A c h i e v i n g O p t i m u m B a l a n c e f o r M a x i m u m V a l u e

E n g i n e e r e d S o l u t i o n s

G E N E R A L P U R P O S E

O E M & P r o c e s sA p p l i c a t i o n s

LE Pumps• Compact and flexible drive options• Flow rates to 13.7 usgpm (3 m3/hr)• Pressures to 500 psi (34.5 bar)

ww

w.t

uth

illp

um

p.c

om

E n g i n e e r e d S o l u t i o n s

To find an authorized distributor, visit www.tuthillpump.com/distributors

Tuthill Pump Group12500 South Pulaski RoadAlsip, Illinois 60803 USAphone: 708-389-2500 / fax: 708-388-0869email: tuthillpump@tuthill.com

Tuthill Pump Group5143 Port Chicago HighwayConcord, California 94520 USAphone: 925-676-8000 / fax: 925-676-8151email: concord@tuthill.com

Tuthill Pump GroupBirkdale CloseManners Industrial EstateIlkeston, Derbyshire DE7 8YA Englandphone: 44.115.932.5226 / fax: 44.115.932.2526email: tuthillpumpuk@tuthill.com

Tuthill EuropeParc industriel Wavre NordAvenue Vésale, 30 - 1300 Wavre - Belgiumphone: 32 10 22 83 34 / fax: 32 10 23 82 40email: tld@tuthill.com

Tuthill Latin America255 Alhambra Circle, Suite 320Coral Gables, Florida 33134 USAphone: 305-740-3381 / fax: 305-740-9328email: tuthill.latinamerica@tuthill.com

Tuthill Australia19/21 Milton Park, 128 Canterbury RoadKilsyth, Victoria, 3137, Australiaphone: 61 3 9720 6533 / fax: 61 3 9720 6880email: asiapacific@tuthill.com.au

Tuthill China Limited88 Jia Xiu Road, Nan Xiang TownJia Ding District Shanghai, P. R. C. 201802phone: 86 21 69171999 / fax: 86 21 69172162 email: china@tuthill.com.cn

1000 Pumps• Internal gear

pump design• Flow rates to

13.7 usgpm (3 m3/hr)• Pressures to 300 psi (20.7 bar)• Multiple porting options with

side ports as standard• Cast iron construction

G Pumps• Gerotor pump design• Compact pump

assemblies built directly into OEM equipment

• Complete gerotor pumps designed to fit custom applications

• Flow rates to 20 usgpm (3 m3/hr)• Pressures to 100 psi (6.9 bar)• Multiple porting options including discharge

through the drive shaft• Reversing feature standard on most models

• Compressors• Transmissions

• Gearboxes• Engines

• Fuel Oil• Filtration

• Bulk Transfer

L U B R I C A T I O N & C I R C U L A T I O N

Tuthill’s L & C series cast iron positive displacement pumps have been the industry standard for Lubrication & Circulation for over 75 years. These internal gear pumps are available with Tuthill’s unique reversing features as well as mounting, driving, and sealing options to suit all your applications.

C Pumps• Flexible mounting, sealing,

and driving options• Flow rates to 84 usgpm

(19 m3/hr)• Pressures to 250 psi

(17.2 bar)

Cartridge Pumps• Compact design mounts directly to

OEM equipment• Multiple porting and driving options• Flow rates to 6 usgpm (1.4 m3/hr)• Pressures to 150 psi (10.3 bar)

Stripped Pumps• Partial pump assemblies built directly

into OEM equipment• Flow rates to 200 usgpm (45.4 m3/hr)• Pressures to 150 psi (10.3 bar)

G S E R I E S 1 0 0 0 S E R I E S

Genera l Purpose Markets and Appl ica t ions

L S E R I E S C S E R I E S

TUT08704 7/08

• Chemical Processing

• Petroleum Products

• Asphalt• Foods

• Inks, Paints & Pigments

• Pulp & Paper• Bulk Transfer

Our philosophy is embodied in the Tuthill Business System – representing an optimum

balance between the needs of the customer, shareholders, and employees.

It begins with listening to what our customers want and need, then finding the most

efficient and productive way to fulfill that need. By giving our employees the proper tools,

training and motivation, the job is always done well. It’s about the way we treat our

employees, the way we treat our business, and the way we treat YOU.

This philosophy has resulted in a lean, flexible manufacturing system that:

• Strives to eliminate waste from the manufacturing process, and is driven by

YOUR needs and requirements.

• Cuts lead-time down drastically, even on customized equipment, and helps us

to modify our designs quickly based on YOUR changing needs. This flexibility gives

us the freedom to innovate and engineer solutions to your problems.

• Gives you what you want, in the right quantity, at the right time.

By maintaining optimum balance, the employees win, the manufacturing system is free of

waste, and the result is lower cost, better quality products, improved customer service and

faster delivery. All focused on giving you, the customer, the best value for your money.

Contact us with your application and experience the value, flexibility, and quality

that are the Tuthill Pump Group.

I N D U S T R I A L D U T Y

GG Pumps• Back pull-out design

provides ease of maintenance

• Flow rates to 550 usgpm (124.9 m3/hr)

• Pressures to 200 psi (13.8 bar)

• Viscosities to 1,000,000 ssu (220,000 cst)

A wide range of products.

All driven by one philosophy.

All part of one family.

E n g i n e e r e d S o l u t i o n s

w w w . t u t h i l l p u m p . c o m

Indust r ia l P rocess Markets and Appl ica t ions Magnet ica l l y Coupled Markets and Appl ica t ions• Medical Equipment • Laser Cooling • Water Purification• Laboratory Equipment

Tuthill offers OEM pump units from our GlobalGear family for applicationsrequiring either higher flow or heavy dutyservice designs. Customized designs areavailable for OEM’s that include close coupled mounting, hydraulic motordrives, belt drives, and seal-less magneticcouplings. High suction pressure, highfluid temperature, and cold starting condi-tions designs are available for specificapplication challenges. Pump constructionmaterials include cast iron, cast steel, andstainless steel. Typical applications includelube oil pump-motor assemblies for compressor and rotating equipment skids,pump units for hot oil systems and hotasphalt packages.

H D S E R I E S

G L O B A L G E A R ® S E R I E S

C H E M I C A L A N D C O R R O S I O N R E S I S T A N T

Tuthill's miniature magnetically coupledpumps are designed to provide exceptionalreliability. The long life and non-pulsingflow are combined with the magneticallycoupled, leak free, seal-less technology.These magnetically coupled pumps are con-structed of 316 stainless steel, hastelloy, tita-nium, or engineered plastics making thesepumps tough and reliable.

D Series• External Gear design• Flow rates from

1 ml/min to 121 gph (458 L/hr)

• Differential pressures to 250 psi (17.2 bar)

• Temperatures to 350°F (176°C)• Viscosity: 0.3 cps to over 10,000 cps• ATEX approved

H I G H F L O W I N D U S T R I A L

• Chemical Metering• Semiconductor Equipment • Liquid Chromatography • Industrial Inkjet Printers

• Food Processing Equipment• Industrial Temperature Control

• Polyurethane Foam Systems

• Wastewater Treatment• Water Treatment• Chemical Systems

HD Pumps• Capable of running

dry indefinitely• Flow rates to 650 usgpm (148 m3/hr)• Pressures to 450 psi (31 bar)• Viscosities to 20,000,000 ssu (4,400,000 cst)

Tuthill offers the HD series of product forthe most demanding applications. The HDseries is capable of handling multiplepumping challenges that may includepresence of solids, and large viscosity andtemperature ranges in one application.HD pumps can offer system builders andOEM’s an attractive alternative to pro-gressing cavity pumps and air-operateddiaphragm pumps. HD pumps will toler-ate intermittent run dry, are relativelycompact, will pump liquids with viscosi-ties that range from thin to very thick, willhandle temperatures up 525ºF, and areenergy efficient. Standard pump construc-tion is in ductile iron or 316 stainless steel.

Tuthill’s robust M Series magnetic coupled internal gear pumps are designedto withstand the unexpected. They usegenerously sized high temperature samarium cobalt magnets and are lesslikely to decouple when exposed to processupsets and cold starts. The M-series magnetically coupled pumps will toleratesome decoupling and run dry.

W Series• External Gear Metering Pumps• No Vapor Trapping Valveless Design• Effective for metering Sodium Hypochlorite• Metering Accuracy better than 1%• Flow <1 ml/min to 650 GPH (2460 L/Hr)• Differential pressures up to 250 PSI (17.2 bar)

M Series• Flow Rates from 0.5 to 80 GPM

(.11 to 18.2 m3/hr)• Differential Pressure: to 500 psi • Temperature: 300°F (149°C)

standard construction• Temperature: 500 °F (260°C)

high temperature construction• Viscosity: to 75,000 ssu (16,500 centistokes)

C H E M I C A L M E T E R I N G

V Series• Patented vane

pump technology• Engineered plastic

construction• Flows to 1.5 gpm (5.6 lpm)• Differential pressures to 60 psi (4 bar)• Temperatures to 150°F (65°C)• Viscosities from 0.3 cps to 100 cps

P Series• External Gear design• Engineered plastic

construction• Flows to 65 gph

(227 L/hr)• Differential pressures

to 150 psi (10.3 bar)• Temperatures to 150°F (65°C)• Viscosity: 0.3 cps to over 10,000 cps

T Series • External Gear design• Flow rates from 5 to 650 gph (2460 L/hr)• Differential pressures to 250 psi (17.2 bar)• Temperatures to 350°F (176°C)• Viscosity: 0.3 cps to over 10,000 cps• ATEX approved

M A G N E T I C A L L Y C O U P L E D

The M-series materials of construction are cast iron or 316 stainless steel. Therobust magnetically coupled design makesthese pumps ideal for difficult and haz-ardous liquids. The M-Series magneticallycoupled pumps provide the ultimate pro-tection where no leakage can be tolerated.

OEM applications for HDpumps include wastewatersystems builders, fryer oil recov-ery systems, black liquor soapand paper coating packages,waste fuel handling systems, andstarch handling systems.

Tuthill’s W-Series magnetically coupledexternal gear chemical metering pumps aredesigned specifically for the harsh environ-ment associated with water and wastewaterchemical treatment. The external gear tech-nology resists gas vapor locking caused byout gassing sodium hypochlorite. The W-Series simple and robust long life design iseasy to install and maintain. The W-Seriesconstruction options are 316 stainless steel,hastelloy, or titanium.

• Chemical Processing

• Petroleum Products

• Asphalt• Foods

• Inks, Paints & Pigments

• Pulp & Paper• Bulk Transfer

Our philosophy is embodied in the Tuthill Business System – representing an optimum

balance between the needs of the customer, shareholders, and employees.

It begins with listening to what our customers want and need, then finding the most

efficient and productive way to fulfill that need. By giving our employees the proper tools,

training and motivation, the job is always done well. It’s about the way we treat our

employees, the way we treat our business, and the way we treat YOU.

This philosophy has resulted in a lean, flexible manufacturing system that:

• Strives to eliminate waste from the manufacturing process, and is driven by

YOUR needs and requirements.

• Cuts lead-time down drastically, even on customized equipment, and helps us

to modify our designs quickly based on YOUR changing needs. This flexibility gives

us the freedom to innovate and engineer solutions to your problems.

• Gives you what you want, in the right quantity, at the right time.

By maintaining optimum balance, the employees win, the manufacturing system is free of

waste, and the result is lower cost, better quality products, improved customer service and

faster delivery. All focused on giving you, the customer, the best value for your money.

Contact us with your application and experience the value, flexibility, and quality

that are the Tuthill Pump Group.

