Training Program Guide 2013

Automotive Equipment Training Programme 2013

2

Bosch has always been in step with technology. Which is why our training methods have undergone constant reformation. And just as technology grows, our training too becomes more comprehensive and reaches a larger audience.

Tran

spor

tC

omm

unic

atio

nIn

fras

truc

ture

Tech

nolo

gyTr

aini

ng

03

“We are all living in a time of rapid change. Change is all around us. Our country has changed, so has our society, technology has transformed our lives and with that our thinking too. It is imperative then that an organisation embraces change as well – in its processes, its systems, in ways of doing business.”

Dear Business Partner,

The world we grew up in is changing by the day, and we are feeling this change in every sphere of our lives. Smart phones and e-mails have replaced trunk calls and inland letters. A few hours of television everyday on a single national channel has changed to hundreds of 24-hour cable channels. DVDs – very recently thought as a breakthrough and over improvement of video cassettes and VCDs – are already being replaced by Blu-ray discs. So too has automotive technology evolved, and to keep pace with this change, our training systems, methodologies and course content have all evolved.

From a few training centres, the Bosch Training network now spans the country. Online training is complementing classroom training, and making it accessible to people everywhere. Mobile Training Centres from Bosch are taking automotive training to places and to people who would otherwise find it difficult to learn. A greater focus on diesel technologies, notably CRDi, and cutting-edge diagnostic equipment is helping us keep abreast of constantly-evolving automotive technology and meet increasingly demanding customer needs, with cost-effective training solutions even in a difficult economic scenario. It is the simple philosophy of helping our partners stay ahead of the curve that is driving these new training initiatives at Bosch, built on the belief that ‘Knowledge is power’. By arming ourselves with the right knowledge, the right training and raising the level of automotive intelligence, we can together deliver better service, which in turn will lead to more satisfied customers and ultimately to increased business and growth.

So as we begin a new year, let us do so with a sense of increased optimism and a ‘can do’ spirit that will ensure that we have the edge in this competitive sector of the automotive industry. Let the Bosch Training Programme 2013 help deliver nothing but the very best in service to our customers and take our success to the next level.

Wishing you a very prosperous and profitable 2013,

Yours sincerely,

S. Muralidharan Regional President Automotive Aftermarket

T.S. Ananda KumarSr. General ManagerTechnical Service & SupportAutomotive Aftermarket

04

05

Courses – Bosch Training Centre 07

Courses on Diesel Fuel Injection Equipment 07

Course on Auto Electrical 09

Seminar for OE Customers 09

Courses for Institutional Customers 09

Courses on Workshop & Test Equipment 10

Course on Bosch Wheel Aligner 10

Course on Bosch Wheel Balancer, Tyre Changer and Nitrogen Tyre Inflator 12

Course on Bosch Air Conditioning Machine 12

Course on Vehicle Maintenance & Systems 12

Specialised Courses on Systems 13

Course for Bosch System Technicians 13

Courses for Sales/ Service Personnel 13

Courses for Educational Institutes 14

Course for Trainers 14

Course for Students 14

Course for New Entrants (AA) 14

Course for Employees from Bosch Group (India) 14

Courses – Regional/ Local Training Centres (RTC/ LTC) 15

Courses on Diesel Fuel Injection 15

Course on Gasoline Fuel Injection 16

Course on Auto Electrical 16

Courses on Bosch Battery 16

Seminars – Techno-commercial 17

Courses for State Transport Undertakings 19

Courses for Sales Personnel 20

Course on 2-Wheeler Products 20

Courses on Workshop & Test Equipment 21

Course for Defence Personnel 21

Course for OE Customers 21

Courses for Students and Lecturers 22

Courses for Bosch Car Service (BCS) 24

Courses for Bosch Express Bike Service (EBS) 30

Training Centres 31

Accommodation and Transport Details 32

Bengaluru 32

North Region 33

South Region 37

East Region 41

West Region 44

Eligibility and Enrolment Procedure 48

Contents

06

07

Courses – Bosch Training Centre

Courses on Diesel Fuel Injection EquipmentCourse Code: EP - X

Duration: Ten days.

Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment with more hands-on training.

Participants: Fuel Injection Equipment Service Personnel, preferably Bosch Authorised Representatives.

Course Content: Working Principle, Repair and Testing of PE...A-type Multi-cylinder Fuel Injection Pump with RSV and RQV Governors, VE Distributor-type Fuel Injection Pump, Add-on Modules fitted on PE and VE Pumps, Injector, Injection Timer, Feed Pump and Filters, Injection Timing Setting on Diesel Engine, Safety and Housekeeping, Maintenance and Upkeep of Service Literature.

Place: BTC (Naganathapura, Bengaluru) (On request).

Course Code: EP - 4

Duration: Three days.

Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment.

Participants: Fuel Injection Equipment Service Personnel, preferably Bosch Authorised Representatives, Engineers/ Technicians from OEMs.

Course Content: Working Principle, Repair and Testing of VE Distributor-type Fuel Injection Pump with and without Manifold Pressure Compensator (LDA), Add-on Modules, Injectors, Filter and Injection Timing Setting on Diesel Engine fitted with VE Pump, Safety and Housekeeping, Maintenance and Upkeep of Service Literature.

Place: BTC (Naganathapura, Bengaluru).

Course Code: EP - P


Objective: To make participants competent with Heavy-duty Test Bench to carry out quality service on Diesel Fuel Injection Equipment.

Participants: Fuel Injection Equipment Service Personnel of Bosch Authorised Representatives equipped with Heavy-duty Test Bench.

Course Content: Working Principle, Repair and Testing of Bosch PE...P Fuel Injection Pump and RQV-K Governor, Bosch EDC Governor fitted on PE...P Fuel Injection Pumps, Safety and Housekeeping, Maintenance and Upkeep of Service Literature.


0808

Course Code: EDC - 1

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Bosch VE Fuel Injection Pumps with Electronic Diesel control (VP-37).

Participants: Personnel servicing Fuel Injection Equipment.

Course Content: Working Principle, Repair, Testing and Adjustment of Bosch VE Fuel InjectionPumps (VP 37), Safety and Housekeeping, Maintenance and Upkeep of Service Literature.


Course Code: EDC - 2

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Bosch VP-44 Fuel Injection Pumps.

Participants: Personnel servicing Fuel Injection Equipment, preferably from Bosch Authorised Representatives.

Course Content: Working Principle, Repair, Testing and Adjustment of Bosch VP-44 Fuel Injection Pumps on EPS 815 Test Bench, Safety and Housekeeping, Maintenance and Upkeep of Service Literature.


Course Code: CR - 1


Objective: To make participants competent in carrying out quality service on Common RailHigh-pressure Pumps and Injectors.

Participants: Technicians from BDS and OEMs equipped with EPS 815 and having experiencein handling all types of existing fuel injection systems.

Course Content: Structure, Function of Common Rail High-pressure Pumps and Injectors (CP1K, CP1H& CRI), Characteristics, Testing on the Pump Test Bench EPS 815 with KMA Measuring technique and Testing of Common Rail Injectors.


Course Code: CR - 2


Objective: To make participants competent in carrying out quality service on Common RailHigh-pressure Pumps and Injectors.

Participants: Technicians from BDS and OEMs equipped with EPS 815 and having experiencein handling all types of existing fuel injection systems.

Course Content: Structure, Function of Common Rail High-pressure Pumps and Injectors (CP3, CPN2.2, CB18 & CRIN), Characteristics, Testing on the Pump Test Bench EPS 815 with KMA Measuring technique and Testing of Common Rail Injectors.


Course Code: EPS

Duration: Two days.

Objective: The participants will be able to operate the EPS 815 Test Bench using theSoftware EPS 945/ 944.

Participants: New staff, existing and potential EPS 815 users. Personnel who have good experience in handling all types of fuel injection pumps and governors.

09

Course Content: Operation of Test Bench EPS 815 with KMA measuring technique.

f Programming of test protocol adjustment steps.

f Importing/ exporting data.

f In-line and Distributor Pump test equipment fitment.

f Basic pump adjustment.

f Vehicle Diagnosis (Diesel vehicle)


Course on Auto ElectricalCourse Code: AEL - 2


Objective: To make participants competent in carrying out quality service on Bosch Auto Electrical Products and Test Equipment.

Participants: Personnel handling Auto Electrical Equipment at Bosch Authorised Stockists/ Distributors/ Workshops.

