TVET CERTIFICATE V in MANUFACTURING WELDING · CV Curriculum Vitae ICT Information Communication...

5 TVET CERTIFICATE V

in

MANUFACTURING WELDING

CODE

MGMWLD5001 Kigali November 2014

2 | P a g e

MGMWLD5001-TVET CERTIFICATE V

Manufacturing Welding

REQF Level 5 CURRICULUM

i | P a g e

© Workforce Development Authority, 2014

Copies available from:

Workforce Development Authority (WDA)

P. O. BOX 2707 Kigali

Tel: (+250) 255113365

Fax: (+250) 255113365

Email: [email protected]

Web: www.wda.gov.rw

Original published version updated:

November, 2014

ii | P a g e

Copyright

The Competent Development Body of this Curriculum is © Workforce Development Authority

(WDA). Reproduced with permission.

The following copyright warning applies to the material from the Training Package:

All rights reserved. This work has been produced initially with WDA. This work is copyright, but

permission is given to trainers and teachers to make copies by photocopying or other

duplicating processes for use with their own training organizations or in a workplace where the

training is being conducted. This permission does not extend to the making of copies for use

outside the immediate training environment for which they are made, nor the making of copies

for hire or resale to third parties. The views expressed in this version of the work do not

necessarily represent the views of WDA. The competent Body does not give warranty nor

accept any liability.

The WDA owns the copyright on all Curricula. Schools may reproduce this program in part or in

full for bona fide study or classroom purposes only. Acknowledgement of the WDA copyright

must be included on any reproductions. Learners may copy reasonable portions of the

curriculum for the purpose of study. Any other use of this curriculum must be referred to

theWDA. Ph: (+250) 255113365; fax: (+250) 255113365.

© Workforce Development Authority (WDA) 2014

Published by

Workforce Development Authority (WDA)

P. O. BOX 2707 Kigali

Tel: (+250) 255113365

Internet: http:// www.wda.gov.rw

http://www.wda.gov.rw/

iii | P a g e

Table of Contents

C o p y r i g h t i i

T a b l e o f C o n t e n t s i i i

L i s t o f a b b r e v i a t i o n s v i i

A c k n o w l e d g m e n t s i x

1 . G E N E R A L I N T R O D U C T I O N 1

2 . Q U A L I F I C A T I O N D E T A I L S 2

2.1 Description 2

2.2 Minimum entry requirements 2

2.3 Information about pathways 3

2.4 Job related information 3

2.5 Employability skills and life skills 4

2.6 Information about competencies 6

T R A I N I N G P A C K A G E 7

3.1 Course structure 7

3.2Competencies chart 7

3.4 Flowchart 9

A S S E S S M E N T G U I D E L I N E S 1 0

4.1 Assessment Methodology 10

4.2 Portfolio 10

C C M M S 5 0 1 - M O N I T O R I N G O F O C C U P A T I O N A L S H E A T W O R K P L A C E 1 3

Learning unit 15

LU 1: Conduct OSH (occupational safety and health) monitoring 15

Learning unit 19

LU 2:Collect and analyze Occupational health, safety incidents report 19

Learning unit 25

LU 3: Train all staff on occupational health and safety matters 25

C C M E N 5 0 1 - U P P E R I N T E R M E D I A T E W O R K P L A C E E N G L I S H 3 1

LU 1: Communicate orally in social and professional situations with ease 33

LU 2:Read correctly a range of materials 38

LU 3:Listen to audio messages with different English accents to get the intended message 42

iv | P a g e

LU 4:Produce a variety of medium texts on professional and general topics 47

C C M K N 5 0 1 - I K I N Y A R W A N D A K ’ I N T Y O Z A 5 4

Gukoresha ubuvanganzo nyandiko ashyikirana n’abandi 57

Gukoresha Ikinyarwanda k'intyoza agaragaza uburyo bunyuranye bwo gukemura amakimbirane no

gukoresha ibinyazina binyuranye. 64

LU 3: Gukangurira abandi akamaro k’isuku n’isukura no gukoresha ibinyazina binyuranye. 73

LU 4: Gukoresha Ikinyarwanda k'intyoza agaragaza uburyo bunyuranye bwo gutunganya ubutaka no

gukoresha ibinyazina binyuranye 83

LU 5: Gukoresha neza uburyo bunyuranye bw ’ ubwumvane no kwandika yubahiriza imyandikire

