38
ATTUNE ® KNEE SYSTEM ORDERING INFORMATION
ATTUNE® KNEE SYSTEM ORDERING INFORMATION
2 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
FEMORAL COMPONENTSCruciate Retaining (CR) Cemented
Part Number Description1504-00-101 ATTUNE CR Cemented Femoral Size 1 Left1504-00-102 ATTUNE CR Cemented Femoral Size 2 Left1504-00-123 ATTUNE CR Cemented Femoral Size 3 Narrow Left1504-00-103 ATTUNE CR Cemented Femoral Size 3 Left1504-00-124 ATTUNE CR Cemented Femoral Size 4 Narrow Left1504-00-104 ATTUNE CR Cemented Femoral Size 4 Left1504-00-125 ATTUNE CR Cemented Femoral Size 5 Narrow Left1504-00-105 ATTUNE CR Cemented Femoral Size 5 Left1504-00-126 ATTUNE CR Cemented Femoral Size 6 Narrow Left1504-00-106 ATTUNE CR Cemented Femoral Size 6 Left1504-00-107 ATTUNE CR Cemented Femoral Size 7 Left1504-00-108 ATTUNE CR Cemented Femoral Size 8 Left1504-00-109 ATTUNE CR Cemented Femoral Size 9 Left1504-00-110 ATTUNE CR Cemented Femoral Size 10 Left1504-00-201 ATTUNE CR Cemented Femoral Size 1 Right1504-00-202 ATTUNE CR Cemented Femoral Size 2 Right1504-00-223 ATTUNE CR Cemented Femoral Size 3 Narrow Right1504-00-203 ATTUNE CR Cemented Femoral Size 3 Right1504-00-224 ATTUNE CR Cemented Femoral Size 4 Narrow Right1504-00-204 ATTUNE CR Cemented Femoral Size 4 Right1504-00-225 ATTUNE CR Cemented Femoral Size 5 Narrow Right1504-00-205 ATTUNE CR Cemented Femoral Size 5 Right1504-00-226 ATTUNE CR Cemented Femoral Size 6 Narrow Right1504-00-206 ATTUNE CR Cemented Femoral Size 6 Right1504-00-207 ATTUNE CR Cemented Femoral Size 7 Right1504-00-208 ATTUNE CR Cemented Femoral Size 8 Right1504-00-209 ATTUNE CR Cemented Femoral Size 9 Right1504-00-210 ATTUNE CR Cemented Femoral Size 10 Right
3 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
FEMORAL COMPONENTSPosterior Stabilized (PS) Cemented
Part Number Description1504-10-101 ATTUNE PS Cemented Femoral Size 1 Left1504-10-102 ATTUNE PS Cemented Femoral Size 2 Left1504-10-123 ATTUNE PS Cemented Femoral Size 3 Narrow Left1504-10-103 ATTUNE PS Cemented Femoral Size 3 Left1504-10-124 ATTUNE PS Cemented Femoral Size 4 Narrow Left1504-10-104 ATTUNE PS Cemented Femoral Size 4 Left1504-10-125 ATTUNE PS Cemented Femoral Size 5 Narrow Left1504-10-105 ATTUNE PS Cemented Femoral Size 5 Left1504-10-126 ATTUNE PS Cemented Femoral Size 6 Narrow Left1504-10-106 ATTUNE PS Cemented Femoral Size 6 Left1504-10-107 ATTUNE PS Cemented Femoral Size 7 Left1504-10-108 ATTUNE PS Cemented Femoral Size 8 Left1504-10-109 ATTUNE PS Cemented Femoral Size 9 Left1504-10-110 ATTUNE PS Cemented Femoral Size 10 Left1504-10-201 ATTUNE PS Cemented Femoral Size 1 Right1504-10-202 ATTUNE PS Cemented Femoral Size 2 Right1504-10-223 ATTUNE PS Cemented Femoral Size 3 Narrow Right1504-10-203 ATTUNE PS Cemented Femoral Size 3 Right1504-10-224 ATTUNE PS Cemented Femoral Size 4 Narrow Right1504-10-204 ATTUNE PS Cemented Femoral Size 4 Right1504-10-225 ATTUNE PS Cemented Femoral Size 5 Narrow Right1504-10-205 ATTUNE PS Cemented Femoral Size 5 Right1504-10-226 ATTUNE PS Cemented Femoral Size 6 Narrow Right1504-10-206 ATTUNE PS Cemented Femoral Size 6 Right1504-10-207 ATTUNE PS Cemented Femoral Size 7 Right1504-10-208 ATTUNE PS Cemented Femoral Size 8 Right1504-10-209 ATTUNE PS Cemented Femoral Size 9 Right1504-10-210 ATTUNE PS Cemented Femoral Size 10 Right
4 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
Part Number Description1516-20-105 ATTUNE CR FB Insert Size 1 5 mm1516-20-106 ATTUNE CR FB Insert Size 1 6 mm1516-20-107 ATTUNE CR FB Insert Size 1 7 mm1516-20-108 ATTUNE CR FB Insert Size 1 8 mm1516-20-110 ATTUNE CR FB Insert Size 1 10 mm1516-20-112 ATTUNE CR FB Insert Size 1 12 mm1516-20-114 ATTUNE CR FB Insert Size 1 14 mm1516-20-116 ATTUNE CR FB Insert Size 1 16 mm1516-20-205 ATTUNE CR FB Insert Size 2 5 mm1516-20-206 ATTUNE CR FB Insert Size 2 6 mm1516-20-207 ATTUNE CR FB Insert Size 2 7 mm1516-20-208 ATTUNE CR FB Insert Size 2 8 mm1516-20-210 ATTUNE CR FB Insert Size 2 10 mm1516-20-212 ATTUNE CR FB Insert Size 2 12 mm1516-20-214 ATTUNE CR FB Insert Size 2 14 mm1516-20-216 ATTUNE CR FB Insert Size 2 16 mm1516-20-305 ATTUNE CR FB Insert Size 3 5 mm1516-20-306 ATTUNE CR FB Insert Size 3 6 mm1516-20-307 ATTUNE CR FB Insert Size 3 7 mm1516-20-308 ATTUNE CR FB Insert Size 3 8 mm1516-20-310 ATTUNE CR FB Insert Size 3 10 mm1516-20-312 ATTUNE CR FB Insert Size 3 12 mm1516-20-314 ATTUNE CR FB Insert Size 3 14 mm1516-20-316 ATTUNE CR FB Insert Size 3 16 mm1516-20-405 ATTUNE CR FB Insert Size 4 5 mm1516-20-406 ATTUNE CR FB Insert Size 4 6 mm1516-20-407 ATTUNE CR FB Insert Size 4 7 mm1516-20-408 ATTUNE CR FB Insert Size 4 8 mm1516-20-410 ATTUNE CR FB Insert Size 4 10 mm1516-20-412 ATTUNE CR FB Insert Size 4 12 mm1516-20-414 ATTUNE CR FB Insert Size 4 14 mm1516-20-416 ATTUNE CR FB Insert Size 4 16 mm1516-20-505 ATTUNE CR FB Insert Size 5 5 mm1516-20-506 ATTUNE CR FB Insert Size 5 6 mm1516-20-507 ATTUNE CR FB Insert Size 5 7 mm1516-20-508 ATTUNE CR FB Insert Size 5 8 mm1516-20-510 ATTUNE CR FB Insert Size 5 10 mm1516-20-512 ATTUNE CR FB Insert Size 5 12 mm1516-20-514 ATTUNE CR FB Insert Size 5 14 mm1516-20-516 ATTUNE CR FB Insert Size 5 16 mm1516-20-605 ATTUNE CR FB Insert Size 6 5 mm1516-20-606 ATTUNE CR FB Insert Size 6 6 mm1516-20-607 ATTUNE CR FB Insert Size 6 7 mm1516-20-608 ATTUNE CR FB Insert Size 6 8 mm1516-20-610 ATTUNE CR FB Insert Size 6 10 mm1516-20-612 ATTUNE CR FB Insert Size 6 12 mm1516-20-614 ATTUNE CR FB Insert Size 6 14 mm1516-20-616 ATTUNE CR FB Insert Size 6 16 mm
Part Number Description1516-20-705 ATTUNE CR FB Insert Size 7 5 mm1516-20-706 ATTUNE CR FB Insert Size 7 6 mm1516-20-707 ATTUNE CR FB Insert Size 7 7 mm1516-20-708 ATTUNE CR FB Insert Size 7 8 mm1516-20-710 ATTUNE CR FB Insert Size 7 10 mm1516-20-712 ATTUNE CR FB Insert Size 7 12 mm1516-20-714 ATTUNE CR FB Insert Size 7 14 mm1516-20-716 ATTUNE CR FB Insert Size 7 16 mm1516-20-805 ATTUNE CR FB Insert Size 8 5 mm1516-20-806 ATTUNE CR FB Insert Size 8 6 mm1516-20-807 ATTUNE CR FB Insert Size 8 7 mm1516-20-808 ATTUNE CR FB Insert Size 8 8 mm1516-20-810 ATTUNE CR FB Insert Size 8 10 mm1516-20-812 ATTUNE CR FB Insert Size 8 12 mm1516-20-814 ATTUNE CR FB Insert Size 8 14 mm1516-20-816 ATTUNE CR FB Insert Size 8 16 mm1516-20-905 ATTUNE CR FB Insert Size 9 5 mm1516-20-906 ATTUNE CR FB Insert Size 9 6 mm1516-20-907 ATTUNE CR FB Insert Size 9 7 mm1516-20-908 ATTUNE CR FB Insert Size 9 8 mm1516-20-910 ATTUNE CR FB Insert Size 9 10 mm1516-20-912 ATTUNE CR FB Insert Size 9 12 mm1516-20-914 ATTUNE CR FB Insert Size 9 14 mm1516-20-916 ATTUNE CR FB Insert Size 9 16 mm1516-21-005 ATTUNE CR FB Insert Size 10 5 mm1516-21-006 ATTUNE CR FB Insert Size 10 6 mm1516-21-007 ATTUNE CR FB Insert Size 10 7 mm1516-21-008 ATTUNE CR FB Insert Size 10 8 mm1516-21-010 ATTUNE CR FB Insert Size 10 10 mm1516-21-012 ATTUNE CR FB Insert Size 10 12 mm1516-21-014 ATTUNE CR FB Insert Size 10 14 mm1516-21-016 ATTUNE CR FB Insert Size 10 16 mm
TIBIAL INSERTSCruciate Retaining (CR) Fixed Bearing (FB)
5 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
TIBIAL INSERTSPosterior Stabilized (PS) Fixed Bearing (FB)
