TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, …5... · TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG,...

TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, SLIDE AXLE, UTILITY, GOOSENECK, ENCLOSED, ETC.

Vendor Name:

Contact Person:

Street Address:

P.O. Box:

City, State, Zip

Phone #:

Toll Free #:

Fax #:

Email Address:

Spec # Information Requested Answer

1.0MAKE AND MODEL: (see models in Central Trailer Sales PJ Price

list, 03/02/2017)

GVWR

Payload Capacity

Deck Length

Deck Width

Loading Deck Height

Construction

Decking Material

Headboards

Tie Downs

SUSPENSION

Type

Axles

Tires

Wheels

BRAKES

ELECTRICAL WIRING SYSTEM

TONGUE

East Bethel, MN 55011

RESPONDERS MUST USE THIS PRICE PAGE OR RESPONSE MAY BE REJECTEDCentral Trailer SalesBrian Renstrom18661 Hwy 65

763-434-2277

[email protected]

mailto:[email protected]

Style

Main Frame Material

Length

Hitch Type

Safety Chains

Tongue Stand

Loading Ramps

Paint

Warranty (Months/Years) 1 year

BASE UNIT PRICE: $

2.0 LIST AVAILABLE OPTIONS:

2.1 Mn/DOT Wiring and Lighting- Price per specs $150 when not included in standard features

N/A2.2 Long Stroke brake chambers

2.3

2.4

2.5

2.6

3.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES: _______________________0% Discount

4.0 SHOP LABOR RATES4.1 Hourly Labor Rate for Trailer Modifications $75

5.0 HOT DIPPED GALVANIZING:5.1

5.1 Model N/A5.2 Model

Model

List the trailer models and proce to Galvanize each Add lines as needed

6.0 DELIVERY STARTING POINT: CITY, STATE, ZIP East Bethel, MN 55011See Special Terms and Conditions No Flat Rate Allowed

PRICE PER MILE FROM DELIVERY STARTING POINT: $2.50 Minimum Delivery Charge (if any) N/A

Central Trailer Sales,Inc

(763) 434-2277 Table of ContentsProduct Description Page

FS Classic Flatdeck with Singles 2

FD Classic Flatdeck with Duals 4

LS Low-Pro Flatdeck with Singles 6

LD Low-Pro Flatdeck with Duals 8

L3 14" I-Beam Low-Pro with Duals 10

SY Flatdeck with Singles Hydr Dove 12

FY Flatdeck with Hydraulic Dove 14

LY Low-Pro with Hydraulic Dove 16

PT Pipe Hauler 18

L5 Light Duty Deckover 5" Channel 20

L6 Med. Duty Deckover 6" Channel 22

F8 8" I-Beam Deckover 24

PD Classic Pintle with Duals 26

PL Low-Pro Pintle with Duals 28

TM 83" Manual Tilt 30

TH 83" Hydraulic Quick Tilt 32

T1 Single Axle HD Tilt 34

T5 5" Channel Tilt Carhauler 36

T6 6" Channel Equipment Tilt 38

TJ HD Equipment Tilt 6" Channel 40

TF Powered Full Tilt 42

T7 8" Channel Tilt 44

TK HD Equipment Tilt 8" Channel 46

T8 Deckover Tilt 48

T9 HD Deckover Tilt 50

TD Tandem Dual Tilt 52

C1 Single Axle HD Carhauler 54

C4 4" Channel Carhauler 56

C5 5" Channel Carhauler 58

CE 5" Channel Equipment 60

CC 6" Channel Equipment 62

C8 8" Channel Equipment 64

Product Description Page

P6 Angle Pipetop Trailer 66



B5 5" Channel Buggy Hauler 72

B6 6" Channel Super-Wide 74

B8 8" Channel Super-Wide 76

D5 60" Utility Dump 78

D3 72" Tandem Axle Dump 80

D2 78" Medium Duty Dump 82

D7 83" Tandem Axle Dump 84

DH 83" High Side Dump 86

D9 83" XL Dump 88

DC 83" XL High Side Dump 90

DL 83" Low Pro Dump 92

DM 83" Low Pro High Side Dump 94

DJ 83" Low Pro XL Dump 96

DK 83" Low Pro XL High Side Dump 98

DN 84" Deckover Dump 100

D8 96" Deckover Dump 102

DT 10" I-Beam Deckover Dump 104

DS 91" Deckover Dump 106

DD Tandem Dual Dump 108

DR Rollster™ Roll Off Dump 110

A6 60" All-Steel Utility 112

U6 60" Single Axle Channel Utility 114

UC 60" Tandem Axle Channel Utility 116


UJ 72" Tandem Axle Channel Utility 120


UK 77" Tandem Axle Channel Utility 124


UL 83" Tandem Axle Channel Utility 128

Page 1 of 131Printed 02/27/2017


(763) 434-2277 Classic Flatdeck with Singles (FS)

F S R 2 0 7 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

FSR2072BSSK 20' Classic Flatdeck with Singles $6,090.00














Standard Features• 15,680 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• GN 2 5/16" Ball Bulldog Coupler 25,000 lb• Safety Chains• 2 - Drop Leg Jacks (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Monster Steps on Both Sides

• Lockable Front Toolbox w/ Chain Holder• 8' Ramps w/ Holders• 12" x 14 lb. I-Beam Main Frame, Riser & Neck• Frame Bridge Standard on 30' and up.• 3" Channel Crossmembers 16" on Center• 2 x 6 x 1/8" Square Tubing Outer Deck Frame• 2" Treated Pine Lumber Deck• 102" Wide Deck• DOT Approved Flushmount Lifetime LED Lights• Amber Side Turn Flashers• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• 5 year Dexter Axle Warranty

30' and up, upgrade to triple axle recommended 30' and up, upgrade to 19 lb. I-Beam recommended.*** MAX GVWR 24,000 with Triple 8k Axle Option ***

Bumper Pull Tongue Length (6' 9"), Gooseneck Length (8' 9").

Coupler Options:R* GN 2 5/16" Round (25,000 lb.) w/ Toolbox Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) w/Tbx $0.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $220.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $220.00 P 3" Pintle Eye - Face-mount (36,000 lb.) w/Tbx $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $220.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $0.00

* The trailer G.V.W.R. cannot exceed the coupler rating.

Powder Coat Color Options:Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00Primer + Black (Texas) (0) $138.00Primer + Red (Texas) (1) Red (r) $296.00

Desert Tan (t) Primer + Desert Tan (Texas) (8) Primer + Tractor Green (Texas) (2) Primer + White (Texas) (3) Tractor Green (j) White (w)

$338.00

Equipment Yellow (y) Primer + Equipment Yellow (Texas) (4) Primer + Tractor Orange (Texas) (5) Tractor Orange (n)

$355.00

Grey (g) Primer + Grey (Texas) (6) $388.00


Classic Flatdeck with Singles (FS) Options

Axle Options:72BS * (2) 7,000# (Dexter) Electric / Spring Included 72BT (2) 7,000# (Dexter) Electric / Torsion $285.00

72HS (2) 7,000# (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring² $1,518.00

72HT (2) 7,000# (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $1,803.00

73BS (3) 7,000# (Dexter) Electric / Spring $986.00 73BT (3) 7,000# (Dexter) Electric / Torsion $1,414.00



92BS (2) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric / Spring² $443.00

92BT (2) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric / Torsion² $728.00

92HS (2) 7,000# w/235/85R16 LR-G Tires (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring² $1,850.00

92HT (2) 7,000# w/235/85R16 LR-G Tires (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $2,135.00

93BS (3) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric / Spring² $2,048.00

93BT (3) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric / Torsion² $2,078.00



K2BS (2) 8,000# Oil Bath w/215/75R17.5 LR-HSingles(Dexter)Electric / Spring²

$2,488.00

82BS (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter)Electric / Spring² $1,743.00

82BT (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter)Electric / Torsion² $2,505.00

82HS (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring² $3,213.00

82HT (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $3,975.00




Tail Options:S* Straight Deck w/ 8' Slide-in Ramps Incl. A 5' Dovetail w/ 5' Slide-in Ramps $535.00 F 5' Dovetail w/ 2 Flip-over Ramps $453.00 T 5' Dovetail w/ 3 Flip-over Ramps $604.00 W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,224.00 Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $2,911.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 4 Plate for Winch $145.00 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $8.13 / ft 9 Under Frame Tie Down Flat $3.13 / ft A 19 lb. I-Beam Main Frame, Riser & Neck $12.19 / ft B 22 lb. I-Beam Main Frame, Riser & Neck $18.44 / ft C 12"oc Crossmembers $191.25 E Rough Oak Floor $21.25 / ft H Receiver Hitch $76.25 K 4" Ratchets every 4ft w/ Slide Track $27.81 / ft L Side Mount Wood Rack $322.50 P 11ga (1/8") DP Steel Floor w/4 D-Rings & 12"oc $46.25 / ft R Frame Bridging $206.25 S Diamond Plate Ramp Bottoms $145.00 T Torque Tube $12.19 / ft U Deck on the Neck (102" Wide 96" Long) $643.75 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Z Ramp Support Arms $38.75 -BWFL Blackwood Classic Full Deck $31.88 / ft -BWOT Blackwood Classic Outer Deck $18.75 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -DS05 3/16" DP Steel Floor w/4 D-Rings & 12"oc $55.63 / ft -EL01 Add 7-Way RV Plug to Rear Bumper $105.00 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -LT05 Add LED Reverse Lights $145.00 -LT10 Light Bar w/4 Lights $332.50 -RM30 No Ramps No Ramp Pockets -$156.25 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -S201 1 Side-mount Toolbox 45"x17½" $382.50 -S401 1 Side-mount Toolbox 72"x17½" $630.00 -SM02 2 Extra Side Marker Lights, 1 Per Side $67.50 -SP01 Under Frame Spare Tire and Mount $325.00 -TB03 Top Riser Toolbox $385.00

Notes:² Special Order Option: Requires additional confirmation lead-time.



(763) 434-2277 Classic Flatdeck with Duals (FD)

F D R 2 0 A 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

FDR20A2BSSK 20' Classic Flatdeck with Duals $8,580.00















Standard Features• 25,000 lb. G.V.W.R.• 10,000 lb. x 2 G.A.W.R.• GN 2 5/16" Ball Bulldog Coupler 25,000 lb• Safety Chains• 2 - Drop Leg Jacks (10,000 lb.)• 2 - Dexter Oil Bath Brake Axles (10,000 lb.)• 5 Leaf Slipper Spring Suspension• 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern• 8 - 16" 235/80R16 Radial Tires (3,090 lb)• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Monster Steps on Both Sides


25' and up includes 19 lb. I-Beam Frame, Riser & Neck.Pintle hooks must upgrade to 19 lb. I-Beam.

*** MAX GVWR 36,000 on Pintle Coupler with 15k or Triple 12k Axles. ***Bumper Pull Tongue Length (6' 11"), Gooseneck Length (8' 11").

Coupler Options:R* GN 2 5/16" Round (25,000 lb.) w/ Toolbox Incl. E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $353.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $220.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $220.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $220.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $0.00




$338.00


$355.00



Classic Flatdeck with Duals (FD) Options

Axle Options:S2BS (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter)

Electric / Spring² $935.00

S2BT (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter)Electric / Torsion² $2,228.00

S2HS (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring² $3,095.00

A2BA (2) 10,000# Axles (Dexter) Electric / Air Ride² $3,808.00

A2BL (2) 10,000# Axles (Dexter)Electric / Air Ride w/ (1) Lift Axle² $4,730.00

A2BS * (2) 10,000# Axles (Dexter) Electric / Spring Included A2BT (2) 10,000# Axles (Dexter) Electric / Torsion² $1,293.00

A2HA (2) 10,000# Axles (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Air Ride² $5,963.00

A2HS (2) 10,000# Axles (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring² $2,155.00

A3BS (3) 10,000# Axles (Dexter) Electric / Spring $1,956.00


T2BS (2) 10,000# w/235/85R16 LR-G Dual T&W(Dexter)Electric / Spring² $795.00

T2HS (2) 10,000# w/235/85R16 LR-G Dual T&W(Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring² $2,950.00

C2BA (2) 12,000# Axles (Dexter) Electric / Air Ride² $5,293.00

C2BL (2) 12,000# Axles (Dexter)Electric / Air Ride w/ (1) Lift Axle² $6,185.00

C2BS (2) 12,000# Axles (Dexter) Electric / Spring $1,595.00

C2HA (2) 12,000# Axles (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Air Ride² $7,118.00

C2HL (2) 12,000# Axles (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Air Ride w/ (1) LiftAxle²

$8,010.00

C2HS (2) 12,000# Axles (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring $3,420.00



N2HA (2) 12,000# w/215/75R17.5" LR-H Dual T&W (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Air Ride² $8,920.00

D2BS (2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter)Electric / Spring $2,115.00

D2HS (2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring $4,165.00

J2GS (2) 15,000# w/215/75R17.5" LR-H Dual T&W (Dexter)Elec/Hyd Drum (1,000 PSI Pump) / Spring $6,188.00

* Trailers with combined G.A.W.R. of 30,000 lbs or moremust add options B and C

Tail Options:S* Straight Deck w/ 8' Slide-in Ramps Incl. A 5' Dovetail w/ 5' Slide-in Ramps $535.00 E 5' Dovetail w/ 2 Flip-over Ramps w/HD Gusset $560.00 F 5' Dovetail w/ 2 Flip-over Ramps $453.00 J 5' Dovetail w/ 3 Flip-over Ramps w/HD Gusset $769.00 T 5' Dovetail w/ 3 Flip-over Ramps $604.00 W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,224.00 Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $2,911.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 1 Hutch susp. H9700-Underslung Tandem Axle $1,108.75 4 Plate for Winch $145.00 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $8.13 / ft 9 Single Side Under Frame Tie Down Flat $3.13 / ft A 19 lb. I-Beam Main Frame, Riser & Neck $12.19 / ft B 22 lb. I-Beam Main Frame, Riser & Neck $18.44 / ft C 12"oc Crossmembers $191.25 E Rough Oak Floor $21.25 / ft H Receiver Hitch $76.25 K 4" Ratchets every 4ft w/ Slide Track $27.81 / ft L Side Mount Wood Rack $322.50 M 6" Axle Spread (Longer Equalizer) $191.25 N 72" Axle Spread $267.50 P 11ga (1/8") DP Stl Flr w/4D-Rings (Cut Fndrs)

&12"oc$46.25 / ft

R Frame Bridging $206.25 S Diamond Plate Ramp Bottoms $145.00 T Torque Tube $12.19 / ft U Deck on the Neck (102" Wide 96" Long) $643.75 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Z Ramp Support Arms $38.75 -BWFL Blackwood Classic Full Deck $31.88 / ft -BWOT Blackwood Classic Outer Deck $18.75 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -EL01 Add 7-Way RV Plug to Rear Bumper $105.00 -JA01 HD 25k Jost 2x Jacks $571.25 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -LT10 Light Bar w/4 Lights $332.50 -RC01 1 - 38" Center Deck Roller $257.50 -RL01 Straight Deck Rolling Tail Board $995.00 -RM30 No Ramps No Ramp Pockets -$156.25 -RP01 2 - 17" Outer Deck Rollers $397.50 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -S201 1 Side-mount Toolbox 45"x17½" $382.50 -S401 1 Side-mount Toolbox 72"x17½" $630.00 -SM02 2 Extra Side Marker Lights, 1 Per Side $67.50 -TB03 Top Riser Toolbox $385.00




(763) 434-2277 Low-Pro Flatdeck with Singles (LS)

L S R 2 0 7 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

LSR2072BSSK 20' Low-Pro Flatdeck with Singles $6,740.00














Standard Features• 15,680 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• GN 2 5/16" Ball Bulldog Coupler 25,000 lb• Safety Chains• 2 - Drop Leg Jacks (10,000 lb.)• 2 - Dexter E-Z Lube Brake Axles (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Monster Steps on Both Sides


30' and up, upgrade to triple axle recommended.30' and up, upgrade to 19 lb. I-Beam recommended.*** MAX GVWR 24,000 with Triple 8k Axle Option. ***

Gooseneck Length (8' 10")





$338.00


$355.00



Low-Pro Flatdeck with Singles (LS) Options
















$2,488.00








Tail Options:S* Straight Deck w/ 8' Slide-in Ramps Incl. A 5' Dovetail w/ 5' Slide-in Ramps $535.00 F 5' Dovetail w/ 2 Flip-over Ramps $453.00 T 5' Dovetail w/ 3 Flip-over Ramps $604.00 W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,224.00 Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $2,911.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 4 Plate for Winch $145.00 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $8.13 / ft 9 Under Frame Tie Down Flat $3.13 / ft A 19 lb. I-Beam Main Frame, Riser & Neck $12.19 / ft B 22 lb. I-Beam Main Frame, Riser & Neck $18.44 / ft C 12"oc Crossmembers $191.25 E Rough Oak Floor $21.25 / ft H Receiver Hitch $76.25 K 4" Ratchets every 4ft w/ Slide Track $27.81 / ft L Side Mount Wood Rack $322.50 P 11ga (1/8") DP Steel Floor w/4 D-Rings & 12"oc $46.25 / ft R Frame Bridging $206.25 S Diamond Plate Ramp Bottoms $145.00 T Torque Tube $12.19 / ft U Deck on the Neck (102" Wide 96" Long) $643.75 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Z Ramp Support Arms $38.75 -BWFL Blackwood Classic Full Deck $31.88 / ft -BWOT Blackwood Classic Outer Deck $18.75 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -DS05 3/16" DP Steel Floor w/4 D-Rings & 12"oc $55.63 / ft -EL01 Add 7-Way RV Plug to Rear Bumper $105.00 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -LT05 Add LED Reverse Lights $145.00 -LT10 Light Bar w/4 Lights $332.50 -RL01 Straight Deck Rolling Tail Board $995.00 -RM30 No Ramps No Ramp Pockets -$156.25 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -S301 1 Side-mount Toolbox 45"x14" $382.50 -S501 1 Side-mount Toolbox 72"x14" $630.00 -SM02 2 Extra Side Marker Lights, 1 Per Side $67.50 -SP01 Under Frame Spare Tire and Mount $325.00 -TB03 Top Riser Toolbox $385.00




(763) 434-2277 Low-Pro Flatdeck with Duals (LD)

L D R 2 0 A 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

LDR20A2BSSK 20' Low-Pro Flatdeck with Duals $9,245.00















Standard Features• 25,000 lb. G.V.W.R.• 10,000 lb. x 2 G.A.W.R.• GN 2 5/16" Ball Bulldog Coupler 25,000 lb• Safety Chains• 2 - Drop Leg Jacks (10,000 lb.)• 2 - Dexter Oil Bath Brake Axles (10,000 lb.)• 5 Leaf Slipper Spring Suspension• 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern• 8 - 16" 235/80R16 Radial Tires (3,090 lb)• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Monster Steps on Both Sides

• Lockable Front Toolbox w/ Chain Holder• 8' Ramps w/ Holders• 12" x 19 lb. I-Beam Main Frame, Riser & Neck• Frame Bridge Standard on 30' and up• 3" Channel Crossmembers 16" on Center• 2 x 6 x 1/8" Square Tubing Outer Deck Frame• 2" Treated Pine Lumber Deck• 102" Wide Deck• DOT Approved Flushmount Lifetime LED Lights• Amber Side Turn Flashers• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• 5 year Dexter Axle Warranty

Torsion Axle option will raise Deck Height 2".*** MAX GVWR 36,000 on Pintle Coupler with 15k or Triple 12k Axles. ***


Coupler Options:R* GN 2 5/16" Round (25,000 lb.) w/ Toolbox Incl. E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $353.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $220.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $220.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $220.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $0.00




$338.00


$355.00



Low-Pro Flatdeck with Duals (LD) Options





A2AS (2) 10,000# Axles (Dexter) Air / Springª $4,978.00 A2BS * (2) 10,000# Axles (Dexter) Electric / Spring Included

T2BS (2) 10,000# w/235/85R16 LR-G Dual T&W(Dexter)Electric / Spring $795.00












ª Air brakes may affect placement of ramp holders

Tail Options:S* Straight Deck w/ 2 Slide-in Ramps Incl. A 5' Dovetail w/ 5' Slide-in Ramps $535.00 E 5' Dovetail w/ 2 Flip-over Ramps w/HD Gusset $560.00 F 5' Dovetail w/ 2 Flip-over Ramps $453.00 J 5' Dovetail w/ 3 Flip-over Ramps w/HD Gusset $769.00 T 5' Dovetail w/ 3 Flip-over Ramps $604.00 W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,224.00 Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $2,911.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 4 Plate for Winch $145.00 7 Douglas Fir Lumber $8.13 / ft 9 Under Frame Tie Down Flat $3.13 / ft B 22 lb. I-Beam Main Frame & Neck $18.44 / ft C 12"oc Crossmembers $191.25 E Rough Oak Floor $21.25 / ft H Receiver Hitch $76.25 K 4" Ratchets every 4ft w/ Slide Track $27.81 / ft L Side Mount Wood Rack $322.50 M 6" Axle Spread (Longer Equalizer) $191.25 N 72" Axle Spread $267.50 P 11ga (1/8") DP Steel Floor w/4 D-Rings & 12"oc $46.25 / ft R Frame Bridging $206.25 S Diamond Plate Ramp Bottoms $145.00 T Torque Tube $12.19 / ft W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Z Ramp Support Arms $38.75 -BWFL Blackwood Classic Full Deck $31.88 / ft -BWOT Blackwood Classic Outer Deck $18.75 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -EL01 Add 7-Way RV Plug to Rear Bumper $105.00 -JA01 HD 25k Jost 2x Jacks $571.25 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -LT05 Add LED Reverse Lights $145.00 -RC01 1 - 38" Center Deck Roller $257.50 -RM30 No Ramps No Ramp Pockets -$156.25 -RP01 2 - 17" Outer Deck Rollers $397.50 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -S301 1 Side-mount Toolbox 45"x14" $382.50 -S501 1 Side-mount Toolbox 72"x14" $630.00 -SM02 2 Extra Side Marker Lights, 1 Per Side $67.50




(763) 434-2277 14" I-Beam Low-Pro with Duals (L3)

L 3 H 2 0 C 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

L3H20C2BSSK 20' x 14" I-Beam Low-Pro with Duals $12,273.00















Standard Features• 30,000 lb. G.V.W.R.• 12,000 lb. x 2 G.A.W.R.• GN 2 5/16" Ball Bulldog Coupler 30,000 lb• Safety Chains• 2 - Drop Leg Jacks (10,000 lb.)• 2 - Dexter Oil Bath Brake Axles (12,000 lb.)• 5 Leaf Slipper Spring Suspension• 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern• 8 - 16" 235/80R16 Radial Tires (3,090 lb)• 3" Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Monster Steps on Both Sides

• Lockable Front Toolbox w/ Chain Holder• 8' Ramps w/ Holders• 14" x 5" x 22 lb. I-Beam Main Frame, Riser & Neck• Frame Bridge Standard on 30' and up• 3" Channel Crossmembers 16" on Center• 2 x 8 x 1/8" Square Tubing Outer Deck Frame• 2" Treated Pine Lumber Deck• 102" Wide Deck• DOT Approved Flushmount Lifetime LED Lights• Amber Side Turn Flashers• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• 5 year Dexter Axle Warranty

Torsion Axle option will raise Deck Height 2".GVWR over 26,000 lbs subject to US Federal Excise Tax.

Gooseneck Length (8' 11").

Coupler Options:H* GN 2 5/16" Round (30,000 lb.) w/ Toolbox Incl. E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $133.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $0.00




$338.00


$355.00



14" I-Beam Low-Pro with Duals (L3) Options

Axle Options:A2BS (2) 10,000# Axles (Dexter) Electric / Spring ($1,595.00) C2AA (2) 12,000# Axles (Dexter) Air / Air Rideª² $7,128.00 C2AS (2) 12,000# Axles (Dexter) Air / Springª² $3,430.00 C2BA (2) 12,000# Axles (Dexter) Electric / Air Ride² $3,698.00 C2BS * (2) 12,000# Axles (Dexter) Electric / Spring Included






D2BS (2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter)Electric / Spring $520.00



Tail Options:S* Straight Deck w/ 2 Slide-in Ramps Incl. 4 5' Dovetail w/ 4 Flip-over Ramps $758.00 A 5' Dovetail w/ 5' Slide-in Ramps $535.00 E 5' Dovetail w/ 2 Flip-over Ramps w/HD Gusset $560.00 F 5' Dovetail w/ 2 Flip-over Ramps $453.00 J 5' Dovetail w/ 3 Flip-over Ramps w/HD Gusset $769.00 T 5' Dovetail w/ 3 Flip-over Ramps $604.00 W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,224.00 Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $2,911.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 4 Plate for Winch $145.00 7 Douglas Fir Lumber $8.13 / ft 9 Under Frame Tie Down Flat $3.13 / ft C 12"oc Crossmembers $191.25 E Rough Oak Floor $21.25 / ft H Receiver Hitch $76.25 K 4" Ratchets every 4ft w/ Slide Track $27.81 / ft L Side Mount Wood Rack $322.50 M 6" Axle Spread (Longer Equalizer) $191.25 P 11ga (1/8") DP Steel Floor w/4 D-Rings & 12"oc $46.25 / ft R Frame Bridging $206.25 S Diamond Plate Ramp Bottoms $145.00 T Torque Tube $12.19 / ft W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Z Ramp Support Arms $38.75 -BWFL Blackwood Classic Full Deck $31.88 / ft -BWOT Blackwood Classic Outer Deck $18.75 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -EL01 Add 7-Way RV Plug to Rear Bumper $105.00 -JA01 HD 25k Jost 2x Jacks $571.25 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -LT05 Add LED Reverse Lights $145.00 -RC01 1 - 38" Center Deck Roller $257.50 -RM30 No Ramps No Ramp Pockets -$156.25 -RP01 2 - 17" Outer Deck Rollers $397.50 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -S301 1 Side-mount Toolbox 45"x14" $382.50 -S501 1 Side-mount Toolbox 72"x14" $630.00 -SM02 2 Extra Side Marker Lights, 1 Per Side $67.50




(763) 434-2277 Flatdeck with Singles Hydr Dove (SY)

S Y R 3 2 7 3 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

SYR3273BSSK 32' Flatdeck with Singles Hydr Dove $11,905.00








Standard Features• 21,000 lb. G.V.W.R.• 7,000 lb. x 3 G.A.W.R.• GN 2 5/16" Ball Bulldog Coupler 25,000 lb• Safety Chains• 2 - Drop Leg Jacks (10,000 lb.)• 3 - Dexter E- Z lube Brake Axles (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 6 - 16" White Spoke Wheels• 6 - 235/80R16 Radial Tires (3,520 lb)• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• Self Contained Hydraulic Unit• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Monster Steps on Both Sides

• Lockable Front Toolbox w/ Chain Holder• 10' Hydraulic Dovetail• 12" x 14 lb. I-Beam Main Frame, Riser & Neck• 12" x 14 lb. I-Beam Main Frame, Riser & Neck• Frame Bridge Standard on 30' and up.• 2 x 6 x 1/8" Square Tubing Outer Deck Frame• 3" Channel Crossmembers 16" on Center• 2" Treated Pine Lumber Deck• 102" Wide Deck• DOT Approved Flushmount Lifetime LED Lights• Amber Side Turn Flashers• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• 5" x 7½ " West Craft Hyd. Cylinder• 5 year Dexter Axle Warranty

Minimum Length of 32'.Dovetail Hauling Capacity 4,000 lbs from center of Dovetail Forward.Dovetail Lift Capacity of 10,000 lbs from center of Dovetail Forward.

Max GVWR 24,000 with Triple 8k Axle Option.*** Triple Axle Requires 38' and up. ***






$338.00


$355.00



Flatdeck with Singles Hydr Dove (SY) Options








B2BS (2) 8,000# Oil Bath Axles, 235/80 Tires (Dexter)Electric / Spring² $371.00

B3BS (3) 8,000# Oil Bath Axles, 235/80 Tires (Dexter)Electric / Spring² $2,036.00

82BS (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter)Electric / Spring² $756.00




83BS (3) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter)Electric / Spring $2,614.00



Tail Options:S* 10' Hydraulic Dovetail Incl.

