1 TUBE AND TUBE ACCESSORIES A.K.INDUSTRIES (INDIA) INSTRUMENTATION TUBE Introduction:- AKI has been a leading supplier in SS/COPPER tubes in Indian market as well as overseas. Our tube are made on the basis of ball testing which does not lead to ovality in tube. Tube are manufactured with perfect ratio of stress in them. Tube are available in both meter as well as coil form 50mtr /100mtrs. We have wide range of tube starting from 1/16” to 1” tube. Features:- . It is provide with sleeve . Good rigidity and stress ration . Available in coil as well as meter form . Smooth and aluminum finishing . PU coated available Material of construction:- SS 304/ SS 316/ copper/ PTF / PVC Size: - 1/16” , 1/8” , 1/4" , 1/2", 3/8”, 3/4", 1”
Transcript
1 TUBE AND TUBE ACCESSORIES
A.K.INDUSTRIES (INDIA)
INSTRUMENTATION TUBE
Introduction:- AKI has been a leading supplier in SS/COPPER tubes in Indian market as well as overseas. Our tube are made on the basis of ball testing which does not lead to ovality in tube. Tube are manufactured with perfect ratio of stress in them. Tube are available in both meter as well as coil form 50mtr /100mtrs. We have wide range of tube starting from 1/16” to 1” tube. Features:- . It is provide with sleeve . Good rigidity and stress ration . Available in coil as well as meter form . Smooth and aluminum finishing . PU coated available Material of construction:- SS 304/ SS 316/ copper/ PTF / PVC Size: - 1/16” , 1/8” , 1/4" , 1/2", 3/8”, 3/4", 1”
2 TUBE AND TUBE ACCESSORIES
A.K.INDUSTRIES (INDIA)
TUBE BENDER
Introduction:- A.K.I hand tube benders provide consistent ,high-quality bends in tubing made from materials that can be used with A.K.I tube fittings. Features:- . The hand tube bender is available in 1/4, 5/16, 3/8, and1/2 in., as well as 6, 8, 10, and 12 mm tubing sizes. .Handle design provides enhanced leverage for bends greater than 90°. .Roll dies reduce bending force and tube ovality, as compared to conventional slide block design. .1 to 180° bending range.
3 TUBE AND TUBE ACCESSORIES
A.K.INDUSTRIES (INDIA)
TUBE CLAMP
TUBE CLAMPS LIGHT SERIES
Introduction:- The standard series Pipe clamps are designed according to DIN 3015 - Part - 1 available in Plastic, Aluminum clamp bodies with Steel / S. S. plates & bolts standard series Pipe - tube clamps are normally used for general Purpose applications & the W.P. range up to 1500 PSI (100 BAR) in the Steel / stainless steel Piping System. Standard series pipe - tube clamps are available along with Multilayer, welding plates, rail nuts, construction types, rubber inlay types & many more
TUBE CLAMPS HEAVY SERIES
Introduction:-
Heavy series Pipe clamps are designed according to DIN 3015 - Part - 2 available in Plastic, Aluminum clamp bodies with Steel / S.S. plates & bolts Heavy series Pipe - Tube clamps are normally used for general Purpose applications & the W.P. range more than 1500 PSI (100 BAR) and up to 8000 psi (600 BAR) in the Steel / stainless steel Piping System. Heavy series pipe - tube clamps are available along with Multilayer, welding plates, rail nuts, construction types, rubber inley types & many more.
4 TUBE AND TUBE ACCESSORIES
A.K.INDUSTRIES (INDIA)
TUBE CLAMPS TWIN SERIES
Introduction:- Twin Series clamps are designed to clamp two identical Pipe - tube to the Piping Systems. Twin series clamps are available in Sizes from 6 MM od up to 42 MM od. Twin Series clamps are capable to resist W.P. up to 1500psi (100 Bar) in the Piping Systems. Twin Series clamps are designed with thick plates & heavy bolts to resist High Pressure Piping Application Twin Series clamps are available in Plastic - PP / PA (6) with Steel & stainless steel Plates & bolts. Twin Series pipe - tube clamps are available along with Multilayer, welding plates, rail nuts, construction types, rubber inlay types & many more.