Part Number Description1516-40-105 ATTUNE PS FB Insert Size 1 5 mm1516-40-106 ATTUNE PS FB Insert Size 1 6 mm1516-40-107 ATTUNE PS FB Insert Size 1 7 mm1516-40-108 ATTUNE PS FB Insert Size 1 8 mm1516-40-110 ATTUNE PS FB Insert Size 1 10 mm1516-40-112 ATTUNE PS FB Insert Size 1 12 mm1516-40-114 ATTUNE PS FB Insert Size 1 14 mm1516-40-116 ATTUNE PS FB Insert Size 1 16 mm1516-40-118 ATTUNE PS FB Insert Size 1 18 mm1516-40-205 ATTUNE PS FB Insert Size 2 5 mm1516-40-206 ATTUNE PS FB Insert Size 2 6 mm1516-40-207 ATTUNE PS FB Insert Size 2 7 mm1516-40-208 ATTUNE PS FB Insert Size 2 8 mm1516-40-210 ATTUNE PS FB Insert Size 2 10 mm1516-40-212 ATTUNE PS FB Insert Size 2 12 mm1516-40-214 ATTUNE PS FB Insert Size 2 14 mm1516-40-216 ATTUNE PS FB Insert Size 2 16 mm1516-40-218 ATTUNE PS FB Insert Size 2 18 mm1516-40-305 ATTUNE PS FB Insert Size 3 5 mm1516-40-306 ATTUNE PS FB Insert Size 3 6 mm1516-40-307 ATTUNE PS FB Insert Size 3 7 mm1516-40-308 ATTUNE PS FB Insert Size 3 8 mm1516-40-310 ATTUNE PS FB Insert Size 3 10 mm1516-40-312 ATTUNE PS FB Insert Size 3 12 mm1516-40-314 ATTUNE PS FB Insert Size 3 14 mm1516-40-316 ATTUNE PS FB Insert Size 3 16 mm1516-40-318 ATTUNE PS FB Insert Size 3 18 mm1516-40-320 ATTUNE PS FB Insert Size 3 20 mm1516-40-405 ATTUNE PS FB Insert Size 4 5 mm1516-40-406 ATTUNE PS FB Insert Size 4 6 mm1516-40-407 ATTUNE PS FB Insert Size 4 7 mm1516-40-408 ATTUNE PS FB Insert Size 4 8 mm1516-40-410 ATTUNE PS FB Insert Size 4 10 mm1516-40-412 ATTUNE PS FB Insert Size 4 12 mm1516-40-414 ATTUNE PS FB Insert Size 4 14 mm1516-40-416 ATTUNE PS FB Insert Size 4 16 mm1516-40-418 ATTUNE PS FB Insert Size 4 18 mm1516-40-420 ATTUNE PS FB Insert Size 4 20 mm1516-40-505 ATTUNE PS FB Insert Size 5 5 mm1516-40-506 ATTUNE PS FB Insert Size 5 6 mm1516-40-507 ATTUNE PS FB Insert Size 5 7 mm1516-40-508 ATTUNE PS FB Insert Size 5 8 mm1516-40-510 ATTUNE PS FB Insert Size 5 10 mm1516-40-512 ATTUNE PS FB Insert Size 5 12 mm1516-40-514 ATTUNE PS FB Insert Size 5 14 mm1516-40-516 ATTUNE PS FB Insert Size 5 16 mm1516-40-518 ATTUNE PS FB Insert Size 5 18 mm1516-40-520 ATTUNE PS FB Insert Size 5 20 mm1516-40-605 ATTUNE PS FB Insert Size 6 5 mm1516-40-606 ATTUNE PS FB Insert Size 6 6 mm1516-40-607 ATTUNE PS FB Insert Size 6 7 mm1516-40-608 ATTUNE PS FB Insert Size 6 8 mm1516-40-610 ATTUNE PS FB Insert Size 6 10 mm1516-40-612 ATTUNE PS FB Insert Size 6 12 mm1516-40-614 ATTUNE PS FB Insert Size 6 14 mm1516-40-616 ATTUNE PS FB Insert Size 6 16 mm1516-40-618 ATTUNE PS FB Insert Size 6 18 mm1516-40-620 ATTUNE PS FB Insert Size 6 20 mm
Part Number Description1516-40-705 ATTUNE PS FB Insert Size 7 5 mm1516-40-706 ATTUNE PS FB Insert Size 7 6 mm1516-40-707 ATTUNE PS FB Insert Size 7 7 mm1516-40-708 ATTUNE PS FB Insert Size 7 8 mm1516-40-710 ATTUNE PS FB Insert Size 7 10 mm1516-40-712 ATTUNE PS FB Insert Size 7 12 mm1516-40-714 ATTUNE PS FB Insert Size 7 14 mm1516-40-716 ATTUNE PS FB Insert Size 7 16 mm1516-40-718 ATTUNE PS FB Insert Size 7 18 mm1516-40-720 ATTUNE PS FB Insert Size 7 20 mm1516-40-805 ATTUNE PS FB Insert Size 8 5 mm1516-40-806 ATTUNE PS FB Insert Size 8 6 mm1516-40-807 ATTUNE PS FB Insert Size 8 7 mm1516-40-808 ATTUNE PS FB Insert Size 8 8 mm1516-40-810 ATTUNE PS FB Insert Size 8 10 mm1516-40-812 ATTUNE PS FB Insert Size 8 12 mm1516-40-814 ATTUNE PS FB Insert Size 8 14 mm1516-40-816 ATTUNE PS FB Insert Size 8 16 mm1516-40-818 ATTUNE PS FB Insert Size 8 18 mm1516-40-820 ATTUNE PS FB Insert Size 8 20 mm1516-40-905 ATTUNE PS FB Insert Size 9 5 mm1516-40-906 ATTUNE PS FB Insert Size 9 6 mm1516-40-907 ATTUNE PS FB Insert Size 9 7 mm1516-40-908 ATTUNE PS FB Insert Size 9 8 mm1516-40-910 ATTUNE PS FB Insert Size 9 10 mm1516-40-912 ATTUNE PS FB Insert Size 9 12 mm1516-40-914 ATTUNE PS FB Insert Size 9 14 mm1516-40-916 ATTUNE PS FB Insert Size 9 16 mm1516-40-918 ATTUNE PS FB Insert Size 9 18 mm1516-40-920 ATTUNE PS FB Insert Size 9 20 mm1516-41-005 ATTUNE PS FB Insert Size 10 5 mm1516-41-006 ATTUNE PS FB Insert Size 10 6 mm1516-41-007 ATTUNE PS FB Insert Size 10 7 mm1516-41-008 ATTUNE PS FB Insert Size 10 8 mm1516-41-010 ATTUNE PS FB Insert Size 10 10 mm1516-41-012 ATTUNE PS FB Insert Size 10 12 mm1516-41-014 ATTUNE PS FB Insert Size 10 14 mm1516-41-016 ATTUNE PS FB Insert Size 10 16 mm1516-41-018 ATTUNE PS FB Insert Size 10 18 mm1516-41-020 ATTUNE PS FB Insert Size 10 20 mm
6 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
TIBIAL INSERTSCruciate Retaining (CR) Rotating Platform (RP)
Part Number Description1516-30-105 ATTUNE CR RP Insert Size 1 5 mm1516-30-106 ATTUNE CR RP Insert Size 1 6 mm1516-30-107 ATTUNE CR RP Insert Size 1 7 mm1516-30-108 ATTUNE CR RP Insert Size 1 8 mm1516-30-110 ATTUNE CR RP Insert Size 1 10 mm1516-30-112 ATTUNE CR RP Insert Size 1 12 mm1516-30-114 ATTUNE CR RP Insert Size 1 14 mm1516-30-116 ATTUNE CR RP Insert Size 1 16 mm1516-30-205 ATTUNE CR RP Insert Size 2 5 mm1516-30-206 ATTUNE CR RP Insert Size 2 6 mm1516-30-207 ATTUNE CR RP Insert Size 2 7 mm1516-30-208 ATTUNE CR RP Insert Size 2 8 mm1516-30-210 ATTUNE CR RP Insert Size 2 10 mm1516-30-212 ATTUNE CR RP Insert Size 2 12 mm1516-30-214 ATTUNE CR RP Insert Size 2 14 mm1516-30-216 ATTUNE CR RP Insert Size 2 16 mm1516-30-305 ATTUNE CR RP Insert Size 3 5 mm1516-30-306 ATTUNE CR RP Insert Size 3 6 mm1516-30-307 ATTUNE CR RP Insert Size 3 7 mm1516-30-308 ATTUNE CR RP Insert Size 3 8 mm1516-30-310 ATTUNE CR RP Insert Size 3 10 mm1516-30-312 ATTUNE CR RP Insert Size 3 12 mm1516-30-314 ATTUNE CR RP Insert Size 3 14 mm1516-30-316 ATTUNE CR RP Insert Size 3 16 mm1516-30-405 ATTUNE CR RP Insert Size 4 5 mm1516-30-406 ATTUNE CR RP Insert Size 4 6 mm1516-30-407 ATTUNE CR RP Insert Size 4 7 mm1516-30-408 ATTUNE CR RP Insert Size 4 8 mm1516-30-410 ATTUNE CR RP Insert Size 4 10 mm1516-30-412 ATTUNE CR RP Insert Size 4 12 mm1516-30-414 ATTUNE CR RP Insert Size 4 14 mm1516-30-416 ATTUNE CR RP Insert Size 4 16 mm1516-30-505 ATTUNE CR RP Insert Size 5 5 mm1516-30-506 ATTUNE CR RP Insert Size 5 6 mm1516-30-507 ATTUNE CR RP Insert Size 5 7 mm1516-30-508 ATTUNE CR RP Insert Size 5 8 mm1516-30-510 ATTUNE CR RP Insert Size 5 10 mm1516-30-512 ATTUNE CR RP Insert Size 5 12 mm1516-30-514 ATTUNE CR RP Insert Size 5 14 mm1516-30-516 ATTUNE CR RP Insert Size 5 16 mm1516-30-605 ATTUNE CR RP Insert Size 6 5 mm1516-30-606 ATTUNE CR RP Insert Size 6 6 mm1516-30-607 ATTUNE CR RP Insert Size 6 7 mm1516-30-608 ATTUNE CR RP Insert Size 6 8 mm1516-30-610 ATTUNE CR RP Insert Size 6 10 mm1516-30-612 ATTUNE CR RP Insert Size 6 12 mm1516-30-614 ATTUNE CR RP Insert Size 6 14 mm1516-30-616 ATTUNE CR RP Insert Size 6 16 mm1516-30-705 ATTUNE CR RP Insert Size 7 5 mm1516-30-706 ATTUNE CR RP Insert Size 7 6 mm1516-30-707 ATTUNE CR RP Insert Size 7 7 mm1516-30-708 ATTUNE CR RP Insert Size 7 8 mm
Part Number Description1516-30-710 ATTUNE CR RP Insert Size 7 10 mm1516-30-712 ATTUNE CR RP Insert Size 7 12 mm1516-30-714 ATTUNE CR RP Insert Size 7 14 mm1516-30-716 ATTUNE CR RP Insert Size 7 16 mm1516-30-805 ATTUNE CR RP Insert Size 8 5 mm1516-30-806 ATTUNE CR RP Insert Size 8 6 mm1516-30-807 ATTUNE CR RP Insert Size 8 7 mm1516-30-808 ATTUNE CR RP Insert Size 8 8 mm1516-30-810 ATTUNE CR RP Insert Size 8 10 mm1516-30-812 ATTUNE CR RP Insert Size 8 12 mm1516-30-814 ATTUNE CR RP Insert Size 8 14 mm1516-30-816 ATTUNE CR RP Insert Size 8 16 mm1516-30-905 ATTUNE CR RP Insert Size 9 5 mm1516-30-906 ATTUNE CR RP Insert Size 9 6 mm1516-30-907 ATTUNE CR RP Insert Size 9 7 mm1516-30-908 ATTUNE CR RP Insert Size 9 8 mm1516-30-910 ATTUNE CR RP Insert Size 9 10 mm1516-30-912 ATTUNE CR RP Insert Size 9 12 mm1516-30-914 ATTUNE CR RP Insert Size 9 14 mm1516-30-916 ATTUNE CR RP Insert Size 9 16 mm1516-31-005 ATTUNE CR RP Insert Size 10 5 mm1516-31-006 ATTUNE CR RP Insert Size 10 6 mm1516-31-007 ATTUNE CR RP Insert Size 10 7 mm1516-31-008 ATTUNE CR RP Insert Size 10 8 mm1516-31-010 ATTUNE CR RP Insert Size 10 10 mm1516-31-012 ATTUNE CR RP Insert Size 10 12 mm1516-31-014 ATTUNE CR RP Insert Size 10 14 mm1516-31-016 ATTUNE CR RP Insert Size 10 16 mm
7 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
TIBIAL INSERTSPosterior Stabilized (PS) Rotating Platform (RP)