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 4 Plate for Winch $145.00 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $8.13 / ft 9 Under Frame Tie Down Flat $2.50 / ft B 22 lb. I-Beam Main Frame & Neck $17.81 / ft C 12"oc Crossmembers $191.25 E Rough Oak Floor $21.25 / ft H 19 lb. I-Beam Main Frame, Riser & Neck $12.19 / ft K 4" Ratchets every 4ft w/ Slide Track $27.50 / ft R Expanded Metal Traction Plates on Dovetail $332.50 T Torque Tube $12.19 / ft U Deck on the Neck (102" Wide 96" Long) $643.75 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Z 1x1 Angle Traction Bars on Rear of Deck $103.75 -BWFL Blackwood Classic Full Deck $31.88 / ft -BWFT Blackwood Classic Full Deck (Tail Only) $200.00 -BWHT Blackwood Classic Outer Deck (Tail Only) $132.50 -BWOT Blackwood Classsic Outer Deck $18.75 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -LT10 Light Bar w/4 Lights $332.50 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -S201 1 Side-mount Toolbox 45"x17½" $382.50 -S401 1 Side-mount Toolbox 72"x17½" $630.00 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $103.75




(763) 434-2277 Flatdeck with Hydraulic Dove (FY)

F Y R 3 0 A 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

FYR30A2BSSK 30' Flatdeck with Hydraulic Dove $13,434.00









Standard Features• 25,000 lb. G.V.W.R.• 10,000 lb. x 2 G.A.W.R.• GN 2 5/16" Ball Bulldog Coupler 25,000 lb• Safety Chains• 2 - Drop Leg Jacks (10,000 lb.)• 2 - Dexter Oil Bath Brake Axles (10,000 lb.)• 5 Leaf Slipper Spring Suspension• 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern• 8 - 16" 235/80R16 Radial Tires (3,090 lb)• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• Self Contained Hydraulic Unit• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Monster Steps on Both Sides

• Lockable Front Toolbox w/ Chain Holder• 10' Hydraulic Dovetail• 12" x 19 lb. I-Beam Main Frame, Riser & Neck• 12" x 19 lb. I-Beam Main Frame, Riser & Neck• Frame Bridge Standard on 30' and up.• 2 x 6 x 1/8" Square Tubing Outer Deck Frame• 3" Channel Crossmembers 16" on Center• 2" Treated Pine Lumber Deck• 102" Wide Deck• DOT Approved Flushmount Lifetime LED Lights• Amber Side Turn Flashers• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• 5" x 7½ " West Craft Hyd. Cylinder• 5 year Dexter Axle Warranty

Air Suspension Option Trailer need to 36' or longer.Dovetail Hauling Capacity 4,000 lbs from center of Dovetail Forward.Dovetail Lift Capacity of 10,000 lbs from center of Dovetail Forward.

*** MAX GVWR 36,000 on Pintle Coupler with 15k or Triple 12k Axles. ****** Triple Axle Requires 38' and up. ***






$338.00


$355.00



Flatdeck with Hydraulic Dove (FY) Options





A2BA (2) 10,000# Axles (Dexter) Electric / Air Ride² $3,808.00

A2BL (2) 10,000# Axles (Dexter)Electric / Air Ride w/ (1) Lift Axle² $4,730.00








C2BA (2) 12,000# Axles (Dexter) Electric / Air Ride² $5,293.00

C2BL (2) 12,000# Axles (Dexter)Electric / Air Ride w/ (1) Lift Axle² $6,185.00



C2HL (2) 12,000# Axles (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Air Ride w/ (1) LiftAxle²

$8,010.00









Tail Options:S* 10' Hydraulic Dovetail Incl. C 10' Hydraulic Self Cleaning Dovetail $553.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 1 Hutch susp. H9700-Underslung Tandem Axle $1,108.75 3 Hutch susp. H9700-Underslung Triple Axle $1,583.75 4 Plate for Winch $145.00 5 Solar Battery Charger $130.00 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $8.13 / ft 9 Under Frame Tie Down Flat $3.13 / ft B 22 lb. I-Beam Main Frame & Neck $18.44 / ft C 12"oc Crossmembers $191.25 E Rough Oak Floor $21.25 / ft K 4" Ratchets every 4ft w/ Slide Track $27.81 / ft L Side Mount Wood Rack $322.50 M 6" Axle Spread (Longer Equalizer) $191.25 N 72" Axle Spread $267.50 P 11ga (1/8") DP Steel Floor w/4 D-Rings & 12"oc $46.25 / ft R Expanded Metal Traction Plates on Dovetail $332.50 T Torque Tube $12.19 / ft U Deck on the Neck (102" Wide 96" Long) $643.75 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Z 1x1 Angle Traction Bars on Rear of Deck $103.75 -BWFL Blackwood Classic Full Deck $31.88 / ft -BWFT Blackwood Classsic Full Deck (Tail Only) $200.00 -BWHT Blackwood Classic Outer Deck (Tail Only) $132.50 -BWOT Blackwood Classic Outer Deck $18.75 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -JA01 HD 25k Jost 2x Jacks $571.25 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -LT10 Light Bar w/4 Lights $332.50 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -S201 1 Side-mount Toolbox 45"x17½" $382.50 -S401 1 Side-mount Toolbox 72"x17½" $630.00 -SM02 2 Extra Side Marker Lights, 1 Per Side $67.50 -TB03 Top Riser Toolbox $385.00 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $103.75




(763) 434-2277 Low-Pro with Hydraulic Dove (LY)

L Y R 3 0 A 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

LYR30A2BSSK 30' Low-Pro with Hydraulic Dove $14,084.00









Standard Features• 25,000 lb. G.V.W.R.• 10,000 lb. x 2 G.A.W.R.• GN 2 5/16" Ball Bulldog Coupler 25,000 lb• Safety Chains• 2 - Drop Leg Jacks (10,000 lb.)• 2 - Dexter Oil Bath Brake Axles (10,000 lb.)• 5 Leaf Slipper Spring Suspension• 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern• 8 - 16" 235/80R16 Radial Tires (3,090 lb)• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• Self Contained Hydraulic Unit• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape

• Monster Steps on Both Sides• Lockable Front Toolbox w/ Chain Holder• 10' Hydraulic Dovetail• 12" x 19 lb. I-Beam Main Frame, Riser & Neck• Frame Bridge Standard on 30' and up.• 2 x 6 x 1/8" Square Tubing Outer Deck Frame• 3" Channel Crossmembers 16" on Center• 2" Treated Pine Lumber Deck• 102" Wide Deck• DOT Approved Flushmount Lifetime LED Lights• Amber Side Turn Flashers• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• 5" x 7½ " West Craft Hyd. Cylinder• 5 year Dexter Axle Warranty

Air Suspension Option Trailer need to 36' or longer.Dovetail Hauling Capacity 4,000 lbs from center of Dovetail Forward.Dovetail Lift Capacity of 10,000 lbs from center of Dovetail Forward.

*** MAX GVWR 36,000 on Pintle Coupler with 15k or Triple 12k Axles. ****** Triple Axle Requires 38' and up. ***

Gooseneck Length (9').





$338.00


$355.00



Low-Pro with Hydraulic Dove (LY) Options





A2BA (2) 10,000# Axles (Dexter) Electric / Air Ride² $3,808.00 A2BS * (2) 10,000# Axles (Dexter) Electric / Spring Included A2BT (2) 10,000# Axles (Dexter) Electric / Torsion² $1,293.00

A2HA (2) 10,000# Axles (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Air Ride $5,963.00


A3BS (3) 10,000# Axles (Dexter) Electric / Spring $1,956.00 A3BT (3) 10,000# Axles (Dexter) Electric / Torsion² $3,895.00



T2HS (2) 10,000# w/235/85R16 LR-G Dual T&W(Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring $2,950.00

C2BA (2) 12,000# Axles (Dexter) Electric / Air Ride² $5,293.00 C2BS (2) 12,000# Axles (Dexter) Electric / Spring $1,595.00







D2HA (2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Air Ride $7,863.00




Tail Options:S* 10' Hydraulic Dovetail Incl. C 10' Hydraulic Self Cleaning Dovetail $553.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 1 Hutch susp. H9700-Underslung Tandem Axle $1,108.75 3 Hutch susp. H9700-Underslung Triple Axle $1,583.75 4 Plate for Winch $145.00 5 Solar Battery Charger $130.00 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $8.13 / ft 8 ¼" DP Steel Floor w/ 4 D-Rings & 12"oc $99.38 / ft 9 Under Frame Tie Down Flat $3.13 / ft B 22 lb. I-Beam Main Frame & Neck $18.44 / ft C 12"oc Crossmembers $191.25 E Rough Oak Floor $21.25 / ft K 4" Ratchets every 4ft w/ Slide Track $27.81 / ft L Side Mount Wood Rack $322.50 M 6" Axle Spread (Longer Equalizer) $191.25 N 72" Axle Spread $267.50 P 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 12"oc $46.25 / ft R Expanded Metal Traction Plates on Dovetail $332.50 T Torque Tube $12.19 / ft U Deck on the Neck (102" Wide 96" Long) $643.75 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Z 1x1 Angle Traction Bars on Rear of Deck $103.75 -BWFL Blackwood Classic Full Deck $31.88 / ft -BWFT Blackwood Classic Full Deck (Tail Only) $200.00 -BWHT Blackwood Classic Outer Deck (Tail Only) $132.50 -BWOT Blackwood Classic Outer Deck $18.75 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -JA01 HD 25k Jost 2x Jacks $571.25 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -LT10 Light Bar w/4 Lights $332.50 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -S301 1 Side-mount Toolbox 45"x14" $382.50 -S501 1 Side-mount Toolbox 72"x14" $630.00 -SM02 2 Extra Side Marker Lights, 1 Per Side $67.50 -TB03 Top Riser Toolbox $385.00 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $103.75




(763) 434-2277 Pipe Hauler (PT)

P T R 2 0 7 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

PTR2072BSSK 20' Pipe Hauler $5,344.00














Standard Features• 15,680 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• GN 2 5/16" Ball Bulldog Coupler 25,000 lb• Safety Chains• 1- Drop Leg Jacks (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Electric Breakaway Kit w/ Charger

• DOT Reflective Tape• Lockable Front Toolbox w/ Chain Holder• 12" x 14 lb. I-Beam Main Frame, Riser & Neck• DOT Approved Flushmount Lifetime LED Lights• Amber Side Turn Flashers• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• In Frame Tool Tray 48" X 54"• Headache Rack w/ Bumper Pull Option• 5 year Dexter Axle Warranty

*** MAX GVWR 24,000 with Triple 8k Axle Option and 24k+ Rated Coupler . ***Bumper Pull Tongue Length (7'), Gooseneck Length (8' 11").





$338.00


$355.00


Page 18 of 131 Printed 02/27/2017

Pipe Hauler (PT) Options




92BS (2) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric / Spring $443.00




Tail Options:S* Straight Deck Incl.

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 2 2nd 10K Jack $198.75 6 6" Taller GN Riser $153.75 N Torque Tube $12.19 / ft Q Front Toolbox (Bumper Pull) $191.25 T In Frame Tool Tray $183.75 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -LT10 Light Bar w/4 Lights $332.50 -RT01 1 Pair Weld-On Strap Ratchets $61.25


Page 19 of 131 Printed 02/27/2017


(763) 434-2277 Light Duty Deckover 5" Channel (L5)

L 5 J 1 6 3 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

L5J1032BSSK 10' Light Duty Deckover 5" Channel $3,934.00







Standard Features• 7,000 lb. G.V.W.R.• 3,500 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (7,000 lb.)• 2 - Dexter E- Z lube Brake Axles (3,500 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 15" White Spoke Wheels• 4 - 205/75R15 Radial Tires (1,800 lb)• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape

• Tool Tray In Tongue• 6' Slide in Ramps w/ Holders• 5" Channel Tongue• 5" Channel Frame Main Frame• 3x2" Angle Crossmembers 16" on Center• 2" Treated Pine Lumber Deck• 101" Wide Deck• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• 5 year Dexter Axle Warranty

*** MAX GVWR 7,000 ***Bumper Pull Tongue Length (5' 7").

Coupler Options:J* BP 2 5/16" Adjustable (14,000 lb.) Incl. 2 BP 2" A-Frame $0.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00




$338.00


$355.00


Page 20 of 131 Printed 02/27/2017

Light Duty Deckover 5" Channel (L5) Options

Axle Options:31BS (1) 3,500# (Dexter) Electric / Spring ($189.00) 32BS * (2) 3,500# (Dexter) Electric / Spring Included

32SS (2) 3,500# (Dexter)Surge Hydraulic Drum [Surge Coupler] / Spring² $670.00

51BS (1) 5,200# (Dexter) Electric / Spring ($49.00)

Tail Options:S* Straight Deck w/24x 6 ft Slide-in Ramps Exp Metal Incl. A 3' Dovetail w/24x 6 ft Slide-in Ramps Exp Metal $229.00 B 3' Dovetail w/ 2, 16"x60" Foldup Ramps $229.00 D 3' Dovetail w/ 2, 31"x66" HD Foldup Ramps $583.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 5 Upgrade to 225/75/R15 Tires $136.25 7 Douglas Fir Lumber $8.13 / ft M Mount Only for Spare Tire $33.75 Q Front Toolbox (Bumper Pull) $191.25 T Spare Tire and Mount (Bumper Pull) $142.50 V V Shape Front Deck $213.75 -BWFL Blackwood Classic Full Deck $31.88 / ft -BWOT Blackwood Classic Outer Deck $18.75 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -EL01 Add 7-Way RV Plug to Rear Bumper $105.00 -RT01 1 Pair Weld-On Strap Ratchets $61.25


Page 21 of 131 Printed 02/27/2017


(763) 434-2277 Med. Duty Deckover 6" Channel (L6)

L 6 J 1 6 5 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

L6J1452BSSK 14' Med. Duty Deckover 6" Channel $4,297.00






Standard Features• 9,990 lb. G.V.W.R.• 5,200 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (7,000 lb.)• 2 - Dexter E- Z lube Brake Axles (5,200 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 15" White Spoke Wheels• 4 - 225/75R15 Radial Tires• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape

• Tool Tray In Tongue• 6' Slide in Ramps w/ Holders• 6" Channel Tongue• 6" Channel Frame Main Frame• 3x2" Angle Crossmembers 16" on Center• 2" Treated Pine Lumber Deck• 101" Wide Deck• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• 5 year Dexter Axle Warranty


Coupler Options:J* BP 2 5/16" Adjustable (14,000 lb.) Incl. P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00




$338.00


$355.00


Page 22 of 131 Printed 02/27/2017

Med. Duty Deckover 6" Channel (L6) Options


52KS (2) 5,200# (Dexter) Surge Disc [Surge Coupler] /Spring² $1,725.00


71BS (1) 7,000# (Dexter) Electric / Spring ($886.00)

Tail Options:S* Straight Deck w/24x 6 ft Slide-in Ramps Exp Metal Incl. A 3' Dovetail w/24x 6 ft Slide-in Ramps Exp Metal $229.00 B 3' Dovetail w/ 2, 16"x60" Foldup Ramps $229.00 C 3' Dovetail w/ 3, 16"x60" Foldup Ramps $383.00 D 3' Dovetail w/ 2, 31"x66"HD Foldup Ramps $583.00 J 3" Dovetail w/ 4' Heavy Duty Fold-up Gate $396.00 V 3' Dovetaill w/ Split Heavy Duty Gate $650.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 2 Upgrade to 2 X 10k Jacks $397.50 3 10k Jack (Bumper Pull) $132.50 4 ¼" DP Steel Floor w/4 Flushmount D-Rings & 12"oc $76.56 / ft 6 Upgrade to 235/80 R16 on 52k Axles w /1" Spacer $138.75 7 Douglas Fir Lumber $8.13 / ft C 12"oc Crossmembers $191.25 E Rough Oak Floor $21.25 / ft K 4" Ratchets every 4ft w/ Slide Track $27.81 / ft M Mount Only for Spare Tire $33.75 N 2 3/8" Pipetop (Removable) $22.81 / ft P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

12"oc$46.25 / ft

Q Front Toolbox (Bumper Pull) $191.25 T Spare Tire and Mount (Bumper Pull) $206.25 V V Shape Front Deck $213.75 -BWFL Blackwood Classic Full Deck $31.88 / ft -BWOT Blackwood Classic Outer Deck $18.75 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -EL01 Add 7-Way RV Plug to Rear Bumper $105.00 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -S101 1 Side-mount Toolbox 30"x14" $382.50


Page 23 of 131 Printed 02/27/2017


(763) 434-2277 8" I-Beam Deckover (F8)

F 8 J 1 6 7 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

F8J1672BSSK 16' x 8" I-Beam Deckover $4,714.00









Standard Features• 14.,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Tool Tray In Tongue• 6' 6" Slide in Ramps w/ Holders

• 8" x 10 lb. I-Beam Tongue• 8" x 10 lb. I-Beam Main Frame• 3" Channel Crossmembers 16" on Center• 2" Treated Pine Lumber Deck• 96" Wide Deck• 2 x 6 x 1/8" Square Tubing Outer Deck Frame• DOT Approved Flushmount Lifetime LED Lights• Amber Side Turn Flashers• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• GN Option Equipped with 2 Jacks• GN Equipped with Lockable Front Toolbox• GN Equipped with Chain Holder• 5 year Dexter Axle Warranty

All 5ft. Dovetails or 8k axle options must include 102" wide option (R).*** 28' and 30' need to have Triple Axle Option Added. ***

*** MAX GVWR 24,000 with Triple 8k Axles and 24k+ Rated Coupler. ***Bumper Pull Tongue Length (6' 3").

Coupler Options:J* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $88.00 C Rigid Mount Pintle Eye- Face-mount $88.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,245.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $1,245.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,245.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,025.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,025.00 T HD 2 5/16" Adjustable Channel Mount 3 Bolt Coupler $54.00




$338.00


$355.00


Page 24 of 131 Printed 02/27/2017

8" I-Beam Deckover (F8) Options

Axle Options:52BS (2) 5,200# (Dexter) Electric / Spring $0.00 53BS (3) 5,200# (Dexter) Electric / Spring $988.00 72BS * (2) 7,000# (Dexter) Electric / Spring Included 72BT (2) 7,000# (Dexter) Electric / Torsion $285.00

72GS (2) 7,000# (Dexter)Elec/Hyd Drum (1,000 PSI Pump) / Spring² $1,393.00
















$2,488.00

K2HT (2) 8,000# Oil Bath w/215/75R17.5 LR-HSingles(Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Torsion²

$4,720.00




82SS (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter)Surge Hydraulic Drum [Surge Coupler] / Spring² $3,423.00



Tail Options:S* Straight Deck w/ 6'6" Slide-in Ramps Incl. A 3' Dovetail w/ 5' Slide-in Ramps (18' and up) $229.00 B 3' Dovetail w/ 2, 16"x60" Foldup Ramps $229.00 C 3' Dovetail w/ 3, 16"x60" Foldup Ramps $383.00 D 3' Dovetail w/ 2, 31"x66"HD Foldup Ramps $583.00 F 5' Dove with 2 Flipover Ramps (Must Have R opt) $535.00 G 3' Dovetail w/ 3 31"x66"HD Foldup Ramps $871.00 J 3' Dovetail w/ 2 16"x60" Dbl Hinge Foldup Ramps $270.00 M 3' Dovetail w/ 3 16"x60" Dbl Hinge Foldup Ramps $424.00 P 4' Dove with 2 Flipover Ramps $438.00 R 4' Dove with 3 Flipover Ramps $591.00 T 5' Dove with 3 Flipover Ramps (Must Have R opt) $689.00 U 5' Dove 3 31"x66" Fld Up Rmp.(Must Have R opt) $1,178.00 Y 4' Dove with 4ft. Monster Ramps (20' and up) $1,159.00 Z 5' Dove 2 31"x66" Fld Up Rmp.(Must Have R opt) $1,045.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 2 Monster Steps on Both Sides $68.75 4 Plate for Winch $145.00 7 Douglas Fir Decking $8.13 / ft 8 Full Size Toolbox (Bumper Pull) $266.25 C 12"oc Crossmembers $191.25 E Rough Oak Floor $21.25 / ft G 2nd Jack $198.75 H Receiver Hitch $76.25 K 4" Ratchets every 4ft w/ Slide Track $27.81 / ft M Mount Only for Spare Tire $33.75 P 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 12"oc $46.25 / ft Q Front Toolbox (Bumper Pull) $191.25 R 102" Deck Width $200.00 T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $643.75 W Warn M12000 Winch w/Plate & Battery $2,670.00 Z Ramp Support Arms w/. Dove $38.75 -BWFL Blackwood Calssic Full Deck $31.88 / ft -BWOT Blackwood Classic Outer Deck $18.75 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -EL01 Add 7-Way RV Plug to Rear Bumper $105.00 -FR01 Under Frame Fork Rack (96" Wide Only) $265.00 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -LT10 Light Bar w/4 Lights $332.50 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -S101 1 Side-mount Toolbox 30"x14" $382.50 -SP01 Under Frame Spare Tire and Mount $325.00


Page 25 of 131 Printed 02/27/2017


(763) 434-2277 Classic Pintle with Duals (PD)

P D P 2 0 A 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

PDP20A2BSSK 20' Classic Pintle with Duals $8,328.00













Standard Features• 25,000 lb. G.V.W.R.• 10,000 lb. x 2 G.A.W.R.• 3" Pintle Eye Face Mount Coupler• Safety Chains• 2 - Drop Leg Jacks (10,000 lb.)• 2 - Dexter Oil Bath Brake Axles (10,000 lb.)• 5 Leaf Slipper Spring Suspension• 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern• 8 - 16" 235/80R16 Radial Tires (3,090 lb)• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Monster Steps on Both Sides

• Lockable Front Toolbox• 8' Ramps w/ Holders• 12" x 19 lb. I-Beam Main Frame• Frame Bridge Standard on 30' and up.• 3" Channel Crossmembers 16" on Center• 2 x 6 x 1/8" Square Tubing Outer Deck Frame• 2" Treated Pine Lumber Deck• 102" Wide Deck• DOT Approved Flushmount Lifetime LED Lights• Amber Side Turn Flashers• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• 5 year Dexter Axle Warranty

*** MAX GVWR 36,000 on Pintle Coupler with 15k or Triple 12k Axles. ***Bumper Pull Tongue Length (6' 11").

Coupler Options:P* 3" Pintle Eye - Face-mount (36,000 lb.) Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) w/Tbx $0.00




$338.00


$355.00


Page 26 of 131 Printed 02/27/2017

Classic Pintle with Duals (PD) Options

Axle Options:

S2BS (2) 10,000# w/235/75R17.5" LR-J Single T&W(Dexter)Electric / Spring²

$935.00

S2BT (2) 10,000# w/235/75R17.5" LR-J Single T&W(Dexter)Electric / Torsion²

$2,228.00

S2HS (2) 10,000# w/235/75R17.5" LR-J Single T&W(Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring²

$3,095.00

A2BA (2) 10,000# Axles (Dexter) Electric / Air Ride² $3,808.00 A2BS * (2) 10,000# Axles (Dexter) Electric / Spring Included A2BT (2) 10,000# Axles (Dexter) Electric / Torsion² $1,293.00







C2HS (2) 12,000# Axles (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring² $3,420.00


C3HS (3) 12,000# Axles (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring² $7,086.00




Tail Options:S* Straight Deck Incl. A 5' Dovetail w/ 5' Slide-in Ramps $535.00 E 5' Dovetail w/ 2 Flip-over Ramps w/HD Gusset $560.00 F 5' Dovetail w/ 2 Flip-over Ramps $453.00 J 5' Dovetail w/ 3 Flip-over Ramps w/HD Gusset $769.00 T 5' Dovetail w/ 3 Flip-over Ramps $604.00 W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,224.00 Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $2,911.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 1 Hutch susp. H9700-Underslung Tandem Axle $1,108.75 4 Plate for Winch $145.00 7 Douglas Fir Lumber $8.13 / ft 9 Single Side Under Frame Tie Down Flat $3.13 / ft B 22 lb. I-Beam Main Frame $6.25 / ft C 12"oc Crossmembers $191.25 E Rough Oak Floor $21.25 / ft H Receiver Hitch $76.25 K 4" Ratchets every 4ft w/ Slide Track $27.81 / ft L Side Mount Wood Rack $322.50 M 6" Axle Spread (Longer Equalizer) $191.25 N 72" Axle Spread $267.50 P 11ga (1/8") DP Stl Flr w/4D-Rings (Cut Fndrs)

&12"oc$46.25 / ft

R Frame Bridging $206.25 S Diamond Plate Ramp Bottoms $145.00 T Torque Tube $12.19 / ft W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Z Ramp Support Arms $38.75 -BWFL Blackwood Classic Full Deck $31.88 / ft -BWOT Blackwood Classic Outer Deck $18.75 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -EL01 Add 7-Way RV Plug to Rear Bumper $105.00 -JA01 HD 25k Jost 2x Jacks $571.25 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -RC01 1 - 38" Center Deck Roller $257.50 -RL01 Straight Deck Rolling Tail Board $995.00 -RM30 No Ramps No Ramp Pockets -$156.25 -RP01 2 - 17" Outer Deck Rollers $397.50 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -S201 1 Side-mount Toolbox 45"x17½" $382.50 -S401 1 Side-mount Toolbox 72"x17½" $630.00 -SM02 2 Extra Side Marker Lights, 1 Per Side $67.50


Page 27 of 131 Printed 02/27/2017


(763) 434-2277 Low-Pro Pintle with Duals (PL)

P L P 2 0 A 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

PLP20A2BSSK 20' Low-Pro Pintle with Duals $8,993.00













Standard Features• 25,000 lb. G.V.W.R.• 10,000 lb. x 2 G.A.W.R.• 3" Pintle Eye Face Mount Coupler• Safety Chains• 2 - Drop Leg Jacks (10,000 lb.)• 2 - Dexter Oil Bath Brake Axles (10,000 lb.)• 5 Leaf Slipper Spring Suspension• 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern• 8 - 16" 235/80R16 Radial Tires (3,090 lb)• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Side Steps on Both Sides

• Lockable Front Toolbox• 8' Ramps w/ Holders• 12" x 19 lb. I-Beam Main Frame• Frame Bridge Standard on 30' and up• 3" Channel Crossmembers 16" on Center• 2 x 6 x 1/8" Square Tubing Outer Deck Frame• 2" Treated Pine Lumber Deck• 102" Wide Deck• DOT Approved Flushmount Lifetime LED Lights• Amber Side Turn Flashers• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated

Torsion Axle option will raise Deck Height 2".*** MAX GVWR 36,000 on Pintle Coupler with 15k or Triple 12k Axles. ***

Bumper Pull Tongue Length (6' 11").

Coupler Options:P* 3" Pintle Eye - Face-mount (36,000 lb.) w/Tbx Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) w/Tbx $0.00




$338.00


$355.00


Page 28 of 131 Printed 02/27/2017

Low-Pro Pintle with Duals (PL) Options





A2BA (2) 10,000# Axles (Dexter) Electric / Air Ride² $3,808.00 A2BS * (2) 10,000# Axles (Dexter) Electric / Spring Included A2BT (2) 10,000# Axles (Dexter) Electric / Torsion $1,293.00



A3BS (3) 10,000# Axles (Dexter) Electric / Spring $1,956.00 A3BT (3) 10,000# Axles (Dexter) Electric / Torsion² $3,895.00













Tail Options:S* Straight Deck w/ 2 Slide-in Ramps Incl. 4 5' Dovetail w/ 4 Flip-over Ramps $758.00 A 5' Dovetail w/ 5' Slide-in Ramps $535.00 E 5' Dovetail w/ 2 Flip-over Ramps w/HD Gusset $560.00 F 5' Dovetail w/ 2 Flip-over Ramps $453.00 J 5' Dovetail w/ 3 Flip-over Ramps w/HD Gusset $769.00 T 5' Dovetail w/ 3 Flip-over Ramps $604.00 W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,224.00 Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $2,911.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 4 Plate for Winch $145.00 7 Douglas Fir Lumber $8.13 / ft 9 Under Frame Tie Down Flat $3.13 / ft B 22 lb. I-Beam Main Frame $6.25 / ft C 12"oc Crossmembers $191.25 E Rough Oak Floor $21.25 / ft H Receiver Hitch $76.25 K 4" Ratchets every 4ft w/ Slide Track $27.81 / ft L Side Mount Wood Rack $322.50 M 6" Axle Spread (Longer Equalizer) $191.25 N 72" Axle Spread $267.50 P 11ga (1/8") DP Steel Floor w/4 D-Rings & 12"oc $46.25 / ft R Frame Bridging $206.25 S Diamond Plate Ramp Bottoms $145.00 T Torque Tube $12.19 / ft W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Z Ramp Support Arms $38.75 -BWFL Blackwood Classic Full Deck $31.88 / ft -BWOT Blackwood Classic Outer Deck $18.75 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -EL01 Add 7-Way RV Plug to Rear Bumper $105.00 -JA01 HD 25k Jost 2x Jacks $571.25 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -LT05 Add LED Reverse Lights $145.00 -RC01 1 - 38" Center Deck Roller $257.50 -RM30 No Ramps No Ramp Pockets -$156.25 -RP01 2 - 17" Outer Deck Rollers $397.50 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -S301 1 Side-mount Toolbox 45"x14" $382.50 -S501 1 Side-mount Toolbox 72"x14" $630.00 -SM02 2 Extra Side Marker Lights, 1 Per Side $67.50


Page 29 of 131 Printed 02/27/2017


(763) 434-2277 83" Manual Tilt (TM)

T M J 1 6 3 2 C S T K1 2 3 4 5 6 7 8 9 10 11 Other

TMJ1632CSTK 16' x 83" Manual Tilt $3,281.00




Standard Features• 7,000 lb. G.V.W.R.• 3,500 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Top Wind Drop-Leg Jack (8,000 lb.)• 2 Dexter E-Z lube Axles, Idler & Brake (3,500 lb)• 4 Leaf Double-eye Spring Suspension• 4 - 15" White Spoke Wheels• 4 - ST205/75R15 Radial Tires (1,820 lb)• Electric Breakaway Kit w/ Charger• 9" x 72" Treadplate Aluminum Fenders

• Manually Operated Tilting Jack (3 Ton)• 5" Channel Frame & Tongue• 3" Channel Crossmembers 16" on Center• 2" Treated Pine Lumber Deck• 83" Wide Deck• DOT Approved Flushmount Lifetime LED Lights• Sealed Wire Harness• Sand Blasted, Acid Washed, Powder Coated• Stake Pockets• 5 year Dexter Axle Warranty

16' Trailer Must Have Drop Axles.*** MAX GVWR 10,400 with 5200 lb Axle Option. ****** Trailer will have 80" Frame with Drop Axles. ***


Coupler Options:J* BP 2 5/16" Adjustable Incl. D BP 2" Adjustable $0.00 P 3" Pintle Eye - Channel-mount $0.00


Powder Coat Color Options:Black (k) * Incl. Desert Tan (t) Grey (g) Red (r) Tractor Green (j) Tractor Orange (n) White (w)

$63.00

Page 30 of 131 Printed 02/27/2017

83" Manual Tilt (TM) Options

Axle Options:32CD (2) 3,500# (Dexter) One Electric / Drop Axle² $283.00 32CS * (2) 3,500# (Dexter) One Electric / Spring Included 32ED (2) 3,500# (Dexter) Electric / Drop Axle² $458.00 32ES (2) 3,500# (Dexter) Electric / Spring $175.00 52CS (2) 5,200# (Dexter) One Electric / Spring $304.00 52ES (2) 5,200# (Dexter) Electric / Spring $533.00

Tail Options:T* Tilt Deck Incl.

