Page 1
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 1
Index – Page 1 of 3 Page No Description Make Size range
4 M.S & G.I Pipes as per IS -1239 JINDAL/TATA ½” to 6”
C.S seamless Non IBR & IBR Pipes sch 40 & sch 80 MSL/JSW/Imported ½” to 20”
5 M.S & G.I ERW Pipes s per IS 3589 BEST INDIAN MAKE 8” to 20”
6 M.S Square Tubes BEST INDIAN MAKE 25mm to 150 mm
7 M.S Rectangular Tubes BEST INDIAN MAKE 50x 25 to 200 x 100 mm
8 S.S 304 Pipes as per Sch 10 & sch 40 Imported ½” to 12” N.B
S.S 304 Flanges & Fittings Imported ½” to 8” N.B
9 S.S 316 Pipes as per Sch 10 & sch 40 Imported ½” to 12” N.B
S.S 316 Flanges & Fittings Imported ½” to 8” N.B
10 IC fittings Screwed end SS 304 Imported / BEST INDIAN
MAKE
¼” to 2”
S.S 304 Buttweld Reducers ERW Sch 10 Imported / BEST INDIAN
MAKE
¾” to 12”
11 M.S Slipon Flanges as per BS , ASA & IS stds TMI / Eq ½” to 5”
12 M.S Slipon Flanges as per BS , ASA & IS stds TMI / Eq 6” to 24”
13 M.S Dummy(Blind) Flanges as per BS , ASA & IS stds TMI / Eq ½” to 5”
14 M.S Dummy(Blind) Flanges as per BS , ASA & IS stds TMI / Eq 6” to 24”
15 M.S & G.I Screwed Flanges BEST INDIAN MAKE ½” to 8”
16 M.S & G.I Buttweld Long Bends in ERW B , ERW C , Seamless Sch 40 , ISS ,
U/Return Bends . Omega Expansion Bends
BEST INDIAN MAKE ½” to 16”
17 M.S & G.I Buttweld Elbows in ERW B , ERW C , Seamless Sch 40 , Sch 80 , 90
degree , 45 degree , ,G.I electroplating & Hot dip galvanized.
BEST INDIAN MAKE ½” to 20”
18 M.S Reducers ERW in Concentric & Eccentric BEST INDIAN MAKE ¾” to 20”
19 M.S Reducers Seamless Sch 40 & Sch 80 in Concentric & Eccentric BEST INDIAN MAKE ¾” to 16”
20 M.S Tee in ERW & Seamless Equal & Reducing BIM/ Imported ½” to 24”
Page 2
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 2
Index Page 2 of 3 S.No Description Make Size range
21 C.S Buttweld Cap Seamless Sch 40 & Sch 80 BEST INDIAN MAKE 1” to 24”
F.C.S A 105 Flanges as per ANSI SORF , SWRF , WNRF BEST INDIAN MAKE ½” to 20”
22 M.S Forged Fittings S/E to BSP 1000 lbs Equal and Reducings VS / BEST INDIAN MAKE ¼” to 3”
23 M.S Forged Fittings Socketweld Ends 3000 lbs Equal and Reducings VS / BEST INDIAN MAKE ½” to 2”
24
Forged Fittings S/E 3000 lbs to NPT BEST INDIAN MAKE ½” to 3”
CAST Steel Fittings S/E to BSP BEST INDIAN MAKE ½” to 4”
CAST Steel Bush BEST INDIAN MAKE 1 ½” to 6”
25 M.S Pipe Nipple In ERW B , ERW C , Seamless Sch 40 BEST INDIAN MAKE ¼” to 6”
M.S Cal Steel Fittings S/E to BSP BEST INDIAN MAKE 1 ½” to 4”
26 G.I Pipe Nipple ERW B & ERW A BEST INDIAN MAKE ½” to 4”
G.I U Clamps 8 mm , 10 mm & 12 mm thk BEST INDIAN MAKE ½” to 12”
27 G.I ISI Fittings S/E to BSP Equal & Reducing BEST INDIAN MAKE ½” to 6”
G.I R Brand Fittings S/E to BSP Equal & Reducing R Brand ½” to 6”
28
C.S Flanges & Fittings with I.B.R JR / Eq ½” to 12”
F.C.S S/E Fittings with I.B.R JR / Eq ½” to 2”
F.C.S S/W Fittings with I.B.R JR / Eq ½” to 2”
29 C.S Reducer Sch 40 Conc & Eccn with I.B.R JR / Eq ¾” to 8”
30 Ball Valves S/E to BSP in C.I , C.S , G.M , F.C.S in Single Pcs design & 3 Pcs design BAJPAI/FLOWJET/IMPORTED ¼” to 6”
G.M Gate Valve S/E ISI R BRAND ¼” to 6”
31 Ball Valves F/E to Class 150 in C.I , C.S , G.M , F.C.S in Single Pcs design & 3 Pcs design FLOWJET ½” to 10”
C.I Butterfly Valves BAJPAI /FLOWJET/AUDCO 1” to 14”
32 CAST Steel Valves ( Gate / Globe / Check / Y Strainer ) in class 150 & class 300 ratings CREST/FLOWJET 1” to 12”
Page 3
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 3
Index page 3 of 3 S.No Description Make Size range
33
C.I Sluice Valves ISI & Non ISI DIVINE 1” to 12”
C.I NRV ( Refleux ) Valve DIVINE 1 ½” to 12”
C.I Y Strainer F/E CREST / VALSON ½” to 12”
C.I T Pot Strainer F/E VALSON 1 ½” to 12”
C.I Foot Valve Swing Type & Lift Type DIVINE/ V V 2” to 12”
34
S.S Needle Valve Barstock ( 202 / 304 / 316 ) BAJPAI/ FLOWJET ¼” TO 2”
CAST IRON DIAPHRAGM VALVE ( Unlined / Rubber Lined / Ebonite Lined & Spare Diaphragm) BSCO ¾” to 6”
G.M Valves Steam Line ATAM ½” to 2”
35
C.I Gland Cock / Taper Plug Valve DIVINE FLOWJET
½” to 6”
Side Flow Indicator FLOWJET 1” to 4”
FCS Non IBR ( Gate / Globe / Check ) Valves & I.B.R FLOWJET ½” to 2”
SS 420 Steam Trap Thermodynamic FLOWJET ½” to 1”
36
M.S Wafer Check Valve , C.I Dual plate check valve FLOWJET 1 ½” to 12”
S.S Non Slam Check Valve FLOWJET ½” to 4”
C.I Y Strainer S/E & F/E FLOWJET / VALSON ½” to 12”
C.I Pulp Valve / Knife Edge Gate Valves BAJPAI/V V 2” to 16”
37 Water Meter KRANTI / KUSHAL ½” to 24”
38 CAST Steel Valves I.B.R ( Gate / Globe / Check / Y strainer) FLOWJET 1” to 12”
Bronze Valves I.B.R ATAM ½” to 3”
39 Cast Iron Valves I.B.R ATAM ½” to 12”
40 Cast Steel Valves I.B.R ATAM ½” to 2 ½”
Page 4
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 4
PIPES
M.S “B”Class M.S “C”Class G.I “B”Class G.I “C”Class C.S NON IBR C.S IBR
Jindal Tata Jindal Tata Jindal Tata Jindal Tata Sch.40 Sch.80 Sch.40 Sch.80
½” 93.84 110.00 111.37 132.00 115.50 167.75 135.78 203.50 184.25 239.25 217.93 277.75
¾” 102.75 131.31 134.75 156.75 147.12 204.88 173.73 234.06 221.38 284.63 267.82 332.06
1” 169.12 190.02 204.18 227.50 216.94 297.45 249.90 345.13 288.75 386.37 306.62 398.75
1 ¼” 216.56 237.32 262.62 285.31 271.90 319.00 321.27 389.81 361.63 475.20 403.56 532.67
1 ½” 247.50 273.76 300.43 343.78 311.78 363.83 373.65 418.92 427.63 585.75 469.76 633.87
2” 350.62 383.48 432.43 472.45 422.68 480.79 510.47 619.44 565.12 745.94 619.78 860.61
2 ½” 451.00 489.15 555.50 578.53 529.51 642.46 646.25 775.27 892.37 1186.62 966.07 1296.62
3” 576.00 622.87 679.25 745.94 686.13 846.08 818.20 987.25 1186.63 1606.00 1259.02 1754.50
4” 844.25 902.00 984.50 1076.63 957.00 1189.83 1148.13 1406.62 1641.75 2341.62 1806.75 2535.50
5” 1082.12 1197.00 1200.50 1325.50 1370.88 - 1512.50 - 2237.13 3074.50 2436.50 3555.85
6” 1293.87 1423.00 1435.50 1579.05 1560.62 1863.12 1744.87 2059.75 2836.63 4207.50 3201.00 4961.00
8” - - - - - - - - 4391.75 6370.37 4668.12 7150.00
10” - - - - - - - - 6296.75 9504.00 6590.37 11150.00
12” - - - - - - - - 9072.25 12904.37 9374.75 15496.00
Page 5
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 5
G.I ERW PIPES LARGE DIA AS PER IS 3589
Size / Thickness
3.2mm 4.0mm 4.5mm 5.0mm 5.4mm 6.0mm 6.35mm 8.0mm
8” 1618.37 1949.75 - 2363.62 - 2781.63 - -
10” - - - 3025.00 - 3670.75 - -
12” - - - 3569.50 - 3950.75 - -
14” - - - - - - - -
16” - - - -- - - - -
18” - - - - -- - - -
M.S ERW PIPES LARGE DIA AS PER IS 3589
Size / Thickness
3.2mm 4.0mm 4.5mm 5.0mm 5.4mm 6.0mm 6.35mm 8.0mm
8” 1375.00 1577.12 1813.85 1962.15 2106.50 2355.37 2502.50 3137.75
10” - 2250.88 2532.30 2501.10 2701.20 2964.50 3202.37 3999.90
12” - 2371.65 2667.95 2964.50 3201.70 3636.88 3811.50 4706.62
14” - - - 3334.35 - 3999.88 - 5335.00
16” - - - 3847.25 - 4486.62 - 6213.00
18” - - - 4251.50 - 5050.37 - 6737.50
20” - - - 4750.60 - 5769.50 - 7341.12
Page 6
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 6
M.S Square Tube ERW Rate M.S Square Tube ERW Rate
025 mm x 25 mm 1.6 mm thk 94.18 050 mm x 50 mm 1.6 mm thk 189.75
025 mm x 25 mm 1.8 mm thk 101.52 050 mm x 50 mm 1.8 mm thk 213.13
025 mm x 25 mm 2.0 mm thk 113.44 050 mm x 50 mm 2.0 mm thk 239.25
025 mm x 25 mm 2.3 mm thk 125.15 050 mm x 50 mm 2.6 mm thk 302.50
025 mm x 25 mm 3.0 mm thk 161.79 050 mm x 50 mm 2.9 mm thk 327.25
030 mm x 30 mm 1.6 mm thk 112.75 050 mm x 50 mm 4.0 mm thk 453.75
030 mm x 30 mm 1.8mm thk 125.12 072 mm x 72 mm 2.0 mm thk 327.25
030 mm x 30 mm 2.0 mm thk 138.32 072 mm x 72 mm 2.6 mm thk 429.00
030 mm x 30 mm 2.3 mm thk 161.77 072 mm x 72 mm 2.9 mm thk 466.13
040 mm x 40 mm 1.6 mm thk 151.48 080 mm x 80 mm 2.6 mm thk 492.25
040 mm x 40 mm 1.8 mm thk 175.08 080 mm x 80 mm 3.5 mm thk 668.25
040 mm x 40 mm 2.0 mm thk 189.75 080 mm x 80 mm 4.0 mm thk 730.13
040 mm x 40 mm 2.3 mm thk 213.13 100 mm x 100 mm 3.0 mm thk 683.87
040 mm x 40 mm 2.6 mm thk 239.25 100 mm x 100 mm 4.0 mm thk 921.25
040 mm x 40 mm 2.9 mm thk 264.00 150 mm x 150 mm 4.0 mm thk 1425.88
040 mm x 40 mm 4.0 mm thk 352.00
Page 7
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 7
M.S Rectangular Tube ERW Rate M.S Rectangular Tube ERW Rate
050 mm x 25 mm 1.6 mm thk 138.87 100 mm x 50 mm 1.8 mm thk 318.88
050 mm x 25 mm 1.8 mm thk 162.25 100 mm x 50 mm 2.0 mm thk 353.38
050 mm x 25 mm 2.0 mm thk 174.63 100 mm x 50 mm 2.6 mm thk 453.75
050 mm x 25 mm 2.3 mm thk 200.75 100 mm x 50 mm 3.5 mm thk 617.38
060 mm x 40 mm 1.6 mm thk 189.75 122 mm x 61 mm 2.6 mm thk 543.13
060 mm x 40 mm 1.8 mm thk 214.50 122 mm x 61 mm 3.2 mm thk 666.88