Part Number Description1516-50-105 ATTUNE PS RP Insert Size 1 5 mm1516-50-106 ATTUNE PS RP Insert Size 1 6 mm1516-50-107 ATTUNE PS RP Insert Size 1 7 mm1516-50-108 ATTUNE PS RP Insert Size 1 8 mm1516-50-110 ATTUNE PS RP Insert Size 1 10 mm1516-50-112 ATTUNE PS RP Insert Size 1 12 mm1516-50-114 ATTUNE PS RP Insert Size 1 14 mm1516-50-116 ATTUNE PS RP Insert Size 1 16 mm1516-50-118 ATTUNE PS RP Insert Size 1 18 mm1516-50-205 ATTUNE PS RP Insert Size 2 5 mm1516-50-206 ATTUNE PS RP Insert Size 2 6 mm1516-50-207 ATTUNE PS RP Insert Size 2 7 mm1516-50-208 ATTUNE PS RP Insert Size 2 8 mm1516-50-210 ATTUNE PS RP Insert Size 2 10 mm1516-50-212 ATTUNE PS RP Insert Size 2 12 mm1516-50-214 ATTUNE PS RP Insert Size 2 14 mm1516-50-216 ATTUNE PS RP Insert Size 2 16 mm1516-50-218 ATTUNE PS RP Insert Size 2 18 mm1516-50-305 ATTUNE PS RP Insert Size 3 5 mm1516-50-306 ATTUNE PS RP Insert Size 3 6 mm1516-50-307 ATTUNE PS RP Insert Size 3 7 mm1516-50-308 ATTUNE PS RP Insert Size 3 8 mm1516-50-310 ATTUNE PS RP Insert Size 3 10 mm1516-50-312 ATTUNE PS RP Insert Size 3 12 mm1516-50-314 ATTUNE PS RP Insert Size 3 14 mm1516-50-316 ATTUNE PS RP Insert Size 3 16 mm1516-50-318 ATTUNE PS RP Insert Size 3 18 mm1516-50-320 ATTUNE PS RP Insert Size 3 20 mm1516-50-405 ATTUNE PS RP Insert Size 4 5 mm1516-50-406 ATTUNE PS RP Insert Size 4 6 mm1516-50-407 ATTUNE PS RP Insert Size 4 7 mm1516-50-408 ATTUNE PS RP Insert Size 4 8 mm1516-50-410 ATTUNE PS RP Insert Size 4 10 mm1516-50-412 ATTUNE PS RP Insert Size 4 12 mm1516-50-414 ATTUNE PS RP Insert Size 4 14 mm1516-50-416 ATTUNE PS RP Insert Size 4 16 mm1516-50-418 ATTUNE PS RP Insert Size 4 18 mm1516-50-420 ATTUNE PS RP Insert Size 4 20 mm1516-50-505 ATTUNE PS RP Insert Size 5 5 mm1516-50-506 ATTUNE PS RP Insert Size 5 6 mm1516-50-507 ATTUNE PS RP Insert Size 5 7 mm1516-50-508 ATTUNE PS RP Insert Size 5 8 mm1516-50-510 ATTUNE PS RP Insert Size 5 10 mm1516-50-512 ATTUNE PS RP Insert Size 5 12 mm1516-50-514 ATTUNE PS RP Insert Size 5 14 mm1516-50-516 ATTUNE PS RP Insert Size 5 16 mm1516-50-518 ATTUNE PS RP Insert Size 5 18 mm1516-50-520 ATTUNE PS RP Insert Size 5 20 mm1516-50-605 ATTUNE PS RP Insert Size 6 5 mm1516-50-606 ATTUNE PS RP Insert Size 6 6 mm1516-50-607 ATTUNE PS RP Insert Size 6 7 mm1516-50-608 ATTUNE PS RP Insert Size 6 8 mm1516-50-610 ATTUNE PS RP Insert Size 6 10 mm1516-50-612 ATTUNE PS RP Insert Size 6 12 mm1516-50-614 ATTUNE PS RP Insert Size 6 14 mm1516-50-616 ATTUNE PS RP Insert Size 6 16 mm1516-50-618 ATTUNE PS RP Insert Size 6 18 mm1516-50-620 ATTUNE PS RP Insert Size 6 20 mm
Part Number Description1516-50-705 ATTUNE PS RP Insert Size 7 5 mm1516-50-706 ATTUNE PS RP Insert Size 7 6 mm1516-50-707 ATTUNE PS RP Insert Size 7 7 mm1516-50-708 ATTUNE PS RP Insert Size 7 8 mm1516-50-710 ATTUNE PS RP Insert Size 7 10 mm1516-50-712 ATTUNE PS RP Insert Size 7 12 mm1516-50-714 ATTUNE PS RP Insert Size 7 14 mm1516-50-716 ATTUNE PS RP Insert Size 7 16 mm1516-50-718 ATTUNE PS RP Insert Size 7 18 mm1516-50-720 ATTUNE PS RP Insert Size 7 20 mm1516-50-805 ATTUNE PS RP Insert Size 8 5 mm1516-50-806 ATTUNE PS RP Insert Size 8 6 mm1516-50-807 ATTUNE PS RP Insert Size 8 7 mm1516-50-808 ATTUNE PS RP Insert Size 8 8 mm1516-50-810 ATTUNE PS RP Insert Size 8 10 mm1516-50-812 ATTUNE PS RP Insert Size 8 12 mm1516-50-814 ATTUNE PS RP Insert Size 8 14 mm1516-50-816 ATTUNE PS RP Insert Size 8 16 mm1516-50-818 ATTUNE PS RP Insert Size 8 18 mm1516-50-820 ATTUNE PS RP Insert Size 8 20 mm1516-50-905 ATTUNE PS RP Insert Size 9 5 mm1516-50-906 ATTUNE PS RP Insert Size 9 6 mm1516-50-907 ATTUNE PS RP Insert Size 9 7 mm1516-50-908 ATTUNE PS RP Insert Size 9 8 mm1516-50-910 ATTUNE PS RP Insert Size 9 10 mm1516-50-912 ATTUNE PS RP Insert Size 9 12 mm1516-50-914 ATTUNE PS RP Insert Size 9 14 mm1516-50-916 ATTUNE PS RP Insert Size 9 16 mm1516-50-918 ATTUNE PS RP Insert Size 9 18 mm1516-50-920 ATTUNE PS RP Insert Size 9 20 mm1516-51-005 ATTUNE PS RP Insert Size 10 5 mm1516-51-006 ATTUNE PS RP Insert Size 10 6 mm1516-51-007 ATTUNE PS RP Insert Size 10 7 mm1516-51-008 ATTUNE PS RP Insert Size 10 8 mm1516-51-010 ATTUNE PS RP Insert Size 10 10 mm1516-51-012 ATTUNE PS RP Insert Size 10 12 mm1516-51-014 ATTUNE PS RP Insert Size 10 14 mm1516-51-016 ATTUNE PS RP Insert Size 10 16 mm1516-51-018 ATTUNE PS RP Insert Size 10 18 mm1516-51-020 ATTUNE PS RP Insert Size 10 20 mm
8 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
TIBIAL BASESFixed Bearing (FB) Cemented
Part Number Description1506-00-001 ATTUNE FB Cemented Tibial Base Size 11506-00-002 ATTUNE FB Cemented Tibial Base Size 21506-00-003 ATTUNE FB Cemented Tibial Base Size 31506-00-004 ATTUNE FB Cemented Tibial Base Size 41506-00-005 ATTUNE FB Cemented Tibial Base Size 51506-00-006 ATTUNE FB Cemented Tibial Base Size 61506-00-007 ATTUNE FB Cemented Tibial Base Size 71506-00-008 ATTUNE FB Cemented Tibial Base Size 81506-00-009 ATTUNE FB Cemented Tibial Base Size 91506-00-010 ATTUNE FB Cemented Tibial Base Size 10
Part Number Description1506-70-001 ATTUNE FB Cemented Tibial Base Size 11506-70-002 ATTUNE FB Cemented Tibial Base Size 21506-70-003 ATTUNE FB Cemented Tibial Base Size 31506-70-004 ATTUNE FB Cemented Tibial Base Size 41506-70-005 ATTUNE FB Cemented Tibial Base Size 51506-70-006 ATTUNE FB Cemented Tibial Base Size 61506-70-007 ATTUNE FB Cemented Tibial Base Size 71506-70-008 ATTUNE FB Cemented Tibial Base Size 81506-70-009 ATTUNE FB Cemented Tibial Base Size 91506-70-010 ATTUNE FB Cemented Tibial Base Size 10
Fixed Bearing (FB) CementedWith ATTUNE S+™ Technology
9 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
TIBIAL BASESRotating Platform (RP) Cemented
Part Number Description1506-10-001 ATTUNE RP Cemented Tibial Base Size 11506-10-002 ATTUNE RP Cemented Tibial Base Size 21506-10-003 ATTUNE RP Cemented Tibial Base Size 31506-10-004 ATTUNE RP Cemented Tibial Base Size 41506-10-005 ATTUNE RP Cemented Tibial Base Size 51506-10-006 ATTUNE RP Cemented Tibial Base Size 61506-10-007 ATTUNE RP Cemented Tibial Base Size 71506-10-008 ATTUNE RP Cemented Tibial Base Size 81506-10-009 ATTUNE RP Cemented Tibial Base Size 91506-10-010 ATTUNE RP Cemented Tibial Base Size 10
11 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
PATELLA COMPONENTSMedialized Dome Cemented
Medialized Dome Patella
Part Number Description1518-20-029 ATTUNE Medialized Dome Patella 29 mm1518-20-032 ATTUNE Medialized Dome Patella 32 mm1518-20-035 ATTUNE Medialized Dome Patella 35 mm1518-20-038 ATTUNE Medialized Dome Patella 38 mm1518-20-041 ATTUNE Medialized Dome Patella 41 mm
11 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
PATELLA COMPONENTSMedialized Anatomic Cemented
Medialized Anatomic Patella
Part Number Description1518-10-029 ATTUNE Medialized Anatomic Patella 29 mm1518-10-032 ATTUNE Medialized Anatomic Patella 32 mm1518-10-035 ATTUNE Medialized Anatomic Patella 35 mm1518-10-038 ATTUNE Medialized Anatomic Patella 38 mm1518-10-041 ATTUNE Medialized Anatomic Patella 41 mm
12 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION™ INSTRUMENTS – CASE 1 Primary Resections
Part Number Description2545-01-701 ATTUNE Primary Resections Case
2545-01-700 ATTUNE DePuy Synthes Lid
1 2544-00-001 ATTUNE Extra-Medullary Tibial Ankle Clamp
2 2544-00-018 ATTUNE Extra-Medullary Tibial Proximal Uprod
3 2544-00-003 ATTUNE Extra-Medullary Tibial Distal Uprod
4 2544-00-014 ATTUNE 0 Deg Left Cut Block
5 2544-00-015 ATTUNE 0 Deg Right Cut Block
6 2544-00-016 ATTUNE 0 Deg Symmetrical Cut Block
7 2544-00-007 ATTUNE Adjustable Tibial Stylus
8 2544-00-502 ATTUNE IM Rod
9 2544-00-520 ATTUNE Distal Femoral Jig
10 2544-00-522 ATTUNE Distal Femoral Cut Block
11 9505-02-079 HP 8 mm Step Drill
12 86-9188 P.F.C.™ SPEC1 Patellar Caliper
1
12
7
6 5 4
23
9
8
10
11
13 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION™ INSTRUMENTS – CASE 2 Tibial Prep and Impaction
21
4 1 15 13
161425
63
26 2517
27
11 12
9 10
87
18
19
23
19202422
Part Number Description2545-01-715 ATTUNE Tibia Prep & Impaction Case Gen 2
2545-01-700 ATTUNE DePuy Synthes Lid
1 2545-00-333 ATTUNE Pinned Tibial Base Trial Size 3
2 2545-00-334 ATTUNE Pinned Tibial Base Trial Size 4
3 2545-00-335 ATTUNE Pinned Tibial Base Trial Size 5
4 2545-00-336 ATTUNE Pinned Tibial Base Trial Size 6
5 2545-00-337 ATTUNE Pinned Tibial Base Trial Size 7
6 2545-00-338 ATTUNE Pinned Tibial Base Trial Size 8
7 2545-00-131 ATTUNE Tibial Drill Tower
8 2545-00-125 ATTUNE Tibial Drill*
9 2545-00-163 ATTUNE Tibial Drill Stop Size 3-5
10 2545-00-166 ATTUNE Tibial Drill Stop Size 6-8
11 2545-00-173 ATTUNE Keel Punch Size 3-5*
12 2545-00-176 ATTUNE Keel Punch Size 6-8*
13 2545-00-126 ATTUNE Evaluation Bullet Spiked Size 1-10
14 2545-00-341 ATTUNE FB Floating Evaluation Bullet Size 1-10
Part Number Description15 2545-00-342 ATTUNE FB Preparation Evaluation Bullet Size 1-10
16 2545-00-343 ATTUNE RP Preparation Evaluation Bullet Size 1-10
17 2545-00-119 ATTUNE Base Pins
18 2544-01-011 ATTUNE Alignment Handle
19 2544-01-017 ATTUNE Impaction Handle
20 2544-01-003 ATTUNE FB Tibial Impactor
21 2544-01-005 ATTUNE Femoral Introducer
22 2544-01-006 ATTUNE Femoral Impactor
23 2544-01-009 ATTUNE FB Insert Impactor
24 2544-01-004 ATTUNE RP Tibial Impactor
25 2545-00-344 ATTUNE Posterior Pin
26 2545-00-345 ATTUNE Anterior Pin
27 2545-00-346 ATTUNE Low-Profile Tib Pin Puller
*Please see Optional Instrument on page 31 for the Line to Line Keel Punch.
