Temperatureshop.forberg.com/customer/forsci/customerpages/pdf/... · Transmitters iTEMP®...

TemperatureComplete solutions for the most measured parameter in process automation

Full support for your needs from planning to installation and operation

Complete solutions from Endress+Hauser

SILOptimizing your SIS - Safety Instrumented SystemsEndress+Hauser provides SIL - Safety Integrity Level transmitters for service in SIS - Safety Instrumented Systems.

• SIL- rated temperature transmitters are standard offerings - another commitment to safety• Endress+Hauser provides safety application knowledge beyond that covered by SIL methodology• We can offer condition monitoring of SIL instruments to optimize SIS availability and false trip management

Custom solutions for your application

TransmittersiTEMP® transmitters are an installation-ready solution to improve the functionality of temperature measurement by increasing accuracy and reliability when compared to direct wired sensors. Overall installation costs are lower than with direct wired sensors, since inexpensive two-conductor 4-0 mA signal wire can run over long distances instead of expensive extension or compensation wires for thermocouples. Each transmitter can be configured for a variety of sensor inputs: RTD, thermocouple, millivolt or ohm. All iTEMP® transmitters provide long term stability < 0.05% per year.

Field transmittersHighest reliability in harsh industrial environments due to dual compartment housing and compact, fully potted electronics and brilliant blue back-lit display.

Head transmittersInstead of directly wiring your temperature sensors to your control system, use transmitters to reduce wiring and maintenance costs while increasing measurement accuracy.

DIN rail transmittersThese compact transmitters mount in confined spaces and enable better temperature measurement by converting the sensitive sensor signal and increasing its stability, while monitoring the measuring element.

Complete temperature assembliesWe offer sensor assemblies in both American and European styles for a wide range of applications. Our assemblies meet the highest industry standards for reliability, accuracy and performance. Our product offering caters to:• General purpose applications such as HVAC, water

treatment, plastics and metal processing • Explosion proof and heavy duty industries

such as Chemical and Oil and Gas Refining

• Hygienic industry such as Food and Beverage, Pharmaceutical and Life Sciences

Building a partnershipWhen you work with Endress+Hauser you you experience the values of a global company with deep strong local ties.

Our trained workforce ships to you completely assembled and tested products and our skilled experts can help you start up and service our products nationally and worldwide. We offer short delivery times thanks to our local production and assembly facilities in the United States for the North American market.

With 34 sales organizations and 18 production centers globally, we make the perfect partner for global clients, skid manufacturers and OEMs.

Approvals• International certificates such as FM (USA), CSA (Canada),

ATEX (Europe)• Meets sanitary standards such as 3-A (USA) and EHEDG

(Europe)• CE Mark (EMC, Low Voltage Equipment Guideline)• Explosion proof approval for installation in Div. 1• UL recognized components• Ship building approval ABS (USA) and GL (Europe)• NAMUR NE 43

1 2 4 5 Ó â 0

Temperature is the most measured parameter in process automation. Therefore, it comes as no surprise that temperature measurement technology is used across all industries. This warrants meeting a wide variety of customer requirements. Endress+Hauser rises to the challenge with full application support from the planning stage to installation and operation.

Different processes require different solutions. Let us assure you that Endress+Hauser can meet your requirements.

3

From power supply to field devices including... • Recorders• Components• Displays

All products and components are designed so they are not only simple to install, but easy to operate as well. From temperature sensors and transmitters to thermowells and accessories such as power supplies, displays, recorders, etc. can be purchased from one company.

On-site calibrationEndress+Hauser operates calibration facilities around the world and employs mobile equipment that enables on-site calibration for:• Pressure and Temperature• Level• Flow• Liquid Analysis

Temperature assemblies with calibration certificate

Simplified model structuresEndress+Hauser’s philosophy makes it easy to configure a model.

• Configure a model structure to specify probes, transmitters, thermowells as a single line item

• Wide variety of industrial thermowells, enclosures and lead-wire style to meet your design and plant requirements

• The units are delivered assembled together, tested and installation ready: straight out of the box

• Top performing solutions over the long run. Low cost of long-term ownership

We run the necessary cyclic calibration of measurement points following national regulations or individual operating systems. This is done either at the manufacturer’s factory, locally or in our NIST accredited and internationally recognized temperature test laboratory. From ‘simple’ requirements up to safety-critical GMP applications in the pharmaceutical, chemical or power industries, calibration is always traceable to national and international standards.