060 mm x 40 mm 2.0 mm thk 239.25 122 mm x 61 mm 3.5 mm thk 757.63
060 mm x 40 mm 2.3 mm thk 264.00 122 mm x 61 mm 4.0 mm thk 833.25
080 mm x 40 mm 1.6 mm thk 228.00 145 mm x 82 mm 3.2 mm thk 819.50
080 mm x 40 mm 1.8 mm thk 251.63 145 mm x 82 mm 4.0 mm thk 1021.63
080 mm x 40 mm 2.0 mm thk 277.75 172 mm x 92 mm 3.2mm thk 970.75
080 mm x 40 mm 2.3 mm thk 327.25 172 mm x 92 mm 4.0 mm thk 1212.75
080 mm x 40 mm 2.6 mm thk 364.38 200 mm x 100 mm 4.0 mm thk 1424.50
080 mm x 40 mm 4.0 mm thk 492.25 200 mm x 100 mm 5.0 mm thk 1766.88
096 mm x 48 mm 3.2 mm thk 541.75
096 mm x 48 mm 4.0 mm thk 643.50
Page 8
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 8
S.S 304 FLANGES AND FITTINGS
Size / Std Tee Thick
ASA Flange
CQ SORF 304 BLRF
304 BLRF ASA
304 Dummy
T/D
304 Dummy
T/E
sch 10 sch 40
½” 78.00 96.75 9 mm 207.90 210.60 248.00 159.00 214.65
¾” 103.00 124.80 9 mm 255.75 259.00 340.00 206.00 270.65
1” 140.40 159.15 12 mm 354.20 362.80 430.50 274.50 274.50
1 ¼” 218.40 280.80 14 mm 520.80 530.15 580.75 351.00 438.75
1 ½” 273.00 327.60 14 mm 620.00 630.00 720.75 398.00 501.25
2” 393.15 486.75 16 mm 891.25 936.00 1061.75 554.00 624.00
2 ½” 580.30 1029.60 19 mm 1317.50 1404.0 1712.90 632.00 761.25
3” 730.00 1404.00 19 mm 1550.00 1731.6 2191.80 1045.00 1193.40
4” 1193.40 2262.00 19 mm 2139.00 2620.8 3237.00 1240.00 1701.90
5” 1965.60 4524.00 20 mm 2790.00 3556.8 3993.60 2098.00 2714.40
6” 2620.80 5616.00 22 mm 3177.50 4492.8 5046.60 3691.00 3946.80
8” 4680.00 12168.00 24 mm 5037.50 7300.8 8985.60 5074.00 6091.80
10” - - - - - - - - - - - - -
12” - - - - - - - - - - - - -
S.S FITTINGS ERW #304
Size / Pipe Flanges Long Bend Short Stub End Long Stub End Elbow Cap
Std Sch 10 sch 40 asa table D table E sch 10 sch 40 sch10# sch 40# sch 10# sch
40# Sch 10# Sch 40# sch 10 sch 40
½” 334.13 507.36 248.00 158.00 198.00 96.75 112.35 21.85 25.00 56.15 65.50 46.80 56.10 56.15 65.50
¾” 429.00 563.75 333.25 204.60 265.00 127.90 149.75 28.10 31.20 65.50 84.25 65.50 74.90 65.50 74.90
1” 655.88 785.13 418.50 263.50 264.00 168.50 179.40 34.30 39.00 84.25 93.60 81.15 85.80 93.60 103.00
1 ¼” 844.25 1062.88 565.75 334.80 335.00 296.40 374.40 40.50 56.15 112.30 132.60 121.70 139.50 112.30 132.60
1 ½” 974.88 1274.63 686.40 379.75 475.00 337.00 421.20 49.90 71.75 131.05 159.15 165.35 178.25 140.40 168.50
2” 1238.38 1713.25 1007.50 496.00 589.00 524.20 655.20 71.75 84.25 206.00 252.75 252.70 286.75 205.90 265.20
2 ½” 1761.38 2708.75 1612.00 565.75 720.00 861.15 1684.80 93.60 159.10 262.10 382.20 427.80 706.80 243.35 351.00
3” 2025.38 3542.00 1798.00 813.75 1038.50 1357.20 2207.40 112.30 187.20 299.50 491.40 624.00 1069.50 299.50 561.60
4” 2624.88 5040.75 2470.00 1085.00 1325.25 2340.00 5241.60 187.20 351.00 421.20 733.20 1068.60 2046.00 421.20 975.00
5” 3733.50 7645.00 3103.00 1813.50 2084.75 5054.40 8775.00 243.35 533.50 600.60 1029.60 2046.00 3837.60 624.00 1521.00
6” 4450.88 9927.50 3572.80 2672.10 3216.25 6552.00 13260.00 262.00 655.20 776.90 1341.60 2808.00 5616.00 936.00 2340.00
8” 6428.13 14943.00 6289.35 3410.00 4542.00 15912.00 28080.00 524.15 1497.60 1404.00 2301.00 6747.00 12168.00 1326.00 -
10” 8984.25 22687.00 - - - - - - - - - - - - -
12” 11636.63 27296.00 - - - - - - - - - - - - -
Page 9
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 9
S.S ERW 316 FLANGES AND FITTINGS
Size / Std TEE # 316 sch
10
# 316 sch
40
sch 10 sch 40
½” 103.00 112.50 481.25 598.13
¾” 124.80 140.40 591.25 786.50
1” 163.80 187.20 947.38 1130.25
1 ¼” 273.00 319.80 1258.13 1592.25
1 ½” 343.20 393.25 1405.25 1828.75
2” 430.50 580.50 1808.13 2440.63
2 ½” 748.80 1162.20 2554.75 4070.00
3” 920.40 1591.20 2915.00 5101.25
4” 1357.20 2730.00 3746.88 7297.13
5” 2433.60 4492.80 5296.50 9842.25
6” 3276.00 7113.60 5278.25 13299.00
8” 6552.00 14040.00 9462.75 20460.00
10” - - 13359.50 28998.75
12” - - 17304.38 35488.75
S.S FITTINGS ERW #316
Size / Pipe Flanges Long Bend Short Stub End Long Stub End Elbow Cap
Std Sch 10 sch 40 asa table D table E sch 10 sch 40 sch10# sch 40# sch 10# sch 40# Sch 10# Sch 40# sch 10 sch 40
½” 333.25 196.50 246.00 112.40 132.60 34.30 37.50 62.40 74.90 56.15 65.50 62.40
¾” 426.25 252.70 315.90 149.75 168.50 37.45 43.70 81.15 93.60 74.90 84.25 70.20
1” 546.00 354.00 367.00 196.50 210.60 46.80 53.00 103.00 112.35 96.75 103.00 101.40
1 ¼” 7464.40 410.00 429.00 280.80 337.00 65.50 85.80 132.60 149.75 132.60 168.50 124.80
1 ½” 897.00 507.00 660.00 397.80 468.00 74.90 102.95 140.40 187.20 196.50 234.00 156.00
2” 1380.00 569.40 764.40 585.00 694.20 85.80 121.70 234.00 280.80 290.15 351.00 218.40
2 ½” 2098.20 717.60 858.00 1170.00 2067.00 159.15 243.35 284.00 491.40 585.00 982.80 265.20
3” 2464.50 1045.20 1240.20 1684.80 2659.80 179.40 299.50 351.00 617.75 842.40 1310.40 327.60
4” 3309.25 1287.00 1521.00 2620.80 5054.40 243.35 421.20 483.60 959.40 1271.40 2527.20 -
5” 2975.75 2191.80 2667.60 5616.00 10764.00 336.95 678.60 711.35 1326.00 1809.60 5054.40 -
6” 4570.80 2718.20 3425.75 6552.00 16848.00 374.40 842.40 865.80 1684.80 3182.40 6552.00 -
8” 7998.00 4001.40 5428.80 19656.00 40560.00 617.75 1965.60 1716.00 2902.00 8424.00 14601.60 -
10” - - - - - - - - - - - -
12” - - - - - - - - - - - -
Page 10
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 10
IC FITTINGS SS 304
Size / type ¼” 3/8” ½” ¾” 1” 1 ¼” 1 ½” 2”
Elbow 80.44 103.13 128.75 198.69 290.13 455.13 625.63 985.88
Tee 121.00 159.15 184.25 258.50 422.13 649.00 848.38 1216.88
Hex nipple 55.00 66.69 73.38 114.13 188.38 251.63 325.88 479.88
Coupling 52.25 63.25 97.63 149.88 243.38 363.00 485.38 715.00
Union 167.75 203.50 193.88 269.50 415.25 585.75 778.25 1197.63
Hose nipple 68.75 82.50 93.50 149.88 221.38 339.63 473.00 694.38
Plug 47.44 61.88 69.09 104.50 138.08 178.75 257.13 382.25
S.S REDUCER SS 304 sch 10 Size Conc Eccn Size Conc Eccn Size Conc Eccn
¾ “ x ½” 38.50 43.70 3” x 1 ½” 319.30 633.35 8” X 6” 1453.00 3218.50
1’ x ¾ ‘ 70.00 74.90 3” x 1 ¼” 348.75 383.25 8” x 5” 1483.70 3282.65
1” x ½ “ 71.00 76.30 3” x 1” 435.55 780.00 8” x 4” 1647.65 3510.00
1 ¼“ x 1” 87.00 98.30 4” x 3” 426.25 878.25 8” x 3” 1743.75 3608.25
1¼” x ¾ “ 107.00 126.35 4” x 2 ½” 432.50 895.85 8” x 2 ½” 1937.50 3900.00
1¼“x ½ “ 126.00 146.65 4” x 2” 465.00 936.00 10” x 8” 2535.00 6338.25 1½ “ x 1¼” 107.00 126.35 4 x 1 ½” 523.90 1073.25 10” x 6” 2925.00 6630.00
1½“ x 1 ” 110.00 128.45 4”x 1¼” 581.25 1170.00 10” x 5” 3120.00 6825.00
1½“x ¾ “ 136.00 156.00 4” x 1” 678.90 1365.00 10” x 4” 3510.00 7800.00
1½“ x ½ “ 175.00 195.00 5” x 4” 872.65 1755.00 12” x 10” 4290.00 11310.00
2” x 1 ½ “ 194.00 234.00 5” x 3” 895.20 1790.10 12” x 8” 4386.00 11536.20
2” x 1¼ “ 213.90 254.30 5” x 2 ½” 920.70 1853.25 12” x 6” 4875.00 12090.00
2” x 1” 215.90 259.40 5” x 2 968.75 1950.00 12” x 5” 4972.50 12452.70
2” x ¾ ” 252.65 293.25 6” x 5” 1066.40 2145.00 12” x 4” 5850.00 13260.00
2” x ½ “ 271.25 321.35 6” x 4” 1080.15 2187.90
2 ½ “x2” 213.90 438.35 6” x 3” 1100.40 2243.25 2 ½”x1 ½” 252.65 488.25 6” x 2 ½” 1120.50 2438.25 2 ½”x1 ¼” 330.15 536.65 6” x 2” 1162.50 2535.00
2 ½”x1” 340.25 585.00
3” x 2 ½” 252.65 546.00
3” x 2” 258.85 558.00
Page 11
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 11
M.S SLIPON FLANGE ( MARKET QUALITY) Size
In mm
N.B
BS- 10(1962) ANSI–B 16.5 IS – 6392
T/D T/E T/F T/H ASA 150 ASA 300 PN-10 PN-16 PN-40 ISS T/E
15 - 37.13 46.75 78.38
68.75 12mm
43..31
31.63(10mm) 79.75 77.00 77.00 -
20 - 41.25 50.88 78.38
68.75 12mm 56.38 116.88 94.88 94.88 -
25 - 50.88 71.50 115.50
107.25 13mm
82.50
56.38(11mm) 158.13 115.50 115.50 -
32 - 56.38 99.00 173.25
148.50 16mm
108.63
103.13(14mm)
82.50(12mm)
192.50 162.25 162.25 -
40 63.25 77.00 104.50 188.38
162.25 16mm
137.50
121.00(16mm)
107.25(14mm)
217.25 171.88 171.88 -
50 81.13 94.88
204.88
178.38(14mm)
126.50(12mm)
247.50
202.13
154.00(16mm)
145.75 (14mm)
118.38(12mm)
261.25 268.13 268.13 -
65 92.13 105.88 251.63
218.63 (13mm) 309.38
336.38
277.75(20mm)
247.50(16mm)
220.00(14mm)
474.39
372.63(20mm) 343.75 343.75 192.50 (12mm)
80 132.00 151.25 299.75
253.00(14mm)
464.75
385.00 20mm
367.13
295.63(20mm)
261.25(16mm)
222.75(14mm)
625.63
477.13(25mm) 385.00 385.00 198.00 (12mm)
100 154.00 165.00 398.00 316.25
(16mm) 550.00 (25mm)
508.75
391.88(20mm)
302.50(16mm)
962.50
893.75(28mm)
770.00(25mm)
419.38 419.38
125 199.38 398.75
321.75(13mm)
947.38
605.00 20mm
1113.75
790.63(25mm)
570.63
433.13(20mm)
391.88(16mm)
1395.63 605.00 605.00 412.50 (13mm)
NOTE : (1) MACHINED ALL OVER AS PER BOOK WITHOUT ANY NEGATIVE ALSO AVAILABLE AGAINST ENQUIRY.
