Date post: | 15-Jul-2015 |
Category: |
Engineering |
Upload: | transcat |
View: | 234 times |
Download: | 2 times |
DPI 611 Hand-held Pressure Calibrator
Tom Reid
North America Sales Manager, Pressure Instruments
Druck and GE
Druck was established in 1970 to develop and manufacture silicon diaphragm piezoresistive pressure transducers for the aerospace industry−jet engine development and wind tunnels. Druck was acquired by GE in 2002 for its measurement and control product line.
Incorporating Druck transducer expertise, the first Druckportable pressure calibrator, the DPI 600, was introduced in July 1981.
Since then, more than 200,000 DPI 600 Series calibrators have been sold, including the highly successful DPI 610.
Druck DPI 610 Series
DPI 610 has been the market
leader—an industry workhorse
referred to as the “Druck.” It
featured:
• 0.025% FS accuracy
• Built-in pressure vacuum pump
• Dual readout: pressure and
electrical
• 24 Vdc power supply
• Documenting functionality with
RS232 communication
Meet the Druck DPI 611
The new DPI 611 builds on
the 600 Series legacy and
has:
• Increased accuracy for
pressure and electrical
• A smaller, lighter yet more
rugged form
• An improved pump
• Digital sensor technology
• A simplified interface
• USB connectivity
What makes DPI 611 a “Druck”?
• Druck expertise in design and manufacture of
high accuracy pressure sensors, measurement
and digital electronics, ergonomic enclosures and
precision mechanical pressure systems
• Total control over design, development,
manufacturing in UKAS accredited facility
• GE engineering expertise and global support
Why is DPI 611 so good?
• 50% smaller and lighter than
DPI 610
• Generates 0 to 300 psi in less
than 30 seconds
• Creates 95% vacuum
• Pressure measurement
accuracy 0.0185% FS
• Significantly improved electrical
“total uncertainty”
Why is DPI 611 so good?
• Low power requirements (AA
batteries, Li-ion rechargeable
or line power)
• Simplified touch screen
interface with application
DASHBOARD, quick TASK
selection, FAVORITES storage
• Calculates PASS/FAIL errors,
documents results
• Interface with calibration
software
The engineering behind DPI 611
• DPI 611’s innovative design
combines carefully selected
materials with high-tolerance
machining for perfect finishes.
• Advanced materials and precision
molding make DPI 611 rugged
and weatherproof.
• State-of-the-art microelectronics
produce accuracy and processing
capability with a unique simple-to-
use interface.
Generate 300 psi in your hand• Generate 300 psi or 95%
vacuum holding the instrument
in one hand
• Just 30 seconds to generate
maximum pressure, even with
3-foot hose connected to the
device under test
• Ergonomic design for firm
hand-held use and instrument
security on test bench
• Precision vent valve for
decreasing pressures
• Built-in over-pressure
protection
• The digitally corrected Druck
pressure sensor uses
advanced silicon technology to
achieve more than twice the
accuracy of the DPI 610
• Total uncertainty gives
complete confidence between
annual calibrations
• Pressure ranges: -14.5 to 15,
30, 100, 150 and 300 psi
Get better pressure accuracy
And better electrical
• Measure and source DC voltage and current with best
in class total uncertainty
• Provides 24Vdc loop power
• All electrical functions through four weatherproof
sockets
• Built-in loop calibrator: measure DC voltage to 2000 mV
and 30 V, current to 55 mA
• Source voltage to 24V,
current to 24 mA (with or
without loop power)
Get ready in less time
• GE Druck designed Quick-to-
Fit adaptor system for leak-tight
pressure connection in the field
• No tools or sealing required
• Damaged adaptors simply
replaced with no repair
downtime
• Proven to significantly reduce set-up time
The DPI 611 uses the same interface design
as the unique DPI 620 Genii multifunction
calibrator/communicator
The DASHBOARD allows quick application
selection
The TASK menu provides a library of popular
configurations
A FAVORITES menu gives quicker access to
regularly used and customized TASKS
Touch screen makes it intuitive
The touch screen is easier to
use than complex keypads
with special function keys
Connection diagrams can be
viewed on the screen
2. Touch to
make selection
1. Swipe from
right to left
3. Touch to
select the
TASK
The DPI 611 is a simple-to-use
“everyday” tool for maintaining and
calibrating pressure instruments, but
it also has the advanced features of
the DPI 620 Genii. It can automate
calibration procedures, calculate
errors and interface with calibration
and maintenance systems.
Automated calibration procedures
PASS/FAIL error analysis
Multi-channel data logging
Connectivity with leading calibration and maintenance software, including GE’s 4Sight
Export results to Excel with .csv files
Automate, document, connect
Advanced capabilities: Loop Calibrator
Step and ramp mA output
Simply configured for simulating
transmitter outputs into control
loops, testing valve positioners
and checking safety systems
• % step: for example, 25%
provides 5 test points of 4, 8,
12, 16 and 20 mA
• Defined step: the step size is
defined as a value in mA
• Span check: for example, 4
and 20 mA for checking zero
and FS
• Ramp: perfect for
dynamically testing switches
Advanced capabilities
• Switch test: automates
switch testing
• Pressure leak test: detects
leaks and determines leak
rates
• Nudge: simply use the
up/down keys to determine
trip values
Additional capabilities
• Max/min: captures maximum and
minimum values and calculates the
mean
• Relief valve: captures the venting
pressure of a relief valve
• Scaling: for example, read mA or V
output as pressure
• Resolution: match the display
resolution to that of the test device
• Help: view wiring connection
diagrams and the user manual on-
screen
• Druck Intelligent Digital Output
Sensors for increased range
capability
• Ranges from 10” H2O through
10,000 psi
• Accuracy to 0.01%
• USB connection
IDOS external pressure sensors
Pressure vent valve
(precision needle valve for
fine control)
Hand strap
attachment
USB master and
slave sockets with
protective cover
Pressure/vacuum
selection
Hand pump
Volume adjuster for
precise pressure
setting
Padded leather hand
strap (attaches to left
or right side)
Quick fit pressure
adaptors system (no tools
required)
Electrical connections for
measuring mA, mV, V
and detecting switch
contacts
10V DC regulated
supply and 24V loop
power
Full color touch
screen display
Anti-slip feet (front and rear)
On/off/sleep
DPI 611 in review
Calibration solutionsDPI 611 is another addition to a
family of calibration solutions
• Pressure
• Temperature
• Multifunction Process
• HART® and Fieldbus communication
• Calibration and maintenance
software
Thank you.
Limited Time Offer
• Free Dirt & Moisture Trap through 12/31/14• Order from Transcat
– www.transcat.com– 800-800-5001
Questions or Comments?
Email the moderator, Nicole VanWert: [email protected]
Transcat: 800-800-5001
www.Transcat.comFor related product information, go to:
www.Transcat.com/GE