Translatedcopyof129995047-taclleW

8/12/2019 Translatedcopyof129995047-taclleW

http://slidepdf.com/reader/full/translatedcopyof129995047-tacllew 1/22

WellCat



LandMark

one

WellCat

Training Handbook





2

WellCat

LANDMARK

A Halliburton CompanyCopyright © Landmark Graphics Corporation All Rights Reserved Worldwide

This publication has been provided in relation to an agreement containing restrictions on use. This publication is also protected

under the Federal Copyright Act. No part of this document may be copied, distributed, transmitted, transcribed, stored in any

retrieval system or means, or translated into any human or computer language in any form or by any means, electronic, magnetic,

manual, or some other kind; not be disclosed to any third party without the express written permission of:

Landmark Graphics Corporation

15150 Memorial Drive, Houston, TX 7709, USA: Phone: 281-560-1148

Phone: 800526-3004FAX: 281-368-5670 E-mail : [email protected] Internet: www.lgc.com

Trademark Notices

Landmark, Landmark logo, 3DVIEW, ARIES, Automate, BLITZ, BLITZPAK, CasingSeat,

COMPASS, Contouring Assistant, Decision Suite, Decisionarium, DepthTeam, DepthTeam Explorer,

DepthTeam Express, Extreme DepthTeam, DepthTeam Interpreter, DESKTOP-PVT, DESKTOP

VIP, DEX, DFW, Dims, Drillability Suite, DrillModel DSS, EarthCube, EdgeCa $ h, Fastrack, FZAPI,

GeoDataLoad, GEOLINK, GRIDGENR 12 Enterprise, iDims, LogEdit, LogPrep, MathPack,

OpenBooks, OpenExplorer, OpenJournal, OpenSGM, OpenVision, OpenWorks, PAL, Parallel-VIP,PetroWorks, PlotView, Griddiong Plus Point, Pointing Dispatcher, PostStack, PostStack ESP,

PROFILE, ProMAX, ProMAX 2D, 3D ProMAX, ProMAX 3DPSDM , ProMAX MVA, ProMAX

VSP, RAVE, Reservoir Framework Builder, RMS, SafeStart, SeisCube, SeisMap, SeisModel,

SeisWell, SeisWorks, SigmaView, StrataMap, Stratamodel, StratAmp, StrataSim, StratWorks,

StressCheck, SynTool, SystemStart, SystemStart for Clients, SystemStart for Servers, Storage for

SystemStart, T2B, TDQ, TERAS, TOW / cs,

LandMark



3



WellCat

TOW / cs The Oilfield Workstation, Trend Form Gridding, VIP, VIP-COMP, VIP-CORE,

DUAL-VIP, VIP-ENCORE, VIP -EXECUTIVE, VIP-Local Grid Refinement, VIIP-POLYMER,

VIP-THERM, Wwllbase, WELLBOREe Planner, WELLCAT, WELLPLAN, ZAP!, and Z-MAP

Plus are trademarks of Landmark Graphics Corporation. All other trademarks are property of theirrespective owners.

NOTE

The information in this document is subject to change without notice and should not be construed as a

commitment landmrk Graphics Corporation. Landmrk Graphics Corporation assumes no responsibility

for any errors that may appear in this manual. Some states or jurisdictions do not allow disclaimer or

express or implied ignorance of certain transactions; therefore, this statement probably does not apply

ifTeam:..

Supporting Branches Address

1 - License Management (Only for information regarding licensing)

International Web: (http://www.lgc.com ) Telephone Number: USA:

1.281.560.1110, option 6 Outside USA: 44 (0) 932.832100 Email: license

© lgc.comTel:..

2 - Landmark Graphics Corporation

15150 Memorial Dr Houston, TX 77079-4304 +1.281.560.1200 Toll

Free: 1 877 HELP.LGC (435.7542) FAX: 1.281.368.5651Tel:...