Clearly defined standard operating procedures, exact operation and documented proof offer excellent results. Endress+Hauser will support you in completing the qualification and validation of your plant and instrumentation, leaving you to concentrate on the efficient and profitable running of your plant.

RIA45 Process temperature display

0Prosonic MFMU40

RN221N

PLC/Recorder

RIA141 Digital field display

4

From micro to macro

High tech in detailIn clean rooms and over dozens of process steps, platinum traces 100 times thinner than a human hair are transferred onto high-quality ceramic substrata using semiconductor technology. They are trimmed using lasers, thermally aged and protected from pollutant penetration by a glass layer.

Mastered varietyDifferent processes require different solutions.

Be assured that Endress+Hauser knows your requirements. • From the choice of materials to the finished product • From plastics, ceramics and glass to alloyed special steels and

precious metals • From perfectly hygienic processed surfaces up to 3D

measurement systems in reactors and pressurized vessels• From the smallest primary sensor to the multi-point sensor

assembly

Worldwide, from micro to macro, always at the right place at the right time.

Just a few micro-grams of highly purified precious metals are the beginning of precise temperature measurement. Modern production processes use semiconductor technology to make the production of the smallest and long-term stable thin film sensors for resistance sensor assemblies possible.

Securely packaged precision A sensor element, whether it is a sensor assembly or thermocouple, can only measure the temperature to which it is subjected.

The perfect combination of the measuring element using a variety of materials, proven thermowell construction and extremely accurate transmitters guarantee the highest plant availability. The construction of the complete measurement point fulfills international regulations, defies rough process conditions and offers outstanding measurement qualities.

Miniature transmitter for compact sensor assemblies.

Head transmitter technology for the smallest spaces.

3 mm

5

Modern temperature switch - versatile functions with simple operation.

Perfect combination The transformation of temperature-dependent voltage or resistance values plays a fundamental role in the measurement chain. Leading edge, automated production methods and logistics concepts demonstrate the capability of Endress+Hauser, a world leader in the supply of head transmitters. The available portfolio ranges from top hat DIN rail devices to field transmitters and miniature electronics to innovative multi-channel transmitters. Modern electronics supervising the measurement chain using all the most common fieldbus systems contribute to the increased safety of the plant.

The complete solution includes guaranteed compatibility with all systems on the market, high safety, minimization of inaccurate measurements deviations and simple commissioning. From the primary sensor to the measurement in the system, solutions from one supplier - temperature measurement technology from Endress+Hauser.

Protection is the prime consideration when designing field housings.

Temperature assembly with FM XP sensor for offshore/hazardous area installation.

Complete assembly ready to install.

SpecificationAttention to compliance with international norms and standards is already evident at the sensor assembly specification. To this end, Endress+Hauser collaborates actively in international standardization and thus represents the interests of our customers.

Modern designThe most up-to-date tools for the mechanical construction calculation of the sensor assembly are used at the design stage. For example, ‘finite elements’ can calculate the stability and temperature trend thereby giving an early warning of any potential weak points.

Temperature is the most frequently measured parameter in process automation. This means that the many temperature devices produced must fulfill consistently high quality with the best delivery performance. Endress+Hauser offers outstanding quality that is precisely executed. It is the result of proven processes and active quality consciousness. Continuous quality awards confirm the excellent quality.

For premium quality products you need highly motivated and qualified employees. The Best Places to Work award in 00 for our production, services, marketing and sales facility in Greenwood, Indiana confirms our dedication to employees, and more importantly affirms our employees’ loyalty to Endress+Hauser.

Computer simulation showing the sensor assembly tip formation in a process.

Traceable productionProduction is ISO9000 certified. Due to the high number of sensor assemblies produced, special focus is on the traceability of the materials used and the production steps. Every single device can be traced to the serial number level. Endress+Hauser offers its customers this information as an open platform for operating supplies management on the Internet.

Quality and quantity

Radiographic tests verify the precise construction of measurement inserts and the quality of the welding processes.

Visual quality control of internal welded seams on smooth transitions.

The integrity of thermowells at high pressures is guaranteed by hydrostatic testing.

Load test in the annealing furnace at over 183°F (1000°C).