y’Ikinyarwanda. 93

C C M S E 5 0 1 - W O R K I N G I N A S O C I A L L Y D I V E R S E E N V I R O N M E N T 1 0 4

LU 1:Communicate with customers and colleagues from diverse backgrounds 106

LU 2: Address cross-cultural misunderstandings 110

C C M I W 5 0 1 - I C T A T W O R K P L A C E 1 1 5

LU 1: Prepare document Layout 117

LU 2: Apply basic computer operations 122

LU 3:Manage Data 128

C C M B O 5 0 1 - B U S I N E S S O R G A N I S A T I O N 1 3 4

LU 1: Identify Activities To Be Accomplished For Real Business 136

LU 2: Create a productive working environment 143

LU 3: Run real business operation 152

LU 4: Monitor and evaluate the business 158

C C M P E 5 0 1 - P R O F E S S I O N A L E T H I C S 1 6 3

LU 1 :Apply human values 165

LU 2:Respect engineering ethics 170

LU 3: Apply safety 174

W L D I A 3 0 1 - I N D U S T R I A L A T T A C H M E N T P R O G R A M ( I A P ) 1 7 9

LU 1: Apply for internship/employment 181

LU 2: Demonstrate appropriate workplace behavior and attitudes 185

LU 3: Respect worker’s and employer’s rights and responsibilities 190

LU 4: Organize and evaluate one’s internship 196

G E N A M 5 0 1 - A D V A N C E D A N A L Y S I S A N D S T A T I S T I C S 2 0 2

v | P a g e

LU 1: Apply fundamentals of integrals 204

LU 2: Identify measures of dispersion and interpret bivariate data 208

G E N G P 5 0 1 - G E N E R A L P H Y S I C S 2 1 3

LU 1:Sources of Energy in the world 216

LU 2:Motion in orbits 221

LU 3:Mobile phone and radio communication 226

LU 4:Climate change and Greenhouse effect 231

LU 5:Earthquakes, Tsunami, floods landslides and cyclone 236

LU 6:Application of optical fibre in telecommunication systems 241

G E N G C 5 0 1 - G E N E R A L C H E M I S T R Y 2 4 8

LU 1:Describe the transition metals 250

LU 2:Perform chemical titration 255

LU 3:Perform electrochemical cell reactions 261

LU 4: Describe polymerization 266

W L D P H 5 0 1 - B A S I C O F P N E U M A T I C A N D H Y D R A U L I C S Y S T E M S 2 7 2

LU 1:Apply the principles of generating hydraulic and pneumatic power 274

LU 2:Describe the operation of hydraulic system 279

LU 3:Describe the operation of pneumatic system 284

LU 4:Construct and apply pneumatic and hydraulic circuits 289

W L D D G 5 0 1 - D E S I G N A N D C O M M U N I C A T I O N G R A P H I C S 2 9 7

LU 1:Analyze the DCG work 299

LU 2:Perform Plane and Descriptive Geometry 303

LU 3:Perform Design Communication and Computer Graphics 311

W L D M M 5 0 1 - M I G / M A G 3 1 8

LU 1:Analyze the MIG/MAG work 320

LU 2: Prepare Materials, Workplace, Equipment And Tools 325

LU 3:Carryout MIG/MAG welds 333

LU 4:Cleanup work area and maintain tools and equipment 343

Summative Assessment 348

W L D F W 5 0 1 - F C A W W E L D I N G 3 5 4

LU 1: Analyze the FCAW work 356

LU 2: Analyze the FCAW work 361

vi | P a g e

LU 3: Carry out FCAW welds 370

LU 4: Finish the work 378

LU 5: Carry out workshop Housekeeping 383


W L D T W 5 0 1 - T I G W E L D I N G 3 9 3

LU 1:Analyze the TIG welding work 395

LU 2:Prepare Materials, Workplace, Equipment And Tools 400

LU 3: Perform joints by TIG 407

LU 4:Clean the work place and arrange tools and equipment 415


W L D P W 5 0 1 - P I P E W E L D I N G U S I N G S M A W W E L D I N G 4 2 7

LU 1: Analyze The Pipe Welding Work 429


LU 3: Carry out pipe welding using SMAW 440

LU 4: Carry out workshop Housekeeping 446


W L D M F 5 0 1 - M E T A L F O R M I N G 4 5 5

LU 1: Analyze The Metal Forming Work 457


LU 3Carry out metal work shaping 469

LU 4: Clean the work place and arrange tools and equipment 475


G L O S S A R Y a

vii | P a g e

List of abbreviations

2D CAD Two-Dimension CAD

3D CAD Three-Dimension CAD

CDU Curriculum Development Unit

CCM Complementary Modules

CSTWE Construction-Welding

CV Curriculum Vitae

ICT Information Communication Technology

IPRC Integrated Polytechnics Regional Centers

PPE Personal Protective Equipment

RTQF Rwanda Technical Qualification Framework

TVET Technical and Vocational Education and Training

VTC Vocational Training Center

WDA Workforce Development Authority

PC Performance criteria

LU Learning unit

TIG Tungsten Inert Gas Welding

MIG Metal Inert Gas Welding

MAG Metal Active Gas welding

FCAWFlux Cored Arc Welding

MMAWManual Metal Arc Welding

SMAW Shielded Metal Arc Welding

PPEPersonal Protective Equipment

CO2Carbon dioxide

1F Fillet weld in down hand position

viii | P a g e

2FFillet weld in horizontal position

2FRFillet welding rotation

3F Fillet weld in vertical position

4F Fillet weld in overhead position

5F horizontally fixed.

1GGroove weld in down hand position for plate and Groove weld for pipe welding in down hand

position

2G Groove weld in horizontal position for plate and Groove weld for pipe welding fixed vertically

3G Groove weld in vertical position

4G Groove weld in overhead position

5G Groove weld for pipe welding fixed horizontally

6GGroove weld for pipe welding fixed at 450

BOQBill of quantity

DCG Design communication graphics

WHSWork Health and Safety

DTP Desktop publishing

ix | P a g e

Acknowledgments

Workforce Development Authority wishes to thank the following persons who participated in

the development of this curriculum:

Coordination

HABIMANA Théodore, Director/TVET Training Department - WDA

MUHIRE Jean Marie Vianney, Head/CDU - WDA

Facilitators

NIKUZE Bernadette, Facilitator/CDU – WDA

HATEGEKIMANA Gratien, Facilitator/RP

Curriculum Development and Assesment Team

Names Occupation Company/Institution

IYAMUREMYE Ferdinand Welding Instructor IPRC East

KAYINAMURA Felix Welder ECBRH Ltd

KWIBUKA Victor Trainer VTC Mpanda

MAJYAMBERE Seleman Welding Instructor IPRC Kigali

MANIRAGUHA Noel Welding Instructor VTC Kavumu

MANIRAKIZA Jean De Dieu Welding Trainer IPRC Kigali

MUGABO Innocent IT trainer IPRC Kigali

NDIKURYAYO Fabien Assistant Lecturer IPRC Kigali

NGENDAHIMANA Jean Claude Welding Instructor IPRC South

NIYONZIMA Denis Welding Trainer IPRC WEST

NKERABAHIZI Jean Baptiste Trainer IPRC Kigali

NSABIMANA Jean Pierre Welding Instructor IPRC Kigali

SADIKI Pacifique Welder Pioneers CO.Ltd

TUYIZERE Felicien Welding Trainer ETAG Gisenyi

MUNYESHYAKA Claude Trainer St Emmanuel school complex

HARINDINTWARI Joseph Trainer Institut Baptiste de BUBERUKA

SEBAGABO Casimir Welder Straight Technical Services

MUJYEMUSENGA Venuste Welder 2JBenchmark

MUSONI Jean Claude Trainer Nyabihu TVET School

KAMBARI Vincent Teacher GS St Marcel/Kayonza

NIYIRERA Eugenie Trainer School of Arts, Multimedia, and Sports

NGEZAHAYO Emmanuel Teacher/Author Rusumo high school

NIYODUSENGA Patrick Physics teacher Ecole des sciences de Nyanza

UWINEZA Patrice Sciences trainer Nyamata TVET school

UMUGABEKAZI Yvette Chemist ADM-IBTC

MUSAFIRI Ernest Instructor IPRC NGOMA

x | P a g e

MUSONI Jean Claude Trainer Nyabihu TVET School

UWERA Marceline Socio-linguistics Officer RALC

MUTAGANZWA Gilbert Teacher Ecole Secondaire de Rukara

MATATA Jean Bosco Teacher College Ami des Enfants

GASIMBA François Xavier Lecturer UR/College of Education

KAMBARI Vincent Teacher GS St Marcel/Kayonza

MUREGO Yves Quality Assurance Officer WDA

BUCYENSENGE Vincent Instructor IPRC KARONGI

GASANA Vedaste Lecturer INES

FURAHA INEZA Jean Raymond Trainer Lycee de Gisenyi

NGEZAHAYO Emmanuel Maths teacher/author Rusumo High School

NIYODUSENGA Patrick Physics teacher Ecole des sciences de Nyanza

UWINEZA Patrice Sciences trainer Nyamata TVET School

UMUGABEKAZI Yvette Chemist ADM-IBTC

NIYOMUGABO Claude Data Manager/Format Editor Genial Contractors ltd

1 | P a g e

1. GENERAL INTRODUCTION

The curriculum presents a coherent and significant set of competencies to

acquire to perform the occupation ofSenior Welder. It is designed with an

approach that takes into account the training needs, the work situation, as well as the goals and

the means to implement training.

The modules of the curriculum include a description of the expected results at the end of

training. They have a direct influence on the choice of the theoretical and practical learning

activities. The competencies are the targets of training: the acquisition of each is required for

certification.

The curriculum is the reference to carry out the assessment of learning. Assessment tools of

learning are developed on the basis of this document.

