Training Catalogue 2020 - SYBERA

Training Catalogue 2020

SYBERA GmbH, Hohenzollernstr. 2, D-71088 Holzgerlingen, Germany, Tel: ++49-7031-411781 (Fax: -744609) page 2

The training center of Sybera The SYBERA training center was founded in 1997 in Holzgerlingen (Germany). Every year participants from all over Europe will be welcomed. The SYBERA Training Center offers developer seminars on kernel and UEFI software, real-time control, fieldbus solutions and wireless communication. The training offer covers all areas of system software development, from Windows driver model, real-time control, UEFI firmware development, Bluetooth communication and design to the integration of Windows IoT. SYBERA has modern training facilities and offers both internal as well as external training.

Among others, the tools WDK, WDF, KMDF, UMDF, SDK and Visual Studio, as well as Image Builder Wizard, Im-age Configuration Editor, EDK-II, TianoCore, Wireshark and CSR Bluetooth DevKit are used. The success of any development requires the safe use of these tools. In addition to the detailed basics, we will of course also on your specific needs. We have state-of-the-art training room equipment (video projectors, portable development systems, fieldbus devices) as well as the latest accompanying literature and offer both internal and external training.


Train and Solve – Training without loss of time

The issue: for the urgently needed knowledge, employees should go to training, but during that time they cannot spent time on the project.

The solution: Train and Solve - The concept "Train and Solve" at SYBERA allows even during the training to program and con-tinue with the project. The participants can use their own hardware (PC, adapter, devices) in the training and im-plement the relevant exercises within the project. With our expertise and many years of training experience, we are able to offer "Train and Solve" to improve its efficiency of knowledge implementation.

Your partner for International

developer training


Content

TRAINING „WDM / WDF DRIVER DEVELOPMENT” 5

TRAINING „USB DRIVER DEVELOPMENT WITH WDF” 8

TRAINING „NDIS DRIVER DEVELOPMENT” 10

TRAINING „WINDOWS SYSTEM BASED PROGRAMMING” 12

TRAINING „WINDOWS IOT” 14

TRAINING „OOP PROGRAMMING WITH C# 16

TRAINING „REAL-TIME PROGRAMMING” 18

TRAINING „UEFI FIRMWARE DEVELOPMENT" 20

TRAINING „BLUETOOTH – DEVELOPMENT AND DESIGN” 22

TRAINING „ETHERCAT” 24

TRAINING „PROFINET" 26

TRAINING „CANBUS – DEVELOPMENT AND DESIGN" 28

TRAINING „GIGE VISION ENTWICKLUNG" 30

DATES AND PRICES 31


Developer Training



Developer Training


Training „WDM / WDF Driver Development” This course is a "must" for any developer who wants to build kernel drivers (WDM, KMDF and UMDF) for Windows. With the Windows Driver Framework (WDF), Microsoft has created a new development environment for the driver programming (KMDF and UMDF), which facilitates many things, but also brings new challenges. The aim of this training is to uncover the back-ground of the WDF and to compare it with the traditional Windows Driver Model (WDM) and to implement own kernel driver (device driver, device driver) projects. Practical examples cover the topics KMDF and WDM objects, IOCTL communication, development environment, and hard-ware resources, .INF files, and code signing. The course is therefore aimed at all developers who need to implement new kernel drivers (KMDF and UMDF) projects quickly and efficiently.

Content Windows system architecture WDK development environment Visual Studio development environment WDM Kernel driver model IOCTL device communication Kernel mode driver framework (KMDF) KMDF objects, I/O model, dispatch types bus systems and parameters resources management physical memory (IO-Port, Mapped Memory) DMA methods Kernel interrupt management Kernel event and timer Handling UMDF COM model PNP and Power Management Stack synchronization INF files Driver signing

Requirements The training requires knowledge about C/C++ programming under Windows. Knowledge about hardware resources is helpful.

Duration 5 days, including training material (documentation, samples) and lunch

Note The courses take place in the training rooms of SYBERA in Holzgerlingen (Germany). SYBERA also offers this training at customer site (InHouse training). The dates are agreed with the cus-tomer. The InHouse flat rate, regardless of the number of participants (5 days at location), is 7875, -EUR, plus travel expenses and 50, - EUR training material per participant. All prices plus VAT (depending on international regulations).


Developer Training



Developer Training


Training „USB Driver Development with WDF” The WDF Framework is the ideal development platform for the development of USB device drivers. In this seminar, SYBERA provides the prerequisites for the development of efficient USB device drivers with the WDF Framework. The training handles the topics WDF develop-ment environment, USB KMDF / UMDF objects, USB initialization, USB interfaces, USB trans-fer, USB Pipes, PNP and power management are the priorities USB basics, WDF Framework, which are discussed in detail. The training is aimed at software developers with experience in the kernel driver development under Windows.

