False and True

Always examine the tool for damages before use.

True

It is OK to wear loose clothing, dangling objects and jewellery using hand tool.

False

Keep cords and hoses away from heat, oil and sharp edges. True

Use only tools and equipment in good condition.

True

It is OK to make adjustments or clear a jam while the power tool is running.

False

If any tool breaks or malfunctions, report it to your supervisor

immediately. False

False

Before connecting to a power source, make sure the power is on.

Safety glasses shall always be worn whenever you are using power hand

tool.True

There are several types of power tools, including electric, pneumatic,

hydraulic.True

Never use electric tools in wet conditions.

True

When not in use, power tools should be disconnected. Tru

e

Keep safe distance between your hands and all moving parts of the

power tool.True

Don’t leave a power tool unattended while it is running.

True

It is OK to startle someone who is using a power tool.

False

Use safety guards exactly as they are supposed to be used. Tru

e

When tightening a nut with an adjustable wrench, always pull the wrench toward you; never push the wrench away from you.

True

Plastic covered handles on wire-cutting pliers may be used to cut low-

voltage live electrical wire.

True

Screwdrivers may be used for purposes other than driving or removing screws, for example

as a chisel.

False

When selecting a standard screwdriver be certain that the tip is almost as thick and as

wide as the slot of the head of a screw.

True

When using a hacksaw, safety glasses must be worn.

True

When you are finished using a hacksaw, tension should be eased.

True