Course Content: Working Principle, Repair and Testing of Bosch Auto Electrical Products and Respective Test Equipment.


Seminar for OE CustomersCourse Code: OES


Objective: To provide knowledge on Bosch Products and to inform participants about the latest developments in Bosch Products.

Participants: Managers/ Engineers of OEMs manufacturing Diesel Engines and Vehicles.

Course Content: Design, Working Principle, Test Procedures of Bosch Fuel Injection and Auto Electrical Equipment, Interaction with Bosch R&D, Quality and Service Departments.


Courses for Institutional CustomersCourse Code: RLY

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Fuel Injection Equipment.

Participants: Fuel Injection Equipment Service Personnel of Railways.

Course Content: Working Principle, Repair and Testing of PF-type Fuel Injection Pumps and Injectors used by Indian Railways, Safety and Housekeeping, Maintenance and Upkeep of Service Literature.


1010

Course Code: DEF - 2



Participants: Fuel Injection Equipment Service Personnel from Defence having minimum two years of on-the-job experience.

Course Content: Working Principle, Repair and Testing of PE...A Multi-cylinder Fuel Injection Pump with RSV and RQV Governors, Manifold Pressure Compensator fitted on PE Pumps, Injection Timing Lock on PE Pumps, Injectors, Injection Timers, Filters and Feed Pump, Injection Timing Setting on Diesel Engine, Working Principle, Repair and Testing of Distributor Type, Fuel Injection Pump Type – VE with and without Manifold Pressure Compensator (LDA), Add-on Modules, Injection Timing Setting on Diesel Engine fitted with VE Pump, Safety and Housekeeping, Maintenance and Upkeep of Service Literature.


11

Courses on Workshop & Test EquipmentCourse Code: WTE - 2


Objective: To help participants in carrying out Maintenance, Troubleshooting and Minor Repairs of Bosch Authorised Workshop and Test Equipment.

Participants: Personnel looking after the maintenance of Bosch Authorised Workshop and Test Equipment, TMSS.

Course Content: Operating Instructions, Maintenance, Troubleshooting Guidelines, Service and Minor Repairs of Auto Electrical and FIE Test Benches, BAT 121, Battery Load Testers, Battery Chargers, Tyre Changers, Wheel Balancers, ACS and all other diagnostic products of Bosch.


Course Code: MRS

Duration: Four days.

Objective: To help participants in carrying out AMC Activities, Troubleshooting and Minor Repairs of Bosch Authorised Workshop and Test Equipment.

Participants: Missionary Representatives looking after maintenance of Bosch Authorised Workshop and Test Equipment.

Course Content: AMC Activity, Operating Instructions, Maintenance, Troubleshooting Guidelines, Service and Minor Repairs of Auto Electrical and FIE Test Benches, ASC Equipment, BAT 121, Battery Chargers, Battery Load Testers, Tyre Changers, Wheel Aligners and other workshop equipment.


Course on Bosch Wheel AlignerCourse Code: WA

Duration: One day.

Objective: To make participants competent enough in carrying outquality service using Bosch Wheel Aligner.

Participants: PSDG, BTS, Wheel Aligner end customer

Course Content: 1. Fundamentals of Steering Geometry

2. Five basic alignment angles

3. Wheel alignment specifications. Steering axis inclination

4. Maintenance tips: Steering system, suspension, etc.

5. Product feature & operating principle of Bosch Wheel Aligner

6. Training on wheel alignment software

7. Practical on Wheel Alignment using Bosch Wheel Aligner

8. Wheel Aligner Maintenance tips, Dos & Don’ts

Place: BTC (Naganathapura, Bengaluru) and RTCs (On request).

1212

Course on Bosch Wheel Balancer, Tyre Changer and Nitrogen Tyre InflatorCourse Code: WB, TC, NTI

Duration: One day.

Objective: To make participants competent enough in carrying out quality service using Bosch Wheel Balancer, Tyre Changer & Nitrogen Tyre Inflator.

Particpants: PSDG, BTS, End customer

Course Content: 1. Basics of tyre (Construction, terminology)

2. Different types of tyres

3. Operating principle of Wheel Balancer, Tyre Changer, NTI & Knowledge on nitrogen

4. Effects of unbalanced wheel on steering system

5. User training on balancing the different types of wheels

6. User training on Tyre Changer, precautions to be followed while changing the tyres

7. User training on NTI 100

8. Maintenance tips, Dos & Don’ts: Wheel Balancer, Tyre Changer & NTI 100


Course on Bosch Air Conditioning MachineCourse Code: ACS

Duration: One day.

Objective: To make participants competent enough in carrying out quality service using Bosch ACS 600, ACS 650 machine.

Particpants: PSDG, BTS, End customer.

Course Content: 1. Basic working principle of car A/C system

2. Different A/C gases and its features

2. Knowledge on car A/C components system

3. Operating principle of Bosch ACS 6xx

4. User training on ACS 6xx

5. Maintenance tips, Dos & Don’ts: ACS 6xx

6. Maintenance tips on vehicle A/C system.


Course on Vehicle Maintenance & SystemsCourse Code: VMS

Duration: Five days.

Objective: To make the participants competent in carrying out quality service on Bosch Products fitted in vehicles.

Participants: Personnel at BCS Bosch Authorised Stockists/ Distributors/ Workshops offering Vehicle Service.

13

Course Content: Practicals on Removal and Fitment of Bosch Products on the Vehicles, using Test Equipment for Diagnosis and General Service and Maintenance Aspects.


Specialised Courses on SystemsCourse Code: GFI - 2

Duration: Two days.

Objective: To educate participants about newer technologies and products in Petrol Injection.

Participants: Bosch Territory Managers – Sales and Service, Bosch Authorised Distributors’ Field Representatives, Bosch Authorised Product Stockists and BCS (by invitation).

Course Content: Technology and Product Knowledge on Petrol Injection. Working of Petrol Engine, Carburetion Process, Single Point Fuel Injection, Multi-point Fuel Injection and Vehicle Diagnosis – Hardware and Software.


Course for Bosch System TechniciansCourse Code: BST

Duration: Two to five days (depending on the module).

Objective: To make the participants knowledgeable about Bosch Products, Equipment and Vehicle Systems as per the detailed course plan for System Technicians.

Participants: System Technician Trainees working with Bosch Authorised Workshops (by invitation).

Course Content: Working Principle, Repair and Testing of Bosch Products and Respective Test Equipment, Knowledge on Vehicles, New Technologies and Diagnostic Tools /Equipment.

Place: BTC (Naganathapura, Bengaluru), RTCs and LTCs.

Courses for Sales/ Service PersonnelCourse Code: TMSS


Objective: To make participants competent in handling sales and service activities pertaining to Bosch Products.

Participants: Bosch Territory Managers – Sales and Service (by invitation).

Course Content: Product-specific contents (will be mentioned in the invitation).


Course Code: TMSE


Objective: To make participants competent in handling service activities pertaining to new Bosch Products and Equipment.

Participants: Bosch Territory Managers – Service (by invitation).

Course Content: Product-specific contents (will be mentioned in the invitation).

Place: BTC (Naganathapura, Bengaluru) (on request, basic courses of two/ three days duration will be conducted for TMSS/ TMSE at RTCs on mutually agreeable dates).

1414

Courses for Educational InstitutesCourse for TrainersCourse Code: TTT


Objective: The ‘Train the Trainer programme’ enables participants to stay abreast with the latest technologies.

Participants: Trainers at educational institutes, OE customers and other institutional customers, Regional/ Local Trainers (by special invitation).

Course Content: New technologies in Diesel, Gasoline, Vehicle Diagnosis – Hardware and Software, Latest Product Launch, and Service and Training Concepts.


Course for StudentsCourse Code: NEI - 2


Objective: To educate participants about newer automotive technologies.

Participants: Final year students from technical educational institutes.

Course Content: Newer Technologies in Diesel and Petrol Injection and Vehicle Diagnosis – Hardware and Software.


Course for New Entrants (AA)Course Code: AAN


Objective: Product Knowledge on all AA products.

Participants: All newly joined AA employees.

Course Content: Overview and understanding of Diesel Fuel Injection Systems, Gasoline Systems, Diagnostic Equipment and Automotive Accessories of Bosch.


Course for Employees from Bosch Group (India)Course Code: RB-IND


Objective: To help participants understand the role of Systems in Automobiles.

Participants: Personnel employed with Bosch Group companies.

Course Content: Overview and understanding of various vehicle systems with focus on Bosch Automotive products.


