218 219 see page 476 for coordinated accessories Play with the Room Designer VINYL LVT iD ESSENTIAL 30 iD ESSENTIAL 30 XL Woods Main Product Features • Best value for money • Resistant product with 0.30mm transparent wear-layer • TopClean surface protection for great resistance and easy cleaning Surface Treatment Sustainability Tag Recyclable 100% (1) *except recycled content * Better Indoor Air Quality *TVOC AT 28 DAYS < 100μg/m 3 (1) Progressively for all our professional vinyl products during 2014 Logistics Information Available in planks 22.9 x 121.9cm 15,2 x 91,4cm Laying direction: General Information iD Essential 30 EN 14041:2004 Distributed by: Tarkett SA 08203 Sedan - FRANCE 0120-043DoP-2013-04 http://professionals.tarkett.com According to European Classification ISO 10874 (EN 685) DF Smoked Oak Black Brown Natural Dark Grey Light Grey 3977 000 3977 001 3977 002 3977 003 3977 004 Soft Oak White Black Brown Natural Beige 3977 005 3977 006 3977 007 3976 007 3977 008 3976 008 3977 009 3976 009 Light Grey White Light Beige Light Brown 3977 010 3976 010 3977 011 3977 015 3977 012 Aspen Oak Natural 3977 016 Grey 3977 012 3976 012 Soft Oak - Beige Beige 3977 013 TECHNICAL DATA STANDARDS iD Essential 30 Classification Classification ISO 10874 (EN 685) domestic commercial Classes: 23 32 Characteristics Total thickness ISO 24346 (EN 428) 2.00mm Wear layer thickness ISO 24340 (EN 429) 0.30mm Total weight ISO 23997 (EN 430) 3 400g/m 2 PUR treatment - TopClean Abrasion group EN 660-2 Group T: ≤ 2mm³ Technical performances Residual indentation Average measured value ≤ 0.10mm ISO 24343-1 (EN 433) requirement Reaction to fire EN 13501-1 ASTM E648 B fl s1 glued over A2 fl or A1 fl substrate (concrete) Slip resistance DIN 51130 EN 13893 R9 Dimensional stability ISO 23999 (EN 434) ≤ 0.25% Furniture leg EN 424 No damage Castor wheel test ISO 4918 (EN 425) No damage Curl resultant to heat ISO 23999 (EN 434) ≤ 2.00mm Electrostratic properties EN 1815 EN 1081 < 2 kV on concrete R1 > 10 9 ohms Chemical resistance ISO 26987 (EN 423) Good resistance Hygiene - Does not contribute to infection spreading Thermal resistance Underfloor heating EN ISO 10456 0.07m 2 K/W Suitable - max. 27°C Light fastness EN ISO 105-B02 ≥ 6 The above information is subject to modifications for the benefit of further improvement (01/2014). For more detailed technical information, please contact Tarkett.
Transcript
218 219see page 476 for coordinated accessories
Play with the Room Designer
Vinyl
lVt
iD ESSENTIAL 30 iD ESSENTIAL 30 XL Woods
Main Product Features• Best value for money
• Resistant product with 0.30mm transparent wear-layer
• TopClean surface protection for great resistance and easy cleaning
Surface Treatment
Sustainability Tag
Recyclable
100%
(1)
* except recycled content
*
Better IndoorAir Quality
*TVOC AT 28 DAYS
< 100 µg /m3
(1) Progressively for all our professional vinyl products during 2014
Logistics Information
Available in planks
22.9 x 121.9cm 15,2 x 91,4cm
Laying direction:
General InformationiD Essential 30
EN 14041:2004
Distributed by: Tarkett SA 08203 Sedan - FRANCE
0 1 2 0 - 0 4 3 D o P - 2 0 1 3 - 0 4 http://professionals.tarkett.com
According to European Classification ISO 10874 (EN 685)
DF
Smoked Oak
Blac
k
Brow
n
Natu
ral
Dark
Gre
y
Ligh
t Gre
y
3977 000 3977 001 3977 002 3977 003 3977 004
Soft Oak
Whi
te
Blac
k
Brow
n
Natu
ral
Beig
e
3977 005 3977 006 3977 007
3976 007
3977 008
3976 008
3977 009
3976 009
Ligh
t Gre
y
Whi
te
Ligh
t Bei
ge
Ligh
t Bro
wn
3977 010
3976 010
3977 011 3977 015 3977 012
Aspen Oak
Natu
ral
3977 016
Grey
3977 012
3976 012
Soft Oak - Beige
Beig
e
3977 013
TECHNICAL DATA STANDARDS iD Essential 30
Classification
