DATASHEET

Key Features Trimble Field Link for MEP continues the Building Construction Division’s philosophy of creating leading edge solutions designed for the specific needs of building contractors. With the increasing needs of contractors implementing Virtual Design & Construction (VDC) and Building Information Modeling (BIM) construction processes, Trimble Field Link for MEP takes construction layout and field tasks to the next level.

trimble VisiON™

With the increased importance of Quality Control/Quality Assurance, and accurate as-built data collection, the Trimble RTS773 Robotic Total Station and Trimble Field Link with Trimble VISION technology provide an unequaled ability to visualize what is being measured or staked. The RTS773 Robotic Total Station includes a camera that provides users a “through-the-telescope” view on Trimble Field Link while working robotically. Trimble VISION technology can be used in a variety of applications within Trimble Field Link including layout, collect data, and generate field reports. To provide an accurate representation of the design and field image that is displayed on Trimble Field Link, job data including points and linework is overlaid on the camera image. The Trimble VISION technology with Trimble Field Link provides the most accurate and realistic interpretation of the measurement surface.

lay OutTrimble Field Link for MEP allows a task-based workflow to easily manage layout tasks. A list of points to be laid out is created eliminating the need for field crews to “skip” points that do not need to be laid out. The Layout Point List can be populated using common descriptions, layers, or selecting points from a list or map.

Since field layout personnel have different visualization preferences and not all jobs dictate seeing the same level of detail, Trimble Field Link for MEP incorporates customizable views in layout allowing users to create the most functional interface for their particular usage.

Users can choose between maximizing the map view with a condensed view of the layout point list details or viewing maximum layout point list details. Users can also toggle between the typical map view during layout and a new enhanced bulls-eye view.

repOrtiNgTrimble Field Link for MEP includes enhanced reporting to assist contractors with understanding what is going on in the field. The Layout Deviations and Daily Layout Summary allow contractors to quickly measure their layout productivity and accuracy.

In addition, users can document daily field activities and existing site conditions for RFI communications using the included Field Report. Field Report allows users to include detailed text, digital photos, and measurement coordinates to clearly communicate issues and conflicts in the field.

mOdel ViewerTrimble Field Link for MEP extends the VDC and BIM workflow processes to the jobsite by incorporating a 3D model viewer that enables field personnel to view 3D design models (DWG or DXF format). This capability allows field crews to more clearly visualize the design intent and make timely and accurate decisions when issues arise. Simple navigation controls make viewing 3D models simple, even for novice users.

View point data overlaid on image when viewing in camera mode with Trimble VISION

Expandable detail pane for improved point information during layout

Task based layout routines with user defined point lists

3D Model viewer to visualize models in the field and more accurately build to design

Field reports to quickly and accurately report field issues and conflicts to ensure timely resolution

Trimble Field link For meP

Trimble Field Link for MEP Model Viewer

www.trimble.comTRIMBLE AUThORIzED DISTRIBUTION PARTNER

Trimble Field link For meP

© 2010-2012, Trimble Navigation Limited. All rights reserved. Trimble, and the Globe & Triangle logo are trademarks of Trimble Navigation Limited, registered in the United States and in other countries. Vision is a trademark of Trimble Navigation Limited. All other trademarks are the property of their respective owners. PN 78238 (08/12)

NORTH AMERICATrimble Building Construction Division5475 Kellenburger RoadDayton, Ohio 45424USA800-538-7800 (Toll Free)+1-937-245-5154 Phone+1-937-233-9441 Fax

EUROPETrimble Germany GmbHAm Prime Parc 1165479 RaunheimGERMANY+49-6142-2100-0 Phone+49-6142-2100-550 Fax

ASIA-PACIFICTrimble Navigation Singapore PTE Ltd.80 Marine Parade Road, #22-06Parkway Parade Singapore, 449269 SINGAPORE+65 6348 2212 Phone+65 6348 2232 Fax

staNdard Features•GenuineWindows7Professional• IntelAtom1.6GHzprocessor• 1GBDRAM•80GBSolidStateHardDrive• Sunlightreadablecolordisplay• 5wireresistivetouchscreen•Ruggedwaterproofdesign•Headphone/speakermini-jackstereo•Microphone/line-inmini-jack•Outwardfacingautofocus2MPcamera(videoandphoto)•Userfacing1.3MPcamera(videoandphoto)• IntegratedBluetooth2.1Class2• IntegratedWiFib/g(Ciscocertificationpending)• IntegratedGPS• SDIOmemoryslot• ExpressCard34mmslot• ExtendedBatterySet(8-hour)1

