TronRFID TR1010 RFID AntennaThe TronRFID TR1010 10in x 10in RFID Antenna is a right-hand circularly
polarized RFID antenna that connects to UHF RFID readers to read and write to
UHF RFID RAIN tags and labels. This antenna achieves high performance via
high gain, low VSWR and low axial ratio across the entire frequency band
(865MHz-930MHz)
The antenna is housed in high strength polycarbonate radome with thick
aluminum backplate for strong durability in hard outdoor environments. The
UHF RFID antenna is available in flush and VESAmount options.
The TronRFID TR1010 RFID Antenna pairs well with TronRFID Antenna Cables to
connect with various UHF RFID readers.
AvailableOn
Antenna Configurations
Physical Specifications: Environmental Specifications & Test
Product
TronRFID TR1010FlushMount TR1010-FM
865MHz-930MHz
VESAMount TR1010-VM
Mounting Part Number EPC Gen2 Band
Dimensions (L x W x H)
Weight
Mounting type
Connector type
Radome
Back plate
Mount Style
253mm x 253mm x 23mm9.96” x 9.96” x 0.86”
0.72Kg 1.6lbs
Flush or VESAmount
SMA female side connector
High Strength Polycarbonate (White)
Polished aluminum
Flush or 100 VESA Mount
Environmental rating
Operating temperature
Plenum rating
IECEx and ATEX
certification
IP68
-22°C to +55°C | -4°F to +149°F
Designed to meet specification(Certificate pending)
Designed to meet specification(Certificate pending)
(877) [email protected]
Contact
5159 Commercial Circle,Suite H, Concord,CA, 94520, USA
Location
NEED HELP WITH YOUR SOLUTION OR MORE DETAILS? CONTACT US!
© 2020 RFID4U All Rights Reserved.
Electrical SpecificationsAxial ratio
Far field 3-dB beamwidth
Front to back ratio
Input impedance
Anti-static protection
Maximum input power
2dB Typical
70°C
25dB
50 Ohms
Yes, DC grounded
10 W
Far field gain
VSWR
Polarization
Frequency range
9 dBic
1.3 : 1
RHCP (Right Hand Circular Polarization)
865MHz-930MHz
Physical Mounting InformationFlush Mount
24.80
A A
253.43 248.49
192.05
23
0.0
0
25
3.4
3
ø 11.00ø 6.35
SECTION A-A
5.39
6.26
VESA Mount
24.80
A A
100
74.2
5
100
74.25
253.43 248.49
192.05
23
0.0
0
25
3.4
3
ø 11.00ø 6.35
SECTION A-A
5.39
9.97 6.26
The technical data cited in this publication is not a guarantee of performance in which we assume legal, financial or contractual accountability. It is a representation of typical performance, and if requiredshould be relied on for specific applications only after due verification by the user.
EM-Field Characterization
Phi Cut Radiation PatternNormalized 5dB/div
Theta Cut Radiation PatternNormalized, 5 dB/div
0dB
-5dB
-10dB
-15dB
-20dB
The VESAmount version has four M4 studs 100mm spacedapart. It can be mounted on a standard 100mmVESAmountbracket. The mounting nuts are provided with the antenna.