Trenchlite® GRP Cable TroughLOAD RATINGS CERTIFIED UPTO 12.5 TONNESTrenchlite® GRP Cable troughs and lids are designed to meet the load classes of BS EN 1433 and BS EN 124 classes A15 and B125.
A strong and lightweight alternative to concrete.
LIGHTWEIGHTMade from glass reinforced plastic, over 90% lighter than precast concrete trough.
BUILT-IN STRENGTH Innovative design provides excellent strength to weight ratio.
EASY TO INSTALLSignificant reductions in transport, machinery, time and labour required to install the units when compared with concrete troughs.
Our moulded GRP Cable trough system provides a
cost effective solution that is lightweight, without
compromising on strength. The reinforced design
offers a significant advantage over typical polymer
and composite troughs. Trenchlite® troughs are
capable of meeting loads of up to 12.5 tonnes,
without the need for concrete surround.
When compared with pre-cast concrete our GRP
cable troughs provide a weight saving of over 90%,
allowing for easy installation, reduced labour and
improved safety. The many benefits of Trenchlite®
GRP cable troughs make them the ideal solution for
use in a wide range of applications.
EASY HANDLING AND INSTALLATION
OVER 90% LIGHTER THAN PRECAST CONCRETE TROUGHS
REDUCED LABOUR COSTS
SIGNIFICANT REDUCTIONS IN THE MACHINERY REQUIRED TO INSTALL
SAFER TO TRANSPORT WITH FEWER BREAKAGES
DOES NOT CONTAIN METAL REINFORCEMENT BARS
CAN BE CORED THROUGH ONSITE WITH THE USE OF HAND TOOLS
REQUIRES NO ONGOING MAINTENANCE
Lightweight without compromising on strength.
Benefits of Trenchlite® GRP cable trough compared with pre-cast concrete:
Trenchlite® GRP Cable Troughs
SUBSTATIONS
POWER STATIONS
WIND FARMS
BIOMASS PLANTS
GAS COMPRESSOR PLANTS
WASTE WATER TREATMENT PLANTS
PETROCHEMICAL PLANTS
HOSPITALS
COMMERCIAL INFRASTRUCTURE
Product applications:
All dimensions contained within this brochure are nominal and do not take into account manufacturing tolerances.
Weight 31 kg
Unit Length 1000mm
Internal Dimensions 600mm W x 300mm H
External Dimensions 1000mm L x 780mm W x 435mm H
Internal Capacity 180,000mm2
Colour Grey
Material GRP (Glass Reinforced Plastic)
1m straight section:
Trenchlite® Specification
435mm
600mm
300m
m
780mm
1000mm
APPROVED TO:
BSEN 1433 and BSEN 124 Class A15 and B125
Weight 41 kg
Unit Length 1500mm
Internal Dimensions 600mm W x 300mm H
External Dimensions 1500mm L x 1175mm W x 435mm H
Colour Grey
Material GRP (Glass Reinforced Plastic)
‘T’ section:
1500mm
435mm
780mm
780mm
1175mm
600mm
300mm
Weight 41 kg
Unit Length 1200mm
Internal Dimensions 600mm W x 300mm H
External Dimensions 1200mm L x 1200mm W x 435mm H
Colour Grey
Material GRP (Glass Reinforced Plastic)
Right angle section:
1200mm1200mm
780mm
435mm
600mm
300mm
Alcomet Ltd Unit 5, Gibbons Industrial Park, Dudley Road, Kingswinford, West Midlands, DY6 8XF
01384 404488
Our range of Trenchlite® GRP trough lids are a robust,
lightweight and cost effective product. Our range of lids
are been designed and tested to meet the requirements of
BS EN 124 classes A and B.
The lids are a versatile alternative to concrete, they are
non-corrosive, lightweight, and anti-slip.
Our Lids can be supplied with lifting slots. We also stock a
range of lifting handles to provide easy access when the
lids need to be removed.
Load Class A15 (test to 1.5 tonnes)
Colour Grey, Green, Yellow
Material GRP (Glass Reinforced Plastic)
Depth 50mm
Load Class A15 (tested to 1.5 tonnes)
Colour Grey, Green, Yellow
Material GRP (Glass Reinforced Plastic)
Depth 50mm
Load Class A15 & B125 (tested to 12.5 tonnes)
Colour Yellow
Material GRP (Glass Reinforced Plastic)
Depth 50mm
Open Mesh GRP Tough Lids:
Solid Top GRP Tough Lids:
Vehicle Rated Lids:
Trough Lids and Accessories
Open Mesh GRP Solid Top GRP Vehicle Rated
Trenchlite® GRP Cable Troughs
www.alcomet.net