Other Options:4 Plate for Winch $145.00 8 2 Stake Pockets In Front of Trailer $12.50 F Steel Diamond Plate Fenders $0.00 Q Rubrail $5.00 / ft S 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

16"oc$29.38 / ft

T Mount Only for Spare Tire $33.75 V Spare Tire and Mount $130.00 -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00


Page 31 of 131 Printed 02/27/2017


(763) 434-2277 83" Hydraulic Quick Tilt (TH)

T H J 1 6 3 2 C S T K1 2 3 4 5 6 7 8 9 10 11 Other

THJ1632CSTK 16' x 83" Hydraulic Quick Tilt $4,120.00




Standard Features• 7,000 lb. G.V.W.R.• 3,500 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Top Wind Drop-Leg Jack (8,000 lb.)• 2 Dexter E-Z lube Axles, Idler & Brake (3,500 lb)• 4 Leaf Double-eye Spring Suspension• 4 - 15" White Spoke Wheels• 4 - ST205/75R15 Radial Tires (1,820 lb)• Electric Breakaway Kit w/ Charger• 9" x 72" Treadplate Aluminum Fenders

• 5" Channel Frame & Tongue• 3" Channel Crossmembers 16" on Center• 2" Treated Pine Lumber Deck• 83" Wide Deck• DOT Approved Flushmount Lifetime LED Lights• Sealed Wire Harness• Sand Blasted, Acid Washed, Powder Coated• Hydraulic Power Up & Down• Integrated 12V Trickle Charger• Stake Pockets• 5 year Dexter Axle Warranty

16' Trailer must have Drop Axles.*** MAX GVWR 10,400 with 5,200 lb Axle Option. ******Trailer will have 80" Frame with Drop Axles. ***


Coupler Options:J* BP 2 5/16" Adjustable Incl. D BP 2" Adjustable $0.00 P 3" Pintle Eye - Channel-mount $0.00



$63.00

Page 32 of 131 Printed 02/27/2017

83" Hydraulic Quick Tilt (TH) Options

Axle Options:32CD (2) 3,500# (Dexter) One Electric / Drop Axle² $283.00 32CS * (2) 3,500# (Dexter) One Electric / Spring Included 32ED (2) 3,500# (Dexter) Electric / Drop Axle² $458.00 32ES (2) 3,500# (Dexter) Electric / Spring $175.00 52CS (2) 5,200# (Dexter) One Electric / Spring $304.00 52ES (2) 5,200# (Dexter) Electric / Spring $533.00


Other Options:4 Plate for Winch $145.00 8 2 Stake Pockets In Front of Trailer $13.75 F Steel Diamond Plate Fenders $0.00 Q Rubrail $5.00 / ft S 11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings &

16"oc$29.38 / ft

T Mount Only for Spare Tire $33.75 V Spare Tire and Mount $130.00 -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00


Page 33 of 131 Printed 02/27/2017


(763) 434-2277 Single Axle HD Tilt (T1)

T 1 D 1 3 7 1 B D T K1 2 3 4 5 6 7 8 9 10 11 Other

T1D1371BDTK 13' Single Axle HD Tilt $3,780.00

T1D1671BDTK 16' Single Axle HD Tilt $4,038.00

Standard Features• 7,000 lb. G.V.W.R.• 7,000 lb. x 1 G.A.W.R.• 2" Ball Adjustable Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (8,000 lb.)• 1 - Dexter E- Z lube Brake Drop Axle (7,000 lb)• 2 - 16" White Spoke Wheels• 2 - 235/80R16 Radial Tires (3,520 lb)• Stake Pockets• Electric Breakaway Kit w/ Charger• Removable Tread-plate Steel Fenders• Expanded Metal Tool Tray In Tongue• 11 Degree Tilt Angle• Hydraulic Cushion Cylinder w/ Reservoir

• 5" Channel Tongue• 5” x 2” Steel Tube Frame• 3" Channel Crossmembers 16" on Center• 2" Treated Pine Lumber Deck• 81" x 13’ Tilting Deck• 81" Between Fenders• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• Knife Edge Tail• 4 Recessed D-rings & 1 Center D-ring• Bull Nose Bumper• Mitered Front Corners• 5 year Dexter Axle Warranty

Bumper Pull Tongue Length (5').

Coupler Options:D* BP 2" Adjustable Incl. J BP 2 5/16" Adjustable $0.00 P 3" Pintle Eye - Channel-mount (14,000 lb.) $0.00




$338.00


$355.00


Page 34 of 131 Printed 02/27/2017

Single Axle HD Tilt (T1) Options

Axle Options:51BD (1) 5,200# (Dexter) Electric / Drop Axle ($57.00) 71BD * (1) 7,000# (Dexter) Electric / Drop Axle Included

71SD (1) 7,000# (Dexter)Surge Hydraulic Drum [Surge Coupler] / DropAxle

$520.00

91BD (1) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric / Drop Axle $221.00

91SD (1) 7,000# w/235/85R16 LR-G Tires (Dexter)Surge Hydraulic Drum [Surge Coupler] / DropAxle

$741.00


Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 3 Upgrade to Single 10k Jack (Bumper Pull) $132.50 4 Plate for Winch $145.00 7 Douglas Fir Lumber $6.88 / ft B Solar Battery Charger $130.00 C 12"oc Crossmembers $191.25 E Rough Oak Floor $18.75 / ft H Power up Power down Tilt $690.00 K Power Up/Down & Gravity Down $876.25 M Mount Only for Spare Tire $33.75 P 11ga(1/8")DP Steel Floor w/ 4 Flushmount D-Rings &

16"oc$45.00 / ft

Q Front Toolbox (Bumper Pull & Pintle) $191.25 R Expanded Metal Traction Plate on Tailboard $332.50 T Spare Tire and Mount (Bumper Pull) $198.75 Y 1x1 Angle Traction Bars on Rear of Deck $88.75 Z Roller on Front of Deck for Winch Cable $153.75 -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -DR07 7 Pair D-Rings $280.00 -FE05 Weld on Fenders $67.50 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $323.75 -TB04 Full Size Divided Toolbox Upgrade (BP Only) $271.25 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $88.75 -WN08 Warn 8k Zeon Winch w/Plate & Battery $1,450.00 -WN95 SuperWinch TS9500 w/Plate & Battery $1,025.00 -WP03 Winch Plate w/ Welded Receiver Hitch $221.25

Page 35 of 131 Printed 02/27/2017


(763) 434-2277 5" Channel Tilt Carhauler (T5)

T 5 J 1 6 3 2 E S T K1 2 3 4 5 6 7 8 9 10 11 Other

T5J1632ESTK 16' x 5" Channel Tilt Carhauler $4,426.00




Standard Features• 7,000 lb. G.V.W.R.• 3,500 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Top Wind Drop-Leg Jack (8,000 lb.)• 2 Dexter E-Z lube Axles, Idler & Brake (3,500 lb)• 4 Leaf Double-eye Spring Suspension• 4 - 15" White Spoke Wheels• 4 - ST205/75R15 Radial Tires (1,820 lb)• Stake Pockets & Rubrail• Electric Breakaway Kit w/ Charger

• 9" x 72" Treadplate Aluminum Fenders• 11 Degree Tilt Pitch• 5" Channel Frame & Tongue• 3" Channel Crossmembers 24" on Center• 2" Treated Pine Lumber Deck• 83" Wide Deck• 75" Wide Tiltable Deck• Sealed Wire Harness• Sand Blasted, Acid Washed, Powder Coated• DOT Approved Flushmount Lifetime LED Lights• 5 year Dexter Axle Warranty

*** MAX GVWR 10,400 with 5200 lb Axle Option. ***16" on center standard with 5,200 lb Axles.


Coupler Options:J* BP 2 5/16" Adjustable Incl. 2 BP 2" A-Frame $0.00 A BP 2 5/16" A-Frame $0.00 D BP 2" Adjustable $0.00 M BP 2" Atwood Style A-Frame Coupler $0.00 N BP 2 5/16" Atwood Style A-Frame Coupler $0.00 P 3" Pintle Eye - Channel-mount $0.00


Powder Coat Color Options:Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00Equipment Yellow (y) Grey (g) Red (r) Tractor Green (j) White (w)

$63.00

Primer + Black (Texas) (0) $138.00Primer + Red (Texas) (1) $296.00Desert Tan (t) Primer + Desert Tan (Texas) (8) $338.00

Primer + Equipment Yellow (Texas) (4) Primer + Tractor Orange (Texas) (5) Tractor Orange (n)

$355.00

Page 36 of 131 Printed 02/27/2017

5" Channel Tilt Carhauler (T5) Options

Axle Options:32CS (2) 3,500# (Dexter) One Electric / Spring ($165.00) 32ES * (2) 3,500# (Dexter) Electric / Spring Included 52CS (2) 5,200# (Dexter) One Electric / Spring $261.00 52ES (2) 5,200# (Dexter) Electric / Spring $418.00

52SS (2) 5,200# (Dexter)Surge Hydraulic Drum [Surge Coupler] / Spring² $1,230.00


Other Options:3 10k Jack (Bumper Pull) $132.50 4 Plate for Winch $145.00 5 Upgrade to 235/80 R16 on 52k Axles $122.50 F Steel Diamond Plate Fenders $0.00 K Smooth Steel Fenders $0.00 M Open Pit Steel Floor w4 Flushmount D-Rings $322.50 S 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

16"oc$26.56 / ft

T Mount Only for Spare Tire $33.75 V Spare Tire and Mount $130.00 X 16"oc Crossmembers $196.25 Z Roller on Front of Deck for Winch Cable $153.75 -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -TB01 Front Toolbox $190.00


Page 37 of 131 Printed 02/27/2017


(763) 434-2277 6" Channel Equipment Tilt (T6)

T 6 J 1 6 7 2 B T T K1 2 3 4 5 6 7 8 9 10 11 Other

T6J1672BTTK 16' x 6" Channel Equipment Tilt $5,568.00





Standard Features• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• Torsion Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Stake Pockets & Rubrail• Electric Breakaway Kit w/ Charger• 9" x 72" Treadplate Removable Steel Fenders• Tool Tray In Tongue

• 11 Degree Tilt Pitch• 3" x 16" Cylinder• 6" Channel Frame & Tongue• 3" Channel Crossmembers 16" on Center• 2" Treated Pine Lumber Deck• 74" Wide Tiltable Deck• 82" Between Fenders• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• GN Option Equipped with 2 Jacks• GN Equipped w/Lockable Front Toolbox• 10 year Dexter Torflex Axle Warranty

*** 8" I-beam on Goosenecks. ***Triple Axle Available on 22' and up with 8" Channel upgrade.

*** MAX GVWR 15,680 with Tandem 7k Axle Option and Gooseneck Option . ****** Tilting Deck Length is 17' 2" ***


Coupler Options:J* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $88.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,378.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,245.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $1,245.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,245.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,025.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,025.00 T HD 2 5/16" Adj.3 Bolt Coupler w/6 hole Chn Bracket $54.00




$338.00


$355.00


Page 38 of 131 Printed 02/27/2017

6" Channel Equipment Tilt (T6) Options

Axle Options:72BT * (2) 7,000# (Dexter) Electric / Torsion Included

72GT (2) 7,000# (Dexter)Elec/Hyd Drum (1,000 PSI Pump) / Torsion² $1,393.00

72KT (2) 7,000# (Dexter)Surge Disc [Surge Coupler] / Torsion² $1,525.00

72ST (2) 7,000# (Dexter)Surge Hydraulic Drum [Surge Coupler] / Torsion² $1,040.00

73BT (3) 7,000# (Dexter) Electric / Torsion² $1,129.00


92BT (2) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric / Torsion $443.00


Tail Options:T* 16' Tilt Deck Incl.

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 1 18ft Power Up\Down Tilt Deck $661.25 2 20ft Power Up/Down Tilt Deck $830.00 3 22ft Power Up/Down Tilt Deck $998.75 4 Plate for Winch $145.00 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $6.88 / ft 9 9,990 G.V.W.R. $0.00 B Solar Battery Charger $130.00 C 12"oc Crossmembers $191.25 E Rough Oak Floor $18.75 / ft G 2nd Jack (Bumper Pull) $198.75 H Power up Power down Tilt $690.00 K Power Up/Down & Gravity Down $876.25 M Mount Only for Spare Tire $33.75 P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

12"oc$46.25 / ft

Q Front Toolbox (Bumper Pull & Pintle) $191.25 R Expanded Metal Traction Plate on Tailboard $332.50 S ¼" DP Steel Floor w/4 Flushmount D-Rings & 12"oc $86.25 / ft T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $643.75 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Y 1x1 Angle Traction Bars on Rear of Deck $88.75 Z Roller on Front of Deck for Winch Cable $153.75 -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -BWPF Blackwood Pro Full Deck $30.31 / ft -BWPO Blackwood Pro Outer Deck $19.69 / ft -CH05 GN Lockable Chain Holder $143.75 -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -FR01 Fork Rack (18' and Longer) $265.00 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,668.75 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -LT10 Light Bar w/4 Lights $332.50 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $323.75 -TB03 Top Riser Toolbox $465.00 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $88.75


Page 39 of 131 Printed 02/27/2017


(763) 434-2277 HD Equipment Tilt 6" Channel (TJ)

T J T 1 6 8 2 B T T K1 2 3 4 5 6 7 8 9 10 11 Other

TJT1682BTTK 16' HD Equipment Tilt 6" Channel $7,884.00





Standard Features• 16,000 lb. G.V.W.R.• 8,000 lb. x 2 G.A.W.R.• HD 2 5/16" Adjustable 3 Bolt Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter Oil Bath Brake Axles (8,000 lb.)• Dexter Torflex® Torsion Suspension• 4 - 16" White Spoke Wheels• 4 - 235/85R16 14 Ply Radial Trs (4,080 lb)• Stake Pockets & Rubrail• Electric Breakaway Kit w/ Charger• 10" x 72" Treadplate Removable Steel Fenders• Tool Tray In Tongue


*** 8" I-beam on Goosenecks. ****** Goosenecks must be 18' or longer. ***

Coupler Options:T* HD 2 5/16" Adj.3 Bolt Coupler w/6 hole Chn Bracket Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $34.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,324.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,191.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $1,191.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,191.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $971.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $971.00 W 3" Pintle Eye Chan Mnt (20k lb.) w/8 Hole Ch Brckt $0.00




$338.00


$355.00


Page 40 of 131 Printed 02/27/2017

HD Equipment Tilt 6" Channel (TJ) Options

Axle Options:72BT (2) 7,000# (Dexter) Electric / Torsion ($1,576.00)

92BT (2) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric / Torsion ($1,061.00)

B2BT (2) 8,000# Oil Bath Axles, 235/80 Tires (Dexter)Electric / Torsion ($385.00)

K2BT (2) 8,000# Oil Bath w/215/75R17.5 LR-HSingles(Dexter)Electric / Torsion

$745.00

82BT * (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter)Electric / Torsion Included


Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 4 Plate for Winch $145.00 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $6.88 / ft 9 9,990 G.V.W.R. $0.00 B Solar Battery Charger $130.00 C 12"oc Crossmembers $191.25 E Rough Oak Floor $18.75 / ft G 2nd Jack (Bumper Pull) $198.75 H Power up Power down Tilt $690.00 K Power Up/Down & Gravity Down $876.25 M Mount Only for Spare Tire $33.75 P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

12"oc$46.25 / ft

Q Front Toolbox (Bumper Pull & Pintle) $191.25 R Expanded Metal Traction Plate on Tailboard $332.50 S ¼" DP Steel Floor w/4 Flushmount D-Rings & 12"oc $86.25 / ft T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $643.75 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Y 1x1 Angle Traction Bars on Rear of Deck $88.75 Z Roller on Front of Deck for Winch Cable $153.75 -BTRY 1 Extra Battery $225.00 -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -BWPF Blackwood Pro Full Deck $30.31 / ft -BWPO Blackwood Pro Outer Deck $19.69 / ft -CH05 GN Lockable Chain Holder $143.75 -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DON1 Removable Deck on the Neck (102" Wide 96" Long) $966.25 -DR01 1 Pair D-Rings $40.00 -FR01 Fork Rack $265.00 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $51.25 -JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks $301.25 -LT10 GN Light Bar w/4 Lights (GN Only) $332.50 -TB03 Top Riser Toolbox $465.00 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $88.75

Page 41 of 131 Printed 02/27/2017


(763) 434-2277 Powered Full Tilt (TF)

T F J 1 8 7 2 B T T K1 2 3 4 5 6 7 8 9 10 11 Other

TFJ1872BTTK 18' Powered Full Tilt $6,331.00




Standard Features• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• Torsion Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Stake Pockets & Rubrail• Electric Breakaway Kit w/ Charger• 9" x 72" Treadplate Removable Steel Fenders• Lockable Toolbox In Tongue• 6" Channel Frame & Tongue• 3" Channel Crossmembers 16" on Center

• 2" Treated Pine Lumber Deck• 74" Wide Tiltable Deck• 82" Between Fenders• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• Hydraulic Power Up & Down• Twin 3" X 16" Cylinders• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• GN Option Equipped with 2 Jacks• GN Equipped w/Lockable Front Toolbox• 3"x 16" w/o 8"ch. & 3" x 25" w/8"ch or 24' lengths• 10 year Dexter Torflex Axle Warranty

*** 24' has 8" Channel frame & 12" I-beam Neck. ***See T6 For Gravity Tilt.

*** MAX GVWR 15,680 with Tandem 7k Axle Option and Gooseneck Option . ***Bumper Pull Tongue Length (5' 3"), Gooseneck Length (8' 6").





$338.00


$355.00


Page 42 of 131 Printed 02/27/2017

Powered Full Tilt (TF) Options

Axle Options:52BT (2) 5,200# (Dexter) Electric / Torsion² ($66.00) 72BT * (2) 7,000# (Dexter) Electric / Torsion Included


72KT (2) 7,000# (Dexter)Surge Disc [Surge Coupler] / Torsion² $1,525.00

72ST (2) 7,000# (Dexter)Surge Hydraulic Drum [Surge Coupler] / Torsion² $1,040.00

73BT (3) 7,000# (Dexter) Electric / Torsion $1,129.00



Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 4 Plate for Winch $145.00 5 Solar Battery Charger $130.00 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $6.88 / ft 8 8" Channel Upgrade $25.94 / ft 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $191.25 E Rough Oak Floor $18.75 / ft G 2nd Jack (Bumper Pull) $200.00 M Mount Only for Spare Tire $33.75 N Diamond Plate Running Boards $9.38 / ft P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

12"oc$46.25 / ft

R 102" Deck Width From Fenders to Front of Deck $26.25 / ft S ¼" DP Steel Floor w/4 Flushmount D-Rings & 12"oc $86.25 / ft T Spare Tire and Mount (Bumper Pull) $200.00 U Deck on the Neck (102" Wide 96" Long) $643.75 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Y 1x1 Angle Traction Bars on Rear of Deck $88.75 Z Roller on Front of Deck for Winch Cable $136.25 -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -HY05 Power Up/Down & Gravity Down Upgrade $166.25 -LT10 Light Bar w/4 Lights $332.50 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $132.50 -TB03 Top Riser Toolbox $465.00 -TB04 Full Size Divided Toolbox Upgrade (BP Only) $82.50 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $88.75


Page 43 of 131 Printed 02/27/2017


(763) 434-2277 8" Channel Tilt (T7)

T 7 J 1 6 7 2 B T T K1 2 3 4 5 6 7 8 9 10 11 Other

T7J1672BTTK 16' x 8" Channel Tilt $5,926.00













Standard Features• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• Torsion Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Stake Pockets & Rubrail• Electric Breakaway Kit w/ Charger• 9" x 72" Treadplate Removable Steel Fenders• Tool Tray In Tongue


*** 24' and up has 12" I-beam Neck. ***Triple Axle available on 22' and longer.

*** MAX GVWR 21,000 with Triple 7k Axles and 21k+ Rated Coupler. ***Bumper Pull Tongue Length (5' 2"), Gooseneck Length (8' 7").





$338.00


$355.00


Page 44 of 131 Printed 02/27/2017

8" Channel Tilt (T7) Options

Axle Options:72BT * (2) 7,000# (Dexter) Electric / Torsion Included

72HT (2) 7,000# (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Torsion $1,518.00

73BT (3) 7,000# (Dexter) Electric / Torsion $1,129.00

73HT (3) 7,000# (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Torsion $3,405.00

Y2BT (2) 7,000# w/215/75R17.5 LR-H Singles (Dexter)Electric / Torsion² $1,168.00


Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 4 Plate for Winch $145.00 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $6.88 / ft 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $191.25 E Rough Oak Floor $18.75 / ft G 2nd Jack (Bumper Pull) $198.75 M Mount Only for Spare Tire $33.75 P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

12"oc$46.25 / ft

Q Front Toolbox (Bumper Pull & Pintle) $191.25 T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $643.75 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Y 1x1 Angle Traction Bars on Rear of Deck $88.75 Z Roller on Front of Deck for Winch Cable $153.75 -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $88.75


Page 45 of 131 Printed 02/27/2017


(763) 434-2277 HD Equipment Tilt 8" Channel (TK)

T K T 1 6 8 2 B T T K1 2 3 4 5 6 7 8 9 10 11 Other

TKT1682BTTK 16' HD Equipment Tilt 8" Channel $8,081.00













Standard Features• 16,000 lb. G.V.W.R.• 8,000 lb. x 2 G.A.W.R.• HD 2 5/16" Adjustable 3 Bolt Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter Oil Bath Brake Axles (8,000 lb.)• Dexter Torflex® Torsion Suspension• 4 - 16" White Spoke Wheels• 4 - 235/85R16 14 Ply Radial Trs (4,080 lb)• Stake Pockets & Rubrail• Electric Breakaway Kit w/ Charger• 10" x 72" Treadplate Removable Steel Fenders• Tool Tray In Tongue


Coupler Options:T* HD 2 5/16" Adj.3 Bolt Coupler w/6 hole Chn Bracket Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $34.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,324.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,191.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $1,191.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,191.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $971.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,100.00 V BP 2 5/16" Adj. (14,000 lb.) w/8 Hole Chan Bracket $0.00 W 3" Pintle Eye Chan Mnt (20k lb.) w/8 Hole Ch Brckt $0.00




$338.00


$355.00


Page 46 of 131 Printed 02/27/2017

HD Equipment Tilt 8" Channel (TK) Options

Axle Options:73BT (3) 7,000# (Dexter) Electric / Torsion ($1,091.00)

Y3BT (3) 7,000# w/215/75R17.5 LR-H Singles (Dexter)Electric / Torsion $660.00

93BT (3) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric / Torsion ($427.00)

B2BT (2) 8,000# Oil Bath Axles, 235/80 Tires (Dexter)Electric / Torsion ($385.00)

K2BT (2) 8,000# Oil Bath w/215/75R17.5 LR-HSingles(Dexter)Electric / Torsion

$745.00

82BT * (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter)Electric / Torsion Included


Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 1 18ft Power Up\Down Tilt Deck $661.25 2 20ft Power Up/Down Tilt Deck $830.00 4 Plate for Winch $145.00 5 Solar Battery Charger $130.00 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $6.88 / ft 8 Full Size Divided Toolbox Upgrade (BP Only) $82.50 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $191.25 E Rough Oak Floor $18.75 / ft G 2nd Jack (Bumper Pull) $198.75 3 22ft Power Up/Down Tilt Deck $998.75 H Power up Power down Tilt $711.25 K Power Up/Down & Gravity Down $876.25 M Mount Only for Spare Tire $33.75 P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

12"oc$46.25 / ft

Q Front Toolbox (Bumper Pull & Pintle) $191.25 R 102" Deck Width From Fenders to Front of Deck $26.25 / ft S ¼" DP Steel Floor w/4 Flushmount D-Rings & 12"oc $86.25 / ft T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $643.75 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Y 1x1 Angle Traction Bars on Rear of Deck $88.75 Z Roller on Front of Deck for Winch Cable $153.75 -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -BWPF Blackwood Pro Full Deck $30.31 / ft -BWPO Blackwood Pro Outer Deck $19.69 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -FR01 Fork Rack $265.00 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,668.75 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $323.75 -TB03 Top Riser Toolbox $465.00

Page 47 of 131 Printed 02/27/2017


(763) 434-2277 Deckover Tilt (T8)

T 8 J 2 2 7 2 B S T K1 2 3 4 5 6 7 8 9 10 11 Other

T8J2272BSTK 22' Deckover Tilt $6,861.00




Standard Features• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Tool Tray & Lockable Toolbox In Tongue• 8" x 10 lb. I-Beam Tongue• 8" x 10 lb. I-Beam Main Frame• 22' Tilt Portion w/ 15 Degree Tilt Pitch

• 3" Channel Crossmembers 16" on Center• 2 x 6 x 1/8" Square Tubing Outer Deck Frame• 2" Treated Pine Lumber Deck• 96" Wide Deck• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• 12VDC Hydraulic Pump• 2 - 3" x 16" West Craft Hyd. Cylinders• 12' Control Cable• Sand Blasted, Acid Washed, Powder Coated• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• GN Option Equipped with 2 Jacks• GN Equipped with Front Toolbox• GN Equipped with Chain Holder• 5 year Dexter Axle Warranty

28' or more must include Frame Bridge option.8k axle options must include 102" wide option (R).

*** MAX GVWR 16,500 with 8k Axle Option and 16.5k+ Rated Coupler. ***Bumper Pull Tongue Length (6' 3"), Gooseneck Length (8' 9").





$338.00


$355.00


Page 48 of 131 Printed 02/27/2017

Deckover Tilt (T8) Options

Axle Options:72BS * (2) 7,000# (Dexter) Electric / Spring Included 72BT (2) 7,000# (Dexter) Electric / Torsion² $285.00









$2,488.00

K2BT (2) 8,000# Oil Bath w/215/75R17.5 LR-HSingles(Dexter)Electric / Torsion²

$3,250.00

K2HS (2) 8,000# Oil Bath w/215/75R17.5 LR-HSingles(Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring²

$3,958.00

K2HT (2) 8,000# Oil Bath w/215/75R17.5 LR-HSingles(Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Torsion²

$4,720.00





Tail Options:T* 22' Tilt Incl.

