TREMIX
SPARE PARTSCATALOGUE
Nordic Construction Equipment AB Stensätravägen 9, Box226 SE- 127 24 Skärholmen, Sweden Tel: +46 8 603 32 00 Telefax: +46 8 646 72 61
Forward compactor
MV 90
SMV090-1EN2
Spare Parts Catalogue
We reserve the right to change specifications without notice.Printed in Sweden.
I
Engines:
Forward comapctorMV90
SMV090-1EN2
SMV090-1EN1 2009 - 01 Replaced by SMV090-1EN2SMV090-1EN2 2009 - 04
Honda GX160
Published catalogue issues valid for these forward campactors: Catalogue Issue date
ORDERING SPARE PARTSTo avoid errors in delivery, please give the following infor-mation when ordering spare parts:1. Type of machine.2. Roller serial number.3. Quantity required.4. Part number.5. Parts denomination.6. Dimensions when ordering per length.
RESERVDELSBESTÄLLNINGFöljande uppgifter ska lämnas vid beställning av reserv-delarför att undvika leveransfel:1. Maskintyp.2. Vältens serienummer.3. Antal av önskad reservdel.4. Reserdelens artikelnummer.5. Reservdelens benämning.6. Måttuppgifter vid beställning av metervara.
ERSATZTEILBESTELLUNGZur Vermeidung von Fehllieferungen sind bei der Bestel-lung von Ersatzteilen folgende Angaben zu machen:1. Maschinentyp.2. Herstellungsnummer.3. Bestellmenge. (Quantity)4. Ersatzteilnummer. (Part Nº)5. Ersatzteilbenennung. (Denomination)6. Massangaben bei Bestellung von Meterware.
ORDINI DI RICAMBIPer evitare errori nelle consegne di ricambi, Vi preghiamo dicomunicarci le seguenti informazioni al momento dell 'or-dinazione:1. Tipo di macchina.2. Numero di serie della macchina.3. Quantità dei pezzi desiderati. (Quantity)4. Numero di codice del pezzo. (Part Nº)5. Descrizione del pezzo di ricambio. (Denomination)6. Misura, in caso di ordine per metro.
PEDIDO DE RECAMBIOSPara evitar errores en las entregas, deberán indicarse lossiguientes datos al hacer un pedido de recambios:1. Tipo de máquina.2. Número de serie.3. Cantidad de piezas deseadas. (Quantity)4. Número de artículo de la pieza de recambio. (Part Nº)5. Denominación de la pieza. (Denomination)6. Indíquese la medida al solicitar un artículo que se expide
por metros.
COMMANDE DE PIECES DE RECHANGELes indications suivantes doivent être fournies lors de lacommande de piéces de rechange, afin d'éviter toute erreurde livraison:1. Type de machine.2. Numéro de série.3. Quantité désirée de pièce de rechange. (Quantity)4. Numéro de la piéce de rechange. (Part Nº)5. Dénomination de la piéce de rechange. (Denomination)6. Longueur en cas de commande au mètre.
YOUR AGENT/DEALER:
II
III
NotesNotesNotesNotesNotes
GROUP PAGE NOTESPARTS SERVICEINFO INFO
Changes
1
1
Text pagesThe text pages is structured as thepicture on the right.1. This is the remarks for specificitems and the descriptions of theremarks is at the bottom of theparts list.2. Parts indicated by a dot andmoved to the right are includedwhen buying the assembled unitabove.3. Spare parts and service codefor a specific part, mainly forinternal use at . "A" = Service part,"B" = Fast moving part, "C" =Suggested exchanged part and "D"= Regular spare part.
2
Notes
IV
V
Catalogue
PÄRMETIKETTFör att undvika fel vid reservdelsbeställning finns här nedantvå etiketter som passar i fickorna på pärmarnas ryggar. Pådessa kan man se från vilket vältnummer av aktuell maskinreservdelskatalogen gäller. Gör så här:1. Tag denna sida ur pärmen.2. Klipp ut etiketten till VÄNSTER (1) och sätt in den i fickan
påDENNA pärmens rygg.3. Finns det en etikett till HÖGER (2), kan denna an-vändas
på pärmen för FÖREGÅENDEutgåva av denna katalog.4. Kasta detta papper.
BINDER LABELTo avoid errors when ordering spare parts use the labelsbelow to identify the catalogues on the back of the binder.The label contain the serial number range for which thecatalogue is valid. Do like this:1. Remove this page from the binder.2. Cut out the LEFT label (1) and put it on THIS binders
back.3. If there is a label to the RIGHT (2), it can be used on the
binder for PRECEDING issue of this catalogue.4. Throw away this paper.