14 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION™ INSTRUMENTS – CASE 3 Femoral Sizing and Finishing
Part Number Description2545-01-703 ATTUNE Femoral Sizing & Finishing Case
2545-01-700 ATTUNE DePuy Synthes Lid
1 2544-00-525 ATTUNE Measured Sizing and Rotation Guide
2 2544-00-510 ATTUNE Balanced Sizer IM Rod
3 2544-00-512 ATTUNE Balanced IM Rod Handle
4 2544-00-523 ATTUNE Balanced Sizer CR Foot
5 2544-00-524 ATTUNE Balanced Sizer PS Foot
6 2544-00-517 ATTUNE Balanced Femoral Sizer
7 2544-00-519 ATTUNE Balanced Sizer Distractor
8 2545-00-153 ATTUNE A/P Chamfer Block Size 3
9 2545-00-154 ATTUNE A/P Chamfer Block Size 4
10 2545-00-155 ATTUNE A/P Chamfer Block Size 5
11 2545-00-156 ATTUNE A/P Chamfer Block Size 6
12 2545-00-157 ATTUNE A/P Chamfer Block Size 7
Part Number Description13 2545-00-158 ATTUNE A/P Chamfer Block Size 8
14 2545-00-045 ATTUNE Saw Capture Size 3-5
15 2545-00-046 ATTUNE Saw Capture Size 6-8
16 2545-00-146 ATTUNE Angel Wing
17 2545-00-048 ATTUNE Rasp
18 2544-00-023 ATTUNE Fem Finish Guide Size 3
19 2544-00-024 ATTUNE Fem Finish Guide Size 4
20 2544-00-025 ATTUNE Fem Finish Guide Size 5
21 2544-00-026 ATTUNE Fem Finish Guide Size 6
22 2544-00-027 ATTUNE Fem Finish Guide Size 7
23 2544-00-028 ATTUNE Fem Finish Guide Size 8
24 2545-00-049 ATTUNE Patella/Femoral Size 3-10 Lug Drill
25 2544-00-511 ATTUNE Balanced Sizer Interpreter
21
4
1
1
15
1316
14
2 56
3
25
17
11 12
9 108
7 7
18
23
19 20
24
22
15 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION™ INSTRUMENTS – CASE 4Shims and General Instruments
2131
4 1
15 1316 14
256 3
26
36
25
35
17
27
37
1112
910 8 7
18
28
38
23
33
19
29
3920
30 24
34
22
32
Part Number Description2545-01-704 ATTUNE Shims & General Instruments Case
2545-01-700 ATTUNE DePuy Synthes Lid
1 2545-00-631 ATTUNE Shim Size 3/4 5 mm
2 2545-00-632 ATTUNE Shim Size 3/4 6 mm
3 2545-00-742 ATTUNE Shim Size 3/4 7 mm
4 2545-00-633 ATTUNE Shim Size 3/4 8 mm
5 2545-00-916 ATTUNE Shim Size 3/4 10 mm
6 2545-00-917 ATTUNE Shim Size 3/4 12 mm
7 2545-00-918 ATTUNE Shim Size 3/4 14 mm
8 2545-00-919 ATTUNE Shim Size 3/4 16 mm
9 2545-00-920 ATTUNE Shim Size 3/4 18 mm
10 2545-00-921 ATTUNE Shim Size 3/4 20 mm
11 2545-00-651 ATTUNE Shim Size 5/6 5 mm
12 2545-00-652 ATTUNE Shim Size 5/6 6 mm
13 2545-00-743 ATTUNE Shim Size 5/6 7 mm
14 2545-00-653 ATTUNE Shim Size 5/6 8 mm
15 2545-00-928 ATTUNE Shim Size 5/6 10 mm
16 2545-00-929 ATTUNE Shim Size 5/6 12 mm
17 2545-00-930 ATTUNE Shim Size 5/6 14 mm
18 2545-00-931 ATTUNE Shim Size 5/6 16 mm
19 2545-00-932 ATTUNE Shim Size 5/6 18 mm
Part Number Description20 2545-00-933 ATTUNE Shim Size 5/6 20 mm
21 2545-00-671 ATTUNE Shim Size 7/8 5 mm
22 2545-00-672 ATTUNE Shim Size 7/8 6 mm
23 2545-00-744 ATTUNE Shim Size 7/8 7 mm
24 2545-00-673 ATTUNE Shim Size 7/8 8 mm
25 2545-00-940 ATTUNE Shim Size 7/8 10 mm
26 2545-00-941 ATTUNE Shim Size 7/8 12 mm
27 2545-00-942 ATTUNE Shim Size 7/8 14 mm
28 2545-00-943 ATTUNE Shim Size 7/8 16 mm
29 2545-00-944 ATTUNE Shim Size 7/8 18 mm
30 2545-00-945 ATTUNE Shim Size 7/8 20 mm
31 2544-01-014 ATTUNE Spacer Block
32 2544-01-015 ATTUNE Spacer Base
33 2544-01-016 ATTUNE CR Flexion Base
34 2545-00-591 ATTUNE RP Trial Post
35 2545-00-060 ATTUNE Pin Puller
36 9505-01-207 HP Alignment Rod
37 9505-02-071 HP Power Pin Driver
38 2545-00-065 ATTUNE Pin Impactor
39 2545-00-138 ATTUNE Tibial Trial Extractor
16 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION™ INSTRUMENTS – CASE 5 PS Notch Guides & Trials SZ 3-5
4 1
15
13
1425
6 3
11
129
10
8
7
Part Number Description2545-01-705 ATTUNE PS Notch Guides & Trials Size 3-5 Case
2545-01-700 ATTUNE DePuy Synthes Lid
1 2545-00-723 ATTUNE PS Femoral Trial Size 3 Right*
2 2545-00-724 ATTUNE PS Femoral Trial Size 4 Right*
3 2545-00-725 ATTUNE PS Femoral Trial Size 5 Right*
4 2545-00-733 ATTUNE PS Femoral Trial Size 3 Left*
5 2545-00-734 ATTUNE PS Femoral Trial Size 4 Left*
6 2545-00-735 ATTUNE PS Femoral Trial Size 5 Left*
7 2545-00-023 ATTUNE Notch Guide Size 3
8 2545-00-024 ATTUNE Notch Guide Size 4
9 2545-00-025 ATTUNE Notch Guide Size 5
10 2545-00-503 ATTUNE FB PS Articulation Surface Size 3
11 2545-00-504 ATTUNE FB PS Articulation Surface Size 4
12 2545-00-505 ATTUNE FB PS Articulation Surface Size 5
13 2545-00-543 ATTUNE RP PS Articulation Surface Size 3
14 2545-00-544 ATTUNE RP PS Articulation Surface Size 4
15 2545-00-545 ATTUNE RP PS Articulation Surface Size 5
*Please see Optional Instrument on page 32 for the Metal Femoral Trials.
17 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION™ INSTRUMENTS – CASE 6 PS Notch Guides & Trials SZ 6-8
4 1
15
13
1425
6 3
11
129
10
8
7
Part Number Description2545-01-706 ATTUNE PS Notch Guides & Trials Size 6-8 Case
2545-01-700 ATTUNE DePuy Synthes Lid
1 2545-00-726 ATTUNE PS Femoral Trial Size 6 Right*
2 2545-00-727 ATTUNE PS Femoral Trial Size 7 Right*
3 2545-00-728 ATTUNE PS Femoral Trial Size 8 Right*
4 2545-00-736 ATTUNE PS Femoral Trial Size 6 Left*
5 2545-00-737 ATTUNE PS Femoral Trial Size 7 Left*
6 2545-00-738 ATTUNE PS Femoral Trial Size 8 Left*
7 2545-00-026 ATTUNE Notch Guide Size 6
8 2545-00-027 ATTUNE Notch Guide Size 7
9 2545-00-028 ATTUNE Notch Guide Size 8
10 2545-00-506 ATTUNE FB PS Articulation Surface Size 6
11 2545-00-507 ATTUNE FB PS Articulation Surface Size 7
12 2545-00-508 ATTUNE FB PS Articulation Surface Size 8
13 2545-00-546 ATTUNE RP PS Articulation Surface Size 6
14 2545-00-547 ATTUNE RP PS Articulation Surface Size 7
15 2545-00-548 ATTUNE RP PS Articulation Surface Size 8
*Please see Optional Instrument on page 32 for the Metal Femoral Trials.