The curriculum consists of three parts. The first part is of general interest and shows the nature

and goals of a program and the key concepts and definitions used in the document. The second

part presents the qualification, its level in the qualification framework, its purpose, its rationale

and the list of modules it comprises. The third part deals with the training package. It includes

the competencies chart, the sequencing of module learning, the description of each module

and the course structure.

The pages describing the modules are the heart of a curriculum. They present the title of the

module, the length of training, the amount of credits, the context in which the competency is

performed, the prerequisite competencies, the learning units and the performance criteria.

In each module, a course structure is provided. The course structure describes the learning

outcomes (knowledge, skills and attitude) and the learning contents related to each learning

unit. Also, the learning activities and resources for learning are suggested.

Finally, the assessment specifications and guidelines are included in each module.

Section

1

2 | P a g e

Section

2 2. QUALIFICATION DETAILS

2.1 Description

This qualification provides the skills,

knowledge and attitudes for a learner to be

competent in tasks and activities that

require the application of practical skills in a

defined context. Work would be

undertaken in various Construction

Sector/industries where Senior Welder

services are provided; Learners may work

with minimum supervision.

At the end of this qualification, qualified

learners will be able to: 1. Monitor occupational SHE at workplace

2. Maintain professional conversation in

upper-intermediate English

3. Gukoresha Kinyarwanda cy’intyoza

4. Work in a socially diverse environment

5. Use ICT at workplace

6. Organize a business

7. Apply professional ethics

8. Apply advanced analysis and statistics

9. Apply general chemistry

10. Apply general physics

11. Apply basic of pneumatic and hydraulic

systems

12. Perform design and communications

graphics

13. Perform MIG/MAG welding

14. Perform FCAW welding

15. Perform TIG welding

16. Perform pipe welding using SMAW

welding

17. Perform metal forming

18. Integrate workplace

2.2 Minimum entry requirements

TVET Certificate IV in Production Welding or other relevant qualifications or through Recognition of Prior Learning.

Title: TVET CertificateV inProduction Welding

Level: REQF Level 5

Credits: 124

Sector: Mining and Manufacturing

Sub-sector: Welding and fabrication

Issue date: November,2014

3 | P a g e

2.3 Information about pathways

2.4 Job related information

This qualification prepares individuals to integrate the Construction sector with the professionalization

of Senior Welder; this qualification is for a person engaged in the welding and metal work environment

who performs tasks involving a range of skilled applications in a wide variety of contexts.

Possible jobs related to this qualification

Mig/Mag And Fcaw Welder

Tig Welder

Pipe Smaw Welder

Metal Fabricator

Preferred pathways for candidates entering

this qualification include:

Candidates enter this qualification after

achieving TVET Certificate IV in

Production Welding or other relevant

qualifications or through Recognition

of Prior Learning

Progression route of candidates achieving

this qualification include:

Candidates exiting this qualification are able to enter TVET diploma in Production Welding.

Pathways into the qualification

Pathways from the qualification

4 | P a g e

2.5 Employability skills and life skills

Through the generic modules, individuals with this qualification have acquired the life and

employability skills to meet the following industry or enterprise requirements:

Communication

Documenting technical work in plain English

Writing and presenting reports

Safety and security precautions

Working collaboratively with project team members

Health and environment

Health reproduction

Rwanda environmental protection, practices rules and regulations

Business Plan

Producing a small IT business plan

Planning and organizing

Preparing feasibility reports that take into account project scope, time, cost, quality,

communications and risk management

Self-management

Taking responsibility for own outputs in relation to specified quality standards

working according to the Rwandan Computer Society Code of Ethics regarding security, legal,

moral and ethical issues

5 | P a g e

Technology

Manipulate computer

Using internet

Languages other than Kinyarwanda

Using English as the medium of communication in the working environment

6 | P a g e

Number of competencies: 18 Core competencies : 11 Complementary competencies : 7 The total number of Credits: 124

2.6 Information about competencies

No Code Complementary competencies Credit

1 CCMMS501 Monitor occupational SHE at workplace 3

2 CCMUE501 Maintain professional conversation in upper-intermediate English 3

3 CCMKN501 Gukoresha Kinyarwanda cy’intyoza 3

4 CCMSE501 Work in a socially diverse environment 3

5 CCMIW501 Use ICT at workplace 3

6 CCMBO501 Organize a business 3

7 CCMPE501 Apply professional ethics 3

Total 21

1.

2.

No Code Core competencies Credit

GEN

ERA

L

1 GENAM501 Apply advanced analysis and statistics 8

2 GENGC501 Apply general chemistry 5

3 GENGP501 Apply general physics 5

4 CSTPH501 Apply basic of pneumatic and hydraulic systems 5

5 CSTDG501 Perform design and communications graphics 9

SPEC

IFIC

6 CSTMM501

Perform MIG/MAG welding 6

7 CSTFW501

Perform FCAW welding 7

8 CSTTW501

Perform TIG welding 10

9 CSTPW501

Perform pipe welding using SMAW welding 9

10 CSTMF501

Perform metal forming 9

11 CCMIA501 Integrate workplace 30

Total 103

7 | P a g e

TRAINING PACKAGE

The training package includes the competencies chart, the flowchart, the

modules, the course structure, and the assessment guidelines.

3.1 Course structure

The course structure describes the learning outcomes for each learning unit. These learning

outcomes are the essential skills and knowledge to be acquired. The contents to be covered for

each learning outcome are prescriptive. The Learning Activities contain a series of suggestions,

usually with several options, that will guide the learner and the trainer.

3.2Competencies chart

The competencies chart is a table that presents an overview of the specific competencies, the

general competencies, the work process and the time allocated to each competency. This table

provides an overall view of the competencies of the training program and allows identification

of the logical sequence of the learning of these competencies.

The competencies chart shows the relationship between general competencies and specific

competencies that are particular to the occupation, as well as the key stages of the work

process. It shows the links between the elements in the horizontal axis and those in the vertical

axis. The symbol (ο) marks a relationship between a general competency and specific

competency. The symbol (∆) indicates a relationship between a specific competency and a step

in the process of work. When the symbols are darkened, it indicates that the link is taken into

account in the description of the specific competency.

The competencies chart allows the trainer to consider the complexity of the competencies in

the organization of the progress of learning. Therefore, the vertical axis shows the specific

competencies in the order they should be acquired.

This is the starting point of the presentation of the competencies in the flowchart presented in

the following pages.