Positive material identification (PMI)

Complete tests and certificationAdditional post-production tests confirm the excellent quality of the sensor assemblies. Endress+Hauser automatically runs numerous tests for verification of the design and the production process. The tests with detailed documentation are also offered as a service to our customers. Every sensor assembly can be thoroughly checked before delivery.

Tests on sensors include:

• Calibration - asccuracy• Resistance• Insulation resistance• Time response• Thermal shock• Dielectric strength• Vibration• Shock

To guarantee quality of thermowells, the following tests are possible:

• Radiography• Dye penetration• Hydrostatic• Helium leak• Positive material identification/ chemical analysis

8

Explosion proof sensor assemblies

ApprovalsFor oil and gas, hydrocarbon and petrochemical industries

• FM (USA), CSA (Canada)• CE Mark (EMC, Low Voltage Equipment Guideline)• Explosion proof approval for installation in Class 1, Div. 1• NAMUR NE 43• SIL

1 2 4 â 0

True safety for hazardous area measurementsComplete thought in design When it comes to safety of plant equipment and human life, make no compromises! Failures in hazardous areas are dangerous and can lead to injury and/or loss of life or property. Simply connecting a sensor to an explosion proof enclosure does not make a temperature assembly explosion proof. For true safety, the whole assembly and each component must be properly designed and rated.

Documented safetyFM/CSA dictates special requirements to ensure plant and personnel safety. We not only meet these specifications but also provide documentation to authenticate it. We take extra care for your safety and peace of mind.

More safety, reliability and productivityWhen your production is down, your competition is catching up! To further enhance safety, reliability and plant availability we recommend the SIL rated TMT1 with dual elements.

TMT1 ensures constant monitoring of the measuring element and even auto switch over to backup sensor. This combination substantially reduces risk and increases plant productivity.

Approved accessoriesIntrinsically safe barriers, transmitters and explosion proof loop powered displays complete the offering for the hazardous area measurement points.

TMT 142

9

T13 / T53

T14 / T54

T15 / T55

Description Measurement probe Measurement range Process connection Connection head

T13: Explosion proof certified RTD assembly in thermowell with spring loaded insert and enclosure for process industry. Transmitter optional.

Pt100, Class A or B, single or dual, thin film or wire wound. Standard material is SS31L, special materials and others available.

-58 to +39°F(-50 to +00°C)

-38 to +111°F(-00 to +00°C)

Threaded, weld in, socket weld

Aluminum, stainless steel, NEMA 4X

T53: Explosion proof certified thermocouple assembly in threaded thermowell with spring loaded insert and enclosure for process industry. Transmitter optional.

E, J, K, N, T and special types. 31SS or Inconel 00. Special materials and others available. Grounded or ungrounded junctions.

-454 to +500°F(-0 to +1000°C)




T14: Explosion proof certified RTD assembly in flanged thermowell with spring loaded insert and enclosure for process industry. Transmitter optional.


-58 to +39°F(-50 to +00°C)

-38 to +111°F(-00 to +00°C)

Flanged, half and full penetration type with standard and high pressure ratings


T54: Explosion proof certified RTD assembly with spring loaded insert and enclosure for process industry. For retrofit in existing thermowell. Transmitter optional.


-454 to +500°F(-0 to +1000°C)




T15: Explosion proof certified RTD assembly with spring loaded insert and enclosure for process industry. For retrofit in existing thermowell. Transmitter optional.


-58 to +39°F(-50 to +00°C)

-38 to +111°F(-00 to +00°C)

Lamination Hex nipple or Nipple union nipple


T55: Explosion proof certified thermocouple assembly with spring loaded insert and enclosure for process industry. For retrofit in existing thermowell. Transmitter optional.

E, J, K, N, T and special types. 31SS or Inconel 00. Special materials and others available. Grounded or ungrounded junctions

-454 to +500°F(-0 to +1000°C)

Lamination Hex nipple or Nipple union nipple


10

Direct probe temperature assemblies

Full range supplierEndress+Hauser offers a complete family of full range ¼” diameter probes including hermetically sealed compact designs with built-in 4 to 0 mA loop powered transmitters.

Choices without compromisesOur range includes single/dual element RTDs and thermocouples, with all types of connectors and enclosures (with or without head mounted transmitters). These have been built for the needs of the process industries to withstand the challenges of industrial environments.