KATALOG-BESCHRIFTUNGZur Vermeidung von Fehlen bei der Ersatzteilbestellungbenutzen Sie bitte die unteren Beschriftungen, um die Katalogeauf der Rückseite zu kennzeichen. Auf der Beschriftung istangegaben, für welche Maschinennummern der jeweiligeKatalog gültig ist. Ablauf:1. Nehmen Sie dieses Blatt aus dem Katalog.2. Schneiden Sie die LINKE Beschriftung (1) aus. Schieben Sie
die Beschriftung in die tasche auf DEM Katalogrücke.3. Sollte die Beschriftung unten RECHTS (2) mitgeliefert
werden, kennzeichen Sie damit bitte die ÄLTEREAusführung dieses Kataloges.
4. Den Rest dieses Blattes bitte vernichten.
ETICHETTA POSTA SUL RACCOGLITOREPer evitare errori quando ordinate pezzi di ricambio, usate leetichette in calce che servono ad identificare i cataloghi sulretro del raccoglitore. L'etichetta indica il numero di matricoladelle maccine prese in considerazione nel catalogo.1. Rimuovete questa pagina dal raccoglitore.2. Ritagliate l'etichetta posta a SINISTRA (1) e ponetela sul
retroDEL raccoglitore.3. Se trovate anche un'etichetta sulla DESTRA (2), ritagliatela
e ponetela sul raccoglitore relativo alla PRECEDENTEedizione del catalogo.
4. Distruggete questo foglio.
ETIQUETAGE DU CATALOGUEAfin d'éviter des erreurs lors de commandes de pièces de rechange,nous vous conseillons d'apposer les marquages ci-dessous àl'arrière du classeur, pour identifier les catalogues. Ce marquageindique les numéros de série pour lesquels le catalogue est adapté.Il convient de procéder de la façon suivante:1. Retirez cette page du classeur.2. Découpez l'étiquette de GAUCHE (1), et apposez-la à
l'arrière de CE catalogue.3. Si il y a une étiquette à DROITE (2), vous pourrez l'apposer
sur le classeur de l'edition PRECEDENTE du catalogue.4. Détruire cetta feuille.
ETIQUETA PARA LA CARPETAPara evitar errores al pedir repuestos utilicen las etiquetas abajodescritas para identificar los catálogos en la parte trasera dela carpeta. En la etiqueta se ven los números de referencia dela serie para la cual es válido el catálogo. Instrucciones:1. Quitar esta página de la carpeta.2. Corta la etiqueta IZQUIERDA (1) y ponerla est ESTA
carpeta en la parte trasera.3. Si hay una etiqueta en la parte DERECHA (2) se puede utilizar
en la carpeta para el catálogo que PRECEDEa esta.4. Tirar esta hoja.
SMV090-1EN2
TC 1
TABLE OF CONTENTS Page
MV90 From SN: 27600001 2
Lifting eye, engine plate, and eccentric element installation 4Engine plate installation 6Ground plate installation 8Protective frame Option 10Lifting handle Option 12Lifting eye Option 14Transport device installation Option 16Transport wheel Option 18Sprinkler system Option 20Fork lifting device Option 22Design cover Option 24
Eccentric element 26Eccentric element 28Cover, right side 30Cover, left side 32
Engine and engine installation 34Engine installation 36Engine Honda GX160K1SX 38
Power transmission 40Transmission cover 42
Handle 44Handle Standard 46Vibration damped handle Option 48
Decals and documentation 50Decals and documentation 52
2
MV90 From SN: 27600001MV090130
SMV090-1EN2
3
MV90 From SN: 27600001
SMV090-1EN2
CodePart NoItem Qty DescriptionRem10 Lifting eye, engine plate, and eccentric ( Page 4 )element installation120 Eccentric element ( Page 26 )130 Engine and engine installation ( Page 34 )140 Power transmission ( Page 40 )170 Handle ( Page 44 )180 Decals and documentation ( Page 50 )1
4
Lifting eye, engine plate, and eccentric element installation
SMV090-1EN2
5
Lifting eye, engine plate, and eccentric element installation
SMV090-1EN2
CodePart NoItem Qty DescriptionRem20 Engine plate installation ( Page 6 )130 Ground plate installation ( Page 8 )140 Protective frame ( Page 10 ) Option150 Lifting handle ( Page 12 ) Option160 Lifting eye ( Page 14 ) Option180 Transport device installation ( Page 16 ) Option190 Transport wheel ( Page 18 ) Option1
100 Sprinkler system ( Page 20 ) Option1130 Fork lifting device ( Page 22 ) Option1140 Design cover ( Page 24 ) Option1
6
Engine plate installation18620-1
SMV090-1EN2
7
Engine plate installation
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 D393823-72 Engine plate14 4700792725 Square taper washer4