15

Courses – Regional/ Local Training Centres (RTC/ LTC)

Courses on Diesel Fuel InjectionCourse Code: PE


Objective: To make the participants competent in carrying out quality service on Diesel Fuel Injection Equipment (PE Pumps).

Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Workshops and independent workshops handling Bosch Fuel Injection Equipment.

Course Content: Working Principle, Repair and Testing of PE Multi-cylinder Pumps fitted with RSV and RQV Governors, Injection Timer, Feed Pump and Filters, MPC unit and all other Add-on Modules, Removal and Fitment of FIE on the Vehicle and Setting of Fuel Injection Timing.

Place: RTCs/ LTCs.

Course Code: VE - 1

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment (VE Pumps).

Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Workshops and independent workshops handling Bosch FIE.

Course Content: Working Principle, Repair and Testing of VE Pumps fitted with Mechanical Governors. Filters, Removal and Fitment of FIE on the Vehicle and Setting of Fuel Injection Timing.

Place: RTCs/ LTCs.

Course Code: VE - 2

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment (VE Pumps with Add-on Modules).

Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Workshops and independent workshops handling Bosch Fuel Injection Equipment.

Course Content: Working Principle, Repair and Testing of VE Pumps with MPC and all other Add-on Modules. Filters, Removal and Fitment of FIE on the Vehicle and Setting of Fuel Injection Timing.

Place: RTCs/ LTCs.

1616

Course Code: PF

Duration: One day.


Participants: Fuel Injection Equipment Service Personnel, preferably Bosch Authorised Representatives, Engineers/ Technicians from OEMs.

Course Content: Working Principle, Repair and Testing of PF and PFR Fuel Injection Pumps, Injectors, Importance of BDC dimension and adjustment.

Place: RTCs.

Course Code: EDC

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Bosch VE Fuel Injection Pumps with Electronic Diesel Control (VP-37).

Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Representatives, Engineers/ Technicians from OEMs, equipped with EPS 611/ 620 + EDC Tools.

Course Content: Basics of EDC System, Working Principle, Repair, Testing and Adjustment of Bosch Distributor-type Fuel Injection Pump (VP-37) and Injectors.

Place: RTCs/ LTCs.

Course Code: VS

Duration: One day.

Objective: To make participants understand the importance of Injection Timing andcompetent in setting Injection Timing on Diesel Vehicles fitted with PE and VE-type Fuel Injection Pumps.

Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Representatives, Engineers/ Technicians from OEMs and Diesel Mechanics.

Course Content: Basic knowledge on FIE products, Setting Injection Timing on Diesel Vehiclesfitted with PE and VE-type Fuel Injection Pumps, General Maintenance Tips and Warranty Terms.

Place: RTCs/ LTCs.

Course Code: PE - 1

Duration: Two days (on request).

Objective: To make participants equipped with Heavy-Duty Test Bench competent to carry out quality service on Fuel Injection Equipment.

Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Representatives, equipped with Heavy-Duty Test Bench EPS 611/ 620.

Course Content: Working Principle, Repair and Testing of Bosch PE...P-type Fuel Injection Pumps with RQV-K Governor and Injectors.

Place: RTCs(on request)/ LTCs.

17

Course on Gasoline Fuel InjectionCourse Code: GFI - 1

Duration: One day.

Objective: To educate participants about newer technologies in Gasoline Systems.

Participants: Bosch Territory Managers – Sales and Service, Bosch Authorised Distributors’ Field Representatives, Bosch Authorised Product Stockists, BCS, etc. (by invitation).

Course Content: Working of Gasoline Engines and Working Principle of Multi-Point Fuel Injection System and Vehicle Diagnostics.

Place: RTCs/ LTCs.

Course on Auto ElectricalCourse Code: AEL - 1

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Bosch Auto Electrical Products.

Participants: Auto Electricians working in Bosch Authorised Workshops.

Course Content: Working Principle, Repair and Testing of Bosch Auto Electrical Products and Respective Test Equipment. Removal and fitment of Alternators/ Starter Motors on Vehicle.

Place: RTCs/ LTCs.

Courses on Bosch BatteryCourse Code: BB

Duration: One day.

Objective: To make participants competent in selling Bosch Batteries effectively andhandling warranty.

Participants: Bosch Authorised Distributors, Stockists, Dealers and Workshop Personnel handling battery sales.

Course Content: Construction and Working Principle, Features, Advantages and Benefits, Product Range, Charging, Testing, Using BAT 121, Competitors’ Information, Opportunity Areas, Sales Arguments, Effective Campaigning and Warranty Handling.

Place: RTCs/ LTCs.

Course Code: VEH

Duration: One day.

Objective: To provide basic knowledge on Vehicle Systems.

Participants: Students from Polytechnics, Newly appointed Technicians employed with Bosch Authorised Representatives.

Course Content: Diesel Engine Basics, Fuel Injection System Basics and other Vehicular Systems.

Place: RTCs/ LTCs.

1818

Seminars – Techno-commercialCourse Code: BWF

Duration: One day.

Objective: To make Bosch Authorised Workshop Foremen competent in carrying out quality service on Bosch FIE and AE Products, thus ensuring customer satisfaction.

Participants: Foremen working in Bosch Authorised Workshops.

Course Content: Advanced knowledge on all Bosch Products, FIE, AE and Automotive Accessories, Warranty Administration, Attending Customers, Safety and Housekeeping, Troubleshooting of Vehicles, Effective Field Campaigning and Tips on Developing the Service Business.

Place: RTCs.

Course Code: OECD

Duration: One day.

Objective: To provide knowledge on Bosch Products and Marketing Policies.

Participants: Works Managers and Technicians working with OECDs.

Course Content: Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, their Quality, Features, Schemes and Warranty Terms.

Place: RTCs/ LTCs.

Course Code: FO

Duration: One day.

Objective: To provide knowledge on Bosch Products.

Participants: Proprietors, Partners and Technicians from Fleet Operators.

Course Content: Basic knowledge on Bosch Products, Maintenance Aspects, their Quality, Features and Warranty Terms.

Place: RTCs/ LTCs.

Course Code: IE

Duration: One day.


Participants: Electricians having their own garages.

Course Content: Basic knowledge on Bosch Auto Electrical Products, Maintenance Aspects, their Quality, Features and Warranty Terms.

Place: RTCs/ LTCs.

19

Course Code: CSM

Duration: One/ Two days.

Objective: To make Bosch Authorised Workshop Counter Salesmen competent in attending customers profitably and ensuring customer satisfaction.

Participants: Counter Salesmen working in Bosch Authorised Workshops.

Course Content: Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, Warranty Administration, Attending Customers, Effective Field Campaigning and Tips on Developing the Service Business.

Place: RTCs/ LTCs.

Course Code: PMW

Duration: One day.

Objective: To provide knowledge on latest products, Test and Diagnostic Equipment.

Participants: Proprietors of Bosch Authorised Workshops.

Course Content: Information on Latest Products, their Features, Advantages and Benefits, Test and Diagnostic Equipment required for the Workshop.

Place: RTCs (On request).

Course Code: CRO

Duration: One day (on request).

Objective: To provide basic knowledge on all Bosch Products, Test and Diagnostic Equipment, Handling, Storage and Shelf Life.

Participants: Customer Relations Officers at various Sales Offices, Personnel employed with C&F Agents.

Course Content: Information on all Bosch Products, their Applications and Usage, Test and Diagnostic Equipment used by customers.

Place: RTCs (On request).

2020

Courses for State Transport UndertakingsCourse Code: STU - 1

Duration: Two days.


Participants: Technicians working with State Transport Undertakings and other Government Departments.

Course Content: Basic knowledge of Bosch Products, Maintenance Aspects, their Quality, Features and Warranty Terms.

Place: RTCs/ LTCs.

Course Code: STU - 2

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment, Auto Electrical and other Bosch Products.

Participants: Nominated Personnel from State Transport Undertakings.

Course Content: Working Principle, Repair and Testing of PE Multi-cylinder Pumps, Alternators, Starter Motors and other Bosch Automotive Accessories.

Place: RTCs/ LTCs.

Course Code: WTY

Duration: One day.

Objective: To make participants competent in handling Warranty Issues.

Participants: Bosch Authorised Workshops, Bosch Authorised Distributors’ Field Representatives, Bosch Authorised Product Stockists, BCS, etc.

Course Content: Manufacturing codes, Warranty Terms and Procedures.

Place: RTCs/ LTCs.

