Tutorial Pendant « Tamiko» © par PUCA®
Made by Puca
2019 © Puca
www.perlepuca.canalblog.com PUCA© All rights reserved
1) Pick up 1 R11, 1 Télos,
1 Samos, 1 R11, thread like picture
2) Repeat until you have
used a total of 4 télos
3) Exit through Samos
4) Thread through the second hole of Samos
5) Pick up 1 R11 between each Samos
6) You will now have this.
Exit through R11
Material :
• 16 Télos® par Puca®
• 16 Samos® par Puca®
• 16 round beads 3mm (PR3)
• 20 Bicones 4mm (T4)
• Seed beads 15/0 (R15), 11/0 (R11), 8/0 (R8)
• 1 Teardrop or Tassel of your choice
• 1 bail
• 2 rings 0.4ø
• Thread 0.12mm
7) Pick up 1 PR3 like picture
8) Pass again through
PR3, R11, Samos and next
R11
9) Repeat steps 7 and 8
until you have used a
total of 4 round beads.
Exit through R11
10) Pick up 3 R15, 1 T4, 3 R15 making a loop into the R11, exit through the next PR3
11) Repeat step 10 for
the 4 corners and exit
through T4
12) Pick up 4 R15, exit
through Télos
13) Pick up 4 R15, exit through T4
14) Repeat steps 12 and
13 on the other side
15) You will now have this
Repeat steps 12 to 14 for
the 4 corners
16) You will now have this. Thread 3 other elements, don’t cut your threads
17) Exit like picture
Let’s put together the 4
elements
18) Pick up 1 R11, exit
through T4 of the second
element
19) Pick up 4 R11 for the other elements and tighten
20) You will now have this
21) Exit through T4 like
picture
22) Pick up 1 R15, 1 T4, 1 R15, exit through T4 of the other element
23) Pick up 1 R11, exit
through T4
24) Pass through all the
beads to tighten, repeat
for the 4 sides
25) For the corner, pick up 2 R15, 1R8, 2 R15, tighten
26) You will now have
this. Repeat step 25 for
the opposite corner
27) You will now have this
28) Add your rings through R8 to place your teardrop and bail
29) Congratulations! Your
have finished your
pendant
30) Another idea, you can
create a bracelet with one
element and chain
Happy beading!
Thank you for respecting my work ©