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 1 ¼" DP Steel Floor w/ 4 D-Rings & 12"oc $76.56 / ft 2 Monster Steps on Both Sides $68.75 3 Solar Battery Charger $130.00 4 Plate for Winch $145.00 5 1x1 Angle Traction Bars on Rear of Deck $88.75 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $8.13 / ft 8 Full Size Divided Toolbox Upgrade (BP Only) $82.50 9 9,990 G.V.W.R. $0.00 B Frame Bridge $206.25 C 12"oc Crossmembers $191.25 E Rough Oak Floor $21.25 / ft G 2nd Jack (Bumper Pull) $198.75 H Under Frame Tie Down Flat $3.13 / ft K 4" Ratchets every 4ft w/ Slide Track $27.81 / ft M Mount Only for Spare Tire $33.75 N 2 Hydraulic Jacks Includes Front Toolbox $2,831.25 P 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 12"oc $50.63 / ft R 102" Deck Width $200.00 S Scissor Lift w/Cylinder $452.50 T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $643.75 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Y Spare Tire & Mount (Bumper Pull) G Rated $267.50 Z Roller on Front of Deck for Winch Cable $153.75 -BWFL Blackwood Classic Full Deck $31.88 / ft -BWOT Blackwood Classic Outer Deck $18.75 / ft -CP08 Upgrade to 8 Hole Channel Adjustable Coupler $33.75 -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -LT10 Light Bar w/4 Lights $332.50 -PUGD Power Up/Down & Gravity Down Upgrade $166.25 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -SP01 Under Frame Spare Tire and Mount $325.00 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $432.50 -TB03 Top Riser Toolbox $385.00 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $88.75


Page 49 of 131 Printed 02/27/2017


(763) 434-2277 HD Deckover Tilt (T9)

T 9 R 2 4 7 2 B S T K1 2 3 4 5 6 7 8 9 10 11 Other

T9R2472BSTK 24' HD Deckover Tilt $9,268.00







Standard Features• 15,680 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• GN 2 5/16" Ball Bulldog Coupler 25,000 lb• Safety Chains• 2 - Drop Leg Jack (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Monster Steps on Both Sides• 24' Tilt Portion w/ 17 Degree Tilt Pitch• 3" Channel Crossmembers 16" on Center• 2 x 6 x 1/8" Square Tubing Outer Deck Frame

• 2" Treated Pine Lumber Deck• 12" x 14 lb. I-Beam Main Frame, Riser & Neck• 102" Wide Deck• 5" x 10.5" West Craft Hyd. Cylinder w/Scissor Lift• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• 12VDC Hydraulic Pump• 12' Control Cable• Sand Blasted, Acid Washed, Powder Coated• 110V Integrated Trickle Charger• Interstate (TM) Deep Cycle Battery• GN Option Equipped with 2 Jacks• GN Equipped with Front Toolbox• GN Equipped with Chain Holder• 5 year Dexter Axle Warranty

Triple Axle Requires 30' and up.*** MAX GVWR 24,000 with Triple 8k Axles. ***


Coupler Options:R* GN 2 5/16" Round (25,000 lb.) w/ Toolbox Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $0.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $353.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $220.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $220.00 P 3" Pintle Eye - Face-mount (36,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $220.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $0.00




$338.00


$355.00


Page 50 of 131 Printed 02/27/2017

HD Deckover Tilt (T9) Options


72GS (2) 7,000# (Dexter)Elec/Hyd Drum (1,000 PSI Pump) / Spring $1,393.00



72KS (2) 7,000# (Dexter) Surge Disc [Surge Coupler] /Spring² $2,205.00








93BS (3) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric / Spring $2,048.00


B2BT (2) 8,000# Oil Bath Axles, 235/80 Tires (Dexter)Electric / Torsion² $2,120.00


$2,488.00






Tail Options:T* 24' Tilt Incl.

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 1 ¼" DP Steel Floor w/ 4 D-Rings & 12"oc $76.56 / ft 3 Solar Battery Charger $130.00 4 Plate for Winch $145.00 5 1x1 Angle Traction Bars on Rear of Deck $88.75 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $8.13 / ft 8 Full Size Divided Toolbox Upgrade (BP Only) $82.50 9 9,990 G.V.W.R. $0.00 B Frame Bridge $206.25 C 12"oc Crossmembers $191.25 E Rough Oak Floor $21.25 / ft H Under Frame Tie Down Flat $3.13 / ft K 4" Ratchets every 4ft w/ Slide Track $27.81 / ft N 2 Hydraulic Jacks Includes Front Toolbox $2,831.25 P 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 12"oc $45.94 / ft U Deck on the Neck (102" Wide 96" Long) $643.75 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Z Roller on Front of Deck for Winch Cable $153.75 -BWFL Blackwood Classic Full Deck $31.88 / ft -BWOT Blackwood Classic Outer Deck $18.75 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -LT10 Light Bar w/4 Lights $332.50 -MD01 Mud Flaps Single Wheel Deckover $52.50 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -S101 1 Side-mount Toolbox 30"x14" $382.50 -S501 1 Side-mount Toolbox 72"x14" $630.00 -SM02 2 Extra Side Marker Lights, 1 Per Side $67.50 -TB03 Top Riser Toolbox $385.00 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $88.75


Page 51 of 131 Printed 02/27/2017


(763) 434-2277 Tandem Dual Tilt (TD)

T D R 2 4 A 2 B T S K1 2 3 4 5 6 7 8 9 10 11 Other

TDR24A2BTSK 24' Tandem Dual Tilt $14,908.00









Standard Features• 25,000 lb. G.V.W.R.• 10,000 lb. x 2 G.A.W.R• GN 2 5/16" Ball Bulldog Coupler 25,000 lb• Safety Chains• 2 - Dropleg Jacks (10,000 lb.)• 2 - Dexter Oil Bath Axles (10,000 lb.)• Torsion Suspension• 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern• 8 - 16" 235/80R16 Radial Tires (3,090 lb)• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Monster Steps on Both Sides• Lockable Front Toolbox w/Chain Holder• Self-rising Bumper• 24' Tilt Portion w/ 15 Degree Tilt Pitch

• 12VDC Hydraulic Pump• Scissor Lift• 12" x 19 lb. I-Beam Main Frame, Riser & Neck• 8" x 15 lb. I-lb. Deck Frame• 3" Channel Crossmembers 16" on Center• 2 x 6 x 1/8" Square Tubing Outer Deck Frame• Frame Bridging on 30' and Longer• 2" Treated Pine Lumber Deck• 102" Wide Deck• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• 110V Integrated Trickle Charger• Interstate (TM) Deep Cycle Battery• 5" x 17" West Craft Hyd. Cylinder w/Scissor Lift• 10 year Dexter Torflex Axle Warranty

*** MAX GVWR 28,000 with 12k Axles and 28k+ Rated Coupler. ***

Coupler Options:R* GN 2 5/16" Round (25,000 lb.) w/ Toolbox Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) w/Tbx $0.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $353.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $220.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $220.00 P 3" Pintle Eye - Face-mount (36,000 lb.) w/Tbx $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $220.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $0.00




$338.00


$355.00


Page 52 of 131 Printed 02/27/2017

Tandem Dual Tilt (TD) Options





S2KT (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter)Surge Disc [Surge Coupler] / Torsion² $6,290.00

A2BA (2) 10,000# Axles (Dexter) Electric / Air Ride² $2,515.00 A2BS (2) 10,000# Axles (Dexter) Electric / Spring $0.00 A2BT * (2) 10,000# Axles (Dexter) Electric / Torsion Included

A2GT (2) 10,000# Axles (Dexter)Elec/Hyd Drum (1,000 PSI Pump) / Torsion² $3,448.00


A2HS (2) 10,000# Axles (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring² $863.00


T2BT (2) 10,000# w/235/85R16 LR-G Dual T&W(Dexter)Electric / Torsion² $795.00




D2BS (2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter)Electric / Spring² $2,115.00


Tail Options:S* 24' Tilt Deck Incl.

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 1 Hutch susp. H9700-Underslung Tandem Axle $1,108.75 4 Plate for Winch $145.00 5 1x1 Angle Traction Bars on Rear of Deck $88.75 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $8.13 / ft 9 Under Frame Tie Down Flat $3.13 / ft B 22 lb. I-Beam Main Frame, Riser & Neck $18.44 / ft C 12"oc Crossmembers $191.25 E Rough Oak Floor $21.25 / ft K 4" Ratchets every 4ft w/ Slide Track $27.81 / ft M 6" Axle Spread (Longer Equalizer) $191.25 P 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 12"oc $49.06 / ft R Frame Bridging $207.50 U Deck on the Neck (102" Wide 96" Long) $643.75 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Z Roller on Front of Deck for Winch Cable $153.75 -BWFL Blackwood Classic Full Deck $31.88 / ft -BWOT Blackwood Classic Outer Deck $18.75 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -JA01 HD 25k Jost 2x Jacks $571.25 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -LT10 Light Bar w/4 Lights $332.50 -RC01 1 - 38" Center Deck Roller $257.50 -RF01 2 - 17" Outer Deck Rollers - 1 - 38" Cntr Roller $655.00 -RP01 2 - 17" Outer Deck Rollers $397.50 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -S201 1 Side-mount Toolbox 45"x17½" $382.50 -S401 1 Side-mount Toolbox 72"x17½" $630.00 -SLCH Solar Battery Charger $130.00 -TB03 Top Riser Toolbox $385.00 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $103.75


Page 53 of 131 Printed 02/27/2017


(763) 434-2277 Single Axle HD Carhauler (C1)

C 1 D 1 0 7 1 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

C1D1071BSSK 10' Single Axle HD Carhauler $2,569.00




Standard Features• 7,000 lb. G.V.W.R.• 7,000 lb. x 1 G.A.W.R.• 2" Ball Adjustable Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (8,000 lb.)• 1 - Dexter E- Z lube Brake Axle (7,000 lb)• 6 Leaf Slipper Spring Suspension• 2 - 16" White Spoke Wheels• 2 - 235/80R16 Radial Tires (3,520 lb)• Stake Pockets• Electric Breakaway Kit w/ Charger

• Removable Tread-plate Steel Fenders• 5' Channel Ramps w/ Holder• 5" Channel Frame & Tongue• 3" Channel Crossmembers 16" on Center• 2" Treated Pine Lumber Deck• 83" Wide Deck (Except with Drop Axles)• DOT Approved Flushmount Lifetime LED Lights• Sealed Wire Harness• Sand Blasted, Acid Washed, Powder Coated• 5 year Dexter Axle Warranty

Coupler Options:D* BP 2" Adjustable Incl. J BP 2 5/16" Adjustable (14,000 lb.) $0.00 P 3" Pintle Eye - Channel-mount (14,000 lb.) $0.00




$338.00


$355.00


Page 54 of 131 Printed 02/27/2017

Single Axle HD Carhauler (C1) Options

Axle Options:71BD (1) 7,000# (Dexter) Electric / Drop Axle $90.00 71BS * (1) 7,000# (Dexter) Electric / Spring Included

Tail Options:S* Straight Deck w/ 5' Slide-in Ramps Incl. 2 2' Dovetail w/ 5' Slide-in Ramps $48.00 4 4' Dovetail w/ 5' Slide-in Ramps (16ft Only) $48.00

6 Straight Deck w/ 4' HD Fold-up Gate (No RampLegs) $256.00

7 2' Dovetail w/ 4' HD Fold-up Gate (No Ramp Legs) $304.00 A 2' Dovetail w/ 2 Fold-up Ramps $95.00 B Straight Deck w/ 4' Split Heavy Duty Gate $394.00 C Straight Deck w/ 2 Fold-up Ramps $48.00 D 4' Dovetail w/ 2 Fold-up Ramps $95.00 E 2' Dovetail w/ 3 Fold-up Ramps $189.00 F Straight Deck w/ Fold In Gate $268.00 G Straight Deck w/ 4' Fold-up Gate $200.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $314.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $361.00 K 2' Dovetail w/ Split Heavy Duty Gate $441.00 M 4' Dovetail w/ Split Heavy Duty Gate $441.00 N 2' Dovetail w/ 5' Rear Slide-in Ramps(16ft Only) $149.00 P 4' Dovetail w/ 5' Rear Slide-in Ramps(16ft Only) $216.00 R Straight Deck w/ Rear Slide-in Ramps(16ft Only) $101.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 3 Upgrade to Single 10k Jack (Bumper Pull) $132.50 4 Plate for Winch $145.00 C 12"oc Crossmembers $191.25 E Rough Oak Floor (Paris and Ohio Only) $15.63 / ft M Mount Only for Spare Tire $33.75 P 2" Pipetop Siderails (Removable) $22.81 / ft Q Rubrail $5.00 / ft S 11ga(1/8") DP Steel Floor w/ 4 Flushmount D-Rings &

16"oc$29.06 / ft

U Rear Trailer Support Jacks $106.25 V Spare Tire and Mount $198.75 -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -BWPF Blackwood Pro Full Deck $30.31 / ft -BWPO Blackwood Pro Outer Deck $19.69 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -WN95 SuperWinch TS9500 w/Plate & Battery $1,113.75

Page 55 of 131 Printed 02/27/2017


(763) 434-2277 4" Channel Carhauler (C4)

C 4 2 1 4 3 2 C S S K1 2 3 4 5 6 7 8 9 10 11 Other

C421432CSSK 14' x 4" Channel Carhauler $2,475.00



Standard Features• 7,000 G.V.W.R.• 7,000 G.A.W.R.• 2" Ball Bulldog Coupler• Safety Chains• 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.)• 2 Dexter E-Z lube Axles, Idler & Brake (3,500 lb)• 4 Leaf Double-Eye Spring Suspension• 4 - NEW 15" White Spoke Wheels• 4 - ST205/75R15 Radial Tires (1,820 lb)• Stake Pockets

• 9" x 33" Treadplate Removable Alum Fenders• 4" Channel Frame & Tongue• 2 1/2" x 2 1/2" x 3/16" Angle Crossmembers• 2" Treated Pine Lumber Deck• 83" Wide Deck• Flushmount 6” Oval Lifetime LED Tail Lights• Sealed Wire Harness• Sand Blasted, Acid Washed, Powder Coated• 5 year Dexter Axle Warranty


Coupler Options:2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $33.00 D BP 2" Adjustable $106.00 J BP 2 5/16" Adjustable $106.00 M BP 2" Atwood Style A-Frame Coupler $0.00 N BP 2 5/16" Atwood Style A-Frame Coupler $33.00 P 3" Pintle Eye - Channel-Mount $106.00



$63.00

Page 56 of 131 Printed 02/27/2017

4" Channel Carhauler (C4) Options

Axle Options:32CS * (2) 3,500# (Dexter) One Electric / Spring Included 32ES (2) 3,500# (Dexter) Electric / Spring $175.00

Tail Options:S* Straight Deck w/ 5' Slide-in Ramps Incl. 2 2' Dovetail w/ 5' Slide-in Ramps $48.00 A 2' Dovetail w/ 2 Fold-up Ramps $95.00 C Straight Deck w/ 2 Fold-up Ramps $48.00 G Straight Deck w/ 4' Fold-up Gate $200.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $314.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $361.00

Other Options:4 Plate for Winch $145.00 7 Upgrade to 7k Jack $88.75 F Steel Diamond Plate Fenders $0.00 J LED Light Upgrade Clearance/Marker $45.00 Q Rubrail $5.00 / ft T Mount Only for Spare Tire $33.75 U Rear Trailer Support Jacks $106.25 V Spare Tire and Mount $145.00 X 16"oc Crossmembers $190.00 -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00

Page 57 of 131 Printed 02/27/2017


(763) 434-2277 5" Channel Carhauler (C5)

C 5 2 1 4 3 2 C S S K1 2 3 4 5 6 7 8 9 10 11 Other








Standard Features• 7,000 lb. G.V.W.R.• 3,500 lb. x 2 G.A.W.R.• 2" Ball Bulldog Coupler• Safety Chains• 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.)• 2- Dexter E-Z lube Axles, Idler & Brake (3,500 lb)• 4 Leaf Double-eye Spring Suspension• 4 - NEW 15" White Spoke Wheels• 4 - ST205/75R15 Radial Tires (1,820 lb)• Stake Pockets• Electric Breakaway Kit w/ Charger• 9" x 33" Treadplate Removable Alum Fenders

• 5' Channel Ramps w/ Holder• 5" Channel Frame & Tongue• 3" Channel Crossmembers 24" on Center• 2" Treated Pine Lumber Deck• 83" Wide Deck (Except with Drop Axles)• DOT Approved Flushmount Lifetime LED Lights• Sealed Wire Harness• Sand Blasted, Acid Washed, Powder Coated• GN Option Equipped with 2 Jacks• GN Equipped w/Lockable Front Toolbox• 5 year Dexter Axle Warranty

Trailer will have 80" Frame with 3500 # Torsion Axle.Bumper Pull Tongue Length (3' 5").

Coupler Options:2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $33.00 D BP 2" Adjustable $106.00 J BP 2 5/16" Adjustable (14,000 lb.) $106.00 M BP 2" Atwood Style A-Frame Coupler $0.00 N BP 2 5/16" Atwood Style A-Frame Coupler $33.00 P 3" Pintle Eye - Channel-mount (14,000 lb.) $106.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,025.00


Powder Coat Color Options:Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00Desert Tan (t) Equipment Yellow (Texas & Ohio) (y) Grey (g) Red (r) Tractor Green (j) Tractor Orange (n) White (w)

$63.00

Primer + Black (Texas) (0) $138.00Primer + Red (Texas) (1) $296.00Primer + Desert Tan (Texas) (8) Primer + Tractor Green (Texas) (2) Primer + White (Texas) (3)

$338.00

Primer + Equipment Yellow (Texas) (4) Primer + Tractor Orange (Texas) (5) $355.00

Primer + Grey (Texas) (6) $388.00

Page 58 of 131 Printed 02/27/2017

5" Channel Carhauler (C5) Options

Axle Options:32CD (2) 3,500# (Dexter) One Electric / Drop Axle² $283.00 32CS * (2) 3,500# (Dexter) One Electric / Spring Included 32CT (2) 3,500# (Dexter) One Electric / Torsion² $283.00 32DS (2) 3,500# (Dexter) Idler / Spring ($172.00) 32ED (2) 3,500# (Dexter) Electric / Drop Axle² $458.00 32ES (2) 3,500# (Dexter) Electric / Spring $175.00 32ET (2) 3,500# (Dexter) Electric / Torsion² $458.00

32MS (2) 3,500# (Dexter)Surge Hyd. Drum [Surge Coupler] 1 Brake 1 Drag /Spring²

$788.00


Tail Options:S* Straight Deck w/ 5' Slide-in Ramps Incl. 2 2' Dovetail w/ 5' Slide-in Ramps $48.00 4 4' Dovetail w/ 5' Slide-in Ramps $48.00 A 2' Dovetail w/ 2 Fold-up Ramps $95.00 B Straight Deck w/ 4' Split Heavy Duty Gate $394.00 C Straight Deck w/ 2 Fold-up Ramps $48.00 D 4' Dovetail w/ 2 Fold-up Ramps $95.00 E 2' Dovetail w/ 3 Fold-up Ramps $189.00 F Straight Deck w/ Fold In Gate $268.00 G Straight Deck w/ 4' Fold-up Gate $200.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $314.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $361.00 K 2' Dovetail w/ Split Heavy Duty Gate $441.00 M 4' Dovetail w/ Split Heavy Duty Gate $441.00 N 2' Dovetail w/ 5' Rear Slide-in Ramps $149.00 P 4' Dovetail w/ 5' Rear Slide-in Ramps $216.00 R Straight Deck w/ Rear Slide-in Ramps $101.00

Other Options:0 Cold Weather Wiring Harness (Paris Only) $27.50 2 Upgrade to 225/75 R15 on 3.5k Axles $88.75 3 10k Jack (Bumper Pull) $132.50 4 Plate for Winch $145.00 7 Upgrade to 7k Jack $88.75 8 2 Stake Pockets In Front of Trailer $12.50 9 4ft Expanded Metal Sides (Removable) $47.81 / ft A Side Mount ATV Ramps (12ft or Longer) $95.00 B 12"oc Crossmembers $382.50 C 4ft Solid Metal Sides (Removable) $47.81 / ft E Rough Oak Floor (Paris and Ohio Only) $15.63 / ft F Steel Diamond Plate Fenders $0.00 G 4ft Side Gate (14ft or longer) $172.50 H Landscape Toolbox (must have 2ft or 4ft Sides) $272.50 K Expanded Metal Chain Tray $75.00 M Open Pit Steel Floor w/4 Flushmount D-Rings $322.50 N Diamond Plate Running Boards (Paris ONLY) $9.38 / ft P 2" Pipetop Siderails (Removable) $22.81 / ft Q Rubrail $5.00 / ft R U8 Side Rail (Removable) $15.00 / ft S 11ga(1/8") DP Steel Floor w/ 4 Flushmount D-Rings &

16"oc$29.06 / ft

T Mount Only for Spare Tire $33.75 U Rear Trailer Support Jacks $106.25 V Spare Tire and Mount $130.00 X 16"oc Crossmembers $190.00 Z 22" Solid Metal Sides w/ 2" pipe-top (Removable) $32.19 / ft -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -TB01 Front Toolbox (with 7k Jack) $277.50


Page 59 of 131 Printed 02/27/2017


(763) 434-2277 5" Channel Equipment (CE)

C E J 1 6 5 2 E S S K1 2 3 4 5 6 7 8 9 10 11 Other

CEJ1252ESSK 12' x 5" Channel Equipment $3,378.00






Standard Features• 9,990 lb. G.V.W.R.• 5,200 lb. x 2 G.A.W.R.• BP 2 5/16" Adjustable (14,000 lb.)• Safety Chains• 1 - Drop Leg Jack (8,000 lb.)• 2 - Dexter E- Z lube Brake Axle (5,200 lb.)• 6 Leaf Slipper Spring Suspension• 4 -15" White Spoke Wheels• 4 - 225/75R15 Radial Tires• Stake Pockets• Electric Breakaway Kit w/ Charger• 9" x 72" Treadplate Removable Steel Fenders

• 5' Channel Ramps w/ Holder• Dual Bulldog Rear Support Jacks• 5" Channel Frame & Tongue• 3" Channel Crossmembers 16" on Center• 2" Treated Pine Lumber Deck• 83" Wide Deck (Except with Drop or Torsion Axles)• DOT Approved Flushmount Lifetime LED Lights• Sealed Wire Harness• Sand Blasted, Acid Washed, Powder Coated• • 5 year Dexter Axle Warranty

Trailer will have 80" Frame with Torsion or Drop Axles Bumper Pull .Tongue Length (3' 5").

Coupler Options:J* BP 2 5/16" Adjustable (14,000 lb.) Incl. A BP 2 5/16" A-Frame $0.00 B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $55.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 V BP 2 5/16" Adj. (14,000 lb.) w/8 Hole Chan Bracket $66.00 W 3" Pintle Eye Chan Mnt (20k lb.) w/8 Hole Ch Brckt $66.00 X HD 2 5/16" Adj Ch Mnt 3 Bolt 20k w/8 Hole Ch Brckt $86.00


Powder Coat Color Options:Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00Desert Tan (t) Equipment Yellow (y) Grey (g) Red (r) Tractor Green (j) Tractor Orange (n) White (w)

$63.00


$338.00



Page 60 of 131 Printed 02/27/2017

5" Channel Equipment (CE) Options

Axle Options:52ED (2) 5,200# (Dexter) Electric / Drop Axle $165.00 52ES * (2) 5,200# (Dexter) Electric / Spring Included 52ET (2) 5,200# (Dexter) Electric / Torsion $283.00

52HS (2) 5,200# (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring $1,618.00

52SD (2) 5,200# (Dexter)Surge Hydraulic Drum [Surge Coupler] / DropAxle

$1,038.00

52SS (2) 5,200# (Dexter)Surge Hydraulic Drum [Surge Coupler] / Spring $873.00

52ST (2) 5,200# (Dexter)Surge Hydraulic Drum [Surge Coupler] / Torsion $1,155.00

Tail Options:S* Straight deck w/ 5' Slide-in Ramps Incl. 2 2' Dovetail w/ 5' Slide-in Ramps $48.00 4 4' Dovetail w/ 5' Slide-in Ramps $48.00 A 2' Dovetail w/ 2 Fold-up Ramps $95.00 B Straight Deck w/ 4' Split Heavy Duty Gate $394.00 C Straight Deck w/ 2 Fold-up Ramps $48.00 D 4' Dovetail w/ 2 Fold-up Ramps $95.00 E 2' Dovetail w/ 3 Fold-up Ramps $189.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $314.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $361.00 K 2' Dovetail w/ Split Heavy Duty Gate $441.00 L 4' Dovetail w/ 4' Heavy Duty Gate $361.00 M 4' Dovetail w/ Split Heavy Duty Gate $441.00 N 2' Dovetail w/ 5' Rear Slide-in Ramps $149.00 P 4' Dovetail w/ 5' Rear Slide-in Ramps $216.00 R Straight Deck w/ Rear Slide-in Ramps $101.00 U 2' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $145.00 V 2' Dovetail w/ 31x66 HD Fold-up Ramps $574.00 W Straight Deck w/ 5' Dbl Hinge Fold-up Ramps $98.00

Other Options:0 Cold Weather Wiring Harness (Texas & Ohio Only) $27.50 3 10k Jack (Bumper Pull) $132.50 4 Plate for Winch $145.00 5 Upgrade to 235/80 R16 on 52k Axles $122.50 8 2 Stake Pockets In Front of Trailer $12.50 9 4ft Expanded Metal Sides (Removable) $47.81 / ft A Side Mount ATV Ramps (12ft or Longer)(Must Incl.

Option R)$95.00

B 12"oc Crossmembers $191.25 C 4ft Solid Metal Sides (Removable) $47.81 / ft E Rough Oak Floor (Texas and Ohio Only) $15.63 / ft G 4ft Side Gate (14ft or longer) $172.50 H Landscape Toolbox (must have 2ft or 4ft Sides) $272.50 J Receiver Hitch $76.25 K Expanded Metal Chain Tray $75.00 L U8 Side Rail w/Expanded Metal (Removable) $29.06 / ft N Diamond Plate Running Boards (Texas Only) $9.38 / ft P 2" Pipetop Siderails (Removable) $22.81 / ft Q Rubrail $5.00 / ft R U8 Side Rail (Removable) $15.00 / ft S 11ga(1/8") DP Steel Floor w/ 4 Flushmount D-Rings $29.06 / ft T Mount Only for Spare Tire $33.75 V Spare Tire and Mount $130.00 Z 22" Solid Metal Sides w/ 2" pipe-top (Removable) $32.19 / ft -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -BWPF Blackwood Pro Full Deck $30.31 / ft -BWPO Blackwood Pro Outer Deck $19.69 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -FE05 Weld on Fenders $67.50 -LB01 Douglas Fir Lumber (Texas & Ohio Only) $8.13 / ft -TB01 Front Toolbox $188.75

Page 61 of 131 Printed 02/27/2017


(763) 434-2277 6" Channel Equipment (CC)

C C J 1 6 7 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

CCJ1072BSSK 10' x 6" Channel Equipment $4,171.00








Standard Features• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Stake Pockets• Electric Breakaway Kit w/ Charger• 9" x 72" Treadplate Removable Steel Fenders• 5' Channel Ramps w/ Holder

• Dual Bulldog Rear Support Jacks• 6" Channel Frame & Tongue• 3" Channel Crossmembers 16" on Center• 2" Treated Pine Lumber Deck• 83" Wide Deck• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• Tool Tray In Tongue• GN Option Equipped with 2 Jacks• GN Equipped w/Lockable Front Toolbox• 5 year Dexter Axle Warranty

*** 8" I-beam on Goosenecks ****** MAX GVWR Rating 24,000 with Triple 8k Axle Option and 24k+ Rated Coupler. ***Trailer will have 80" Frame with 8k, 7k Hydraulic Disc Brake, Torsion and Drop Axles.


Coupler Options:J* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $88.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,245.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $1,245.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,245.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,025.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,025.00 T HD 2 5/16" Adj.3 Bolt Coupler w/6 hole Chn Bracket $54.00




$338.00


$355.00


Page 62 of 131 Printed 02/27/2017

6" Channel Equipment (CC) Options

Axle Options:52BS (2) 5,200# (Dexter) Electric / Spring ($67.00) 52BT (2) 5,200# (Dexter) Electric / Torsion $214.00 52CS (2) 5,200# (Dexter) One Electric / Spring ($171.00)

52GS (2) 5,200# (Dexter)Elec/Hyd Drum (1,000 PSI Pump) / Spring $696.00

72BD (2) 7,000# (Dexter) Electric / Drop Axle² $180.00 72BS * (2) 7,000# (Dexter) Electric / Spring Included 72BT (2) 7,000# (Dexter) Electric / Torsion $285.00





73BS (3) 7,000# (Dexter) Electric / SpringFenders Not Removable

$986.00

73BT (3) 7,000# (Dexter) Electric / Torsion Fenders Not Removable

$1,414.00

73HS (3) 7,000# (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring² Fenders Not Removable

$3,263.00



92GS (2) 7,000# w/235/85R16 LR-G Tires (Dexter)Elec/Hyd Drum (1,000 PSI Pump) / Spring² $1,895.00


93BS (3) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric / Spring Fenders Not Removable

$2,048.00

93BT (3) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric / Torsion Fenders Not Removable

$2,078.00

93HS (3) 7,000# w/235/85R16 LR-G Tires (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring² Fenders Not Removable

$3,761.00


B2HS (2) 8,000# Oil Bath Axles, 235/80 Tires (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring² $2,828.00

K2BT (2) 8,000# Oil Bath w/215/75R17.5 LR-HSingles(Dexter)Electric / Torsion²

$3,250.00



83BS (3) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter)Electric / Spring² Fenders Not Removable

$3,600.00

Tail Options:S* Straight deck w/ 5' Slide-in Ramps Incl. 5 3.5' Dovetail w/2 Monster Ramps $563.00 A 2' Dovetail w/ 5' Slide-in Ramps $55.00 B 2' Dovetail w/ 5' Fold-up Ramps $111.00 C Straight deck w/ 5' Fold-up Ramps $55.00 D 2' Dovetail w/ 31x66 HD Fold-up Ramps $583.00 E 4' Dovetail w/ 5' Slide-in Ramps $55.00 F 4' Dovetail w/ 5' Fold-up Ramps $111.00 G 2' Dovetail w/ 3 5' Fold-up Ramps $205.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $314.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $370.00 K 2' Dovetail w/ Split Heavy Duty Gate $449.00 M 2' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $161.00 N 2' Dovetail w/ 5' Rear Slide-in Ramps $158.00 P 4' Dovetail w/ 5' Rear Slide-in Ramps $224.00 R Straight Deck w/ Rear Slide-in Ramps $101.00 T Straight deck w/ 31x66 HD Fold-up Ramps $526.00 W 4' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $161.00 X Straight deck w/ 3 5' Fold-up Ramps $149.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 2 2nd Jack (Bumper Pull) $198.75 4 Plate for Winch $145.00 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $6.88 / ft B Rubrail $5.00 / ft C 12"oc Crossmembers $191.25 E Rough Oak Floor $15.63 / ft H Receiver Hitch $76.25 M 2 3/8" Pipetop on Siderails (Removable) $22.81 / ft N Diamond Plate Running Boards $9.38 / ft P 11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings &

12"oc$46.25 / ft

Q Front Toolbox (Bumper Pull) $191.25 T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $643.75 V Rear Trailer Support Jacks $106.25 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Z 3" X 3" Square Tubing Top Rail (Removable) $22.81 / ft -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -FR01 Fork Rack $265.00 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $317.50 -TB03 Top Riser Toolbox $465.00


Page 63 of 131 Printed 02/27/2017


(763) 434-2277 8" Channel Equipment (C8)

C 8 A 2 0 7 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

C8A1672BSSK 16' x 8" Channel Equipment $4,863.00













Standard Features• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Stake Pockets• Electric Breakaway Kit w/ Charger• 9" x 72" Treadplate Removable Steel Fenders• 5' Channel Ramps w/ Holder

• Dual Bulldog Rear Support Jacks• 8" Channel Frame & Tongue• 3" Channel Crossmembers 16" on Center• 2" Treated Pine Lumber Deck• 83" Wide Deck• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• Tool Tray In Tongue• GN Option Equipped with 2 Jacks• GN Equipped w/Lockable Front Toolbox• 5 year Dexter Axle Warranty

*** 24' and up has 12" I-beam Neck. ****** MAX GVWR Rating 24,000 with Triple 8k Axle Option and 24k+ Rated Coupler. ***Trailer will have 80" Frame with 8k, 7k Hydraulic Disc Brake, Torsion and Drop Axles.