21

Courses for Sales PersonnelCourse Code: PFR - 4W


Objective: To make participants competent in handling Bosch Products and relatedmarket issues.

Participants: Field Representatives working with Bosch Authorised Network.

Course Content: Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, their Quality, Features, Customer Service Issues and Warranty Administration.

Place: RTCs/ LTCs.

Course Code: BS

Duration: One day.

Objective: To make participants competent in handling Bosch Products and relatedmarket issues.

Participants: Bosch Authorised Stockists, Proprietors/ Partners.

Course Content: Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, their Quality, Features and Schemes, Selling Skills, Spare Parts Inventory Planning, Customer Service Issues and Warranty Administration.

Place: RTCs/ LTCs (On request).

Course on 2-Wheeler ProductsCourse Code: PFR - 2W

Duration: One day.

Objective: To make the participants competent in handling the Bosch 2-wheeler Product Range and related issues in the market.

Participants: Bosch Authorised 2-wheeler Distributors, Proprietors/ Partners.

Course Content: Basic Knowledge on the Bosch 2-wheeler Product Range, Quality, Features, Customer Service Issues and Warranty Administration.

Place: RTCs/ LTCs.

2222

Courses on Workshop & Test EquipmentCourse Code: WTE - 1


Objective: To enable participants to understand the Bosch Test Equipment range and basic troubleshooting.

Participants: Bosch Authorised Workshop Personnel nominated to handle Test Equipment.

Course Content: Practical Demonstration and Troubleshooting of Workshop Equipment like FIE Test Bench, AE Test Bench, BAT 121, Battery Charger, etc.

Place: RTCs.

Course Code: BWSS

Duration: Two days.

Objective: To enable participants to become competent in using ESI[tronic] and MSI.

Participants: Bosch Car Service/ Bosch Authorised Workshop Personnel nominated tohandle ESI/ MSI.

Course Content: Practical Demonstration of ESI/ MSI and Practice by Participants, WorkshopReports, Manufacturing Codes, Warranty Terms and Procedures.

Place: RTCs/ LTCs.

Course for Defence PersonnelCourse Code: DEF - 1

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment, Auto Electrical and other Bosch Products.

Participants: Nominated Personnel from Defence Organisations.

Course Content: Working Principle, Repair and Testing of PE Multi-cylinder Pumps, Alternators,Starter Motors and other Bosch Automotive Accessories.

Place: RTCs.

Course for OE CustomersCourse Code: OEM

Duration: Two days.

Objective: To provide knowledge on Bosch Products (FIE and AE) and to apprise participantsof the latest developments in Bosch Products.

Participants: Managers/ Engineers of OEMs manufacturing Diesel Engines and Vehicles.

Course Content: Design, Working Principle, Test Procedure of Bosch Products (FIE and AE),and Latest Developments.

Place: RTCs/LTCs.

23

Courses for Students and LecturersCourse Code: NEI - 1

Duration: One day.

Objective: To make participants knowledgeable about newer automotive technologies.

Participants: Final year students from technical educational institutes.

Course Content: Newer Technologies in Diesel and Petrol Injection, Vehicle diagnosis – Hardwareand Software, and Product Knowledge on Newer Automotive Technologies and Accessories.

Place: RTCs/ LTCs.

Course Code: INS

Duration: One day.

Objective: To provide knowledge on all Bosch Products, Test and Diagnostic Equipment.

Participants: Lecturers from Engineering colleges, Polytechnics and other Educational Institutions.

Course Content: Basic knowledge on all Bosch Products, Test and Diagnostic Equipment andLatest Developments.

Place: RTCs/ LTCs.

2424

Courses for Bosch Car Service (BCS)Course Code: BCS - 1 – Basic Module

Duration: Two days.

Objective: To enable operating level Bosch Car Service Personnel understand the concept and make them competent in Vehicle Diagnosis.

Participants: Bosch Car Service Technicians.

Course Content: 1. Engine tuning and performance testing2. Clutch introduction and maintenance3. Steering and wheel alignment4. Brake system5. Suspension system6. Battery starter and Alternator maintenance7. Application of KTS

Place: RTCs/ LTCs.

Course Code: BCS - 2 – Advanced Module


Objective: To make Bosch Car Service Personnel competent in handling business, customer service and technical issues.

Participants: Bosch Car Service Works Incharge.

Course Content: 1. Industry, service marketing, customer service2. Introduction to Petrol & Diesel Injection system, Different Generations3. Diagnosis & Troubleshooting using KTS4. Practical demonstration on the vehicle


25

Course Code: EEM - 1 (Electricals/ Electronics – Module 1) – Basic Module


Objective: Refreshing the basics of vehicle electrical system & vehicle electronicsystem. Test possibilities of different systems in the vehicle.

Participants: Vehicle Mechanic/ Electrician and Automotive Engineer with limitedknowledge of the field of Vehicle Electric System/ Electronic System.

Prerequisite: Knowledge of ESI[tronic] and Bosch Tester Application

Course Content: 1. Ohm’s law as well as Electro-Technical basics

2. Design and mode of Operation of Electrical Systems

3. Measurement of Electrical Systems with different measurement

4. Devices such as multimeter, ammeter, voltmeter as well as engine tester

5. Understanding the simple Electronic circuits/ Components

6. Practical implementation of theoretical knowledge by measurement exercisesdirectly on the vehicle

7. Understanding and trouble shooting of the wiring system on the Vehicle


Course Code: BCCE (Body and Comfort and Convenience Electronics) – Expert Module

Duration: Two days.

Participants: Vehicle mechanic/ electrician/ motor mechatronic engineer, Automotive engineer/ master mechanic with good knowledge for application of ESI(tronic) & Bosch testing devices KTS.

Prerequisite: Safe dealing with diagnostic device KTS and ESI[tronic]

Course Content: Installation and functioning of Air Conditioner and components. Components of hydraulic circuits for throttle and expansion valve. Assembly and function of Air-condition control. Components of air conditioner control such as switch, sensor, actuator motor & control unit. Testing of systems in the vehicle with help of ESI[tronic], CAS/ CAS (plus) KTS 550/ 570 Developing diagnostic strategies and detection of diagnosis possibilities primarily in complete system of vehicle. Practical operation in vehicles which are equipped with the above mentioned systems.

Place: RTCs and LTCs.

Course Code: CAN (Automotive Networking) – Expert Module

Duration: One day.

Objective: Understanding the set-up and functions of the networkedsystems in the vehicle and their testing possibilities.

Participants: Motor Mechanic with knowledge of Vehicle's Electric/ ElectronicSystem, Automotive Engineer, Vehicle Electrician

Prerequisite: Safe dealing with diagnostic device KTS and ESI[tronic].

Course Content: 1. Principle set-up of CAN database 2. Design and differences of different bus systems3. CAN protocol set-up4. Network – topology5. Dos & Don’t’s CAN system6. Display measurement possibilities using KTS


2626

Course Code: EPSV (Electronic Power Steering) – Advanced Module

Duration: Two days.

Objective: Independent execution of diagnostics/ repair and maintenancework in Electronic Power Steering.

Participants: Vehicle Mechanic/ Electrician/ Automotive Engineer/ Master Mechanic with good knowledge for application of ESI[tronic] & Bosch testing devices KTS.

Prerequisite: Knowledge of training course ESI[tronic] and Bosch tester application.

Course Content: 1. Basic knowledge on mechanical steering system2. Basic knowledge on steering geometry3. Limitation in mechanical steering system4. Inspection of mechanical components5. Overview of EPS and components6. Different EPS modules7. Self diagnosis on vehicle8. Trouble/ testing of the components using KTS


Course Code: MTS&A (Measurement, Testing of Sensors and Actuators) – Advanced Module

Duration: Two days.

Objective: Basic knowledge base for specific diagnosis of faults in vehicle with main focus on safe and effective handling of various systems in the vehicle.

Participants: Motor Mechanic/ Motor Electrician/ Motor MechatronicEngineer/ Automotive Engineer.

Prerequisite: Knowledge of ESI[tronic] and Bosch tester application

Course Content: Summary of diagnosis with measuring devices such as

1. Multimeter2. Engine tester KTS3. Dealing with electrical circuits4. Sensors & Actuators in following systems5. MPFI system6. Common Rail System7. Ignition (Distributor-type & Distributor-less – Electronic)8. Explanation and evaluation of different output and input signals.9. Independent operation with ESI[tronic], KTS, multimeter.