LandMark



WellCat



4:

Email support © lgc.com

3 - Landmark Graphics Corporation

Wellheads Crescent Wellheads Industrial Estate Dyce Aberdeen,Scotland AB21 7GA +44.1224. 778500 FAX: +44.1224.778555

pc-support-abereen © lgc.com

Email:.4 - Landmark Graphics Corporation

11th Floor Menera Tan / Tan 207 Jalan Tun Razak 50400 Kuala Lumpur

Malaysia Tel: +60 3 21641121 FAX: +60 3 21641135 24 hrs (Dims): +61

89482-4140 Email: Klsupport © lgc.com

5 - Landmark Graphics Corporation 645 7th Ave # 2200 SW ∙ Calgary,

Alberta Canada Tel T2P4GB. + 1-281.560.1200 Toll free: +

1.877.HOP.LGC (435.7452) © lgc.comsupport

Email:.6- Landmark Graphics International

Level 1, 1 Capital Centre 256 St. George's Terrace Perth, WA 6000

Australia Tel: + 61 8941-4488 FAX: + 61 89481 -1580

LandMark



MayWell



Cat

24 hrs (Dims): +61 89482-4140 Email: ozsupport © lgc.com

7 - Landmark Graphics International Inc. Beijng

officeroom 2208, Capital Mansion Beijing

Chaoyang District, Beijing 100004, China Tel: 86-10-64654501 FAX:

86-1064654819

LandMark



6



WellCat

CONTENTS

1 INTRODUCTION

2 OVERVIEW OF PRACTICE AND THEORY3HOME AS

4 DEFINITIONWELL

menu well

DRILLING5

6PRODUCTION

7CASING

PIPE PRODUCTION 8

9MULTIPLE STRING

10 NOTES

LandMark



7



WellCat

Chapter 1 Introduction

TRAINING COURSE OBJECTIVES

To familiarize each participant with the following:

•

Basic Principles of Design of Tubular

•

Design ConsiderationsTriaxial

•Simulation Theory and Practice temperature and pressure in wells

•

Input well data

•

Specifications and cargo operations

•

Documentation of results

•

Integration programs

•

Special FeaturesAt the end of the course, the participant will be able to:

• Understand the design process of essentially tubular

• Appreciate the complexities of nodal thermal analysis

• Appreciate the transcendent issues facing the engineer design



• Learn how to apply WellCat in designing safe andwells.

cost effective

LandMark



8



WellCat

WHY ARE REQUIRED

TEMPERATURES?

• Termssettlement

• Movements andefforts tubular

LandMark

=

ƒ (AT)

• Buckling

•Design cement

•fluid density and viscosity

=

ƒ (temperatures)

• Limitations team

Preventers (BOP) and elements of

packaging seals

• Increased annular pressure

loads on packaging •

• Loads and movements on wellheads

• Factors in resistance of tubular

^yield strength

f



=(temperature)

• Corrosive environments

^material selection

• Training hydrates and paraffins deposit

S ystem W ell C at



9



WellCat

Production Drilling

Generation

Load

Stress Analysis

Casing

Reliable accurate thermal modeling analysis of the service life of Wells Complex

Critical Design Analysis of movement and efforts tubular Use as stand-alone

applications or integrated sets

APPLICATIONS WELLCAT

LandMark

pipe production





WellCat

TEMPERATURE FOR CRITICAL APPLICATIONS

• Wells - at high pressures andelevated temperatures

• Wellsin the Arctic or deep water production • Pipe Insulation

• Designgrout

• Expansionnoise in the annulus (in subsea wells)

• Calculation of undisturbed temperatures from data

log

• Design of wells geotérmios

ADVANCED ANALYSIS

• Buckling advanced andfriction

complex• Terminations

•critical Wells

LandMark

Date post:	03-Jun-2018
Category:	Documents
Upload:	zambroata
View:	217 times
Download:	1 times

Translatedcopyof129995047-taclleW

Documents