AccessoriesOur range of components include power supplies, barriers, temperature displays and recorders. This allows you to design and purchase a complete measurement point.

ApplicationsWe serve a wide range of industries and applications in both processes and labs such as:• HVAC systems and heat exchangers• Ovens and heat testing equipment• Industrial and commercial chillers• Freezers and heat treatment processes• Machine and bearing temperature monitoring

T1Q

T2

TMT162

Calculation of the water heat quantity and water-heat differential from the input variables for flow (Q) and the temperature differential (T1 - T) using TMT1 and flow computer RMS1

Compact transmittersReduced complexity, increased reliabilityThe newest generation of compact transmitters TSM40G offers a unique loop powered device to reduce installation cost and improve measurement speed and accuracy.

A four-wire fast response Pt100 RTD is combined with a self contained electronic transmitter as one complete part to give a unique, reliable and compact measurement point. Just run the loop from your PLC straight to the quick disconnect plug.

RIA50RSG30

11

TH11/TH51

TH12

TH52

TH56

Description Measurement probe Measurement range Process connection Enclosure

TH11: General purpose RTD assembly with enclosure for process and laboratory application. Transmitter optional.

Pt100, Class A or B, thin film or wire wound. Standard material is SS31L, special materials and others available.

-58 to +39°F(-50 to +00°C)

-38 to +111°F(-00 to +00°C)

Threaded, compression fitting one time or re-adjustable

Aluminum, polypropylene,stainless steel, NEMA 4X

TH51: General purpose MgO insulated thermocouple assembly with enclosure for process and laboratory application. Transmitter optional.


-454 to +500°F(-0 to +1000°C)

Threaded, compression fitting one time or re-adjustable



TH1: General purpose RTD assembly with cable

Pt100, Class A or B, thin film or wire wound. Standard material is SS31L, special materials and others available.

-58 to +39°F(-50 to +00°C)

-38 to +111°F(-00 to +00°C)

Compression fitting one time or re-adjustable

None, connection cable with standard, mini, or high temperature terminal plug or flying leads

TH5: General purpose MgO insulated thermocouple assembly with cable


-454 to +500°F(-0 to +1000°C)

Compression fitting one time or adjustable

None, connection cable with standard, mini, or high temperature terminal plug or flying leads

TH5: General purpose MgO insulated thermocouple assembly with plug.


-454 to +500°F(-0 to +1000°C)

Compression fitting one time or adjustable

None, standard, mini, or high temperature terminal plug or flying leads


TSM40G: Compact RTD fully sealed assembly with built-in transmitter. Loop powered, 4-0mA output. PC programmable.

4-wire Pt100, class A sensor, 31SS

-0 to +30°F(-51 to +10°C)

Threaded Hermetically sealed stainless steel compact enclosure with built in transmitter. M1 connector.TSM470G

1

Industrial RTD and thermocouple assemblies

Spring loaded assemblies with or without thermowellsYour process need is our guidelineEndress+Hauser offers spring loaded assemblies carefully designed to fit industrial process applications. Our easy to use product structure allows you to quickly select the right, complete assembly.

Best in class sensorsWe offer both RTD and thermocouples with single and dual elements. See the adjacent page for the available options.

High quality transmittersTransmitters eliminate many errors in the measurement, reduce costs and improve overall measurement quality. Smart transmitters even offer advanced diagnostics such as corrosion detection and drift alarm. Our transmitters are produced in-house to the highest quality standards in the industry.

Completely matched assemblies, more accuracy for your money!The transmitter-sensor matching drastically reduces the error in a measurement. Sensing elements are never identical and thus accuracy can be enhanced by exactly matching the sensor curve to the transmitter. This is useful for processes where accuracy in temperature measurement is critical to final product quality.

Tested thermowells, made to high standardsEndress+Hauser supplied thermowells are designed and made to the highest quality and safety standards from solid bar stock. Process connections available are:• Flanged• Welded• Threaded

Standard material of construction is 31 stainless steel, and for corrosive environments, special materials such as Titanium, Hastelloy® C, Inconel® 00, Monel® as well as Protective sleeves such as Tantalum can be supplied, and ceramics are available.*

Reduce cost of installation!Making it easy and cost effective for you is one of our primary goals. When you order an assembly from us, you get it ready to install. No assembling and configuring required on site!• One easy to configure part number including sensor,

enclosure, transmitter (if required) thermowell (if required)

• Standard or special testing and calibrations• Preconfigured and ranged transmitters• Sensor and/or transmitter calibration• Complete documentation and certification• Device configuration drivers and PC configuration

software

1 2 4 â 0

Hastelloy® is a registered trademark of Haynes International.Inconel® is a registered trademark of Special Metals Corporation.Monel® is a trademark of Special Metals Corporation.