I N D U S T R I A L D U T Y

GG Pumps• Back pull-out design

provides ease of maintenance

• Flow rates to 550 usgpm (124.9 m3/hr)

• Pressures to 200 psi (13.8 bar)

• Viscosities to 1,000,000 ssu (220,000 cst)

A wide range of products.

All driven by one philosophy.

All part of one family.

E n g i n e e r e d S o l u t i o n s

w w w . t u t h i l l p u m p . c o m

Indust r ia l P rocess Markets and Appl ica t ions Magnet ica l l y Coupled Markets and Appl ica t ions• Medical Equipment • Laser Cooling • Water Purification• Laboratory Equipment

Tuthill offers OEM pump units from our GlobalGear family for applicationsrequiring either higher flow or heavy dutyservice designs. Customized designs areavailable for OEM’s that include close coupled mounting, hydraulic motordrives, belt drives, and seal-less magneticcouplings. High suction pressure, highfluid temperature, and cold starting condi-tions designs are available for specificapplication challenges. Pump constructionmaterials include cast iron, cast steel, andstainless steel. Typical applications includelube oil pump-motor assemblies for compressor and rotating equipment skids,pump units for hot oil systems and hotasphalt packages.

H D S E R I E S

G L O B A L G E A R ® S E R I E S

C H E M I C A L A N D C O R R O S I O N R E S I S T A N T

Tuthill's miniature magnetically coupledpumps are designed to provide exceptionalreliability. The long life and non-pulsingflow are combined with the magneticallycoupled, leak free, seal-less technology.These magnetically coupled pumps are con-structed of 316 stainless steel, hastelloy, tita-nium, or engineered plastics making thesepumps tough and reliable.

D Series• External Gear design• Flow rates from

1 ml/min to 121 gph (458 L/hr)

• Differential pressures to 250 psi (17.2 bar)

• Temperatures to 350°F (176°C)• Viscosity: 0.3 cps to over 10,000 cps• ATEX approved

H I G H F L O W I N D U S T R I A L

• Chemical Metering• Semiconductor Equipment • Liquid Chromatography • Industrial Inkjet Printers

• Food Processing Equipment• Industrial Temperature Control

• Polyurethane Foam Systems

• Wastewater Treatment• Water Treatment• Chemical Systems

HD Pumps• Capable of running

dry indefinitely• Flow rates to 650 usgpm (148 m3/hr)• Pressures to 450 psi (31 bar)• Viscosities to 20,000,000 ssu (4,400,000 cst)

Tuthill offers the HD series of product forthe most demanding applications. The HDseries is capable of handling multiplepumping challenges that may includepresence of solids, and large viscosity andtemperature ranges in one application.HD pumps can offer system builders andOEM’s an attractive alternative to pro-gressing cavity pumps and air-operateddiaphragm pumps. HD pumps will toler-ate intermittent run dry, are relativelycompact, will pump liquids with viscosi-ties that range from thin to very thick, willhandle temperatures up 525ºF, and areenergy efficient. Standard pump construc-tion is in ductile iron or 316 stainless steel.

Tuthill’s robust M Series magnetic coupled internal gear pumps are designedto withstand the unexpected. They usegenerously sized high temperature samarium cobalt magnets and are lesslikely to decouple when exposed to processupsets and cold starts. The M-series magnetically coupled pumps will toleratesome decoupling and run dry.

W Series• External Gear Metering Pumps• No Vapor Trapping Valveless Design• Effective for metering Sodium Hypochlorite• Metering Accuracy better than 1%• Flow <1 ml/min to 650 GPH (2460 L/Hr)• Differential pressures up to 250 PSI (17.2 bar)

M Series• Flow Rates from 0.5 to 80 GPM

(.11 to 18.2 m3/hr)• Differential Pressure: to 500 psi • Temperature: 300°F (149°C)

standard construction• Temperature: 500 °F (260°C)

high temperature construction• Viscosity: to 75,000 ssu (16,500 centistokes)

C H E M I C A L M E T E R I N G

V Series• Patented vane

pump technology• Engineered plastic

construction• Flows to 1.5 gpm (5.6 lpm)• Differential pressures to 60 psi (4 bar)• Temperatures to 150°F (65°C)• Viscosities from 0.3 cps to 100 cps

P Series• External Gear design• Engineered plastic

construction• Flows to 65 gph

(227 L/hr)• Differential pressures

to 150 psi (10.3 bar)• Temperatures to 150°F (65°C)• Viscosity: 0.3 cps to over 10,000 cps

T Series • External Gear design• Flow rates from 5 to 650 gph (2460 L/hr)• Differential pressures to 250 psi (17.2 bar)• Temperatures to 350°F (176°C)• Viscosity: 0.3 cps to over 10,000 cps• ATEX approved

M A G N E T I C A L L Y C O U P L E D

The M-series materials of construction are cast iron or 316 stainless steel. Therobust magnetically coupled design makesthese pumps ideal for difficult and haz-ardous liquids. The M-Series magneticallycoupled pumps provide the ultimate pro-tection where no leakage can be tolerated.

OEM applications for HDpumps include wastewatersystems builders, fryer oil recov-ery systems, black liquor soapand paper coating packages,waste fuel handling systems, andstarch handling systems.

Tuthill’s W-Series magnetically coupledexternal gear chemical metering pumps aredesigned specifically for the harsh environ-ment associated with water and wastewaterchemical treatment. The external gear tech-nology resists gas vapor locking caused byout gassing sodium hypochlorite. The W-Series simple and robust long life design iseasy to install and maintain. The W-Seriesconstruction options are 316 stainless steel,hastelloy, or titanium.

• Chemical Processing

• Petroleum Products

• Asphalt• Foods

• Inks, Paints & Pigments

• Pulp & Paper• Bulk Transfer

Our philosophy is embodied in the Tuthill Business System – representing an optimum

balance between the needs of the customer, shareholders, and employees.

It begins with listening to what our customers want and need, then finding the most

efficient and productive way to fulfill that need. By giving our employees the proper tools,

training and motivation, the job is always done well. It’s about the way we treat our

employees, the way we treat our business, and the way we treat YOU.

This philosophy has resulted in a lean, flexible manufacturing system that:

• Strives to eliminate waste from the manufacturing process, and is driven by

YOUR needs and requirements.

• Cuts lead-time down drastically, even on customized equipment, and helps us

to modify our designs quickly based on YOUR changing needs. This flexibility gives

us the freedom to innovate and engineer solutions to your problems.

• Gives you what you want, in the right quantity, at the right time.

By maintaining optimum balance, the employees win, the manufacturing system is free of

waste, and the result is lower cost, better quality products, improved customer service and

faster delivery. All focused on giving you, the customer, the best value for your money.

Contact us with your application and experience the value, flexibility, and quality

that are the Tuthill Pump Group.

I N D U S T R I A L D U T Y

GG Pumps• Back pull-out design

provides ease of maintenance

• Flow rates to 550 usgpm (124.9 m3/hr)

• Pressures to 200 psi (13.8 bar)

• Viscosities to 1,000,000 ssu (220,000 cst)

A wide range of products.

All driven by one philosophy.

All part of one family.

E n g i n e e r e d S o l u t i o n s

w w w . t u t h i l l p u m p . c o m

Indust r ia l P rocess Markets and Appl ica t ions Magnet ica l l y Coupled Markets and Appl ica t ions• Medical Equipment • Laser Cooling • Water Purification• Laboratory Equipment

Tuthill offers OEM pump units from our GlobalGear family for applicationsrequiring either higher flow or heavy dutyservice designs. Customized designs areavailable for OEM’s that include close coupled mounting, hydraulic motordrives, belt drives, and seal-less magneticcouplings. High suction pressure, highfluid temperature, and cold starting condi-tions designs are available for specificapplication challenges. Pump constructionmaterials include cast iron, cast steel, andstainless steel. Typical applications includelube oil pump-motor assemblies for compressor and rotating equipment skids,pump units for hot oil systems and hotasphalt packages.

H D S E R I E S

G L O B A L G E A R ® S E R I E S

C H E M I C A L A N D C O R R O S I O N R E S I S T A N T

Tuthill's miniature magnetically coupledpumps are designed to provide exceptionalreliability. The long life and non-pulsingflow are combined with the magneticallycoupled, leak free, seal-less technology.These magnetically coupled pumps are con-structed of 316 stainless steel, hastelloy, tita-nium, or engineered plastics making thesepumps tough and reliable.

D Series• External Gear design• Flow rates from

1 ml/min to 121 gph (458 L/hr)

• Differential pressures to 250 psi (17.2 bar)

• Temperatures to 350°F (176°C)• Viscosity: 0.3 cps to over 10,000 cps• ATEX approved

H I G H F L O W I N D U S T R I A L

• Chemical Metering• Semiconductor Equipment • Liquid Chromatography • Industrial Inkjet Printers

• Food Processing Equipment• Industrial Temperature Control

• Polyurethane Foam Systems

• Wastewater Treatment• Water Treatment• Chemical Systems

HD Pumps• Capable of running

dry indefinitely• Flow rates to 650 usgpm (148 m3/hr)• Pressures to 450 psi (31 bar)• Viscosities to 20,000,000 ssu (4,400,000 cst)

Tuthill offers the HD series of product forthe most demanding applications. The HDseries is capable of handling multiplepumping challenges that may includepresence of solids, and large viscosity andtemperature ranges in one application.HD pumps can offer system builders andOEM’s an attractive alternative to pro-gressing cavity pumps and air-operateddiaphragm pumps. HD pumps will toler-ate intermittent run dry, are relativelycompact, will pump liquids with viscosi-ties that range from thin to very thick, willhandle temperatures up 525ºF, and areenergy efficient. Standard pump construc-tion is in ductile iron or 316 stainless steel.

Tuthill’s robust M Series magnetic coupled internal gear pumps are designedto withstand the unexpected. They usegenerously sized high temperature samarium cobalt magnets and are lesslikely to decouple when exposed to processupsets and cold starts. The M-series magnetically coupled pumps will toleratesome decoupling and run dry.

W Series• External Gear Metering Pumps• No Vapor Trapping Valveless Design• Effective for metering Sodium Hypochlorite• Metering Accuracy better than 1%• Flow <1 ml/min to 650 GPH (2460 L/Hr)• Differential pressures up to 250 PSI (17.2 bar)

M Series• Flow Rates from 0.5 to 80 GPM

(.11 to 18.2 m3/hr)• Differential Pressure: to 500 psi • Temperature: 300°F (149°C)

standard construction• Temperature: 500 °F (260°C)

high temperature construction• Viscosity: to 75,000 ssu (16,500 centistokes)

C H E M I C A L M E T E R I N G

V Series• Patented vane

pump technology• Engineered plastic

construction• Flows to 1.5 gpm (5.6 lpm)• Differential pressures to 60 psi (4 bar)• Temperatures to 150°F (65°C)• Viscosities from 0.3 cps to 100 cps

P Series• External Gear design• Engineered plastic

construction• Flows to 65 gph

(227 L/hr)• Differential pressures

to 150 psi (10.3 bar)• Temperatures to 150°F (65°C)• Viscosity: 0.3 cps to over 10,000 cps

T Series • External Gear design• Flow rates from 5 to 650 gph (2460 L/hr)• Differential pressures to 250 psi (17.2 bar)• Temperatures to 350°F (176°C)• Viscosity: 0.3 cps to over 10,000 cps• ATEX approved

M A G N E T I C A L L Y C O U P L E D

The M-series materials of construction are cast iron or 316 stainless steel. Therobust magnetically coupled design makesthese pumps ideal for difficult and haz-ardous liquids. The M-Series magneticallycoupled pumps provide the ultimate pro-tection where no leakage can be tolerated.