(2) THICK MENTIONED ABOVE WITHOUT MACHINING TOLERANCE.
(3) ENQUIRY FOR HIGHER SIZES SOLICITED.
Page 12
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 12
M.S SLIPON FLANGE (MARKET QUALITY)
Size In mm
BS – 10 (1962) ANSI – B 16.5 IS – 6392
T/D T/E T/F T/H ASA 150# ASA 300# PN10 PN 16 PN - 40 ISS T/E
150 185.63
488.13
405.63(16mm)
324.50(14mm)
1017.50
653.13(20mm)
1237.50
1017.50(25mm)
728.75
495.00(20mm)
385.00(16mm)
1718.75
1237.50(25mm) 834.63 834.63 - 598.13(20mm)
200 440.00(12mm)
330.00(10mm)
715.00
584.38(16mm)
1452.00
941.88(20mm)
2117.50
1546.88(28mm)
1243.00
962.50(25mm)
818.13(22mm)
715.00(20mm)
3025.00
2612.50(36mm)
1876.88(25mm)
955.63 - - 749.38(20mm)
250 783.75(16mm)
632.50(12mm)
1203.13
962.50(20mm)
866.25(16mm)
2399.38
1787.50(25mm)
1271.88(20mm)
3004.38
2578.13(30mm)
1616.63
1237.50(25mm)
1045.00(22mm)
4331.25
2337.50(25mm) 1608.75 - -
1237.50(25mm)
1031.25(30mm)
893.75(26mm)
300 1306.25(20mm)
1003.75(16mm)
756.25(12mm)
1856.25(25mm)
1375.00(20mm)
3616.25
2825.63(25mm)
4765.75
3616.25(30mm)
2475.00(30mm)
1959.38(25mm)
1753.13(20mm)
7218.75 2021.25 - - 1553.75(30mm)
1168.75(16mm)
350 1650.00(20mm)
1299.38(16mm)
1072.50(12mm)
2208.25(25mm)
1650.00(20mm) 4867.50 -
3960.00
3093.75(32mm)
2736.25(25mm)
2165.63(20mm)
- 3114.38 - - 2344.38(20mm)
1890.63(16mm)
400 1856.25(20mm)
1430.00(16mm)
1168.75(12mm)
2612.50(25mm) 7779.75 -
5259.38
3712.50(30mm)
3093.75(25mm)
2612.50(20mm)
- 4380.75 - - 2509..38(20mm)
2310.00(16mm)
450 2378.75(20mm)
1993.75(16mm)
1581.25(12mm)
3540.63(25mm) 9693.75 -
6290.63
3987.50(30mm)
3526.88(25mm)
3025.00(20mm)
- - - - -
500 2935.63(20mm)
2564.38(16mm)
2028.13(12mm)
3891.25(25mm) 13234.38 -
8731.25
5568.75(30mm)
3994.38(25mm)
3437.50(20mm)
- 7493.75 - - -
600 3898.13(20mm)
3300.00(16mm)
2750.00(12mm)
5018.75(25mm) 18239.38 -
12203.13
6808.25(30mm)
5775.00(25mm)
- 10828.13 - - -
PRICES OF PN-16 & PN -40 ON REQUEST.
PRICES HIGHER SIZES UPTO 1800 NB ON REQUEST
THICKNESS & O.D OF FLANGES AS PER BOOK STD WITH UPTO APPROX -1 MM TOLERANCE
Page 13
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 13
M.S DUMMY FLANGE ( MARKET QUALITY)
Size in
N.B
BS- 10(1962) ANSI–B 16.5 IS – 6392
T/D T/E T/F T/H ASA 150 ASA 300 PN10 PN 16 PN - 40 ISS T/E
15 - 39.88 49.50 86.63
82.50 (12 mm) 46.75 85.25 85.25 85.25 - -
20 - 44.00 55.00 86.63
82.50 (12 mm) 63.25 123.75 101.75 101.75 - -
25 - 59.13 82.50 126.50
115.50 (13mm)
93.50
66.00 11 mm 173.25 130.63 130.63 - -
32 - 66.00 107.25 185.63
162.25(16mm)
123.75
111.38 14mm 206.25 171.88 171.88 - -
40 72.88 96.25 112.75 213.13
178.75(16mm)
167.75
141.63 16mm
123.75 14mm
242.00 202.13 202.13 - -
50 93.50 118.25
220.00
207.63 (14mm)
178.75 (12 mm)
288.75
240.63
199.38 16mm
149.88 12mm
336.88 295.63 295.63 - -
65 110.00 130.63 291.50
254.38 (14 mm) 350.63
378.13
343.75 20mm
272.25 16mm
499.13
426.25(20 mm) 385.00
-
-
- -
80 171.88 203.50 357.50
309.38 (14 mm)
550.00
440.00(20mm)
474.38
385.00 20mm
313.50 16mm
721.88
632.50(25 mm) 440.00 - - -
100 220.00
9 mm thick 233.75
522.50
452.38 (16 mm)
715.00
20 mm thick
694.38
543.13 20mm
446.88 16mm
1161.88
1031.25(28mm
907.50(25 mm)
530.75 - - -
125 302.50
11mm thick
556.88
13 mm thick
1024.38
838.75 (20 mm)
1271.88
1072.80( 25mm)
811.25
687.50 20mm
550.00 16mm
1603.25
1340.63(30mm 852.50 - - -
Page 14
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 14
M.S DUMMY FLANGE (MARKET QUALITY) Size
In mm
B.S – 10 (1962) ANSI – B 16.5 IS - 6392
T/D T/E T/F T/H ASA 150# ASA 300# PN -10 PN - 16 PN-40 T/E
150
316.25 11 mm
804.38
618.75(16 mm)
1216.88
1010.63 20 mm
1526.88
1278.75 25 mm
1024.38
804.38 20 mm
632.50 16mm
2131.25
1787.50 30 mm 1138.50 - - 907.50
200 742.50 12 mm
605.00 10 mm
1134.38
996.88 (16 mm)
1931.88 25 mm
1512.50 20mm
2805.00
2186.25 28 mm
1808.13
1581.25 25 mm
1375.00 22 mm
1278.75 20 mm
3712.50
3107.50 36 mm 1629.38 - -
1307.63 16 mm
1100.00 20mm
250 1416.25 16mm
1051.88 12 mm
1925.00
1760.00(20mm
1402.50 16 mm
3327.50
2681.25 25 mm
2172.50 20 mm
4008.13
2805.00
2200.00 25 mm
1760.00 20 mm
5981.25
4785.00 40 mm 2571.25 - -
5280.00 25mm
1835.63 20 mm
1560.63 16 mm
300
2406.25 20 mm
1821.88 16mm
1409.38 12mm
2956.25 25mm
- 20 mm
5087.50
3465.00 25 mm
2763.75 20 mm
6187.50
25 mm thick
4331.25
3300.00 25 mm
2585.00 20 mm
8662.50
6943.75 40 mm 3334.38 - -
2976.88 25 mm
2378.75 20 mm
2021.25 16 mm
350
3031.88 20mm
2461.25 16mm
1925.00 12 mm
3987.50 25 mm
-20 mm - -
6166.88
5266.25 32 mm
4111.25 25 mm
3231.25 20 mm
- 5115.00 - -
3987.50 25 mm
3196.88 20 mm
2715.63 16 mm
400
3815.63 20 mm
2970.00 16mm
2323.75 12 mm
4812.50
25 mm thick - -
8009.38
6462.50 30 mm
5156.25 25 mm
4056.25 20 mm
- - - -
4743.75 25 mm
3877.50 20 mm
3300.00 16 mm
450
4826.25 20mm
3712.50 16mm
2846.25 12mm
5912.50
25 mm thick - -
9528.75
6118.75 25 mm
4743.75 20 mm
- - - - -
500
5809.38 20mm
4578.75 16mm
3575.00 12 mm
7287.50
25 mm thick - -
3062.50
7308.13 25 mm
5637.50 20 mm
- 10642.50 - - -
600
7851.25 20 mm
4991.25 12 mm
6393.75 16 mm
9968.75
25 mm thick
-
-
19800.00
10140.63 25mm
-
15950.00
-
-
-
PRICES OF PN – 16 & PN – 10 ON REQUEST
PRICES HIGHER SIZES UPTO 1800 NB ON REQUEST
THICKNESS & O.D OF FLANGES AS PER BOOK STD WITH UPTO APPROX -1 MM TOLERANCE
Page 15
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 15
M.S THREADED FLANGE
1” 1 ½” 2” 2 ½ “ 3” 4” 5” 6”
Table D - - - - - 316.25 495.00 556.88
Table E 94.88 129.25 143.00 214.50 247.50 336.88 - -
G.I THREADED FLANGE
½” ¾” 1” 1 ¼ “ 1 ½” 2” 2 ½” 3” 4” 5” 6” 8”
Table D - - - - 129.25 165.00 188.38 262.63 347.88 576.13 649.00
1031.25
Table E 71.50 74.25 101.75 118.25 145.75 185.63 211.75 292.88 382.25 - -
-
Page 16
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 16
M.S LONG BEND
Size
ERW P/E SEAMLESS U BEND ISS ERW ISS Seamless Expansion
Bend G.I LONG BEND
‘B’ ‘C’ Ord sch 40# Sch.40 L/R Sch.40 S/R “C” SCH 40 SCH
80 SCH 40 ISS ERW B
15 – ½” 14.44 18.56 27.50 - 37.13 21.31 35.75 82.50 - 26.13
20– ¾” 20.63 24.75 39.88 - 49.50 34.38 55.00 100.38 - 38.50
25 – 1’ 26.13 37.81 56.38 - 71.50 52.25 67.38 118.25 1443.75 59.13
32–1¼ 41.25 59.13 86.33 - 107.25 83.88 105.88 247.50 - 86.63
40-1½ 50.88 74.25 122.38 - 138.88 111.38 151.25 275.00 2041.88 103.13
50–2” 101.75 129.25 181.50 199.38 171.88 162.25 244.75 349.25 3121.25 173.25
65–2½’ 167.75 214.50 412.50 529.38 446.88 258.50 464.75 731.50 4235.00 268.13
80 – 3’ 228.25 283.25 653.13 742.50 660.00 363.00 724.63 1072.50 6311.25 367.13
100-4’ 453.75 588.50 - 1251.25 1134.38 742.00 1361.25 2014.38 10491.25 706.75
125-5” 948.75 1237.50 - - - 1555.13 3231.25 4228.13 26400.00 1636.25
150-6” 948.75 R=3D
1198.13 - 4180.00 - 2131.25
4056.25
R=3D 2509.38
5746.88
R=3D 3987.50 31075.00
2193.13
200-8” 1856.25 2722.50 - - - R=3d
3324.75 5060.00 9731.25 -
-
250-10” 3575.00 4441.25 - - - 5170.00 9418.75 18187.50 - -
300-12” 4895.00 7040.00 - - - 7975.00 16225.20 27362.50 - -
350-14” 15125.00 17187.50 - - - 18975.00 - 42625.00 - -
400-16” - 23787.50 - - - - - - - -
Page 17
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 17
BUTT-WELD ELBOWS
Size
MM/Inch
ERW SEAMLESS ISS ERW C TVM PREMIUM 45 DEG G.I. ERW
‘B’ ‘C’ #40 ERW “C” SCH-40 SCH 80 ERW “C” SCH-40
“B”
(elect)
“C”
(Elect)
‘B’
(Hot Dip)
‘C’
(Hot Dip)
15- ½” 11.69 14.44 17.19 - 26.81 38.50 - - - 16.50 - 21.31
20- ¾’ 13.75 15.47 20.28 - 35.75 46.75 - - - 18.56 - 24.75
25-1’ 16.16 20.97 26.81 37.13 44.69 63.25 23.38 27.50 - 24.75 - 32.31
32 –1 ¼’ 24.75 33.00 39.88 - 86.63 - 35.75 38.50 - 39.60 - 49.50
40– 1½ 33.69 44.00 53.63 71.50 89.37 111.38 41.25 50.88 40.43 52.80 51.84 59.13
50 –2” 52.94 67.38 80.44 110.00 137.50 185.63 56.38 77.00 64.35 80.44 75.08 89.38
65-2 ½ 88.00 107.25 163.63 178.75 222.75 371.25 89.38 133.38 105.60 127.05 126.91 152.63
80-3” 123.75 148.50 239.25 250.25 385.00 510.13 126.50 187.00 150.15 178.20 169.81 203.50
100-4” 233.75 291.50 412.50 429.00 572.00 998.25 250.25 316.25 278.85 346.50 321.75 387.13
125-5” 371.25 460.63 749.38 715.00 1134.38 1633.50 398.75 584.38 445.50 544.50 500.50 599.50
150-6” 486.75 618.75 1127.50 948.75 1395.63 2227.50 508.75 859.38 594.00 742.50 643.50 804.38
200-8” 962.50
(4mm)
1155.00(4.
