TIRA-TRINCAACRYLIC MASTIC SEALER
Construcril
Acrylic-based elastic monolithic adhesive, for diverse applications and treatments.
AREAS OF APLLICATION
§ Caulking in bathroom fittings, gutters, flash-ings, drywall, wood and roofs.
§ Cracks in masonry.
ME
RE
LY I
LLU
ST
RA
TIV
E I
MA
GE
S
Itapevi SP +55 11 4141.8203
CUSTOMER SERVICE
CONSTRUCRIL TIRA-TRINCAACRYLIC MASTIC SEALER
www.construcril.com.brSITE
12 months.VALIDITY
[email protected] SUPPORT
Construcril ensures the quality of all products; we do not assume responsibility for performance of the work since we do not have direct control over the application. All products should be applied as instructed in our factsheets and processes made available by the company on site and technical department.
NOTE
Store the product in a cool, dry, and well-ventilated place, out of reach of children, animals and away from heat sources. Never expose the product to direct sunlight.
STORAGE
§ Processes 017, 018 and 019.PROCESSES OF APPLICATIONADVANTAGES
§ It enables painting after drying. § Reduction of work load. § Ready for use, it does not require mixing, which facilitates
its application.
§ Bucket with 5 kg – 50 ml
§ Apply the tube of Construcril Crack using appropriate device.§ Cut the nozzle to the desired extent.
§ Wait for drying and continue to the conventional painting services.
§ Start application checking the membrane thickness, once is greater than 8 mm, split the application in two steps in order to facilitate the evaporation of the water.
§ Bucket with 5 kg.
PACKAGING
APPLICATION
PREPARING THE SURFACE
§ It stands 20% elongation.§ It can receive any coating directly.§ High adhesion on various substrates.
Surfaces should be cleaned of dust, oil and grease, free from particles etc.
USAGE
§ In case of contact with skin, wash with SOAP and water for at least 15 minutes.
§ Tube of 400 g.
§ Non corrosive.
§ It is essential the use of PPE.RECOMMENDATION
§ Regular care in handling chemicals.
§ Tube of 400 g – 10 m linear to 5 mm of diameter.
§ Great efficiency and high performance.
§ If swallowed, do not induce vomit and immediately consult a doctor.
§ In case of contact with eyes, rinse immediately with running water for 15 minutes.
pH 9 - 11
Dilution
Basic Composition
Conditions of Application
P.E. (g/cm³)
Ambient Temperature Drying
Water
Acrylic Resin
25°C / 50% UR
1,6 +/- 0,20 g/cm³
24 hours
W a t e r p r o o f i n g s • M o r t a r A d d i t i v e s • S e a l a n t s • M a s t i c s • G l u e s • D r y w a l l J o i n t C o m p o u n d
THECNICAL DATA