Bumper Pull Tongue Length (4' 9"), Gooseneck Length ( 8' 4").

Coupler Options:A* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $88.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,245.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,245.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,025.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,025.00




$338.00


$355.00


Page 64 of 131 Printed 02/27/2017

8" Channel Equipment (C8) Options

Axle Options:72BD (2) 7,000# (Dexter) Electric / Drop Axle² $180.00 72BS * (2) 7,000# (Dexter) Electric / Spring Included 72BT (2) 7,000# (Dexter) Electric / Torsion $285.00




73BD (3) 7,000# (Dexter) Electric / Drop Axle² Fenders Not Removable

$1,256.00

73BS (3) 7,000# (Dexter) Electric / Spring Fenders Not Removable

$986.00

73BT (3) 7,000# (Dexter) Electric / Torsion Fenders Not Removable

$1,414.00







93BS (3) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric / Spring² Fenders Not Removable

$2,048.00

93BT (3) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric / Torsion² Fenders Not Removable

$2,078.00

93HS (3) 7,000# w/235/85R16 LR-G Tires (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring² Fenders Not Removable

$3,761.00


82BS (2) 8,000# Oil Bath w/235/85R16 LR-G Tires(Dexter)Electric / Spring²

$1,743.00

82BT (2) 8,000# Oil Bath w/235/85R16 LR-G Tires(Dexter)Electric / Torsion²

$2,505.00

82HS (2) 8,000# Oil Bath w/235/85R16 LR-G Tires(Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring²

$3,213.00

83BS (3) 8,000# Oil Bath w/235/85R16 LR-G Tires(Dexter)Electric / Spring² Fenders Not Removable

$3,600.00

Tail Options:S* Straight deck w/ 5' Slide-in Ramps Incl. 5 3.5' Dovetail w/2 Monster Ramps $563.00 A 2' Dovetail w/ 5' Slide-in Ramps $55.00 B 2' Dovetail w/ 5' Fold-up Ramps $111.00 C Straight deck w/ 5' Fold-up Ramps $55.00 D 2' Dovetail w/31x66 HD Fold-up Ramps $583.00 E 4' Dovetail w/ 5' Slide-in Ramps $55.00 F 4' Dovetail w/ 5' Fold-up Ramps $111.00 G 2' Dovetail w/ 3 5' Fold-up Ramps $205.00 K 2' Dovetaill w/ Split Heavy Duty Gate $449.00 M 2' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $161.00 N 2' Dovetail w/ 5' with Rear Slide-in Ramps $158.00 P 4' Dovetail w/ 5' with Rear Slide-in Ramps $224.00 T Straight deck w/ 5' Rear Slide-in Ramps $101.00

Other Options:0 Cold Weather Wiring Harness (7-way RV) $27.50 2 2nd Jack (Bumper Pull) $198.75 4 Plate for Winch $145.00 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $6.88 / ft 8 ¼" DP Steel Floor w/ 4 Flushmount D-Rings & 12"oc $86.25 / ft 9 9,990 G.V.W.R. $0.00 B Rubrail $5.00 / ft C 12"oc Crossmembers $191.25 E Rough Oak Floor $15.63 / ft H Receiver Hitch $76.25 M 2 3/8" Pipetop on Siderails (Removable) $22.81 / ft N Diamond Plate Running Boards $9.38 / ft P 11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings &

12"oc$46.25 / ft

Q Front Toolbox (Bumper Pull) $191.25 R 102" Deck Width $917.50 S Mount Only for Spare Tire $33.75 T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $643.75 V Rear Trailer Support Jacks $106.25 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Y HD Semi Trailer 2x Jacks (25,000 lb.) $535.00 Z 3" X 3" Square Tubing Top Rail (Removable) $22.81 / ft -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $432.50 -TB03 Top Riser Toolbox $465.00


Page 65 of 131 Printed 02/27/2017


(763) 434-2277 Angle Pipetop Trailer (P6)

P 6 2 1 6 3 2 C S S K1 2 3 4 5 6 7 8 9 10 11 Other

P621432CSSK 14' Angle Pipetop Trailer $2,820.00




Standard Features• 7.000 lb. G.V.W.R.• 3,500 lb. x 2 G.A.W.R.• 2" A-Frame Bulldog Coupler• Safety Chains• 1 - Bulldog Pipe Mount Swivel Jack (5,000 lbs.)• 2 Dexter E-Z lube Axles, Idler & Brake (3,500 lb)• 4 Leaf Double Eye Spring Suspension• 4 - 15" White Spoke Wheels• 4 - 205/75R15 Radial Tires• Defender 2 Electric Breakaway Kit w/ Charger

• 5' Channel Ramps w/ Holder• 2x3 Angle Upright• 2 3/8 Pipe Top Rail• 4" Channel Wrap Tongue & 2" x 3" Angle Frame• 2x3 Angle 24" on Center• 2" Treated Pine Lumber Deck• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• 5 year Dexter Axle Warranty

*** MAX GVWR 7,000 ***Bumper Pull Tongue Length (4').

Coupler Options:2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame (12,500lb.) $33.00 D BP 2" Adjustable $106.00 J BP 2 5/16" Adjustable $123.00




$338.00


$355.00


Page 66 of 131 Printed 02/27/2017

Angle Pipetop Trailer (P6) Options


Tail Options:S* Straight deck w/ 5' Slide-in Ramps Incl. A 2' Dovetail w/ 5' Slide-in Ramps $89.00 B 2' Dovetail w/ 5' Fold-up Ramps $136.00 C Straight deck w/ 5' Fold-up Ramps $48.00 F Straight Deck w/ Fold In Gate $268.00 G Straight Deck w/ 4' Fold-up Gate $200.00 K 2' Dovetaill w/ Split Heavy Duty Gate $483.00 X 2' Dovetail w/ 4' Fold-up Gate $289.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $22.50 2 Upgrade to 225/75 R15 on 3.5k Axles (5.2k Fenders) $88.75 3 10k Jack (Bumper Pull) $132.50 B 2x3 Angle 16" on Center Crossmember Upgrade $102.50 R Rubrail $5.00 / ft S Mount Only for Spare Tire $33.75 T Spare Tire and Mount $130.00 V Rear Trailer Support Jacks $106.25 -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -BWPF Blackwood Pro Full Deck $30.31 / ft -BWPO Blackwood Pro Outer Deck $19.69 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DM02 2 Extra Pair Flushmount D-Rings on Steel Floor $80.00 -DR01 1 Pair D-Rings $40.00 -DR02 2 Pair D-Rings $80.00 -LB01 Douglas Fir Lumber (Texas & Ohio Only) $8.13 / ft -TB01 Front Toolbox (with 7k Jack) $325.00 -WP03 Winch Plate w/ Welded Receiver Hitch $221.25

Page 67 of 131 Printed 02/27/2017



P 7 A 1 6 5 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

P7A1052BSSK 10' Angle Pipetop Trailer $3,534.00






Standard Features• 9.990 lb. G.V.W.R.• 5,200 lb. x 2 G.A.W.R.• 2 5/16" A-Frame Bulldog Coupler• Safety Chains• 1 - Jack (7,000 lb.)• 2 - Dexter E- Z lube Brake Axles (5,200 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 15" White Spoke Wheels• 4 - 225/75R15 Radial Tires• Dual Bulldog Rear Support Jacks• Electric Breakaway Kit w/ Charger

• 5' Channel Ramps w/ Holder• 2x3 Angle Upright• 2 7/8 Pipe Top Rail• 5" Channel Tongue & 3" x 5" Angle Frame• 2x3 Angle 24" on Center• 2" Treated Pine Lumber Deck• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• 5 year Dexter Axle Warranty

*** MAX GVWR 10,400 ***Bumper Pull Tongue Length (4').

Coupler Options:A* BP 2 5/16" A-Frame (12,500lb.) Incl. J BP 2 5/16" Adjustable $123.00




$338.00


$355.00


Page 68 of 131 Printed 02/27/2017


Axle Options:52BS * (2) 5,200# (Dexter) Electric / Spring Included 52CS (2) 5,200# (Dexter) One Electric / Spring ($219.00)


Tail Options:S* Straight deck w/ 5' Slide-in Ramps Incl. A 2' Dovetail w/ 5' Slide-in Ramps $89.00 B 2' Dovetail w/ 5' Fold-up Ramps $136.00 C Straight deck w/ 5' Fold-up Ramps $48.00 K 2' Dovetaill w/ Split Heavy Duty Gate $483.00

Other Options:2 Upgrade to 225/75 R15 on 3.5k Axles (5.2k Fenders) $88.75 3 10k Jack (Bumper Pull) $132.50 5 Upgrade to 235/80 R16 on 52k Axles $122.50 A Upgrade to 3" X 3" Square Tubing Top Rail $0.00 B 2x3 Angle 16" on Center Crossmember Upgrade $102.50 H Receiver Hitch $76.25 S Mount Only for Spare Tire $33.75 T Spare Tire and Mount $198.75 V Rear Trailer Support Jacks $106.25 -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -EL01 Add 7-Way RV Plug to Rear Bumper $105.00


Page 69 of 131 Printed 02/27/2017



P 8 J 1 6 7 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

P8J1272BSSK 12' Angle Pipetop Trailer $4,171.00







Standard Features• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Jack (7,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Dual Bulldog Rear Support Jacks• Electric Breakaway Kit w/ Charger• 5' Channel Ramps w/ Holder

• 2x3 Angle Upright• 2 7/8 Pipe Top Rail• 5" Channel Tongue & 3" x 5" Angle Frame• 3" Channel Crossmembers 16" on Center• 2" Treated Pine Lumber Deck• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• GN Option Equipped with 2 Jacks• GN Equipped w/Lockable Front Toolbox• 5 year Dexter Axle Warranty

Trailer will have 80" Frame with 8k, 7k Hydraulic Disc Brake, Torsion and Drop Axles.*** MAX GVWR 16,000 with 8k axles and 16k+ Rated Coupler. ***Bumper Pull Tongue Length (3' 9"), Gooseneck Length (8' 5").

Coupler Options:J* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $88.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,378.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,245.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $1,245.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,245.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,025.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,025.00




$338.00


$355.00


Page 70 of 131 Printed 02/27/2017


Axle Options:52BS (2) 5,200# (Dexter) Electric / Spring ($60.00) 52CS (2) 5,200# (Dexter) One Electric / Spring ($157.00) 72BD (2) 7,000# (Dexter) Electric / Drop Axle $161.00 72BS * (2) 7,000# (Dexter) Electric / Spring Included 72BT (2) 7,000# (Dexter) Electric / Torsion $254.00 72CS (2) 7,000# (Dexter) One Electric / Spring ($56.00)

72HS (2) 7,000# (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring $1,355.00





92GS (2) 7,000# w/235/85R16 LR-G Tires (Dexter)Elec/Hyd Drum (1,000 PSI Pump) / Spring $1,895.00

92HS (2) 7,000# w/235/85R16 LR-G Tires (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring $1,850.00

Tail Options:S* Straight deck w/ 5' Slide-in Ramps Incl. A 2' Dovetail w/ 5' Slide-in Ramps $89.00 B 2' Dovetail w/ 5' Fold-up Ramps $136.00 C Straight deck w/ 5' Fold-up Ramps $48.00 K 2' Dovetaill w/ Split Heavy Duty Gate $483.00

Other Options:3 10k Jack (Bumper Pull) $132.50 5 Add Expanded Metal to Sides $15.00 / ft 6 6" Taller GN Riser $153.75 A Upgrade to 3" X 3 $0.00 4 Plate for Winch $145.00 C 12"oc Crossmembers $191.25 E Rough Oak Floor $18.75 / ft H Receiver Hitch $76.25 P 11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings &

12"oc$46.25 / ft

Q Front Toolbox (Bumper Pull) $191.25 S Mount Only for Spare Tire $33.75 T Spare Tire and Mount $198.75 V Rear Trailer Support Jacks $106.25 W Warn M12000 Winch w/Plate & Battery $2,670.00 -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -EL01 Add 7-Way RV Plug to Rear Bumper $105.00 -LT10 Light Bar w/4 Lights $332.50 -TB03 Top Riser Toolbox $465.00


Page 71 of 131 Printed 02/27/2017


(763) 434-2277 5" Channel Buggy Hauler (B5)

B 5 2 1 6 3 2 C S S K1 2 3 4 5 6 7 8 9 10 11 Other

B521632CSSK 16' x 5" Channel Buggy Hauler $3,264.00




Standard Features• 7,000 lb. G.V.W.R.• 3,500 lb. x 2 G.A.W.R.• 2" Ball Bulldog Coupler• Safety Chains• 1 - Top Wind Drop-Leg Jack (8,000 lb.)• 2 Dexter E-Z lube Axles, Idler & Brake (3,500 lb)• 4 Leaf Double-eye Spring Suspension• 4 - NEW 15" White Spoke Wheels• 4 -ST205/75R15 Radial Tires (1,820 lb)• Electric Breakaway Kit w/ Charger• Rubrail & Stake Pockets

• 9" High Drive Over DP Steel Fenders• 5' Channel Ramps w/ Holder• 5" Channel Frame & Tongue• 3" Channel Crossmembers 24" on Center• 2" Treated Pine Lumber Deck• 102" Wide Deck• DOT Approved Flushmount LED Lights• Sealed Wire Harness• Sand Blasted, Acid Washed, Powder Coated• 82 1/2 " Between the Fenders• 5 year Dexter Axle Warranty

*** MAX GVWR 10,400 with 5200 lb Axle Option. ***Bumper Pull Tongue Length (3' 10").

Coupler Options:2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $33.00 D BP 2" Adjustable $106.00 J BP 2 5/16" Adjustable $106.00 M BP 2" Atwood Style A-Frame Coupler $0.00 N BP 2 5/16" Atwood Style A-Frame Coupler $33.00 P 3" Pintle Eye - Channel-mount (14,000 lb.) $106.00


Powder Coat Color Options:Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00Desert Tan (t) Equipment Yellow (Texas & Ohio) (y) Grey (g) Red (r) Tractor Green (j) Tractor Orange (n) White (w)

$63.00


$338.00



Page 72 of 131 Printed 02/27/2017

5" Channel Buggy Hauler (B5) Options



52CS (2) 5,200# (Dexter) One Electric / Spring $300.00 52ES (2) 5,200# (Dexter) Electric / Spring $533.00


Tail Options:S* Straight Deck w/ 5' Slide-in Ramps Incl. 2 2' Dovetail w/ 5' Slide-in Ramps $60.00 3 2' Dovetail w/ 5' Slide-in Ramps and Fold-up Gate $359.00 A 2' Dovetail w/ 2 Fold-up Ramps $121.00 C Straight Deck w/ 2 Fold-up Ramps $60.00 G Straight Deck w/ 4' Fold-up Gate $239.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $414.00 N 2' Dovetail w/ 5' Rear Slide-in Ramps $163.00 R Straight Deck w/ Rear Slide-in Ramps $101.00

Other Options:3 10k Jack (Bumper Pull) $132.50 4 Plate for Winch $145.00 C 12" oc Crossmembers $382.50 P 2" Pipetop Siderails (Removable) $22.81 / ft S 11ga(1/8) DP Steel Floor w/4 Flushmount D-Rings &

16"oc$29.06 / ft

T Mount Only for Spare Tire $33.75 U Rear Trailer Support Jacks $106.25 V Spare Tire and Mount $130.00 X 16"oc Crossmembers $190.00 -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -RT01 Rate at 9900 GVWR $0.00


Page 73 of 131 Printed 02/27/2017


(763) 434-2277 6" Channel Super-Wide (B6)

B 6 J 1 6 7 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

B6J1672BSSK 16' x 6" Channel Super-Wide $5,278.00





Standard Features• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Electric Breakaway Kit w/ Charger• 5' Channel Ramps w/ Holder• Dual Bulldog Rear Support Jacks• 6" Channel Frame & Tongue

• 3" Channel Crossmembers 16" on Center• 2" Treated Pine Lumber Deck• 102 Wide Deck• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• Fender Rating: 4,000 lbs/ea• Rubrail w/Stake Pockets• Tool Tray In Tongue• DOT Approved Flushmount Lifetime LED Lights• GN Option Equipped with 2 Jacks• 82 1/2 " Between the Fenders• GN Equipped w/Lockable Front Toolbox• 5 year Dexter Axle Warranty

*** 8" I-beam on Goosenecks. ***Triple Axle Option Available on 20' and longer.

Trailer is 81" wide between the fenders.Trailer will have 80" between fenders with 8k, 7k Hydraulic Disc Brake, Torsion and Drop Axles.

*** MAX GVWR 16,500 with 8k Axle Option and 16.5k+ Rated Coupler. ***Bumper Pull Tongue Length (4' 7").





$338.00


$355.00


Page 74 of 131 Printed 02/27/2017

6" Channel Super-Wide (B6) Options

Axle Options:52BS (2) 5,200# (Dexter) Electric / Spring² ($67.00) 72BS * (2) 7,000# (Dexter) Electric / Spring Included 72BT (2) 7,000# (Dexter) Electric / Torsion² $285.00


73BS (3) 7,000# (Dexter) Electric / Spring $1,384.00







$4,223.00



Tail Options:S* Straight deck w/ 5' Slide-in Ramps Incl. A 2' Dovetail w/ 5' Slide-in Ramps $69.00 B 2' Dovetail w/ 5' Fold-up Ramps $136.00 C Straight deck w/ 5' Fold-up Ramps $69.00 D 2' Dovetail w/ 31x66 HD Fold-up Ramps $595.00 E 4' Dovetail w/ 5' Slide-in Ramps $69.00 F 4' Dovetail w/ 5' Fold-up Ramps $136.00 G 2' Dovetail w/ 3 5' Fold-up Ramps $230.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $353.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $421.00 K 2' Dovetail w/ Split Heavy Duty Gate $501.00 L 3.5' Dovetail w/2 Monster Ramps $688.00 M 2' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $186.00 N 2' Dovetail w/ 5' Rear Slide-in Ramps $170.00 P 4' Dovetail w/ 5' Rear Slide-in Ramps $239.00 R Straight Deck w/ Rear Slide-in Ramps $101.00 T Straight deck w/ 31x66 HD Fold-up Ramps $526.00 U 4' Dovetail w/ Split Heavy Duty Gate $501.00 V 4' Dovetail w/ 31x66 HD Fold-up Ramps $595.00 W 4' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $186.00 X Straight deck w/ 3 5' Fold-up Ramps $163.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 2 2nd Jack (Bumper Pull) $198.75 4 Plate for Winch $145.00 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $8.13 / ft 8 ¼" DP Steel Floor w/ 4 Flushmount D-Rings & 12"oc $86.25 / ft 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $191.25 E Rough Oak Floor $21.25 / ft H Receiver Hitch $76.25 M 2 3/8" Pipetop Siderails (Removable) $22.81 / ft P 11ga(1/8")DP Steel Floor w/ 4 Flushmount D-Rings &

12"oc$46.25 / ft

Q Front Toolbox (Bumper Pull) $191.25 S Mount Only for Spare Tire $33.75 T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $643.75 V Rear Trailer Support Jacks $106.25 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Z 3" X 3" Square Tubing Top Rail (Removable) $22.81 / ft -BWFL Blackwood Classic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -CP08 Upgrade to 8 Hole Channel Adjustable Coupler $33.75 -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -EL01 Add 7-Way RV Plug to Rear Bumper $105.00 -GT10 Ramp Gate Transition Lip $67.50 -LT10 Light Bar w/4 Lights $332.50 -OD01 1 Pair Flushmount D-Rings on Steel Outer Deck $40.00 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -SEM3 2 3/8" Pipetop w/Expanded Metal Sides (Removable) $38.44 / ft -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $432.50 -TB03 Top Riser Toolbox $465.00


Page 75 of 131 Printed 02/27/2017


(763) 434-2277 8" Channel Super-Wide (B8)

B 8 J 2 0 7 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other














Standard Features• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Electric Breakaway Kit w/ Charger• 5' Channel Ramps w/ Holder• Dual Bulldog Rear Support Jacks

• 8" Channel Frame & Tongue• 3" Channel Crossmembers 16" on Center• 2" Treated Pine Lumber Deck• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• Rubrail w/Stake Pockets• Tool Tray In Tongue• 81" Between the Fenders• GN Option Equipped with 2 Jacks• GN Equipped w/Lockable Front Toolbox• 5 year Dexter Axle Warranty

*** 24' and up has 12" I-beam Neck. ***Trailer will have 80" between fenders with 8k, 7k Hydraulic Disc Brake, Torsion and Drop Axles.

*** MAX GVWR 24,000 with Triple 8k Axles and 24k+ Rated Coupler. ***Bumper Pull Tongue Length (5').





$338.00


$355.00


Page 76 of 131 Printed 02/27/2017

8" Channel Super-Wide (B8) Options











93BT (3) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric / Torsion $2,078.00




$2,753.00





Tail Options:S* Straight deck w/ 5' Slide-in Ramps Incl. A 2' Dovetail w/ 5' Slide-in Ramps $69.00 B 2' Dovetail w/ 5' Fold-up Ramps $136.00 C Straight deck w/ 5' Fold-up Ramps $69.00 D 2' Dovetail w/ 31x66 HD Fold-up Ramps $595.00 E 4' Dovetail w/ 5' Slide-in Ramps $69.00 F 4' Dovetail w/ 5' Fold-up Ramps $136.00 G 2' Dovetail w/ 3 5' Fold-up Ramps $230.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $353.00 J 2 Dovetail w/ 4' Heavy Duty Fold-up Gate $421.00 L 3.5' Dovetail w/2 Monster Ramps $688.00 M 2' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $186.00 N 2' Dovetail w/ 5' Rear Slide-in Ramps $170.00 P 4' Dovetail w/ 5' Rear Slide-in Ramps $239.00 R Straight Deck w/ Rear Slide-in Ramps $101.00 T Straight deck w/ 31x66 HD Fold-up Ramps $526.00 V 4' Dovetail w/ 31x66 HD Fold-up Ramps $595.00 W 4' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $186.00 X Straight deck w/ 3 5' Fold-up Ramps $163.00

Other Options:0 Cold Weather Wiring Harness (7-way RV) $27.50 2 2nd Jack (Bumper Pull) $198.75 4 Plate for Winch $145.00 6 6" Taller GN Riser $153.75 7 Douglas Fir Lumber $8.13 / ft 8 ¼" DP Steel Floor w/ 4 Flushmount D-Rings & 12"oc $86.25 / ft C 12"oc Crossmembers $191.25 E Rough Oak Floor $21.25 / ft H Receiver Hitch $76.25 M 2 3/8" Pipetop Siderails (Removable) $22.81 / ft P 11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings &

12"oc$46.25 / ft

Q Front Toolbox (Bumper Pull) $191.25 S Mount Only for Spare Tire $33.75 T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $643.75 V Rear Trailer Support Jacks $106.25 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 -BWFL Blackwood Classsic Full Deck $26.25 / ft -BWOT Blackwood Classic Outer Deck $15.63 / ft -CP08 Upgrade to 8 Hole Channel Adjustable Coupler $33.75 -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -OD01 1 Pair Flushmount D-Rings on Steel Outer Deck $40.00 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $432.50 -SM02 2 Extra Side Marker Lights, 1 Per Side $67.50 -TB03 Top Riser Toolbox $465.00


Page 77 of 131 Printed 02/27/2017


(763) 434-2277 60" Utility Dump (D5)

D 5 A 0 8 5 1 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

D5A0851BSSK 8' x 60" Utility Dump $3,840.00

D5A1051BSSK 10' x 60" Utility Dump $4,029.00

Standard Features• 5,200 lb. G.V.W.R.• 5,200 lb. x 1 G.A.W.R.• 2" Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (7,000 lb.)• 1 - Dexter E- Z lube Brake Axle (5,200 lb.)• 6 Leaf Double-eye Spring Suspension• 2 - 15" White Spoke Wheels• 2 - ST225/75B15 (2540 lb)• Electric Breakaway Kit w/ Charger• 1/8" Treadplate Steel Fenders• Lockable Toolbox (Houses Battery and Pump)• Barn Door Gate w/ Camlatch• 4 - D-Rings• 40° Dump Pitch• 12VDC Hydraulic Pump

• 3" x 30" West Craft Hyd. Cylinder• 12' Control Cable• 4" Channel Main Frame & Tongue• 2" x 4" x 11ga. Tubing Bed Frame• 3" Channel Crossmembers 16"oc• Mounting Brackets for Roll-up Tarp• 10ga. Steel Bed• 5' Wide Bed• 10ga. Steel Sides• 18" High Sides• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• 5 year Dexter Axle Warranty

8' has 2.22 cubic yards capacity.10' has 2.77 cubic yards capacity.

