Training Courses 2018 - leroy-somer.com · 30 June 2015 relating to the quality of ... - Perform a...

Training Courses 2018

Alternators & AVRs Electric Power Generation

EDITORIAL

The entire team of the Leroy-Somer Training Center is pleased to present its new 2018 training catalog.

Due to its business environment and the technological challenges it faces, our company is under constant pressure to update its products in order to assure its growth and longevity.

Training is what drives these changes, but just like other services, it needs to adapt.

Thanks to digitization, training should be able to adopt new teaching methods, still incorporating the concept of a return on investment, but without forgetting the basics.“Tell me and I forget. Teach me and I remember. Involve me and I learn.”

This famous quote by Benjamin Franklin sums up perfectly the spirit which inspires the training team at the Leroy-Somer Training Center:

Get the learner involved!

- We rely on trainers with huge experience in the field, who are inspired by a passion for passing on that knowledge.

- We invest in equipment that mimics real-life situations as closely as possible duringface-to-face training.

- We give learners autonomy during their training, by means of e-learning modules thatallow them to acquire the principles of operating and selecting our main product families.

- We give theme the tools to check how their knowledge is progressing.

As of 1st July, Leroy-Somer complies with the 6 regulatory criteria defined by decree no. 2015-790 of 30 June 2015 relating to the quality of professional continuous training activities. This law allows your organisation to take responsibility for training.

Dear customer, whether you are a technician in a design office, working for an installer or a service company, in charge of maintenance, commissioning, energy optimization, or if you are a sales office engineer in charge of defining or distributing our products, you will find training programmes in this catalogue which can, if necessary, be customized to your needs and conducted in our Training Center or on one of your sites.

You will find this catalogue on our website http://lrsm.co/training-epg-en along with the course timetable, which is updated on a regular basis.

We look forward to meeting you in our Training Center.Alain BONDOUX

Product Training Manager

FIT 300 - Vibration analysis and noise analysis on a rotating machine ............................................................. 6

ALT 1 - Alternators specification and selection .................................................................................................. 7

ALT 2 - Alternators specification and selection .................................................................................................. 8

AVR 1 - Analog AVRs for low voltage alternators ............................................................................................... 9

AVR 2 - Digital AVR for low voltage alternators D510C .................................................................................... 10

AVR 3 - Analog AVRs for medium & high voltage alternators R600 ................................................................. 11

AVR 4 - Digital AVRs for medium & high voltage alternators D600 .................................................................. 12

AVR 5 - Integrated generator set AVR/controller ControlReg 200/200P ............................................................... 13

AVR 6 - Digital AVR for low, medium & high voltage alternators D700 ............................................................. 14

ALT 3 - Alternators maintenance ...................................................................................................................... 15

Customized training ......................................................................................................................................... 16

Practical information and registration .............................................................................................................. 17

General conditions of training .......................................................................................................................... 18

Table of content

SELECTION

OPERATION & MAINTENANCE

PRACTICAL INFORMATION

FIT 300

AVR 1

ALT 1

AVR 2

ALT 2

AVR 3

AVR 4

AVR 5

AVR 6

ALT 3

MAINTENANCE

Training module selection flowchart

KNOW HOW TO SELECT, DEFINE

KNOW HOW TO OPERATE, COMMISSION

Knowledgeelectrical engineering

Knowledgeelectrical basics and

electrical risks habilitation

Knowledgeelectrical engineering& electrical basics and

electrical risks habilitation

6

SELE

CTI

ON

Vibration analysis and noise analysis on a rotating machineFIT 300Level: I

After the training, the trainees will be able to:

- Identify the terms of the vibration analysis and their applications- Analyse a specifications sheet specific to noise - vibrations- Determine a design process taking vibration constraints into consideration- Perform a pre-analysis based on a vibration measurement report

OBJECTIVES

Price: €850 excl. tax/traineeDuration: 2 daysAttendance*: 3 to 4 participantsPrerequisites: None Location: Angoulême, FranceDistribution: 30% practical - 70% theoretical

AUDIENCE

- Design office technician- Maintenance technician

CONTENT

- Definitions, measurement units, measurement points and associated standards in vibration

- Spectral analysis, definitions, examples, settings- Diagnostic process from spectrums in vibration and noise- Resonance: definition, measurement and calculation - Definitions, measurement units, measurement points and associated standards in acoustics

- Design approach: methodology, acceptance criteria, global process

- Case studies on application with motor / alternator

RELATED PRODUCTS

- Alternators - Electric motors

*The Course is confirmed once at least 3 inter and/or intra company participants have signed up.

