3.30
TRIO 330
pro
du
ct r
ang
e 4.
30
The framed panel formworkfor heights of up to 3.30 m
2 ties up to 3.30 m
TRIO 330_gb_ma 09.08.2006 8:29 Uhr Seite a1
3
2
1
2
*These values were calculated according tothe guidelines for issuing seals of approvalfor framed panel formwork by the seal ofapproval protection association for concre-te formwork e.V. GSV.
TRIO 330Clearly visible:Only 2 ties are required for con-creting heights of up to 3.30 m.
The BFD alignment coupler
TRIO 330 is an independent form-work system with only 6 panelsizes.
TRIO 330 has a symmetrical andasymmetrical tie arrangement; enabling ties to be placed horizontallyor vertically.Incorrect erection is eliminated.
TRIO 330 only requires one part forall connections: the BFD alignmentcoupler. (German acronym for fastening,aligning and tightening)
1 TRIO 330 and TRIO 270 can beused opposite each other.
2 TRIO 330 provides for the bestsurface finishes with the hig-hest fresh concrete pressure. *With only 2 ties in a height ofup to 3.30 m TRIO 330 complieswith DIN 18202, Table 3, Line 7under a fresh concrete pressureof 82.5 kN/m2.
3 TRIO 330 can also be extended.The symmetrical tie arrange-ment ensures correct tie alignment, eliminating faultyerection.
TRIO 330The framed panel formwork forfloor heights up to 3.30 m
2.70
2.70
3.30
3.30
TRIO 330_gb_ma 09.08.2006 8:30 Uhr Seite a2
3
TRM
72
3025 24
60
WDA 5 (6)
TE
TRM
72
60
TE
Detail solutions as for TRIO 270e.g. external corners
External corner with 7 BFD couplers.Standard panels with 3 BFD couplersin a 3.30 m height.
13.20 m high wall with4 x 3.30 m TRIO panels.
Accessories such as the BFD align-ment coupler, compensation waling,scaffold brackets etc., are the sameas for TRIO 270.
TRIO 330 also has all the advantagesof TRIO 270, such as: powder coating,connection of struts all round, closedsections etc.
TRIO 330_gb_ma 09.08.2006 8:30 Uhr Seite 1
540
300 600 600 600 300
2400
575
150
1175
1650
575
150
150100
540
100150
ø 20
120 77
300
300
300
300
300
300
300
300
300
300
3300
300
300 300
1200
300
ø 24
3300
3300
ø 24
2525
ø 24
ø 27
ø 24
ø 27
120
120
112,5 112,5
75
1320
150
7575
680
4
Panel TR/4 330x240 = 7,92m2 398,00 054304Fitted with 18mm Finply formlining.
Panel TR/4 330x120 = 3,96m2 192,00 054314Panel TR/4 330x 30 = 0,99m2 64,90 054364Fitted with 18mm Finply formlining.
Weight kg Item no.
Levering corner
Detail:
The tapered tie hole allowsthe tie to be angled at 6° inany direction.
Detail:
The tapered tie hole allowsthe tie to be angled at 6° inany direction.
Levering corner
Also with levering corner asfrom the year 2002
TRIO Steel Panels, h = 3,30m
3300
3300
3300
3300
300 300
900
300
600
25 4930 3030
720
300
300
600
600
300
300
300
300
600
300
720
3723
ø 24
5
Panel TR/4 330x90 = 2,97m2 135,00 054324Panel TR/4 330x60 = 1,98m2 97,40 054354Fitted with 18mm Finply formlining.
Panel TR/4 330x72 = 2,38m2 108,00 054334Multi Panel TRM/4 330x72 = 2,38m2 122,00 054344For external corners, for obliqueangles, wall junctions, stopends etc..Fitted with 18mm Finply formlining.Complete with:Plug ø 20/24 (88x).
Weight kg Item no.