*** MAX GVWR 10,400 with 5200 lb Axle Option and 10,400+ Rated Coupler. ***Bumper Pull Tongue Length (4' 1").

Coupler Options:A* 2" A-Frame (7,000 lb.) Incl. D BP 2 5/16" Adjustable (14,000 lb.) $125.00 P 3" Pintle Eye - Channel-mount (21,000 lb.) $125.00




$338.00


$355.00


Page 78 of 131 Printed 02/27/2017

60" Utility Dump (D5) Options

Axle Options:32BS (2) 3,500# (Dexter) Electric / Spring $508.00


51BS * (1) 5,200# (Dexter) Electric / Spring Included

51GS (1) 5,200# (Dexter)Elec/Hyd Drum (1,000 PSI Pump) / Spring² $809.00





Tail Options:S* Split Gate Incl. T Split / Spreader Gate $268.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 5 Solar Battery Charger $130.00 6 Upgrade to 235/80 R16 on 52k Axles (Tandem Only) $122.50 C 12"oc Crossmembers $130.00 M Mount Only for Spare Tire $33.75 P Tarp kit (Pull Bar) 5 x14ft $275.00 R Ramps $221.25 T Spare Tire and Mount $198.75 V 18" Side Extensions (Expanded Metal) $445.00 Y 18" Side Extensions $397.50 -DR01 1 Pair D-Rings $40.00


Page 79 of 131 Printed 02/27/2017


(763) 434-2277 72" Tandem Axle Dump (D3)

D 3 A 1 0 5 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

D3A1052BSSK 10' x 72" Tandem Axle Dump $5,715.00


Standard Features• 9,900 lb. G.V.W.R.• 5,200 lb. x 2 G.A.W.R.• 2 5/16" A Frame Coupler• Safety Chains• 1 - Drop Leg Jack (7,000 lb.)• 2 - Dexter E- Z lube Brake Axle (5,200 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 15" White Spoke Wheels• 4 - 225/75R15 Radial Tires ( lb.)• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Treadplate Steel Fenders• Toolbox• Barn Door Gate• 40° Dump Pitch

• 12VDC Hydraulic Pump• 5" x 30" West Craft Hyd. Cylinder• 12' Control Cable• 5" Channel Main Frame & Tongue• 16" On Center 3" Channel Crossmembers• 10ga. Steel Bed• 72" Wide Bed• 20" 10ga Steel Sides• DOT Approved Flushmount Lifetime LED Lights• Sealed Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• 5 year Dexter Axle Warranty

Coupler Options:A* BP 2 5/16" A-Frame (12,500lb.) Incl. D BP 2 5/16" Adjustable (14,000 lb.) $123.00 N BP 2 5/16" Atwood Style A-Frame Coupler $33.00 P 3" Pintle Eye - Channel-mount (21,000 lb.) $123.00




$338.00


$355.00


Page 80 of 131 Printed 02/27/2017

72" Tandem Axle Dump (D3) Options

Axle Options:32BS (2) 3,500# (Dexter) Electric / Spring ($280.00)




72BS (2) 7,000# (Dexter) Electric / Spring $100.00


Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 1 Upgrade to 235/80 R16 on 52k Axles $122.50 3 Upgrade to Single 10k Jack (Bumper Pull) $132.50 5 Solar Battery Charger $130.00 C 12"oc Crossmembers $130.00 E Power Up/Down & Gravity Down Upgrade $166.25 M Mount Only for Spare Tire $33.75 P Tarp kit (Pull Bar) 6 x 14ft $275.00 R Ramps w 4 D-Rings $183.75 T Spare Tire and Mount (Bumper Pull) $200.00 -DR01 1 Pair D-Rings $40.00 -GAS1 Gas Powered Hydraulic Unit $1,526.25 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $183.75 -NTBX No Tarp Mounting Brackets $0.00 -RS01 Rear Support Stands $86.25 -TB24 Side-mount Toolbox 24” (12ft Only) $206.25


Page 81 of 131 Printed 02/27/2017


(763) 434-2277 78" Medium Duty Dump (D2)

D 2 A 1 0 5 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

D2A1052BSSK 10' x 78" Medium Duty Dump $5,715.00

D2A1252BSSK 12' x 78" Medium Duty Dump $5,883.00

Standard Features• 9,900 lb. G.V.W.R.• 5,200 lb. x 2 G.A.W.R.• 2 5/16" A Frame Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (7,000 lb.)• 2 - Dexter E- Z lube Brake Axle (5,200 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 15" White Spoke Wheels• 4 - 225/75R15 Radial Tires ( lb.)• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Treadplate Steel Fenders• Lockable Toolbox (Houses Battery and Pump)• Barn Door Gate• 40° Dump Pitch

• 12VDC Hydraulic Pump• 5" x 30" West Craft Hyd. Cylinder• 12' Control Cable• Mounting Brackets for Roll-up Tarp• 5" Channel Main Frame & Tongue• 16" On Center 3" Channel Crossmembers• 10ga. Steel Bed• 78" Wide Bed• 18" 12ga Steel Sides• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• 5 year Dexter Axle Warranty

3,500 lb Axles Available on 10'.*** MAX GVWR 10,400 with 5200 lb Axles and 10,400 lb + Rated Coupler. ***


Coupler Options:A* BP 2 5/16" A-Frame (12,500lb.) Incl. D BP 2 5/16" Adjustable (14,000 lb.) $123.00 N BP 2 5/16" Atwood Style A-Frame Coupler $33.00 P 3" Pintle Eye - Channel-mount (21,000 lb.) $123.00




$338.00


$355.00


Page 82 of 131 Printed 02/27/2017

78" Medium Duty Dump (D2) Options

Axle Options:32BS (2) 3,500# (Dexter) Electric / Spring ($280.00) 52BS * (2) 5,200# (Dexter) Electric / Spring Included




Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 1 Upgrade to 235/80 R16 on 52k Axles $122.50 4 24" Dump Sides $272.50 5 Solar Battery Charger $130.00 C 12"oc Crossmembers $130.00 E Power Up/Down & Gravity Down Upgrade $166.25 M Mount Only for Spare Tire $33.75 P Tarp kit (Pull Bar) 6.5 x 18ft $275.00 R Ramps w 4 D-Rings $183.75 T Spare Tire and Mount (Bumper Pull) $200.00 -DR01 1 Pair D-Rings $40.00


Page 83 of 131 Printed 02/27/2017


(763) 434-2277 83" Tandem Axle Dump (D7)

D 7 A 1 0 7 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other




Standard Features• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (7,000 lb.)• 2 - Dexter E- Z lube Brake Axle (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• 1/8" Treadplate Steel Fenders• Lockable Toolbox (Houses Battery and Pump)• 2 - Way Gate (Barn Doors & Spread Gate)• 6' 6" Slide In Channel Ramps• 4 - D-Rings (Welded inside the Box)• 40° Dump Pitch• 12VDC Hydraulic Pump• 5" x 17" West Craft Hyd. Cylinder w/Scissor Lift

• Scissor Lift• 12' Control Cable• Mounting Brackets for Roll-up Tarp• 6" Channel Main Frame & Tongue• 2" x 6" x 11ga. Tubing Bed Frame• 3" Channel Crossmembers 16" on Center• 10ga. Steel Bed• 83" Wide Bed• 10ga. Steel Sides• 24" High Sides• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Stake Pockets• Sand Blasted, Acid Washed, Powder Coated• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• GN Option Equipped with 2 Jacks• GN Equipped w/Lockable Front Toolbox• 5 year Dexter Axle Warranty

10' has 5.12 cubic yards capacity, 12' has 6.14 cubic yards capacity, 14' has 7.17 cubic yards capacity.*** MAX GVWR 16,000 with 8k Axle Option and 16k+ Rated Coupler. ***


Coupler Options:A* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $88.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,378.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) $1,245.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) $1,025.00 S GN 2 5/16" Square (25,000 lb.) $1,025.00 T HD 2 5/16" Adj.3 Bolt Coupler w/6 hole Chn Bracket $54.00




$338.00


$355.00


Page 84 of 131 Printed 02/27/2017

83" Tandem Axle Dump (D7) Options

Axle Options:52BS (2) 5,200# (Dexter) Electric / Spring ($100.00)

52GS (2) 5,200# (Dexter)Elec/Hyd Drum (1,000 PSI Pump) / Spring² $665.00







Tail Options:S* Split / Spreader Gate Incl.

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 3 Upgrade to Single 10k Jack (Bumper Pull) $132.50 5 Solar Battery Charger $130.00 6 6" Taller GN Riser $153.75 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $130.00 E Power Up/Down & Gravity Down Upgrade $166.25 H HD 24" Side Extensions 10ga $1,092.50 M Mount Only for Spare Tire $33.75 P Tarp kit(Pull Bar)7x20ft $275.00 T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $643.75 V 24" Side Extensions (Expanded Metal) $635.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Y 24" Side Extensions (Solid) $566.25 Z Grain Chute $306.25 -BTRY 1 Extra Battery $225.00 -DON1 Removable Deck on the Neck (102" Wide 96" Long) $966.25 -DR01 1 Pair D-Rings $40.00 -GAS1 Gas Powered Hydraulic Unit $1,526.25 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,668.75 -JA06 2 Hydraulic Monster Jacks™ Includes Front Toolbox $1,900.00 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $183.75 -JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks (GN Only) $102.50 -LT10 Light Bar w/4 Lights (GN Only) $332.50 -RS01 Rear Support Stands $86.25 -SG01 Dump Sidegate $656.25 -SLXX No Scissor Lift -$245.00 -SP02 Spare Tire & Mount (Bumper Pull) G Rated $267.50 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $432.50 -SW07 7 Gauge Solid Metal Sides & Floor $580.00 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $132.50 -TB03 Top Riser Toolbox $465.00 -TB24 Side-mount Toolbox 24” (12ft & 14ft Only) $206.25 -TB36 Side-mount Toolbox 36” (14ft Only) $231.25


Page 85 of 131 Printed 02/27/2017


(763) 434-2277 83" High Side Dump (DH)

D H A 1 0 7 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

DHA1072BSSK 10' x 83" High Side Dump $7,736.00



Standard Features• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• 2 5/16" Ball Adjustable Bulldog Coupler• Safety Chains• 1 - Top Wind Drop Leg Jack (8,000 lb.)• 2 - Dexter E-Z Lube Brake Axles (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb.)• Defender II Electric Breakaway Kit w/ Charger• 3M DOT Reflective Tape• 1/8" Treadplate Steel Fenders• Lockable Toolbox (Houses Battery and Pump)• 2 - Way Gate (Barn Doors & Spreader Gate)• 6' 6" Slide In Channel Ramps• 4 - D-Rings (Welded inside the Box)• 40° Dump Pitch• 12VDC KTI Hydraulic Pump• 5" x 17" West Craft Hyd. Cylinder w/Scissor Lift

• 12' Control Cable• Mounting Brackets for Roll-up Tarp• 6" Channel Main Frame & Tongue• 2" x 6" x 11ga. Tubing Bed Frame• 3" Channel Crossmembers 16" on Center• 10ga. HD Steel Bed• 83" Extra Wide Bed• 10ga. HD Steel Sides• 48" High Sides (36" Available)• Optronics Flushmount Lifetime LED Lights• Bargman Sealed Wire Harness w/ 7-Way RV Plug• Stake Pockets for Extensions• Sand Blasted, Acid Washed, Powder Coated• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• GN Option Equipped with 2 -10k Jacks• GN Option Equipped with Front Toolbox• 5 year Dexter Axle Warranty

10' has 10.25 cubic yards capacity, 12' has 12.30 cubic yards capacity, 14' has 14.33 cubic yards capacity.*** MAX GVWR 16,000 with 16k+ Rated Coupler. ***

Bumperpull Tongue Length (4' 2").

Coupler Options:A* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $85.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,378.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) $1,245.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) $1,025.00 S GN 2 5/16" Square (25,000 lb.) $1,025.00 T HD 2 5/16" Adjustable Channel Mount 3 Bolt Coupler $54.00




$338.00


$355.00


Page 86 of 131 Printed 02/27/2017

83" High Side Dump (DH) Options

Axle Options:72BS * (2) 7,000# (Dexter) Electric / Spring Included






Other Options:0 Cold Weather Wiring Harness (7-Way RV) $26.25 8 Full Size Divided Toolbox Upgrade (BP Only) $80.00 C 12"oc Crossmembers $126.25 D 1 Extra Pair of D-Rings $38.75 E Power Up/Down & Gravity Down Upgrade $161.25 H HD 24" Side Extensions 10ga $1,092.50 M Mount Only for Spare Tire $32.50 P Tarp kit(Pull Bar)7x20ft $266.25 T Spare Tire and Mount (Bumper Pull) $192.50 U Deck on the Neck (GN Only) $625.00 V 24" Side Extensions (Expanded Metal) $635.00 X Bulldog 2-speed Jacks (12,000 lb.) $185.00 Y 24" Side Extensions (Solid) $566.25 Z Grain Chute $297.50 -DR01 1 Pair D-Rings $40.00 -JA06 2 Hydraulic Monster Jacks™ Includes Front Toolbox $1,900.00 -RS01 Rear Support Stands $83.75 -SW03 3ft Tall Sides -$250.00


Page 87 of 131 Printed 02/27/2017


(763) 434-2277 83" XL Dump (D9)

D 9 A 1 6 7 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

D9A1672BSSK 16' x 83" XL Dump $7,901.00



16' has 8.19 cubic yards capacity.*** MAX GVWR 16,000 with 8k Axle Option and 16k+ Rated Coupler. ***

*** 6x21 Cylinder Required on Triple Axle (Option -CY06). ***Bumper Pull Tongue Length (4' 3"), Gooseneck Length (9' 2").





$338.00


$355.00


Page 88 of 131 Printed 02/27/2017

83" XL Dump (D9) Options




73JS (3) 7,000# (Dexter) Electric/Hyd Drum Oil Bath /Spring $3,135.00



92JS (2) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric/Hyd Drum Oil Bath / Spring $1,935.00



Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 3 Upgrade to Single 10k Jack (Bumper Pull) $132.50 5 Solar Battery Charger $130.00 6 6" Taller GN Riser $153.75 8 Full Size Divided Toolbox Upgrade (BP Only) $82.50 9 9,900 G.V.W.R. $0.00 C 12"oc Crossmembers $130.00 E Power Up/Down & Gravity Down Upgrade $166.25 H HD 24" Side Extensions 10ga $1,092.50 M Mount Only for Spare Tire $33.75 P Tarp kit (Pull Bar) 7 x 20ft $275.00 T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $643.75 V 24" Side Extensions (Expanded Metal) $838.75 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Y 24" Side Extensions (Solid) $718.75 Z Grain Chute $306.25 -BTRY 1 Extra Battery $225.00 -CY06 6" Cylinder Upgrade $257.50 -DON1 Removable Deck on the Neck (102" Wide 96" Long) $966.25 -DR01 1 Pair D-Rings $40.00 -FR01 Fork Rack $265.00 -GAS1 Gas Powered Hydraulic Unit $1,526.25 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,668.75 -JA06 2 Hydraulic Monster Jacks™ Includes Front

Toolbox$1,900.00

-LT10 Light Bar w/4 Lights (GN Only) $332.50 -RS01 Rear Support Stands $86.25 -SG01 Dump Sidegate $656.25 -SP02 Spare Tire & Mount (Bumper Pull) G Rated $267.50 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $432.50 -SW07 7 Gauge Solid Metal Sides & Floor $580.00 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $132.50 -TB03 Top Riser Toolbox $465.00 -TB24 Side-mount Toolbox 24” $206.25 -TB36 Side-mount Toolbox 36” $231.25


Page 89 of 131 Printed 02/27/2017


(763) 434-2277 83" XL High Side Dump (DC)

D C A 1 6 7 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

DCA1672BSSK 16' x 83" XL High Side Dump $8,744.00



*** MAX GVWR 16,000 ****** 6x21 Cylinder Required on Triple Axle (Option -CY06). ***Bumper Pull Tongue Length (4' 3"), Gooseneck Length (9' 2").





$338.00


$355.00


Page 90 of 131 Printed 02/27/2017

83" XL High Side Dump (DC) Options






92JS (2) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric/Hyd Drum Oil Bath / Spring $1,935.00


Tail Options:S* Split / Spreader Gate Incl. G Landscape Gate (No Ramps, No Ramp Pockets) $259.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 3 Upgrade to Single 10k Jack (Bumper Pull) $132.50 5 Solar Battery Charger $130.00 6 6" Taller GN Riser $153.75 8 Full Size Divided Toolbox Upgrade (BP Only) $82.50 9 9,900 G.V.W.R. $0.00 C 12"oc Crossmembers $130.00 E Power Up/Down & Gravity Down Upgrade $166.25 H HD 24" Side Extensions 10ga $1,092.50 M Mount Only for Spare Tire $33.75 P Tarp kit (Pull Bar) $275.00 T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $643.75 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Y 24" Side Extensions (Solid) $566.25 Z Grain Chute $306.25 -BTRY 1 Extra Battery $225.00 -CY06 6" Cylinder Upgrade $257.50 -DR01 1 Pair D-Rings $40.00 -FR01 Fork Rack $265.00 -GAS1 Gas Powered Hydraulic Unit $1,526.25 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,668.75 -JA06 2 Hydraulic Monster Jacks™ Includes Front Toolbox $1,900.00 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $183.75 -JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks (GN Only) $102.50 -RS01 Rear Support Stands $86.25 -RS12 12" Taller GN Riser $306.25 -SW03 3ft Tall Sides -$250.00 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $132.50 -TB03 Top Riser Toolbox $465.00 -TB24 Side-mount Toolbox 24” $206.25 -TB36 Side-mount Toolbox 36” $231.25


Page 91 of 131 Printed 02/27/2017


(763) 434-2277 83" Low Pro Dump (DL)

D L A 1 2 7 2 B D S K1 2 3 4 5 6 7 8 9 10 11 Other

DLA1272BDSK 12' x 83" Low Pro Dump $7,641.00

DLA1472BDSK 14' x 83" Low Pro Dump $7,829.00

Standard Features• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (7,000 lb.)• 2 - Dexter E- Z lube Brake Drop Axle (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• 1/8" Treadplate Steel Fenders• Lockable Toolbox (Houses Battery and Pump)• 2 - Way Gate (Barn Doors & Spread Gate)• 6' 6" Slide In Channel Ramps• 4 - D-Rings (Welded inside the Box)• 40° Dump Pitch• 12VDC Hydraulic Pump• 5" x 17" West Craft Hyd. Cylinder w/Scissor Lift

• Scissor Lift• 12' Control Cable• Mounting Brackets for Roll-up Tarp• 8" x 10 lb. I-Beam Frame & Tongue• 3" Channel Crossmembers 16" on Center• 10ga. Steel Bed• 83" Wide Bed• 10ga. Steel Sides• 24" High Sides• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Stake Pockets• Sand Blasted, Acid Washed, Powder Coated• Interstate (TM) Deep Cycle Battery• Ultra Low 24" Deck Height• 110V Integrated Trickle Charger• GN Option Equipped with 2 Jacks• GN Equipped w/Lockable Front Toolbox• 5 year Dexter Axle Warranty

*** MAX GVWR 16,000 with 8k Axle Option and 16k+ Rated Coupler. ***Bumper Pull Tongue Length (4' 10"), Gooseneck Length (9' 2").





$338.00


$355.00


Page 92 of 131 Printed 02/27/2017

83" Low Pro Dump (DL) Options

Axle Options:72BD * (2) 7,000# (Dexter) Electric / Drop Axle Included 72BS (2) 7,000# (Dexter) Electric / Spring ($180.00) 72BT (2) 7,000# (Dexter) Electric / Torsion² $286.00

72GD (2) 7,000# (Dexter)Elec/Hyd Drum (1,000 PSI Pump) / Drop Axle $1,393.00


72SD (2) 7,000# (Dexter)Surge Hydraulic Drum [Surge Coupler] / Drop Axle² $1,040.00

Y2BS (2) 7,000# w/215/75R17.5 LR-H Singles (Dexter)Electric / Spring $988.00

Y2HS (2) 7,000# w/215/75R17.5 LR-H Singles (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring $2,500.00




92GD (2) 7,000# w/235/85R16 LR-G Tires (Dexter)Elec/Hyd Drum (1,000 PSI Pump) / Drop Axle $1,895.00



$2,308.00


$3,778.00


82HS (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring $3,033.00


Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 3 Upgrade to Single 10k Jack (Bumper Pull) $132.50 5 Solar Battery Charger $130.00 6 6" Taller GN Riser $153.75 8 Full Size Divided Toolbox Upgrade (BP Only) $82.50 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $130.00 E Power Up/Down & Gravity Down Upgrade $166.25 H HD 24" Side Extensions 10ga $1,092.50 M Mount Only for Spare Tire $33.75 P Tarp kit(Pull Bar)7x20ft $275.00 T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $643.75 V 24" Side Extensions (Expanded Metal) $635.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Y 24" Side Extensions (Solid) $566.25 Z Grain Chute $306.25 -BTRY 1 Extra Battery $225.00 -DON1 Removable Deck on the Neck (102" Wide 96"

Long)$966.25

-DR01 1 Pair D-Rings $40.00 -FR01 Fork Rack $265.00 -GAS1 Gas Powered Hydraulic Unit $1,526.25 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,668.75 -LT10 Light Bar w/4 Lights (GN Only) $332.50 -RS01 Rear Support Stands $86.25 -SP02 Spare Tire & Mount (Bumper Pull) G Rated $267.50 -SP08 215/75/R17.5 (H) 8k Axle Spare Tire and Mount $311.25 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $432.50 -SW07 7 Gauge Solid Metal Sides & Floor $580.00 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $132.50 -TB03 Top Riser Toolbox $465.00 -TB24 Side-mount Toolbox 24” (12ft & 14ft Only) $206.25 -TB36 Side-mount Toolbox 36” (14ft Only) $231.25


Page 93 of 131 Printed 02/27/2017


(763) 434-2277 83" Low Pro High Side Dump (DM)

D M A 1 2 7 2 B D S K1 2 3 4 5 6 7 8 9 10 11 Other

DMA1272BDSK 12' x 83" Low Pro High Side Dump $8,333.00

DMA1472BDSK 14' x 83" Low Pro High Side Dump $8,521.00



*** MAX GVWR 16,000 with 8k Axle Option and 16k+ Rated Coupler. ***Bumper Pull Tongue Length (4' 10"), Gooseneck Length (9' 2").





$338.00


$355.00


Page 94 of 131 Printed 02/27/2017

83" Low Pro High Side Dump (DM) Options

Axle Options:52SS (2) 5,200# (Dexter)

Surge Hydraulic Drum [Surge Coupler] / Spring² $593.00

72BD * (2) 7,000# (Dexter) Electric / Drop Axle Included 72BS (2) 7,000# (Dexter) Electric / Spring ($180.00) 72BT (2) 7,000# (Dexter) Electric / Torsion² $286.00

72FD (2) 7,000# (Dexter)Electric Brake with OIL Bath Hub / Drop Axle $265.00



72SD (2) 7,000# (Dexter)Surge Hydraulic Drum [Surge Coupler] / Drop Axle² $1,040.00

72ST (2) 7,000# (Dexter)Surge Hydraulic Drum [Surge Coupler] / Torsion $1,145.00

Y2BS (2) 7,000# w/215/75R17.5 LR-H Singles (Dexter)Electric / Spring $988.00

Y2HS (2) 7,000# w/215/75R17.5 LR-H Singles (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring $2,500.00







$2,308.00


$3,778.00


82HS (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring $3,033.00

Tail Options:S* Split / Spreader Gate Incl. G Landscape Gate (No Ramps, No Ramp Pockets) $259.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 3 Upgrade to Single 10k Jack (Bumper Pull) $132.50 5 Solar Battery Charger $130.00 6 6" Taller GN Riser $153.75 8 Full Size Divided Toolbox Upgrade (BP Only) $82.50 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $130.00 E Power Up/Down & Gravity Down Upgrade $166.25 H HD 24" Side Extensions 10ga $1,092.50 M Mount Only for Spare Tire $33.75 P Tarp kit(Pull Bar) $275.00 T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $643.75 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Y 24" Side Extensions (Solid) $566.25 Z Grain Chute $306.25 -BTRY 1 Extra Battery $225.00 -DR01 1 Pair D-Rings $40.00 -FR01 Fork Rack $265.00 -GAS1 Gas Powered Hydraulic Unit $1,526.25 -GN06 6" Longer Neck $153.75 -JA01 HD 25k Jost 2x Jacks $571.25 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,668.75 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $183.75 -JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks (GN

Only)$102.50

-RS01 Rear Support Stands $86.25 -SW03 3ft Tall Sides -$250.00 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $132.50 -TB03 Top Riser Toolbox $465.00 -TB24 Side-mount Toolbox 24” (12ft & 14ft Only) $206.25 -TB36 Side-mount Toolbox 36” (14ft Only) $231.25


Page 95 of 131 Printed 02/27/2017


(763) 434-2277 83" Low Pro XL Dump (DJ)

D J A 1 6 7 2 B D S K1 2 3 4 5 6 7 8 9 10 11 Other

DJA1672BDSK 16' x 83" Low Pro XL Dump $8,330.00



16' has 8.19 cubic yards capacity.*** MAX GVWR 16,000 with 8k Axle option and 16k+ Rated Coupler. ***

*** 6x21 Cylinder Required on Triple Axle (Option -CY06). *** Bumper Pull Tongue Length (5'), Gooseneck Length (9' 2").

Coupler Options:A* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $88.00 C Rigid Mount Pintle Eye- Face-mount (25,000 lb.) $88.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,378.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,245.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) $1,245.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) $1,025.00 S GN 2 5/16" Square (25,000 lb.) $1,025.00 T HD 2 5/16" Adj.3 Bolt Coupler w/6 hole Chn Bracket $54.00




$338.00


$355.00


Page 96 of 131 Printed 02/27/2017

83" Low Pro XL Dump (DJ) Options

Axle Options:72BD * (2) 7,000# (Dexter) Electric / Drop Axle Included


73BD (3) 7,000# (Dexter) Electric / Drop Axle $1,076.00 73BS (3) 7,000# (Dexter) Electric / Spring $806.00




93BD (3) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric / Drop Axle $1,740.00



Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 3 Upgrade to Single 10k Jack (Bumper Pull) $132.50 5 Solar Battery Charger $130.00 6 6" Taller GN Riser $153.75 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $130.00 E Power Up/Down & Gravity Down Upgrade $166.25 H HD 24" Side Extensions 10ga $1,092.50 M Mount Only for Spare Tire $33.75 P Tarp kit (Pull Bar) 7 x 20ft $275.00 T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $643.75 V 24" Side Extensions (Expanded Metal) $838.75 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Y 24" Side Extensions (Solid) $718.75 Z Grain Chute $306.25 -BTRY 1 Extra Battery $225.00 -CY06 6" Cylinder Upgrade $257.50 -DON1 Removable Deck on the Neck (102" Wide 96" Long) $966.25 -DR01 1 Pair D-Rings $40.00 -FR01 Fork Rack $265.00 -GAS1 Gas Powered Hydraulic Unit $1,526.25 -JA01 HD 25k Jost 2x Jacks $571.25 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,668.75 -JA06 2 Hydraulic Monster Jacks™ Includes Front Toolbox $1,900.00 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $183.75 -JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks (GN

Only)$102.50

-LT05 Add LED Reverse Lights $145.00 -LT10 Light Bar w/4 Lights (GN Only) $332.50 -RS01 Rear Support Stands $86.25 -SP02 Spare Tire & Mount (Bumper Pull) G Rated $267.50 -SP05 Under Frame Spare Tire Mount $160.00 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $432.50 -SW07 7 Gauge Solid Metal Sides & Floor $580.00 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $132.50 -TB03 Top Riser Toolbox $465.00 -TB24 Side-mount Toolbox 24” $206.25 -TB36 Side-mount Toolbox 36” $231.25

Page 97 of 131 Printed 02/27/2017


(763) 434-2277 83" Low Pro XL High Side Dump (DK)

D K A 1 6 7 2 B D S K1 2 3 4 5 6 7 8 9 10 11 Other

DKA1672BDSK 16' x 83" Low Pro XL High Side Dump $9,173.00



*** MAX GVWR 16,000 with 8k Axle option and 16k+ Rated Coupler. ****** 6x21 Cylinder Required on Triple Axle (Option -CY06). *** Bumper Pull Tongue Length (5'), Gooseneck Length (9' 2").

Coupler Options:A* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $88.00 C Rigid Mount Pintle Eye (25,000 lb.) $88.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,378.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,245.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) $1,245.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) $1,025.00 S GN 2 5/16" Square (25,000 lb.) $1,025.00 T HD 2 5/16" Adj.3 Bolt Coupler w/6 hole Chn Bracket $54.00




$338.00


$355.00


Page 98 of 131 Printed 02/27/2017

83" Low Pro XL High Side Dump (DK) Options

Axle Options:72BD * (2) 7,000# (Dexter) Electric / Drop Axle Included 72BS (2) 7,000# (Dexter) Electric / Spring ($180.00) 72BT (2) 7,000# (Dexter) Electric / Torsion² $105.00


73BD (3) 7,000# (Dexter) Electric / Drop Axle $1,076.00 73BS (3) 7,000# (Dexter) Electric / Spring $806.00





93BD (3) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric / Drop Axle $1,740.00




Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 3 Upgrade to Single 10k Jack (Bumper Pull) $128.75 4 Plate for Winch $145.00 5 Solar Battery Charger $130.00 6 6" Taller GN Riser $153.75 8 Full Size Divided Toolbox Upgrade (BP Only) $82.50 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $130.00 E Power Up/Down & Gravity Down Upgrade $166.25 H HD 24" Side Extensions 10ga $1,092.50 M Mount Only for Spare Tire $33.75 P Tarp kit (Pull Bar) 7 x 20ft $275.00 T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $643.75 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Y 24" Side Extensions (Solid) $566.25 Z Grain Chute $306.25 -BTRY 1 Extra Battery $225.00 -CY06 6" Cylinder Upgrade $257.50 -DR01 1 Pair D-Rings $40.00 -FR01 Fork Rack $265.00 -GAS1 Gas Powered Hydraulic Unit $1,526.25 -GN06 6" Longer Neck $153.75 -JA01 HD 25k Jost 2x Jacks $571.25 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,668.75 -JA06 2 Hydraulic Monster Jacks™ Includes Front Toolbox $1,900.00 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $183.75 -JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks (GN

Only)$102.50

-LT05 Add LED Reverse Lights $145.00 -SW03 3ft Tall Sides -$250.00 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $132.50 -TB03 Top Riser Toolbox $465.00 -TB24 Side-mount Toolbox 24” $206.25 -TB36 Side-mount Toolbox 36” $231.25


Page 99 of 131 Printed 02/27/2017


(763) 434-2277 84" Deckover Dump (DN)

D N A 1 2 5 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

DNA1252BSSK 12' x 84" Deckover Dump $6,961.00

DNA1452BSSK 14' x 84" Deckover Dump $7,148.00

Standard Features• 9,990 lb. G.A.W.R.• 5,200 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (7,000 lb.)• 2 - Dexter E- Z lube Brake Axle (5,200 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Lockable Toolbox (Houses Battery and Pump)• 2 - Way Gate (Barn Doors & Spread Gate)• 80" Slide In Channel Ramps• 4 - D-Rings (Welded inside the Box)• 40° Dump Pitch• 12VDC Hydraulic Pump• Scissor Lift• 6" Channel Tongue

• 12' Control Cable• Mounting Brackets for Roll-up Tarp• 8" Channel Main Frame & 6" Channel Tongue• 2" x 5" x 11ga. Tubing Bed Frame• 3" Channel Crossmembers 16• 10ga. Steel Bed• 84" Wide Bed• 12ga. Steel Sides• 18" High Fold Down Sides• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• GN Option Equipped with 2 Jacks• GN Equipped w/Lockable Front Toolbox• 5" x 17" West Craft Hyd. Cylinder w/Scissor Lift• 5 year Dexter Axle Warranty

Scissor IncludedBumper Pull Tongue Length (4' 2").