13

TH14

TH54

TH15

TH55


TH13: RTD assembly in thermowell with spring loaded insert and enclosure for process industry. NI / IS / GP Transmitter optional.


-58 to +39°F(-50 to +00°C)

-38 to +111°F(-00 to +00°C)



TH53: Thermocouple assembly in thermowell with spring loaded insert and enclosure for process industry. NI / IS / GP Transmitter optional.


-454 to +500°F(-0 to +1000°C)




TH14: RTD assembly in flanged thermowell with spring loaded insert and enclosure for process industry. NI / IS / GP Transmitter optional.


-58 to +39°F(-50 to +00°C)

-38 to +111°F(-00 to +00°C)



TH54: Thermocouple assembly in flanged thermowell with spring loaded insert and enclosure for process industry. NI / IS / GP Transmitter optional.


-454 to +500°F(-0 to +1000°C)




TH15: RTD asembly with spring loaded insert and enclosure for process industry. For retrofit in existing thermowell. NI / IS / GP Transmitter optional.


-58 to +39°F(-50 to +00°C)

-38 to +111°F(-00 to +00°C)

Hex nipple or Nipple union nipple


TH55: Thermocouple assembly with spring loaded insert and enclosure for process industry. For retrofit in existing thermowell. NI / IS / GP Transmitter optional.


-454 to +500°F(-0 to +1000°C)

Hex nipple or Nipple union nipple


Industrial

TH13

TH53

14

Temperature assemblies designed for sanitary environments

TSM40Fcompacttransmitter

TSM40Pcompact transmitter

Beyond the instrumentEndress+Hauser is a full-line supplier of solutions for sanitary process measurements. The designs meet the most stringent requirements of the food and beverage/pharma/bio-tech industries for safety and reliability. We offer the necessary process connections, materials, surface finish, etc. required for optimal safety and process integration.

Surface finishIn industry branches, such as food and beverage, a defined surface roughness is required to fulfill the legal requirements of hygienic applications. Using electro polishing a surface finish value Ra of 15-0 µin of the wetted surface can be achieved.

Industry in focusOur instruments are designed with strict compliance to the V-model and cGMP recommendations. We have third party approvals for 3-A compliance and even offer PMO required sensor response time (TH1).

Our flow through sensor (TR4) is designed for use on specialty applications in small pipe skids and processes requiring non obstructive measurement.

Specialty enclosures made from 31L stainless steel and FDA listed polypropylene are available.

The range of products and services will convince you that we are the experts you can trust for your stringent sanitary requirements.

Specialty sensorTR4

TSM40 Easytemp compact temperature transmitters combine a four-wire Pt100 Class A RTD with the analog output of a transmitter offering an economical and technical alternative to unreliable direct wiring to the control room.

Sanitary enclosuresTA20J stainless steel enclosure for transmitter or terminal block • Head transmitter stainless steel housing• With or without local display• Plastic Lexan window• 31L SS resistant to cleaning agents and corrosions

TMT162 with T17 housing 31L SS dual compartment housing with fully potted electronics• Lexan window with reinforced mounting• Gold plated terminals• Blue backlit display• Hygienic design• ASME/PMO assemblies available

Higher plant availabilityThe transmitter has dual inputs and automatically switches to a backup sensor. This feature can avoid potentially expensive shutdowns due to failure of one sensor during a batch process. In combination with the TH, you can even replace sensors without interruption to the process.

â

15

TH17

TH18


TSM40F: Compact RTD, meets 3-A standard surface finish requirements. Built-in transmitter. Loop powered, 4-0mA output. PC programmable.

4-wire Pt100, class A sensor. Surface finish Ra < 3 micro-inch (150 grit).Polished, CSA/UL

-0 to +30°F(-51 to +10°C)

Tri-Clamp 1” to ” Hermetically sealed stainless steel compact enclosure with built-in transmitter. M1 connector.

TSM40P: Compact RTD, meets ASME BPE, Bio processing standard surface finish requirements. Built-in transmitter. Loop powered, 4-0mA output. PC programmable.