OEM applications for HDpumps include wastewatersystems builders, fryer oil recov-ery systems, black liquor soapand paper coating packages,waste fuel handling systems, andstarch handling systems.

Tuthill’s W-Series magnetically coupledexternal gear chemical metering pumps aredesigned specifically for the harsh environ-ment associated with water and wastewaterchemical treatment. The external gear tech-nology resists gas vapor locking caused byout gassing sodium hypochlorite. The W-Series simple and robust long life design iseasy to install and maintain. The W-Seriesconstruction options are 316 stainless steel,hastelloy, or titanium.

A c h i e v i n g O p t i m u m B a l a n c e f o r M a x i m u m V a l u e

E n g i n e e r e d S o l u t i o n s

G E N E R A L P U R P O S E

O E M & P r o c e s sA p p l i c a t i o n s

LE Pumps• Compact and flexible drive options• Flow rates to 13.7 usgpm (3 m3/hr)• Pressures to 500 psi (34.5 bar)

ww

w.t

uth

illp

um

p.c

om

E n g i n e e r e d S o l u t i o n s

To find an authorized distributor, visit www.tuthillpump.com/distributors

Tuthill Pump Group12500 South Pulaski RoadAlsip, Illinois 60803 USAphone: 708-389-2500 / fax: 708-388-0869email: tuthillpump@tuthill.com

Tuthill Pump Group5143 Port Chicago HighwayConcord, California 94520 USAphone: 925-676-8000 / fax: 925-676-8151email: concord@tuthill.com

Tuthill Pump GroupBirkdale CloseManners Industrial EstateIlkeston, Derbyshire DE7 8YA Englandphone: 44.115.932.5226 / fax: 44.115.932.2526email: tuthillpumpuk@tuthill.com

Tuthill EuropeParc industriel Wavre NordAvenue Vésale, 30 - 1300 Wavre - Belgiumphone: 32 10 22 83 34 / fax: 32 10 23 82 40email: tld@tuthill.com

Tuthill Latin America255 Alhambra Circle, Suite 320Coral Gables, Florida 33134 USAphone: 305-740-3381 / fax: 305-740-9328email: tuthill.latinamerica@tuthill.com

Tuthill Australia19/21 Milton Park, 128 Canterbury RoadKilsyth, Victoria, 3137, Australiaphone: 61 3 9720 6533 / fax: 61 3 9720 6880email: asiapacific@tuthill.com.au

Tuthill China Limited88 Jia Xiu Road, Nan Xiang TownJia Ding District Shanghai, P. R. C. 201802phone: 86 21 69171999 / fax: 86 21 69172162 email: china@tuthill.com.cn

1000 Pumps• Internal gear

pump design• Flow rates to

13.7 usgpm (3 m3/hr)• Pressures to 300 psi (20.7 bar)• Multiple porting options with

side ports as standard• Cast iron construction

G Pumps• Gerotor pump design• Compact pump

assemblies built directly into OEM equipment

• Complete gerotor pumps designed to fit custom applications

• Flow rates to 20 usgpm (3 m3/hr)• Pressures to 100 psi (6.9 bar)• Multiple porting options including discharge

through the drive shaft• Reversing feature standard on most models

• Compressors• Transmissions

• Gearboxes• Engines

• Fuel Oil• Filtration

• Bulk Transfer

L U B R I C A T I O N & C I R C U L A T I O N

Tuthill’s L & C series cast iron positive displacement pumps have been the industry standard for Lubrication & Circulation for over 75 years. These internal gear pumps are available with Tuthill’s unique reversing features as well as mounting, driving, and sealing options to suit all your applications.

C Pumps• Flexible mounting, sealing,

and driving options• Flow rates to 84 usgpm

(19 m3/hr)• Pressures to 250 psi

(17.2 bar)

Cartridge Pumps• Compact design mounts directly to

OEM equipment• Multiple porting and driving options• Flow rates to 6 usgpm (1.4 m3/hr)• Pressures to 150 psi (10.3 bar)

Stripped Pumps• Partial pump assemblies built directly

into OEM equipment• Flow rates to 200 usgpm (45.4 m3/hr)• Pressures to 150 psi (10.3 bar)

G S E R I E S 1 0 0 0 S E R I E S

Genera l Purpose Markets and Appl ica t ions

L S E R I E S C S E R I E S

TUT08704 7/08

A c h i e v i n g O p t i m u m B a l a n c e f o r M a x i m u m V a l u e

E n g i n e e r e d S o l u t i o n s

G E N E R A L P U R P O S E

O E M & P r o c e s sA p p l i c a t i o n s

LE Pumps• Compact and flexible drive options• Flow rates to 13.7 usgpm (3 m3/hr)• Pressures to 500 psi (34.5 bar)

ww

w.t

uth

illp

um

p.c

om

E n g i n e e r e d S o l u t i o n s

To find an authorized distributor, visit www.tuthillpump.com/distributors

Tuthill Pump Group12500 South Pulaski RoadAlsip, Illinois 60803 USAphone: 708-389-2500 / fax: 708-388-0869email: tuthillpump@tuthill.com

Tuthill Pump Group5143 Port Chicago HighwayConcord, California 94520 USAphone: 925-676-8000 / fax: 925-676-8151email: concord@tuthill.com

Tuthill Pump GroupBirkdale CloseManners Industrial EstateIlkeston, Derbyshire DE7 8YA Englandphone: 44.115.932.5226 / fax: 44.115.932.2526email: tuthillpumpuk@tuthill.com

Tuthill EuropeParc industriel Wavre NordAvenue Vésale, 30 - 1300 Wavre - Belgiumphone: 32 10 22 83 34 / fax: 32 10 23 82 40email: tld@tuthill.com

Tuthill Latin America255 Alhambra Circle, Suite 320Coral Gables, Florida 33134 USAphone: 305-740-3381 / fax: 305-740-9328email: tuthill.latinamerica@tuthill.com

Tuthill Australia19/21 Milton Park, 128 Canterbury RoadKilsyth, Victoria, 3137, Australiaphone: 61 3 9720 6533 / fax: 61 3 9720 6880email: asiapacific@tuthill.com.au

Tuthill China Limited88 Jia Xiu Road, Nan Xiang TownJia Ding District Shanghai, P. R. C. 201802phone: 86 21 69171999 / fax: 86 21 69172162 email: china@tuthill.com.cn

1000 Pumps• Internal gear

pump design• Flow rates to

13.7 usgpm (3 m3/hr)• Pressures to 300 psi (20.7 bar)• Multiple porting options with

side ports as standard• Cast iron construction

G Pumps• Gerotor pump design• Compact pump

assemblies built directly into OEM equipment

• Complete gerotor pumps designed to fit custom applications

• Flow rates to 20 usgpm (3 m3/hr)• Pressures to 100 psi (6.9 bar)• Multiple porting options including discharge

through the drive shaft• Reversing feature standard on most models

• Compressors• Transmissions

• Gearboxes• Engines

• Fuel Oil• Filtration

• Bulk Transfer

L U B R I C A T I O N & C I R C U L A T I O N

Tuthill’s L & C series cast iron positive displacement pumps have been the industry standard for Lubrication & Circulation for over 75 years. These internal gear pumps are available with Tuthill’s unique reversing features as well as mounting, driving, and sealing options to suit all your applications.

C Pumps• Flexible mounting, sealing,

and driving options• Flow rates to 84 usgpm

(19 m3/hr)• Pressures to 250 psi

(17.2 bar)

Cartridge Pumps• Compact design mounts directly to

OEM equipment• Multiple porting and driving options• Flow rates to 6 usgpm (1.4 m3/hr)• Pressures to 150 psi (10.3 bar)

Stripped Pumps• Partial pump assemblies built directly

into OEM equipment• Flow rates to 200 usgpm (45.4 m3/hr)• Pressures to 150 psi (10.3 bar)

G S E R I E S 1 0 0 0 S E R I E S

Genera l Purpose Markets and Appl ica t ions

L S E R I E S C S E R I E S

TUT08704 7/08

A c h i e v i n g O p t i m um B a l a n c e f o r M a x i m um Va l u e

Tough Pumps wi thF ie ld Proven Re l iab i l i t y

ww

w.t

uthi

llpum

p.co

m For additional information, please visit:

www.tuthillpump.com

The Tech Info Library Includes

• Performance Curves

• Service Manuals

• Sample Guide Specifications

• Engineering Data Packs with Dimensions

and Design Information

Tuthill Pump Group

12500 South Pulaski Road

Alsip, Illinois 60803 USA

phone: 708-389-2500

Tuthill United Kingdom

Birkdale Close

Manners Industrial Estate

Ilkeston, Derbyshire DE7 8YA UK

phone: 44.0.115.932.5226

Tuthill China

88 Jia Xiu Road

Nan Xiang Town Jia Ding District

Shanghai, P.R.C. 201802 China

phone: 86.21.6917.1999

G L O B A L G E A R ® P R O C E S S P U M P

Tuthill tough. And flexible—for the way you work.

TUT12701 6/13

GlobalGear was introduced in 2001, and since then more than 12,000 pumps have been shipped to locations all over the world.

INDUSTRIES AND APPLICATIONS Where GlobalGear Pumps Have Been Applied

Chemical Processing: Polymers, resins, adhesives, glues, solvents, sodium hydroxide, magnesium hydroxide, phosphoric acid, plasticizers, pigments, catalysts, additives, polyvinyl alcohol, silicone oils

Petrochemical: API 676 rotary pumps, asphalt, grease, lube oil, motor oil, turbine oil, fuel oil, bunker C heavy fuel oil,diesel fuel, synthetic oils, odorant, additives, drilling support systems

Printing: Inks and pigments

Personal Products: Soap, detergents, surfactants, perfume, paraffin wax

Polyurethane Foam Manufacturing: Polyol, isocyanate, fire retardants

Pulp & Paper: Starch, clay coatings, tall oil

Paints & Coatings: Paint, stains, varnish, enamel, solvents

Construction Materials: Asphalt, filled asphalt, caulk, concrete additives

Agricultural Chemicals: Biocides, herbicides, urea

Aviation: Kerosene, Skydrol, glycol

Food & Beverage: Soybean oil, canola oil, hot fry oil, high fructose corn syrup, sucrose, glucose, molasses, honey, liquid sugars, chocolate, tallow, lard, peanut butter, caramel coloring, mustard

Energy & Power: Biodiesel, glycerin, waste oil

Package Systems: Hydraulic oil, compressor oil, heat transfer fluids, hot oil, glycol

CARTRIDGE SEAL

PACKING

MECHANICAL SEAL

BEHIND THE ROTOR SEALLOCATION AVAILABLE

CUSTOMIZING Your Global Gear PumpGlobalGear Pumps are versatile and can be customized to meet the requirements of specific applications.

Optional Features:

• Relief Valves

• Seal Choices

• Heat Jackets

• Oversized and High

Pressure Flanges

• Abrasive Fluid

Special Construction

• High Temperature

Construction

FLANGE CHOICES

RELIEF VALVE

A c h i e v i n g O p t i m um B a l a n c e f o r M a x i m um Va l u e

Tough Pumps wi thF ie ld Proven Re l iab i l i t y

ww

w.t

uthi

llpum

p.co

m For additional information, please visit:

www.tuthillpump.com

The Tech Info Library Includes

• Performance Curves

• Service Manuals

• Sample Guide Specifications

• Engineering Data Packs with Dimensions

and Design Information

Tuthill Pump Group

12500 South Pulaski Road

Alsip, Illinois 60803 USA

phone: 708-389-2500

Tuthill United Kingdom

Birkdale Close

Manners Industrial Estate

Ilkeston, Derbyshire DE7 8YA UK

phone: 44.0.115.932.5226

Tuthill China

88 Jia Xiu Road

Nan Xiang Town Jia Ding District

Shanghai, P.R.C. 201802 China

phone: 86.21.6917.1999

G L O B A L G E A R ® P R O C E S S P U M P

Tuthill tough. And flexible—for the way you work.

