Leaders in the design and manufacture of Polyurethane, Rubber and Industrial Plastic products.
BRO-A-133 V2.0.0
TruckProducts
TRUCK PRODUCTS
1National Plastics & Rubber
5
Caterpillar
4
32
8
4
7
16
National Plastics & Rubber 2
TRUCK PRODUCTS
1 - Step Nosing KitPRODUCT DETAILS ON PAGE 7Made to order.
To Suit Part Number
777 NPR1868
793 NPR1509
797F NPR1511
2 - Wheel Chocks & BracketsCHOCK SIZE TABLE ON PAGE 16Refer to the table to find the right size chock for your truck.
3 - Sound Suppression Mat (Diff)
To Suit Part Number
793D NPR1968
4 - ID NumbersPRODUCT DETAILS ON PAGE 14
5 - Body PadsPRODUCT DETAILS ON PAGE 8Available to suit 797, 793, 789. Contact us to find the right part number.
6 - FlexiFlapTM MudFlapMade to order.
To Suit Part Number
789C NPR1803
793D NPR1804
793F NPR1723
795F NPR1824
7 - Tray Support BlocksPRODUCT DETAILS ON PAGE 9
To Suit Part Number
793 NPR05233-00
8 - Louvered VentPRODUCT DETAILS ON PAGE 10
To Suit Part Number
795 NPR2395
Sound Suppression7mm thick fire resistant PVC matting used for general sound suppression. Cut to size for your application. Contact us with your requirments.
TRUCK PRODUCTS
3National Plastics & Rubber
Hitachi
4
2
3
6
1
78
3
5
National Plastics & Rubber 4
TRUCK PRODUCTS
1 - Step Nosing KitPRODUCT DETAILS ON PAGE 7Made to order. Contact us to find the right part number.
2 - Wheel Chocks & BracketsCHOCK SIZE TABLE ON PAGE 16Refer to the table to find the right size chock for your truck.
3 - ID NumbersPRODUCT DETAILS ON PAGE 14
4 - FlexiFlapTM MudFlapMade to order. Contact us to find the right part number.
5 - Body PadsPRODUCT DETAILS ON PAGE 8Available to suit EH4500 & EH4501. Contact us to find the right part number.
6 - Tray Support BlocksPRODUCT DETAILS ON PAGE 9Contact us to find the right part number.
7 - Axle Door Impact PadPRODUCT DETAILS ON PAGE 13
To Suit Part Number
EH5000 NPR2397
EH4000 NPR2397
8 - Louvered VentPRODUCT DETAILS ON PAGE 10
To Suit Part Number
EH5000 NPR2077
Sound Suppression7mm thick fire resistant PVC matting used for general sound suppression. Cut to size for your application. Contact us with your requirments.
TRUCK PRODUCTS
5National Plastics & Rubber
5
Komatsu
71
138
3
6
9
10
6
12
2
11
4
National Plastics & Rubber 6
TRUCK PRODUCTS
1 - Wheel Chocks & BracketsCHOCK SIZE TABLE ON PAGE 16Refer to the table to find the right size chock for your truck.
2 - Step Nosing KitPRODUCT DETAILS ON PAGE 7Made to order. Contact us to find the right part number.
3- Battery BoxTo Suit Part Number
830 NPR1874
930 NPR2557
4 - Body PadsPRODUCT DETAILS ON PAGE 8Contact us to find the right part number.
5 - FlexiFlapTM MudFlapAvailable to suit 830E & 960E. Made to order. Contact us to find the right part number.
6 - ID NumbersPRODUCT DETAILS ON PAGE 14
7 - MattcapPRODUCT DETAILS ON PAGE 11
To Suit Part Number
730 NPR06035-00
830 NPR06035-00
8 - Cable Clamp Split BlockPRODUCT DETAILS ON PAGE 12Custom Made.
9 - Tray Support BlocksPRODUCT DETAILS ON PAGE 9
To Suit Part Number
830 NPR05233-00
930 NPR05233-00
10 - Wheel Dust CoverContact us to find the right part number.