8
Ground plate installation18609
SMV090-1EN2
9
Ground plate installation
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 Eccentric element12 4700282373 Shock absorber43 4700570103 Nut M108
10
Protective frame Option18613
SMV090-1EN2
11
Protective frame Option
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 D392920-71 Protective frame12 4700281269 Decal "LIFT"23 4700902041 Screw7
12
Lifting handle Option18614-1
SMV090-1EN2
13
Lifting handle Option
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 4700395018 Handle, right12 4700395020 Handle, left13 4700500505 Screw M8x20 8.84
14
Lifting eye Option18623
SMV090-1EN2
15
Lifting eye Option
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 D396963-71 Lifting eye12 4700902041 Screw3
16
Transport device installation Option18615
SMV090-1EN2
17
Transport device installation Option
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 Transport wheel ( Page 18 ) Option12 4700500505 Screw M8x20 8.843 4700500506 Screw4
18
Transport wheel Option18616
SMV090-1EN2
19
Transport wheel Option
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 4700393989 Bracket, left12 4700393990 Bracket, right13 4700393987 Fork14 4700383582 Wheel25 4700394103 Lock26 4700601003 Washer 8,4x25x247 4700500018 Screw M8-1,25x12 8,828 4700500506 Screw29 4700902286 Lock nut M82
10 4700500503 Screw411 4700902285 Lock nut M64
20
Sprinkler system Option18624-2
SMV090-1EN2
21
Sprinkler system Option
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 D392815-70 Water tank12 4700396178 A Sprinkler bar13 4700396180 Spacer24 4700904229 Washer 8,4x16x1,535 4700500067 Screw M8-1,25x55 8,826 4700500024 Screw M8x4517 4700902286 Lock nut M83
61 4700393020 Valve rod162 4700392073 Handle163 4700601003 Washer 8,4x25x2264 4700500021 Screw M8-1,25x25 8.8165 4700791182 Lock nut M8166 4700928381 Washer 6,4x18x1,6167 4700500013 Screw M6-1x16 8,8168 4700392092 Cap169 4700393381 Decal170 4700792804 O-ring1
A) Widht 420 mm
22
Fork lifting device Option18753
SMV090-1EN2
23
Fork lifting device Option
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 4700396194 Lifting eye22 4700902041 Screw43 4700615103 Screw84 4700902286 Lock nut M84
24
Design cover Option18395
SMV090-1EN2
25
Design cover Option
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 D393040-70 Cover1
26
Eccentric element
SMV090-1EN2
27
Eccentric element
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 Eccentric element ( Page 28 )12 Cover, right side ( Page 30 )13 Cover, left side ( Page 32 )1
28
Eccentric element18610-1
SMV090-1EN2
29
Eccentric element
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 D392196-03 A Ground plate12 4700392210 Eccentric shaft13 Cover, right side ( Page 30 )14 Cover, left side ( Page 32 )15 4700792711 Ball bearing2
A) Widht = 420 mm
30
Cover, right side18602-1
SMV090-1EN2
31
Cover, right side
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 4700396549 Cover12 4700792119 Screw3
1
32
Cover, left side18601-2
SMV090-1EN2
33
Cover, left side
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 4700396548 Cover12 4700163105 Lip-type oil seal14 4700395013 V-belt pulley15 4700792119 Screw36 4700904640 Washer 8,4x22x317 4700902041 Screw1
34
Engine and engine installation
SMV090-1EN2
35
Engine and engine installation
SMV090-1EN2
CodePart NoItem Qty DescriptionRem10 Engine installation ( Page 36 )130 Engine ( Page 38 ) Honda GX160K1SX1
36
Engine installation18618-1
SMV090-1EN2
37
Engine installation
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 Engine ( Page 38 ) Honda GX160K1SX12 4700904734 Washer 8,4x26x443 4700393903 Washer44 4700500508 Screw45 4700902286 Lock nut M846 4700396126 Stiffener17 4700792774 Blind rivet18 4700902041 Screw19 4700904734 Washer 8,4x26x41
10 4700391706 Centrifugal clutch1
38
Engine Honda GX160K1SX18619
SMV090-1EN2
39
Engine Honda GX160K1SX
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 4700281125 Petrol engine12 4700239059 .Muffler13 4700239060 .Muffler cover, upper14 4700239062 .Exhaust pipe15 4700238322 .Arrester, spark16 4700239063 .Gasket, muffler17 4700239323 A.Air filter, cpl18 4700239065 D.Recoil starter, cpl19 4700239374 B..Starter rope1