4-wire Pt100, class A sensor. Surface finish Ra < 0 micro-inch (40 grit) electro polished.CSA/UL

-0 to +30°F(-51 to +10°C)

Tri clamp ½” to ¾” Hermetically sealed stainless steel compact enclosure with built-in transmitter. M1 connector.TSM470F

TSM470P

TH27


TH1: RTD assembly with sanitary 1” to 3” Tri-Clamp connection and enclosure for sanitary applications. Transmitter optional.

Meets 3-A standards.PMO requirements optional.

Pt100, Class A sensor, standard material is SS31L. Standard or reduced tip for fast response.Surface finish Ra < 3 micro-inch accordance with 3-A.

-58 to +39°F(-50 to +00°C)

Tri-Clamp® 1” to 3”

Aluminum, polypropylene,(FDA compliant)stainless steel,NEMA 4X

TH18: RTD assembly with sanitary ½” to ¾” Tri-Clamp connection and enclosure for sanitary applications. Transmitter optional.

Meets ASME BPE requirements

Pt100, Class A sensor, standard material is SS31L. Surface finish < 0 micro-inch accordance with ASME BPE, Bio processing standard.

-58 to +39°F(-50 to +00°C)

Tri-Clamp ½” to ¾”

Aluminum, polypropylene,(FDA compliant)stainless steel,NEMA 4X

TH: RTD assembly with thermowell; sanitary; 1” to 3” Tri-Clamp connection. Transmitter optional.

3-A or ASME BPE surface finish

Pt100, Class A sensor, standard material is SS31L. Surface finish Ra < 0 micro-inch accordance with ASME BPE. Bio processing standard Ra < 3 micro-inch accordance with 3-A.

-58 to +39°F(-50 to +00°C)

Tri-Clamp 1” to 3” Aluminum, polypropylene,(FDA compliant)stainless steel,NEMA 4X

Tri-Clamp® is a registered trademark of Ladish Co., Inc., Kenosha, Wisconsin

1

Transmitters: high quality, leading edge technology

Protection and simplicity is the prime consideration when designing field housings.

TMT1Designed to perform and built to last!TMT1 is an advanced, extremely rugged transmitter with very high accuracy. It is convenient to install and highly reliable and safe in operation!

Salient features:• Dual compartment housing and fully potted electronics• Blue backlit display (optional). Large digits, visible in the dark or

in direct sunlight • Bar graph and fault condition indication for ease of reading• Universal input for reduced inventory• Dual sensor input capability • 4 to 0 mA, HART, FOUNDATION Fieldbus output options• Galvanic isolation kV

Advanced features:• SIL , for highest safety to your measurement point• Sensor backup, avoids otherwise costly unplanned shutdowns • Drift alarm, to enable a quick maintenance intervention• Min./max. value log • Terminal corrosion detection• Differential temperature or averaging temperature functions for

energy applications• Multi-channel (+4) display function with FOUNDATION

Fieldbus communication option • Optional, stainless steel housings for hygienic or EEx D

application

Easy installation:• Operation, visualization and maintenance with PC, e.g. using

Fieldcare™ software, AMS, PDM • Full support for DTM FDT configuration• HART® support for handhelds• Output simulation for a quick and easy check of the loop

Approvals:• FM and CSA (IS, NI, XP and DIP)• ATEX (EEx ia, EEx nA, EEx d and dust-Ex)

TMT14A field transmitter at a competitive price:• Explosion proof and intrinsically safe

approvals• Single compartment housing

Head mounted (hockey puck) transmitters:• Fully potted electronics• Advanced diagnostic features