1278.75 2013.00 1718.75 2818.75 4752.00 1039.50 1595.00 1386.00 1548.25 1523.50 1688.50
250-10” 1595.00
(4mm)
1650(4.5m
1973.13 3671.00 2825.63 5362.50 9095.63 1581.25 3157.00 1996.50 2345.75 2458.50 2692.25
300-12” 2337.50
(4mm)
2475.00(4.
2887.50 5458.75 3902.25 8043.75 15778.14 2406.25 4310.63 2994.75 3444.38 3664.38 3898.00
350-14” 3172.50 4142.88 10862.50 5761.25 11412.50 24750.00 3465.00 6325.00 - - - -
400-16” 5706.25 6050.00 16775.00 9143.75 17875.00 42625.00 4908.75 8277.50 - - - -
450-18” - 9516.00 - 14437.50 48056.25 66275.00 - - - - - -
500-20” - 12925.00 - 19731.25 44178.75 - - - - - - -
Page 18
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 18
M.S REDUCER ERW
Size ERW
Size ERW
Size ERW
Conc. Ecc. Conc. Ecc. Conc. Ecc.
¾ “ x ½” 13.75 - 4” x 3” 121.00 242.00 12” x 10” 1072.50 2214.00
1’ x ¾ ‘ 17.19 - 4” x 2½” 127.88 256.00 12” x 8” 1430.00 2406.00
1” x ½ “ 17.88 - 4” x 2” 133.38 267.00 12” x 6” 1519.38 2654.00
1 ¼“ x 1” 20.63 - 4” x 1 ½” 171.88 344.00 12” x 5” 1711.88 2888.00
1¼” x ¾ “ 24.06 - 4” x 1 ¼” 187.00 374.00 12” x 4” 1864.50 3218.00
1¼“x ½ “ 28.88 - 4” x 1” 163.63 393.00 14” x 12” 2406.25 3273.00
1½ “ x 1¼” 24.75 - 5 “ x 4’ 184.25 369.00 14” x 10” 2591.88 3575.00
1½“ x 1 ” 26.13 - 5” x 3” 162.50 385.00 14” x 8” 2818.75 4043.00
1½“x ¾ “ 30.94 - 5” x 2 ½ “ 224.13 448.00 14” x 6” - -
1½“ x ½ “ 35.75 - 5” x 2” 259.88 520.00 16” x 14” 3623.00 5294.00
2” x 1 ½ “ 38.50 77.00 6” x 5” 243.38 481.00 16” x 12” 3898.00 5679.00
2” x 1¼ “ 41.25 83.00 6” x 4” 247.50 510.00 16” x 10” 4263.00 6256.00
2” x 1” 42.63 85.00 6” x 3” 264.00 550.00 16” x 8” 4744.00 6944.00
2” x ¾ ” 68.75 138.00 6” x 2 ½“ 330.00 639.00 18” X 16” 7308.00 10863.00
2” x ½ “ 75.63 151.00 6” x 2” 357.50 715.00 18” X 14” 7783.00 12031.00
2 ½ “x2” 55.00 110.00 8” X 6” 444.13 908.00 18” X 12” 8539.00 13750.00
2 ½”x1 ½” 57.75 116.00 8” x 5” 467.50 956.00 18”X 10” 9763.00 -
2 ½”x1 ¼” 63.25 127.00 8” x 4” 584.38 1040.00 20” X 18” 10450.00 15813.00
2 ½”x1” 79.75 160.00 8” x 3” 687.50 1121.00 20” X 16” 11413.00 18288.00
3” x 2 ½” 71.50 143.00 8” x 2 ½” 804.38 1609.00 20” X 14” 12719.00 20213.00
3” x 2” 74.25 148.50 10” x 8” 687.50 1444.00 20” x 12” 13839.00 23375.00
3” x 1 ½ ” 81.13 162.00 10” x 6” 770.00 1595.00
3” x 1 ¼” 111.38 223.00 10” x 5” 939.13 1774.00
3” x 1” 118.25 237.00 10” x 4” 1045.00 2228.00
Page 19
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 19
BUTT WELD REDUCERS CONCENTRIC & ECCENTRIC Seamless
FCS SCH-40 FCS SCH-80 Size
FCS SCH-40 FCS SCH-80 Size
FCS SCH-40 FCS SCH-80
Conc. Ecc. Conc. Ecc. Conc. Ecc. Conc. Ecc. Conc. Ecc. Conc. Ecc.
¾”x ½” 23.00 43.00 39.00 - 3” x 1 ½” 165.00 243.00 263.00 358.00 10” x 8” 1416.00 2372.00 3362.00 4263.00
1” x ¾” 25.00 43.00 39.00 55.00 3” x 1 ¼” 182.00 415.00 327.00 - 10” x 6” 1540.00 2805.00 3988.00 4971.00
1” x ½” 25.00 51.00 43.00 59.00 3” x 1” 197.00 454.00 349.00 - 10” x 5” 1705.00 3506.00 4488.00 -
1¼”x1” 30.00 67.30 51.00 - 4” x 3” 238.00 347.00 340.00 446.00 10”x4” 1925.00 3713.00 5053.00 -
1¼”x ¾” 44.00 74.00 62.00 77.00 4” x 2 ½” 246.00 358.00 369.00 495.00 12” x 10” 2076.00 3286.00 5603.00 5679.00
1¼”x½” 52.00 106.00 74.00 - 4” x 2” 268.00 393.00 422.00 572.00 12” x 8” 2475.00 4194.00 6291.00 7734.00
1½”x1¼” 44.00 62.00 74.00 - 4 x 1 ½” 300.00 623.00 485.00 - 12” x 6” 2819.00 5239.00
00
7466.00 -
1½” x 1” 50.00 74.00 84.00 98.00 4”x 1¼” 336.00 693.00 580.00 - 12” x 5” 3458.00 6215.00 - -
1½” x ¾” 58.00 89.00 95.00 106.00 5” x 4” 432.00 558.00 674.00 817.00 14” x 12” 5108.00 6353.00 - -
1½” x ½” 67.00 146.00 107.00 - 5” x 3” 448.00 729.00 803.00 - 14” x 10” 5844.00 - - -
2” x 1½” 66.00 100.00 102.00 122.00 5” x 2 ½” 492.00 832.00 925.00 - 14” x 8” 6958.00 - - -
2” x 1 ¼” 72.00 105.00 121.00 127.00 5” x 2 600.00 945.00 991.00 - 16”X14” 6497.00 - - -
2” x 1” 80.00 117.00 124.00 139.00 6” x 5” 518.00 712.00 842.00 1066.00 16”X12” 7239.00 - - -
2” x ¾” 87.00 135.00 149.00 165.00 6” x 4” 529.00 820.00 982.00 1258.00 16”X10” 8298.00 - - -
2” x ½” 99.00 149.00 168.00 - 6” x 3” 572.00 914.00 1122.00 -
2 ½” x 2” 120.00 183.00 186.00 213.00 6” x 2 ½” 619.00 1040.00 1251.00 -
2½”x1½” 132.00 187.00 204.00 252.00 6” x 2” 708.00 1136.00 1293.00 -
2½”x1¼” 140.00 309.00 243.00 - 8” x 6” 811.00 1217.00 1590.00 2035.00
2 ½” x 1” 158.00 415.00 256.00 - 8” x 5” 829.00 1306.00 1777.00 2324.00
3” x 2 ½” 144.00 213.00 223.00 289.00 8” x 4 893.00 1719.00 1856.00 -
3” x 2” 154.00 220.00 234.00 300.00 8” x 3” 1189.00 2200.00 2056.00 -
Page 20
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 20
BUTTWELD TEE Size
ERW ‘B’ ERW ‘C’
Seamless
Sch.40
Seamless
Sch.80
Size ERW R/
Tee
Seamless
Sch.40
R/Tee
Size ERW R/
Tee
Seamless
Sch.40
R/Tee
½” - 24.75 49.50 94.88 1” x ¾” 44.00 96.00 5” x 4” 626.00 1272.00
¾” - 28.88 55.00 111.38 1” x ½” 44.00 96.00 5” x 3” 626.00 1272.00
1” 37.81 39.88 78.38 137.50 11 /4” x 1” 70.00 135.00 5” x 2 ½” 626.00 1272.00
1 ¼” 52.25 64.63 111.38 225.50 1 ¼” x ¾” 70.00 135.00 5” x 2” 626.00 1272.00
1 ½” 64.63 78.38 137.50 269.50 1 ¼” x ½” 70.00 135.00 6” x 5” 791.00 1650.00
2” 93.50 118.25 178.75 397.38 1 ½” x 1 ¼” 85.00 158.00 6” x 4” 791.00 1650.00
2 ½” 151.25 182.88 336.88 653.13 1 ½” x 1” 85.00 158.00 6” x 3” 791.00 1650.00
3” 206.25 250.25 495.00 907.50 1 ½” x ¾” 85.00 158.00 6” x 2 ½” 791.00 1650.00
4” 323.13 401.50 701.25 1496.00 1 ½” x ½” 85.00 158.00 6” x 2” 791.00 1650.00
5” 495.00 591.25 1113.75 2990.63 2” x 1 ½” 124.00 213.00 8” x 6” 1623.00 2688.00
6” 632.50 756.25 1485.00 3740.00 2” x 1 ¼” 124.00 213.00 8” x 5” 1623.00 2688.00
8” 1313.13 1553.75 2557.50 6545.00 2” x 1” 124.00 213.00 8” x 4” 1623.00 2688.00
10” 2131.25 2413.13 4468.75 - 2” x ¾” 124.00 213.00 8” x 3” 1623.00 2688.00
12” 2516.25 2818.75 7012.50 - 2” x ½” 124.00 213.00 8” x 2 ½” 1623.00 2688.00
14” 4125.00 4826.25 10862.50 - 2 ½” x 2” 199.00 378.00 10” x 8” 2475.00 4950.00
16” - - 15125.00 - 2 ½” x 1 ½” 199.00 378.00 10” x 6” 2475.00 4950.00
18” 33000.00 - 2 ½” 1 ¼” 199.00 378.00 10” x 5” 2475.00 4950.00
20” 37400.00 - 2 ½” x 1” 199.00 378.00 10” x 4” 2475.00 4950.00
24” 63662.50 - 3” x 2 ½” 268.00 536.00 12” x 10” 2693.00 8113.00
3” x 2” 268.00 536.00 12” x 8” 2963.00 8113.00
3” x 1 ½ “ 268.00 536.00 12” x 6” 2963.00 8113.00
3” x 11 /4” 268.00 536.00 12” x 5” 2963.00 8113.00
3” x 1” 268.00 536.00 12” x 4” 2963.00 8113.00
4” x 3” 433.00 749.00
4” x 2 ½” 433.00 749.00
4” x 2” 433.00 749.00
4” x 1 ½” 433.00 749.00
4” x 1 ¼” 433.00 749.00
4” x 1” 433.00 749.00
Page 21
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 21
SEAMLESS SCH – 40 CARBON STEEL
B/W FITTINGS AS PER ASTM, - A 234-GR WPB
DIM ANSI – A- 16-9
FCS ASTM A 105 flanges as per ANSI –STD
Size SCH – 40 SCH – 80 Size SORF SORF SORF WNRF WNRF SWRF SWRF
In mm Cap Cap #150 # 300 # 600 #150 #300 #150 # 300
15 NB - - 15NB 69.00 124.00 186.00 227.00 89.00 138.00
20 NB - - 20NB 77.00 186.00 213.00 289.00 103.00 206.00
25 NB 44.00 55.00 25NB 92.00 245.00 254.00 364.00 124.00 261.00
32 NB 51.00 69.00 32NB 165.00 309.00 358.00 470.00 193.00 344.00
40 NB 55.00 76.00 40NB 173.00 392.00 323.00 584.00 206.00 452.00