Section

3

8 | P a g e

SENIOR WELDER PROCESS GENERAL AND COMPLEMENTARY COMPETENCIES

SPECIFIC COMPETENCIES

Du

rati

on

(7

10

Hrs

)

An

alyz

e th

e w

ork

Org

aniz

e th

e w

ork

pla

ce

Per

form

th

e w

ork

Fin

ish

th

e w

ork

Per

form

wo

rksh

op

ho

use

keep

ing

Mo

nit

or

Occ

up

atio

nal

SH

E b

est

pra

ctic

es

Mai

nta

in p

rofe

ssio

nal

co

nve

rsat

ion

in u

pp

er-

inte

rmed

iate

Engl

ish

Gu

kore

sha

ikin

yarw

and

a cy

’inty

oza

Wo

rk in

a s

oci

ally

div

erse

en

viro

nm

ent

Use

ICT

at w

ork

pla

ce

Org

aniz

e a

bu

sin

ess

Ap

ply

pro

fess

ion

al e

thic

s

Ap

ply

Ad

van

ced

an

alys

is a

nd

sta

tist

ics

Ap

ply

Gen

eral

ph

ysic

s

Ap

ply

Gen

eral

Ch

emis

try

Ap

ply

bas

ic o

f p

neu

mat

ic a

nd

hyd

rau

lic s

yste

ms

Per

form

des

ign

an

d c

om

mu

nic

atio

ns

grap

hic

s

# 2

3 4 5 6 7 8 1 9 11

12

13

Duration (530Hrs)

30

30

30

30

30

30

30

80

50

50

50

90

1 Perform MIG/MAG welding 60 ▲ ▲ ▲ ▲ ▲ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● ○ ●

2 Perform FCAW welding 70 ▲ ▲ ▲ ▲ ∆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● ○ ●

3 Perform TIG welding 100 ▲ ▲ ▲ ▲ ▲ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● ○ ●

4 Perform pipe welding using SMAW welding

90 ▲ ∆ ▲ ∆ ▲ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● ○ ●

5 Perform metal forming 90 ▲ ▲ ▲ ▲ ▲ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● ● ●

6 Integrate the workplace 300 ▲ ▲ ▲ ▲ ▲ ● ● ● ● ● ● ● ● ● ● ● ●

Figure 1: Competencies chart

Between the process and particular competencies|Between general and particular competencies

▲: Functional link application ●: Functional link application

∆: Functional link existence ο: Functional link existence

9 | P a g e

3.4 Flowchart

The flowchart of sequencing of learning is a schematic representation of the order of acquisition of the

competencies. It provides an overall planning of the entire training programme and shows the

relationship between the modules. This type of planning is to ensure consistency and progression of

learning. For each module, the flowchart shows the learning that is already in place, the learning that is

to take in parallel or later. The positions defined will have a decisive impact on all subsequent

pedagogical choices.

Figure 2: Flow chart

Monitoring of occupational SHE at workplace 3

Upper intermediate workplace english 3 Ikinyarwanda cy’intyoza 3

Working in a socially diverse environment 3 ICT at workplace 3

Professional ethics 3

Advanced analysis and statistics 8

Apply general chemistry 5 Apply general physics 5

Perform design and communications graphics 9

Apply basic of pneumatic and hydraulic systems 5

Perfom MIG/MAG welding 6 Perfom FCAW welding 7

Perfom TIG welding 10

Perfom pipe welding using SMAW welding 9

Perfom metal forming 9

Business organisation 3

Industrial attachment program (IAP) 30

10 | P a g e

ASSESSMENT GUIDELINES

4.1 Assessment Methodology

To assess knowledge, practical, and application skills through a jury system of continuous

evaluation that encourages learners to display understanding of the principles in application to

set practical tasks and their attendant theory to assess self-learning.

4.2 Portfolio

A portfolio is a collection of learner work representing learner performance. It is a folder (or

binder or even a digital collection) containing the learner’s work as well as the learner’s

evaluation of the strengths and weaknesses of the work. Portfolios reflect not only work

produced (such as papers and assignments, direct demonstration, indirect demonstration,

products, documents), but also it is a record of the activities undertaken over time as part of

learner learning. The portfolio is meant to show learner growth, development, and

achievements in the education system. It also shows that you have met specific learning goals

and requirements. A portfolio is not a project; it is an ongoing process for the formative

assessment. The portfolio output (formative assessment) will be considered only as enough for

complementary and general modules. Besides, it will serve as a verification tool for each

candidate that he/she attended the whole training before he/she undergoes the summative

assessment for specific modules.

There are two types of assessment (Formative Assessment and Summative/Integrated

Assessment). Each assessment has its own rule for passing to be declared competent.

Formative Assessment

1. This is applied on all types of modules (e.g. Complementary, General and Specific modules)

2. A trainee to be competent for a formative module must have at least 70% on checked

items or “yes” in indicators (e.g. questions, indicators in the checklist)

3. Each trainee should be competent on all formative assessments to be declared competent

on that module

4. All formative assessment should be declared competent before taking the

summative/integrated assessment

Section

4

11 | P a g e

Summative/Integrated Assessment

All Summative/Integrated assessment should match with the content of the module in the

curriculum.

Summative/Integrated Assessment is always in practical, giving it as a theoretical type of

assessment is not acceptable.

The integrated situation provided in the curriculum is a sample of the assessment to be

carried out, the Trainer/Teacher has the role of developing another one referring to the

task to be carried out in the integrated situation in accordance to the circumstances inside

school, but the integrated situation should stick on the components of a task.

During Summative/Integrated assessment, assessor panel members should be three (3).

This Summative/Integrated assessment can be seen in specific modules and the Trainee

can be declared competent by the following rules:

For YES or NO scoring of indicators in Summative/Integrated Checklist

The trainee can be declared competent based on the assessment CRITERIA and its respective

assessment indicators

Assessment Criteria Passing Line in the

assessment indicators

Quality of Process 90%

Quality of Product 100%

Relevance 90%

Rest of Criteria/ any other criteria

(example: Safety)

100%

12 | P a g e

Note: the Assessor should check if the 10% indicator (Quality of Process and Relevance) in

which the Trainee was not able to meet during Summative/Integrated Assessment should not

be among those indicators that can cause any hazard, or the one indicator that is performed

poorly where there is room for improvement.

1. During assessment, trainees with special needs (e.g. people with disability) should be

assisted accordingly.

2. Deputy School Manager in-charge of Studies, Class Teacher, and Trainer should consider

the status (competent/not yet competent) of trainees before delivering the next module

with pre-requisites.

3. Respect of flowchart particularly in considering the delivery of modules which has

prerequisite of a following/subsequent module is considered in issuing TVET certificate,

otherwise other modules can be given anytime.

4. All evidences during assessment (e.g. quiz, checklist, forms) should have a written form

that is compiled in the Trainer (source) and Trainee (result) portfolio. Portfolio is the

responsibility of School, Class Teacher, and Trainees. It should be given to trainees after

certification.

5. Industrial Attachment Program (IAP)

- All Trainees should finish and declared competent on all modules before taking IAP

module.

- Trainees should finish and declared competent on the 30 hours content of IAP

module written in the curriculum before they go to workplace or industry.

- The school should organize visit for all trainees in the workplace or industry to

confirm and assist IAP especially in filling up the logbook.

- An interview to the trainee should be conducted in the school after the IAP has

been completed and should be documented in the trainee portfolio.

- All completed logbooks should be part of the trainee portfolio.

13 | P a g e

Competence

C C M M S 5 0 1 - MONITORING OF OCCUPATIONAL SHE AT WORKPLACE

CCMMS501 Monitor Occupational SHE best practices

REQF Level: 5 Learning hours

Credits: 3 30

Sector: All

Sub-sector: All

Issue date: November, 2017

Purpose statement

This module describes the skills, knowledge and attitudes required to perform OSHE monitoring systems taken as

instruments used for measurement and analysis in the area of occupational safety and health. They are commonly

used to inform and guide government policy. Typically, these systems are used to give an indication of the number

of work accidents or occupational diseases, or they might record information about places of work, or about the

activities of the organizations involved in ensuring good working conditions. Moreover, the module describes the

skills, knowledge and attitudes required to monitor occupational safety, health and security policies and

procedures. Finally, the learner learns how to advice and train all employees on health and safety matters.