18 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION™ INSTRUMENTS – CASE 7 CR Trials SZ 3-8
21 4
1
15
13
16
14 2
56
3
171112
910
8 7
1823
1920
24
22
Part Number Description2545-01-707 ATTUNE CR Trials Size 3-8 Case
2545-01-700 ATTUNE DePuy Synthes Lid
1 2545-00-703 ATTUNE CR Femoral Trial Size 3 Right*
2 2545-00-704 ATTUNE CR Femoral Trial Size 4 Right*
3 2545-00-705 ATTUNE CR Femoral Trial Size 5 Right*
4 2545-00-706 ATTUNE CR Femoral Trial Size 6 Right*
5 2545-00-707 ATTUNE CR Femoral Trial Size 7 Right*
6 2545-00-708 ATTUNE CR Femoral Trial Size 8 Right*
7 2545-00-713 ATTUNE CR Femoral Trial Size 3 Left*
8 2545-00-714 ATTUNE CR Femoral Trial Size 4 Left*
9 2545-00-715 ATTUNE CR Femoral Trial Size 5 Left*
10 2545-00-716 ATTUNE CR Femoral Trial Size 6 Left*
11 2545-00-717 ATTUNE CR Femoral Trial Size 7 Left*
Part Number Description12 2545-00-718 ATTUNE CR Femoral Trial Size 8 Left*
13 2545-00-523 ATTUNE FB CR Articulation Surface Size 3
14 2545-00-524 ATTUNE FB CR Articulation Surface Size 4
15 2545-00-525 ATTUNE FB CR Articulation Surface Size 5
16 2545-00-526 ATTUNE FB CR Articulation Surface Size 6
17 2545-00-527 ATTUNE FB CR Articulation Surface Size 7
18 2545-00-528 ATTUNE FB CR Articulation Surface Size 8
19 2545-00-563 ATTUNE RP CR Articulation Surface Size 3
20 2545-00-564 ATTUNE RP CR Articulation Surface Size 4
21 2545-00-565 ATTUNE RP CR Articulation Surface Size 5
22 2545-00-566 ATTUNE RP CR Articulation Surface Size 6
23 2545-00-567 ATTUNE RP CR Articulation Surface Size 7
24 2545-00-568 ATTUNE RP CR Articulation Surface Size 8
*Please see Optional Instrument on page 32 for the Metal Femoral Trials.
19 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION™ INSTRUMENTS – CASE 8 Patella Preparation
23
4
1
1715 1816
2
5 6 7
8
3
2827
19
291314
11 12109
2025 2421 2226
Part Number Description2545-01-714 ATTUNE Patella Prep Case Gen 2.1
2545-01-700 ATTUNE DePuy Synthes Lid
1 2545-01-040 ATTUNE Patella Resection Guide
2 2545-01-054 ATTUNE Patella Resect Guide Shim
3 2545-01-056 ATTUNE Patella Trial Handle
4 2545-01-055 ATTUNE Patella Drill Clamp
5 2545-05-550 ATTUNE Medialized Anatomic Patella Button
6 2545-05-551 ATTUNE Medialized Dome Patella Button
7 2545-05-552 ATTUNE Patella Button Holder
8 2545-01-048 ATTUNE Medialized Dome Patella Drill Trial 29 mm
9 2545-01-049 ATTUNE Medialized Dome Patella Drill Trial 32 mm
10 2545-01-050 ATTUNE Medialized Dome Patella Drill Trial 35 mm
11 2545-01-051 ATTUNE Medialized Dome Patella Drill Trial 38 mm
12 2545-01-052 ATTUNE Medialized Dome Patella Drill Trial 41 mm
13 2545-01-023 ATTUNE Patella Wafer Small
14 2545-01-024 ATTUNE Patella Wafer Large
Part Number Description15 2545-01-025 ATTUNE Medialized Dome Patella Trial 29 mm
16 2545-01-026 ATTUNE Medialized Dome Patella Trial 32 mm
17 2545-01-027 ATTUNE Medialized Dome Patella Trial 35 mm
18 2545-01-028 ATTUNE Medialized Dome Patella Trial 38 mm
19 2545-01-029 ATTUNE Medialized Dome Patella Trial 41 mm
20 2545-01-043 ATTUNE Medialized Anatomic Patella Drill Trial 29 mm
21 2545-01-044 ATTUNE Medialized Anatomic Patella Drill Trial 32 mm
22 2545-01-045 ATTUNE Medialized Anatomic Patella Drill Trial 35 mm
23 2545-01-046 ATTUNE Medialized Anatomic Patella Drill Trial 38 mm
24 2545-01-047 ATTUNE Medialized Anatomic Patella Drill Trial 41 mm
25 2545-01-035 ATTUNE Medialized Anatomic Patella Trial 29 mm
26 2545-01-036 ATTUNE Medialized Anatomic Patella Trial 32 mm
27 2545-01-037 ATTUNE Medialized Anatomic Patella Trial 35 mm
28 2545-01-038 ATTUNE Medialized Anatomic Patella Trial 38 mm
29 2545-01-039 ATTUNE Medialized Anatomic Patella Trial 41 mm
21 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION™ INSTRUMENTS – CASE 9 Macro SZ 9-10
21
4
1
1513
1614
2
56 3
1711
12
9
10
87
18
19
20
Part Number Description2545-01-709 ATTUNE Instruments Size 9-10
2545-01-700 ATTUNE DePuy Synthes Lid
1 2545-00-169 ATTUNE Tibial Drill Stop Size 9-10
2 2545-00-179 ATTUNE Keel Punch Size 9-10*
3 2545-00-159 ATTUNE A/P Chamfer Block Size 9
4 2545-00-160 ATTUNE A/P Chamfer Block Size 10
5 2545-00-047 ATTUNE Saw Capture Size 9-10
6 2545-00-029 ATTUNE Notch Guide Size 9
7 2545-00-030 ATTUNE Notch Guide Size 10
8 2544-00-029 ATTUNE Fem Finish Guide Size 9
9 2544-00-030 ATTUNE Fem Finish Guide Size 10
10 2545-00-691 ATTUNE Shim Size 9/10 5 mm
11 2545-00-692 ATTUNE Shim Size 9/10 6 mm
12 2545-00-745 ATTUNE Shim Size 9/10 7 mm
13 2545-00-693 ATTUNE Shim Size 9/10 8 mm
14 2545-00-694 ATTUNE Shim Size 9/10 10 mm
15 2545-00-695 ATTUNE Shim Size 9/10 12 mm
16 2545-00-696 ATTUNE Shim Size 9/10 14 mm
17 2545-00-697 ATTUNE Shim Size 9/10 16 mm
18 2545-00-698 ATTUNE Shim Size 9/10 18 mm
19 2545-00-699 ATTUNE Shim Size 9/10 20 mm
20 2545-00-339 ATTUNE Pinned Tibial Base Trial Size 9
21 2545-00-340 ATTUNE Pinned Tibial Base Trial Size 10
*Please see Optional Instrument on page 31 for the Line to Line Keel Punch
21 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION™ INSTRUMENTS – CASE 10 Macro Trials SZ 9-10
4
1
15
13
1316
14
14
2 5 6
3
11 12
9
9
10
10
87
Part Number Description2545-01-710 ATTUNE PS & CR Trials Size 9-10
2545-01-700 ATTUNE DePuy Synthes Lid
1 2545-00-709 ATTUNE CR Femoral Trial Size 9 Right*
2 2545-00-710 ATTUNE CR Femoral Trial Size 10 Right*
3 2545-00-719 ATTUNE CR Femoral Trial Size 9 Left*
4 2545-00-720 ATTUNE CR Femoral Trial Size 10 Left*
5 2545-00-729 ATTUNE PS Femoral Trial Size 9 Right*
6 2545-00-730 ATTUNE PS Femoral Trial Size 10 Right*
7 2545-00-739 ATTUNE PS Femoral Trial Size 9 Left*
8 2545-00-740 ATTUNE PS Femoral Trial Size 10 Left*
9 2545-00-979 ATTUNE FB PS Articulation Surface Size 9
10 2545-00-980 ATTUNE FB PS Articulation Surface Size 10
11 2545-01-969 ATTUNE FB CR Articulation Surface Size 9
12 2545-01-970 ATTUNE FB CR Articulation Surface Size 10
13 2545-00-999 ATTUNE RP PS Articulation Surface Size 9
14 2545-01-000 ATTUNE RP PS Articulation Surface Size 10
15 2545-01-989 ATTUNE RP CR Articulation Surface Size 9
16 2545-01-990 ATTUNE RP CR Articulation Surface Size 10
*Please see Optional Instrument on page 32 for the Metal Femoral Trials.