ClassificationISO 10874 (EN 685)domestic commercial
Classes:2332
Characteristics
Total thickness ISO 24346 (EN 428) 2.00mm
Wear layer thickness ISO 24340 (EN 429) 0.30mm
Total weight ISO 23997 (EN 430) 3 400g/m2
PUR treatment - TopClean
Abrasion group EN 660-2 Group T: ≤ 2mm³
Technical performances
Residual indentationAverage measured value
≤ 0.10mmISO 24343-1 (EN 433) requirement
Reaction to fire EN 13501-1ASTM E648
Bfl s1 glued over A2fl or A1fl substrate
(concrete)
Slip resistance DIN 51130EN 13893 R9
Dimensional stability ISO 23999 (EN 434) ≤ 0.25%
Furniture leg EN 424 No damage
Castor wheel test ISO 4918 (EN 425) No damage
Curl resultant to heat ISO 23999 (EN 434) ≤ 2.00mm
Electrostratic properties EN 1815EN 1081
< 2 kV on concreteR1 > 109 ohms
Chemical resistance ISO 26987 (EN 423) Good resistance
Hygiene - Does not contribute to infection spreading
Thermal resistance Underfloor heating EN ISO 10456 0.07m2 K/W
Suitable - max. 27°C
Light fastness EN ISO 105-B02 ≥ 6
The above information is subject to modifications for the benefit of further improvement (01/2014).
For more detailed technical information, please contact Tarkett.
220 221see page 476 for coordinated accessories
Play with the Room Designer
Vinyl
lVt
iD ESSENTIAL 30 iD ESSENTIAL 30 XL Woods + EIR XL Woods
Main Product Features• Best value for money
• Resistant product with 0.30mm transparent wear-layer
• TopClean surface protection for great resistance and easy cleaning
• Large oak and pine designs choice
• Emboss in register (see selection marked with *EIR)
Surface Treatment
Sustainability Tag
Recyclable
100%
(1)
* except recycled content
*
Better IndoorAir Quality
*TVOC AT 28 DAYS
< 100 µg /m3
(1) Progressively for all our professional vinyl products during 2014
Logistics Information
Available in planks
22.9 x 121.9cm
Laying direction:
General InformationiD Essential 30
EN 14041:2004
Distributed by: Tarkett SA 08203 Sedan - FRANCE
0 1 2 0 - 0 4 3 D o P - 2 0 1 3 - 0 4 http://professionals.tarkett.com
According to European Classification ISO 10874 (EN 685)
DF
Cerused Oak - Beige
Washed Pine
Whi
te *
EIR
Beig
e *E
IR
Ligh
t Bro
wn
*EIR
Snow
*EI
R
Blue
*EI
R
24707 004 24707 005 24707 006 24707 007 24707 008
Cerused Oak Colored Pine
Beig
e *E
IR
Ligh
t Bro
wn
*EIR
Brow
n *E
IR
Grey
Greg
e
24707009 24707 010 24707 011 3977 022 3977 023
Primary Pine
Dark
Bro
wn
Greg
e
Dark
Gre
y
Whi
te
Natu
ral
3977 017 3977 018 3977 019 3977 021 3977 020
Country Oak
Brow
n *E
IR
Grey
*EI
R
Natu
ral *
EIR
24707 000 24707 003 24707 002
Beig
e *E
IR24707 001
TECHNICAL DATA STANDARDS iD Essential 30
Classification
ClassificationISO 10874 (EN 685)domestic commercial
Classes:2332
Characteristics
Total thickness ISO 24346 (EN 428) 2.00mm
Wear layer thickness ISO 24340 (EN 429) 0.30mm
Total weight ISO 23997 (EN 430) 3 400g/m2
PUR treatment - TopClean
Abrasion group EN 660-2 Group T: ≤ 2mm³
Technical performances
Residual indentationAverage measured value
≤ 0.10mmISO 24343-1 (EN 433) requirement
Reaction to fire EN 13501-1ASTM E648
Bfl s1 glued over A2fl or A1fl substrate
(concrete)
Slip resistance DIN 51130EN 13893 R9
Dimensional stability ISO 23999 (EN 434) ≤ 0.25%
Furniture leg EN 424 No damage
Castor wheel test ISO 4918 (EN 425) No damage
Curl resultant to heat ISO 23999 (EN 434) ≤ 2.00mm
Electrostratic properties EN 1815EN 1081
< 2 kV on concreteR1 > 109 ohms
Chemical resistance ISO 26987 (EN 423) Good resistance
Hygiene - Does not contribute to infection spreading
Thermal resistance Underfloor heating EN ISO 10456 0.07m2 K/W
Suitable - max. 27°C
Light fastness EN ISO 105-B02 ≥ 6
The above information is subject to modifications for the benefit of further improvement (01/2014).