14 | P a g e

Learning assumed to be in place

Not applicable

Elements of competence and performance criteria

Learning units describe the essential outcomes of a competence.

Performance criteria describe the required performance needed to demonstrate achievement

of the learning unit.

By the end of the module, the trainee will be able to:

Elements of competence Performance criteria

1. Conduct OSHE ( occupational safety

and health) monitoring

1.1 Proper checking of application of OSHE policies,

procedures and regulations

1.2 Proper monitoring of the use of PPEs

1.3 Proper monitoring the compliance of OSHE best

practice

2. Collect and analyze occupational

health, safety incidents report

2.1 Proper collection of data regarding OSHE incidents

2.2 proper analysis of OSHE data collected

2.3 Adequate elaboration of a compiled incident reports

2.4 Proper recommendation of safest way to do the job

3. Train all staff on occupational

health and safety matters

3.1 Appropriate provision of information and instructions

3.2 Appropriate training to all employees and supervisors

on OSHE standards/regulations

3.3 Proper evaluation of trained OSHE programs

15 | P a g e

Learning unit

LU 1: Conduct OSH (occupational safety and health) monitoring

1 Learning Outcomes:

1. Check if SHE policies, procedures and regulations are applied 2. Monitor use of PPEs 3. Monitor compliance of OSHE best practice

10 Hours

Learning Outcome1.1: Check if SHE policies, procedures and regulations are applied

SHE policies in accordance with the discipline

SHE regulations; Safety roles of employees

Responsibility of

administration

Incident reporting

Ventilation and air quality

First aid facilities

Hazard control in

workplace

Equipment and machinery

Emergency response plans

SHE standards;

Responsibility in working

place

Hazard identification and

risk Control

Making the working area

safe

Personnel protective

o Brainstorming

o Documentary research

o Group discussion

Flipcharts

Markers

Flipcharts stand

Internet

Resources Learning activities Content

16 | P a g e

Formative Assessment 1.1

The assessor may collect any of the following evidences and make judgements if the performance

criterion has been achieved.

Types of evidence Portfolio assessment tools

Written

Oral

Performance

Multiple choice True or false question Matching Sentence completion Ticking Expose (presentation) Task: Checking if OSHE policies, procedures and regulations are

applied

Checklist Score

Yes No

OSHE policies are checked

OSHE regulations are checked

OSHE standards are checked

Observation

equipment

Health of employees

Facilities

Reporting of incidents and

accidents

Emergency preparedness

procedures

Performance criterion

Proper checking of application of OSHE policies, procedures and regulations

17 | P a g e

Learning Outcome 1.2: Monitor use of PPEs

Types of PPEs to be used

according to the trade

Physical verification of PPEs

Cleaning and storage of

materials, tools and

equipment

o Group discussion

o Practical exercise

Checklist

PPEs

Brushes

Store

Shelter

Shelves

Pen





Written

Oral

Performance

Multiple choice True or false question Matching Sentence completion Ticking Expose (presentation) Task: Monitoring the use of PPEs

Checklist Score

Yes No

List of PPEs to be used according to the trade is checked

Physical verification of PPEs is done

Cleaning and storage of materials, tools and equipments are checked

Observation

Learning Outcome 1.3: Monitor compliance of OSHE best practice


Proper monitoring of the use of PPEs


18 | P a g e

OSHE best practice

regulations

standards

Standards checklist to be

evaluated according to the

specific trade

o Brainstorming o Group discussion o Group work





Written

Oral

Performance

Multiple choice True or false question Matching Sentence completion Ticking Expose (presentation) Task: Monitoring the compliance of OSHE best practice

Checklist Score

Yes No

OSHE best practices are checked

List of standards to be evaluated according to the specific trade is checked

Observation


Proper monitoring the compliance of OSHE best practice


19 | P a g e

Learning unit

LU 2:Collect and analyze Occupational health, safety incidents report


1. Collect data regarding OSHE incidents 2. Analyze OSHE data collected 3. Elaborate compiled incident reports 4. Recommend safest way to do the job

10 Hours

Learning Outcome 2.1: Collect data regarding OSHE incidents

Steps of data collection; o Consulting of incident

report documents o Talk to people involved or

witnesses to the event o Site visit

Categories of incidents; Major accident

fatal permanent injury

Minor accident (injuries) Near miss

o Small group discussions o Pair discussion o Brainstorming

- Reference books - Internet - Hand-outs - Didactic materials





Proper collection of data regarding OSHE incidents


20 | P a g e


Written

Oral

Performance

Multiple choice True or false question Matching Sentence completion Ticking Expose (presentation) Task: Collecting data regarding OSHE incidents in working area

Checklist Score

Yes No

Steps of data collection are followed

Categories of incidents are identified

Observation

Learning Outcome 2.2: Analyze OSHE data collected

Root and causes of incident; Poor management

laziness stupidity forgetfulness negligence ignorance

Influencing factors associated with the work

environment individual physical abilities,

organization and its management

system Overload Poor procedures Inadequate training Low motivation

Impact of incidents Social impact

loss of manpower medical expenses




21 | P a g e

Economic impact poor production, closer of the company compensation repairs

Physical effects permanent injuries, loss of ability to handle

materials, persistent pain headaches

Psychological effects anxiety, depression





Written

Oral

Performance

Multiple choice True or false question Matching Sentence completion Ticking Expose (presentation) Task: Analyzing the OSHE data collected

Checklist Score

Yes No

Identification of root and causes of incident

Identification of impact of incidents

Observation


Proper analysis of OSHE data collected

22 | P a g e

Learning Outcome 2.3: Elaborate compiled incident reports

Type of incident reports; Monthly report Quarterly report Annual report

Categories of incidents; Major accident

fatal permanent injury

Minor accident (injuries) Near miss

Template of incidents







Written

Oral

Performance

Multiple choice True or false question Matching Sentence completion Ticking Expose (presentation) Task: Elaborating a compiled incident reports


Adequate elaboration of a compiled incident reports


23 | P a g e

Checklist Score

Yes No

Types of incident reports are identified

Categories of incidents are identified

Template of incidents is well filled

Observation

Learning Outcome 2. 4: Recommend safest way to do the job

Use of PPEs

Emergency preparedness procedures

hazard identification and risk control

making the working area safe

reporting of incidents and accidents

Training of employees







Written

Oral

Performance

Multiple choice True or false question Matching Sentence completion Ticking Expose (presentation) Task: Recommending the safest way to do the job


Proper recommendation of safest way to do the job


24 | P a g e

Checklist Score

Yes No

Use of adequate PPEs is recommended

Emergency Preparedness Procedures is recommended

Hazard Identification And Risk Control is recommended

Making The Working Area Safe is recommended

Reporting Of Incidents And Accidents is recommended

Training of employees is recommended

Observation

25 | P a g e

Learning unit

LU 3: Train all staff on occupational health and safety matters


1. Provide information and instructions 2. Train all employees and supervisors on OSHE

standards/regulations 3. Evaluate trained OSHE programs

10 Hours

Learning Outcome 3.1: Provide information and instructions

Brief description of:

An occupational health and safety

(OH&S) program

A policy statement

The program elements

Individual responsibility

Joint occupational health and

safety committee

Health and safety rules

Correct work procedures

Employee orientation

Training

Workplace inspections

Reporting and investigating

accidents/incidents

Emergency procedures

Medical and first aid

Health and safety promotion

Workplace specific items

Responsibilities of the staff:

Responsibilities of workers

o Brainstorming

o Group work

o Discussion

- Reference books

- Internet

- Hand-outs

- Stories and

pictures


26 | P a g e

Using personal protection

and safety equipment as

required by the employer.