Training booking and information:http://lrsm.co/training-epg-en

7

SELE

CTI

ON

Alternators specification and selectionALT 1Level: I


- Understand the operation of an alternator (mechanical constructions and configurations)- Identify the excitation and regulation principles of the alternators- Select an alternator

OBJECTIVES

Price: €875 excl. tax/traineeDuration: 2 daysAttendance*: 4 to 8 participantsPrerequisites: None Location: Angoulême, France Distribution: 100% theoretical

AUDIENCE

- Design office technician- Sales engineer- Genset manufacturer

CONTENT

- Reminders on electricity basics in alternators- Excitation systems- Regulation modes and parallel running- Basics of electrical engineering applied to alternators - Main mechanical aspects: construction (IM), protection (IP), cooling (IC)

- Presentation of the LS range: design and manufacturing

RELATED PRODUCTS

- Synchronous alternators of the Leroy-Somer range



8

SELE

CTI

ON

Alternators specification and selectionALT 2Level: Advanced


- Understand the excitation and regulation principles of the alternators- Identify the details of the electrical parameters and mechanical configurations - Select an alternator according to a specifications sheet

OBJECTIVES

Price: €1315 excl. tax/traineeDuration: 3 daysAttendance*: 4 to 8 participantsPrerequisites: Knowledge in electrical engineering (basics)Location: Angoulême, FranceDistribution: 30% practical -70% theoretical

AUDIENCE

- Design office technician- Sales engineer- Genset manufacturer

CONTENT

- Reminder on the basics of the different excitation systems- Presentation of the operating modes and parallel running- Discovery of help options: LAM, U/F, equalisation, AREP, ...- Presentation of electrical engineering basics about alternators (insulation, temperature rises, harmonics, neutral point, reactance, PQ diagram, IEEE diagram, curves, etc)

- Presentation of mechanical aspects: construction (IM),protection (IP), cooling (IC), main bearings, terminal box

- Study of real-world cases based on trainee experiences

RELATED PRODUCTS

- Synchronous alternators of the Leroy-Somer range



9

OPE

RAT

ION

Analog AVRs for low voltage alternatorsAVR 1Level: I

OBJECTIVES

AUDIENCE

- Maintenance technician- Design office technician- After-sales department technician- User/Operator- Genset manufacturer- Service Center

CONTENT

- Detail of the excitation systems- Presentation of the AVR global range- Presentation, parameter details, connections of the AVR- Presentation of AVRs and additional modules- Practical cases of use: voltage regulation, power factor, KVAr, stability parameters

RELATED PRODUCTS

- AVRs: R220, R250, R438, R450, R449, ...- Additional modules: R726, R731

Price: €980 excl. tax/traineeDuration: 2 daysAttendance*: 2 to 4 participantsPrerequisites: ALT1 recommended + Knowledge electrical basics and electrical risks habilitationLocation: Angoulême, France Distribution: 50% practical - 50% theoretical


- Connect AVRs (AVR range for low voltage alternators)- Adjust analog AVRs - Diagnose incorrect AVR operation



10

OPE

RAT

ION

Digital AVR for low voltage alternators D510CAVR 2Level: I


- Connect the digital AVR for low voltage range D510C- Adjust the digital AVR - Diagnose incorrect AVR operation- Use the Easyreg© software

OBJECTIVES

Price: €980 excl. tax/traineeDuration: 2 daysAttendance*: 2 to 4 participantsPrerequisites: ALT1 recommended + Knowledge electrical basics and electrical risks habilitationLocation: Angoulême or Orléans, FranceDistribution: 50% practical - 50% theoretical

AUDIENCE


CONTENT

- Details of the excitation systems- Presentation, parameter details, connections of the D510C - Practical cases of use: voltage regulation, power factor, KVAr, stability parameters and manual mode

RELATED PRODUCTS

- Digital AVR D510C



11

OPE

RAT

ION

Analog AVRs for medium & high voltage alternators R600AVR 3Level: I

OBJECTIVES

AUDIENCE


CONTENT

- Details of the excitation systems- Presentation of the analog range- Parameters and connections of the AVR- Practical cases of use: voltage regulation, power factor, KVAr, stability parameters

RELATED PRODUCTS

- Analog AVRs of the R600 range (R610 and R630) for medium & high voltage alternators

Price: €980 excl. tax/traineeDuration: 2 daysAttendance*: 2 to 4 participantsPrerequisites: ALT1 recommended + Knowledge electrical basics and electrical risks habilitationLocation: Orléans, FranceDistribution: 50% practical - 50% theoretical


