Date post: | 14-Apr-2018 |
Category: |
Documents |
Upload: | manisha-tomar |
View: | 260 times |
Download: | 3 times |
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 1/18
Summer Training Report On
Manufactur ing of Camshaft & Valve Tappet
Presented By:-
PRITHVI RAJ SONI
SOURABH PUROHIT
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 2/18
Company Profile
• MAHLE is leading global development partner for the automotive
and engine industry.
• MAHLE offers unique systems competence in the combustion engine
and engine peripherals.
• MAHLE has a local presence in all major world markets. In 2014,
some 65,000 employees at 140 production locations are expected to
generate sales of around ten billion euros.
•At ten major research and development centers in Germany, GreatBritain, the USA, Brazil, Japan, China, and India, more than 4,000
development engineers and technicians are working on forward-
looking concepts, products, and systems.
• MAHLE Engine components Pvt. Lmt. Is located in Pithampur
district, near indore
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 3/18
INTRODUCTION
CAMSHAFT
• Camshaft is engine component which converts rotatory motion
into reciprocatory motion.
• A camshaft is a shaft to which a cam is fastened or of which a
cam forms an integral part
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 4/18
VALVE TAPPET Mushroom Head Cylindrical
• A tappet is a projection which imparts a linear motion to
some other component within a mechanism.
• The tappet is that part, also termed a cam follower that
runs on the camshaft and is made to move vertically by
the action of the rotating cam.
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 5/18
VARIOUS DEPARTMENTS FOR MANUFACTURINGPROCESSES OF CAMSHAFT & VALVE TAPPET
• Green Sand Foundry
• Shell sand Foundry
• Machining
• Inspection & Quality Control
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 6/18
GREEN SAND FOUNDRY
• Green sand casting is a metal casting process characterized
by using sand as the mold material.
• Sand is moistened, typically with water, but sometimes with
other substances, to develop strength and plasticity.
• "green sand" is not a type of sand on its own, but is rather a
mixture of silica sand (SiO2), or chromite sand (FeCr2O), or
zircon sand (ZrSiO4), 75 to 85%, or olivine, or staurolite, or
graphite.
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 7/18
There are six steps in this process:
1. Place a pattern in sand to create a mold.
2. Incorporate the pattern and sand in a gating system.
3. Remove the pattern.
4. Fill the mold cavity with molten metal.
5. Allow the metal to cool.
6. Break away the sand mold and remove the casting.
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 8/18
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 9/18
SHELL SAND FOUNDRY
• Shell mold casting, is an expendable mold casting process that
uses a resin covered sand to form the mold.
• As compared to sand casting, this process has better dimensional
accuracy, a higher productivity rate, and lower labor
requirements.
• Shell mold casting allows the use of both ferrous and non-
ferrous metals, most commonly using cast iron, carbon steel,
alloy steel, stainless steel, aluminum alloys, and copper alloys.
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 10/18
The shell mold casting process consists of the following steps:
1. Pattern creation - A two-piece metal pattern is created in the shape of the
desired part.
2. Mold creation - First, each pattern half is heated to 175-370°C (350-700°F)
and coated with a lubricant to facilitate removal. The heated pattern partially
cures the mixture, which now forms a shell around the pattern.
3. Mold assembly - The two shell halves are joined together and securely
clamped to form the complete shell mold
4. Pouring - The mold is securely clamped together while the molten metal is
poured from a ladle into the gating system and fills the mold cavity.
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 11/18
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 12/18
MACHINING PROCESSES
Following machine tools are used in maching of valve tappet
1. Pre-grinder (plunge an through feed)
2. Hardness tester
3. Multi Spindle m/c & CNC m/c
4. Heat treatment
5. Lapping m/c
6. Crack testing m/c
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 13/18
CENTRELESS GRINDING MACHINE
• The centreless grinder is a type of grinding machine used to shape the
outside of an object.
•
Centerless grinding is a form of grinding where a regulating wheel positioned on the opposite side of the object to the grinding wheel.
• A work rest keeps the object at the appropriate height but has no
bearing on its rotary speed.
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 14/18
MULTI SPINDLE MACHINE
• It can provide the various types of machining such as boring,
turning, chamfering, threading, grooving, and drilling by moving
the work pieces between 6 or 8 stations simultaneously.
• Generally Multi Spindle Automatic Lathe can provide approx. 4
-5 times of machining speed comparing to the Single Spindle
Lathe
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 15/18
LAPPING MACHINE
• Lapping is a superfinishing machining process.
• Two surfaces are rubbed together with an abrasive between them, by
hand movement or by way of a machine.
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 16/18
HEAT TREATMENT
Heat treatment is to increase service life of a product by increasing its
strength or hardness, or prepare the material for improved
manufacturability.
Heat Treatment Processes
Hardening
Annealing
Normalizing
Tempering
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 17/18
FINAL INSPECTION
NITRIDIN TAPPET
VISUAL INSPECTION- I
DIMENSIONAL INSPECTION
VISUAL INSPECTION- II
OIL PACKING
7/27/2019 TRAINING Manufacturing of Camshaft & Valve TappetPRESENTATION.ppt
http://slidepdf.com/reader/full/training-manufacturing-of-camshaft-valve-tappetpresentationppt 18/18