Following safe work

procedures

Knowing and complying with

all regulations.

Reporting any injury or

illness immediately

Reporting unsafe acts and

unsafe conditions

Participating in joint health

and safety committees or as

the representative

Responsibilities of supervisor

Instructing workers to

follow safe work practices.

Enforcing health and safety

regulations.

Correcting unsafe acts and

unsafe conditions.

Ensuring that only

authorized, adequately

trained workers operate

equipment.

Reporting and investigating

all accidents/incidents.

Inspecting own area and

taking remedial action to

minimize or eliminate

hazards.

Ensuring equipment is

properly maintained

Promoting safety

awareness in workers

Responsibilities of management

Providing a safe and healthful

workplace.

Establishing and maintaining a

health and safety program.

Ensuring workers are trained

or certified as required.

27 | P a g e

Reporting accidents/incidents

and cases of occupational

disease to the appropriate

authority

Providing medical and first aid

facilities

Ensuring personal protective

equipment is available

Providing workers with health

and safety information

Supporting supervisors in their

health and safety activities

Evaluating health and safety

performance of supervisors





Written

Oral

Performance

Multiple choice True or false question Matching Sentence completion Ticking Expose (presentation) Task: Providing information and instructions on occupational health

and safety matters


Appropriate provision of information and instructions

28 | P a g e

Checklist Score

Yes No

A brief description of an occupational health and safety (OH&S) program is provided

A brief description of A policy statement is provided

A brief description of the program elements is provided

Responsibilities of the staff are described (workers, supervisor, Management staff)

Observation

Learning Outcome 3.2: Train all employees and supervisors on OSHE standards/regulations

Training on SHE regulations

Safety roles of employees

Responsibility of administration

Incident reporting

Ventilation and air quality

First aid facilities

Hazard control in workplace

Equipment and machinery

Emergency response plans

Training on SHE standards

Responsibility in working place

Hazard identification and risk

control

Making the working area safe

Personnel protective

equipment

Health of employees

Facilities

Reporting of incidents and

accidents

Emergency preparedness

Procedures

o Brainstorming

o Group work

o Discussion

- Reference

books

- Internet

- Hand-outs

- Stories and

pictures


29 | P a g e





Written

Oral

Performance

Multiple choice True or false question Matching Sentence completion Ticking Expose (presentation) Task: Providing information on OSHE standards/regulations

Checklist Score

Yes No

A brief description of SHE regulations is provided

A brief description of SHE standards is provided

Observation

Learning Outcome 3.3: Evaluate trained OSHE programs

Evaluation forms

Learning assessment Questions and responses, topic of discussion

Training impact assessment

o Brainstorming o Group work o Discussion

- Reference books - Internet - Hand-outs - Stories and

pictures




Appropriate training to all employees and supervisors on OSHE

standards/regulations

30 | P a g e


Written

Oral

Performance

Multiple choice True or false question Matching Sentence completion Ticking Expose (presentation) Task: Evaluating trained OSHE program

Checklist Score

Yes No

Evaluation forms are well developed

Learning assessment (Questions and responses, topic of discussion…) is well developed

Training impact assessment is well developed

Observation

Reference: 1. Occupational Risk Control : Predicting and Preventing the Unwanted by Viner,Derek , ISBN:

9781472419712, Publication Date: 2015

2. OSHA General Industry regulations Book, 29 CFR 1910 Paperback- July1,2014 y MANCOMM Inc.

(Author, Editor)

3. OH&S : a management guide by Richard Archer, Kerry Borthwick, Susanne Tepe. Publication

Date: 2009

4. G:\\Basic OH&S Program Elements OSH Answers.htm

5. https://www.rospa.com/occupational-safety/advice/training-matters/

6. https://www.3tonline.fi/incident-reporting

7. http://www.safety.uwa.edu.au/topics/plant/inspection

8. http://www.hse.gov.uk/statistics/causdis/index.htm

9. https://www.ccohs.ca/oshanswers/hsprograms/job-haz.html


Proper evaluation of trained OSHE programs

http://www.ecu.eblib.com/patron/FullRecord.aspx?p=2004776https://ecu.on.worldcat.org/oclc/271786642?databaseList=638https://www.rospa.com/occupational-safety/advice/training-matters/https://www.3tonline.fi/incident-reportinghttp://www.safety.uwa.edu.au/topics/plant/inspectionhttp://www.hse.gov.uk/statistics/causdis/index.htmhttps://www.ccohs.ca/oshanswers/hsprograms/job-haz.html

Competence

C C M E N 5 0 1 - UPPER INTERMEDIATE WORKPLACE ENGLISH

CCMEN501 Maintain professional conversation in upper-intermediate English

REQF Level: 5 Learning hours

Credits: 3 30

Sector: All

Sub-sector: All

Issue date: January, 2017

Purpose statement

This core module describes the skills, knowledge and attitudes to be acquired for the trainee’s. The

trainee will be able to Prepare and deliver speeches at different social and professional occasions, adapt

speech messages to a particular audience, Ask questions to clarify, extend and follow up ideas, Produce

medium compositions on different trade-related subjects, Identify and differentiate different business

documents, Effective writing of different business documents, Identify and use of writing styles, read

different trade-related texts, Apply reading techniques to selected trade-related texts, Explain key

terms/words in their context, Answer reading comprehension questions precisely, Analyze different

trade-related texts,Summarize trade-related texts (in own words), identify differences between

common English accents, Listen and respond to users of common English their accents, Reporting

information listened to from different common accents, Steps of speech preparation and delivery,

Important tips on speech delivery, Requirements to properly articulate information, Analyse trade-

related texts and Summarise texts.

Learning assumed to be in place

Oral Basic English Communication Intermediate Workplace English

Elements of competence and performance criteria

Learning units describe the essential outcomes of a competence.

Performance criteria describe the required performance needed to demonstrate achievement

of the learning unit.