• 12-monthwarranty

staNdard sOFtware•User’sManual(electronic)• InternetExplorer•G-CamerasoftwarelinkedtoGPS•GPSreceivercontrolsoftware

staNdard accessOries•ACchargerwithpowercord• Styluspen• Tetherforstyluspen•Handstrap• Screenprotectors• ExtendedCap•DisplayCleaningCloth

OptiONal accessOries• 12VVehicleCharger• InternationalAdaptor• PoleMount•OfficeDockingStation(featuresa2-bayextrabatterycharger)• Lanyardforstylus• RuggedKeyboard

physicalSize (LxWxh) . . . . . . . . . . . . . . . . . . . 5.5inx9inx2in(14cmx23cmx5cm)Weight . . . . . . . . . . . . . 2.6lb(1.2kg)includingstrapandstandardbatteriesColors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . yellow w/ black or gray w/blackhousing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Mg-AlKeys . . . . . . . . . . six keys (power, enter, directional and 3 user programmable

function buttons)

eNVirONmeNtal speciFicatiONs meets or exceeds:Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . Immersedin1mofwaterfor30minutes

WaterJet12.5mmdia.@2.5m–3m,100Liter/minMIL-STD-810F,Method512.4,ProcedureI

IEC-529,IP67Sand & dust . . . . . . . . . . . 8hoursofoperationwithblowingtalcumpowder

MIL-STD-810F,Method510.3,ProceduresI,IIIEC-529,IP67

Drop . . . . . . . . . . . . . . . . 26dropsfrom4ft(1.22m)ontoplywoodoversteel6additionaldropsat–22°F(–30°C)6additionaldropsat140°F(60°C)

MIL-STD-810F,Method516.5,ProcedureIVVibration . . . . . . . . . . . . . . . General Minimum Integrity and Loose Cargo test

MIL-STD810F,Method514.5,ProcedureI,IIOperating Temperature . . . . . . . . . . . . . . . . . –22°Fto140°F(–30°Cto60°C)

MIL-STD810F,Method501.4,ProcedureIIMIL-STD810F,Method502.4,ProcedureI,II,III

Storage Temperature . . . . . . . . . . . . . . . . . . . –40°Fto158°F(–40°Cto70°C)MIL-STD810F,Method501.4,ProcedureI

MIL-STD810F,Method502.4,ProcedureI,II,IIITemperature shock. . . . . . . . . . . . . . . . . . . . . . . . . –22°F/149°F(–30°C/+65°C)

MIL-STD-810F,Method503.4,ProcedureIhumidity . . . . . . . . . . . . . . . . . . . .90%RHtempcycle32°F/158°F(0°C/+70°C)

MIL-STD-810F,Method507.4Altitude . . . . . . . . . . 15,000ftat73°F(22°C)and40,000ft.at–22°F(–30°C)

MIL-STD-810F,Method500.4,ProceduresI,II,III

electricalProcessor . . . . . . . . . . . . . . . . . . . . . . . . . . . .IntelAtomZ5301.6GHzprocessorRAM Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1GBDDR2Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32GBSolidStateHardDriveExpansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SDIO memory slot

ExpressCard34mmslotDisplay . . . . . . . . . . . . . . . . . . . . . . . . . 7"widescreen1024x600WSVGA650nitStandard Batteries . . . . . . . . . . . . . Dual hot-swappable Lithium-Ion batteries,

2600mAmpeachExtended Batteries . . . . . . . . . . . . . Dual hot-swappable Lithium-Ion batteries,

5100mAmpeachI/O . . . . . . . . . . . . . . . . . . . . . . . . . .USB2.0port(x2),9-pinserialport(RS-232)

DCpowerport,32-pindockingExternal GPS Antenna via Vehicle Docking Station

Integrated Bluetooth . . . . . . . . . . BilliontonBluetoothv.2.1+EDRCompliantClass2(2.5mW)

Integrated802.11b/g . . . . . . . . . . . . . . . . . . . . . . . . IntelWiFiLink5100(CCX)Integrated GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . SiRF STAR III, WAAS capable

certiFicatiONs: MIL-STD-461E(RE102,RS103),RoHScompliant,MIL-STD-810F,IP67,TUV,C-Tick (Australia/NewZealand),FCC(US),CE(EU),IC(Canada),Section508compliant,CCXv4

1 To ensure best performance when temperatures are below –4 F (–20 C), be sure battery is inserted in the device only when in use. When device is not in use at these temperatures, keep batteries in a pocket or stored in a warmer area.

Specifications subject to change without notice.

Trimble Rapid Positioning System

DATASHEET

Key Features:

• Increase productivity: Save time so you can finish jobs faster.