22 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION™ INSTRUMENTS – CASE 11 Micro Instruments SZ 1-2 & Trials SZ 2
21
4 4
1 1
1513 1614
22
56
3 326
25
1712 9 910 8 7
1823
19
2024 22
Part Number Description
2545-01-711ATTUNE INTUITION Instruments Size 1-2 & Trials Size 2
2545-01-700 ATTUNE DePuy Synthes Lid
1 2545-00-972 ATTUNE FB PS Articulation Surface Size 2
2 2545-00-962 ATTUNE FB CR Articulation Surface Size 2
3 2545-00-992 ATTUNE RP PS Articulation Surface Size 2
4 2545-00-982 ATTUNE RP CR Articulation Surface Size 2
5 2545-11-005 ATTUNE Shim Size 1/2 5 mm
6 2545-11-006 ATTUNE Shim Size 1/2 6 mm
7 2545-11-007 ATTUNE Shim Size 1/2 7 mm
8 2545-11-008 ATTUNE Shim Size 1/2 8 mm
9 2545-11-010 ATTUNE Shim Size 1/2 10 mm
10 2545-11-012 ATTUNE Shim Size 1/2 12 mm
11 2545-11-014 ATTUNE Shim Size 1/2 14 mm
12 2545-11-016 ATTUNE Shim Size 1/2 16 mm
Part Number Description13 2545-11-018 ATTUNE Shim Size 1/2 18 mm
14 2545-00-101 ATTUNE Tibial Base Trial Size 1
15 2545-00-102 ATTUNE Tibial Base Trial Size 2
16 2545-00-161 ATTUNE Tibial Drill Stop Size 1-2
17 2545-00-171 ATTUNE Keel Punch Size 1-2*
18 2545-00-152 ATTUNE A/P Chamfer Block Size 2
19 2545-00-044 ATTUNE Saw Capture Size 1-2
20 2545-00-022 ATTUNE Notch Guide Size 2
21 2545-00-041 ATTUNE Femur Drill Size 1-2
22 2544-00-022 ATTUNE Fem Finish Guide Size 2
23 2545-00-702 ATTUNE PS Femoral Trial Size 2 Right
24 2545-00-712 ATTUNE PS Femoral Trial Size 2 Left
25 2545-00-722 ATTUNE CR Femoral Trial Size 2 Right
26 2545-00-732 ATTUNE CR Femoral Trial Size 2 Left
*Please see Optional Instrument on page 31 for the Line to Line Keel Punch
23 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION™ INSTRUMENTS – CASE 12 Micro Femoral Finishing & Trials SZ 1
4 41 1 2 2
5
6
3 3
119
1087
Part Number Description
2545-01-712ATTUNE INTUITION MICRO Instruments Size 1-2 & Trials Size 2
2004-20-933 ATTUNE TRUMATCH Half Lid
1 2545-00-971 ATTUNE FB PS Articulation Surface Size 1
2 2545-00-961 ATTUNE FB CR Articulation Surface Size 1
3 2545-00-991 ATTUNE RP PS Articulation Surface Size 1
4 2545-00-981 ATTUNE RP CR Articulation Surface Size 1
5 2545-00-151 ATTUNE A/P Chamfer Block Size 1
6 2545-00-021 ATTUNE Notch Guide Size 1
7 2544-00-021 ATTUNE Fem Finish Guide Size 1
8 2545-00-701 ATTUNE CR Femoral Trial Size 1 Right
9 2545-00-711 ATTUNE CR Femoral Trial Size 1 Left
10 2545-00-721 ATTUNE PS Femoral Trial Size 1 Right
11 2545-00-731 ATTUNE PS Femoral Trial Size 1 Left
24 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION™ INSTRUMENTS – CASE 13 Minimal Invasive Surgery Instruments
4
1
2
5
6
3
9
8
7
Part Number Description2545-01-713 ATTUNE INTUITION MIS Instruments
2004-20-933 ATTUNE TRUMATCH Half Lid
1 2545-01-800 ATTUNE MI Sizer Stylus
2 2545-01-801 ATTUNE MI Distal Block
3 2545-01-802 ATTUNE MI Tibial Drill Tower
4 2545-01-803 ATTUNE MI Spacer Block
5 2545-01-804 ATTUNE MI Spacer Base
6 2545-01-805 ATTUNE MI CR Flexion Base
7 9505-01-174 SIGMA® HP 0 Deg Left MI Cut Block
8 9505-01-175 SIGMA HP 0 Deg Right MI Cut Block
9 9505-01-190 SIGMA HP MI Reference Guide
25 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION SOLO™ INSTRUMENTS Sizing Only
Part Number Description2544-00-200 ATTUNE SOLO Sizing Only
1 Measured Sizer Stylus
2 Measured Sizing & Rotation Guide
3 3 Degree Foot
4 0 & 5 Degree Foot
5 Tibial Sizing Guide
4
1
2 5
3
26 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION SOLO™ INSTRUMENTS Tibial Prep FB/RP SZ 3-5 and SZ 6-8
Part Number Description2544-00-101 ATTUNE SOLO Tibial Preparation FB/RP Size 3-5
2544-00-102 ATTUNE SOLO Tibial Preparation FB/RP Size 6-8
1 Impactor
2 Keel Punch Impaction Handle
3 Tibial Drill
4 Keel Punch
5 Evaluation Bullet
6 Tibial Drill Tower
7 Tibial Base Trials
41
2 5
63 7
27 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION SOLO™ INSTRUMENTS Femoral Finishing PS
4
1 2
5 6
3
39
87
Part Number Description2544-00-113 ATTUNE SOLO Femoral Finishing PS Size 3
2544-00-114 ATTUNE SOLO Femoral Finishing PS Size 4
2544-00-115 ATTUNE SOLO Femoral Finishing PS Size 5
2544-00-116 ATTUNE SOLO Femoral Finishing PS Size 6
2544-00-117 ATTUNE SOLO Femoral Finishing PS Size 7
2544-00-118 ATTUNE SOLO Femoral Finishing PS Size 8
1 RP Tibial Trials
2 FB Tibial Trials
3 Femoral Trials
4 Chamfer Cutting Guide
5 A/P Cut Block
6 Shims (5, 6, 7, 8, 10, and 12 mm)
7 Femoral Lug Drill
8 Spacer Block
9 Notch Guide
28 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION SOLO™ INSTRUMENTS Femoral Finishing CR
4
1 2
5 6
3
3
87
Part Number Description2544-00-103 ATTUNE SOLO Femoral Finishing CR Size 3
2544-00-104 ATTUNE SOLO Femoral Finishing CR Size 4
2544-00-105 ATTUNE SOLO Femoral Finishing CR Size 5
2544-00-106 ATTUNE SOLO Femoral Finishing CR Size 6
2544-00-107 ATTUNE SOLO Femoral Finishing CR Size 7
2544-00-108 ATTUNE SOLO Femoral Finishing CR Size 8
1 RP Tibial Trials
2 FB Tibial Trials
3 Femoral Trials
4 Chamfer Cutting Guide
5 A/P Cut Block
6 Shims (5, 6, 7, 8, 10, and 12 mm)
7 Femoral Lug Drill
8 Spacer Block
29 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION SOLO™ INSTRUMENTSPatella Sizing and Preparation
4
1
2
5 6
3
7
Part Number Description2544-00-110 ATTUNE SOLO Patella Sizing and Preparation
1 Patella Drill Guide
2 Patella Trial Size 29
3 Patella Trial Size 32
4 Patella Trial Size 35
5 Patella Trial Size 38
6 Patella Trial Size 41
7 Cement Clamp Button
31 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
INTUITION SOLO™ INSTRUMENTS Threaded Headed Pinning System
Part Number Description2544-00-120 ATTUNE SOLO Threaded Headed Pinning System
(4 Universal and 2 Threaded Headed Pins and a Pin Driver)
Part Number Description2544-00-121 ATTUNE SOLO Threaded Pinning System
(4 Threaded and 2 Threaded Headed Pins and a Pin Driver)
31 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
OPTIONAL INSTRUMENTATION
X-Ray Templates
Pin Pack
Femoral Templates
Cemented Line to Line Instruments
Femoral Trial Gripper
Implant DNIs
TRUMATCH® Personalized Solutions
Part Number Description2543-00-000 ATTUNE CR Femoral X-Ray Template2543-00-001 ATTUNE PS Femoral X-Ray Template2543-00-002 ATTUNE Tibial Base X-Ray Template
Part Number Description2518-80-220 ATTUNE CR Cemented Femoral Size 5 Left DNI2518-80-221 ATTUNE CR Cemented Femoral Size 5N Left DNI2518-80-222 ATTUNE PS Cemented Femoral Size 5 Left DNI2518-80-223 ATTUNE PS Cemented Femoral Size 5N Left DNI2518-80-224 ATTUNE FB Cemented Tibial Base Size 5 DNI2518-80-225 ATTUNE RP Cemented Tibial Base Size 5 DNI2518-80-331 ATTUNE CR FB Insert Size 5 6 mm DNI2518-80-332 ATTUNE CR RP Insert Size 5 6 mm DNI2518-80-333 ATTUNE PS FB Insert Size 5 6 mm DNI2518-80-334 ATTUNE PS RP Insert Size 5 6 mm DNI2518-80-336 ATTUNE Medialized Dome Patella 35 mm DNI2518-80-337 ATTUNE Medialized Anatomic Patella 35 mm DNI
Part Number Description2004-20-930 TRUMATCH Primary Resection Instrument Tray2004-20-931 TRUMATCH Preparation Trial Instrument Tray2004-20-933 TRUMATCH Trial Tray Lid2004-20-943 TRUMATCH Femoral Trial Tray Size 32004-20-944 TRUMATCH Femoral Trial Tray Size 42004-20-945 TRUMATCH Femoral Trial Tray Size 52004-20-946 TRUMATCH Femoral Trial Tray Size 62004-20-947 TRUMATCH Femoral Trial Tray Size 72004-20-948 TRUMATCH Femoral Trial Tray Size 82004-20-953 TRUMATCH Tibial Trial Tray Size 32004-20-954 TRUMATCH Tibial Trial Tray Size 42004-20-955 TRUMATCH Tibial Trial Tray Size 52004-20-956 TRUMATCH Tibial Trial Tray Size 62004-20-957 TRUMATCH Tibial Trial Tray Size 72004-20-958 TRUMATCH Tibial Trial Tray Size 82545-01-700 ATTUNE DePuy Synthes Lid
Part Number Description
2544-00-111ATTUNE Pin Pack (4 Universal and 2 Threaded Headed Pins)
Part Number Description2545-00-781 ATTUNE Femoral Template Sizes 1 and 22545-00-782 ATTUNE Femoral Template Sizes 3 and 42545-00-783 ATTUNE Femoral Template Sizes 5 and 62545-00-784 ATTUNE Femoral Template Sizes 7 and 82545-00-785 ATTUNE Femoral Template Sizes 9 and 10
Part Number Description2545-00-351 ATTUNE Line to Line Cemented Keel Punch Size 1-2 2545-00-353 ATTUNE Line to Line Cemented Keel Punch Size 3-5 2545-00-356 ATTUNE Line to Line Cemented Keel Punch Size 6-8 2545-00-359 ATTUNE Line to Line Cemented Keel Punch Size 9-10 2545-00-165 ATTUNE Line to Line Cemented Tibial Drill
Part Number Description2545-00-366 ATTUNE Femoral Trial Gripper