TUT12701 6/13

GlobalGear was introduced in 2001, and since then more than 12,000 pumps have been shipped to locations all over the world.

INDUSTRIES AND APPLICATIONS Where GlobalGear Pumps Have Been Applied

Chemical Processing: Polymers, resins, adhesives, glues, solvents, sodium hydroxide, magnesium hydroxide, phosphoric acid, plasticizers, pigments, catalysts, additives, polyvinyl alcohol, silicone oils

Petrochemical: API 676 rotary pumps, asphalt, grease, lube oil, motor oil, turbine oil, fuel oil, bunker C heavy fuel oil,diesel fuel, synthetic oils, odorant, additives, drilling support systems

Printing: Inks and pigments

Personal Products: Soap, detergents, surfactants, perfume, paraffin wax

Polyurethane Foam Manufacturing: Polyol, isocyanate, fire retardants

Pulp & Paper: Starch, clay coatings, tall oil

Paints & Coatings: Paint, stains, varnish, enamel, solvents

Construction Materials: Asphalt, filled asphalt, caulk, concrete additives

Agricultural Chemicals: Biocides, herbicides, urea

Aviation: Kerosene, Skydrol, glycol

Food & Beverage: Soybean oil, canola oil, hot fry oil, high fructose corn syrup, sucrose, glucose, molasses, honey, liquid sugars, chocolate, tallow, lard, peanut butter, caramel coloring, mustard

Energy & Power: Biodiesel, glycerin, waste oil

Package Systems: Hydraulic oil, compressor oil, heat transfer fluids, hot oil, glycol

CARTRIDGE SEAL

PACKING

MECHANICAL SEAL

BEHIND THE ROTOR SEALLOCATION AVAILABLE

CUSTOMIZING Your Global Gear PumpGlobalGear Pumps are versatile and can be customized to meet the requirements of specific applications.

Optional Features:

• Relief Valves

• Seal Choices

• Heat Jackets

• Oversized and High

Pressure Flanges

• Abrasive Fluid

Special Construction

• High Temperature

Construction

FLANGE CHOICES

RELIEF VALVE

E n g i n e e r e d S o l u t i o n s

Model Max Nominal Flow RateRPM USGPM M3/HR

GG015 1200 10 @ 1150 RPM 2.8 @ 1450 RPMGG030 1200 20 @ 1150 RPM 5.7 @ 1450 RPMGG080 1000 40 @ 780 RPM 6.9 @ 920 RPMGG130 640 65 @ 520 RPM 9.1 @ 920 RPMGG210 520 110 @ 420 RPM 10.9 @ 920 RPMGG250 520 160 @ 520 RPM 36.3 @ 520 RPMGG550** 350 350 @ 350 RPM 80.0 @ 350 RPM

STAINLESS STEEL

CAST IRON AND CARBON STEEL

SPECIFICATIONS

Model Max Nominal Flow RateRPM USGPM M3/HR

GG015 1800 15 @ 1750 RPM 2.8 @ 1450 RPM

GG030 1800 30 @ 1750 RPM 5.7 @ 1450 RPM

GG050 1500 38 @ 1150 RPM 6.9 @ 920 RPM

GG070 1500 50 @ 1150 RPM 9.1 @ 920 RPM

GG080 1500 60 @ 1150 RPM 10.9 @ 920 RPM

GG090 1500 75 @ 1150 RPM 13.7 @ 920 RPM

GG120 1200 75 @ 780 RPM 20.0 @ 920 RPM

GG130 1000 100 @ 780 RPM 27.0 @ 920 RPM

GG200 1000 135 @ 640 RPM 31.0 @ 640 RPM

GG210 800 140 @ 520 RPM 32.0 @ 520 RPM

GG250 640 200 @ 640 RPM 45.4 @ 640 RPM

GG550 500 550 @ 500 RPM 124.5 @ 500 RPM

Pressures to 200 psi (13.8 bar)Temperatures to 600ºF (316ºC) Viscosities to 1,000,000 ssu (220,000 cst)

BACK PULL-OUTThe back pull-out design greatly reduces down-time forservice—the pump can be repaired without disturbing piping or shaft alignment.

Downtime

A. Typical time to replace complete pump

B. Typical time to replace GlobalGear®

drive module

Drive ModuleSpacer Coupling

A B

15 min.

60 min.

GlobalGear® builds on

a time-tested design and

more than 80 years of

gear pump engineering

experience. Capable of

tackling the toughest high-

viscosity applications, the

GlobalGear® Process Pump

handles everything from

bulk transfer, chocolate and

asphalt, to high-

temperature fluids and

chemical processing.

GlobalGear® uses

robust pump design

together with tougher and

stronger materials to make

the pump last longer. When

maintenance is required,

in-line seal maintenance

and back pull-out features

are available to make the

servicing of the pumps

quicker and easier.

The result?

An unbeatable pump

that offers unparalleled

performance.

GLO

BA

LGE

AR

®

PU

MP

S

TOUGH GEARSThe rotor and idler gears are made of toughmaterials, which canhandle the stresses of high-viscosity and high-pressure operation.No need for steel rotorupgrade.

STRONG SHAFTDESIGNModels employ high-strength shaftmaterials. This, alongwith oversized shaft diameters, ensures astrong, reliable shaft.

ROBUST BEARINGMaintenance FreeLube for Life

The Inside Reliability Story Behind GLOBALGEAR®

The Pump designed for you!

Tuthill’s GlobalGear® was developed based on customer input, and customer input in

the process industries clearly points to the need for better gear pump reliability and

specifically better seal reliability. The opportunity for better reliability is created by the

situation that many pumps applied on viscous liquids are fundamentally designed for

packing and later adapted to mechanical seals. In many cases, the seals being selected

were designed for use with water-like liquids. Pumps designed for packing combined

with mechanical seals designed for thin liquids are no match to offer extended

reliability with demanding viscous liquid applications.

GlobalGear®design features for extended seal life include:

• Oversized shaft and bearing diameters in sizes 120 thru 550

• Large bore size for stuffing boxes

• Pressurized fluid paths for seal lubrication

• Options for viscous liquid duty seals

GlobalGear® Pumps are TOUGHER AND MORE RELIABLE.

PATENTED LUBRICATION FEATURERevolutionary lubrication methodextends overall life byreducing friction.

Pressures to 150 psi (10.3 bar) **Pressures to 125 psi (8.6 bar)Temperatures to 500ºF (260ºC)Viscosities to 1,000,000 ssu (220,000 cst)Max differential pressure is 100 psi when fluid is less than 100 SSU

Introducing the HG VERSION GLOBALGEAR®, for the toughest of tough services.

THE CHALLENGE…Provide a pump that will:

• Handle side loads of belt drive and allow for the sheave to be mounted directly on the pump input shaft• Handle thrust loads associated with high system pressure• Handle cold starts where the temperature drops to minus 20°F • Withstand operation in a high vibration environment• Design for five year life with only scheduled preventative maintenance lubrication

Tuthill answers with the HG set of severe services upgrades:

• Interference fit, paired single row bearings capable of 80,000 hours B-10 life• Heavy duty hard face slurry type seals• Extra shaft length to accommodate belt sheave• Cartridge style drive module for bearing and seal renewal in minutes by a non-specialized crew

GlobalGear® Materials and Size Address a WIDER RANGE OF APPLICATIONS.

Model Max Nominal Flow RateRPM USGPM M3/HR

GG015 1800 15 @ 1750 RPM 2.8 @ 1450 RPMGG030 1800 30 @ 1750 RPM 5.7 @ 1450 RPMGG130 1000 100 @ 780 RPM 27.0 @ 920 RPMGG250 640 200 @ 640 RPM 45.4 @ 640 RPMGG550 500 550 @ 500 RPM 124.5 @ 500 RPM

CAST STEEL

TUFFSEALL™ HEAVY DUTY SLURRY SEAL

Heavy Duty Slurry Seal

PairedSingle RowBearings

Pressures to 200 psi (13.8 bar)Temperatures to 600ºF (316ºC) Viscosities to 1,000,000 ssu (220,000 cst)

Model Max Nominal Flow RateRPM USGPM M3/HR

GG015 1200 10 @ 1150 RPM 2.8 @ 1450 RPMGG030 1200 20 @ 1150 RPM 5.7 @ 1450 RPMGG080 1000 40 @ 780 RPM 6.9 @ 920 RPMGG130 640 65 @ 520 RPM 9.1 @ 920 RPMGG210 520 110 @ 420 RPM 10.9 @ 920 RPMGG250 520 160 @ 520 RPM 36.3 @ 520 RPMGG550** 350 350 @ 350 RPM 80.0 @ 350 RPM

STAINLESS STEEL

CAST IRON AND CARBON STEEL

SPECIFICATIONS

Model Max Nominal Flow RateRPM USGPM M3/HR

GG015 1800 15 @ 1750 RPM 2.8 @ 1450 RPM

GG030 1800 30 @ 1750 RPM 5.7 @ 1450 RPM

GG050 1500 38 @ 1150 RPM 6.9 @ 920 RPM

GG070 1500 50 @ 1150 RPM 9.1 @ 920 RPM

GG080 1500 60 @ 1150 RPM 10.9 @ 920 RPM

GG090 1500 75 @ 1150 RPM 13.7 @ 920 RPM

GG120 1200 75 @ 780 RPM 20.0 @ 920 RPM

GG130 1000 100 @ 780 RPM 27.0 @ 920 RPM

GG200 1000 135 @ 640 RPM 31.0 @ 640 RPM

GG210 800 140 @ 520 RPM 32.0 @ 520 RPM

GG250 640 200 @ 640 RPM 45.4 @ 640 RPM

GG550 500 550 @ 500 RPM 124.5 @ 500 RPM

Pressures to 200 psi (13.8 bar)Temperatures to 600ºF (316ºC) Viscosities to 1,000,000 ssu (220,000 cst)

BACK PULL-OUTThe back pull-out design greatly reduces down-time forservice—the pump can be repaired without disturbing piping or shaft alignment.

Downtime

A. Typical time to replace complete pump

B. Typical time to replace GlobalGear®

drive module

Drive ModuleSpacer Coupling

A B

15 min.

60 min.

GlobalGear® builds on

a time-tested design and

more than 80 years of

gear pump engineering

experience. Capable of

tackling the toughest high-

viscosity applications, the

GlobalGear® Process Pump

handles everything from

bulk transfer, chocolate and

asphalt, to high-

temperature fluids and

chemical processing.

GlobalGear® uses

robust pump design

together with tougher and

stronger materials to make

the pump last longer. When

maintenance is required,

in-line seal maintenance

and back pull-out features

are available to make the

servicing of the pumps

quicker and easier.

The result?

An unbeatable pump

that offers unparalleled

performance.

GLO

BA

LGE

AR

®

PU

MP

S

TOUGH GEARSThe rotor and idler gears are made of toughmaterials, which canhandle the stresses of high-viscosity and high-pressure operation.No need for steel rotorupgrade.

STRONG SHAFTDESIGNModels employ high-strength shaftmaterials. This, alongwith oversized shaft diameters, ensures astrong, reliable shaft.

ROBUST BEARINGMaintenance FreeLube for Life

The Inside Reliability Story Behind GLOBALGEAR®

The Pump designed for you!