- Connect analog AVRs for medium & high voltage R610 and R630- Adjust analog AVRs - Diagnose incorrect AVR operation



12

OPE

RAT

ION

Digital AVRs for medium & high voltage alternators D600AVR 4Level: I


- Connect and adjust digital AVRs for medium & high voltage D610 and D630- Configure digital AVRs with SUPD600- Diagnose incorrect AVR operation

OBJECTIVES

Price: €980 excl. tax/traineeDuration: 2 daysAttendance*: 2 to 4 participantsPrerequisites: ALT1 recommended + Knowledge electrical basics and electrical risks habilitationLocation: Orléans, FranceDistribution: 50% practical - 50% theoretical

AUDIENCE


CONTENT

- Details of the excitation systems- Presentation of the digital range- Parameters and connections of the AVR- Operation of the SUPD600 software- Practical cases of use: voltage regulation, power factor,KVAr, stability parameters

RELATED PRODUCTS

- Digital AVRs of the D600 range (D610 and D630) for medium & high voltage alternators



13

OPE

RAT

ION

Integrated generator set AVR/controller ControlReg 200/200PAVR 5Level: I

AUDIENCE

- Service Center- Genset manufacturer- User

CONTENT

- Reminder on electrical magnitudes- Basics on regulation- Basic functions on communication with motor (CAN)- Details on the LS Utility Software- Details on configuring ControlReg 200/200P- Use on generator set

RELATED PRODUCTS

- Low Voltage Shunt excitation range alternator (excitation current below 4 A)- ControlReg 200

Price: €400 excl. tax/traineeDuration: 1 dayAttendance*: 4 participantsPrerequisites: Knowledgeelectrical engineering and operating principle of the alternatorLocation: Angoulême, FranceDistribution: 50% practical - 50% theoretical


- Configure the ControlReg 200/200P- Prepare starting up and installation on site- Understand the Utility Software- Run a fault diagnostic

OBJECTIVES



14

OPE

RAT

ION



Digital AVR for low, medium & high voltage alternators D700AVR 6Level: I


- Connect and adjust digital AVR for low, medium & high voltage D700- Configure digital AVR using its EasyReg Advanced software- Diagnose incorrect AVR operation

OBJECTIVES

Price: €980 excl. tax/traineeDuration: 2 daysAttendance*: 2 to 4 participantsPrerequisites: ALT1 recommended + Knowledge electrical basics and electrical risks habilitationLocation: Angoulême or Orléans, FranceDistribution: 50% practical - 50% theoretical

AUDIENCE


CONTENT

- Details of the excitation systems- Presentation of the digital range- Parameters and connections of the AVR- Operation of the software- Practical cases of use: voltage regulation, power factor,KVAr, stability parameters

RELATED PRODUCTS

- Digital AVR D700 for low, medium & high voltage alternators

15

MA

INTE

NA

NC

E

Alternators maintenanceALT 3

AUDIENCE

- Maintenance technician- After-sales department technician- Service Center- Design office technician- User, Operator- Genset manufacturer

CONTENT

A flexible program adapted to your needs, focused on maintenance of alternators in our workshops, for example:- Maintenance program recommended- Taking measurements- Dismantling/reassembling alternators- Using manuals, etc

RELATED PRODUCTS

- Type of alternator to be defined according to your request

CUSTOMIZED TRAINING

For more information (objectives, program, price, duration, attendance, location)Contact us on +33 (0)5 45 94 59 03


16

PRA

CTI

CA

L IN

FOR

MAT

ION

Customized training

We can design and organize custom trainings on the definition, selection, operation and maintenance of alternators and AVRs products in order to meet your specific needs, whatever the context: new hires, special projects, reinforcement on core competencies…

The training can also focus on specific themes including:

- Grid Code- Marine specifications- Oil & Gas specifications- Hydro specifications- Maintenance optimization

For those tailored trainings we will work in close relationship with you to answer your needs and bring you the very best of our expertise and know-how.

Those tailored trainings can be held at the Training Center, at one of our factories or on your premises, for groups up to 6 people.