The Line to Line optional instruments can be incorporated in the Tibia Prep & Impaction Case Gen 2 (part number 2545-01-715)
32 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
OPTIONAL INSTRUMENTATION
Metal Femoral Trials
Part Number Description2545-02-003 ATTUNE CR METAL FEMORAL TRIAL SIZE 3 LEFT2545-02-004 ATTUNE CR METAL FEMORAL TRIAL SIZE 4 LEFT2545-02-005 ATTUNE CR METAL FEMORAL TRIAL SIZE 5 LEFT2545-02-006 ATTUNE CR METAL FEMORAL TRIAL SIZE 6 LEFT2545-02-007 ATTUNE CR METAL FEMORAL TRIAL SIZE 7 LEFT2545-02-008 ATTUNE CR METAL FEMORAL TRIAL SIZE 8 LEFT2545-02-009 ATTUNE CR METAL FEMORAL TRIAL SIZE 9 LEFT2545-02-010 ATTUNE CR METAL FEMORAL TRIAL SIZE 10 LEFT2545-02-013 ATTUNE CR METAL FEMORAL TRIAL SIZE 3 RIGHT2545-02-014 ATTUNE CR METAL FEMORAL TRIAL SIZE 4 RIGHT2545-02-015 ATTUNE CR METAL FEMORAL TRIAL SIZE 5 RIGHT2545-02-016 ATTUNE CR METAL FEMORAL TRIAL SIZE 6 RIGHT2545-02-017 ATTUNE CR METAL FEMORAL TRIAL SIZE 7 RIGHT2545-02-018 ATTUNE CR METAL FEMORAL TRIAL SIZE 8 RIGHT2545-02-019 ATTUNE CR METAL FEMORAL TRIAL SIZE 9 RIGHT2545-02-020 ATTUNE CR METAL FEMORAL TRIAL SIZE 10 RIGHT2545-02-023 ATTUNE PS METAL FEMORAL TRIAL SIZE 3 LEFT2545-02-024 ATTUNE PS METAL FEMORAL TRIAL SIZE 4 LEFT2545-02-025 ATTUNE PS METAL FEMORAL TRIAL SIZE 5 LEFT2545-02-026 ATTUNE PS METAL FEMORAL TRIAL SIZE 6 LEFT2545-02-027 ATTUNE PS METAL FEMORAL TRIAL SIZE 7 LEFT2545-02-028 ATTUNE PS METAL FEMORAL TRIAL SIZE 8LEFT2545-02-029 ATTUNE PS METAL FEMORAL TRIAL SIZE 9 LEFT2545-02-030 ATTUNE PS METAL FEMORAL TRIAL SIZE 10 LEFT2545-02-033 ATTUNE PS METAL FEMORAL TRIAL SIZE 3 RIGHT2545-02-034 ATTUNE PS METAL FEMORAL TRIAL SIZE 4 RIGHT2545-02-035 ATTUNE PS METAL FEMORAL TRIAL SIZE 5 RIGHT2545-02-036 ATTUNE PS METAL FEMORAL TRIAL SIZE 6 RIGHT2545-02-037 ATTUNE PS METAL FEMORAL TRIAL SIZE 7 RIGHT2545-02-038 ATTUNE PS METAL FEMORAL TRIAL SIZE 8 RIGHT2545-02-039 ATTUNE PS METAL FEMORAL TRIAL SIZE 9 RIGHT2545-02-040 ATTUNE PS METAL FEMORAL TRIAL SIZE 10 RIGHT
The Metal Femoral Trial can be deployed in the original sets instead of the Composite Femoral Trials
33 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
OPTIONAL INSTRUMENTATIONTibial Prep and Impaction
Part Number Description2545-01-702 ATTUNE Tibia Prep & Impaction Case
2545-01-700 ATTUNE DePuy Synthes Lid
1 2545-00-103 ATTUNE Tibial Base Trial Size 3
2 2545-00-104 ATTUNE Tibial Base Trial Size 4
3 2545-00-105 ATTUNE Tibial Base Trial Size 5
4 2545-00-106 ATTUNE Tibial Base Trial Size 6
5 2545-00-107 ATTUNE Tibial Base Trial Size 7
6 2545-00-108 ATTUNE Tibial Base Trial Size 8
7 2545-00-131 ATTUNE Tibial Drill Tower
8 2545-00-125 ATTUNE Tibial Drill
9 2545-00-163 ATTUNE Tibial Drill Stop Size 3-5
10 2545-00-166 ATTUNE Tibial Drill Stop Size 6-8
Part Number Description11 2545-00-173 ATTUNE Keel Punch Size 3-5
12 2545-00-176 ATTUNE Keel Punch Size 6-8
13 2545-00-126 ATTUNE Evaluation Bullet Spiked Size 1-10
14 2545-00-127 ATTUNE Evaluation Bullet No Spike Size 1-10
15 2545-00-119 ATTUNE Base Pins
16 2544-01-011 ATTUNE Alignment Handle
17 2544-01-017 ATTUNE Impaction Handle
18 2544-01-003 ATTUNE FB Tibial Impactor
19 2544-01-005 ATTUNE Femoral Introducer
20 2544-01-006 ATTUNE Femoral Impactor
21 2544-01-009 ATTUNE FB Insert Impactor
22 2544-01-004 ATTUNE RP Tibial Impactor
21
4 1
15
13
16
14
256 3
17
17
1112
9108
7
18
19
20 22
34 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
OPTIONAL INSTRUMENTATIONTibial Insert Trials CR FB SZ 3-10, thicknesses 5 mm-12 mm
21
31 43
4
1
15
13
16
142
5
6
3
26
36 48
49
25
35 4717
27
37
11
12
9
10
8
7
18
28
38
23
33 45
19
29
3920
30
40
41
42
24
34 4622
32 44
Part Number Description
2545-05-424ATTUNE CR FB Insert Trial size 3-10, thicknesses 5 mm-12 mm
2545-01-700 ATTUNE DePuy Synthes Lid
1 2545-05-200 ATTUNE CR FB Insert Trial Size 3 5 mm
2 2545-05-201 ATTUNE CR FB Insert Trial Size 3 6 mm
3 2545-05-202 ATTUNE CR FB Insert Trial Size 3 7 mm
4 2545-05-203 ATTUNE CR FB Insert Trial Size 3 8 mm
5 2545-05-205 ATTUNE CR FB Insert Trial Size 3 10 mm
6 2545-05-206 ATTUNE CR FB Insert Trial Size 3 12 mm
7 2545-05-207 ATTUNE CR FB Insert Trial Size 4 5 mm
8 2545-05-208 ATTUNE CR FB Insert Trial Size 4 6 mm
9 2545-05-209 ATTUNE CR FB Insert Trial Size 4 7 mm
10 2545-05-210 ATTUNE CR FB Insert Trial Size 4 8 mm
11 2545-05-212 ATTUNE CR FB Insert Trial Size 4 10 mm
12 2545-05-213 ATTUNE CR FB Insert Trial Size 4 12 mm
13 2545-05-214 ATTUNE CR FB Insert Trial Size 5 5 mm
14 2545-05-215 ATTUNE CR FB Insert Trial Size 5 6 mm
15 2545-05-216 ATTUNE CR FB Insert Trial Size 5 7 mm
16 2545-05-217 ATTUNE CR FB Insert Trial Size 5 8 mm
17 2545-05-219 ATTUNE CR FB Insert Trial Size 5 10 mm
18 2545-05-220 ATTUNE CR FB Insert Trial Size 5 12 mm
19 2545-05-221 ATTUNE CR FB Insert Trial Size 6 5 mm
20 2545-05-222 ATTUNE CR FB Insert Trial Size 6 6 mm
21 2545-05-223 ATTUNE CR FB Insert Trial Size 6 7 mm
22 2545-05-224 ATTUNE CR FB Insert Trial Size 6 8 mm
23 2545-05-226 ATTUNE CR FB Insert Trial Size 6 10 mm
Part Number Description24 2545-05-227 ATTUNE CR FB Insert Trial Size 6 12 mm
25 2545-05-228 ATTUNE CR FB Insert Trial Size 7 5 mm
26 2545-05-229 ATTUNE CR FB Insert Trial Size 7 6 mm
27 2545-05-230 ATTUNE CR FB Insert Trial Size 7 7 mm
28 2545-05-231 ATTUNE CR FB Insert Trial Size 7 8 mm
29 2545-05-233 ATTUNE CR FB Insert Trial Size 7 10 mm
30 2545-05-234 ATTUNE CR FB Insert Trial Size 7 12 mm
31 2545-05-235 ATTUNE CR FB Insert Trial Size 8 5 mm
32 2545-05-236 ATTUNE CR FB Insert Trial Size 8 6 mm
33 2545-05-237 ATTUNE CR FB Insert Trial Size 8 7 mm
34 2545-05-238 ATTUNE CR FB Insert Trial Size 8 8 mm
35 2545-05-240 ATTUNE CR FB Insert Trial Size 8 10 mm
36 2545-05-241 ATTUNE CR FB Insert Trial Size 8 12 mm
37 2545-05-242 ATTUNE CR FB Insert Trial Size 9 5 mm
38 2545-05-243 ATTUNE CR FB Insert Trial Size 9 6 mm
39 2545-05-244 ATTUNE CR FB Insert Trial Size 9 7 mm
40 2545-05-245 ATTUNE CR FB Insert Trial Size 9 8 mm
41 2545-05-247 ATTUNE CR FB Insert Trial Size 9 10 mm
42 2545-05-248 ATTUNE CR FB Insert Trial Size 9 12 mm
43 2545-05-249 ATTUNE CR FB Insert Trial Size 10 5 mm
44 2545-05-250 ATTUNE CR FB Insert Trial Size 10 6 mm
45 2545-05-251 ATTUNE CR FB Insert Trial Size 10 7 mm
46 2545-05-252 ATTUNE CR FB Insert Trial Size 10 8 mm
47 2545-05-254 ATTUNE CR FB Insert Trial Size 10 10 mm
48 2545-05-255 ATTUNE CR FB Insert Trial Size 10 12 mm
49 2545-05-436 ATTUNE Insert Trial Handle
35 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
OPTIONAL INSTRUMENTATIONTibial Insert Trials PS FB SZ 3-10, thicknesses 5 mm-12 mm
21
31 43
4
1
15
13
16
142
5
6
3
26
36 48
25
35 4717
27
37
11
12
9
10
8
7
18
28
38
23
33 45
19
29
3920
30
40
41
42
24
34 4622
32 44
Part Number Description
2545-05-427ATTUNE PS FB Insert Trial Tray size 3-10, thicknesses 5 mm-12 mm
2545-01-700 ATTUNE DePuy Synthes Lid
1 2545-05-256 ATTUNE PS FB Insert Trial Size 3 5 mm
2 2545-05-257 ATTUNE PS FB Insert Trial Size 3 6 mm
3 2545-05-258 ATTUNE PS FB Insert Trial Size 3 7 mm
4 2545-05-259 ATTUNE PS FB Insert Trial Size 3 8 mm
5 2545-05-261 ATTUNE PS FB Insert Trial Size 3 10 mm
6 2545-05-262 ATTUNE PS FB Insert Trial Size 3 12 mm
7 2545-05-263 ATTUNE PS FB Insert Trial Size 4 5 mm
8 2545-05-264 ATTUNE PS FB Insert Trial Size 4 6 mm
9 2545-05-265 ATTUNE PS FB Insert Trial Size 4 7 mm
10 2545-05-266 ATTUNE PS FB Insert Trial Size 4 8 mm
11 2545-05-268 ATTUNE PS FB Insert Trial Size 4 10 mm
12 2545-05-269 ATTUNE PS FB Insert Trial Size 4 12 mm
13 2545-05-270 ATTUNE PS FB Insert Trial Size 5 5 mm
14 2545-05-271 ATTUNE PS FB Insert Trial Size 5 6 mm
15 2545-05-272 ATTUNE PS FB Insert Trial Size 5 7 mm
16 2545-05-273 ATTUNE PS FB Insert Trial Size 5 8 mm
17 2545-05-275 ATTUNE PS FB Insert Trial Size 5 10 mm
18 2545-05-276 ATTUNE PS FB Insert Trial Size 5 12 mm
19 2545-05-277 ATTUNE PS FB Insert Trial Size 6 5 mm
20 2545-05-278 ATTUNE PS FB Insert Trial Size 6 6 mm
21 2545-05-279 ATTUNE PS FB Insert Trial Size 6 7 mm
22 2545-05-280 ATTUNE PS FB Insert Trial Size 6 8 mm
23 2545-05-282 ATTUNE PS FB Insert Trial Size 6 10 mm
Part Number Description24 2545-05-283 ATTUNE PS FB Insert Trial Size 6 12 mm
25 2545-05-284 ATTUNE PS FB Insert Trial Size 7 5 mm
26 2545-05-285 ATTUNE PS FB Insert Trial Size 7 6 mm
27 2545-05-286 ATTUNE PS FB Insert Trial Size 7 7 mm
28 2545-05-287 ATTUNE PS FB Insert Trial Size 7 8 mm
29 2545-05-289 ATTUNE PS FB Insert Trial Size 7 10 mm