50 NB 66.00 81.00 50NB 231.00 454.00 447.00 722.00 275.00 564.00
65 NB 102.00 144.00 65NB 433.00 701.00 715.00 1189.00 550.00 894.00
80 NB 117.00 184.00 80NB 495.00 914.00 736.00 1334.00 619.00 1073.00
100 NB 195.00 268.00 100NB 722.00 1513.00 1155.00 2131.00 928.00 1815.00
125 NB 371.00 693.00 125NB 949.00 2166.00 1815.00 3114.00 1203.00 2613.00
150 NB 468.00 1018.00 150NB 1086.00 2681.00 2097.00 4228.00 1444.00 3355.00
200 NB 715.00 1616.00 200NB 1702.00 4194.00 3025.00 6325.00 - -
250 NB 1513.00 3575.00 250NB 3025.00 6050.00 5445.00 8388.00 - -
300 NB 2200.00 5809.00 300NB 5294.00 9213.00 7150.00 12875.00 - -
350 NB 3988.00 10656.00 350NB 7081.00 - 10038.00 16775.00 - -
400 NB 5775.00 14534.00 400NB 8800.00 - 11413.00 22688.00 - -
450NB 8938.00 - 450NB 10863.00 - 14025.00 26813.00 - -
500 NB 12650.00 - 500NB 12925.00 - 17875.00 34513.00 - -
600 NB 21450.00 -
Page 22
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 22
M.S FORGED FITTINGS BSP SCREWED VS / EQUIVALENT ¼” 3/8” ½” ¾” 1” 1 ¼” 1 ½” 2” 2 ½” 3”
Elbow 24.96 32.52 44.69 69.58 106.63 223.85 297.86 554.33 1402.50 2187.63
Tee 37.13 45.38 64.28 91.51 145.20 298.38 391.88 698.50 2268.75 3547.50
Union 64.28 70.13 77.00 104.36 152.63 268.47 336.53 534.88 - -
Coupling 8.25 9.63 19.25 22.00 33.00 57.75 70.13 123.75 - -
Hex Nipple 9.28 10.31 15.81 23.03 32.52 61.88 70.13 132.00 - -
Cross 113.44 121.00 122.38 177.38 302.50 - - - - -
Cap 11.34 12.38 20.63 26.13 41.25 75.63 92.13 158.13 - -
Hose Collar 22.34 23.03 27.50 44.69 64.63 147.13 180.13 364.38 - -
Plug 5.50 6.88 7.91 12.38 22.69 35.75 45.38 77.00 - -
M/F Elbow 41.94 54.52 75.63 114.13 171.88 339.63 460.63 829.13 - -
FORGED STEEL FITTINGS SCREWED FITTINGS BSP (REDUCING) R / Elbow R / Tee R / Coupling R/ Hex Nipple R / Bush
3/8” x ¼” - - 8.94 11.00 8.25
½” x 3/8” - - 14.78 12.38 9.63
½” x ¼” - - 14.78 12.38 9.63
¾” x ½” 83.88 112.75 24.75 22.69 15.13
¾” x 3/8” - - 24.75 22.69 15.13
¾” x ¼” - - 24.75 22.69 15.13
1” x ¼” - - 45.72 45.38 26.13
1” x 3/8” - - 45.72 45.38 26.13
1” x ½” 126.50 171.88 45.72 45.38 26.13
1” x ¾” 126.50 171.88 45.72 45.38 26.13
1 ¼” x ½” 268.13 357.50 77.00 90.75 70.13
1 ¼”x ¾” 268.13 357.50 77.00 90.75 70.13
1 ¼ “ x 1” 268.13 357.50 77.00 90.75 70.13
1 ½” x ½” 357.50 478.50 93.50 114.13 79.75
1 ½” x ¾” 357.50 478.50 93.50 114.13 79.75
1 ½” x 1” 357.50 478.50 93.50 114.13 79.75
1 ½” x 1 ¼” 357.50 478.50 93.50 114.13 79.75
2” x ½” 665.50 841.50 163.63 229.63 163.63
2” x ¾” 665.50 841.50 163.63 229.63 163.63
2” x 1” 665.50 841.50 163.63 229.63 163.63
2” x 1¼” 665.50 841.50 163.63 229.63 163.63
2” x 1½” 665.50 841.50 163.63 229.63 163.63
Page 23
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 23
F.C.S FITTINGS CONFORM ASTM – 105 ANSI B 16.11 SOCKETWELD – 3000 LBS
¼” 3/8” ½” ¾” 1” 1 ¼” 1 ½” 2”
900 Elbow 50.33 55.00 50.88 77.00 122.38 232.38 308.00 566.50
Equal Tee 67.38 78.56 70.13 103.81 162.25 306.63 405.63 720.50
Union 116.88 116.88 126.50 215.88 323.13 572.00 690.25 990.00
Cap 22.00 28.88 41.25 66.00 82.50 156.75 192.50 297.00
Full Coupling 17.33 23.38 27.50 44.69 52.94 105.88 130.63 206.25
Half Coupling 17.33 23.38 27.50 44.69 52.94 105.88 130.63 206.25
FORGED STEEL FITTINGS / SOCKET WELD FITTINGS (REDUCING)
Reducing Elbow S/W Reducing Tee S/W Reducing Coupling S/W
1” x ¾” 134.61 178.75 60.50
1” x ½” 134.61 178.75 60.50
1 ¼” x 1” 255.61 334.13 122.38
1 ¼” x ¾” 255.61 334.13 122.38
1 ¼” x ½” 255.61 334.13 122.38
1 ½” x 1¼” 338.94 446.88 149.88
1 ½” x 1” 338.94 446.88 149.88
1 ½” x ¾” 338.94 446.88 149.88
1 ½” x ½” 338.94 446.88 149.88
2” x 1 ½” 623.15 792.00 237.19
2” x 1 ¼” 623.15 792.00 237.19
2” x 1” 623.15 792.00 237.19
2” x ¾” 623.15 792.00 237.19
2” x ½” 623.15 792.00 237.19
Page 24
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 24
F.C.S A 105 FITTING NPT THREADED 3000 LBS PARTICULARS ¼” 3/8” ½” ¾” 1” 1 ¼” 1 ½” 2” 2 ½” 3”
Elbow S/E. 102.63 108.63 108.63 144.38 251.63 306.63 522.50 702.63 1710.50 3051.13
EQ. & UnequalTee 144.38 144.38 144.38 207.63 316.25 449.63 629.75 809.88 2700.50 3961.38
FullCoupling 57.75 57.75 57.75 75.63 108.63 180.13 236.50 306.63 585.75 809.88
HalfCoupling 35.75 37.13 37.13 52.25 77.00 116.88 126.50 217.25 496.38 649.00
Union 180.13 180.13 180.13 262.63 342.38 540.38 649.00 900.63 2161.50 3151.50
Hex Plug 31.63 31.63 31.63 46.75 70.13 163.63 193.88 265.38 - -
Hex Nipple 74.25 74.25 77.00 99.00 160.88 269.50 346.50 477.13 - -
Cap - - 38.50 59.13 85.25 180.13 214.50 320.38 - -
Sockolet/weldolet/
Threadolet
Size MM/ Inch CAST STEEL SCREWED FITTINGS Elbow Tee Union Plug Hex Nipple Cross
15–½” - - - 6.05 - -
20 ¾” - - - 11.00 - -
25-1” - - - 17.19 - -
32-1¼” - - 209.00 28.19 - -
40-1½” - - 283.25 37.13 - -
50–2” - - 387.75 52.25 - -
65-2½” 415.25 573.38 673.75 94.19 141.63 -
80- 3” 616.00 790.63 1122.00 130.63 173.25 -
100-4” 1112.38 1424.50 2074.88 240.63 283.25 -
125-5” - - - - - -
150–6” - - - - - -
CAST STEEL BUSH S/E 1 ½”x1 ¼” - 2 ½”x1 ½” 171.88 3” x 1 ½” 213.13 4” x 1 ½:” -
1 ½” x 1”, ¾” - 2 ½” x 1 ¼” - 3” x 1 ¼ - 4” x 1” -
2” x 1 ½” - 2 ½” x 1” - 4” x 3” 354.75 5” x 4”,3” -
2” x 1 ¼ ”,1” - 3” x 2 ½” 202.13 4” x 2 ½” 354.75 6” x 5”,4” ,3” -
2 ½”x2” 159.50 3” x 2” 209.00 4” x 2” 379.50
Page 25
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 25
MS Pipe Nipple (Medium) MS PIPE NIPPLE ‘C’ CLASS HEAVY SEAMLESS PIPE NIPPLE SCH 40# Size 4” 6” 9” 12” Size 4” 6” 9” 12” Size 6” 9” 12” ¼” 11.00 17.00 25.00 33.00 ¼” 15.00 22.00 33.00 44.00 ¼” 73.00 109.00 146.00
3/8” 11.00 17.00 25.00 33.00 3/8” 15.00 22.00 33.00 44.00 3/8” 73.00 109.00 146.00
½” 10.00 14.00 22.00 29.00 ½” 15.00 23.00 34.00 45.00 ½” 69.00 103.00 138.00
¾” 12.00 19.00 28.00 37.00 ¾” 21.00 31.00 47.00 62.00 ¾” 83.00 124.00 165.00
1” 18.00 26.00 39.00 52.00 1” 30.00 45.00 68.00 91.00 1” 122.00 184.00 245.00
1 ¼” 23.00 34.00 51.00 67.00 1 ¼” 36.00 55.00 83.00 109.00 1 ¼” 175.00 262.00 349.00
1 ½” 27.00 40.00 60.00 80.00 1 ½” 45.00 68.00 102.00 136.00 1 ½” 215.00 322.00 429.00
2” 40.00 58.00 88.00 117.00 2” 59.00 88.00 132.00 176.00 2” 311.00 466.00 622.00
2 ½” 54.00 80.00 120.00 160.00 2 ½” 80.00 120.00 179.00 239.00 2 ½” - - -
3” 65.00 96.00 144.00 193.00 3” 91.00 136.00 205.00 271.00 3” - - -
4” 91.00 135.00 201.00 268.00 4” 146.00 219.00 329.00 437.00 4” - - -
5” - 234.00 351.00 468.00
6” - 275.00 413.00 550.00
M.S STEEL BUSH S/E
1 ½”x1 ¼” - 2 ½”x1 ½” 299.75 3” x 1 ½” 492.25
1 ½” x 1”, ¾” - 2 ½” x 1 ¼” - 3” x 1 ¼” -
2” x 1 ½” - 2 ½” x 1” 331.38 4” x 3” 459.25
2” x 1 ¼ ”,1” - 3” x 2 ½” 391.88 4” x 2 ½” 506.00
2 ½”x2” 269.50 3” x 2” 438.63 4” x 2” 540.38
Size MM/ Inch M.S STEEL SCREWED FITTINGS Coupling Elbow Tees Hex Nipple Cap
40-1½” 59.13 251.63 327.25 - -
50–2” 72.88 309.38 449.63 - -
65-2½” 110.00 551.38 746.63 262.63 200.75
80- 3” 134.75 720.50 907.50 382.25 269.50
100-4” 185.63 1039.50 1377.75 624.25 O.R
125-5” 276.38 - OR 991..38 O.R
150–6” 360.25 - OR 1302.13 O.R
200-8” 671.00 - OR - O.R
Page 26
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 26
G.I PIPE NIPPLES(NEW PIPES) ‘B’ CLASS
Size ½” ¾” 1” 1 ¼” 1 ½” 2” 2 ½”’A’ 3”’A” 4”’A”
3” Long 10.00 12.00 17.00 23.00 28.00 36.00 52.00 59.00 83.00