17

PRA

CTI

CA

L IN

FOR

MAT

ION

Practical information and registration

POITIERS

BORDEAUXCOGNACSAINTES

LA ROCHELLE

ANGOULÊME

LIMOGES

Zone des Montagnes

CHAMPNIERS

N10

N10

N141

D910

Exit for Angoulême Nord Espace

Commercial et Hôtelier

Exit for Espace Commercial

et Hôtelier

Exit for LIMOGES then Angoulême Nord

Espace Commercial et Hôtelier

Training Centre

Leroy-Somer Training Center39 rue des Figuiers - 16430 Champniers

GPS coordinates N: 45° 42,54.004’ - E: 0° 11,27.852’

Close to the Training CenterIBIS*Espace Hôtelier - 46 rue des Meneaux - 16430 CHAMPNIERSTel. +33 (0)5 45 69 16 16IBIS STYLES*Espace Hôtelier - 122 rue des Meneaux - 16430 CHAMPNIERSTel. +33 (0)5 45 68 53 22IBIS BUDGET*Espace Hôtelier - 122 rue des Meneaux - 16430 CHAMPNIERSTel. +33 (0)5 45 90 38 80FASTHOTELRN 10 - 16160 GOND PONTOUVRE - Tel. +33 (0)5 45 69 23 00KYRIAD*RN 10 - 16430 CHAMPNIERS - Tel. +33 (0)5 45 68 03 22FORMULE 1RN 10 - 16430 CHAMPNIERS - Tel. +33 (0)8 91 70 53 52

Close to the StationTERMINUS1 Place de la gare - 16000 ANGOULEMETel. +33 (0)5 45 92 39 00

Town CenterMERCURE*Place des Halles - 16000 ANGOULÊMETel. +33 (0)5 45 95 47 95LE PALAIS*Place F. Louvel - 16000 ANGOULEMETel. +33 (0)5 45 92 54 11EUROPEEN*1 place Gérard Pérot - 16000 ANGOULEMETel. +33 (0)5 45 92 06 42

Booking a training session

By phone: +33 (0)5 45 94 59 03 / Fax: +33 (0)5 45 94 59 44 By email: [email protected] or [email protected] the website: http://lrsm.co/training-epg-en

As of 1st July, Leroy-Somer complies with the 6 regulatory criteria defined by decree no. 2015-790 of 30 June 2015 relating to the quality of continuing vocational training activities. This law allows your financial organisation to take responsibility for training.

*Special rates have been agreed for anyone attending training courses at the Leroy-Somer CFE

18

PRA

CTI

CA

L IN

FOR

MAT

ION

General conditions of trainingGeneral Terms of Sale – Training Services

I- SCOPE OF APPLICATION

The Moteurs Leroy-Somer training centre (referred to hereinafter as the "Centre") designs, offers and conducts intercompany and intracompany training courses with a classroom-based learning or E- Learning format. The Centre also offers companies audit and operational advisory services. These services are collectively referred to as the "Centre's Service Offer".

II- PURPOSEThese General Terms of Sale of Training Services (referred to hereinafter as the "Terms of Sale") apply to all the Centre's Service Offers pertaining to orders placed with the Centre by any professional customer (referred to hereinafter as the "Customer"). By placing an order, the Customer fully and unreservedly accepts these Terms of Sale. The Customer acknowledges that he has received sufficient information and advice from the Centre to be able to form a decision as to whether the Service Offer meets his needs.

III- TRAINING SERVICES

1- Enrolment on any training course will only be recorded after theCentre has received a signed training agreement. The Centre willprocess enrolment applications in their order of receipt until the course is full. When a training course is intended for accredited electricians,the trainees must provide proof of accreditation before the start of thecourse in order to be able to work on live electrical equipment. TheCentre reserves the right to prohibit any trainee who has failed to prove accreditation from working on live electrical equipment; theCentre will not accept liability under any circumstances, in particularfor any physical accident. 2- For each training course a training agreement will be sent induplicate, which must be signed and returned to the Centre. TheCustomer will receive an attendance certificate on completion of thetraining course. The Centre reserves the right to modify the contentof a training course at any time without advance notice, in which case no compensation will be payable.3- When a training course is to be covered by a professional trainingfunding body (organisme paritaire collecteuragréé), the Customermust apply for funding before the start of the course andconfirmation of funding must be enclosed with the training agreement.If a course is partially funded, the Customer will be responsible forpaying the balance. If confirmation of funding is not received by thetraining course start date, the Centre will charge the Customer the fullamount.4- Postponement by the Centre. If an insufficient number of traineessign up for a course, the Centre reserves the right to postpone the course before the start date, in which case no compensation will bepayable. Cancellation or postponement of training by the Customer: If theCustomer cancels or postpones a scheduled training course he mustcompensate the Centre on the following basis: i) postponement or cancellation more than 30 days before the start date: no compensation; ii) postponement or cancellation within 30 days and more than 15days before the start date: 30% of the cost of the training will becharged; iii) postponement or cancellation within 15 days of the startdate: the Customer will be charged 70% of the cost of the training.