• Trimble Accurate: Achieve results you can hang your reputation on.

• Easy to use: Anyone on your crew can use it, from the most to the least experienced.

• Versatile: With paper plans or digital designs, the RPT600 meets the unique demands of every job.

WE DON’T MEAN TO DISRESPECT YOUR TAPE MEASURE, BUT THERE’S A BETTER WAY TO POSITION YOURSELF ON THE JOB SITE. MEET THE TRIMBLE RAPID POSITIONING SYSTEM.

It’s the newest essential tool in the construction toolbox. Created especially for common layout jobs on the construction site, it’s got everything you need to measure positions faster, more easily, and more accurately.

Your New Toolbox EssentialThe Trimble RPT600 Layout Station with Trimble Field Link 2D software measures distances and finds positions on the construction job site. It’s a tool that Trimble has designed and engineered—from scratch—to meet all your unique layout needs for:

• Floors

• Walls and ceilings

• Formwork

• Decking

• Plumbing

• Electrical

• Concrete slabs

• Mechanical

• More

It’s packed with innovative features, but only those you’ll find invaluable. And whether your projects are big or small, the Trimble Rapid Positioning System puts Trimble quality and accuracy at your fingertips.

The Trimble RPT600 Layout Station is controlled by Trimble Field Link 2D software on a rugged tablet computer.

DATASHEET

© 2015, Trimble Navigation Limited. All rights reserved. All other trademarks are the property of their respective owners. PN 022519-106 (01/15)

TRIMBLE MEP116 Inverness Drive East, Suite 210Englewood, CO 80112Phone: 1-800-234-3758

www.trimblebuildings.com

A Smarter Way to Work The Trimble RPT600 does the work for you! It automates the measuring of distances and angles, so it finds positions faster and more accurately than a tape measure. For most building construction jobs, it’s also faster and more efficient than a total station, because it’s specifically designed to make layout projects easy. It doesn’t include features for you to adapt to, or work around…or pay for.

Smart One-Button Setup with AutostationingNo matter where the tool is placed, setup is fast and automatic. Set the RPT600 on a tripod or attach it to a stationary element on the worksite. Trimble Autostationing technology lets the system self-locate relative to the project you are working on. No leveling required. Just press the green button!

Flexible Targeting and Visual LayoutControl the RPT600 from anywhere—at the station or next to the target. You’ll see what

the instrument sees through the view finder on your controller.

Leave your rod and prism in the truck? No problem. Trimble’s unique Visual Layout method provides an easy-to-see green laser that will point to your measuring spot. This method is fast and can prevent human error.

Intuitive WorkflowThe smart Trimble Field Link 2D software guides you through each measurement step from start to finish. This consistent workflow ensures even inexperienced field crew can follow correct procedure every time.

Work with ConfidenceThe Trimble RPT600 is simple enough for anyone to operate with confidence—its automated functions, one-button setup, and guided workflows are quick to learn. But even though this system is easy to use, it still delivers Trimble quality and accuracy.

Work Directly from a 2D Model or PlanTrimble Field Link 2D conforms to your business and layout style whether you need to create points and a plan on the job or work directly from a model or 2D drawing. If you’re working with traditional construction methods, simply key-in points directly to Trimble Field Link 2D on the controller. Or import points from one of the many data sources that the software supports, including Trimble Field Points, Microsoft Excel, and SketchUp.

Once points are laid out on the job, you can round-trip them back to the original office software to compare with the design.

Quality AssuranceWhen a job is done, anyone can go back and verify that the work is right—for absolute peace of mind.

Trimble Field Link 2D updates a sortable Layout Deviation Report as you measure. This report provides complete visibility into performed work, and can be shared with critical stakeholders at any time or stage.

Purpose-Built for Construction Layout

• Twin handles: Ceiling layout

demands a tool that will go

straight up. The RPT600’s delivers

300° of tilt for easy overhead

measurements.

• Compact and convenient:

Customized for construction

layout jobs it’s small and compact.

• No eyepiece in sight: See what

the instrument sees right on the

controller. Point, visualize, and

position the instrument

from wherever you happen to

be standing.

• No tribrach: Instrument leveling

can be frustrating, difficult,

and time-consuming; Trimble

engineered the RPT600 to

eliminate this step completely!

• Long-life batteries: Work all day

without worrying about your

batteries running out.

• A Rugged

Controller:

Easy-to-use

Trimble Field Link

2D software runs on

a Windows-based

tablet with a tough

case built for the

job site.

• Green laser: The

highly visible laser

dot lets you measure

without a prism on a

wide range of surfaces.