11 - Louvered VentPRODUCT DETAILS ON PAGE 10
To Suit Part Number
930E NPR2077
12 - Axle Door Impact PadPRODUCT DETAILS ON PAGE 13
INTERNAL LOCATION PAD
To Suit Part Number
830E NPR2227
DOOR COVER IMPACT PAD
To Suit Part Number
830E NPR2227
13 - Hydraulic Ram CoverTo Suit Part Number
930E NPR2310
Sound Suppression7mm thick fire resistant PVC matting used for general sound suppression. Cut to size for your application. Contact us with your requirments.
7National Plastics & Rubber
TRUCK PRODUCTS
Slip ResistantStep NosingNational Plastics & Rubber can supply heavy duty, slip resistant step nosing for applications ranging from the office, to airports, mine sites and offshore oil rigs.
» HEAVY DUTY COARSE GRAIN FOR MAXIMUM GRIP
» KITS CAN BE MADE FOR ANY MACHINE OR APPLICATION
Standard nosing is made using 1.6mm galvanized steel, 50mm tread and a 20mm rise. Nosing comes pre-drilled and supplied with fasteners. Other options are available on request.
» PRE-DRILLED & SUPPLIED WITH FASTENERS
National Plastics & Rubber 8
TRUCK PRODUCTS
bodypads
» HIGH QUALITY BODY PADS AVAILABLE TO SUIT:
» CATERPILLAR
» HITACHI
» KOMATSU
» TEREX
» TESTED AND PROVEN TO BE EQUIVALENT TO OEM PARTS
» NO MODIFICATION REQUIRED
» MADE IN AUSTRALIA
» PREMIUM GRADE RUBBER BONDED TO STEEL PLATES
9National Plastics & Rubber
TRUCK PRODUCTS
TraySupport BlocksTimber chocks have been shown to fail catastrophically during simulated hydraulics tests. National Plastics Tray Support Blocks are the safer alternative for truck maintenance.
» TRAY SUPPORT BLOCKS ARE MADE FROM LOAD RATED MATERIAL
» LIGHTER THAN EXISTING STEEL ALTERNATIVES
» WILL NOT SPLINTER OR WARP LIKE TIMBER
» RESISTANT TO MOST FUEL, OIL & CHEMICALS
FAILED TIMBER BLOCK
To Suit Komatsu 830 & 930and Caterpillar 793PART NO. NPR05233-00
Customer to conduct their own risk assessment based on application.
Don’t Risk It!
National Plastics & Rubber 10
TRUCK PRODUCTS
Louvered Vent » FLEXIBLE &
DURABLE DESIGN
» IMPACT RESISTANT
» LIGHTWEIGHT
» COST EFFECTIVE
» NON CORROSIVE
Louvered VentNPR06069 (LONG KIT)NPR05448 (SHORT KIT)
16kg
Individual Components
Louvered Vent NPR2077Vent Tube Long NPR06069-10Vent Tube Short NPR2206
To Suit
Komatsu 930E Rear Axle Exhaust Housing
Rear Diff VentNPR2395
8kg
To Suit
Caterpillar 795 Rear Axle Exhaust Housing
11National Plastics & Rubber
TRUCK PRODUCTS
MattCapthe innovatively designed mattcap, a safety award winner for an international mining company.The Mattcap has proven its benefits to the marketplace with its superior design.
