+ All Categories
Home > Documents > Treverk...TILE SOLUTIONS Beige Black Capuccino Teak Wengé White Treverk | COLOR BODY PORCELAIN...

Treverk...TILE SOLUTIONS Beige Black Capuccino Teak Wengé White Treverk | COLOR BODY PORCELAIN...

Date post: 12-Feb-2020
Category:
Upload: others
View: 5 times
Download: 0 times
Share this document with a friend
2
TILE SOLUTIONS Treverk COLOR BODY PORCELAIN STONEWARE DIGITAL PRINT TECHNOLOGY RECTIFIED
Transcript
Page 1: Treverk...TILE SOLUTIONS Beige Black Capuccino Teak Wengé White Treverk | COLOR BODY PORCELAIN STONEWARE | DIGITAL PRINT TECHNOLOGY | RECTIFIEDSizes 6"x48" Rectified 8"x48" Rectified

T I L E S O L U T I O N S

TreverkCOLOR BODY PORCELAIN STONEWARE DIGITAL PRINT TECHNOLOGY RECTIFIED

Page 2: Treverk...TILE SOLUTIONS Beige Black Capuccino Teak Wengé White Treverk | COLOR BODY PORCELAIN STONEWARE | DIGITAL PRINT TECHNOLOGY | RECTIFIEDSizes 6"x48" Rectified 8"x48" Rectified

T I L E S O L U T I O N S

Beige Black TeakCapuccino Wengé White

Treverk | COLOR BODY PORCELAIN STONEWARE | DIGITAL PRINT TECHNOLOGY | RECTIFIED

Sizes6"x48" Rectified 8"x48" Rectified

12"x48" Rectified

MODULAR TILE* DECOS

Color Name

6”x48”Rectified

8”x48”Rectified

12”x48”Rectified

12”x12”Mosaic

12”x24”Decoro

Mix

Beige M7W2 M7WW M7WP

Black M7W6 M7W0 M7WU

Capuccino M7W3 M7WX MYWQ

Teak M7W4 M7WY M7WR

Wengé M7W5 M7WZ MYWT

White M7W1 M7WV M7WN

White/Capuccino/Black M7W7 M7XC

Beige/Teak/Wengé M7W8 M7XD

Floor Tile

Wall Tile

Abrasion Resistance

Rectified Tile

Suitable for Outdoors

Frost Resistant

Meets ADA Recommendations

Certified No VOC

VOC

C.O.F. (Wet)

C.O.F. (Dry)

Slight Variation

40% Minimum Pre-Consumer

Recycled Content

40%

Modular Tile

*Due to size fluctuation, all measurements given are nominal. Where strict accuracy is required, please refer to actual tile samples.

Technical Characteristics ASTM Standards ASTM Test Results ASTM Test Methods

Water Absorption ≤0.50% ≤ 0.50% C 373

Frost Resistance As Reported Resistant C 1026

Scratch Resistance MOHS 1-10 6.5 MOHS Scale

Breaking Strength ≥ 250 lbf. ≥ 891 lbf. C 648

Facial Dimension -3.0% ≤ Nominal ≤ 2.0% Within Standard C 499

Nominal Thickness ≤ 0.04 in (1.02 mm max) Within Standard C 499

Wedging (squareness) ≤ 0.25% or +/- 0.8 mm** Within Standard C 502

Warpage Edge (flatness) ≤ 0.40% or +/- 1.8 mm** Within Standard C 485

Abrasion Resistance Class 0 - Class V Class IV* C 1027

Dry Coefficient of Friction As Reported 0.70 ≤ C.O.F. < 0.80 C 1028

Wet Coefficient of Friction As Reportedd 0.60 ≤ C.O.F. < 0.70 C 1028

Chemical Resistance Class A - Class E Class A C 650

Stain Resistance Class A - Class E Class A C 1378

ASTM Test Results

* Abrasion Resistance / Suggested ApplicationsClass IV: Tile in this class may withstand heavier amounts of traffic with greater amounts of dirt and/or other abrasives present, including commercial kitchens and areas with regular traffic from the outside. See Coefficient of Friction and Frost Resistance for installation-specific details.** Whichever is less


Recommended