Levering corner
Also with leveringcorner as from the year 2002
Also with levering corner asfrom the year 2002
300 12
0
300
33
120
300
300
≥ 75°
584
292 33
575
1175
ø 24
1650
575
575
1175
300
300
300
300
300
300
300
300
300
300
300 57
5
1650
290
300
300
300
300
300
300
300
300
310
125
175
3300
3300
3300
3300
400
550
120
40
120
60
50/60/100
150
430
570
1170
430 57
0
150
1170
150
570
900
1650
570
900
1170
150
40
ø 24
1650
50
6
Inside Corner TE/4 330 = 1,98m2 86,10 054374For 90° inside corners.Fitted with 18mm Finply fomlining.
Articulated Corner TGE/4 330 = 1,98m2 121,00 054414For oblique angles from 75°, used internallyand externally.Fitted with steel formlining.
TRIO Wall Thickness Compensation WDAFor wall thickness compensation incorner areas.
WDA-2 330/5 = 0,17m2 20,10 054391WDA-2 330/6 = 0,20m2 21,20 054401WDA/4 330/10 = 0,33m2 12,40 054435
Filler Plate LA/4 330x36 = 1,19m2 62,20 054384Closes any gap from 60 to 360mm.
Weight kg Item no.
3300
1200
900
1200
575
575
240
1650
2125
3300
98 (9
2)21 (2
7)
6632
60
51
9621
60
50
36
297
3300
1200
1500
569
480
600
1080
455
300
100
100
2555
7
Stopend Panel TR/4 330x24 = 0,65m2 53,80 023050For 240mm thick walls.Can also be used as a wall panel.
Shaft Panel TSE 330 = 0,33m2 140,00 105525For lifting complete internal formworkto shafts. Height extendable.Complete with:Pin 20x140, galv. andCotter Pin 4/1 (7x/5x).
Load-bearing pointPermissible load: 2000kg
Filler Support TPP 330 9,87 101829With nailing strip. TPP 330/27 9,17 101846For filling gaps with21mm (27mm) plywood.
Filler Support TPA 330 7,10 054430Coniferous timber.For infilling with 21mm plywood filler.
Weight kg Item no.
Detail TPP
max. 360
Detail TPA
300mm panel
600/720/900/1200mm panel
Struck
Shuttered
PERI GmbHP.O. Box 12 6489259 WeissenhornTel.: 0 73 09 / 9 50 -0Fax: 0 73 09 / 9 51 [email protected]
The PERI RangePanel Formwork
TRIO,TRIO-L,TRIO 330Versatile panel systemTRIO-H
REPLIABLE
DOMINOLight weight panel systemHANDSETThe "one man" panel system
Girder Wall Formwork
VARIO GT 24Wall, column formwork
RUNDFLEX and GRVCircular formwork
FTFFacade formwork
Shoring Systems
ST 100Stacking towerHD 200Heavy duty propPERI MULTIPROPThe Alu propPERI PEP PropPEP = PERI EURO-PROP
Climbing Formwork
KG and CBClimbing systems
ACSSelf climbing formwork
SKS and SSCSingle sided climbing form-work
Scaffolding
UP T 70 / T 100Frame scaffolding
UP RosettModular scaffolding
UP RosettShoring
Column Formwork
RAPIDAlu column formworkTRIOColumn formworkQUATTROThe fast column formworkPERI SRSCircular column formwork
Girder Slab Formwork
MULTIFLEXGirder slab formwork
UNIPORTAL / Table ModulesTable form
PD 81 system for 3 applications
Platform Systems
Folding Platform FB 180Universal working and protective scaffold to DIN 4420
ASG 160The light platform system forbuilding trades
Alu-Slab Formwork
PERI SKYDECKAlu slab formwork system
Further Systems
Software for formwork and scaffolding planning
PlywoodSite equipmentBrace framesFormwork accessoriesCustom forms
D
p
r 4.
30 e
08/
2006
2m
a A
rt. N
r.: 7
9157
9
© C
opyr
ight
by
PE
RI G
mbH
Rückseite_englisch 07.08.2006 10:51 Uhr Seite 1