By the end of the module, the trainee will be able to:

Elements of competence Performance criteria

1. Communicate orally in social and

professional situations with ease

1.1 Acceptable preparation of speeches on different social and professional occasions

1.2 Effective delivery of speeches by audible and clear articulation of messages addressed to an audience using pronunciation, segmental and Suprasegmental phonology

1.3 Asking relevant questions to clarify, extend and follow up ideas according to question forms

2. Read correctly a range of

materials

2.1 Adequate reading of different trade-related texts 2.2 Clear analysis of trade-related texts (identification

and description of characters, events and settings, as well as to express preferences by giving reasons)

2.3 Effective summary of key ideas in trade-related texts

3. Listen to audio messages with

different English accents to get

the intended message

3.1 Appropriate listening and responding to others 3.2 Clear identification of differences between

common English accents 3.3 Accurate reporting of information listened to in

different accents

4. Produce a variety of medium

texts on professional and

general topics

4.1 Clear and detailed writing about a wide range of trade-related subjects.

4.2 Effective differentiation of business documents (inventory, memos, letters, handovers, receipts, minutes)

4.3 Appropriate writing of business documents 4.4 Appropriate use of writing style applicable to each

type of business document

Learning unit

LU 1: Communicate orally in social and professional situations with ease


1. Prepare speeches for different social and professional occasions

2. Deliver speeches to an audience 3. Ask questions to clarify, extend and follow up ideas according

to question forms 10 Hours

Learning Outcome1.1:Prepare speeches for different social and professional occasions

Steps for speech preparation Step 1: Research and

Preparation Step 2: Writing Your

Speech Step 3: Practicing Step 4: Putting

Together Visual Aids Step 5: Predicting

the Q&A

Identification of categories of audience Familiar audience Non-familiar

audience Adaptation of the

message to the audience

o Brainstorming o Documentary research o Practical exercise o Presentation o Role plays

Flip charts

White/chalk Board

Markers

Microphones

Reference books

Scenarios

Stationeries

Scenarios

Projector

Lesson plan

Trainee manual

Reference books



Assessor may collect among the following evidences and make judgements on whether the

performance criterion has been achieved.


Written evidence

Performance evidence

Writing practice

Task: Write a 5 minutes’ speech on a topic of choice to be presented to

the class.

Checklist Score

Yes No

Indicator: Steps for speech preparation are well applied

Background of the topic is given

Speech script is prepared

Visual Aids are prearranged

Prospective Q&A are hypothesized

Indicator: Categories of audience are well identified

Familiar audienceis identified

Non-familiar audience is identified

Message is adapted to the audience

Observation


Acceptable preparation of speeches on different social and professional occasions

Learning Outcome 1.2:Deliver speeches to an audience

Important tips for speech delivery

Dos and Don’ts on speech delivery

Requirements to articulate message Pronunciation Speed Tone

o Brainstorming o Documentary research o Practical exercise o Presentation o Role plays

Flip charts

White/chalk Board

Markers

Microphones

Reference books

Scenarios

Stationeries

Scenarios

Projector

Lesson plan

Trainee manual

Reference books





Oral evidence


Presentation

Task

Deliver a 5 minutes’ speech on a topic of choice to the class.


Effective delivery of speeches by audible and clear articulation of messages

addressed to an audience using pronunciation, segmental and Suprasegmental

phonology


Checklist Score

Yes No

Indicator 1:EffectiveSpeech delivery to an audience

Tips for speech delivery are applicable

Dos and Don’ts on speech delivery are applicable

Indicator 2:Message articulation is effective

Pronunciation is accurate

Speed is considerable

Tone is formal

Observation

Learning Outcome 1.3: Ask questions to clarify, extend and follow up ideas according to question

forms

Question forms Yes/No questions Wh-questions Choice questions Hypothetical questions Embedded questions Leading questions

o Practical exercise o Presentation o Role plays o Group work

Scenarios

White/blackboard

Reference books

Markers

Flip charts

Paper

Stationeries





Asking relevant questions to clarify extend and follow up ideas according to

question forms



Oral evidence


Discussions

Presentations

Task: Answer at least 3 questions from the audience on your 5-minute speech.

Checklist Score

Yes No

Indicator: Questions are well formulated

Yes/No questionswell formulated

Wh-questionswell formulated

Choice questions are well stated

Hypothetical questionswell formulated

Embedded questionswell formulated

Leading questionswell formulated

Observation

Learning unit

LU 2:Read correctly a range of materials


1. Read different trade-related texts adequately 2. Analyse trade-related texts 3. Summarize key ideas in trade-related texts

5 Hours

Learning Outcome 2.1: Read different trade-related texts adequately

Types of texts Expository Narrative Descriptive Directive Argumentative

Application of reading techniques on selected texts Reading for details Reading for specific

information Explanation of key

terms/words in the text Provision of answers to

reading comprehension questions

o Brainstorming o Documentary research o Practical exercise o Group work o Presentation

- Flip charts - White/chalk Board - Markers - Reference books - Stationeries - Projector - Lesson plan - Trainee manual






Written evidence

Oral evidence


Reading practice Presentations Matching Multiple choice

Task: Using an appropriate reading strategy, read the text provided to you

and answer its comprehension questions

Checklist Score

Yes No

Indicator 1: The type of texts is understood

Expository text is understood

Narrative text is understood

Descriptive text is understood

Directive text is understood

Argumentative text is understood

Indicator 2: Reading techniques are applied

Reading for details is applied

Reading for specific information is applied

Indicator 3: Vocabulary and comprehension

Key terms/words are explained

Comprehension questions are answered

Observation


Adequate reading of different trade-related texts

Learning Outcome 2.2:Analyse trade-related texts

Identification and description Text Structure Purpose of the text Style

Technicality Illustration Prose or verse

Writer’s stance

o Practical exercise o Presentation o Role play o Group discussion

Scenarios

White/blackboard

Reference books

Markers

Flip charts

Paper

Stationeries

Lesson plan

Trainee manual





Written evidence


Reading practice Presentations Multiple choice

Task: Read the text provided by the trainer and explain its purpose

Checklist Score

Yes No

Indicator: The trade related text is accurately analyzed

Text Structure: characters, events and settings are analyzed

Purpose of the text is understood

Style is identified

Writer’s stance is recognized

Observation


Clear analysis of trade-related texts (identification and description of characters, events and settings, as well as to express preferences by giving reasons)


Learning Outcome 2.3:Summarize key ideas in trade-related texts

Steps to summarize: Maintenance of the

most important ideas Elimination of the less

important details Paraphrasing in own

words

o Practical exercise o Presentation o Group work

- White/blackboard - Reference books - Markers - Flip charts - Paper - Stationeries - Trainee manual - Lesson plan





Written evidence

Oral evidence


Reading practice Writing practice Presentations

Task: Summarize the text given by the trainer

Checklist Score

Yes No

Indicator: Steps to summarize are followed

The most important ideas are maintained

Less important details are eliminated

The content is paraphrased in own words

Observation


Effective summary of key ideas in trade-related texts


Learning unit

LU 3:Listen to audio messages with different English accents to get the intended message


1. Listen and respond to others correctly 2. Identify differences between common English accents clearly 1. Report information listened to in different accents accurately

4 10 Hours

Learning Outcome 3.1: Listen and respond to others correctly

Application of active listening strategies to different accents Listening forGeneral

information Listening for Specific

information

Types of listening Informative listening Discriminative listening Relationship listening Appreciative listening

Responding to different accents Responding through

Interactions Asking for clarification Expressing satisfaction

o Modelling o Practical exercise o Presentation o Role plays

Flip charts

White/chalk Board

Audiovisual materials

Scenarios

Stationeries

Projector

Computer

Lesson plan

Trainee manual

Recordings






Oral evidence


Listening practice Discussions True or false questions

Task: Following your trainer’s instructions, listen and respond to what you hear.