4” Long 13.00 17.00 23.00 32.00 36.00 49.00 69.00 78.00 109.00
6” Long 20.00 24.00 34.00 47.00 54.00 73.00 103.00 118.00 164.00
9” Long 30.00 36.00 52.00 70.00 82.00 109.00 155.00 177.00 246.00
12” Long 40.00 48.00 69.00 94.00 109.00 146.00 206.00 237.00 327.00
G.I U Clamp
Size 8 mm 10 mm 12 mm 16 mm M.S BOLT NUTS ½” 10.00 - - - Size / length 1 ½”
long
2” long 2 ½:”
long
3” long 3 ½”
long
4” long 5”
long
6” long
¾” 11.00 - - - ½” 12.65 14.03 15.81 16.91 18.70 19.87 - -
1” 12.00 - - - 5/8” 21.66 24.06 26.26 28.72 30.94 33.34 38.02 -
1 ¼” 13.00 - - - ¾” - 37.40 40.91 43.86 47.92 51.43 57.27 65.45
1 ½” 14.00 26.00 - - 7/8”
2” 16.00 28.00 - - G.I BOLT NUTS 2 ½” 20.00 32.00 - - Size / length 1 ½”
long
2” long 2 ½:”
long
3” long 3 ½”
long
4” long 5”
long
6” long
3” 22.00 34.00 - - ½” 14.00 15.50 17.00 19.00 21.00 22.00 - -
4” 25.50 36.00 - - 5/8” 24.00 26.50 29.000 32.00 34.00 37.00 42.00 -
5” 31.00 46.00 88.00 - ¾” - 41.00 45.00 48.00 53.00 57.00 63.00 72.00
6” 36.00 54.00 104.00 - 7/8”
8” - - 112.00 -
10” - - 140.00 -
12” - - 210.00 -
Page 27
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 27
G.I ISI FITTINGS ½” ¾” 1” 1 ¼” 1 ½” 2” 2 ½” 3” 4” 5” 6”
Elbow 14.09 22.00 33.00 49.50 70.13 103.13 196.63 262.63 468.88 1553.75 1890.63
Tee 21.45 32.31 44.69 64.63 86.63 133.38 247.50 356.13 598.13 2117.50 2440.63
Coupling 13.06 18.84 23.38 37.13 44.69 77.00 125.13 184.25 297.00 - -
Union 37.13 50.88 70.13 104.50 123.75 191.13 357.50 495.00 698.50 - -
Hex Nipple 14.09 21.31 30.94 49.50 61.88 92.13 173.25 257.13 471.63 - -
¾” x ½” 1” x ¾” 1” x ½” 1¼” x 1” 1¼” x ¾” 1¼” x ½” 1½”x 1¼” 1½” x 1” 1½” x ¾” 1½” x ½” 2”x 1½”
R / Elbow 24.20 36.44 36.44 54.31 54.31 54.31 77.00 77.00 77.00 77.00 114.13
R / Tee 35.75 49.50 49.50 71.50 71.50 71.50 95.56 95.56 95.56 95.56 147.13
R/Coupling 20.63 26.13 26.13 41.25 41.25 41.25 49.50 49.50 49.50 49.50 83.88
2” x 1¼” 2” x 1” 2” x ¾” 2” x ½”
R / Elbow 114.13 114.13 114.13 114.13
R / Tee 147.13 147.13 147.13 147.13
R/Coupling 83.88 83.88 83.88 83.88
G.I ‘R’ Brand Fittings ½” ¾” 1” 1 ¼” 1 ½” 2” 2 ½” 3” 4” 5” 6”
Elbow 20.90 33.00 57.06 85.04 114.13 178.20 303.88 468.88 800.25 - 2575.38
Tee 32.50 52.94 78.38 111.79 152.63 243.38 539.34 952.88 1894.75 - -
Coupling 18.98 28.46 40.56 58.03 73.31 117.91 206.46 290.13 501.88 - 1728.38
Union 57.41 88.41 123.75 180.13 221.38 338.59 859.38 937.75 1265.00 - -
Hex Nipple 21.38 33.69 55.00 82.91 105.88 150.22 273.63 392.70 542.09 - -
¾” x ½” 1” x ¾” 1” x ½” 1¼” x 1” 1¼” x ¾” 1¼” x ½” 1½”x 1¼” 1½” x 1” 1½” x ¾” 1½” x ½” 2”x 1½”
R / Elbow 36.09 62.08 62.08 94.33 94.33 94.33 126.78 126.78 126.78 126.78 196.08
R / Tee 57.75 85.59 85.59 123.75 123.75 123.75 167.75 167.75 167.75 167.75 268.13
R/Coupling 31.28 44.00 44.00 44.00 44.00 44.00 64.49 64.49 64.49 64.49 84.56
2” x 1¼” 2” x 1” 2” x ¾” 2” x ½”
R / Elbow 196.08 196.08 196.08 196.08
R / Tee 268.13 268.13 268.13 268.13
R/Coupling 84.56 84.56 84.56 -
Page 28
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 28
C.S. FITTINGS – FLANGE – BEND WITH IBR TEST CERTIFICATE IN FORM – III C
Size in mm FLANGES Blind Flange LONG BENG ELBOW EXPANSION
BW TEE
SCH – 40
CAP
SCH-40
T/H ND 40 ASA–150 ASA-300 Table H ASA-150 SCH-40 SCH-80 SCH-40 SCH-80 SCH-40
15 MM 158.00 195.00 98.00 213.00 190.00 110.00 69.00 48.00 72.00 - -
20 MM 162.00 256.00 138.00 268.00 190.00 149.00 92.00 51.00 83.00 - -
25 MM 212.00 286.00 179.00 309.00 259.00 198.00 133.00 66.00 89.00 2509.00 -
32 MM 298.00 429.00 257.00 452.00 358.00 281.00 239.00 106.00 154.00 - -
40 MM 330.00 481.00 296.00 516.00 395.00 297.00 279.00 131.00 172.00 3609.00 -
50MM 473.00 616.00 393.00 667.00 602.00 443.00 429.00 190.00 322.00 4606.00 234.00
65 MM 582.00 825.00 605.00 928.00 774.00 742.00 844.00 385.00 463.00 6779.00 308.00
80 MM 815.00 1056.00 715.00 1134.00 1084.00 894.00 1273.00 561.00 832.00 10175.00 340.00
100 MM 1093.00 1392.00 1009.00 1845.00 1528.00 1353.00 2049.00 963.00 1533.00 17531.00 465.00
125 MM 1763.00 1911.00 1238.00 2530.00 2509.00 1733.00 4854.00 1686.00 2746.00 38638.00 781.00
150 MM 2005.00 2461.00 1409.00 3059.00 2956.00 2097.00 5754.00 2357.00 3860.00 51288.00 1139.00
200 MM 3114.00 4558.00 2289.00 5404.00 4799.00 3664.00 - 4971.00 7803.00 - 1902.00
250 MM 4599.00 4971.00 3156.00 7274.00 7443.00 5500.00 - 8209.00 14850.00
00
- 4978.00
300 MM 6758.00 9653.00 4881.00 11241.00 11344.00 8078.00 - 12650.0 23238.00 - 7322.00
Particular SE FITTINGS WITH IBR TC
Particular SW FITTINGS IN IBR TC
15 MM 20MM 25MM 32MM 40MM 50MM 15 MM 20MM 25MM 32MM 40MM 50MM
Elbow 197.00 245.00 391.00 536.00 891.00 1196.00 Elbow 135.00 176.00 220.00 366.00 476.00 806.00
Tee 245.00 330.00 513.00 744.00 1074.00 Tee 179.00 220.00 344.00 501.00 660.00 1012.00
Coupling 110.00 135.00 197.00 318.00 413.00 672.00 Coupling 83.00 96.00 136.00 191.00 260.00 484.00
Union 413.00 516.00 660.00 1108.00 1393.00 1832.00 Union 425.00 529.00 694.00 1169.00 1467.00 1929.00
H / Nipple 165.00 179.00 261.00 440.00 660.00 894.00
Plug 87.00 95.00 129.00 243.00 371.00 472.00
Page 29
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 29
C.S REDUCERS WITH IBR IN FORM – III C
Size Sch40 Conc Sch 40 Eccn Size Sch40 Conc Sch 40 Eccn Size Sch40 Conc Sch 40 Eccn
¾”x ½” 89.00 107.00 2 ½” x 2” 323.00 371.00 5” x 4” 876.00 983.00
1” x ¾” 107.00 125.00 2½”x1½” 375.00 413.00 5” x 3” 1001.00 1162.00
1” x ½” 144.00 179.00 2½”x1¼” 447.00 536.00 5” x 2 ½” 1128.00 1361.00
1¼”x1” 161.00 2½”x1” 518.00 646.00 5” x 2 1306.00 1788.00
1¼”x ¾” 197.00 234.00 3” x 2 ½” 358.00 393.00 6” x 5” 1141.00 1327.00
1¼”x½” 250.00 3” x 2” 413.00 484.00 6” x 4” 1251.00 1430.00
1½”x1¼” 161.00 215.00 3” x 1 ½” 465.00 626.00 6” x 3” 1359.00 1788.00
1½” x 1” 197.00 289.00 3” x 1 ¼” 536.00 751.00 6” x 2 ½” 1609.00 1966.00
1½” x ¾” 250.00 380.00 3” x 1” 644.00 859.00 6” x 2” 1788.00 2338.00
1½” x ½” 286.00 234.00 4” x 3” 518.00 612.00 8” x 6” 1856.00 2145.00
2” x 1½” 215.00 286.00 4” x 2 ½” 591.00 722.00 8” x 5” 2145.00 2475.00
2” x 1 ¼” 250.00 340.00 4” x 2” 681.00 859.00 8” x 4” 2434.00 2860.00
2” x 1” 286.00 413.00 4 x 1 ½” 769.00 1018.00 8” x 3” 3163.00 4469.00
2” x ¾” 340.00 502.00 4”x 1¼”,1” - -
2” x ½” 426.00
Page 30
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 30
Ball Valves
Particulars Make ¼ & 3/8” ½” ¾” 1” 1 ¼” 1 ½” 2” 2 ½” 3” 4”
5” 6”
C.I Ball Valve S/E Bajpai - 180.13 224.13 264.00 412.50 547.25 823.63 1303.50 2013.00 3679.50 - -
C.I Ball Valve F/E S.pcs Bajpai
C.I Ball Valve F/E 3.pcs Bajpai - 559.63 643.50 767.25 1146.75 1196.25 1724.25 2681.25 3429.25 5311.63 11338.25 13488.75
SS.202 Ball Valve B/S S/E Bajpai 275.00 275.00 371.25 519.75 833.25 1100.00 1914.00 3819.75 4688.75 9281.25 - -
S.S 304 Ball Valve(I/C)304 S/E Local
G.M Ball valve Imported S/E Matrix
/Piero 169.13 214.50 310.75 460.63 742.50 1113.75 1617.00 3437.50 4510.00 6919.00 - -
G.M Gate Valve ISI S/E “R” brand - 418.00 561.00 830.50 1240.25 1691.25 2502.50 4655.75 6924.50 13605.63 - -
G.M. Ball Valves S/E R” brand - 431.75 563.75 827.75 1500.13 2250.88 3939.38 - - - - -
BALL VALVES (FLOWJET)