Tuthill’s GlobalGear® was developed based on customer input, and customer input in

the process industries clearly points to the need for better gear pump reliability and

specifically better seal reliability. The opportunity for better reliability is created by the

situation that many pumps applied on viscous liquids are fundamentally designed for

packing and later adapted to mechanical seals. In many cases, the seals being selected

were designed for use with water-like liquids. Pumps designed for packing combined

with mechanical seals designed for thin liquids are no match to offer extended

reliability with demanding viscous liquid applications.

GlobalGear®design features for extended seal life include:

• Oversized shaft and bearing diameters in sizes 120 thru 550

• Large bore size for stuffing boxes

• Pressurized fluid paths for seal lubrication

• Options for viscous liquid duty seals

GlobalGear® Pumps are TOUGHER AND MORE RELIABLE.

PATENTED LUBRICATION FEATURERevolutionary lubrication methodextends overall life byreducing friction.

Pressures to 150 psi (10.3 bar) **Pressures to 125 psi (8.6 bar)Temperatures to 500ºF (260ºC)Viscosities to 1,000,000 ssu (220,000 cst)Max differential pressure is 100 psi when fluid is less than 100 SSU

Introducing the HG VERSION GLOBALGEAR®, for the toughest of tough services.

THE CHALLENGE…Provide a pump that will:

• Handle side loads of belt drive and allow for the sheave to be mounted directly on the pump input shaft• Handle thrust loads associated with high system pressure• Handle cold starts where the temperature drops to minus 20°F • Withstand operation in a high vibration environment• Design for five year life with only scheduled preventative maintenance lubrication

Tuthill answers with the HG set of severe services upgrades:

• Interference fit, paired single row bearings capable of 80,000 hours B-10 life• Heavy duty hard face slurry type seals• Extra shaft length to accommodate belt sheave• Cartridge style drive module for bearing and seal renewal in minutes by a non-specialized crew

GlobalGear® Materials and Size Address a WIDER RANGE OF APPLICATIONS.

Model Max Nominal Flow RateRPM USGPM M3/HR

GG015 1800 15 @ 1750 RPM 2.8 @ 1450 RPMGG030 1800 30 @ 1750 RPM 5.7 @ 1450 RPMGG130 1000 100 @ 780 RPM 27.0 @ 920 RPMGG250 640 200 @ 640 RPM 45.4 @ 640 RPMGG550 500 550 @ 500 RPM 124.5 @ 500 RPM

CAST STEEL

TUFFSEALL™ HEAVY DUTY SLURRY SEAL

Heavy Duty Slurry Seal

PairedSingle RowBearings

Pressures to 200 psi (13.8 bar)Temperatures to 600ºF (316ºC) Viscosities to 1,000,000 ssu (220,000 cst)

Model Max Nominal Flow RateRPM USGPM M3/HR

GG015 1200 10 @ 1150 RPM 2.8 @ 1450 RPMGG030 1200 20 @ 1150 RPM 5.7 @ 1450 RPMGG080 1000 40 @ 780 RPM 6.9 @ 920 RPMGG130 640 65 @ 520 RPM 9.1 @ 920 RPMGG210 520 110 @ 420 RPM 10.9 @ 920 RPMGG250 520 160 @ 520 RPM 36.3 @ 520 RPMGG550** 350 350 @ 350 RPM 80.0 @ 350 RPM

STAINLESS STEEL

CAST IRON AND CARBON STEEL

SPECIFICATIONS

Model Max Nominal Flow RateRPM USGPM M3/HR

GG015 1800 15 @ 1750 RPM 2.8 @ 1450 RPM

GG030 1800 30 @ 1750 RPM 5.7 @ 1450 RPM

GG050 1500 38 @ 1150 RPM 6.9 @ 920 RPM

GG070 1500 50 @ 1150 RPM 9.1 @ 920 RPM

GG080 1500 60 @ 1150 RPM 10.9 @ 920 RPM

GG090 1500 75 @ 1150 RPM 13.7 @ 920 RPM

GG120 1200 75 @ 780 RPM 20.0 @ 920 RPM

GG130 1000 100 @ 780 RPM 27.0 @ 920 RPM

GG200 1000 135 @ 640 RPM 31.0 @ 640 RPM

GG210 800 140 @ 520 RPM 32.0 @ 520 RPM

GG250 640 200 @ 640 RPM 45.4 @ 640 RPM

GG550 500 550 @ 500 RPM 124.5 @ 500 RPM

Pressures to 200 psi (13.8 bar)Temperatures to 600ºF (316ºC) Viscosities to 1,000,000 ssu (220,000 cst)

BACK PULL-OUTThe back pull-out design greatly reduces down-time forservice—the pump can be repaired without disturbing piping or shaft alignment.

Downtime

A. Typical time to replace complete pump

B. Typical time to replace GlobalGear®

drive module

Drive ModuleSpacer Coupling

A B

15 min.

60 min.

GlobalGear® builds on

a time-tested design and

more than 80 years of

gear pump engineering

experience. Capable of

tackling the toughest high-

viscosity applications, the

GlobalGear® Process Pump

handles everything from

bulk transfer, chocolate and

asphalt, to high-

temperature fluids and

chemical processing.

GlobalGear® uses

robust pump design

together with tougher and

stronger materials to make

the pump last longer. When

maintenance is required,

in-line seal maintenance

and back pull-out features

are available to make the

servicing of the pumps

quicker and easier.

The result?

An unbeatable pump

that offers unparalleled

performance.

GLO

BA

LGE

AR

®

PU

MP

S

TOUGH GEARSThe rotor and idler gears are made of toughmaterials, which canhandle the stresses of high-viscosity and high-pressure operation.No need for steel rotorupgrade.

STRONG SHAFTDESIGNModels employ high-strength shaftmaterials. This, alongwith oversized shaft diameters, ensures astrong, reliable shaft.

ROBUST BEARINGMaintenance FreeLube for Life

The Inside Reliability Story Behind GLOBALGEAR®

The Pump designed for you!

Tuthill’s GlobalGear® was developed based on customer input, and customer input in

the process industries clearly points to the need for better gear pump reliability and

specifically better seal reliability. The opportunity for better reliability is created by the

situation that many pumps applied on viscous liquids are fundamentally designed for

packing and later adapted to mechanical seals. In many cases, the seals being selected

were designed for use with water-like liquids. Pumps designed for packing combined

with mechanical seals designed for thin liquids are no match to offer extended

reliability with demanding viscous liquid applications.

GlobalGear®design features for extended seal life include:

• Oversized shaft and bearing diameters in sizes 120 thru 550

• Large bore size for stuffing boxes

• Pressurized fluid paths for seal lubrication

• Options for viscous liquid duty seals

GlobalGear® Pumps are TOUGHER AND MORE RELIABLE.

PATENTED LUBRICATION FEATURERevolutionary lubrication methodextends overall life byreducing friction.

Pressures to 150 psi (10.3 bar) **Pressures to 125 psi (8.6 bar)Temperatures to 500ºF (260ºC)Viscosities to 1,000,000 ssu (220,000 cst)Max differential pressure is 100 psi when fluid is less than 100 SSU

Introducing the HG VERSION GLOBALGEAR®, for the toughest of tough services.

THE CHALLENGE…Provide a pump that will:

• Handle side loads of belt drive and allow for the sheave to be mounted directly on the pump input shaft• Handle thrust loads associated with high system pressure• Handle cold starts where the temperature drops to minus 20°F • Withstand operation in a high vibration environment• Design for five year life with only scheduled preventative maintenance lubrication

Tuthill answers with the HG set of severe services upgrades:

• Interference fit, paired single row bearings capable of 80,000 hours B-10 life• Heavy duty hard face slurry type seals• Extra shaft length to accommodate belt sheave• Cartridge style drive module for bearing and seal renewal in minutes by a non-specialized crew

GlobalGear® Materials and Size Address a WIDER RANGE OF APPLICATIONS.

Model Max Nominal Flow RateRPM USGPM M3/HR

GG015 1800 15 @ 1750 RPM 2.8 @ 1450 RPMGG030 1800 30 @ 1750 RPM 5.7 @ 1450 RPMGG130 1000 100 @ 780 RPM 27.0 @ 920 RPMGG250 640 200 @ 640 RPM 45.4 @ 640 RPMGG550 500 550 @ 500 RPM 124.5 @ 500 RPM

CAST STEEL

TUFFSEALL™ HEAVY DUTY SLURRY SEAL

Heavy Duty Slurry Seal

PairedSingle RowBearings

Pressures to 200 psi (13.8 bar)Temperatures to 600ºF (316ºC) Viscosities to 1,000,000 ssu (220,000 cst)

A c h i e v i n g O p t i m um B a l a n c e f o r M a x i m um Va l u e

Tough Pumps wi thF ie ld Proven Re l iab i l i t y

ww

w.t

uthi

llpum

p.co

m For additional information, please visit:

www.tuthillpump.com

The Tech Info Library Includes

• Performance Curves

• Service Manuals

• Sample Guide Specifications

• Engineering Data Packs with Dimensions

and Design Information

Tuthill Pump Group

12500 South Pulaski Road

Alsip, Illinois 60803 USA

phone: 708-389-2500

Tuthill United Kingdom

Birkdale Close

Manners Industrial Estate

Ilkeston, Derbyshire DE7 8YA UK

phone: 44.0.115.932.5226

Tuthill China

88 Jia Xiu Road

Nan Xiang Town Jia Ding District

Shanghai, P.R.C. 201802 China

phone: 86.21.6917.1999

G L O B A L G E A R ® P R O C E S S P U M P

Tuthill tough. And flexible—for the way you work.

TUT12701 6/13

GlobalGear was introduced in 2001, and since then more than 12,000 pumps have been shipped to locations all over the world.

INDUSTRIES AND APPLICATIONS Where GlobalGear Pumps Have Been Applied

Chemical Processing: Polymers, resins, adhesives, glues, solvents, sodium hydroxide, magnesium hydroxide, phosphoric acid, plasticizers, pigments, catalysts, additives, polyvinyl alcohol, silicone oils

Petrochemical: API 676 rotary pumps, asphalt, grease, lube oil, motor oil, turbine oil, fuel oil, bunker C heavy fuel oil,diesel fuel, synthetic oils, odorant, additives, drilling support systems

Printing: Inks and pigments

Personal Products: Soap, detergents, surfactants, perfume, paraffin wax

Polyurethane Foam Manufacturing: Polyol, isocyanate, fire retardants

Pulp & Paper: Starch, clay coatings, tall oil

Paints & Coatings: Paint, stains, varnish, enamel, solvents

Construction Materials: Asphalt, filled asphalt, caulk, concrete additives

Agricultural Chemicals: Biocides, herbicides, urea

Aviation: Kerosene, Skydrol, glycol

Food & Beverage: Soybean oil, canola oil, hot fry oil, high fructose corn syrup, sucrose, glucose, molasses, honey, liquid sugars, chocolate, tallow, lard, peanut butter, caramel coloring, mustard

Energy & Power: Biodiesel, glycerin, waste oil

Package Systems: Hydraulic oil, compressor oil, heat transfer fluids, hot oil, glycol

CARTRIDGE SEAL

PACKING

MECHANICAL SEAL

BEHIND THE ROTOR SEALLOCATION AVAILABLE

CUSTOMIZING Your Global Gear PumpGlobalGear Pumps are versatile and can be customized to meet the requirements of specific applications.

