2
AE-255 NT AE-2510 NT Turret punch press Punching technology PRE-VERSION
Automation
Lasertechnologie
Stanztechnologie
Software
Storing
Schneidtechnologie
Abkanttechnologie
Schweisstechnologie
Werkzeuge
VQC
Pantone DS 3-5 C CMYK 0/0/70/15
Pantone DS 36-2 C CMYK 0/50/85/0
Pantone DS 98-1 C CMYK 0/100/70/10
Pantone 287 C CMYK 100/93/0/0
Pantone DS 232-1 C CMYK 100/0/0/0
Pantone DS 254-6 C CMYK 40/0/20/0
Pantone DS 298-3 C CMYK 30/0/70/0
Pantone DS 5-3 C CMYK 0/15/75/0
Pantone DS 5-3 C CMYK 0/15/75/0
Pantone DS 281-5 C CMYK 45/0/50/30
AE-255 NTAE-2510 NT
Turret punch press
Punching technology PrE-VErsioN
5120 (2560)4165 (4100)
2082
(208
2)
Technical modifications reserved. Information on accuracy according to VDI/DGQ 3441.Workpiece precision and material thickness to be processed are also dependent on production conditions,material, type of workpiece, its pretreatment, table size as well as the location of the work area.
Technical data AE-255 NT AE-2510 NT
Punching force 200 kN
Machine movement range
Axis travel (Y/X) 1270 x 1270 mm 1270 x 2500 mm
With automatic repositioning 1270 x 2540 mm 1270 x 5000 mmMax. material thickness* normal steel Standard Option
Brush table version up to 3.2 mmBrush table version up to 6.4 mm
Table loading weight 150 kg (F4) 50 kg (F1)
Positioning speed X-, Y- axis 80/60 m/min
Simultaneous axis speed 100 m/min
Position accuracy (without repositioning)* ± 0.1 mm
In high accuracy mode* ± 0.07 mm
Turret bore 51 stations, 4 of which are rotatable
Turret rotation speed 30/min-1
Number of punching strokes
Max. hit rate 480/min 480/min
With 25.4 mm pitch 370/min 350/min
In marking mode 900/min 900/min
Machine frame Bridge frame
Punching drive Servo-electric
Turret/table drive AC servomotors
Clamping Pneumatic
Electrical connection 400 V/50 Hz (+ 6 %, - 10 %)
Electrical consumption0.7 kW in standby3.5 kW average
Machine air requirement 500 l/min including air blow
Power vacuum 250 l/min
Machine weight 12,000 kg 13,000 kg
Controller
Model AMNC-F
Memory capacity 10 MB
Number of controlled axes
5
Programming Absolute/incremental
Input resolution 0.01 mm
During rotation 0.01°
Max. input value +/- 99999.999
Approach zero pointManual or by
programming command
Possible features
Work chute 300 x 300 mm ■Sheet deformation sensors ■Lifting brush table ■Tool lift ■Air blow tool lubrication ■Punch slug removal ■Side tables ■Adjusting tools ■Punch slugs and workpiece conveyer belts, ■tool grinding machineLoading and unloading systems ■Programming software ■
Dimensions of AE-2510 NT (in brackets AE-255 NT)
Amada GmbHAmada Allee 142781 HaanGermany
Tel. +49 2104 2126-0Fax +49 2104 2126-999
Amad
a Gm
bH –
AE_
500-
Pr_D
E_EN
/ 10
-201
0/1