10 4700239375 B..Spring111 4700239376 ..Reel112 4700239377 ..Spring213 4700239378 ..Ratchet214 4700239379 ..Friction spring115 4700239380 ..Guide116 4700239381 ..Screw117 4700239391 B..Handle118 4700239321 .Fuel tank119 4700239324 D.Fuel tank cap120 4700238302 D.Oil plug221 4700238303 D.Gasket222 4700238306 D.Oil plug123 4700239067 .Oil alert124 4700239325 .Carburettor125 4700924842 .Spark plug126 4700238301 D.Gasket127 4700239664 D.Gasket, cylinder head132 4700573002 D Nut M51
D) Locking nut for revolution screw
40
Power transmission
SMV090-1EN2
41
Power transmission
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 Transmission cover ( Page 42 )1
42
Transmission cover18604-1
SMV090-1EN2
43
Transmission cover
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 D392862-70 V-belt guard, outer1
60 4700393325 Belt guard, inner161 4700902041 Screw762 4700570102 Nut M8163 4700395658 V-belt1
44
Handle
SMV090-1EN2
45
Handle
SMV090-1EN2
CodePart NoItem Qty DescriptionRem10 Handle ( Page 46 ) Standard120 Vibration damped handle ( Page 48 ) Option1
46
Handle Standard18612-2
SMV090-1EN2
47
Handle Standard
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 D396311-03 Handle, lower part12 D396312-03 Handle, lower part13 D396313-03 Handle, upper part14 4700393220 Link25 4700394029 Cover26 4700394145 Spacer sleeve27 4700394228 Washer28 4700541702 Screw M6x1249 4700791182 Lock nut M84
10 4700792497 Disc spring411 4700901928 Screw212 4700391821 Sleeve bearing213 4700391822 Shock absorber2
48
Vibration damped handle Option18598-1
SMV090-1EN2
49
Vibration damped handle Option
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 4700391826 Handle12 4700393079 Bracket23 4700391824 Shock absorber24 4700393078 Bracket25 4700792496 Screw86 4700792406 Screw87 4700792784 Screw168 4700792783 Washer16
50
Decals and documentation
SMV090-1EN2
51
Decals and documentation
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 Decals and documentation ( Page 52 )0
52
Decals and documentation18936
SMV090-1EN2
53
Decals and documentation
SMV090-1EN2
CodePart NoItem Qty DescriptionRem1 Sign plate12 4700527001 Screw43 4700389850 Decal "TREMIX"14 4700394783 Decal "MODEL CODE"16 4700281269 Decal "LIFT"27 4700394708 Assembly decal18 4700394704 Decal1
10 4700791290 Decal "Sound power level" 102dB112 Documentation
.Spare parts catalogue1
.Instruction manual1
.Instruction book, engine1100 4700389850 Decal "TREMIX"1
NI 1
Part Number Page Part Number Page Part Number Page
NUMERICAL INDEXSMV090-1EN2
4700163105 334700238301 394700238302 394700238303 394700238306 394700238322 394700239059 394700239060 394700239062 394700239063 394700239065 394700239067 394700239321 394700239323 394700239324 394700239325 394700239374 394700239375 394700239376 394700239377 394700239378 394700239379 394700239380 394700239381 394700239391 394700239664 394700281125 394700281269 11,534700282373 94700383582 194700389850 534700391706 374700391821 474700391822 474700391824 494700391826 494700392073 214700392092 214700392210 294700393020 214700393078 494700393079 494700393220 474700393325 434700393381 214700393903 374700393987 194700393989 194700393990 194700394029 474700394103 194700394145 474700394228 474700394704 534700394708 534700394783 534700395013 334700395018 134700395020 134700395658 434700396126 374700396178 21
4700396180 214700396194 234700396548 334700396549 314700500013 214700500018 194700500021 214700500024 214700500067 214700500503 194700500505 13,174700500506 17,194700500508 374700527001 534700541702 474700570102 434700570103 94700573002 394700601003 19,214700615103 234700791182 21,474700791290 534700792119 31,334700792406 494700792496 494700792497 474700792711 294700792725 74700792774 374700792783 494700792784 494700792804 214700901928 474700902041 11,15,23,33,37
434700902285 194700902286 19,21,23,374700904229 214700904640 334700904734 374700924842 394700928381 21D392196-03 29D392815-70 21D392862-70 43D392920-71 11D393040-70 25D393823-72 7D396311-03 47D396312-03 47D396313-03 47D396963-71 15