Optional Features:

• Relief Valves

• Seal Choices

• Heat Jackets

• Oversized and High

Pressure Flanges

• Abrasive Fluid

Special Construction

• High Temperature

Construction

FLANGE CHOICES

RELIEF VALVE

Housing Ductile Iron

316 Stainless Steel

Housing Bearing DU*

Carbon

Faceplate Ductile Iron

316 Stainless Steel

Faceplate Bearing Outboard Ball Bearing

Impellers Ductile Iron

316 Stainless Steel

Shafts 17-4 Stainless Steel

Gear case Gray Iron

*BRONZE IN MODEL 330

E n g i n e e r e d S o l u t i o n s

H e a v y D u t y P u m p s f o r T o u g hA p p l i c a t i o n s

A c h i e v i n g O p t i m um B a l a n c e f o r M a x i m um Va l u e

General Applications:

1. Chemical Processing – Synthetic fibers and films,

superphosphoric acid, adhesives

2. Pulp and Paper – Black liquor soap, paper coatings

3. Construction Materials – Silicon caulk, wall board

taping compound, limestone filled asphalt for

roof shingles

4. Meat Processing – Ground meats, fats, casings,

byproducts for rendering, waste products

5. Food Processing – Chocolate, candy mass and gels,

peanut butter, corn syrup, molasses, lecithin,

sugar magma

6. Oil Exploration and Refining – Slop oil, API 674

reciprocating pumps, crude oil

7. Plastics Composite Parts Manufacturing –

Filled plastics molding compounds

8. Wastewater Treatment – Polymers, dissolved air

flotation skimming, scum, sludge

I N D U S T R I A L D U T Y P R O C E S S P U M P S

STANDARD MATERIALS OF CONSTRUCTION

1. Top impeller has started suction cycle and is

completing the discharge cycle. Lower impeller

is transferring liquid from the suction to the

discharge side of the pump.

2. Top impeller completes suction cycle.

Lower impeller starting to discharge.

3. Top impeller is transferring liquid from suction to

discharge. Lower impeller has started the suction

cycle and is finishing the discharge cycle.

4. Top impeller starting discharge cycle.

Lower impeller finishing suction cycle.

NO METAL-TO-METAL CONTACT IN THE COMPLETELY ISOLATED FLUID CHAMBER

1 2 3 4

ww

w.t

uth

illp

um

p.c

om

E n g i n e e r e d S o l u t i o n s

To find an authorized distributor, visit www.tuthillpump.com/distributors

Tuthill Pump Group12500 South Pulaski RoadAlsip, Illinois 60803 USAphone: 708-389-2500 / fax: 708-388-0869email: tuthillpump@tuthill.com

Tuthill Pump Group5143 Port Chicago HighwayConcord, California 94520 USAphone: 925-676-8000 / fax: 925-676-8151email: concord@tuthill.com

Tuthill Pump GroupBirkdale CloseManners Industrial EstateIlkeston, Derbyshire DE7 8YA Englandphone: 44.115.932.5226 / fax: 44.115.932.2526email: tuthillpumpuk@tuthill.com

Tuthill EuropeParc industriel Wavre NordAvenue Vésale, 30 - 1300 Wavre - Belgiumphone: 32 10 22 83 34 / fax: 32 10 23 82 40email: tld@tuthill.com

Tuthill Latin America255 Alhambra Circle, Suite 320Coral Gables, Florida 33134 USAphone: 305-740-3381 / fax: 305-740-9328email: tuthill.latinamerica@tuthill.com

Tuthill Australia19/21 Milton Park, 128 Canterbury RoadKilsyth, Victoria, 3137, Australiaphone: 61 3 9720 6533 / fax: 61 3 9720 6880email: asiapacific@tuthill.com.au

Tuthill ChinaRoom 1507, Harbour Ring PlazaNo. 18 Xi Zang Zhong RoadShanghai, 200001, P.R. Chinaphone: 86 21 53853369 / fax: 86 21 53853365 email: china@tuthill.com.cn

TUT12702 8/12

Developing new energy sources from bio-

fuels, coal, and waste products presents

special pumping challenges. Some of the

applications where HD pumps have been

applied include:

1. Biodiesel – Soybean soap stock

2. Ethanol – Spent mash

3. Coal water and coal oil slurries

4. Energy Recovery –

Waste oil burner feed

Tuthill HD Pumps are used in many diverse markets for challenging applications.

Below is a partial list of markets and applications served:

Tuthill offers the HD Series

for the most demanding

applications – slurries,

high viscosity products,

suspended solids, concen-

trated acids, chemicals,

high temperature liquids,

sludge, resins, sewage

and scum, paints,

polymers, plastics, pharma-

ceuticals, foods, and shear

sensitive fluids.

This Rotary Positive

Displacement,

Circumferential Piston

pump is Tuthill’s

severe-duty problem

solver. Heavy-Duty

Construction provides

longer life in

the toughest

pumping applications.

HD

PR

OC

ES

SP

UM

PS HD HEAVY DUTY

CIRCUMFERENTIAL PISTON PUMPS

A CLASSIC DESIGN WITH LEGENDARY PERFORMANCE

The secret behind the HD’s success is external bearing support on both sides of the

impellers which enables the pump to handle high pressure, and pressure spikes

associated with sudden surges of viscous mass. The load diagrams below show the

rigid HD design compared to cantilevered designs with shaft deflections that can

result in galling and seizing of the pump.

External timing gears in separate oil filled reservoir

provide safe, non-contact synchronous impeller action.

Oil lubricated roller bearings provide support for maximum radial

loading in models 70A, 120A, 330 and 600.

Constant diameter shafts (no steps in torque transmission areas) for

maximum strength and minimum deflection.

Housing bushing, positioned under maximum radial load, assuring

minimum shaft deflection.

A selection of sealing solutions is offered including Tuffseall,

heavy duty mechanical seals, and packing.

Impellers provided in single lobe or double lobe design.

No metal to metal contact in the fluid chamber.

Housing and gear case are foot mounted to minimize

distortion and vibration.

Heavy duty, grease lubricated, double-row ball bearings for

combined radial loading and axial positioning.

Casings and gear case are precision machined and dowel pin

aligned. Procedure results in full interchangeability should field

replacement be required.

DOUBLE LOBE IMPELLERS

SINGLE LOBEIMPELLERSSingle lobe impellers provide maximum strength for highly viscous fluidsand slurries, and high discharge pressure as wellas minimal shear charac-teristics on the fluids.

EXTERNAL TIMING GEARSUse of timing gears eliminates metal to metal contact in the fluidchamber, reduces shear,and allows intermittent run dry without damage to the pump.

PORT SIZE PER MAX. DIFF. MAX. RPMT1 T2 100 REV. PRESSURE � PUMPING CP D L N O U X Y Z WEIGHT

MODEL IN. MM IN. MM GAL. LTR. PSI BAR ELEMENT � IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM LBS. KG.

30A 11/2 38 11/2 38 5.5 21 150 10.3 450 183/4 476 53/4 146 105/8 270 21/8 54 87/8 225 1 25 4 102 31/8 79 11/4 32 100 45

70A 3 76 2 51 15.0 57 450 31.0 450 243/8 619 81/2 216 125/8 321 31/2 89 131/4 337 17/8 48 61/4 159 43/4 121 21/2 64 280 127

120A 4 102 3 76 30.0 114 450 31.0 450 243/8 619 81/2 216 123/8 314 31/2 89 131/4 337 17/8 48 61/4 159 43/4 121 21/2 64 300 136

330 5 127 4 102 70.0 265 500 31.0 450 295/16 745 103/4 273 141/4 362 4 102 167/8 429 21/4 57 77/8 200 61/8 156 33/16 81 550 249

MODELS 30A, 2A, 3A, 70A, 120A & 330

MODEL 600

� CAUTION: THE FLUID BEING PUMPED MUST ALWAYS BE SPECIFIED. APPLICATIONS ABOVE 200 PSI/13.8 BAR, 350ºF/177ºC, OR 200 RPM MUST BE REVIEWED BY TUTHILL TO INSURE PROPER PUMP SELECTION.

� CAUTION: THE FLUID BEING PUMPED MUST ALWAYS BE SPECIFIED. APPLICATIONS ABOVE 200 PSI/13.8 BAR,350ºF/177ºC, OR 200 RPM MUST BE REVIEWED BY TUTHILL TO INSURE PROPER PUMP SELECTION.

� SUCTION AND DISCHARGE PORTS CAN BE REVERSED BY CHANGING SHAFT ROTATION

PORT SIZE PER MAX. DIFF. MAX. RPMT1 T2 100 REV. PRESSURE � PUMPING CP D L N O U X Y Z WEIGHT

MODEL IN. MM IN. MM GAL. LTR. PSI BAR ELEMENT � IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM LBS. KG.

600 6 152 6 152 148.0 560 450 31.0 450 369/16 929 133/4 349 189/16 471 57/16 138 201/4 514 21/2 64 9 229 9 229 31/2 89 900 408

MORE RECENT HD PUMP SEALING INNOVATIONS

Tuffseall™ cartridge lip seal technology has been successfully

applied to a number of HD pump applications to address the

requirements of leak free performance with intermittent run dry

conditions. Optional power monitors are offered as run dry

protection, and are recommended for use with single mechanical

seals where run dry conditions are possible.

Sealing Choices:

CUSTOMIZING YOUR HD PUMP

HD Pumps are very versatile and can be customized

to meet the requirements of specific applications.

Optional Features:• Heat Jackets

• Relief Valves

• Double Lobe Impellers for reduced pulsations with thin liquids

• Flanges including high pressure flanges

• Special Clearances

• High Temperature Construction

• Abrasive Fluid Special Construction

• Seal Choices

HD with bearing supporton both sides of impellers

Cantilevered designs andresulting shaft deflection

Performance Ranges:

Flow: Up to 650 GPM

Pressure: Up to 500 psi

Viscosity: Up to 4,400,000 cts

Temperature: Up to 525°F

Self Priming: Up to 14 feet

HEAVY DUTYSLURRY SERVICEMECHANICAL SEAL• Standard PTFE/graphite packing

• Food grade packing

• Packing with flush arrangements

• Tuffseall™

• Single or double slurry seals

• Solvent compatible o-rings

• Engineered packing or seal solutions

TUFFSEALLTM

has no springs to clogand no dynamic o-rings.

TUFFSEALLTM

features a positive drive,and wear resistant siliconcarbide sleeve.

Tuthill offers the HD Series

for the most demanding

applications – slurries,

high viscosity products,

suspended solids, concen-

trated acids, chemicals,

high temperature liquids,

sludge, resins, sewage

and scum, paints,

polymers, plastics, pharma-

ceuticals, foods, and shear

sensitive fluids.

This Rotary Positive

Displacement,

Circumferential Piston

pump is Tuthill’s

severe-duty problem

solver. Heavy-Duty

Construction provides

longer life in

the toughest

pumping applications.

HD

PR

OC

ES

SP

UM

PS HD HEAVY DUTY

CIRCUMFERENTIAL PISTON PUMPS

A CLASSIC DESIGN WITH LEGENDARY PERFORMANCE

The secret behind the HD’s success is external bearing support on both sides of the

impellers which enables the pump to handle high pressure, and pressure spikes

associated with sudden surges of viscous mass. The load diagrams below show the

rigid HD design compared to cantilevered designs with shaft deflections that can

result in galling and seizing of the pump.

External timing gears in separate oil filled reservoir

provide safe, non-contact synchronous impeller action.

Oil lubricated roller bearings provide support for maximum radial

loading in models 70A, 120A, 330 and 600.

Constant diameter shafts (no steps in torque transmission areas) for

maximum strength and minimum deflection.

Housing bushing, positioned under maximum radial load, assuring

minimum shaft deflection.

A selection of sealing solutions is offered including Tuffseall,

heavy duty mechanical seals, and packing.