¼” 3/8” ½” ¾” 1” 1 ¼” 1 ½” 2” 2 ½” 3” 4”
SC
RE
WE
D E
ND
SIN
GLE
PIE
CE
DE
SIG
N
CAST IRON FULL BORE - - 361.63 464.75 592.63 1134.38 1211.38 1830.13 2733.50 3506.25 6033.50
S.S 304 CF8 (I/C) FULL BORE 506.00 506.00 506.00 680.83 979.00 1753.13 1959.38 3119.88 - - -
S.S 316 CF8M (I/C) FULL BORE 588.50 588.50 588.50 804.38 1211.38 2765.63 2398.00 3918.75 - - -
S.S 304 3 WAY S\E - - 1802.63 2351.25 3605.25 5434.00 8098.75 14003.00 - - -
3 P
CS
DE
SIG
N S.S 304 CF8 (I/C) S/E OR S/W - - 1057.38 1237.50 1727.00 2681.25 2887.50 4021.88 8096.00 9900.00 19593.75
S.S 316CF8 (I/C) S/E OR S/W - - 1222.03 1340.363 1933.59 3196.88 3300.00 4640.63 9740.50 11859.88 25939.38
F.C.S A 105 S/E OR S/W 928.13 928.13 877.25 928.13 1237.50 2321.00 2321.00 2939.75 - - -
Page 31
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 31
BALL VALVE FLANGED END FLOWJET MAKE
½” ¾” 1” 1 ¼” 1 ½” 2” 2 ½” 3” 4” 5” 6” 8” 10”
F/E
TO
AS
A 1
50
3 P
CS
DE
SIG
N
CAST IRON 851.13 1057.88 1443.79 1908.50 2191.75 3146.00 4796.00 5852.00 8765.63 17160.00 23430.00 47994.38 79096.88
CAST STEEL (I/C) 1314.50 1531.75 2011.63 3249.13 3352.25 4537.50 6755.38 8302.25 13664.75 22522.50 31102.50 70248.75 127895.63
S.S 304 CF8 (I/C) 1755.88 2085.88 2747.25 3968.25 4876.00 7173.88 10429.35 13481.88 21867.00 44996.88 51349.38 108521.88 163625.00
S.S 316 CF8M (I/C) 2085.88 2468.13 3256.00 4985.75 5596.25 8573.13 12464.38 16025.63 25437.50 58781.25 61132.50 129696.88 252511.88
Note :- class 300 lbs, 600 lbs , Fire safe , Jacketted Valves , Higher Sizes , Actuator operated are on request.
C.I Butterfly Valve
Particulars Make 1” 1 ¼” 1 ½” 2” 2 ½” 3” 4” 5” 6” 8” 10” 12” 14”
Bajpai 484.300 - 536.25 598.13 695.75 844.25 1082.13 1337.88 1523.50 2377.38 4970.63 7060.63 -
Nitrile Moulded Sleeve S.G Iron
Disc/SS 410 spindle(BLACK) Flowjet 1005.13 - 1005.13 1263.63 1469.88 1908.50 2429.13 3042.88 3867.00 6113.25 9660.25 18287.50 -
-DO- EPDM lining 304 working
parts Flowjet - - 1160.50 1417.63 1702.25 2165.63 2939.75 3995.75 5259.38 9528.75 14293.13 24880.63 -
AUDCO - - - 2554.75 2770.63 3165.25 3980.63 4596.63 5813.50 10917.50 14102.00 18785.25 -
Page 32
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 32
Cast Steel Valves Non IBR “CREST” Make
Particulars ½” ¾” 1” 1 ½” 2” 2 ½” 3” 4” 5” 6”
8”
Globe Valve ND 40# /ASA 150
lbs 1959.38 1959.38 2096.88 2688.13 3225.75 5053.13 5786.00 8017.63 13729.38 16623.75 34650.00
Gate Valve - - 2722.50 3196.88 3691.88 5053.13 5930.38 8694.13 14049.75 17958.88 31680.00
N.R.V Lift type - - 1738.00 2424.13 2934.25 4331.25 5259.38 6873.63 11352.00 14451.00 29315.00
Swing check valve - - 1820.50 2578.13 3084.13 4610.38 5559.13 7610.63 14049.79 14870.63 26675.00
Y Stainer - - 1408.00 2021.25 2197.25 3862.38 4145.63 6301.63 11797.50 12870.00 -
CAST STEEL VALVES NON I.B.R “FLOWJET” MAKE
1” 1 ½” 2” 2 ½” 3” 4” 5” 6” 8” 10” 12”
Gate Valves
Class
150# 5827.25 6136.63 7321.88 10571.00 12116.50 18305.38 24234.38 28875.00 46321.00 69613.50 90894.38
Class
300# - 10164.00 13605.63 16410.63 20116.25 26734.00 - 48702.50 69712.50 - -
Globe Valves
Class
150# 4228.13 5568.75 7064.75 8353.13 10415.63 15468.75 25300.00 31714.38 52016.25 75611.25 112612.50
Class
300# 6897.00 8834.38 11233.71 16720.20 20116.25 28187.50 52016.25 55233.75 85250.00 132990.00 -
Swing Check
Valves
Class
150# 3558.50 4383.50 5414.75 7166.50 8714.75 13406.25 19078.13 21140.63 35578.13 62741.25 98133.75
Class
300# 6270.00 10084.25 10711.25 14891.25 17765.00 28215.00 50943.79 - - - -
Y Strainer Class
150# 2527.25 2939.75 3841.75 5724.13 7321.88 10312.50 14953.13 22171.88 34856.25 - -
Page 33
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 33
C.I SLUICE VALVES
PARTICULARS 1” 1 ½” 2” 2 ½” 3” 4” 5” 6” 8” 10” 12”
F/E TO T/D POPULAR /PILOT 1787.50 1904.38 2351.25 2633.13 3643.75 4943.13 6991.38 8263.75 13509.38 21230.00 25348.13
F/E TO ISS DEEPAK/AARKO ISI
F/E TO ISS KOLEY/DIVINE - 3334.38 3334.38 3836.25 4633.75 6256.25 7645.00 9590.63 15853.75 25203.75 33330.00
C.I NRV –(REFLEUX VALVE)
PARTICULARS 1 ½” 2” 2 ½” 3” 4” 5” 6” 8” 10” 12”
F/E TO ISS POPULAR / DIVINE 2296.25 2660.53 3203.75 3850.00 5218.15 6483.13 8442.50 13619.38 26262.50 33330.00
F/E TO #150 DEEPAK /AARKO
C.I ‘Y’ STAINER
PARTICULARS ½” ¾” 1” 1 ¼” 1 ½” 2” 2 ½” 3” 4” 5” 6” 8” 10” 12”
CREST / VALSON / EQUIP
F/E - - 935.00 - 1234.75 1397.00 2178.00 2359.50 3584.63 5626.50 7986.00 11797.50 24420.00 42274.38
FLOWJET - - - - -
C.I ‘T’ POT STAINER
PARTICULARS 1 ½” 2” 2 ½” 3” 4” 5” 6” 8” 10” 12”
F/E TO T/D AARKO / VALSON 1683.00 2197.25 2851.75 3338.50 4301.00 6545.00 8277.50 14148.75 29298.50 43283.63
C.I FOOT VALVES
PARTICULARS 2” 2 ½” 3” 4” 5” 6” 8” 10” 12”
LIFT TYPE F/E DIVINE 2956.25 3643.75 4702.50 5252.50 7156.88 8566.25 15661.25 23601.88 29658.75
Swing Type F/E V V Make 2578.13 2818.75 3093.75 3575.00 4331.25 6187.50 - - -
Page 34
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 34
S.S NEEDLE VALVES S/E
PARTICULARS ¼” 3/8” ½” ¾” 1” 1 ¼” 1 ½” 2”
BARSTOCK BAJPAI 202
barstock 215.88 215.88 236.50 361.63 - - - -
BARSTOCK Flowjet 304 272.25 283.25 272.25 500.50 577.50 1546.88 1805.38 2424.13
BARSTOCK Flowjet 316 618.75 618.75 721.88 1237.50 1908.50 3042.88 5208.50 6961.63
C.I DIAPHRAGM VALVE
Particulars ¾” 1” 1 ¼” 1 ½” 2” 2 ½” 3” 4” 5” 6”
F/E Unlined BSCO 852.50 990.00 1248.50 1409.38 1973.13 2660.63 3217.00 4900.00 8043.00 10848.90
F/E Rubber Lined BSCO 1003.75 1106.88 1423.13 1560.63 2175.25 2895.75 3671.20 5568.75 8765.63 11550.00
Spare Diaphragm Natural 45.38 72.88 96.25 111.38 134.75 192.50 240.63 288.75 574.75 845.63
F/E Ebonite lined BSCO 1402.50 1601.88 2090.00 2557.50 3162.50 4159.38 5328.13 7459.38 11618.75 15125.00
G.M VALVES (STEAM LINE) ATAM MAKE ½” ¾” 1” 1¼” 1½” 2”
GLOBE VALVES NO 9 S/E ATAM 1024.38 1606.00 2135.38 3011.25 4706.63 7642.25
GLOBE VALVE TO T/F F/E ATAM 2674.38 3361.88 5134.25 6100.88 9451.75 14289.00
NONRETURN VALVE S/E (AV 27 ) ATAM 642.13 896.50 1480.88 2046.00 3209.25 5016.00
SAFETY VALVES STRAIGHT S/E ATAM 665.50 970.75 1513.88 2230.25 2752.75 4042.50
SAFETY VALVE ANGLE S/E ATAM 871.75 1238.88 1758.63 2634.50 3360.50 4646.13
STEAM TRAP S/E ATAM
Y STAINER S/E ATAM 642.13 896.50 1480.88 2046.00 3209.25 5016.00
GLAND PACKED GUAGE GLASS COCK SET S/E ATAM 2481.88 4339.50 - - - -
GLAND PACKED GUAGE GLASS COCK SET F/E ATAM 3987.50 6113.25 - - - -
SIGHT GLASS S/E ATAM 932.25 1680.25 2022.63 - 3608.00 -
NON RETURN VALVE 818.13 1292.50 1931.88 2898.00 - -
FOOT VALVE 500.50 539.00 793.33 1053.25 1647.00 2481.00
Page 35
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 35
C.I GLAND COCK/ TAPER PLUG VALVES
½” ¾” 1” 1 ½” 2” 2 ½” 3” 4” 5” 6”
S/E CAST IRON 2 WAY DIVINE - - - 1485.00 1547.00 - - - - -
Gland cock
T/D F/E CAST IRON 2 WAY DIVINE - - - 1675.00 1950.00 - 3090.00 - - -
F/E CAST IRON 3 WAY DIVINE - - - - 2930.00 - 4678.00 - - -
TAPER PLUG
VALVE F/E CAST IRON SELF
LUBRICATED CLASS 125 FLOWJET 1482.00 1694.00 2277.00 3334.00 4447.00 6511.00 7359.00 13234.00 - 24888.00
Note:- Prices of S.S Barstock valves , Pinch Valves, Jacketed & Fire Safe Valves , Gear Operated , Safety Valves are on request.