Content USB basics USB stack architecture WDF Framework Kernel development environment KMDF / UMDF objects and methods USB driver initialization USB driver interfaces URB Kernel driver communication USB transfer (Control, Bulk, Interrupt, Isochronous) USB pipe handling (IN, OUT, Control) USB PNP / power management Coinstaller Kernel driver installation and INF-files Driver Signing

Requirements The training requires knowledge about C/C++ programming under Windows. Knowledge about USB hardware is helpful.




Developer Training


virtual NIC

Transport

NDIS wrapper

IRP-Queue

I/O-Manager

Control-Application

TDI

TransportDrivers

NICDrivers

Packet-Queue

Client-Application

Transport - Helper DLL´s


Developer Training


Training „NDIS Driver Development” This course provides in-depth knowledge of the NDIS network architecture. The participant learns the NDIS communication methods and protocol layers. The participant will be able to develop both NDIS miniport and NDIS intermediate drivers. In addition to the introduction to the Windows network architecture, both the construction of an NDIS kernel Miniport driver, and the structure of an NDIS intermediate driver kernel is explained in detail by examples. Among others topics, sending and receiving of ethernet packets, the OID management, and resource management will be discussed in detail. The training allows with aid of examples and practical exercises a comprehensive insight into the NDIS kernel driver devel-opment under Windows.

Content Windows network architecture (OSI model) NDIS Kernel Wrapper NDIS miniport drivers interfaces of NDIS NDIS OID management NDIS miniport driver initialization miniport hardware resource management sending and receiving of NDIS packets NDIS special function and communication architecture of NDIS intermediate drivers NDIS intermediate driver bindings intermediate driver protocol management intermediate filter management network driver INF files driver signing

Requirements The training requires knowledge about C/C++ programming under Windows, as well as basic knowledge of the network architecture is required.

Duration 5 days, including training material (documentation, samples) and lunch.

Note The courses take place in the training rooms of SYBERA in Holzgerlingen (Germany). SYBERA also offers this training at customer site (InHouse training). The dates are agreed with the cus-tomer. The InHouse flat rate, regardless of the number of participants (5 day at location), is 11375, -EUR, plus travel expenses and 50, - EUR training material per participant. All prices plus VAT (depending on international regulations).


Developer Training


I/O-Manager

CLASS Driver

Port Driver

Application

USER Mode

KERNEL Mode

IRP-Stack

FileSubSystem

System Services

StartIoControl

StartIoControl

Dispatch

Dispatch


Developer Training


Training „Windows system based Programming” This course forms the basis for the driver development under Windows. The course teaches all basics of communicating with the Windows operating system. In addition, the participant learns the important interfaces to the system and is able to communicate with Windows drivers.

Content Windows system architecture system services and native API driver stacks driver handling system files process management multitasking and thread management memory management PNP management windows registry setup API interrupt handling event handling Socket and COMM Interface

Requirements The training requires knowledge about C/C++ programming under Windows




Developer Training



Developer Training


Training „Windows IoT” Windows IoT is the quasi successor to Embedded Standard (WES). Windows IoT is a complete-ly component-based version of Windows. Windows IoT is the right choice for industrial software that supports most existing Windows applications and drivers. The course "Windows IoT" teaches about scaling and configuration of the Windows operating system. The participant will be able both, to generate an operating system image, and maintain the image and duplicate it.

Content Basics of IoT Core Basics of image configuration Introduction to the Image Builder Wizard (IBW) Driver Guidance and Deployment IoT Core Default App Deploy Applications Debugging Connectivity Device Management Secure Devices Resources Accessibility Language Support Embedded Mode Unified Write Filter (UWF) Bus Providers On-screen Keyboard IoT Shell Iot Real-Time Preparation of the target media Generation of the embedded image Deployment Image Servicing and Management (DISM) SysPrep, ImageX and WimMount

Requirements none


Note The courses take place in the training rooms of SYBERA in Holzgerlingen (Germany). SYBERA also offers this training at customer site (InHouse training). The dates are agreed with the customer. The InHouse flat rate, regardless of the number of participants (2 days at location), is 4025, -EUR, plus travel expenses and 50, - EUR training material per participant. All prices plus VAT (depending on international regulations).


Developer Training



Developer Training


Training „OOP Programming with C# This course provides knowledge about object-oriented programming under the Microsoft .NET Framework. The participant learns the essential language elements under NET. After the train-ing, he will be able to develop his own programs as a console, as a Windows or as a web appli-cation. Another essential. Part of this is the access to databases. The development environment is Visual Studio NET, the programming language is C #.

Content basics OOP and C# introduction into .Net Framework error handling and debugging Assemblies and GAC NET classes, methods and properties heritage, polymorphism events and delegates interfaces MDI forms file system control ADO.NET and Windows forms database access datareader and dataset inline code and code behind application, session, viewstate web services, XML and SOAP

Requirements The training requires knowledge about C/C++ programming with VisualStudio

Duration 3 days, including training material (documentation, samples) and lunch.