Coupler Options:A* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $88.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) $1,245.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) $1,025.00 S GN 2 5/16" Square (25,000 lb.) $1,025.00




$338.00


$355.00


Page 100 of 131 Printed 02/27/2017

84" Deckover Dump (DN) Options







Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 3 Upgrade to Single 10k Jack (Bumper Pull) $132.50 5 Solar Battery Charger $130.00 6 6" Taller GN Riser $153.75 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $130.00 E Power Up/Down & Gravity Down Upgrade $166.25 P Tarp kit (Pull Bar) 7 x 20ft $275.00 T Spare Tire and Mount (Bumper Pull) (Under Frame) $213.75 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Z Grain Chute $306.25 -DR01 1 Pair D-Rings $40.00 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,668.75 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $132.50


Page 101 of 131Printed 02/27/2017


(763) 434-2277 96" Deckover Dump (D8)

D 8 A 1 4 7 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

D8A1472BSSK 14' x 96" Deckover Dump $7,671.00

Standard Features• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (7,000 lb.)• 2 - Dexter E- Z lube Brake Axle (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Lockable Toolbox (Houses Battery and Pump)• 2 - Way Gate (Barn Doors & Spread Gate)• 80" Slide In Channel Ramps• 4 - D-Rings• 40° Dump Pitch• 12VDC Hydraulic Pump• 5" x 17" West Craft Hyd. Cylinder w/Scissor Lift• 12' Control Cable

• 6" Channel Tongue• Mounting Brackets for Roll-up Tarp• 8" I-Beam Main Frame• 11ga. Fabricated Bed Frame• 3" Channel Crossmembers 16" on Center• 2" x 6" x 11ga. Tubing Outer Bed Frame• 10ga. Steel Bed• 96" Wide Bed• 12ga. Steel Sides• 19" High Fold Down Sides• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• GN Option Equipped with 2 Jacks• GN Equipped w/Lockable Front Toolbox• Under Frame Spare Mount on Bumperpulls w/Spare Opt• 5 year Dexter Axle Warranty

14' has 6.22 cubic yards capacity.*** MAX GVWR 16,000 with 8k Axle Option and 16k+ Rated Coupler. ***


Coupler Options:A* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $88.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,245.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) $1,245.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) $1,025.00 S GN 2 5/16" Square (25,000 lb.) $1,025.00




$338.00


$355.00


Page 102 of 131 Printed 02/27/2017

96" Deckover Dump (D8) Options





$2,488.00




Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 3 Upgrade to Single 10k Jack (Bumper Pull) $132.50 5 Solar Battery Charger $130.00 6 6" Taller GN Riser $153.75 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $130.00 E Power Up/Down & Gravity Down Upgrade $166.25 M Mount Only for Spare Tire (Under Frame) $33.75 P Tarp kit (Pull Bar) 8 x 18ft $275.00 T Spare Tire and Mount (Bumper Pull) (Under

Frame)$213.75

U Deck on the Neck (102" Wide 96" Long) $643.75 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 -DR01 1 Pair D-Rings $40.00 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,668.75 -LT10 Light Bar w/4 Lights (GN Only) $332.50 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $132.50 -TB03 Top Riser Toolbox $465.00


Page 103 of 131 Printed 02/27/2017


(763) 434-2277 10" I-Beam Deckover Dump (DT)

D T A 1 4 7 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

DTA1472BSSK 14' x 10" I-Beam Deckover Dump $7,993.00

DTA1672BSSK 16' x 10" I-Beam Deckover Dump $8,249.00

Standard Features• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (7,000 lb.)• 2 - Dexter E- Z lube Brake Axle (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Lockable Toolbox (Houses Battery and Pump)• 2 - Way Gate (Barn Doors & Spread Gate)• 80" Slide In Channel Ramps• 4 - D-Rings• 40° Dump Pitch• 12VDC Hydraulic Pump• 5" x 21" West Craft Hyd. Cylinder w/Scissor Lift• 12' Control Cable

• 10" I-Beam Tongue• Mounting Brackets for Roll-up Tarp• 10" I-Beam Main Frame• 10ga. Fabricated Bed Frame• 3" Channel Crossmembers 16" on Center• 2" x 6" x 11ga. Tubing Outer Bed Frame• 10ga. Steel Bed• 96" Wide Bed• 10ga. Steel Sides• 19" High Fold Down Sides• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• GN Option Equipped with 2 Jacks• GN Equipped w/Lockable Front Toolbox• 5 year Dexter Axle Warranty

Coupler Options:A* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $88.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,245.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) $1,245.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) $1,025.00 S GN 2 5/16" Square (25,000 lb.) $1,025.00 T HD 2 5/16" Adj.3 Bolt Coupler w/6 hole Chn Bracket $54.00




$338.00


$355.00


Page 104 of 131 Printed 02/27/2017

10" I-Beam Deckover Dump (DT) Options



73HA (3) 7,000# (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Air Ride² $10,144.00



92FT (2) 7,000# w/235/85R16 LR-G Tires (Dexter)Electric Brake with OIL Bath Hub / Torsion $993.00


B2HS (2) 8,000# Oil Bath Axles, 235/80 Tires (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring $2,828.00


$2,488.00




Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 3 Upgrade to Single 10k Jack (Bumper Pull) $132.50 5 Solar Battery Charger $130.00 6 6" Taller GN Riser $153.75 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $130.00 E Power Up/Down & Gravity Down Upgrade $166.25 M Mount Only for Spare Tire (Under Frame) $33.75 P Tarp kit (Pull Bar) 8 x 18ft $275.00 T Spare Tire and Mount (Bumper Pull) (Under

Frame)$213.75

U Deck on the Neck (102" Wide 96" Long) $643.75 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 -DR01 1 Pair D-Rings $40.00 -LT10 Light Bar w/4 Lights (GN Only) $332.50 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $132.50 -TB03 Top Riser Toolbox $465.00


Page 105 of 131 Printed 02/27/2017


(763) 434-2277 91" Deckover Dump (DS)

D S R 1 6 7 2 B S B K1 2 3 4 5 6 7 8 9 10 11 Other

DSR1672BSBK 16' x 91" Deckover Dump $10,556.00

Standard Features• 15,680 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• GN 2 5/16" Ball Bulldog Coupler 25,000 lb• Safety Chains• 2 - Drop Leg Jacks (10,000 lb.)• 2 - Dexter E- Z lube Brake Axle (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Lockable Front Toolbox w/ Chain Holder• Barn Door Gate• 6' 6" Ramps w/ Holders• 40° Dump Pitch

• 12VDC Hydraulic Pump• 5" x 21" Hydraulic Cylinder w/Scissor Lift• 10" x 12 lb. I-Beam Main Frame, Riser & Neck• 3" Channel Crossmembers 16" on Center• 10ga. Steel Bed• 91" Wide Bed• 12ga. Steel Sides• 36" High Removable Sides• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• 5" x 21" West Craft Hyd. Cylinder w/Scissor Lift• 5 year Dexter Axle Warranty

16' has 13.48 cubic yards capacity.*** MAX GVWR 24,000 with Triple 8k Axle option. ***

*** 6x21 Cylinder Required on Triple Axle (Option -CY06). ***Gooseneck Length (9' 4").

Coupler Options:R* GN 2 5/16" Round (25,000 lb.) Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) w/Tbx $0.00 H GN 2 5/16" Round (30,000 lb.) $220.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $220.00 P 3" Pintle Eye - Face-mount (36,000 lb.) w/Tbx $0.00 Q GN 2 5/16" Square (30,000 lb.) $220.00 S GN 2 5/16" Square (25,000 lb.) $0.00




$338.00


$355.00


Page 106 of 131 Printed 02/27/2017

91" Deckover Dump (DS) Options







$2,488.00



Tail Options:B* Barn Door Gate Incl. S Split / Spreader Gate $478.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 5 Solar Battery Charger $130.00 6 6" Taller GN Riser $153.75 C 12"oc Crossmembers $191.25 E Power Up/Down & Gravity Down Upgrade $166.25 P Tarp Kit 93" (Uninstalled) $853.75 U Deck on the Neck (102" Wide 96" Long) $643.75 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Z Grain Chute $306.25 -DR01 1 Pair D-Rings $40.00 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -LT10 Light Bar w/4 Lights (GN Only) $332.50 -S201 1 Side-mount Toolbox 45"x17½" $382.50


Page 107 of 131 Printed 02/27/2017


(763) 434-2277 Tandem Dual Dump (DD)

D D R 1 6 A 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

DDR16A2BSSK 16' Tandem Dual Dump $14,809.00



Standard Features• 25,000 lb. G.V.W.R.• 10,000 lb. x 2 G.A.W.R.• GN 2 5/16" Ball Bulldog Coupler 25,000 lb• Safety Chains• 2 - Drop Leg Jacks (10,000 lb.)• 2 - Dexter Oil Bath Brake Axles (10,000 lb.)• 5 Leaf Slipper Spring Suspension• 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern• 8 - 16" 235/80R16 Radial Tires (3,090 lb)• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• Ladder on Right Side• Lockable Front Toolbox w/ Chain Holder• 2 - Way Gate (Barn Doors & Spread Gate)• 70" Ramps w/ Holders• 4 Flushmount D-Rings

• 45° Dump Pitch• 12VDC Hydraulic Pump• 10 Ton Scissor Lift• 12" x 19 lb. I-Beam Main Frame, Riser & Neck• 2 x 6 x 1/8" Square Tubing Outer Deck Frame• 3" Channel Crossmembers 16• 10ga. Steel Bed• 96" Wide Bed• 12ga. Steel Sides• 36" High Removable Sides• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• Dual 5" x 25½" West Craft Hyd. Cylinder w/Hoist• 5 year Dexter Axle Warranty

16' has 14.22 cubic yards capacity.18' has 16.00 cubic yards capacity.20' has 17.78 cubic yards capacity.

*** MAX GVWR 28,000 with 12k Axle Option and 28k+ Rated Coupler. ***Gooseneck Length (9' 1").

Coupler Options:R* GN 2 5/16" Round (25,000 lb.) Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) w/Tbx $0.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $353.00 H GN 2 5/16" Round (30,000 lb.) $220.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $220.00 P 3" Pintle Eye - Face-mount (36,000 lb.) w/Tbx $0.00 Q GN 2 5/16" Square (30,000 lb.) $220.00 S GN 2 5/16" Square (25,000 lb.) $0.00




$338.00


$355.00


Page 108 of 131 Printed 02/27/2017

Tandem Dual Dump (DD) Options








T2HS (2) 10,000# w/235/85R16 LR-G Dual T&W(Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Spring $2,950.00






Tail Options:S* Split / Spreader Gate Incl. B Barn Doors $0.00

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $27.50 5 Solar Battery Charger $130.00 6 6" Taller GN Riser $153.75 9 Under Frame Tie Down Flat $3.13 / ft B 4ft Removable Sides $497.50 C 12"oc Crossmembers $191.25 E Power Up/Down & Gravity Down Upgrade $166.25 H 6ft Removable Sides $1,492.50 K 4" Ratchets every 4ft w/ Slide Track $27.81 / ft M 6" Axle Spread (Longer Equalizer) $191.25 N 22 lb. I-Beam Main Frame, Riser & Neck $18.44 / ft P Tarp Kit 100" (Uninstalled) $852.50 U Deck on the Neck (102" Wide 96" Long) $643.75 W Warn M12000 Winch w/Plate & Battery $2,670.00 X Bulldog 2-speed Jacks (12,000 lb.) $190.00 Z Grain Chute $306.25 -DR01 1 Pair D-Rings $40.00 -JA01 HD 25k Jost 2x Jacks $571.25 -JA06 2 Hydraulic Monster Jacks™ $1,900.00 -LT10 Light Bar w/4 Lights (GN Only) $332.50 -RT01 1 Pair Weld-On Strap Ratchets $61.25 -S201 1 Side-mount Toolbox 45"x17½" $382.50 -S401 1 Side-mount Toolbox 72"x17½" $630.00


Page 109 of 131 Printed 02/27/2017


(763) 434-2277 Rollster™ Roll Off Dump (DR)

D R A 1 4 7 2 B S S K1 2 3 4 5 6 7 8 9 10 11 Other

DRA1472BSSK 14' Rollster™ Roll Off Dump $8,268.00

Standard Features• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16" Ball Bulldog Coupler• Safety Chains• 1 - Spring Loaded Drop Leg Jack (10,000 lb)• 2 - Dexter E- Z lube Brake Axle (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16" White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Electric Breakaway Kit w/ Charger• DOT Reflective Tape• 1/8" Treadplate Steel Fenders• Lockable Toolbox (Houses Battery and Pump)• Barn Door Gates• 4 - D-Rings (Welded inside the Box)• 45° Dump Pitch• 12VDC Hydraulic Pump• 5" x 17" West Craft Hyd. Cylinder w/Scissor Lift• Scissor Lift

• 12' Control Cable• BED Mounted 84" X 20' Heavy-Duty UV resistant Tarp• 6" Channel Main Frame & Tongue• 2" x 6" x 11ga. Tubing Bed Frame• 3" Channel Crossmembers 16" on Center• 10ga. Steel Bed• 83" Wide Bed• 10ga. Steel Sides• 48" High Sides• DOT Approved Flushmount Lifetime LED Lights• Sealed Bargman Wire Harness w/ 7-Way RV Plug• Sand Blasted, Acid Washed, Powder Coated• 2 - Power Volt Group 27 Batteries• 110V Integrated Trickle Charger• GN Option Equipped with 2 Jacks• GN Equipped w/Lockable Front Toolbox• 5 year Dexter Axle Warranty• 18.5 Talon Super Winch

*** Base Pricing does not include attachments or bins. ****** Includes base trailer with dump function. ***

*** Bin capacity 13.26 cubic yards. ***



Powder Coat Color Options:Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00Primer + Black (Texas) (0) $138.00Equipment Yellow (y) Grey (g) Red (r) White (w)

$206.00

Primer + Red (Texas) (1) $296.00Desert Tan (t) Primer + Desert Tan (Texas) (8) Primer + Tractor Green (Texas) (2) Primer + White (Texas) (3) Tractor Green (j)

$338.00

Primer + Equipment Yellow (Texas) (4) Primer + Tractor Orange (Texas) (5) Tractor Orange (n)

$355.00


Page 110 of 131 Printed 02/27/2017

Rollster™ Roll Off Dump (DR) Options


Y2BS (2) 7,000# w/215/75R17.5 LR-H Singles (Dexter)Electric / Spring $1,225.00



$2,545.00


Tail Options:S* Straight Deck Incl.

Other Options:0 Cold Weather Wiring Harness (7-Way RV) $22.50 X Bulldog 2-speed Jacks (12,000 lb.) $331.25 -CWB1 Upgrade to Black Spoke Wheels $65.00 -KD01 1 - Roll Off Dump w/Barn Door $3,721.25 -KD02 2 - 1 - Roll Off Dump w/Barn Door $7,441.25 -KD03 3 - 1 - Roll Off Dump w/Barn Door $11,162.50 -KD04 4 - 1 - Roll Off Dump w/Barn Door $14,883.75 -KD05 5 - 1 - Roll Off Dump w/Barn Door $18,605.00


Page 111 of 131 Printed 02/27/2017


(763) 434-2277 60" All-Steel Utility (A6)

A 6 2 0 8 3 1 D S G K1 2 3 4 5 6 7 8 9 10 11 Other

A620831DSGK 8' x 60" All-Steel Utility $1,708.00

A621031DSGK 10' x 60" All-Steel Utility $1,778.00

Standard Features• 3,500 lb. G.V.W.R.• 3,500 lb. x 1 G.A.W.R.• 2" Ball Bulldog Coupler• Safety Chains• 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.)• 1 - Dexter E- Z lube Idler Axle (3,500 lb.)• 4 Leaf Double-eye Spring Suspension• 2 - NEW 15" White Spoke Wheels• 2-ST205/75R15 Radial Tires (1,820 lb)• 9" x 33" Treadplate Removable Alum Fenders

• 12ga Solid Steel Sides• 3" Channel Tongue• 4" Channel Tongue• 2 1/2" x 2 1/2" x 3/16" Angle Crossmembers• 1/8" Diamond Plate w/ 4 Flushmount D-Rings• 60" Wide Deck• 4ft Expanded Metal Gate• Flushmount 6” Oval Lifetime LED Tail Lights• Sand Blasted, Acid Washed, Powder Coated• 5 year Dexter Axle Warranty

*** MAX GVWR 3,500 with 3,500 lb Electric Axle. ***

Coupler Options:2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $33.00 J BP 2 5/16" Adjustable $118.00 P 3" Pintle Eye - Channel-mount $118.00



$63.00

Page 112 of 131 Printed 02/27/2017

60" All-Steel Utility (A6) Options

Axle Options:31DS * (1) 3,500# (Dexter) Idler / Spring Included 31ES (1) 3,500# (Dexter) Electric / Spring $174.00

Tail Options:G* Straight Deck w/ 4' Fold-up Gate Incl. F Straight Deck with Fold Down Gate $75.00 K Straight Deck w/ Bi-Fold Gate $85.00 S Straight Deck ($168.00)

Other Options:4 4ft Expanded Metal Sides $40.00 / ft 7 Upgrade to 7k Jack $88.75 B 4ft Solid Metal Sides $40.00 / ft J LED Light Upgrade Clearance/Marker $45.00 T Mount Only for Spare Tire $33.75 V Spare Tire and Mount $130.00 Z 22" Solid Metal Sides w/ 2" pipe-top $29.06 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -GT10 Ramp Gate Transition Lip $67.50

Page 113 of 131 Printed 02/27/2017


(763) 434-2277 60" Single Axle Channel Utility (U6)

U 6 2 0 8 3 1 D S S K1 2 3 4 5 6 7 8 9 10 11 Other

U620831DSSK 8' x 60" Single Axle Channel Utility $1,261.00







Standard Features• 2,990 lb. G.V.W.R.• 3,500 lb. x 1 G.A.W.R.• 2" Ball Bulldog Coupler• Safety Chains• 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.)• 1 - Dexter E- Z lube Idler Axle (3,500 lb.)• 4 Leaf Double-eye Spring Suspension• 2 - NEW 15" White Spoke Wheels• 2 - ST205/75R15 Radial Tires (1,820 lb)• Stake Pockets• 9" x 33" Treadplate Removable Alum Fenders

• 4" Channel Frame & Tongue• 2 1/2" x 2 1/2" x 3/16" Angle Crossmembers• 2" x 2" Removable Side Rail• 2" x 2" Top Rail• 2" Treated Pine Lumber Deck• 60" Wide Deck• Flushmount 6” Oval Lifetime LED Tail Lights• Sealed Wire Harness• Sand Blasted, Acid Washed, Powder Coated• 5 year Dexter Axle Warranty

16' and up must be tandem axle.*** Must have 3, 500 lb axles with Tilt Deck Tail Option. ***

*** 5,200 lb axles come with 16" on center cross members. ****** MAX GVWR 10,400 with 5,200 lb Axles and 10,400 lb + Rated Coupler. ***

*** Drop and Torsion Axle options will come with Steel Fender. ***Bumper Pull Tongue Length (3' 4").

Coupler Options:2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $33.00 J BP 2 5/16" Adjustable $106.00 M BP 2" Atwood Style A-Frame Coupler $0.00 N BP 2 5/16" Atwood Style A-Frame Coupler $33.00 P 3" Pintle Eye - Channel-mount $106.00



$63.00

Page 114 of 131 Printed 02/27/2017

60" Single Axle Channel Utility (U6) Options

Axle Options:31DD (1) 3,500# (Dexter) Idler / Drop Axle² $141.00 31DS * (1) 3,500# (Dexter) Idler / Spring Included 31ED (1) 3,500# (Dexter) Electric / Drop Axle² $315.00 31ES (1) 3,500# (Dexter) Electric / Spring $174.00


51DS (1) 5,200# (Dexter) Idler / Spring $254.00 51ED (1) 5,200# (Dexter) Electric / Drop Axle² $435.00 51ES (1) 5,200# (Dexter) Electric / Spring $429.00


Tail Options:S* Straight Deck Incl. 2 2' Dovetail w/ 5' Slide-in Ramps $245.00 4 4' Dovetail w/ 5' Slide-in Ramps $339.00 A 2' Dovetail w/ 2 Fold-up Ramps $291.00 B 2' Dovetail w/ 4' Fold-up Gate $220.00 C Straight Deck w/ 2 Fold-up Ramps $245.00 D 4' Dovetail w/ 2 Fold-up Ramps $385.00 F Straight Deck with Fold In Gate $241.00 G Straight Deck w/ 4' Fold-up Gate $173.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $289.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $336.00 K Straight Deck w/ Bi-Fold Gate $253.00 M 2' Dovetail w/ Bi-Fold Gate $300.00 N 4' Dovetail w/ Bi-Fold Gate $393.00 R Straight Deck w/ 5' Slide-in Ramps $198.00 T Tilt Deck (Single Axle - ATV Use Only) $48.00 X 2' Dovetail w/ Split Heavy Duty Gate $415.00

Other Options:2 2ft Expanded Metal Sides $29.06 / ft 3 Upgrade to 225/75 R15 on 3.5k Axles $88.75 4 4ft Expanded Metal Sides $40.00 / ft 5 Regular Sides w/Solid Metal $15.00 / ft 6 Regular Sides w/Expanded Metal $15.00 / ft 7 Upgrade to 7k Jack $88.75 8 2 Stake Pockets In Front of Trailer $12.50 A Side Mount ATV Ramps (12ft or Longer) $95.00 C Landscape Toolbox (must have 2ft or 4ft Sides) $272.50 F Steel Diamond Plate Fenders $0.00 G 4ft Side Gate (14ft or longer) $172.50 J LED Light Upgrade Clearance/Marker $45.00 M Expanded Metal Floor $15.31 / ft P 2" Pipetop Removable Siderails $98.75 Q Rubrail $5.00 / ft S 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 16"oc $29.06 / ft T Mount Only for Spare Tire $33.75 U Rear Trailer Support Jacks $106.25 V Spare Tire and Mount $130.00 W 12" oc Crossmembers $91.25 X 16"oc Crossmembers $40.00 Z 22" Solid Metal Sides w/ 2" pipe-top $29.06 / ft -BWFL Blackwood Classic Lumber Full Deck $26.25 / ft -BWOT Blackwood Classic Lumber Outer Deck $15.63 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -GT10 Ramp Gate Transition Lip $67.50 -TB01 Front Toolbox (with 7k Jack) $258.75 -TD01 1 Set of Cargo Tie Down (2) Loops $12.50 -TW05 Upgrade to 235/80 R16 on 5.2 Axles $122.50 -WR01 Trimmer Rack Kit $132.50


Page 115 of 131 Printed 02/27/2017


(763) 434-2277 60" Tandem Axle Channel Utility (UC)

U C 2 0 8 3 2 C S S K1 2 3 4 5 6 7 8 9 10 11 Other

UC21032CSSK 10' x 60" Tandem Axle Channel Utility $2,060.00






Standard Features• 7,000 lb. G.V.W.R.• 3,500. x 2 G.A.W.R.• 2" Ball Bulldog Coupler• Safety Chains• 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.)• 2 - Dexter E- Z lube Idler Axle (3,500 lb.)• 4 Leaf Double-eye Spring Suspension• 4 - NEW 15" White Spoke Wheels• 4 - ST205/75R15 Radial Tires (1,820 lb)• Stake Pockets• 9" x 33" Treadplate Removable Alum Fenders


*** Must have 3500lb axles with Tilt Deck Tail option. ****** Drop and Torsion Axles will come with Steel Fender. ***

*** 5,200 lb axles come with 16'. ***

Coupler Options:2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $33.00 D BP 2" Adjustable $106.00 J BP 2 5/16" Adjustable $106.00 M BP 2" Atwood Style A-Frame Coupler $0.00 N BP 2 5/16" Atwood Style A-Frame Coupler $33.00 P 3" Pintle Eye - Channel-mount $106.00



$63.00

Page 116 of 131 Printed 02/27/2017

60" Tandem Axle Channel Utility (UC) Options

Axle Options:32CS * (2) 3,500# (Dexter) One Electric / Spring Included 32DS (2) 3,500# (Dexter) Idler / Spring ($172.00) 32ES (2) 3,500# (Dexter) Electric / Spring $175.00


$788.00



Tail Options:S* Straight Deck Incl. 2 2' Dovetail w/ 5' Slide-in Ramps $245.00 4 4' Dovetail w/ 5' Slide-in Ramps $339.00 A 2' Dovetail w/ 2 Fold-up Ramps $291.00 B 2' Dovetail w/ 4' Fold-up Gate $220.00 C Straight Deck w/ 2 Fold-up Ramps $245.00 D 4' Dovetail w/ 2 Fold-up Ramps $385.00 F Straight Deck with Fold In Gate $241.00 G Straight Deck w/ 4' Fold-up Gate $173.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $289.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $336.00 K Straight Deck w/ Bi-Fold Gate $253.00 M 2' Dovetail w/ Bi-Fold Gate $300.00 N 4' Dovetail w/ Bi-Fold Gate $393.00 Q Straight Deck w/ Split Heavy Duty Gate $394.00 R Straight Deck w/ 5' Slide-in Ramps $198.00 T Tilt Deck (Single Axle - ATV Use Only) $48.00 U Straight Deck w/ Split Gate $253.00 X 2' Dovetail w/ Split Heavy Duty Gate $415.00 Y 2' Dovetail w/ 3' Fold-up Gate $220.00

Other Options:2 2ft Expanded Metal Sides $29.06 / ft 3 Upgrade to 225/75 R15 on 3.5k Axles $88.75 4 4ft Expanded Metal Sides $40.00 / ft 5 Regular Sides w/Solid Metal $15.00 / ft 6 Regular Sides w/Expanded Metal $15.00 / ft 7 Upgrade to 7k Jack $88.75 8 2 Stake Pockets In Front of Trailer $12.50 A Side Mount ATV Ramps (12ft or Longer) $95.00 C Landscape Toolbox (must have 2ft or 4ft Sides) $272.50 F Steel Diamond Plate Fenders $0.00 G 4ft Side Gate (14ft or longer) $172.50 J LED Light Upgrade Clearance/Marker $45.00 M Expanded Metal Floor $15.31 / ft P 2" Pipetop Removable Siderails $98.75 Q Rubrail $5.00 / ft S 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 16"oc $29.06 / ft T Mount Only for Spare Tire $33.75 U Rear Trailer Support Jacks $106.25 V Spare Tire and Mount $130.00 W 12" oc Crossmembers $91.25 X 16"oc Crossmembers $40.00 Z 22" Solid Metal Sides w/ 2" pipe-top $29.06 / -BWFL Blackwood Classic Lumber Full Deck $26.25 / ft -BWOT Blackwood Classic Lumber Outer Deck $15.63 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $38.75 -DR01 1 Pair D-Rings $40.00 -GT10 Ramp Gate Transition Lip $67.50 -TB01 Front Toolbox (with 7k Jack) $258.75 -TD01 1 Set of Cargo Tie Down (2) Loops $12.50 -TD05 5 Sets of Cargo Tie Down (10) Loops $67.50 -WR01 Trimmer Rack Kit $132.50


Page 117 of 131 Printed 02/27/2017



U 2 2 1 0 3 1 D S S K1 2 3 4 5 6 7 8 9 10 11 Other





Standard Features• 2,990 G.V.W.R.• 3,500 x 1 G.A.W.R.• 2" Ball Bulldog Coupler• Safety Chains• 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.)• 1 - Dexter E- Z lube Idler Axle (3,500 lb.)• 4 Leaf Double-eye Spring Suspension• 2 - NEW 15" White Spoke Wheels• 2 - ST205/75R15 Radial Tires (1,820 lb)• Stake Pockets• 9" x 33" Treadplate Removable Alum Fenders


*** Must have 3,500 lb axles with Tilt Deck Tail option. ***




$63.00

Page 118 of 131 Printed 02/27/2017


Axle Options:31DS * (1) 3,500# (Dexter) Idler / Spring Included 31ED (1) 3,500# (Dexter) Electric / Drop Axle² $315.00 31ES (1) 3,500# (Dexter) Electric / Spring $174.00 31ET (1) 3,500# (Dexter) Electric / Torsion² $315.00 51DS (1) 5,200# (Dexter) Idler / Spring $254.00 51ED (1) 5,200# (Dexter) Electric / Drop Axle² $681.00 51ES (1) 5,200# (Dexter) Electric / Spring $429.00 51ET (1) 5,200# (Dexter) Electric / Torsion² $570.00


Tail Options:S* Straight Deck Incl. B 2' Dovetail w/ 4' Fold-up Gate $220.00 F Straight Deck with Fold In Gate $241.00 G Straight Deck w/ 4' Fold-up Gate $185.00

