P152-163_Ifor Williams Catalogue P82-107 10/08/2009 10:56 Page 152

Page 10: Trailer Bodywork · (FOR TRAILERS MANUFACTURED BEFORE APRIL 2008) BOX VAN MODELS LIVESTOCK MODELS * * * Denotes trailer model illustrated (H/R = headroom) HB510 Double horsebox HB403

Trailer BodyworkDrawbars

Page

AS7246 Drawbar set. LT/LM85 - complete left and right drawbar assemblies.

AS7232 Drawbar set. LT/LM 5 series - complete left and right drawbar assemblies.

AS7237 Drawbar set. LT/LM 6 Series and DP120 - complete left and right drawbar assemblies.

AS7230 Drawbar set. LT/LM 7 Series - complete left and right drawbar assemblies.

AS0550 Drawbar set. GX84 & GP84GTA. Complete left and right hand assemblies.

AS0540 Drawbar Set. Complete left and right hand side assemblies for the GX85.

AS0570 Drawbar set. Complete right and left hand side assemblies. Used on the GX105, GX105HD, GX125HD, GX106N, GX106 & GX126.

AS7235 Drawbar set. TT105 - complete left and right drawbar assemblies.0

AS7205 Drawbar set. TT126 - complete left and right drawbar assemblies.

C11544 Drawbar. Right hand BV4 & BV5. Used since early 2005.

C11545 Drawbar. Left hand BV4 & BV5. Used since early 2005.

AS0231 Drawbar set. BV106 - complete left and right drawbar assemblies.

AS0232 Drawbar set. BV126G – complete left and right hand drawbar assemblies.

AS7251 Drawbar assembly. complete tilting A frame assembly for CT166 or CT167 trailer (excludes coupling and fittings).

C11816 Drawbar LH. CT136 formed drawbar member.

C11817 Drawbar RH. CT136 formed drawbar member.

AS3705 Drawbar set. CT177 complete left & right hand drawbar assemblies.

KS0640 Drawbar repair set. Used on the DP120 Sealed floor. The kit includes a pair of drawbars, a welded cross member and a coupling mounting platform.

C00023 Cross member. Stiffens the drawbar flange and acts as a breakaway cable guide.

C16165 Drawbar brace. HB505 & 510 RH strap fits onto drawbar to bridge the axle cutout.

C16166 Drawbar brace. HB505 & 510 LH strap fits onto drawbar to bridge the axle cutout.

GX106 with skids and integrated rear supports

Due to the bulky nature of this product, delivery can

only be offered to Ifor Williams distributors Premises.

9. IWT Catalogue'09 P152-163_Ifor Williams Catalogue P82-107 10/08/2009 10:56 Page 153

Page 11: Trailer Bodywork · (FOR TRAILERS MANUFACTURED BEFORE APRIL 2008) BOX VAN MODELS LIVESTOCK MODELS * * * Denotes trailer model illustrated (H/R = headroom) HB510 Double horsebox HB403

Page154

Trailer BodyworkMudguards & Brackets

C00476 Single bracket. Front or rear support bracket for many trailers with tandem mudguards and 13” wheels.

C00477 Single bracket. Front or rear support bracket for many trailers with tandem mudguards and 16” wheels.

12

10

11

12

CP00321 Mudguard twin arch section. Fits both sides. Used on the HB403, HB506 & HB511.

CP00322 Mudguard inner section. Fits both sides. Used on the HB403, HB506 & HB511.

P0603 Single mudguard. For 10” wheel used on P6e models and LT/LM/DP export models (priced per pair).

P0605 Single mudguard. For flotation tyres used on P6e models (priced per pair).

P0606 Single mudguard. Specifically designed for TT126 tipper models (priced per pair).

P0607 Mudguard single. Used on P6E model with 13’’ wheels and all of the Eurolight range.

P0610 Mudguard single. 8’’ wide used on GD84 13’’ & 16’’ wheels, GD84 SA, TA5G 12’, TA510G 12’, TA510G 14’.

P0611 Mudguard single. 7’’ wide used on GD64 13’’wheels, GD85SA, P6G, P8G, BV84SA & BV85SA.

P0612 Tandem mudguard. 8’’ wide used on the GD84TA, GD85, TA5G 8’, BV84G, BV85G, BV105G, BV125G.

P0613 Tandem mudguard. 8’’ wide used on theGD105G, GD125G, GD106G, GD126G, BV106G 12’’ wheels, BV126G 12’’ wheels, & TT105G.

P0614 Tandem mudguard. 8’’ wide used on the TA5G 10 16’’ wheels, TA510G 10’ , BV106G 16’’ wheels, BV126G 16’’ wheels, HB510XL & HB610.

P0619 Tandem mudguard. 7’’wide used on the HB401, HB505 & HB510 from 1998.

P06191 Tandem mudguard. 7” wide as used on horsebox models with lamps on mudguard 1995-1998 (priced per pair).

P0621 Tri-axle mudguard. Used on the TA510G 14’ Tri axle.

C70597 Mudflap. Right hand used on the GX84, GX85, GX105, GX125HD & GX106N.

C70598 Mudflap. Left hand used on the GX84, GX85, GX105, GX125HD & GX106N.

C70595 Mudflap. Right hand used on the GX106 & GX126.

C70596 Mudflap. Left hand used on the GX106 & GX126.

KS3990 Mudflap. For TT85 models (includes hinge and fitting kit).

KX0826 Mudflap Kit. Used on the HB403, HB506 & HB511.

C80370 Mudflap. For GP84GTA models.

C80737 Mudflap. Long mudflap printed with IWT logo. Can be fitted to the LT/LM/CT Range of trailers.

C00473 Centre bracket. Centre support bracket for most tandem mudguards.

5

4

3

1

6

9

10

11

7

5 4

6

3

9

8

Detail of P06191

2

1

2

7

8

13

13

9. IWT Catalogue'09 P152-163_Ifor Williams Catalogue P82-107 10/08/2009 10:56 Page 154


Recommended