DIN rail • Universal models or economical

RTD/TC • Slim line housing option for

saving space

1

Head transmittersModel TMT180 TMT181 TMT182 TMT184 TMT187 TMT188

Special features Low cost, accurate PC interface, universal

HART® interface, SIL, universal

PROFIBUS®-PA, universal

Low cost, fixed range, for Pt100

Low cost, fixed range, for thermocouples

Measurement type Pt 100 RTD/TC/Ω/mV RTD/TC/Ω/mV RTD/TC/Ω/mV Pt 100 TC

Design

Communication interface

- -

Number of inputs 1 1 1 1 1 1

RTD input Pt50/100 Cu50/100

Pt50/100/500/1000, Ni100/500/1000 Cu50/100

Pt100, Pt500, Pt1000, Ni100, Ni500, Ni1000

Pt100, Pt500, Pt1000, Ni100, Ni500, Ni1000

Pt100 -

TC input - B, C, D, R, S, E, J, K, L, N, T, U

B, C, D, R, S, E, J, K, L, N, T, U

B, C, D, R, S, E, J, K, L, N, T, U

- B, C, D, R, S, E, J, K, L, N, T, U

Ω input -- 10 to 2000 Ω 10 to 2000 Ω 10 to 2000 Ω - -

mV input - -10 to 100 mV -10 to 5 mV -10 to 5 mV - -

Accuracy (Pt100, -58 to +392°F/-50 to +200°C)

≤0.1 K / 0.08 %(Option)

≤0.2 K ≤0.2 K ≤0.15 K ≤0.2 K -

Output 4 to 0 mA0 to 4 mA

4 to 0 mA0 to 4 mA

4 to 0 mA0 to 4 mA

PROFIBUS®-PA 4 to 0 mA 4 to 0 mA

Power supply (DC) 10 to 35 V 8 to 35 V 11.5 to 35 V Powered by PROFIBUS®-PA

8 to 35 V 8 to 35 V

Galvanic isolation 26 - Yes Yes Yes Yes Yes

Rail mounted Field transmittersModel TMT121/122 TMT127/128 RIT261 TMT162 TMT142

Special features PC interface/HART® interface, SIL, universal

For Pt100/for thermocouples fixed range, low cost

Field display with built-in head transmitter

Safe, illuminated display, compartment housing, SIL , universal

Safe, illuminated display, universal

Measurement type RTD/TC/Ω/mV Pt100/TC RTD/TC/mV RTD/TC/Ω/mV RTD/TC/Ω/mV

Design

Communication interface

-

Number of inputs 1 1 1 1

RTD input Pt100/500/1000 Ni100/500/1000

Pt100/500/1000 Ni100/500/1000

Pt100/500/1000 Ni100/500/1000

Pt50/100/00/500/1000 Ni100/10/500/1000 Cu10/50/100

Pt50/100/00/500/1000 Ni100/10/500/1000 Cu50/100

TC input B, E, J, K, N, R, S, T, C, D, L, U

B, E, J, K, N, R, S, T, C, D, L, U

B, C, D, E, J, K, L, N, R, S, T, U

B, C, D, R, S, E, J, K, L, N, T, U B, E, J, K, N, R, S, T, C, D, L, U

Ω input 10 to 400 Ω, 10 to 2000 Ω

- 10 to 400 Ω, 10 to 2000 Ω

10 to 2000 Ω 10 to 400 Ω, 10 to 2000 Ω

mV input -10 to 100 mV - -10 to 5 mV -0 to 100 mV -0 to 100 mV

Accuracy (Pt100, -58 to +392°F/-50 to 200°C)

≤0.2 K ≤0.2 K ≤0.2 K ≤0.15 K ≤0.2 K (≤0.2 K)

Output 4 to 0 mA 0 to 4 mA

4 to 0 mA 0 to 4 mA

0/4 to 0 mA 0 to 0/4 mA

4 to 0 mA 0 to 4 mAFOUNDATION® Fieldbus

4 to 0 mA 0 to 4 mA

Power supply (DC) 1 to 35 V 1 to 35 V 1,5 to 35 V (loop powered) 11 to 40 V(8.5 V without display)

11 to 40 V(8 V without display)

Galvanic isolation 26 Yes Yes Yes Yes Yes

18

North American production and support

SupportEngineering supportIn addition to a wide range of standard temperature sensors, process plants often require customized temperature solutions, along with technical documentation and test certification.

Working closely with a customer, we can provide optimum solutions for any special measurement needs – from a single device to large plants with more than 1000 measurement points.

Technical supportThe tech support team can answer your technical questions. Our specialists offer knowledge and advice so that:

• The diagnosis is clear• The possible need for field service can be avoided• The instruments and software tools are correctly

implemented• Your maintenance is improved

A dedicated phone line and a system that records your calls ensures reliability, traceability and efficiency.

Factory repairAt our production facilities, we offer technical checks, preventative maintenance and repair followed by functional tests and calibration in our accredited laboratories. Many schemes are possible (with fixed prices known in advance) which also help you to save time on administration. We also offer ‘Expedited Repair and Calibration’ services that provide a quicker turnaround.