Other Options:1 LED Lic. Plate Light $6.25 2 2ft Expanded Metal Sides $29.06 / ft 3 Upgrade to 225/75 R15 on 3.5k Axles $88.75 7 Upgrade to 7k Jack $88.75 8 2 Stake Pockets In Front of Trailer $12.50 A Side Mount ATV Ramps (12ft or Longer) $95.00 C Landscape Toolbox (must have 2ft or 4ft Sides) $272.50 E Side Bi-Fold Gate $265.00 F Steel Diamond Plate Fenders $0.00 J LED Light Upgrade Clearance/Marker $45.00 M Expanded Metal Floor $15.31 / ft Q Rubrail $5.00 / ft T Mount Only for Spare Tire $33.75 U Rear Trailer Support Jacks $106.25 V Spare Tire and Mount $130.00 X 16" oc Crossmembers $40.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -EL07 7 Way Plug Upgrade $71.25 -TD01 1 Set of Cargo Tie Down (2) Loops $12.50 -TD02 2 Sets of Cargo Tie Down (4) Loops $27.50 . . $0.00


Page 119 of 131 Printed 02/27/2017


(763) 434-2277 72" Tandem Axle Channel Utility (UJ)

U J 2 0 8 3 2 C S S K1 2 3 4 5 6 7 8 9 10 11 Other

UJ21032CSSK 10' x 72" Tandem Axle Channel Utility $2,080.00









*** Must have 3,500 lb axles with Tilt Deck Tail option. ***




$63.00

Page 120 of 131 Printed 02/27/2017

72" Tandem Axle Channel Utility (UJ) Options

Axle Options:32CS * (2) 3,500# (Dexter) One Electric / Spring Included 32DS (2) 3,500# (Dexter) Idler / Spring ($172.00) 32ED (2) 3,500# (Dexter) Electric / Drop Axle² $458.00 32ES (2) 3,500# (Dexter) Electric / Spring $175.00 32ET (2) 3,500# (Dexter) Electric / Torsion $458.00


32MS (2) 3,500# (Dexter)Surge Hyd. Drum [Surge Coupler] 1 Brake 1 Drag /Spring

$788.00



Tail Options:S* Straight Deck Incl. 2 2' Dovetail w/ 5' Slide-in Ramps $245.00 B 2' Dovetail w/ 4' Fold-up Gate $220.00 F Straight Deck with Fold In Gate $241.00 G Straight Deck w/ 4' Fold-up Gate $185.00

Other Options:2 2ft Expanded Metal Sides $29.06 / ft 3 Upgrade to 225/75 R15 on 3.5k Axles $88.75 4 4ft Expanded Metal Sides $40.00 / ft 5 Regular Sides w/Solid Metal $15.00 / ft 6 Regular Sides w/Expanded Metal $15.00 / ft 7 Upgrade to 7k Jack $88.75 8 2 Stake Pockets In Front of Trailer $12.50 A Side Mount ATV Ramps (12ft or Longer) $95.00 C Landscape Toolbox (must have 2ft or 4ft Sides) $272.50 E Side Bi-Fold Gate $265.00 F Steel Diamond Plate Fenders $0.00 G 4ft Side Gate (14ft or longer) $172.50 J LED Light Upgrade Clearance/Marker $45.00 M Expanded Metal Floor $15.31 / ft P 2" Pipetop Removable Siderails $98.75 Q Rubrail $5.00 / ft S Steel Floor w/ 4 D-Rings & 16"oc $29.06 / ft T Mount Only for Spare Tire $33.75 U Rear Trailer Support Jacks $106.25 V Spare Tire and Mount $130.00 W 12" oc Crossmembers $91.25 X 16" oc Crossmembers $40.00 Z 22" Solid Metal Sides w/ 2" pipe-top $29.06 / ft -BWFL Blackwood Classic Lumber Full Deck $26.25 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -BWOT Blackwood Classic Lumber Outer Deck $15.63 / ft -DR01 1 Pair D-Rings $40.00 -GT10 Ramp Gate Transition Lip $67.50 -TB01 Front Toolbox (with 7k Jack) $258.75 -TD01 1 Set of Cargo Tie Down (2) Loops $12.50 -TD05 5 Sets of Cargo Tie Down (10) Loops $67.50 -WR01 Trimmer Rack Kit $132.50


Page 121 of 131 Printed 02/27/2017



U 7 2 1 0 3 1 D S S K1 2 3 4 5 6 7 8 9 10 11 Other











16' and up must be tandem axle.*** Must have 3,500 lb axles with Tilt Deck Tail option. ***


***Drop and Torsion Axle options will come with Steel Fender. ***Bumper Pull Tongue Length (3' 5").

Coupler Options:2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $33.00 J BP 2 5/16" Adjustable $106.00 M BP 2" Atwood Style A-Frame Coupler $0.00 N BP 2 5/16" Atwood Style A-Frame Coupler $33.00 P 3" Pintle Eye - Channel-mount $106.00



$63.00

Page 122 of 131 Printed 02/27/2017


Axle Options:31DD (1) 3,500# (Dexter) Idler / Drop Axle² $141.00 31DS * (1) 3,500# (Dexter) Idler / Spring Included 31DT (1) 3,500# (Dexter) Idler / Torsion² $141.00 31ED (1) 3,500# (Dexter) Electric / Drop Axle² $315.00 31ES (1) 3,500# (Dexter) Electric / Spring $174.00 31ET (1) 3,500# (Dexter) Electric / Torsion² $315.00


51DS (1) 5,200# (Dexter) Idler / Spring $254.00 51ED (1) 5,200# (Dexter) Electric / Drop Axle² $681.00 51ES (1) 5,200# (Dexter) Electric / Spring $429.00 51ET (1) 5,200# (Dexter) Electric / Torsion² $570.00


Tail Options:S* Straight Deck Incl. 2 2' Dovetail w/ 5' Slide-in Ramps $245.00 4 4' Dovetail w/ 5' Slide-in Ramps $339.00 A 2' Dovetail w/ 2 Fold-up Ramps $291.00 B 2' Dovetail w/ 4' Fold-up Gate $220.00 C Straight Deck w/ 2 Fold-up Ramps $245.00 D 4' Dovetail w/ 2 Fold-up Ramps $385.00 F Straight Deck with Fold In Gate $241.00 G Straight Deck w/ 4' Fold-up Gate $185.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $301.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $349.00 K Straight Deck w/ Bi-Fold Gate $265.00 M 2' Dovetail w/ Bi-Fold Gate $313.00 N 4' Dovetail w/ Bi-Fold Gate $405.00 R Straight Deck w/ 5' Slide-in Ramps $198.00 T Tilt Deck (Single Axle - ATV Use Only) $48.00 U Straight Deck w/ Split Gate $265.00 X 2' Dovetail w/ Split Heavy Duty Gate $429.00

Other Options:2 2ft Expanded Metal Sides $29.06 / ft 3 Upgrade to 225/75 R15 on 3.5k Axles $88.75 4 4ft Expanded Metal Sides $40.00 / ft 5 Regular Sides w/Solid Metal $15.00 / ft 6 Regular Sides w/Expanded Metal $15.00 / ft 7 Upgrade to 7k Jack $88.75 8 2 Stake Pockets In Front of Trailer $12.50 A Side Mount ATV Ramps (12ft or Longer) $95.00 B 4ft Solid Metal Sides $40.00 / ft C Landscape Toolbox (must have 2ft or 4ft Sides) $272.50 F Steel Diamond Plate Fenders $0.00 G 4ft Side Gate (14ft or longer) $172.50 J LED Light Upgrade Clearance/Marker $45.00 M Expanded Metal Floor $15.31 / ft P 2" Pipetop Removable Siderails $98.75 Q Rubrail $5.00 / ft S Steel Floor w/ 4 D-Rings & 16"oc $29.06 / ft T Mount Only for Spare Tire $33.75 U Rear Trailer Support Jacks $106.25 V Spare Tire and Mount $130.00 W 12" oc Crossmembers $91.25 X 16" oc Crossmembers $40.00 Z 22" Solid Metal Sides w/ 2" Pipe Top $29.06 / ft -BWFL Blackwood Classic Lumber Full Deck $26.25 / ft -BWOT Blackwood Classic Lumber Outer Deck $15.63 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -GT10 Ramp Gate Transition Lip $67.50 -TB01 Front Toolbox (with 7k Jack) $258.75 -TD01 1 Set of Cargo Tie Down (2) Loops $12.50 -TW05 Upgrade to 235/80 R16 on 5.2 Axles $122.50 -WP01 Plate for Winch $145.00 -WR01 Trimmer Rack Kit $132.50


Page 123 of 131 Printed 02/27/2017


(763) 434-2277 77" Tandem Axle Channel Utility (UK)

U K 2 0 8 3 2 C S S K1 2 3 4 5 6 7 8 9 10 11 Other

UK21032CSSK 10' x 77" Tandem Axle Channel Utility $2,093.00








*** Must have 3500lb axles with Tilt Deck Tail option. ****** 5,200 lb axles come with 16" on center cross members. ***

*** Drop and Torsion Axle options will come with Steel Fender. ***Bumper Pull Tongue Length (3' 5").




$63.00

Page 124 of 131 Printed 02/27/2017

77" Tandem Axle Channel Utility (UK) Options

Axle Options:32CS * (2) 3,500# (Dexter) One Electric / Spring Included 32DS (2) 3,500# (Dexter) Idler / Spring ($172.00) 32ED (2) 3,500# (Dexter) Electric / Drop Axle² $458.00 32ES (2) 3,500# (Dexter) Electric / Spring $175.00 32ET (2) 3,500# (Dexter) Electric / Torsion $458.00


32MS (2) 3,500# (Dexter)Surge Hyd. Drum [Surge Coupler] 1 Brake 1 Drag /Spring

$788.00



Tail Options:S* Straight Deck Incl. 2 2' Dovetail w/ 5' Slide-in Ramps $245.00 4 4' Dovetail w/ 5' Slide-in Ramps $339.00 A 2' Dovetail w/ 2 Fold-up Ramps $291.00 B 2' Dovetail w/ 4' Fold-up Gate $220.00 C Straight Deck w/ 2 Fold-up Ramps $245.00 D 4' Dovetail w/ 2 Fold-up Ramps $385.00 E 4' Dovetail w/ 4' Fold-up Gate $340.00 F Straight Deck with Fold In Gate $241.00 G Straight Deck w/ 4' Fold-up Gate $185.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $301.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $349.00 K Straight Deck w/ Bi-Fold Gate $265.00 M 2' Dovetail w/ Bi-Fold Gate $313.00 N 4' Dovetail w/ Bi-Fold Gate $405.00 P 2' Dovetail w/ Split Gate $313.00 Q Straight Deck w/ Split Heavy Duty Gate $394.00 R Straight Deck w/ 5' Slide-in Ramps $198.00 T Tilt Deck (Single Axle - ATV Use Only) $48.00 U Straight Deck w/ Split Gate $265.00 V 2' Dovetail w/Ramp Bars Only $65.00 X 2' Dovetail w/ Split Heavy Duty Gate $429.00 Y 2' Dovetail w/ 3' Fold-up Gate $220.00 Z Straight Deck w/ 3' Fold-up Gate $185.00

Other Options:2 2ft Expanded Metal Sides $29.06 / ft 3 Upgrade to 225/75 R15 on 3.5k Axles $88.75 4 4ft Expanded Metal Sides $40.00 / ft 5 Regular Sides w/Solid Metal $15.00 / ft 6 Regular Sides w/Expanded Metal $15.00 / ft 7 Upgrade to 7k Jack $88.75 8 2 Stake Pockets In Front of Trailer $12.50 A Side Mount ATV Ramps (12ft or Longer) $95.00 C Landscape Toolbox (must have 2ft or 4ft Sides) $272.50 E Side Bi-Fold Gate $265.00 F Steel Diamond Plate Fenders $0.00 G 4ft Side Gate (14ft or longer) $172.50 J LED Light Upgrade Clearance/Marker $45.00 M Expanded Metal Floor $15.31 / ft P 2" Pipetop Removable Siderails $98.75 Q Rubrail $5.00 / ft S Steel Floor w/ 4 D-Rings & 16"oc $29.06 / ft T Mount Only for Spare Tire $33.75 U Rear Trailer Support Jacks $106.25 V Spare Tire and Mount $130.00 W 12" oc Crossmembers $91.25 X 16" oc Crossmembers $40.00 Z 22" Solid Metal Sides w/ 2" Pipe Top $29.06 / ft -BWFL Blackwood Classic Lumber Full Deck $26.25 / ft -BWOT Blackwood Classic Lumber Outer Deck $15.63 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -GT10 Ramp Gate Transition Lip $67.50 -TB01 Front Toolbox (with 7k Jack) $258.75 -TD01 1 Set of Cargo Tie Down (2) Loops $12.50 -TD05 5 Sets of Cargo Tie Down (10) Loops $66.25 -WR01 Trimmer Rack Kit $132.50


Page 125 of 131 Printed 02/27/2017



U 8 2 1 0 3 1 D S S K1 2 3 4 5 6 7 8 9 10 11 Other











16' and up must be tandem axle.*** Must have 3,500 lb axles with Tilt Deck Tail option. ***


*** Drop and Torsion Axle options will come with Steel Fender. ****** Trailer will have 80" Frame with Drop & Torsion Axles ***




Powder Coat Color Options:Black (k) * Incl. No Paint (z) $0.00Desert Tan (t) Grey (g) Red (r) Tractor Green (j) Tractor Orange (n) White (w)

$63.00

Page 126 of 131 Printed 02/27/2017


Axle Options:31DS * (1) 3,500# (Dexter) Idler / Spring Included 31DT (1) 3,500# (Dexter) Idler / Torsion² $274.00 31ED (1) 3,500# (Dexter) Electric / Drop Axle² $315.00 31ES (1) 3,500# (Dexter) Electric / Spring $174.00


51DS (1) 5,200# (Dexter) Idler / Spring $254.00 51ED (1) 5,200# (Dexter) Electric / Drop Axle² $681.00 51ES (1) 5,200# (Dexter) Electric / Spring $429.00


Tail Options:S* Straight Deck Incl. 2 2' Dovetail w/ 5' Slide-in Ramps $245.00 4 4' Dovetail w/ 5' Slide-in Ramps $339.00 A 2' Dovetail w/ 2 Fold-up Ramps $291.00 B 2' Dovetail w/ 4' Fold-up Gate $220.00 C Straight Deck w/ 2 Fold-up Ramps $245.00 D 4' Dovetail w/ 2 Fold-up Ramps $385.00 E 4' Dovetail w/ 4' Fold-up Gate $340.00 F Straight Deck with Fold In Gate $255.00 G Straight Deck w/ 4' Fold-up Gate $200.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $314.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $361.00 K Straight Deck w/ Bi-Fold Gate $278.00 M 2' Dovetail w/ Bi-Fold Gate $326.00 P 2' Dovetail w/ Split Gate $326.00 R Straight Deck w/ 5' Slide-in Ramps $198.00 T Tilt Deck (Single Axle - ATV Use Only) $48.00 U Straight Deck w/ Split Gate $278.00 X 2' Dovetail w/ Split Heavy Duty Gate $441.00

Other Options:2 2ft Expanded Metal Sides $29.06 / ft 3 Upgrade to 225/75 R15 on 3.5k Axles $88.75 4 4ft Expanded Metal Sides $40.00 / ft 5 Regular Sides w/Solid Metal $15.00 / ft 6 Regular Sides w/Expanded Metal $15.00 / ft 7 Upgrade to 7k Jack $88.75 A Side Mount ATV Ramps (12ft or Longer) $95.00 B 4ft Solid Metal Sides $40.00 / ft C Landscape Toolbox (must have 2ft or 4ft Sides) $272.50 F Steel Diamond Plate Fenders $0.00 G 4ft Side Gate (14ft or longer) $172.50 H 2 ft. Side Rails (No Mesh) $8.44 / ft J LED Light Upgrade Clearance/Marker $45.00 M Expanded Metal Floor $15.31 / ft P 2" Pipetop Removable Siderails $98.75 S 11ga DP Steel Floor w/4 D-Rings & 16"oc $29.06 / ft T Spare Tire Mount $33.75 U Rear Trailer Support Jacks $106.25 V Spare Tire and Mount $130.00 W 12" oc Crossmembers $91.25 X 16"oc Crossmembers $40.00 Z 22" Solid Metal Sides w/ 2" pipe-top $29.06 / ft -BWFL Blackwood Classic Lumber Full Deck $26.25 / ft -BWOT Blackwood Classic Lumber Outer Deck $15.63 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 -DR01 1 Pair D-Rings $40.00 -GT10 Ramp Gate Transition Lip $67.50 -SEM9 3ft 12ga Solid Metal Sides $34.38 / ft -TB01 Front Toolbox (with 7k Jack) $258.75 -TD01 1 Set of Cargo Tie Down (2) Loops $12.50 -TW05 Upgrade to 235/80 R16 on 5.2 Axles $122.50 -WR01 Trimmer Rack Kit $132.50


Page 127 of 131 Printed 02/27/2017


(763) 434-2277 83" Tandem Axle Channel Utility (UL)

U L 2 0 8 3 2 C S S K1 2 3 4 5 6 7 8 9 10 11 Other

UL21032CSSK 10' x 83" Tandem Axle Channel Utility $2,156.00









*** Must have 3,500 lb axles with Tilt Deck Tail option. ****** 5,200 lb axles come with 16" on center cross members. ***

*** Drop and Torsion Axle options will come with Steel Fender. ****** Trailer will have 80" Frame with Drop & Torsion Axles. ***





$63.00

Page 128 of 131 Printed 02/27/2017

83" Tandem Axle Channel Utility (UL) Options

Axle Options:32CD (2) 3,500# (Dexter) One Electric / Drop Axle² $283.00 32CS * (2) 3,500# (Dexter) One Electric / Spring Included 32CT (2) 3,500# (Dexter) One Electric / Torsion² $415.00 32DS (2) 3,500# (Dexter) Idler / Spring ($172.00) 32ED (2) 3,500# (Dexter) Electric / Drop Axle² $458.00 32ES (2) 3,500# (Dexter) Electric / Spring $175.00 32ET (2) 3,500# (Dexter) Electric / Torsion² $590.00



$788.00




Tail Options:S* Straight Deck Incl. 2 2' Dovetail w/ 5' Slide-in Ramps $245.00 3 4' Dovetail w/ Split Gate $419.00 A 2' Dovetail w/ 2 Fold-up Ramps $291.00 B 2' Dovetail w/ 4' Fold-up Gate $220.00 C Straight Deck w/ 2 Fold-up Ramps $245.00 D 4' Dovetail w/ 2 Fold-up Ramps $385.00 E 4' Dovetail w/ 4' Fold-up Gate $340.00 F Straight Deck with Fold In Gate $255.00 G Straight Deck w/ 4' Fold-up Gate $200.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $314.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $361.00 K Straight Deck w/ Bi-Fold Gate $278.00 M 2' Dovetail w/ Bi-Fold Gate $326.00 P 2' Dovetail w/ Split Gate $326.00 Q Straight Deck w/ Split Heavy Duty Gate $394.00 R Straight Deck w/ 5' Slide-in Ramps $198.00 T Tilt Deck (Single Axle - ATV Use Only) $48.00 W Straight Deck w/ 3' Fold-up Gate $174.00 X 2' Dovetail w/ Split Heavy Duty Gate $441.00 Y 2' Dovetail w/ 3' Fold-up Gate $220.00

Other Options:2 2ft Expanded Metal Sides $29.06 / ft 3 Upgrade to 225/75 R15 on 3.5k Axles $88.75 4 4ft Expanded Metal Sides $40.00 / ft 5 Regular Sides w/Solid Metal $15.00 / ft 6 Regular Sides w/Expanded Metal $15.00 / ft 7 Upgrade to 7k Jack $88.75 8 2 Stake Pockets In Front of Trailer $12.50 A Side Mount ATV Ramps (12ft or Longer) $95.00 C Landscape Toolbox (must have 2ft or 4ft Sides) $272.50 E Side Bi-Fold Gate $277.50 F Steel Diamond Plate Fenders $0.00 G 4ft Side Gate (14ft or longer) $172.50 J LED Light Upgrade Clearance/Marker $45.00 K 4 ft. Side Rails (No Mesh) $16.88 / ft M Expanded Metal Floor $15.31 / ft P 2" Pipetop Removable Siderails $98.75 Q Rubrail $5.00 / ft S 11ga DP Steel Floor w/4 D-Rings & 16"oc $29.06 / ft T Spare Tire Mount $33.75 U Rear Trailer Support Jacks $106.25 V Spare Tire and Mount $130.00 W 12" oc Crossmembers $91.25 X 16"oc Crossmembers $40.00 Z 22" Solid Metal Sides w/ 2" pipe-top $29.06 / -BWFL Blackwood Classic Lumber Full Deck $26.25 / ft -BWOT Blackwood Classic Lumber Outer Deck $15.63 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $75.00 -DR01 1 Pair D-Rings $40.00 -GT10 Ramp Gate Transition Lip $67.50 -TB01 Front Toolbox (with 7k Jack) $258.75 -TD01 1 Set of Cargo Tie Down (2) Loops $12.50 -TD05 5 Sets of Cargo Tie Down (10) Loops $66.25 -WR01 Trimmer Rack Kit $132.50


Page 129 of 131 Printed 02/27/2017

Product Code Trailer Model Deck Length Deck

HeightDeck

Width*Width Inside

FendersNo. of Axles Axle Sizes (lbs) Std. Tire Size

A6 60” All Steel Utility 8’ & 10’ 21” 60” 60” 1 3500 205/75/R15B5 5” Channel Buggy Hauler 18’ & 20’ 22” 102” 83” 2 3500, 5200 205/75/R15B6 6” Channel Super-Wide 16’ - 24’ 26” 102” 81.5” 2 5200, 7000 235/80/R16B8 8” Channel Super-Wide 20’ - 44’ 28” 102” 81.5” 2 or 3 7000 235/80/R16C1 Single Axle HD Carhauler 10’-16’ 21” 83” 83” 1 7000 235/80/R16C4 4” Channel Carhauler 14’, 16’, & 18’ 21” 83” 83” 2 3500 205/75/R15C5 5” Channel Carhualer 14’ - 20’ 22” 83” 83” 2 3500 205/75/R15C8 8” Channel Equipment 20’ - 40’ 27” 83” 83” 2 or 3 7000, 8000 235/80/R16CC 6” Channel Equipment 16’ - 24’ 25” 83” 83” 2 or 3 5200, 7000, 8000 235/80/R16CE 5” Channel Equipment 12’-22’ 22” 83” 83” 2 5200 225/75/R15D2 78” Medium Duty Dump 10’ & 12’ 28” 78” 78” 2 3500, 5200 225/75/R15D3 72” Tandem Axle Dump 10’-12’ 28” 72” 72” 2 5200, 7000 225/75/R15D5 60” Utility Dump 8’ & 10’ 26” 60” 60” 1 or 2 3500, 5200 225/75/B15D7 83” Tandem Axle Dump 10’ - 14’ 32” 83” 83” 2 5200, 7000 235/80/R16D8 96” Deckover Dump 14’ 34” 96” N/A 2 7000, 8000 235/80/R16D9 83” XL Dump 16’ 32” 83” 83” 2 7000 235/80/R16DC 83” XL High Side Dump 16’ 32” 83” 83” 2 or 3 7000 235/80/R16DD Tandem Dual Dump 16’ - 20’ 39” 94” N/A 2 10000, 12000 235/80/R16DH 83” High Side Dumpx 10’-14’ 32” 83” 83” 2 7000 235/80/R16DJ 83” Low Pro XL Dump 16’ 24” 83” 83” 2 or 3 7000 235/80/R16DK 83” Low Pro XL High Side Dump 16’ 24” 83” 83” 2 or 3 7000, 8000 235/80/R16DL 83” Low-Pro Dump 12’ & 14’ 24” 83” 83” 2 7000 235/80/R16DM 83” Low Pro High Side Dump 12’ & 14’ 24” 83” 83” 2 7000, 8000 235/80/R16DN 84” Deckover Dump 10’, 12’, & 14’ 32” 84” N/A 2 5200, 7000 235/80/R16DR Rollster™ Roll Off Dump 14’ 32” 83” N/A 2 7000, 8000 235/80/R16DS 16’ Deckover Dump 16’ 38” 91” N/A 2 7000, 8000 235/80/R16DT 10” I-Beam Deckover Dump 14’, 16’ 34” 96” N/A 2 7000, 8000 235/80/R16F8 8” I-beam Deckover 16’ - 30’ 33” 96” N/A 2 or 3 5200, 7000 , 8000 235/80/R16FD Classic Flatdeck with Dual 20’ - 40’ 38” 102” N/A 2 or 3 10000, 12000, 16000 235/80/R16FS Classic Flatdeck with Singles 20’ - 40’ 36” 102” N/A 2 or 3 7000, 8000 235/80/R16FY Flatdeck with Hydraulic Dovetail 30’ - 40’ 37” 102” N/A 2 or 3 10000, 12000, 16000 235/80/R16L3 14” I-Beam Low-Pro with Duals 20’- 42’ 36” 102” N/A 2 or 3 10000, 12000, 16000 235/80/r16L5 Light Duty Deckover 16’ - 20’ 30” 102” N/A 2 3500 225/75/R15L6 Medium Duty Deckover 16’ - 20’ 33” 102” N/A 2 5200 225/75/R15LD Low-Pro with Duals 20’ - 40’ 33” 102” N/A 2 or 3 10000, 12000 235/80/R16LS Low-Pro Flatdeck with Singles 20’-44’ 33” 102” N/A 2 or 3 7000, 8000 235/80/R16LY Low-Pro with Hydraulic Dovetail 30’ - 40’ 33” 102” N/A 2 or 3 10000, 12000 235/80/R16P6 Angle Pipetop Trailer 14’ - 20’ 19” 83” 83” 2 3500 205/75/R15P7 Angle Pipetop Trailer 16’, 18’, & 20’ 21” 83” 83” 2 5200 225/75/R15P8 Angle Pipetop Trailer 16’, 18’, & 20’ 23” 83” 83” 2 7000 235/80/R16PD Classic Pintle with Duals 20’ - 40’ 38” 102” N/A 2 or 3 10000, 12000, 15000 235/80/R16PL Low-Pro Pintle with Duals 20’ - 40’ 33” 102” N/A 2 or 3 10000, 12000, 15000 235/80/R16PT Pipe Hauler 40’ 35” 84” N/A 2 or 3 7000 235/80/R16SD Step Deck Trailer 41’ - 53’ (total) 38” 102” N/A 2 or 3 12000, 15000, 16000 235/80/R16SY Flatdeck with Singles Hydr Dove 32’ - 40’ 36” 102” N/A 3 7000, 8000 235/80/R16T1 Single Axle HD Tilt 13’, 16’ 21” 81” 81” 1 7000 235/80/R16T5 5” Channel Tilt 16’ & 20’ 24” 83” 83” 2 3500, 5200 225/75/R15T6 6” Channel Tilt 16’, 20’, 22’, & 24’ 21” 83” 82” 2 or 3 7000 235/80/R16T7 8” Channel Tilt 16’ - 40’ 24” 83” 82” 2 or 3 7000, 8000 235/80/R16T8 Deckover Tilt 22’ & 26’ 32” 96” N/A 2 7000, 8000 235/80/R16T9 HD Deckover Tilt 24’, 26’, 28’, & 30’ 36” 102” N/A 2 7000, 8000 235/80/R16TD Tandem Dual Tilt 24’ - 40’ 37” 102” N/A 2 10000, 12000 235/80/R16TF Powered Full Tilt 18’ - 24’ 22” 83” 82” 2 5200, 7000 235/80/R16TH 83” Hydraulic Quick Tilt 16’ - 20’ 24” 83” 83” 2 3500, 5200 205/75/R15TJ 6” Channel HD Equipment Tilt 16’ - 24’ 23” 82” 82” 2 or 3 7000, 8000 235/85/R16TK 8” Channel HD Equipment Tilt 16’ - 44’ 23” 82” 82” 2 or 3 7000, 8000 235/85/R16TM 83” Manual Tilt 16’, 18’, & 20’ 23” 83” 83” 2 3500, 5200 205/75/R15U2 72” Channel Utility 8’ - 14’ 21” 72” 72” 1 3500, 5200 205/75/R15U6 60” Channel Utility 8’ - 20’ 21” 60” 60” 1 3500, 5200 205/75/R15U7 77” Channel Utility 8’ - 20’ 21” 77” 77” 1 3500, 5200 205/75/R15U8 83” Channel Utility 8’ - 20’ 21” 83” 83” 1 3500, 5200 205/75/R15UC 60” Tandem Channel Utility 10’ - 20’ 21” 60” 60” 2 3500, 5200 205/75/R15UJ 72” Tandem Channel Utility 10’ - 22’ 21” 72” 72” 2 3500, 5200 205/75/R15UK 77” Tandem Channel Utility 10’ - 22’ 21” 77” 77” 2 3500, 5200 205/75/R15UL 83” Tandem Channel Utility 10’ - 22’ 21” 83” 83” 2 3500, 5200 205/75/R15

Please Note: Specifications subject to change without notice. Please contact PJ Trailers directly to verify specifications. All measurements may vary +/- 1”* Deck width measured from rub rail to rub rail where applicable.

PRODUCT SPECIFICATION GUIDE

Date post:	13-Mar-2018
Category:	Documents
Upload:	truongminh
View:	219 times
Download:	3 times

TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, …5... · TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG,...

Documents