IV- ORDERS

Invoices are payable cash by bank draft or truncated bill of exchange, on receipt and within 30 (thirty) days of the end of the month in which the invoice was issued.A formal demand for payment will be sent in the event of non-payment

of any invoice on its due date; if payment is still not forthcoming the Centre will charge: - a late-payment penalty calculated from the due date on the basis ofthe total amount owed including VAT (if VAT is payable),- compensation for collection costs of at least €40, and all currentservices will be suspended. The late-payment penalty will correspond to the most recent EuropeanCentral Bank refinancing rate plus 10 points.If legal proceedings are necessary to collect payment, the outstandingamount will be increased by 15% (fifteen percent) or by at least €500(five hundred euros) excluding VAT, plus any applicable taxes.

VI- CONFIDENTIALITY

Both parties undertake to treat as confidential all technical, commercial, financial and other information received from the otherparty by word-of-mouth, in writing or by any other means ofcommunication during the negotiation and/or fulfillment of any order.This confidentiality obligation will apply throughout the fulfilment of the order and for a further 5 (five) years after its expiry or termination, irrespective of the reason.

VII- INTELLECTUAL PROPERTY

The Centre is the owner of the intellectual property rights to the training courses it offers. All the materials and content used by the Centre, irrespective of their form, shall remain the sole property of the Centre. The Customer is not entitled to use, reproduce, transform, or exploit the training materials within or outside of its company without the Centre's prior written agreement. The Customer also undertakes not to duplicate the training by dispensing it to another person, unless expressly authorized to do so.

VIII- DATA PROCESSING

Moteurs Leroy-Somer may process your personal data for the purposes of training. The data collected is necessary for this processing and will be used by Moteurs Leroy-Somer, its service providers and its subcontractors. The data will be retained for 6 years from the date on which it is collected. This processing is based on a legitimate interest of Moteurs Leroy-Somer to conduct training. In accordance with applicable law, you have the right to examine, to access, to have corrected, to have erased, to restrict and/or to object to the processing of your personal data; as well as the right to the portability of your personal data and the right to give instructions on what happens to your personal data after your death by sending an email to [email protected] accompanied by a document verifying your identity.

IX- DISPUTES

THIS CONTRACT IS GOVERNED BY FRENCH LAW.

IF THE PARTIES FAIL TO REACH AN AMICABLE AGREEMENT, AND NOTWITHSTANDING ANY CLAUSE TO THE CONTRARY, ANY DISPUTE RELATING TO THE INTERPRETATION AND/OR FULFILMENT OF AN ORDER SHALL BE REFERRED TO THE COURTS WITH JURISDICTION IN ANGOULEME(FRANCE), NOTWITHSTANDING THE INTRODUCTION OF THIRD PARTIES OR THE EXISTENCE OF MULTIPLE DEFENDANTS.

The Centre will detail its training offer and prices in a Service Offer, which will remain valid for one month after receipt of the Offer. On receipt of the order or signature of the order form included in the Offer,the Centre will draw up a training agreement.

V- PRICE-PAYMENT

Prices are stated exclusive of VAT and are valid for the term of theOffer or until a new catalogue is issued.If training takes place outside the Centre, all associated costs such astravel expenses incurred by consultants and trainers, room rental costs,the cost of documentation and of and the rental of training equipment(such as video recorders), etc. will be charged in addition.

CL /AB /10.04.2018v1

www.leroy-somer.com/epg

- 2018.04 / f5339 en

© Nidec 2017. The information contained in this brochure is for guidance only and does not form part of any contract. The accuracy cannot be guaranteed as Nidec have an ongoing process of development and reserve the right to change the specification of their products without notice.

Moteurs Leroy-Somer SAS. Siège : Bd Marcellin Leroy, CS 10015, 16915 Angoulême Cedex 9, France. Capital social : 65 800 512 €, RCS Angoulême 338 567 258.

Linkedin.com/company/Leroy-SomerTwitter.com/Leroy_Somer_enFacebook.com/LeroySomer.Nidec.enYouTube.com/LeroySomerOfficiel

Date post:	23-Apr-2018
Category:	Documents
Upload:	vanthuy
View:	214 times
Download:	1 times

Training Courses 2018 - leroy-somer.com · 30 June 2015 relating to the quality of ... - Perform a...

Documents