Course Code: EBM (Electrical Battery Management and Electrical On-board

Supply Charging Systems) – Advanced Module

Duration: Two days.

Objective: Independent execution of testing and maintenance workin the vehicle on different systems

Participants: Motor Mechanic/ Motor Electrician/ Automotive Engineer with good technical knowledge and knowledge of Electronic System.

Prerequisite: Safe dealing with diagnostic device KTS and ESI[tronic].

Course Content: Design & mode of operation of following systems

1. Testing of generators2. Testing of starters3. New generators4. Signals from modern generators DFM, W, S

27

5. Start/ Stop system6. Testing and Maintenance of Battery7. Practical work on vehicles which are equipped with the above mentioned systems8. Testing of systems in the vehicle with the help of ESI[tronic].9. CAS/ CAS (plus) and KTS.


Course Code: EXS (Exhaust system & after-treatment in passenger car) – Expert Module

Duration: Two days.

Objective: Independent fault detection of faults in exhaust system in passenger car.

Participants: Motor Mechanic/ Motor Electrician/ Automobile Engineer knowledgein the field of Gasoline/ Diesel System

Prerequisite: Technical knowledge of the Basic fundamentals of Gasoline & Diesel Engine Management System. Practical experience in application of ESI[Tronic] as well as in handling KTS is advantageous.

Course Content: 1. Emission norms ( BS I…IV)

2. Exhaust gas in the Gasoline & Diesel engine3. Lambda Sensor & NOx sensor measuring principle, types, testing possibilities,

Dos & Don'ts4. Possibilities for the after-treatment of exhaust gas in the passenger car

Testing of components and systems by applying KTS in connection with ESI[tronic] and Bosch Emission Testing Equipments in the passenger car

Place: BTC (Naganathapura, Bengaluru), RTCs/ LTCs.

Course Code: CRSD (Diagnosis of Bosch Common Rail Systems passenger car)

– Advanced Module

Duration: Two days.

Objective: Understanding the functions of ECU Self diagnostics of CRS.Specific detection of faults in Bosch Passenger Car Common Rail systems.

Participants: Motor Mechanic/ Motor Electrician/ Automobile Engineer/ Master Mechanic with practical experience in the field of Automotive Diesel System and vehicle diagnostics.

Prerequisite: Safe dealing with diagnosis device KTS and ESI[tronic]. Technical knowledge of Common Rail system.

Course Content: Design and functions of different Bosch Common Rail Generations. Sequence and operating modes of diagnosis software as well as individual test functions with Bosch Diagnostic tester KTS. Diagnostic strategies and specific detection of faults as well as fault rectification Testing of Low-pressure/ High-pressure circuit using Bosch Diesel sets 1 & 3. Testing of Back flow using Injector return flow measuring device.

Place: BTC (Naganathapura, Bengaluru) & RTCs.

Course Code: VM (Vehicle Mechanic - Passenger Car) – Advanced Module

Duration: Four days.

Objective: Fault detection and rectification of faults in suspension, Steering geometry, Clutch system, different sub-systems (cooling, intake, exhaust, lubrication & main components) of the engine.

Participants: Basic training for Motor Mechanic/ Automobile Engineer

Course Content: 1. Design and mode of operation of individual assemblies of engine mechanics, like crankshaft drive, valve train, variable valve control, engine lubrication and engine cooling.

2. Evaluation of engine mechanics by suitable testing procedure especially compression test, pressure loss test.

2828

3. Repair and diagnostics of individual components of clutch (e.g. dual-mass flywheel and self-adjusting clutch)

4. Diagnostics and adjustment of modern chassis and its individual components such as shock absorber, suspension and assisted Steering systems.

5. Requirements for wheel and tyre, wheel balancing

6. Introduction to TPMS (Tyre Pressure Monitoring System)

7. Practical work on vehicles


Course Code: BRM (Mechanical Braking) – Basic Module

Duration: Two days.

Objective: Understanding the Basic mechanical braking system, components,inspecting and testing.


Course Content: 1. Fundamentals of braking system

2. Different type of brake system (mechanical, hydraulic, air)3. Different brake system circuits4. Familiarisation of brake system components and its function5. Inspection and testing of the main components of the brake system6. Removal & replacement method for brake pad, cylinders, etc.7. Measurements: Wheel hub, brake disc, wear test, pressure test8. Classification of brake fluids and importance9. Brake bleeding and Brake pedal setting10. Troubleshooting instruction


Course Code: BRE (Electronic Braking system) – Advanced Module

Duration: Two days.

Objective: Understanding the Anti-lock braking system, components,inspection, troubleshooting & testing.


Course Content: 1. Limitations of mechanical braking system2. Introduction & advantage of ABS

3. Understanding braking force, co-efficient of friction

4. Understanding the braking force in different road conditions

5. Location and function ABS components

6. Understanding of different type of wheel speed sensors

7. Function of Bosch ABS system: ABS 2S, ABS 2E, ABS 5.0, ABS 8.0 in the areas of hydraulics and electricals

8. Understanding the Wiring diagram of ABS

9. ABS: Self diagnosis & SIS on car using KTS, guided troubleshooting

10. ABS bleeding

11. Repair & Safety instructions

12. Introduction to TCS/ ESP


29

Course Code: SRS (Supplementary Restraint System)

Duration: One day.

Participants: Vehicle mechanic/ Electrician/ Motor mechatronic engineer, Automotive engineer/ Master mechanic with good knowledge on application of ESI [tronic] & Bosch testing devices (KTS).

Prerequisite: Safe dealing with diagnostic device KTS and ESI[tronic]

Course Content: 1. Safety specifications and workplace instructions dealing with airbag. Overview of Bosch airbag systems.

2. Assembly and functioning of passive safety systems. Airbag module (driver, passenger window pad), sensor technology of restraint systems. Additional functions such as roll-over protection, safety battery terminal, active head restraint, diagnostics and repair possibilities with ESI[tronic] and KTS.

3. Testing of systems in the vehicle with help of ESI[tronic], CAS/ CAS (plus) KTS 550/ 570

4. Developing diagnostic strategies and detection of diagnosis possibilities primarily in complete system of vehicle. Practical operation in vehicles which are equipped with the above mentioned systems.

Place: BTC (Naganathapura, Bengaluru)

Course Code: BP

Duration: One day.

Objective: To make participants competent in dealing with Bosch Brake Pads.

Participants: BCS Personnel, Bosch Authorised Product Stockists, Bosch Authorised Stockists dealing in Brake Pads.

Course Contents: Working principle of Disc Brakes and FABs of Bosch Brake Pads.

Place: RTCs/ LTCs.

Course Code: DG

Duration: Two days.

Objective: To make participants competent in handling Advanced Diagnostic Equipment like KTS, BAT and other Test Equipment.

Participants: Personnel employed with Bosch Authorised Workshops and BCS.

Course Contents: Diagnosis on vehicles using KTS, BAT and other Test Equipment.


3030

Courses for Express Bike Service (EBS)

Course Code: EBS

Duration: Two days.

Objective: To educate participants about maintenance tips in 2 wheelers, Bosch DG Equipments for 2 wheelers, Bosch product knowledge and warranty terms and conditions.

Participants: Bosch Territory Managers – Sales and Service, Bosch Authorised Distributors' Field Representatives, Bosch Authorised Product Stockist, EBS Dealers.

Course Contents: Working of Gasoline Engines and Maintenance of the vehicle.

Place: BTC (Naganathapura, Bengaluru)

31

Training Centres

BTC - Bosch Training Centre

Naganathapura, Bengaluru.

RTCs - New Delhi, Kolkata,

Pune and Chennai.

LTCs - Chandigarh, Jaipur, Lucknow,

Guwahati, Raipur, Indore, Nagpur,

Ahmedabad, Ernakulam, Hubli and

Secunderabad.

M.C. PantWest

Parag KavthekarNorth

T. NagarajBengaluru

Venkatesha G. G.Bengaluru

Ajay Kumar M. Bengaluru

Shweta Wali Bengaluru

K. AravindSouth

3232

Bosch Limited

Bosch Training Centre

Naganathapura Plant

Electronic City P.O.