» 75% LIGHTER THAN THE STEEL ALTERNATIVE
» FLEXIBLE BUT HOLDS ITS SHAPE
» IMPACT RESISTANT
» NON-CORROSIVE
» EASY TO VIEW OIL LEVELS
Mattcap to suitKomatsu 730E & 830EPART NO. NPR06035-00
Kit Includes
1 x Cap3 x Sight Glasses1 x Magnetic Plug1 x Valve1 x O Ring
National Plastics & Rubber 12
TRUCK PRODUCTS
Cable ClampSplit Block
» DURABLE POLYURETHANE
» WON’T SPLIT UNDER TENSION
» RESISTANT TO MOST CHEMICALS AND FUELS
» LASTS LONGER THAN CONVENTIONAL TIMBER CLAMPS
To Suit Komatsu 930-ePART NO. NPR1923
210mm x 62mm x 50mmwith 3 x Ø29mm holes & 2 x Ø19mm locating holes
To Suit Komatsu 803E Haul TruckPART NO. NPR1983
210mm x 62mm x 50mmc/w 2 x Ø28mm holes & 1 x Ø33mm locating holes
To Suit Komatsu 830E-ACPART NO. NPR1984
210mm x 62mm x 51mmc/w 3 x Ø25mm holes
To Suit Komatsu 830E-ACPART NO. NPR1985
210mm x 62mm x 51mmc/w 3 x Ø20mm holes
13National Plastics & Rubber
TRUCK PRODUCTS
Axle Doorimpact PadsDon’t lose machine availability due to preventable causes. These cost effective pads help to eliminate differential pressure leakage caused from damaged axle doors and help prevent damage from rock impact.
» AVAILABLE TO SUIT:
» KOMATSU 830
» HITACHI
» DURABLE
» FITS TO EXISTING OEM DOOR WITH ONLY SLIGHT MODIFICATIONS
» INTERNAL LOCATION PAD IN DIFF HOUSING PREVENTS DOORS FROM BEING LIFTED OFF THEIR HINGES
Axle DoorImpact Pad
Axle Door
Axle DoorInternal Location Pad
National Plastics & Rubber 14
TRUCK PRODUCTS
I.D NumbersNational Plastics & Rubber has a variety of Identification Numbers to suit your needs:
» HANGING I.D
» ROOFTOP I.D
» LED I.D
» MADE FROM DURABLE MATERIALS
» HIGHLY VISIBLE
» FITS UP TO 3 DIGITS
» EASY TO ATTACH
Rooftop I.DPART NO. NPR1606With Magnetic Base
500mm W
325mm H
Hanging I.dPART NO. NPR816Multiple Sizes Available
1020mm W
1200mm L
25mm D
LED I.DPART NO. NPR247824V Display
654.05mm W
438.15mm H
15National Plastics & Rubber
TRUCK PRODUCTS
WheelCHocksWorld Class Chocks.National Plastics & Rubber Wheel Chocks are tough and durable with sizes to cover almost every application from your family car to the largest mining trucks.
» LIGHTWEIGHT
» FIELD TESTED
» SLIP-RESISTANT, DURABLE POLYURETHANE
» ONE-PIECE CONSTRUCTION
» IMPERVIOUS TO CHEMICALS, SALTS, ROT AND RESISTANT TO FUEL, OIL & SOLVENTS
» WIDE RANGE OF SIZES TO SUIT EVERY APPLICATION
Make Series Tyre Size Width(MM)
Diameter (MM)
Suitable Wheel Chock Product Number
Caterpillar 797 59/80R63 1467 4017 Size 6 LW NPR984
Caterpillar 793C 40.00R51 1108 3575 Size 6 LW NPR984
Caterpillar 789 37.00R57 1043 3442 Size 6 LW NPR984
Caterpillar 789 37.00R57 1043 3442 Size 5 LW NPR2155
Caterpillar 785 33.00R51 932 3061 Size 4 LW NPR1329
Caterpillar 785 33.00R51 932 3061 Size 5 LW NPR2155
Caterpillar 777 27.00R49 750 2708 Size 4 LW NPR1329
Caterpillar 777 27.00R49 750 2708 Size 5 LW NPR2155
Caterpillar 775 24.00R35 660 2194 Size 4 LW NPR1329
Caterpillar 773 21.00R35 577 2048 Size 3.7 LW NPR1891
Caterpillar 769 18.00R33 515 1890 Size 3.7 LW NPR1891
Caterpillar 740 29.5-R25 850 1865 Size 3.7 LW NPR1891
Hitachi EH5000 53/80R63 1304 3828 Size 6 LW NPR984