Production close to the marketTo meet international requirements and regulations means to take these into account at the product design stage.

We develop powerful product concepts, production concepts and logistics concepts for our customers. A competence center optimized on efficiency and quality consistently develops the central components of Endress+Hauser temperature measurement:• primary sensor• electronics• software • mechanical precision parts

On-line supportHelp is never more than a few clicks away. On-line support provides the following support services: • Order status • Shipment tracking• Product selection• Help from our technical support team• Start-up assistance• Return authorizations for factory repair

To access these services, simply visit: www.us.endress.com/us_assistance

19

All around service throughout the plant life cycleA full service portfolioEndress+Hauser offers a broad range of services focused on industrial measurement and process automation. From highly specific tasks like startup or calibration to full maintenance packages like our comprehensive Instrument Management Solutions (IMS), our Service Support is well structured to supply whatever is required.

Services

FieldCare: One tool – all devicesFieldCare is Endress+Hauser’s FDT based Plant Asset Management Tool. It can configure all intelligent field devices in your plant and supports you in managing them. By using status information, it also provides a simple but effective means of checking their health.

Maintenance contractsAn evolving range of maintenance contracts with inclusive guarantees enable Endress+Hauser to consistently provide you with the appropriate level of support, offering you total peace of mind and better control of operational costs. Within the scope of our contracts, we can cover a wide range of activities from simple checkup to calibration of quality critical equipment.

Field ServiceOur team of factory trained technicians are available for situations of breakdown and on-site repair.

At their disposal are specialized tools that help them provide fast and efficient diagnosis and repair.

W@M: Managing and using informationFieldCare is a key component of W@M (Web-enabled Asset Management), a program suite offering service and support throughout the life cycle. It connects to various Endress+Hauser databases via W@M and offers other Instrument Management programs as plug-ins, for example:

• Common Equipment Record (CER) allows all manufacturer device data to be called up by entering the serial number

• Spare Part Finder (SPF) allows you to identify and order spare parts on-line

• Installed Base Analyst (IBA) provides a complete record of all the devices in your plant together with a risk analysis and other important maintenance documents

ReadWin® 2000Quick PC based programming tool free of charge.

FA 00T/4/ae/01.0US/INDD CS

01.0/SCUSA

Endress+Hauser’s product portfolio

USA

Endress+Hauser, Inc.350 Endress PlaceGreenwood, IN 4143Tel: 31-535-138Sales: 888-ENDRESSService: 800-4-83Fax: [email protected]

Canada

Endress+Hauser Canada105 Sutton DriveBurlington, ON LL 5Z8Tel: 905-81-99800-8-3199Fax: 905-81-9444www.ca.endress.com

Mexico

Endress + Hauser México, S.A. de C.V.Av. Gustavo Baz No. 43Fracc. Bosques de EchegarayNaucalpan de Juárez, C.P. 53310, Estado de MéxicoMéxicoPhone: (5) 55-531-1110Fax: (5) 55-531-118E-mail: [email protected]

International

For international locations visit: www.endress.com/worldwide

www.us.endress.com/e-direct• Shop on-line for low-cost

instruments, devices and components

• Capacitance (RF) • Conductive • Mechanical• Vibration• Ultrasonic• Radar• Guided radar (TDR)• Hydrostatic

Level

• Gauge/absolute• Differential pressure• Hydrostatic

Pressure

• Electromagnetic• Vortex shedding• Coriolis mass flow• Ultrasonic • Open channel • D/P flow

Flow

• Temperature transmitters• RTDs/thermocouples • Sensors

Temperature

• Conductivity• pH/ORP• Chlorine• Dissolved oxygen• Turbidity• Chemical analyzers• Nitrate/organic sensors• Sludge level

Liquid Analysis

• Paperless recorders• Visual data managers• Safety data managers

Recorders

• Displays• Active barriers• Process transmitters• Power supplies

Components

• Start-up • Training • Calibration • Maintenance Contracts• Instrument Management Solutions

Service

Date post:	27-Sep-2020
Category:	Documents
Upload:	others
View:	3 times
Download:	0 times

Temperatureshop.forberg.com/customer/forsci/customerpages/pdf/... · Transmitters iTEMP®...

Documents