Post Box No. 6887, Bengaluru - 560 100

Ph.: (080) 4103 5541/2/3/0

Telefax: (080) 2852 1239/2852 1608

E-mail: [email protected]

[email protected]

[email protected]

Accommodation and Transport Details – Bengaluru

KanteeravaStadium

At Hosur Road between Bosch, Adugodi and Naganathapura Plant

1. Krishna RoomsNo. 77, Hosur Main Road Near Ayyappa Temple, Madiwala Bengaluru - 560 068 Ph.: (080) 2552 5723/24/25

*Tariff:Rs. 995 + Tax (Double, Non-AC), Rs. 1650 + Tax (Double, AC)

Other hotels in the city:

1. Brindavan HotelM.G. Road Bengaluru - 560 001 Ph.: (080) 2558 4000

**Tariff:Rs. 624 (Single, Non-AC), Rs. 780 (Double, Non-AC), Rs. 1116 (Single, AC), Rs. 2475 (Double, AC)

2. Hotel Gautam17, Museum Road Bengaluru - 560 001 Ph.: (080) 2558 8764

**Tariff:Rs. 600 (Single, Non-AC), Rs. 800 (Double, Non-AC)

3. Hotel Harsha Shivajinagar Bengaluru - 560 051 Ph.: (080) 2286 5566

**Tariff: Rs. 4500 (Single, AC Deluxe), Rs. 5000 (Double, AC Deluxe)

4. Hotel Prashanth21, East Tank Bund Road Bengaluru - 560 009 Ph.: (080) 2287 4041

*Tariff: Rs. 450 + Tax (Single, Non-AC), Rs. 600 + Tax (Double, Non-AC), Rs. 850 + Tax (Double, AC)

5. Sri Ramakrishna LodgeSubedar Chatram Road Bengaluru - 560 009 Ph.: (080) 2226 3042

**Tariff:Rs. 310 (Single, Non-AC), Rs. 590 (Double, Non-AC)

6. Woodlands Hotel 5, Sampangi Tank Road Bengaluru - 560 025 Ph.: (080) 2222 5111

*Tariff: Rs. 1900 + Tax (Double, Non-AC), Rs. 2200 + Tax (Non-AC, Deluxe), Rs. 3100 + Tax (AC, Deluxe), Rs. 3000 (Executive Room), Rs. 3900 + Tax (AC Cottages)

7. Hotel Ajantha22-A, M.G. Road Bengaluru - 560 001 Ph.: (080) 2558 4321

**Tariff:Rs. 510 (Single, Non-AC), Rs. 795 (Double, Non-AC), Rs. 1230 (Deluxe Room), Rs. 1400 (Cottage Room)

8. Hotel Sunflower129, Brigade Road Bengaluru - 560 025 Ph.: (080) 2557 1945

**Tariff:Rs. 700 (Double, Non-AC), Rs. 1200 (Double, AC)

Transportation There are frequent bus services at intervals of 30 min. from all the three major bus stations in Bengaluru to Nagnathapura.

Given below is a list of bus numbers from each bus station.

From K.R. Market Bus No. 346J

From Majestic (Kempe Gowda Bus Station/ Central Bus Station) Bus No. 347F

From Shivajinagar Bus No. 347G

Note: The hotel rates mentioned are only indicative. Tariffs may vary. * Rates exclusive of taxes ** Rates inclusive of taxes

33

Bosch LimitedBosch Training CentreC/o Sunehri Exports, Plot No. B-1/ E24 Mohan Co-operative Industrial Estate, Mathura Road,New Delhi - 110 044Mobile: +91 98713 07355E-mail: [email protected]

North Region

Accommodation – New DelhiAll the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:

1. Hotel Bhagirath PalaceOpp. Red Fort Chandni ChowkNew Delhi - 110 006 Ph.: (011) 2386 6223/ 2386 6723

2. Wood Inn Hotel8, Local Shopping Centre Kirti Nagar New Delhi - 110 015 Ph.: (011) 2543 8500/ 2543 9136

3. Vivek Hotel1534 - 50, Main Bazar, Pahar Ganj New Delhi - 110 055 Ph.: (011) 5154 1435/ 5154 1436

4. Hotel RegalShyama Prasad Mukherjee Marg New Delhi - 110 006 Ph.: (011) 2394 3999/ 2397 9115

5. Hotel TouristRam Nagar, Pahar Ganj New Delhi - 110 055 Ph.: (011) 2361 0334-340

6. Rail Yatri NivasNew Delhi Railway Station New Delhi - 110 002 Ph.: (011) 2323 3484

NEW DELHI

3434

Bosch LimitedLocal Training Centre (LTC)Rayat Bahra Skill Development Centre (COC) VIII, Sahauran, Near Kharar (12 Kms from Chandigarh on NH 21)Dist. Mohali - 140 104PunjabTel: +91 160 5009665

Accommodation – Chandigarh

All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:

ChandigarhRailway Station

PanchkulaSector 9

Rayat-Bahra Groupof Institutes, NH 205

Bus StandSector 43

ChandigarhInternational

Airport

1. Hotel Deep PalaceSCF - 248, Motor Market Manimazra, Chandigarh Ph.: (0172) 273 1973

Tariff: Rs. 150 (Standard Single, Air Cooled), Rs. 200 (Standard Double, Air Cooled), Rs. 350 (AC)

2. Hotel Chander PalaceSCO - 453 - 454 Near Dhillon Complex Motor Market, Manimazra Chandigarh Ph.: (0172) 273 4152

Tariff:Standard AC Room: Rs. 300 (Twin-sharing basis) Rs. 400 (Single, Deluxe)

3. Hotel Indian PalaceSCF - 13 - 14, Motor Market Manimazra, Chandigarh Ph.: (0172) 273 9994

Tariff: Rs. 350 (Single Standard, Air Cooled), Rs. 450 (Double, Standard AC), Rs. 650 (Double, Deluxe AC)

4. Hotel J. D. ResidencySCS - 116, Sec 58Mohali - 160 059 Ph.: +91 98885 06734

Tariff: Rs. 1500 (Twin-sharing basis)

Note: The hotel rates mentioned are only indicative and exclusive of taxes. Tariffs may vary.

35

Bosch LimitedLocal Training Centre (LTC)C/o Arora Diesels Akash Deep BuildingA-5, Transport Nagar Jaipur - 302 004

Accommodation – Jaipur

All the participants are advised to arrange their own accommodation as required. Given below is a recommended hotel:

1. Hotel BroadwaysTransport Nagar, Agra Road, Jaipur Ph.: (0141) 511 2010/11, 264 1275

Tariff:Rs. 300 (Twin-sharing basis)


3636

Bosch LimitedLocal Training Centre (LTC)C/o Raman DieselsD-1, Transport NagarLucknow - 226 012

Accommodation – Lucknow


1. Hotel AadharshilaVIP Road, Alambagh, Lucknow Ph.: (0522) 246 0550

Tariff:Rs. 550 (Standard), Rs. 650 (Semi Deluxe), Rs. 850 (AC, Deluxe)

2. Hotel RangoliNear Hardoi Bus Stand, Charbagh Lucknow Ph.: (0522) 263 5926/ 263 5902/ 263 5293

Tariff:Rs. 250 (Air Cooled, Single Bed), Rs. 450 (Air Cooled, Double Bed), Rs. 650 (Single Bed, AC Deluxe), Rs. 90 (Dormitory)

3. Hotel PoojaCharbagh, Lucknow Ph.: (0522) 245 7525

Tariff:Rs. 200 (Single Bed, Attached Bathroom), Rs. 250 (Double Bed, Attached Bathroom)


37

South Region

Accommodation – Chennai


4. Royal Guest HouseOld No. 26, New No. 4, Boobegam Street,Chennai - 600 002Ph.: (044) 2861 1044, 45

Tariff:Rs. 250 (Single room)Rs. 350 (Double room)

5. Sarvana LodgeNext to Hotel Sarvana Bhavan,T. Nagar, Chennai - 600 017



1. Sri Ramakrishna NivasNo. 1, Woods Road, Annasalai, Chennai - 600 002 Ph.: (044) 2860 3329/ 2860 2154

2. Regency Golden Sun HotelNo. 1, Hanumanth Rao Street T. Nagar, Chennai - 600 017 Ph.: (044) 2828 2772

3. Rohini InternationalNo. 67, G.N. Chetty Road, T. Nagar Chennai - 600 017

Bosch LimitedBosch Training CentreBlossom CentreOld No. 27, New No. 30, North Boag RoadT. Nagar, Chennai - 600 017Ph.: (044) 2815 3916/2815 3917Mobile: 091766 40990E-mail: [email protected]