30 2545-05-290 ATTUNE PS FB Insert Trial Size 7 12 mm
31 2545-05-291 ATTUNE PS FB Insert Trial Size 8 5 mm
32 2545-05-292 ATTUNE PS FB Insert Trial Size 8 6 mm
33 2545-05-293 ATTUNE PS FB Insert Trial Size 8 7 mm
34 2545-05-294 ATTUNE PS FB Insert Trial Size 8 8 mm
35 2545-05-296 ATTUNE PS FB Insert Trial Size 8 10 mm
36 2545-05-297 ATTUNE PS FB Insert Trial Size 8 12 mm
37 2545-05-298 ATTUNE PS FB Insert Trial Size 9 5 mm
38 2545-05-299 ATTUNE PS FB Insert Trial Size 9 6 mm
39 2545-05-300 ATTUNE PS FB Insert Trial Size 9 7 mm
40 2545-05-301 ATTUNE PS FB Insert Trial Size 9 8 mm
41 2545-05-303 ATTUNE PS FB Insert Trial Size 9 10 mm
42 2545-05-304 ATTUNE PS FB Insert Trial Size 9 12 mm
43 2545-05-305 ATTUNE PS FB Insert Trial Size 10 5 mm
44 2545-05-306 ATTUNE PS FB Insert Trial Size 10 6 mm
45 2545-05-307 ATTUNE PS FB Insert Trial Size 10 7 mm
46 2545-05-308 ATTUNE PS FB Insert Trial Size 10 8 mm
47 2545-05-310 ATTUNE PS FB Insert Trial Size 10 10 mm
48 2545-05-311 ATTUNE PS FB Insert Trial Size 10 12 mm
49 2545-05-436 ATTUNE Insert Trial Handle
49
36 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
OPTIONAL INSTRUMENTATIONTibial Insert Trials CR RP SZ 3-10, thicknesses 5 mm-12 mm
21
31 43
4
1
15
13
16
142
5
6
3
26
36 48
25
35 4717
27
37
11
12
9
10
8
7
18
28
38
23
33 45
19
29
3920
30
40
41
42
24
34 4622
32 44
Part Number Description
2545-05-430 ATTUNE CR RP Insert Trial Tray size 3-10, thicknesses 5 mm-12 mm
2545-01-700 ATTUNE DePuy Synthes Lid
1 2545-05-312 ATTUNE CR RP Insert Trial Size 3 5 mm
2 2545-05-313 ATTUNE CR RP Insert Trial Size 3 6 mm
3 2545-05-314 ATTUNE CR RP Insert Trial Size 3 7 mm
4 2545-05-315 ATTUNE CR RP Insert Trial Size 3 8 mm
5 2545-05-317 ATTUNE CR RP Insert Trial Size 3 10 mm
6 2545-05-318 ATTUNE CR RP Insert Trial Size 3 12 mm
7 2545-05-319 ATTUNE CR RP Insert Trial Size 4 5 mm
8 2545-05-320 ATTUNE CR RP Insert Trial Size 4 6 mm
9 2545-05-321 ATTUNE CR RP Insert Trial Size 4 7 mm
10 2545-05-322 ATTUNE CR RP Insert Trial Size 4 8 mm
11 2545-05-324 ATTUNE CR RP Insert Trial Size 4 10 mm
12 2545-05-325 ATTUNE CR RP Insert Trial Size 4 12 mm
13 2545-05-326 ATTUNE CR RP Insert Trial Size 5 5 mm
14 2545-05-327 ATTUNE CR RP Insert Trial Size 5 6 mm
15 2545-05-328 ATTUNE CR RP Insert Trial Size 5 7 mm
16 2545-05-329 ATTUNE CR RP Insert Trial Size 5 8 mm
17 2545-05-331 ATTUNE CR RP Insert Trial Size 5 10 mm
18 2545-05-332 ATTUNE CR RP Insert Trial Size 5 12 mm
19 2545-05-333 ATTUNE CR RP Insert Trial Size 6 5 mm
20 2545-05-334 ATTUNE CR RP Insert Trial Size 6 6 mm
21 2545-05-335 ATTUNE CR RP Insert Trial Size 6 7 mm
22 2545-05-336 ATTUNE CR RP Insert Trial Size 6 8 mm
23 2545-05-338 ATTUNE CR RP Insert Trial Size 6 10 mm
Part Number Description24 2545-05-339 ATTUNE CR RP Insert Trial Size 6 12 mm
25 2545-05-340 ATTUNE CR RP Insert Trial Size 7 5 mm
26 2545-05-341 ATTUNE CR RP Insert Trial Size 7 6 mm
27 2545-05-342 ATTUNE CR RP Insert Trial Size 7 7 mm
28 2545-05-343 ATTUNE CR RP Insert Trial Size 7 8 mm
29 2545-05-345 ATTUNE CR RP Insert Trial Size 7 10 mm
30 2545-05-346 ATTUNE CR RP Insert Trial Size 7 12 mm
31 2545-05-347 ATTUNE CR RP Insert Trial Size 8 5 mm
32 2545-05-348 ATTUNE CR RP Insert Trial Size 8 6 mm
33 2545-05-349 ATTUNE CR RP Insert Trial Size 8 7 mm
34 2545-05-350 ATTUNE CR RP Insert Trial Size 8 8 mm
35 2545-05-352 ATTUNE CR RP Insert Trial Size 8 10 mm
36 2545-05-353 ATTUNE CR RP Insert Trial Size 8 12 mm
37 2545-05-354 ATTUNE CR RP Insert Trial Size 9 5 mm
38 2545-05-355 ATTUNE CR RP Insert Trial Size 9 6 mm
39 2545-05-356 ATTUNE CR RP Insert Trial Size 9 7 mm
40 2545-05-357 ATTUNE CR RP Insert Trial Size 9 8 mm
41 2545-05-359 ATTUNE CR RP Insert Trial Size 9 10 mm
42 2545-05-360 ATTUNE CR RP Insert Trial Size 9 12 mm
43 2545-05-361 ATTUNE CR RP Insert Trial Size 10 5 mm
44 2545-05-362 ATTUNE CR RP Insert Trial Size 10 6 mm
45 2545-05-363 ATTUNE CR RP Insert Trial Size 10 7 mm
46 2545-05-364 ATTUNE CR RP Insert Trial Size 10 8 mm
47 2545-05-366 ATTUNE CR RP Insert Trial Size 10 10 mm
48 2545-05-367 ATTUNE CR RP Insert Trial Size 10 12 mm
49 2545-05-436 ATTUNE Insert Trial Handle
49
37 DePuy Synthes Companies ATTUNE® Knee System Ordering Information
OPTIONAL INSTRUMENTATIONTibial Insert Trials PS RP SZ 3-10, thicknesses 5 mm-12 mm
21
31 43
4
1
15
13
16
142
5
6
3
26
36 48
25
35 4717
27
37
11
12
9
10
8
7
18
28
38
23
33 45
19
29
3920
30
40
41
42
24
34 4622
32 44
Part Number Description
2545-05-433ATTUNE PS RP Insert Trial Tray size 3-10, thicknesses 5 mm-12 mm
2545-01-700 ATTUNE DePuy Synthes Lid
1 2545-05-368 ATTUNE PS RP Insert Trial Size 3 5 mm
2 2545-05-369 ATTUNE PS RP Insert Trial Size 3 6 mm
3 2545-05-370 ATTUNE PS RP Insert Trial Size 3 7 mm
4 2545-05-371 ATTUNE PS RP Insert Trial Size 3 8 mm
5 2545-05-373 ATTUNE PS RP Insert Trial Size 3 10 mm
6 2545-05-374 ATTUNE PS RP Insert Trial Size 3 12 mm
7 2545-05-375 ATTUNE PS RP Insert Trial Size 4 5 mm
8 2545-05-376 ATTUNE PS RP Insert Trial Size 4 6 mm
9 2545-05-377 ATTUNE PS RP Insert Trial Size 4 7 mm
10 2545-05-378 ATTUNE PS RP Insert Trial Size 4 8 mm
11 2545-05-380 ATTUNE PS RP Insert Trial Size 4 10 mm
12 2545-05-381 ATTUNE PS RP Insert Trial Size 4 12 mm
13 2545-05-382 ATTUNE PS RP Insert Trial Size 5 5 mm
14 2545-05-383 ATTUNE PS RP Insert Trial Size 5 6 mm
15 2545-05-384 ATTUNE PS RP Insert Trial Size 5 7 mm
16 2545-05-385 ATTUNE PS RP Insert Trial Size 5 8 mm
17 2545-05-387 ATTUNE PS RP Insert Trial Size 5 10 mm
18 2545-05-388 ATTUNE PS RP Insert Trial Size 5 12 mm
19 2545-05-389 ATTUNE PS RP Insert Trial Size 6 5 mm
20 2545-05-390 ATTUNE PS RP Insert Trial Size 6 6 mm
21 2545-05-391 ATTUNE PS RP Insert Trial Size 6 7 mm
22 2545-05-392 ATTUNE PS RP Insert Trial Size 6 8 mm
23 2545-05-394 ATTUNE PS RP Insert Trial Size 6 10 mm
Part Number Description24 2545-05-395 ATTUNE PS RP Insert Trial Size 6 12 mm
25 2545-05-396 ATTUNE PS RP Insert Trial Size 7 5 mm
26 2545-05-397 ATTUNE PS RP Insert Trial Size 7 6 mm
27 2545-05-398 ATTUNE PS RP Insert Trial Size 7 7 mm
28 2545-05-399 ATTUNE PS RP Insert Trial Size 7 8 mm
29 2545-05-401 ATTUNE PS RP Insert Trial Size 7 10 mm
30 2545-05-402 ATTUNE PS RP Insert Trial Size 7 12 mm
31 2545-05-403 ATTUNE PS RP Insert Trial Size 8 5 mm
32 2545-05-404 ATTUNE PS RP Insert Trial Size 8 6 mm
33 2545-05-405 ATTUNE PS RP Insert Trial Size 8 7 mm
34 2545-05-406 ATTUNE PS RP Insert Trial Size 8 8 mm
35 2545-05-408 ATTUNE PS RP Insert Trial Size 8 10 mm
36 2545-05-409 ATTUNE PS RP Insert Trial Size 8 12 mm
37 2545-05-410 ATTUNE PS RP Insert Trial Size 9 5 mm
38 2545-05-411 ATTUNE PS RP Insert Trial Size 9 6 mm
39 2545-05-412 ATTUNE PS RP Insert Trial Size 9 7 mm
40 2545-05-413 ATTUNE PS RP Insert Trial Size 9 8 mm
41 2545-05-415 ATTUNE PS RP Insert Trial Size 9 10 mm
42 2545-05-416 ATTUNE PS RP Insert Trial Size 9 12 mm
43 2545-05-417 ATTUNE PS RP Insert Trial Size 10 5 mm
44 2545-05-418 ATTUNE PS RP Insert Trial Size 10 6 mm
45 2545-05-419 ATTUNE PS RP Insert Trial Size 10 7 mm
46 2545-05-420 ATTUNE PS RP Insert Trial Size 10 8 mm
47 2545-05-422 ATTUNE PS RP Insert Trial Size 10 10 mm
48 2545-05-423 ATTUNE PS RP Insert Trial Size 10 12 mm
49 2545-05-436 ATTUNE Insert Trial Handle
49
Limited Warranty and Disclaimer: DePuy Synthes Joint Reconstruction products are sold with a limited warranty to the original purchaser against defects in workmanship and materials. Any other express or implied warranties, including warranties of merchantability or fitness, are hereby disclaimed.
WARNING: In the USA, this product has labeling limitations. See package insert for complete information.
CAUTION: USA Law restricts these devices to sale by or on the order of a physician.
To order in the US, call DePuy Synthes Joint Reconstruction Customer Service (800) 473-3789.
Not all products are currently available in all markets. The third party trademarks used herein are trademarks of their respective owners.
© DePuy Synthes 2015, 2018. All rights reserved. DSUS/JRC/1114/0570(4) 01/18
DePuy (Ireland)Loughbeg, RingaskiddyCo. Cork, IrelandTel: +353 21 4914 000Fax: +353 21 4914 199
0086
DePuy Orthopaedics, Inc.700 Orthopaedic DriveWarsaw, IN 46582USATel: +1 (800) 366-8143Fax: +1 (800) 669-2530
www.depuysynthes.com
DePuy International, Ltd.St Anthony’s RoadLeeds LS11 8DTEnglandTel: +44 (0) 113 270 0461