Impellers provided in single lobe or double lobe design.

No metal to metal contact in the fluid chamber.

Housing and gear case are foot mounted to minimize

distortion and vibration.

Heavy duty, grease lubricated, double-row ball bearings for

combined radial loading and axial positioning.

Casings and gear case are precision machined and dowel pin

aligned. Procedure results in full interchangeability should field

replacement be required.

DOUBLE LOBE IMPELLERS

SINGLE LOBEIMPELLERSSingle lobe impellers provide maximum strength for highly viscous fluidsand slurries, and high discharge pressure as wellas minimal shear charac-teristics on the fluids.

EXTERNAL TIMING GEARSUse of timing gears eliminates metal to metal contact in the fluidchamber, reduces shear,and allows intermittent run dry without damage to the pump.

PORT SIZE PER MAX. DIFF. MAX. RPMT1 T2 100 REV. PRESSURE � PUMPING CP D L N O U X Y Z WEIGHT

MODEL IN. MM IN. MM GAL. LTR. PSI BAR ELEMENT � IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM LBS. KG.

30A 11/2 38 11/2 38 5.5 21 150 10.3 450 183/4 476 53/4 146 105/8 270 21/8 54 87/8 225 1 25 4 102 31/8 79 11/4 32 100 45

70A 3 76 2 51 15.0 57 450 31.0 450 243/8 619 81/2 216 125/8 321 31/2 89 131/4 337 17/8 48 61/4 159 43/4 121 21/2 64 280 127

120A 4 102 3 76 30.0 114 450 31.0 450 243/8 619 81/2 216 123/8 314 31/2 89 131/4 337 17/8 48 61/4 159 43/4 121 21/2 64 300 136

330 5 127 4 102 70.0 265 500 31.0 450 295/16 745 103/4 273 141/4 362 4 102 167/8 429 21/4 57 77/8 200 61/8 156 33/16 81 550 249

MODELS 30A, 2A, 3A, 70A, 120A & 330

MODEL 600

� CAUTION: THE FLUID BEING PUMPED MUST ALWAYS BE SPECIFIED. APPLICATIONS ABOVE 200 PSI/13.8 BAR, 350ºF/177ºC, OR 200 RPM MUST BE REVIEWED BY TUTHILL TO INSURE PROPER PUMP SELECTION.

� CAUTION: THE FLUID BEING PUMPED MUST ALWAYS BE SPECIFIED. APPLICATIONS ABOVE 200 PSI/13.8 BAR,350ºF/177ºC, OR 200 RPM MUST BE REVIEWED BY TUTHILL TO INSURE PROPER PUMP SELECTION.

� SUCTION AND DISCHARGE PORTS CAN BE REVERSED BY CHANGING SHAFT ROTATION

PORT SIZE PER MAX. DIFF. MAX. RPMT1 T2 100 REV. PRESSURE � PUMPING CP D L N O U X Y Z WEIGHT

MODEL IN. MM IN. MM GAL. LTR. PSI BAR ELEMENT � IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM LBS. KG.

600 6 152 6 152 148.0 560 450 31.0 450 369/16 929 133/4 349 189/16 471 57/16 138 201/4 514 21/2 64 9 229 9 229 31/2 89 900 408

MORE RECENT HD PUMP SEALING INNOVATIONS

Tuffseall™ cartridge lip seal technology has been successfully

applied to a number of HD pump applications to address the

requirements of leak free performance with intermittent run dry

conditions. Optional power monitors are offered as run dry

protection, and are recommended for use with single mechanical

seals where run dry conditions are possible.

Sealing Choices:

CUSTOMIZING YOUR HD PUMP

HD Pumps are very versatile and can be customized

to meet the requirements of specific applications.

Optional Features:• Heat Jackets

• Relief Valves

• Double Lobe Impellers for reduced pulsations with thin liquids

• Flanges including high pressure flanges

• Special Clearances

• High Temperature Construction

• Abrasive Fluid Special Construction

• Seal Choices

HD with bearing supporton both sides of impellers

Cantilevered designs andresulting shaft deflection

Performance Ranges:

Flow: Up to 650 GPM

Pressure: Up to 500 psi

Viscosity: Up to 4,400,000 cts

Temperature: Up to 525°F

Self Priming: Up to 14 feet

HEAVY DUTYSLURRY SERVICEMECHANICAL SEAL• Standard PTFE/graphite packing

• Food grade packing

• Packing with flush arrangements

• Tuffseall™

• Single or double slurry seals

• Solvent compatible o-rings

• Engineered packing or seal solutions

TUFFSEALLTM

has no springs to clogand no dynamic o-rings.

TUFFSEALLTM

features a positive drive,and wear resistant siliconcarbide sleeve.

Tuthill offers the HD Series

for the most demanding

applications – slurries,

high viscosity products,

suspended solids, concen-

trated acids, chemicals,

high temperature liquids,

sludge, resins, sewage

and scum, paints,

polymers, plastics, pharma-

ceuticals, foods, and shear

sensitive fluids.

This Rotary Positive

Displacement,

Circumferential Piston

pump is Tuthill’s

severe-duty problem

solver. Heavy-Duty

Construction provides

longer life in

the toughest

pumping applications.

HD

PR

OC

ES

SP

UM

PS HD HEAVY DUTY

CIRCUMFERENTIAL PISTON PUMPS

A CLASSIC DESIGN WITH LEGENDARY PERFORMANCE

The secret behind the HD’s success is external bearing support on both sides of the

impellers which enables the pump to handle high pressure, and pressure spikes

associated with sudden surges of viscous mass. The load diagrams below show the

rigid HD design compared to cantilevered designs with shaft deflections that can

result in galling and seizing of the pump.

External timing gears in separate oil filled reservoir

provide safe, non-contact synchronous impeller action.

Oil lubricated roller bearings provide support for maximum radial

loading in models 70A, 120A, 330 and 600.

Constant diameter shafts (no steps in torque transmission areas) for

maximum strength and minimum deflection.

Housing bushing, positioned under maximum radial load, assuring

minimum shaft deflection.

A selection of sealing solutions is offered including Tuffseall,

heavy duty mechanical seals, and packing.

Impellers provided in single lobe or double lobe design.

No metal to metal contact in the fluid chamber.

Housing and gear case are foot mounted to minimize

distortion and vibration.

Heavy duty, grease lubricated, double-row ball bearings for

combined radial loading and axial positioning.

Casings and gear case are precision machined and dowel pin

aligned. Procedure results in full interchangeability should field

replacement be required.

DOUBLE LOBE IMPELLERS

SINGLE LOBEIMPELLERSSingle lobe impellers provide maximum strength for highly viscous fluidsand slurries, and high discharge pressure as wellas minimal shear charac-teristics on the fluids.

EXTERNAL TIMING GEARSUse of timing gears eliminates metal to metal contact in the fluidchamber, reduces shear,and allows intermittent run dry without damage to the pump.

PORT SIZE PER MAX. DIFF. MAX. RPMT1 T2 100 REV. PRESSURE � PUMPING CP D L N O U X Y Z WEIGHT

MODEL IN. MM IN. MM GAL. LTR. PSI BAR ELEMENT � IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM LBS. KG.

30A 11/2 38 11/2 38 5.5 21 150 10.3 450 183/4 476 53/4 146 105/8 270 21/8 54 87/8 225 1 25 4 102 31/8 79 11/4 32 100 45

70A 3 76 2 51 15.0 57 450 31.0 450 243/8 619 81/2 216 125/8 321 31/2 89 131/4 337 17/8 48 61/4 159 43/4 121 21/2 64 280 127

120A 4 102 3 76 30.0 114 450 31.0 450 243/8 619 81/2 216 123/8 314 31/2 89 131/4 337 17/8 48 61/4 159 43/4 121 21/2 64 300 136

330 5 127 4 102 70.0 265 500 31.0 450 295/16 745 103/4 273 141/4 362 4 102 167/8 429 21/4 57 77/8 200 61/8 156 33/16 81 550 249

MODELS 30A, 2A, 3A, 70A, 120A & 330

MODEL 600

� CAUTION: THE FLUID BEING PUMPED MUST ALWAYS BE SPECIFIED. APPLICATIONS ABOVE 200 PSI/13.8 BAR, 350ºF/177ºC, OR 200 RPM MUST BE REVIEWED BY TUTHILL TO INSURE PROPER PUMP SELECTION.

� CAUTION: THE FLUID BEING PUMPED MUST ALWAYS BE SPECIFIED. APPLICATIONS ABOVE 200 PSI/13.8 BAR,350ºF/177ºC, OR 200 RPM MUST BE REVIEWED BY TUTHILL TO INSURE PROPER PUMP SELECTION.

� SUCTION AND DISCHARGE PORTS CAN BE REVERSED BY CHANGING SHAFT ROTATION

PORT SIZE PER MAX. DIFF. MAX. RPMT1 T2 100 REV. PRESSURE � PUMPING CP D L N O U X Y Z WEIGHT

MODEL IN. MM IN. MM GAL. LTR. PSI BAR ELEMENT � IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM LBS. KG.

600 6 152 6 152 148.0 560 450 31.0 450 369/16 929 133/4 349 189/16 471 57/16 138 201/4 514 21/2 64 9 229 9 229 31/2 89 900 408

MORE RECENT HD PUMP SEALING INNOVATIONS

Tuffseall™ cartridge lip seal technology has been successfully

applied to a number of HD pump applications to address the

requirements of leak free performance with intermittent run dry

conditions. Optional power monitors are offered as run dry

protection, and are recommended for use with single mechanical

seals where run dry conditions are possible.

Sealing Choices:

CUSTOMIZING YOUR HD PUMP

HD Pumps are very versatile and can be customized

to meet the requirements of specific applications.

Optional Features:• Heat Jackets

• Relief Valves

• Double Lobe Impellers for reduced pulsations with thin liquids

• Flanges including high pressure flanges

• Special Clearances

• High Temperature Construction

• Abrasive Fluid Special Construction

• Seal Choices

HD with bearing supporton both sides of impellers

Cantilevered designs andresulting shaft deflection

Performance Ranges:

Flow: Up to 650 GPM

Pressure: Up to 500 psi

Viscosity: Up to 4,400,000 cts

Temperature: Up to 525°F

Self Priming: Up to 14 feet

HEAVY DUTYSLURRY SERVICEMECHANICAL SEAL• Standard PTFE/graphite packing

• Food grade packing

• Packing with flush arrangements

• Tuffseall™

• Single or double slurry seals

• Solvent compatible o-rings

• Engineered packing or seal solutions

TUFFSEALLTM

has no springs to clogand no dynamic o-rings.

TUFFSEALLTM

features a positive drive,and wear resistant siliconcarbide sleeve.

Housing Ductile Iron

316 Stainless Steel

Housing Bearing DU*

Carbon

Faceplate Ductile Iron

316 Stainless Steel

Faceplate Bearing Outboard Ball Bearing

Impellers Ductile Iron

316 Stainless Steel

Shafts 17-4 Stainless Steel

Gear case Gray Iron

*BRONZE IN MODEL 330

E n g i n e e r e d S o l u t i o n s

H e a v y D u t y P u m p s f o r T o u g hA p p l i c a t i o n s

A c h i e v i n g O p t i m um B a l a n c e f o r M a x i m um Va l u e

General Applications:

1. Chemical Processing – Synthetic fibers and films,

superphosphoric acid, adhesives

2. Pulp and Paper – Black liquor soap, paper coatings

3. Construction Materials – Silicon caulk, wall board

taping compound, limestone filled asphalt for

roof shingles

4. Meat Processing – Ground meats, fats, casings,

byproducts for rendering, waste products

5. Food Processing – Chocolate, candy mass and gels,

peanut butter, corn syrup, molasses, lecithin,

sugar magma

6. Oil Exploration and Refining – Slop oil, API 674

reciprocating pumps, crude oil

7. Plastics Composite Parts Manufacturing –

Filled plastics molding compounds

8. Wastewater Treatment – Polymers, dissolved air

flotation skimming, scum, sludge

I N D U S T R I A L D U T Y P R O C E S S P U M P S

STANDARD MATERIALS OF CONSTRUCTION

1. Top impeller has started suction cycle and is

completing the discharge cycle. Lower impeller

is transferring liquid from the suction to the

discharge side of the pump.