3838

Accommodation – Hubli


1. The Hans HotelP.B. Road, Vidyanagar Hubli - 580 031 Ph.: (0836) 237 4770

2. Hotel CanaraP.B. Road, Hosur Hubli - 590 021 Ph.: (0836) 237 2561

3. Hotel ChalukyaClub Road Hubli - 590 021 Ph.: (0836) 235 4234

4. Hotel AmbeshOpp. Mirjankar Petrol Pump P.B. Road Hubli - 590 021 Ph.: (0836) 227 2378

5. Hotel AyodyaOpp. Old Bus Stand Hubli - 590 021 Ph.: (0836) 235 1951

Bosch LimitedLocal Training Centre (LTC)C/o Manickbagh Diesels Baddi Building Unkal Cross, P.B. RoadHubli - 580 031

39

Accommodation – Ernakulam

Given below is a list of few hotels:

Bosch LimitedLocal Training Centre (LTC)C/o Surya Diesels,Muttom, Thaikattukara P.O.,Opposite Indian Oil Petrol Pump,Aluva-683 106ErnakulamPh.: (0484) 2626 381/ 2626 382E-mail: [email protected]

ERNAKULAM

1. City Gates ResidencyNear IOC Petrol Pump, Muttom.Ph.: (0484) 262 8387


2. M.I.K. Tourist HomeH.M.T Junction, Kalamassery. Ph.: (0484) 255 5010/ 646 1201



4040

Accommodation – Secunderabad


1. Rajadhani LodgePlot No. CFZ/S-13A & B Auto Nagar Vijayawada Highway Hyderabad - 500 070 Ph.: (040) 2412 3434

2. Taj Mahal HotelPatny Centre Secunderabad - 500 003 Ph.: (040) 2781 2106

3. Hotel BaseraS.D. Road Secunderabad - 500 004 Ph.: (040) 2770 3200

Bosch LimitedLocal Training Centre (LTC)C/o Secunderabad Engg. Corp.Plot No. 6, Block No. 11Autonagar, Hyderabad - 500 070

41

East Region

Bosch LimitedBosch Training CentrePost Box No. 9044, 91-A, Park Street, Kolkata - 700 016 Ph.: (033) 2217 2144/ 2217 5222

Accommodation – Kolkata


1. Hotel Capella49, R.A. Kidwai Road, Kolkata - 700 016 Ph.: (033) 2229 4365/ 224 98921

Tariff: Rs. 395 (Single), Rs. 450 (Single room, Twin-sharing basis), Rs. 775 (Double room, Shared by 4)


4242

1. Hotel Shyam SaroverNear Ram Mandir, A.T. Road Guwahati - 781 001 Ph.: (0361) 251 1577/ 254 1611

Tariff: Rs. 100

2. Mayur HotelPaltan Bazar, Guwahati-781008Opp. ASTC Bus Stand Ph.: (0361) 2734855/56/57/58/59/60/61 (0361) 2739603/20/25

Tariff: Rs. 160 (Single Economy)Rs. 200 (Single Standard)Rs. 290 (Single Deluxe)Rs. 600 (Single Super Deluxe)Rs. 299 (Double Economy)Rs. 400 (Double Deluxe)Rs. 700 (Double Super Deluxe)Rs. 800 (Double Special Deluxe)Rs. 900 (Double Executive)Rs. 1200 (Double Premium)Rs. 1000 (Junior Suite)Rs. 1300 (Semi Suite)

3. Hotel EdenOpp. Bengali H. S. School, G.S. Road, Paltan Bazar, Guwahati -781008 Ph.: (0361) 2739578, 2639963

Tariff: Rs. 300 (Single Deluxe)Rs. 550 (Single Deluxe)Rs. 650 (Single Deluxe/ AC)Rs. 1000 (Double Deluxe/ AC)

4. Hotel RialtoGNB Road, Paltan Bazar,Guwahati - 781001 Ph.: (0361) 2131210, 2734450

Tariff: Rs. 1800 (Executive)Rs. 1500 (Deluxe)Rs. 1000 (Standard)

Accommodation – Guwahati


5. Hotel Hornbill Md Shah Road, Paltan Bazar,Guwahati - 781008 Ph.: (0361) 2735401

Tariff: Rs. 1400 (Single Deluxe) & Rs. 1600 (Double Deluxe)Rs. 1600 (Single Luxury) & Rs. 2000 (Double Luxury)Rs. 2200 (Single Executive) & Rs. 2600 (Double Executive)Rs. 3600 (S Hornbill suite) & Rs. 3600 (D Hornbill Suite)Rs. 9500 (S President suite) & Rs. 9500 (D President Suite)


Bosch LimitedLocal Training Centre (LTC)C/o Guwahati Diesels A.T. RoadGuwahati - 781 001

43

Accommodation – Raipur


1. Gass Memorial CentreOpp. Raipur Diesels Near Jai Stambh Chowk K.K. Road, Moudhapara, Raipur Ph.: (0771) 235 6532

Tariff: Rs. 145 (Single), Rs. 210 (Double)

2. Hotel Usabh PalaceK.K. Road Near Gujarati School, Raipur Ph.: (0771) 503 0824

Tariff: Rs. 250 (Single), Rs. 150 (Double), Rs. 100 (Dormitory)


Bosch LimitedLocal Training Centre (LTC)C/o Raipur DieselsKrishna Kumar RoadRaipur - 492 001

4444

West Region

Accommodation – Pune


Bosch Limited Bosch Regional Training Centre, C/o Don Bosco Vyawasaik Prashikshan Kendra, Near St. Andrews School, Chinchwad (East), Pune – 411 019.Ph.: (020) 6410 0558 (020) 6410 0559

Bosch(RTC)

Mosque

ShangaviCollege

ShahuMaharaj Talav

MohanNagar

Kalbhor NagarBus/StateTransport Stop

Chinchwad-Bhosari Rd

Old M

umbai Pune Highw

ay

8. RajashriPimple Bhavan, Kharal Wadi, Pimpri, Pune - 411 018 Tariff: Rs. 500 - 1000Ph.: (020) 2742 1749Mobile: +91 77095 83152

9. ManojAlandi Road, Bhosari, Pune - 411 039Tariff: Rs. 500 - 1000Ph.: (020) 2742 1749Mobile: +91 96041 31928

1. Royal ParkMumbai - Pune Road, Behind Siddharth Motors, Kasarwadi Tariff: Rs. 1000 - 2000Ph.: (020) 4073 1111Mobile: +91 98604 81343

2. White HouseMumbai - Pune Road, Near Jain Mandir, Opp. Jaishree CinemaChinchwad Station, Pune. Tariff: Rs. 1000 - 2000Ph.: (020) 6682 7954

3. JayratnaJ/P-114, J-Block, MIDC, Indrayani Nagar Indrayani Chowk, Bhosari Industrial Estate,Pune - 411 026 Tariff: Rs. 1000 - 2000Ph.: (020) 2712 9911Mobile: +91 95278 56603

4. ShreeyashS/P-108, S Block, MIDC Philips Co Landewadi, Bhosari Industrial Estate, Pune Tariff: Rs. 1000 - 2000Ph.: (020) 2711 9911Mobile: +91 98230 68188

5. KaminiShewale Complex, Opp. Elpro Company Chinchwad, Pune - 411 033 Tariff: Rs. 1000 - 2000Ph.: (020) 2735 4655

6. SatelliteLane No. 6, Koregaon Park Land Mark Next to Kiva,Pune - 411 001 Tariff: Rs. 1000 - 2000Mobile: +91 93730 01377

7. KalpanaSr No. 206/1, Station Road, Pune Tariff: Rs. 1000 - 2000Rs. 500 - 1000 Mobile: +91 93733 30177

45

Bosch Local Training Centre,C/o Government Polytechnic,Department of Automobile Engineering,Near Mangalwarti Bazar, SadarNagpur: 440 001.