Hitachi EH4500 50/90R57 1283 3840 Size 6 LW NPR984
Hitachi EH4000 46/90R57 1199 3576 Size 6 LW NPR984
Hitachi EH3500 37.00R57 1044 3422 Size 5 LW NPR2155
Hitachi AH250 23.5R25 600 1613 Size 3.7 LW NPR1891
Hitachi AH300 23.5R25 600 1613 Size 3.7 LW NPR1891
Hitachi AH400 29.5R25 756 1958 Size 3.7 LW NPR1891
Komatsu 930 53/80R63 1304 3828 Size 6 LW NPR984
Komatsu 830E 40.00R57 1127 3575 Size 6 LW NPR984
Komatsu 730E 37.00-R57 1044 3422 Size 6 LW NPR984
Komatsu 730E 37.00-R57 1044 3422 Size 5 LW NPR2155
Komatsu 630E 36.00R51 1015 3204 Size 5 LW NPR2155
Komatsu 785 27.00-R49 750 2692 Size 4 LW NPR1329
Komatsu HD465 24.00R35 660 2194 Size 4 LW NPR1329
Komatsu HD405 18.00R33 515 1890 Size 3.7 LW NPR1891
Liebherr T282 56/80R63 59/80R83 1467 4017 Size 6 LW NPR984
Terex MT4400 40.00R57 1127 3575 Size 6 LW NPR984
Terex TR60 24.00R35 660 2180 Size 4 LW NPR1329
Volvo A40F 29.5R25 756 1958 Size 3.7 LW NPR1891
Volvo A25F 25.5R25 673 1736 Size 3.7 LW NPR1891
Volvo A30F 750/65R25 738 1599 Size 3.7 LW NPR1891
National Plastics & Rubber 16
TRUCK PRODUCTS
Wheel Chock Size Guide - To Suit Dump Trucks
17National Plastics & Rubber
TRUCK PRODUCTS
» LOAD RATED - LABORATORY & INDEPENDENTLY TESTED
» UV STABILISED
» LIGHT WEIGHT - UP TO 30% LIGHTER THAN TIMBER & OTHER PRODUCTS
» TOUGH & SAFE - INTERLOCKING DESIGN FOR ADDED SAFETY
» STACKS UP TO 150CM (60”)
StackoTM
BlocksPerfect for your truck maintenance.StackoTM Blocks have been developed from the ground up as a superior alternative to traditional timber blocks. Manufactured from high quality UV stabilised materials ensures StackoTM Blocks will perform to expectations for the long term.
StackoTM Blocks are safe due to their interlocking design, up to 30% lighter than other products and are load rated with laboratory & independent testing.
National Plastics & Rubber 18
All our products undergo extensive Field testing.
National Plastics & Rubber’s commitment to our customers is to be the Best Industry Provider of polyurethane products to the global marketplace. Therefore, quality and reliability of our products is the concern and responsibility of every person in our organization.
As proof of our commitment to quality and to ensure our customers can depend on NPR products we conduct extensive field testing of all our products.
Our testing procedures push the limits far beyond what the customer will ever require from our products. Knowing our products can stand up to the harshest abuse lets us know you’ll be able to rely on them.
Products you can rely on!
EXTR
EM
E ROLLBACK TEST
UN
ASSISTED BY BREAKS
Copyright © 2018 National Plastics & Rubber. All Rights Reserved. Truck Products
nationalplastics.net.auEmail [email protected] Phone +617 3279 3066
National Plastics & Rubber has the experience and knowledge necessary to meet your needs.
National Plastics & Rubber promotes safe working practices therefore, performing your own risk assessment is essential before using these products.
We specialise in polyurethane, rubber and industrial plastics design and manufacturing for the mining, automotive and manufacturing industries.