aviation
WE iMPRovE SURFaCES!
tRoWaL SURFaCE FiniSHinG SoLUtionSFoR tHE aERoSPaCE inDUStRY
Walther Trowal started building surface finishing machinery as early as
1931. Since then the company has become the technological market lea-
der in the surface finishing industry by building a reputation of producing
first class finishing equipment featuring state of the art engineering and
sturdy design.
The term “Trowalizing” has even become part of the English language
and stands for innovative surface finishing processes. While the company’s
main focus is on surface finishing technologies, Trowal also furnishes so-
lutions for treating the waste water from mass finishing applications and
offers a line of coating equipment for the decorative or protective coating
of small, mass-produced parts.
With the knowhow accumulated for over 8 decades, we provide spe-
cial surface finishing solutions that are custom engineered to match our
customer’s technological requirements. And in our test labs in Germany,
USA and Asia we develop the optimum finishing processes for your com-
ponents.
Our technical concepts range from stand-alone systems all the way up to
fully automated finishing lines consisting of multiple machines which are
integrated into your overall manufacturing process.
It goes without saying that our equipment, our media & compounds as
well as our processes have been tested and are approved for use in the
aero space industry. Walther Trowal is DIN/ISO 9001:2008 certified and is
a tier 1 supplier to all OEM´s and MRO´s in the aerospace industry.
tRoWaL – the technological leader for more than 8 decades!
EnGinE PaRtS
Turbine components like fan blades, compressor blades, blisks, turbine
disks, engine casings, etc., require a perfect surface finish with low Ra rea-
dings. These are achieved by processing the parts in top of the line rotary
vibrators equipped with the “gate clearing” feature for gentle and 100%
unloading of the parts from the finishing machine. For somewhat more
intensive finishing processes high performance Turbotron centrifugal disk
finishing machines are utilized. And, the eco- friendly Trowapast finishing
process produces surface finishes with Ra readings of <= 0.2µm.
StRUCtURaL CoMPonEntS
Trowal tub vibrators allow the efficient, cost effective finishing of the sur-
face of large structural components used in wings, fuselages and landing
gears with lengths of up to 6,000 mm (20 ft) and a maximum width of
1,300 mm (4.3 ft). The proven “multi vib” vibratory drive system guaran-
tees an even, intensive movement of the media mass over the complete
length of the vibratory tub producing an absolutely homogeneous finish
on the parts surface.
otHER CoMPonEntS
Our latest technical development, the Multi Vibrator MV, allows the inten-
sive finishing of the inner and outer surface of hydraulic housings.
This versatile vibratory system is also ideally suited for processing delicate
components which must not touch each other during the vibratory fi-
nishing process.
Of course, Trowal also offers economic solutions for deburring mass pro-
duced bulk parts like screws, rivets, etc.
And, of course, such bulk parts can be efficiently coated in our “Rotamat”
coating systems for corrosion protection, visual differentiation and the dis-
sipation of static electricity.
trowal offers solutions for many aerospace finishing applications than 8 decades!
Walther Trowal GmbH & Co. KGRheinische Straße 35-37 | D-42781 HaanTel. +49(0)2129-571-0 | Fax +49(0)[email protected] | www.walther-trowal.de
Technische Änderungen vorbehalten 10 / 12 www.promise-marketing.de
Close customer relations are as important to us as the quality and durabi-
lity of our products.
The development of optimum surface finishing solutions in close consul-
tation with our customers and continuous customer support are key ele-
ments of our company philosophy.
Specifically, this includes
• In-depth technical consultation to develop the optimum finishing pro-
cesses for our customers
•Adaptation of our equipment designs to specific customer requirements
•Sample processing in our test labs in Germany, USA and Asia
• Trouble shooting (on site or off site via modem), maintenance and repair
service
Please contact us to help you with your surface finishing requirements.
Our process engineers stand ready to assist you at any time.
optimum surface finishing solutions for our customers
Fan bladesBlisks / blade disksEngine casings Structural partsBulk parts (screws, rivets, etc.)
Custom engineered equipmentProcess technologytraining Spare partsMaintenance and repairsWaste water treatment
DeburringEdge breaking, radiusingSurface smoothingPolishingCoating
Components Selection of the best finishing process
optimum customer service
DEKRA Cer t i f i c a t i on Gm bH * Hand we rk s t raße 15 * D-705 65 S tu t t ga r t * www. d ek ra -c e r t i f i c a t i on .de page 1 of 1
CERTIF ICATE
ISO 9001:2008 DEKRA Certification GmbH hereby certifies that the companyWalther Trowal GmbH & Co. KG
Scope of Supply: Consumables Scope of certification: Research, development, manufacturing, sales, technical consultation
for vibratory finishing technology and effluent treatment Certified location: D-42781 Haan, Rheinische Straße 35 - 37
has established and maintains a quality management system according to the above mentioned
standard. The conformity was adduced with audit report no. A12011434. This certificate is valid from 2012-05-23 to 2015-05-22 Certificate registration no.: 80506500/2
Duplicate
DEKRA Certification GmbH Stuttgart, 2012-05-23 L a c k o f f u l f i l m e n t o n c o n d i t i o n s a s s e t o u t i n t h e C e r t i f i c a t i o n A g r e e m e n t m a y r e n d e r t h i s c e r t i f i c a t e i n v a l i d .