UQ400Trunnion Machining Center

Specifications

All specifications are subject to change without prior noticeVerification of technical changes may be confirmed after receipt of order

UQ400 Page 2

Designed and built by Wele Mechatronic in Taiwan, this machining center is sold and serviced exclusively by Toyoda Machinery USA and our exclusive representatives in the Americas.

Machine Specifications (All Models, Unless Otherwise Indicated):

Stroke Unit Specifications

X Axis Travel (Head Movement) mm (in) 400 (15.7)

Y Axis Travel (Gantry Movement) mm (in) 650 (25.6)

Z Axis Travel (Head Stock Movement) mm (in) 0~485 (0~19.1)

Distance from Spindle Nose to Table Top mm (in) 0 - 485 (0 – 19.1)

Guideways (X/Y/Z) 35/45/45

Table Unit Specifications

Table Area mm (in) 320/12.5

Table Load Capacity Kg/lbs. 200/704

Maximum Work Piece (Dia. /Length) Mm (in) 400*300 / 15.7” * 11.8”

Swiveling Range of A-Axis Degree +30 / -120

Rotating Range of C-Axis Degree 360

Swiveling A-Axis / C-Axis Rotating rpm 20/25

Spindle Unit Specifications

Spindle Taper type BCV40 (CAT 40 BIG PLUS)

Spindle Motor (Cont. / 30 Min. Rating) kW (hp) 15 / 18.5 (20 / 25)

Spindle Speed rpm 15 ~ 15,000 min -1

Peak Spindle Output Torque Nm (ft lbs) 110/125 (81/92

Feed Rates Unit Specifications

Rapid Feedrate (X and Y Axes) m/min (ipm) 36 (1,417)

Rapid Feedrate (Z Axis) m/min (ipm) 30 (1181)

Maximum Cutting Feedrate m/min (ipm) 10 (394)

Maximum Cutting Feedrate m/min (ipm) 10 (394)

Accuracy (JIS) Unit Specifications

Positioning Accuracy X,Y & Z mm (in) ±.01 (±.0004)

Repeatability mm (in) ±.003 (±.0001)

Indexing Axial Positioning Accuracy Arc/sec A Axis 30 / C Axis 20

Indexing Axial Repeatability Arc/ sec A Axis 6 / C Axis 4

UQ400 Page 3

Note: Machine is 220V / 3 Phase / 60 Hz. Any other voltage requires a transformer (not supplied as std.)* Specifications are approximate, please verify upon ordering

Coolant System Unit Specifications

Coolant Tank Capacity* gal 105

Flood Coolant (Gallons per Minute)* gal 20

ATC - 40 Tool Magazine Unit Specifications

Tool Magazine Capacity - CT40 number 40

Maximum Tool Diameter / Tool in Adjacent Pocket - CT40 mm (in) 80 (3.15)

Maximum Tool Diameter / Adjacent Pocket Empty - CT40 mm (in) 125 (4.92)

Maximum Tool Length from Gage Line - CT40 mm (in) 300 (11.8)

Maximum Tool Weight - CT40 kg (lb) 7 (15.4)

Tool Taper type CAT40

Pull Stud type ANSI CAT40

Tool Change Time: Tool to Tool sec 3

Tool Selection type Random

Tool Access type Bi-directional

Control Unit Specifications

Control Type type Fanuc Oi M-D

Utilities Unit Specifications

Power Required v (kVA) 3 Phase ±10% 220 (40)

Air Pressure psi 100

Power Supply Frequency Hz 50 / 60

Dimensions* Unit Specifications

Length mm (in) 2950 (116.1)

Width mm (in) 2,350 (92.5)

Height mm (in) 3.140 (123.6)

Weight kg (lb) 6,500 (14,300)

UQ400 Page 4

Pricing:

UQ400 4+1 #40 Taper Direct Drive 15,000 RPM Spindle $189,000

Machine Options:

Scrapper Type Chip Conveyor (Factory order only) $5,000

Chip Blaster D-30-35 Medium Pressure Coolant System 20 Bar (290 PSI, Tank Not Included Unit Pricing Includes Plumbing, Electrical Installation Kit and Installation Guide

$5,855

CTS Unit Pricing Includes Plumbing, Electrical Installation Kit and Installation Guide,Installation is Not Included

AICC Contour Control II PCB Fast Ethernet/Data Server,1 Gig Memory Card, Operator's Manual, Ethernet Function Software, Fast Data Server Function Software, Installation by Fanuc Technician after Completion of Initial Machine Installation. Addition of this option is not to be confused with HPCC, as it will not change the standard block look ahead of 40. This option will allow Stealth users to connect their machine to Ethernet for DNC use via FTP, or expand at machine accessibility of programs / program storage in addition to the memory card slot already provided on the operator's pendant.

$6,770

Upgrade Part Program Storage Capacity 2,048Kbyte (5120m) 2,095

Increase from 40 Block Look Ahead to 200 Block Look Ahead $1,695

Multi Step Skip Function Required when both a Spindle Probe and Tool Measurement Device are installed

$1,020

UQ400 Page 5

Miscellaneous

Price is F.O.B. Port of Entry

Toyoda’s responsibility ceases when delivery is made to the carrier.