Developer Training


Application

SHA-API

HAL

SHA-Drv

NT-KernelundSystem-Services

RTX-Routine(){ ... }

RTX-Routine(){ ... }

RTX-Timebase


Developer Training


Training „Real-Time Programming” This course teaches the basics of the real-time technology, the internal processes and the pro-gramming of real-time systems. The participant will be able, to programmatically implement time-critical processes by a corresponding real-time development environment, as well as to analyze real-time programs.

Content real-time technology cyclic based real-time event based real-time real-time software real-time and development platforms access to hardware resources DMA and real-time real-time debugger and sequencer system analysis failsafe mechanism transport layers protocol layers development tools platform influence

Requirements The training requires knowledge about C/C++ programming with VisualStudio

Duration 1 day, including training material (documentation, samples) and lunch

Note The courses take place in the training rooms of SYBERA in Holzgerlingen (Germany). SYBERA also offers this training at customer site (InHouse training). The dates are agreed with the cus-tomer. The InHouse flat rate, regardless of the number of participants (1 day at location), is 2625, -EUR, plus travel expenses and 50, - EUR training material per participant. All prices plus VAT (depending on international regulations).


Developer Training


Security(SEC)

Pre EFIInitialization(PEI)

DriverExecutionEnvironment(DXE)

Boot DeviceSelect(BDS)

TransientSystem Load(TSL)

RunTime(RT)

Startup

PEICore

CPU Init

Chipset Init

Board Init

Device Driver,Bus Driver,Service Driver

BootManager

OS-AbsentApp

UEFI Shell

TransientOS BootLoader(BOOTMGR.EFI)

Final OSBoot Loader(WINLOAD.EFI)

OS PresentApp

Final OSEnvironment

DXE DriverDispatcher

ArchitecturalProtocols


Developer Training


Training „UEFI Firmware Development" This course is a "must" for any developer who wants to create their own UEFI firmware or BOOT loader software. This course offers the opportunity to get to know the topic of UEFI in depth. The aim of this training is to uncover the background of UEFI and to realize own UEFI driver projects. The training is aimed at hardware as well as software developers who are famil-iar with the subject of UEFI and have to develop or supplement UEFI firmware.

Content UEFI and Legacy BIOS UEFI specification UEFI Shell Shell Script Memory Layout (SMRAM and Memory Map) UEFI GUID Interface services and protocols UEFI application development EDK-II development environment development with Visual Studio OVMF with QEMU and TIANOCORE UEFI Debugging UEFI DXE Driver Resource Management UEFI PCI resource management Post-DXE Management Runtime Driver SMM Management SMM Driver Data Storage Secure Boot and Key Management UEFI Driver Signing

Requirements The training requires knowledge about C/C++ programming.


Note The courses take place in the training rooms of SYBERA in Holzgerlingen (Germany). SYBERA also offers this training at customer site (InHouse training). The dates are agreed with the customer. The InHouse flat rate, regardless of the number of participants (3 days at location), is 8225,- EUR, plus travel expenses and 50, - EUR training material per participant. All prices plus VAT (depending on international regulations).


Developer Training



Developer Training


Training „Bluetooth – Development and Design” Bluetooth - a wireless connection with security. You are planning to develop a Bluetooth product and we will familiarize you with the necessary information and resources of Bluetooth technolo-gy. From hardware design, to protocol connection, to certification - This training teaches the basics of the Bluetooth standard and is aimed at all developers and users, both in the software area and in the hardware area. With practical exercises and appropriate hardware, the develop-ers will be guided through the topic. This training is the fast way to Bluetooth in a day, with ex-amples and exercises.

Content Bluetooth - concepts and strategy basics of the Bluetooth technology basics of the Bluetooth hardware design introduction into the antennas technology Bluetooth development tools layout of the HOST protocol stack introduction into the Bluetooth L2CAP protocol introduction into Bluetooth HCI protocol basics of USB and UART coupling Bluetooth Baseband and RF specification layout of the hardware protocol stack layout and function of the Link Manager Bluetooth ACL and SCO communication basics of Bluetooth security basics of Bluetooth certification Bluetooth Low Energy (BLE)

Requirements none

Duration 1 day, including training material (documentation, samples) and lunch

Note The courses take place in the training rooms of SYBERA in Holzgerlingen (Germany). SYBERA also offers this training at customer site (InHouse training). The dates are agreed with the cus-tomer. The InHouse flat rate, regardless of the number of participants (1 day at location), is 2625,- EUR, plus travel expenses and 50, - EUR training material per participant. All prices plus VAT (depending on international regulations).