LTC

Dept ofMetallurgy

Gol Bazaar

Gaddigodam

Chindw

ada Rd

Chi

ndw

ada

Rd

IT Dept

MangalwadiGarden

AnjumanJr College

NH

69

Sadabai RaisoniWomen’s College

GovernmentPolytechnic

Accommodation – Nagpur


1. Dua ContinentalMount Road, Extension, Kamptee Road,Nagpur - 440 001 Tariff: Rs. 1900 (AC: Single) Rs. 2300 (AC: Double)Ph: (0712) 252 0802, 653 8801

2. LB HotelMount Road, Extension, Kamptee Road,Nagpur - 440 001Tariff: Rs. 1900 (AC: Single) Rs. 2300 (AC: Double) Ph.: (0712) 661 6020, 661 6040

3. Hotel Nandini129, Opp. Mayo Hospital,CA Road, Nagpur - 440 018 Tariff: Rs. 600 (Non AC: Single) Rs. 600 (Non AC: Double)Rs. 750 (AC: Single) Rs. 850 (AC: Double)Ph.: (0712) 272 2120

4. Hotel Rajhans3, Central Avenue, Opp. Chandralok Building,Nagpur - 440 018Tariff: Rs. 550 (Non AC: Single)Rs. 800 (Non AC: Double)Rs. 730 (AC: Single)Rs. 1160 (AC: Double)Ph.: (0712) 272 6075, 646 6152Mobile: +91 98906 73302

4646

Accommodation – Ahmedabad


1. Hotel MoniOpp. Shakti Estate Narol Isanpur Road Ahmedabad

Tariff:Rs. 300 (Single), Rs. 400 (Double)

2. Hotel Prestige Opp. Sai Diesels, Narol Cross Road Near Vijay Transport, Ahmedabad


3. Hotel EllisBridge, Opp.Town Hall, Ashram Road, AhemadabadPh.: 098240 26530/ 079 2657 5811

Tariff:Rs. 300 to 500 (Single), Rs. 400 to 625 (Double)A/C Rooms at Extra Cost

4. Hotel AtithiOpp. Kasturi Dining Hall, Paldi, AhemadabadPh.: 098250 39809/ 079 2658 2912

Tariff:Rs. 200 to 300 (Single), Rs. 300 to 400 (Double)

Bosch LimitedLocal Training Centre (LTC)C/o Sai Diesel Service 2/A, Geetabhavan Opp. Vijay Transport Near Kashiram Textile Narol, Ahmedabad - 380 005

5. Hotel KapadiyaNear, V. S. Hospital, Opp. Mahak and Building, Ellis BridgePh.: 093270 07923/ 079 2657 9571

Tariff:Rs. 300 (Single), Rs. 400 (Double)Rs. 100 (Dormitory)

6. Hotel GurukrupaEllis Bridge, Behind Town Hall, Ashram RoadPh.: 079 2657 7174



47

Bosch LimitedLocal Training Centre (LTC)C/o Ujjain Diesels Pvt. Ltd. 118 - A, Transport NagarIndore - 452 001

Accommodation – Indore


1. Hotel Mayur39, Chhoti Gwal Toli Opp. Madhu Milan Cinema Indore Ph.: (0731) 270 5786/ 270 6786

2. Hotel Parag RegencyNear Kibe Compound Kamala Nehru School Road Indore Ph.: (0731) 504 2276

3. Hotel Uday Palace7, Kibe Compound Near Madhu Milan Talkies Indore Ph.: (0731) 270 4088

4. Hotel PoonamChhoti Gwal Toli Near Patel Statue Indore Ph.: (0731) 252 2250/ 252 2273

5. Hotel CrownOpp. Sarwate Bus Stand Indore Ph.: (0731) 252 2250/ 252 2273

6. Hotel New Sunder17/2, South Tukoganj Indore Ph.: (0731) 252 9051/ 252 0128

7. Hotel GalaxyTower Chouraha Indore Ph.: (0731) 247 2602/ 244 0206


4848

Eligibility and Enrolment Procedure

The Bosch Training Centre

Your partner in educating your specialists

Qualified, experienced and competent personnel are essential for handling service of Bosch products.

Send your personnel for training and further education to the Bosch Training Centre. Ensure that you remain competitive in the future. Plan now for your future requirements.

Note: Training Fee will be debited to Network directly by Bosch Limited (DD not required). For Externalcustomers like OEMs, OECDs, STUs, Defence and Educational Institutions, Application Form to be accompanied with DD.

Eligibility

f Only those candidates who are employed with and sponsored by Bosch Authorised Representatives,Original Equipment Customers and their Dealers, State Transport Undertakings, Defence Organisations, Government Departments, ITI, Diploma College, Engineering Colleges, JOC Colleges, etc., are normally considered eligible for training.

f Candidates should have adequate working knowledge of the medium of instruction. The course should be selected depending upon the proficiency of the candidate in the particular language.

Fee

f For Courses/ Seminars at BTC: Rs. 900 per day/ person + taxes ( 12.36% )

f For Courses/ Seminars at RTC / LTC: Rs. 500 per day/ person + taxes ( 12.36%)

How to apply?

Bosch Training Courses are offered at Bengaluru, Chennai, Ernakulam Kolkata, Pune, New Delhi, Ahmedabad, Nagpur, Chandigarh, Guwahati, Indore, Jaipur, Lucknow, Raipur, Secunderabad and Hubli. Candidates may apply at any Training Centre of their choice. Application should be made on the prescribed application form, giving the required particulars to the BTC, or the respective RTCs/ LTCs of the region.

Bengaluru: Bosch Training CentreBosch Limited Naganathapura Plant, Electronic City P.O. Post Box No. 6887, Bengaluru - 560 100 Ph.: (080) 4103 5541/ 42/ 43/ 40. Fax: (080) 2852 1608/ 2852 1239 E-mail: [email protected], [email protected], [email protected]

For RTC/ LTCs at Chennai, Ernakulam, Hubli and Secunderabad, apply to: Chennai: Regional TrainerBosch Limited Blossom Centre Old No. 27, New No. 30, North Boag Road T. Nagar, Chennai - 600 017 Ph.: (044) 2815 3916/ 2815 3917 Mobile: +91 91766 40990 E-mail: [email protected]

For RTC/ LTCs at Kolkata, Guwahati and Raipur apply to: Kolkata: Regional TrainerBosch Limited Post Box No. 9044 91-A, Park Street, Kolkata - 700 016 Ph.: (033) 2217 2144/ 2226 4570. Fax: (033) 2249 7482

49

For RTC/ LTCs at Pune, Ahmedabad, Nagpur and Indore, apply to: Pune: Regional TrainerBosch Regional Training Centre, C/o Don Bosco Vyawasaik Prashikshan Kendra, Near St. Andrews School, Chinchwad (East), Pune – 411 019 Ph.: (020) 6410 0558 (020) 6410 0559 Mobile: +91 99875 64775 E-mail: [email protected]

For RTC/ LTCs at New Delhi, Chandigarh, Jaipur and Lucknow, apply to: New Delhi: Regional TrainerBosch Limited C/o Sunehri Exports, Plot No. B1/E24, Mohan Co-operative Industrial EstateMathura Road, New Delhi - 110 044 Mobile: +91 98713 07355 E-mail: [email protected]

How to apply?

Working Hours:

RTCs/ LTCs: Monday to Friday – 1000 to 1700 hr.

BTC: Monday to Friday – 0900 to 1600 hr.

f Candidates are required to make their own arrangements for lodging, boarding and transport. Some hotels are listed in this brochure. If any assistance is required, candidates may approach the respective Training Centres.

f In order to maintain the quality of training (during practical demonstration classes) the number of candidates for each course is restricted to 12.

f Seats are reserved on a ‘first-come-first-served’ basis. Candidates are to be deputed only after receipt of the confirmation from Bosch.

f Candidates reporting for a course without our confirmation will be accommodated only if there is a vacancy.

f Candidates attending the course should bring a letter of introduction from the sponsoring organisation.

f Although precautions are taken for the safety of the trainees, the company assumes no responsibility for any injury caused to them or loss of personal articles during the training period.

f No refund of the Seminar/ Course fee for non-participation will be made, nor will it be adjusted for another Seminar/ Course.

f Photography is prohibited within the factory premises.

f Applications should reach the Training Centres at least four weeks in advance of the required Seminar/ Course.

f Applicants should not bring any laptops, mobiles with cameras, floppy diskettes, CDs/ DVDs, video cameras, pen drives or memory sticks.

f Participants shall be held responsible for the loss of any Bosch property from the Training Centres during the Training courses.

5050

Notes ___________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

51

Bosch Limited,Bosch Training Centre,Automotive Aftermarket,Naganathapura Plant, Electronic City P.O.,Post Box No. 6887, Bengaluru - 560 100.Ph: (080) 4103 5540/ 41/ 42/ 43Fax: (080) 2852 1608/ 2852 1239Toll Free No. 1800 108 1081www.boschindia.comwww.boschtraining.in

Date post:	10-Nov-2014
Category:	Documents
Upload:	yash1239
View:	87 times
Download:	0 times

Training Program Guide 2013

Documents