Any claim for loss and/or damage must be made by the purchaser against the carrier.

One (1) Year Parts and Labor Warranty on Machine and Control

Delivery Estimated 2 months shipment from the factory 3 months in port of LAFirm delivery will be given prior to order placement.

Machine Training, Set-Up and Warranty Labor

Via Toyoda or Authorized Distributor

Place of Shipment

Port of Entry, unless otherwise stated

Time of Quote Validity

Ninety (90) Days, unless otherwise stated

Payment Terms

Ten (10%) Percent with Purchase Order

Eighty (80%) Percent Upon Shipment

Ten (10%) Percent Thirty (30) Days from Shipment

UQ400 Page 6

Control Specifications:

Specifications of Fanuc Oi MD Control Function Description8.4" LCD

Absolute / Increment CommandAddition of Custom Macro Common Variables #100～#199, #500～#999Addition of Workpiece Coordinate System PairAI Nano CC Look-Ahead 40 bps (AI HPCC is not Available)Alarm DisplayAlarm History DisplayAutomatic Corner OverrideAutomatic Power Off M30Background EditingBacklash CompensationCanned Cycles G74, G76, G80, G81, G84~G89Canned Cycles for Drilling G73, G83Circular Interpolation G02, G03Conical / Spiral InterpolationControllable Axes 4 AxesCoordinate System Rotation G68, G69Custom Macro BCutting Feedrate CommandCutting Feedrate Override 0, 10%, 20%, 30%, …,150%Cylindrical InterpolationDecimal Point Programming / Pocket Calc Type Decimal Point ProgrammingDry RunDwell G04Emergency StopEthernet Interface (RJ45)Exact Stop G09Exact Stop Mode G61Extend Program EditFANUC Semi-Operator PanelFeedrate Speed SettingG Code Program Mirror Function G50.1 / G51.1Graphic DisplayHandle InterruptionHandle Wheel Feedrate 1 Handle WheelHandle Wheel Override Override X1, X10, X100Helical InterpolationHRV3 Control HRV 3InterpolationInterpolation Pitch Error Compensation Standard EquipmentLeast Programmable Increment 0.001mm / 0.0001" / 0.001ºLimit Check Before MovementLinear Acceleration/Deceleration after Cutting FeedLinear Interpolation G01Machine LockManual Reference Position Return G28Maximum Command Value ± 99999.999M-Code Blush M07

UQ400 Page 7

Control Specifications (Continued):Specifications of Fanuc Oi MD Control Function DescriptionMetric / Inches Conversion G20, G21MST FunctionOperation History DisplayOperator Message History DisplayOptional Chamfering / Corner ROptional Single Block SkipPC MCIA Memory Card Slot On CNC PendantPlane Selection G17, G18, G19PlaybackPolar Coordinate Command G15, G16Program Number Display O4 digitsProgram RestartProgram Single Block Number N5 DigitsProgram Start / Movement Hold M00, M01Program Stop / Program End M02, M30Program Storage 1,280 M (512 kB)Programmable Data Input G10Rapid Movement Percentage F0, 25%, 50%, 100%Rapid Positioning G00Rapid Traverse Bell-Shaped Acceleration / DecelerationRegistered Program Number 400 PcsRemote DiagnosticRigid Tapping M29RS232 InterfaceRun Hour and Parts Count DisplayScalingSimultaneous Axes 4 AxesSingle BlockSingle Direction Positioning G60Soft Limit SettingSpindle Positioning M19Spindle Speed Override 50%, 60%, 70%, …, 120%Sub-Program Call 4 LevelsTool Offset 400 SetsTool Offset Memory CTool Offset Value Counter InputTool Positioning Offset G45～G48Tool Radius Compensation C G40, G41, G42Workpiece Coordinate System G54～G59Z Axis Lock

UQ400 Page 8

Included with this Model:

1.10.4” Color LCD Display

3.Chip Wash Gun

4.Conversational FANUC Manual Guide 0i

5.Coolant System Including Tank & Pumps

7.Full Enclosure Splash Guard

8.15,000 DD 25 hp Spindle Motor

9.Hand Tool Box

10.Helical Interpolation

11.Lift Up Type Hinged Bent Chip Conveyor (47“ drop height)

12.Manual Pulse Generator (Hand Wheel)

13.Operation and Maintenance Manual, Fanuc Manuals

14. Precision Linear Guideways

15.Rigid Tapping

16.Spindle Oil Cooler

17.40 Pocket ATC #40 Taper

18.Three (3) Tier Status / Alarm Lamp

19.Fixed & Adjustable Work Light

20.Dual chip augers in Y Axis direction

UQ400 Page 9 9-22-2015AQ850 Page 9

Spindles

Power & Torque CAT40 15,000 Direct Driven (Option)

UQ400 Page 10

Retention Knob & Tool Assembly CAT40

UQ400 Page 11

Machine Travel Over View

UQ400 Page 12

Machine Layout