SIDE FLOW INDICATOR “FLOWJET” MAKE
1” 1 ½” 2” 2 ½” 3” 4”
M.S IN LINE 1529.00 1881.00 2403.00 4310.63 5146.63 7453.88
SS 304# (I/C) 1905.75 2435.13 3228.50 4500.38 5505.50 7920.00
F.C.S A 105 VALVES S/E OR S/W NON I.B.R “FLOWJET” MAKE
½” ¾” 1” 1 ½” 2”
GATE VALVES
Non IBR
NON IBR
1520.75 1702.25 2216.50 4796.00 6239.75
I.B.R 1777.00 1986.00 2613.00 5591.00 7263.00
GLOBE VALVES
Non IBR
NON IBR
1469.88 1676.13 2165.63 4383.50 5621.00
I.B.R 1724.00 1986.00 2508.00 5068.00 6531.00
CHECK VALVES
Non IBR
NON IBR
1237.50 1417.63 1908.50 3558.50 4640.63
I.B.R 1437.00 1620.00 2221.00 4180.00 5643.00
SS 420 STEAM TRAPS THERMODYNAMIC “FLOWJET” MAKE
½” ¾” 1”
NON I.B.R 1263.63 1392.88 1959.38
Page 36
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 36
CHECK VALVES “FLOWJET” MAKE
1 ½” 2” 2 ½” 3” 4” 5” 6” 8” 10” 12”
M.S WAFER CHECK VALVE 644.88 671.00 851.13 1031.25 1392.88 2139.50 2552.00 4611.75 6435.00 11529.38
C.I DUAL PLATE CHECK VALVE
(10 KG / CM2)
- 2217.88 2475.00 2990.63 4383.50 5414.75 7012.50 13406.25 20377.50 30566.25
½” ¾” 1” 1½” 2” 2½” 3” 4”
S.S 304 NON SLAM CHECK
VALVE
412.50 495.00 605.00 1237.50 1650.00 2165.00 2527.25 3352.29
NOTE:- 316 check valves on request
Y STRAINERS “FLOWJET/VALSON” MAKE
½” ¾” 1” 1¼” 1½” 2” 2 ½” 3” 4” 5” 6” 8” 10” 12”
C.I BODY SS 304 MESH VALSON
T/E
S/E 330.00 412.50 495.00 715.00 770.00 990.00 1595.00 2090.00 3646.50 - - - - -
“Y” F/E - - 935.00 - 1234.75 1397.00 2178.00 2359.50 3584.63 5626.50 7986.00 11797.50 24420.00 42274.38
“T” F/E /
T/D - - - - 1683.00 2197.25 2851.75 3338.50 4301.00 6545.00 8277.50 14148.75 29298.50 43283.63
SS 304 BODY SS 304 MESH S/E 489.50 567.88 1237.50 - 2475.00 3558.50 - - - - - - - -
Note:- C.S , S.S , M.S “T” type Fabricated Higher Sizes are on request.
C.I. PULP VALVES WITH SS PLATE
Particulars 2” 2 ½” 3” 4” 5” 6” 8” 10” 12” 14” 16”
Bajpai 2538.25 - 3146.00 3774.38 4637.88 6166.88 - - - - -
VV Make 2682.00 3288.00 3420.00 4038.00 5466.00 6084.00 11808.00 17280.00 25518.00 48150.00 65145.00
Page 37
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 37
WATER METERS KRANTI / KUSHAL Size / Desc Bulk Enclosed type (metallic gears) Hot water / oil Bulk Enclosed type (
Petrol/ Diesel / Kerosene)
Woltman type class B (magnetic
drive)
Turbine Flow Meter Kushal
½” - - 52534.00 55925.00
¾” - - 55999.00 64005.00
1” - - 61176.00 66525.00
1 ½” 6140.00 10956.00 66256.00 69675.00
2” 6140.00 10700.00 78778.00 74730.00
2 ½” 8861.00 13016.00 84680.00 -
3” 8861.00 18256.00 97976.00 84570.00
4” 13544.00 25020.00 130660.00 94500.00
6” 21740.00 37410.00 182310.00 104580.00
8” 30512.00 46755.00 228100.00 -
10” 37118.00 57518.00 283490.00 -
12” 50328.00
14” 75750.00
16” 79538.00
18” 84928.00
20” 103812.00
24” 156663.00
Page 38
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 38
CAST STEEL VALVES WITH ( I.B.R )f FLOWJET MAKE
1” 1 ½” 2” 2 ½” 3” 4” 5” 6” 8” 10” 12”
GATE/ VALAVES 150 lbs 6343.00 6806.00 7993.00 11602.00 13406.00 20109.00 27264.00 32557.00 50820.00 76495.00 98728.00
GLOBE VALVES 150 LBS 4641.00 6137.00 7890.00 9178.00 11447.00 17016.00 27793.00 35734.00 57379.00 83119.00 123874.00
CHECK VALVES 150 LBS 3918.75 4820.75 5955.13 7889.75 9590.63 14698.75 21161.25 23512.50 39710.00 67402.50 106933.79
‘Y’ STRAINER 150 LBS 2784.38 3223.00 4177.25 6187.50 7992.88 11343.75 16940.00 24880.63 37585.63 - -
Note:- Prices of Higher Sizes Rating(Class) NON I.B.R and S.S Valves are on request.
Bronze range of valves IBR ATAM / EQUIP. Size Make ½” ¾” 1” 1 ¼” 1 ½” 2” 2 ½” 3”
Globe valves S/E ATAM 1681.53 2217.88 3240.88 5021.50 7031.70 10436.25 - -
Globe Valve F/E ATAM 4683.25 4943.13 6740.25 9156.13 11312.13 16746.13 - -
Y strainer S/E ATAM 1175.63 1753.13 3778.50 4901.88 7148.63 11001.38 - -
Y Strainer F/E ATAM 3836.25 4587.00 7291.63 8659.75 12298.00 16827.27 - -
Horz lift Check Valve S/E ATAM 1700.88 2013.00 3113.00 5036.63 6514.75 9783.13 - -
Horz lift Check Valve F/E ATAM 4593.88 4951.38 6465.25 8904.50 10957.38 15846.88 - -
Glass protector for guage glass ATAM - - - - - - - -
Asbestos pack guage glass set
S/E
ATAM 6576.63 7471.75 - - - - - -
Asbestos pack guage glass set
F/E
ATAM 8570.38 10745.63 - - - - - -
Parallell side blow off valve F/E ATAM - - 20422.88 23302.13 25176.25 39234.25 75673.13 86325.25
Fusible Plug 2 pcs S/E ATAM 1200.38 1200.38 1369.50 1764.13 2029.50 2957.63 - -
Vertical Non Return Valves S/E ATAM 1982.75 2635.88 3823.88 4633.75 5471.13 7444.25 - -
Vertical Non Return Valves F/E ATAM 4230.88 5553.63 6822.75 10115.88 11218.63 16322.63 - -
Pressure Reducing Valve S/E ATAM 7159.63 10425.25 13866.88 19866.00 23309.00 32441.75 - -
Safety valves open disc S/E ATAM 5061.38 8534.63 9106.38 13396.63 19680.38 30450.75 - -
Safety Valve Encl Disc S/E ATAM 5061.38 8552.50 9062.63 13396.63 19680.38 30450.75 - -
Sight glass flow indicator S/E ATAM 1996.50 2116.13 2854.50 4125.00 4445.38 5119.13 - -
Page 39
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 39
CAST IRON IBR VALVES ATAM / EQUIP. Size ½” ¾” 1” 1 ¼” 1 ½” 2” 2 ½” 3” 4” 5” 6” 8” 10” 12”
GLOBE VALVE F/E ATAM IBR
1821.88 2024.00 2098.28 3095.50 3872.00 4947.25 7077.13 8958.13 13506.63 19434.25 27809.30 - - -
GLOBE VALVE PN-10 F/E ATAM IBR - - - - - - - - - - - 55521.13
111794.3
8 157939.38
JUNCTION STEAM STOP VALVE F/E
ATAM IBR 1878.25 2085.88 2164.25 3192.75 3991.63 5099.88 7295.75 11984.50 13519.00 19431.50 27810.75 - - -
HORIZONTAL LIFT CHECK VALVE F/E
ATAM IBR 1628.00 1882.38 2018.50 2872.38 3488.38 4413.75 6634.38 9035.13 11959.75 18176.13 25451.21 - - -
HORIZONTAL LIFT CHECK VALVE PN-
10 F/E ATAM IBR - - - - -- - - - - - - 50072.00 94336.00 -
RIGHT ANGLE LIFT CHECK VALVE F/E
ATAM IBR 1798.50 2080.38 2230.25 3176.25 3856.88 4878.50 6965.75 9487.50 12557.88 19085.00 26724.50 - - -
Y-TYPE STRAINER S/E ATAM IBR 408.38 583.00 885.00 1256.75 1674.75 2857.25 - - - - - - - -
Y-TYPE STRAINER F/E ATAM IBR - - 2175.25 3929.75 5590.75 8680.38 9678.63 16291.00 24965.88 28811.75 46385.63 - - -
INVERTED BUCKET TYPE STEAM
(VERTICAL) TRAP S/E ATAM IBR 2310.00 2902.63 4669.50 10346.88 10346.88 13085.88 - - - - - - - -
SINGLE POST HI-LIFT SAFETY VALVE
F/E ATAM IBR - - 12427.25 - 18079.88 25433.38 - - - - - - - -
DOUBLE POST HI-LIFT SAFETY VALVE
F/E ATAM IBR - - 20713.00 - 29830.63 41965.00 - - - - - - - -
MOISTURE SEPARATOR F/E ATAM IBR - - 6309.88 - 6626.13 10771.75 16614.13 17619.25 32814.38 53953.63 - - - -
INVERTED BUCKET TYPE STEAM TRAP
(HORIZONTAL) S/E ATAM IBR 2433.75 3055.25 3169.38 10752.50 10752.50 13774.75 - - - - - - - -
Page 40
TUBES & VALVES MANUFACTURING COMPANY 12 Singanna Naicken Street , Parrys Corner , Chennai 600 001.
Ph :- 044- 2522 4353 , 2522 0665.email:- [email protected]
e-store pricelist dated 13-05-2013 (Please call us for current best discounts) Page No 40
CAST STEEL IBR VALVES ATAM / EQUIP. Size ½” ¾” 1” 1 ¼” 1 ½” 2” 2 ½”
PARALLEL SLIDE BLOW OFF VALVE F/E
ATAM IBR - - 13693.63 16142.50 18315.00 23364.00 38242.88
SLEEVE PACKED WATER LEVEL GUAGE
F/E ATAM IBR - 13202.75 - - - - -
SINGLE POST HI-LIFT SAFETY VALVE F/E
ATAM IBR - - 15097.50 - 22598.13 31790.00 -
DOUBLE POST HI-LIFT SAFETY VALVE
F/E ATAM IBR - - 25889.88 - 37288.63 52456.25 -
VERTICAL INVERTED BUCKET TYPE
STEAM TRAP S/E ATAM IBR 3239.50 3410.00 5490.38 12160.50 12160.50 15380.75 -
WAFER TYPE NON SLAM CHECK VALVE
ATAM IBR 697.13 910.25 1149.50 - 2329.25 3015.38 -
General Terms & Conditions:-
1. Rates are Ex- Godown Chennai
2. VAT / CST Extra as applicable
3. Delivery Generally Ex –Stock
4. Payment Immediate / 30 days regular reputed customers.
5. Packing & Forwarding extra as applicable.
6. This cancels our previous Pricelist.
7. Prices are subject to Change Without Notice ( Please visit e-store at www.tubesandvalves.com for current best prices)