For more detailed technical information, please contact Tarkett.
222 223see page 476 for coordinated accessories
Play with the Room Designer
Vinyl
lVt
iD ESSENTIAL 30 iD ESSENTIAL 30 Woods & Stones
Main Product Features• Best value for money
• Resistant product with 0.30mm transparent wear-layer
• TopClean surface protection for great resistance and easy cleaning
Surface Treatment
Sustainability Tag
Recyclable
100%
(1)
* except recycled content
*
Better IndoorAir Quality
*TVOC AT 28 DAYS
< 100 µg /m3
(1) Progressively for all our professional vinyl products during 2014
Logistics InformationAvailable in planks
30.5 x 60cm 15,2 x 91,4cm
Laying direction:
General InformationiD Essential 30
EN 14041:2004
Distributed by: Tarkett SA 08203 Sedan - FRANCE
0 1 2 0 - 0 4 3 D o P - 2 0 1 3 - 0 4 http://professionals.tarkett.com
According to European Classification ISO 10874 (EN 685)
DF
Venezia Sandstone Scratched Metal
Grey
Beig
e
Blac
k
Brow
n
Grey
3979 001 3979 002 3979 004 3979 005 3979 008
Original Slate
Blac
k
Grey
3979 006 3979 007
Walnut Beech Maple Ash
Brow
n
Ligh
t Bro
wn
Natu
ral
Natu
ral
Hon
ey
3976 033 3976 034 3976 020 3976 031 3976 032
Venezia - Grey
War
m B
row
n
3976 030
Vintage Strip
TECHNICAL DATA STANDARDS iD Essential 30
Classification
ClassificationISO 10874 (EN 685)domestic commercial
Classes:2332
Characteristics
Total thickness ISO 24346 (EN 428) 2.00mm
Wear layer thickness ISO 24340 (EN 429) 0.30mm
Total weight ISO 23997 (EN 430) 3 400g/m2
PUR treatment - TopClean
Abrasion group EN 660-2 Group T: ≤ 2mm³
Technical performances
Residual indentationAverage measured value
≤ 0.10mmISO 24343-1 (EN 433) requirement
Reaction to fire EN 13501-1ASTM E648
Bfl s1 glued over A2fl or A1fl substrate
(concrete)
Slip resistance DIN 51130EN 13893 R9
Dimensional stability ISO 23999 (EN 434) ≤ 0.25%
Furniture leg EN 424 No damage
Castor wheel test ISO 4918 (EN 425) No damage
Curl resultant to heat ISO 23999 (EN 434) ≤ 2.00mm
Electrostratic properties EN 1815EN 1081
< 2 kV on concreteR1 > 109 ohms
Chemical resistance ISO 26987 (EN 423) Good resistance
Hygiene - Does not contribute to infection spreading
Thermal resistance Underfloor heating EN ISO 10456 0.07m2 K/W
Suitable - max. 27°C
Light fastness EN ISO 105-B02 ≥ 6
The above information is subject to modifications for the benefit of further improvement (01/2014).
For more detailed technical information, please contact Tarkett.