2. Top impeller completes suction cycle.

Lower impeller starting to discharge.

3. Top impeller is transferring liquid from suction to

discharge. Lower impeller has started the suction

cycle and is finishing the discharge cycle.

4. Top impeller starting discharge cycle.

Lower impeller finishing suction cycle.

NO METAL-TO-METAL CONTACT IN THE COMPLETELY ISOLATED FLUID CHAMBER

1 2 3 4

ww

w.t

uth

illp

um

p.c

om

E n g i n e e r e d S o l u t i o n s

To find an authorized distributor, visit www.tuthillpump.com/distributors

Tuthill Pump Group12500 South Pulaski RoadAlsip, Illinois 60803 USAphone: 708-389-2500 / fax: 708-388-0869email: tuthillpump@tuthill.com

Tuthill Pump Group5143 Port Chicago HighwayConcord, California 94520 USAphone: 925-676-8000 / fax: 925-676-8151email: concord@tuthill.com

Tuthill Pump GroupBirkdale CloseManners Industrial EstateIlkeston, Derbyshire DE7 8YA Englandphone: 44.115.932.5226 / fax: 44.115.932.2526email: tuthillpumpuk@tuthill.com

Tuthill EuropeParc industriel Wavre NordAvenue Vésale, 30 - 1300 Wavre - Belgiumphone: 32 10 22 83 34 / fax: 32 10 23 82 40email: tld@tuthill.com

Tuthill Latin America255 Alhambra Circle, Suite 320Coral Gables, Florida 33134 USAphone: 305-740-3381 / fax: 305-740-9328email: tuthill.latinamerica@tuthill.com

Tuthill Australia19/21 Milton Park, 128 Canterbury RoadKilsyth, Victoria, 3137, Australiaphone: 61 3 9720 6533 / fax: 61 3 9720 6880email: asiapacific@tuthill.com.au

Tuthill ChinaRoom 1507, Harbour Ring PlazaNo. 18 Xi Zang Zhong RoadShanghai, 200001, P.R. Chinaphone: 86 21 53853369 / fax: 86 21 53853365 email: china@tuthill.com.cn

TUT12702 8/12

Developing new energy sources from bio-

fuels, coal, and waste products presents

special pumping challenges. Some of the

applications where HD pumps have been

applied include:

1. Biodiesel – Soybean soap stock

2. Ethanol – Spent mash

3. Coal water and coal oil slurries

4. Energy Recovery –

Waste oil burner feed

Tuthill HD Pumps are used in many diverse markets for challenging applications.

Below is a partial list of markets and applications served:

Housing Ductile Iron

316 Stainless Steel

Housing Bearing DU*

Carbon

Faceplate Ductile Iron

316 Stainless Steel

Faceplate Bearing Outboard Ball Bearing

Impellers Ductile Iron

316 Stainless Steel

Shafts 17-4 Stainless Steel

Gear case Gray Iron

*BRONZE IN MODEL 330

E n g i n e e r e d S o l u t i o n s

H e a v y D u t y P u m p s f o r T o u g hA p p l i c a t i o n s

A c h i e v i n g O p t i m um B a l a n c e f o r M a x i m um Va l u e

General Applications:

1. Chemical Processing – Synthetic fibers and films,

superphosphoric acid, adhesives

2. Pulp and Paper – Black liquor soap, paper coatings

3. Construction Materials – Silicon caulk, wall board

taping compound, limestone filled asphalt for

roof shingles

4. Meat Processing – Ground meats, fats, casings,

byproducts for rendering, waste products

5. Food Processing – Chocolate, candy mass and gels,

peanut butter, corn syrup, molasses, lecithin,

sugar magma

6. Oil Exploration and Refining – Slop oil, API 674

reciprocating pumps, crude oil

7. Plastics Composite Parts Manufacturing –

Filled plastics molding compounds

8. Wastewater Treatment – Polymers, dissolved air

flotation skimming, scum, sludge

I N D U S T R I A L D U T Y P R O C E S S P U M P S

STANDARD MATERIALS OF CONSTRUCTION

1. Top impeller has started suction cycle and is

completing the discharge cycle. Lower impeller

is transferring liquid from the suction to the

discharge side of the pump.

2. Top impeller completes suction cycle.

Lower impeller starting to discharge.

3. Top impeller is transferring liquid from suction to

discharge. Lower impeller has started the suction

cycle and is finishing the discharge cycle.

4. Top impeller starting discharge cycle.

Lower impeller finishing suction cycle.

NO METAL-TO-METAL CONTACT IN THE COMPLETELY ISOLATED FLUID CHAMBER

1 2 3 4

ww

w.t

uth

illp

um

p.c

om

E n g i n e e r e d S o l u t i o n s

To find an authorized distributor, visit www.tuthillpump.com/distributors

Tuthill Pump Group12500 South Pulaski RoadAlsip, Illinois 60803 USAphone: 708-389-2500 / fax: 708-388-0869email: tuthillpump@tuthill.com

Tuthill Pump Group5143 Port Chicago HighwayConcord, California 94520 USAphone: 925-676-8000 / fax: 925-676-8151email: concord@tuthill.com

Tuthill Pump GroupBirkdale CloseManners Industrial EstateIlkeston, Derbyshire DE7 8YA Englandphone: 44.115.932.5226 / fax: 44.115.932.2526email: tuthillpumpuk@tuthill.com

Tuthill EuropeParc industriel Wavre NordAvenue Vésale, 30 - 1300 Wavre - Belgiumphone: 32 10 22 83 34 / fax: 32 10 23 82 40email: tld@tuthill.com

Tuthill Latin America255 Alhambra Circle, Suite 320Coral Gables, Florida 33134 USAphone: 305-740-3381 / fax: 305-740-9328email: tuthill.latinamerica@tuthill.com

Tuthill Australia19/21 Milton Park, 128 Canterbury RoadKilsyth, Victoria, 3137, Australiaphone: 61 3 9720 6533 / fax: 61 3 9720 6880email: asiapacific@tuthill.com.au

Tuthill ChinaRoom 1507, Harbour Ring PlazaNo. 18 Xi Zang Zhong RoadShanghai, 200001, P.R. Chinaphone: 86 21 53853369 / fax: 86 21 53853365 email: china@tuthill.com.cn

TUT12702 8/12

Developing new energy sources from bio-

fuels, coal, and waste products presents

special pumping challenges. Some of the

applications where HD pumps have been

applied include:

1. Biodiesel – Soybean soap stock

2. Ethanol – Spent mash

3. Coal water and coal oil slurries

4. Energy Recovery –

Waste oil burner feed

Tuthill HD Pumps are used in many diverse markets for challenging applications.

Below is a partial list of markets and applications served:

M S

ER

IES

PU

MP

S

Applications

Difficult to seal liquids such as:Isocyanate, Styrene, Sodium Hydroxide

Hazardous liquids such as:Nitrocellulose

Liquids carrying toxic vapors,solvents, etc.

Suitable for working environments where no leakage can be tolerated

Tuthill’s M Series magnetic coupled pumps feature a robust design to better withstand the unexpected.

Process upsets and cold starts can result in decoupling and permanent magnet damage that results in costly repairs and unplanned downtime. Using generously sized high temperature magnets can often prevent this situation. That is what Tuthill delivers in the M series magnetically coupled sealless process pumps. With more robust components andsuperior engineering, these pumps are much less likely todecouple in upset, cold or high viscosity situations. Even in the event of decoupling or run dry, our high temperature magnets are more likely to survive than standard low temp-erature magnets found in other pumps. Invest in a betterpump to avoid those costly magnetic drive pump repairs.

12500 South Pulaski RoadAlsip, Illinois 60803 USAphone: 708-389-2500 fax: 708-388-0869 email: tuthillpump@tuthill.comw w w. t u t h i l l p u m p . c o mE n g i n e e r e d S o l u t i o n s

Flow Capacities .5 to 80 GPM (.11 to 18.2 m3/hr)

Pressure Up to 500 psi (see model chart)

Viscosity up to 75,000 ssu (16,500 centistokes)

Temperature 300°F (149°C) standard construction 500 °F (260°C) high temperature construction

Sealless ConstructionNo mechanical seals or shaft packing to maintain.

12500 South Pulaski Road

Alsip, Illinois 60803 USA

phone: 708-389-2500

fax: 708-388-0869

email: tuthillpump@tuthill.com

w w w. t u t h i l l p u m p . c o mE n g i n e e r e d S o l u t i o n s

M S

ER

IES

PU

MP

S

Pump Max Max Max Port Magnet StrengthSize GPM m3/hr PSI Construction Mounting Size Ports Ft-lbs

ML0I 1.8 0.4 500 Iron Close-coupled .5” NPT Opposite 8.5

ML1I 3.2 0.7 500 Iron Close-coupled .5” NPT Opposite 8.5

ML2I 6.2 1.4 500 Iron Close-coupled 1” NPT Opposite 8.5

MC2I 9 2.0 100 Iron Close-coupled 1” NPT Top 18

MC3I 18 4.1 100 Iron Close-coupled 1.25” NPT Top 18

MC4I 36 8.2 100 Iron Close-coupled 1.5” NPT Top 18

MC5I 62 14.1 100 Iron Close-coupled 1.5” NPT Top 90

MC6I 84 19.1 100 Iron Close-coupled 2” NPT Top 90

MG015I 15 3.4 200 Iron Base mounted 1.5” NPT/BSP Opposite 18

MG030I 30 6.8 200 Iron Base mounted 1.5” NPT/BSP Opposite 18

MG080I 80 18.2 200 Iron Base mounted 2” 125# ANSI/ISO Opposite 90

MG015S 12 2.7 150 Stainless Base mounted 1.5” NPT/BSP Opposite 18

MG030S 22 5.0 150 Stainless Base mounted 1.5” NPT/BSP Opposite 18

MG080S 56 12.7 150 Stainless Base mounted 2” 150# ANSI/ISO Opposite 90

Drive Arrangements: Direct Drive Speeds Available to 1750 RPM

Compact close-coupled arrangement for ML and MC models

Gear reduced arrangements available for the MG models

Materials of Construction:Cast Iron or Stainless Steel Wetted Parts (See model chart)

Stainless Steel Inner Magnet Assembly and Containment Shell

Samarium Cobalt High Temperature Rare Earth Magnets

Carbon Bushings

PTFE Encapsulated Viton O-Rings

Features:Generously Sized Magnetic Couplings (Helps Avoid Upset Condition Decoupling)

High Temperature Rare Earth Magnets Supplied As Standard(Better Withstands Temperature Spikes Seen in Upset Conditions)

Patented Magnet Area Cooling Path for Effective Heat Dissipation

Thrust Control for Maximum Life and Reliability

Skid Rings to Prevent Containment Shell Damage

Options: Relief Valves, High Temperature Pump Construction to500 °F (260°C), Optional O-Ring Materials

Pump RotorInner Magnet

Outer Magnet

Containment Shell

Internal Circulation Path