Developer Training



Developer Training


Training „EtherCAT” Today, different Ethernet standards are available for fieldbus communication. Fieldbus communica-tion does not only differ in terms of a different protocol specification, but also in different bus topol-ogies. In order to be able to use the fieldbus communication efficiently, Sybera offers the training EtherCAT development. During our training, we transfer knowledge neutral and product independ-ent. The training provides a comprehensive insight into the EtherCAT technology, based on exam-ples and practical exercises. The training participants receive detailed background information about the EtherCAT technology for daily use and consolidate their knowledge with Wireshark anal-ysis. The training participants will also be able to independently configure, program and analyze EtherCAT projects. The training is aimed at all developers, users and service technicians.

Content basics of industrial ethernet ethernet frame layout datagram structure register interface EEPROM interface state management logical and physical module addressing SYNC management FMMU management mailbox communication COE and PDO assignment EtherCAT and determinism distributed clock error management ESI files EtherCAT safety

Requirements none


Note The courses take place in the training rooms of SYBERA in Holzgerlingen (Germany). SYBERA also offers this training at customer site (InHouse training). The dates are agreed with the cus-tomer. The InHouse flat rate, regardless of the number of participants (2 days at location), is 4025,- EUR, plus travel expenses and 50, - EUR training material per participant. All prices plus VAT (depending on international regulations).


Developer Training



Developer Training


Training „ProfiNET" To apply the ProfiNET communication efficiently, SYBERA provides the training "ProfiNET Devel-opment". In our training we provide the knowledge neutral and product-independent. The training allows with aid of examples and practical exercises a comprehensive insight into the ProfiNET technology. The training handles the topics ProfiNET specification, topology, protocol manage-ment, Profinet services, communication and application associations, acyclic and cyclic protocols ProfiNET RT and IRT communication, treated alarm handling, planning, GSDML device description and configuration in detail. Participants of the training will be provided by detailed background in-formation on the ProfiNET technology for everyday use and consolidate their knowledge with Wireshark - analyzes. The participants of the training will be able to configure and program ProfiNET projects autonomously, as well as to analyze errors. The training thus aimed at all devel-opers and service technicians.

Content ProfiNET overview basics of ProfiNET IO ProfiNET IO specification ProfiNET frames ProfiNET services application relations communication relations diagnostic concepts alarm management acyclic data transfer cyclic data transfer ProfiNET RT / IRT communication ProfiSAFE ProfiNET projects GSDML device description

Requirements none




Developer Training



Developer Training


Training „CANBus – Development and Design" CANBus - the widespread fieldbus in the automotive industry. This course explains the basics of CAN (open) standards and is aimed at developers, both in the software sector, and in the hardware area. With practical exercises and the appropriate hardware, the developer is guided by the theme. Both CAN architecture, as well as protocol management and topology are treated in detail. The participant will be able to develop both CAN hardware and software independently.

Content basics of CAN-Bus and CAN-Open network topology bus access CAN data telegram CAN error telegram error recognition and diagnostics signal coding bus coupling protocol controller CAN tranceiver application layer CAN Open objects CAN Open object library configuration device profile Design with SJA 1000 controller





Developer Training


Image Block Pool

Image Block 1 Image Block 2 Image Block n

ImagePacket 1

ImagePacket 1

ImagePacket 1

ImagePacket n

ImagePacket n

ImagePacket n... ... ......

ImagePacket 1

ImagePacket 2

ImagePacket n

Ethernet Frame Ethernet Frame Ethernet Frame

0 100 200 300 x * 200

Sample-Period[µsec]

Image Block 1

Packet Delay


Developer Training


Training „GigE Vision Entwicklung" This course teaches the basics of GigE Vision technology, GenICam configuration, and OpenCV image processing. The participant will be able to use a corresponding GigE Master Stack to configure both camera systems and to develop software for image processing independently.

Content Introduction into GigE Vision GigE Vision stack GigE Vision master Ethernet frame structure Analysis with WhireShark GigE Vision control protocol (GVCP) GVCP function groups GVCP registers GigE Vision stream protocol (GVSP) Realtime image processing packet and block management packet and block timing image formats image processing with OpenCV configuration with GenICam GigE error handling





Developer Training

SYBERA GmbH, Hohenzollernstr. 2, D-71088 Holzgerlingen, Tel: 07031-411781 (Fax: -744609) Seite 31

Dates and Prices

The general training conditions and the terms and conditions of SYBERA apply. The prices include all training materials as well as refreshments and lunch. For special promotions or special training offers separate prices and provisions apply. All prices plus VAT, price or date changes reserved. SYBERA GmbH, Hohenzollernstr. 2, D-71088 Holzgerlingen, Germany, Tel. ++49-7031-411-781 (Fax 744-609)

Date post:	16-Oct-2021
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Training Catalogue 2020 - SYBERA

Documents