Checklist Score

Yes No

Indicator 1: Active listening strategies are applied

Active listening is applied for general information

Active listening is applied for specific information

Indicator 2: Types of listening are correctly applied

Informative listening is applied

Discriminative listening is applied

Relationship listening is applied

Appreciative listening is applied

Indicator 3: Exact reactions to different accents are processed

Questions are asked for clarification

Satisfaction testimonial is expressed

Observation


Appropriate listening and responding to others

Learning Outcome 3.2: Identify differences between common English accents clearly

Introduction to English accents Defining an English accent Common English accents

Differences between American and British English Vowel Pronunciation Consonant pronunciation Rhotic accent Change of stress Changes in articulation

o Practical exercise o Drilling/ o Modeling o Presentation o Roleplay

- Scenarios - White/blackboard - Reference books - Markers - Flip charts - Stationeries - Audiovisual material - Recordings - Trainee manual - Lesson plan





Oral evidence


Listening practice Discussions True or false questions Note taking

Task: Listen to two different recordings played by the trainer and identify

the differences between the accents of both speakers


Clear identification of differences between common English accents


Checklist Score

Yes No

Indicator 1: Introduction to English accents is understood

English accent is defined

Common English accents are mastered

Indicator 2: American and British English accents are differentiated

Vowel Pronunciation is considered

Consonant pronunciation is considered

Rhotic accent is considered

Change of stress is considered

Changes in articulation are considered

Observation

Learning Outcome 3.3:Report information listened to in different accents accurately

Reporting information General information Specific information

o Practical exercise o Presentation o Drilling/ o Modelling

- Scenarios - White/blackboard - Reference books - Markers - Flip charts - Audiovisual materials - Recordings - Stationeries





Accurate reporting of information listened to in different accents



Written evidence

Oral evidence


Listening practice

Discussions

Presentations

Task:

Listen and report to the information you hear from each recording

played to you by the trainer

Checklist Score

Yes No

Indicator: Reporting is done according to types of information

Reported considering general information

Reported considering specific information

Observation

Learning unit

LU 4:Produce a variety of medium texts on professional and general topics


1. Write about a wide range of trade-related subjects clearly 2. Differentiate business documents effectively 3. Write business documents perfectly 4. Use writing style applicable to each type of business document

5 Hours

Learning Outcome 4.1: Write about a wide range of trade-related subjects clearly

Varieties of writing Chronological writing Analytical writing Descriptive writing Compare and

contrast writing Evaluative writing Summary writing

The Writing processes Exploring and

planning Drafting Building effective

paragraphs Editing

o Brainstorming o Documentary research o Practical exercise o Group work

- Flip charts - White/chalk Board - Markers - Reference books - Stationeries - Projector - Lesson plan - Trainee manual






Written evidence

Performance

Writing practice Presentations

Task: Write a short text analysing an important issue affecting your career

Checklist Score

Yes No

Indicator 1: Varieties of writing are understood

Chronological writing is understood

Analytical writing is understood

Descriptive writing is understood

Compare and contrast writing

Evaluative writing is understood

Summary writing is understood

Indicator 2: The Writing processes is followed

Exploring and planning is considered

Drafting is done

Effective paragraphs are built

Editing is done

Observation


Clear and detailed writing about a wide range of trade-related subjects

Learning Outcome 4.2: Differentiate business documents effectively

Identification and differentiation of business documents Business plans and Goals

Business proposals Concept notes

Accounting Documents Financial reports Financial statements Goods received note Purchase order Goods delivery note Requisition

Customer service documents

Business reports Annual reports Term reports Quarterly report Activity/Operation

reports Operational documents

Contracts Business letters Memorandum of

Understanding

o Practical exercise o Brainstorming o Presentation o Documentary research o Group work o Roleplay

- Scenarios - White/blackboard - Reference books - Markers - Flip charts - Stationeries - Lesson plan - Trainee manual





Effective differentiation of business documents (inventory, memos,letters, handovers, receipts, minutes)



Written evidence

Oral

Performance

Writing practice Discussions Presentations Multiple choice Matching

Task: Name at least 4 different types of business documents and specify their differences

Checklist Score

Yes No

Indicator: Business documents are explored

Business plan is explored (characteristics, structure, elements, importance,..)

Accounting documents are explored (characteristics, structure, elements, importance,..)

Customer service documents are explored (types, characteristics, structure, elements, importance,..)

Business reports are explored (characteristics, structure, elements, importance,..)

Operational documents are explored (types, characteristics, structure, elements, importance,..)

Observation

Learning Outcome 4.3: Write business documents perfectly

Steps to write business documents Identifying the

audience Identifying the

document’s purpose Organizing the

writing Proofreading the

business document Editing the business

o Practical exercise o Documentary research o Presentation o Group work

- White/blackboard - Reference books - Markers - Flip charts - Paper - Stationeries - Trainee manual - Lesson plan


document

Writing commonly used business documents





Written evidence


Writing practice Presentation

Task:

Write a business of a project you would implements upon graduation

Checklist Score

Yes No

Indicator 1: Steps to write business documents are followed accurately

The audience is identified

The document’s purpose is identified

The writing is organized

The business document is proofread

The business document is edited

Indicator 2: Commonly used business documents are correctly written

Business plans are elaborated

Accounting documents are prepared

Customer service documents are written

Business reports are drafted

Operational documents are prepared

Etc

Observation


Appropriate writing of business documents

Learning Outcome 4.4: Use writing style applicable to each type of business document

Application of principles and techniques of business writing

Formatting a business document

o Practical writing exercises o Group work o Documentary research o Presentation

- White/blackboard - Reference books - Markers - Flip charts - Stationeries - Trainee manual - Lesson plan





Written evidence


Writing practice Presentation Matching

Task:

Using the appropriate writing style for each business document, write a memo and business letter on a topic of your choice.

Checklist Score

Yes No

Indicator: Content and format are respected

Different principles and techniques of business writing are applied

Accurate business document format is used

Observation


Appropriate use of writing style applicable to each type of business document


Reference books:

1. Jacques Barzun, On Writing, Editing, and Publishing (Chicago: U. of Chicago Press,1972), pp. 57, 7

2. Jefferson Bates, Writing with Precision (Washington: Acropolis Books, 1985), pp. 82-85 3. George W. Fluharty and Harold R. Ross, Public Speaking (New York: Barnes and Noble,

1981), p. 276 4. William E. Wiethoff, Writing the Speech (Greenwood, IN: Alistair Press, 1994), p. 15 5. Judith Humphrey, “Writing Professional Speeches,” Vital Speeches of the Day, vol. 54,

Mar. 15, 1988, p. 343 6. Robert A. Rackleff, “The Art of Speechwriting,” Vital Speeches of the Day, vol. 54, Mar.

1, 1988, p. 311 7. Kenneth Roman and Joel Raphaelson, Writing That Works (New York: Harper and

Row,1981), p. 73 8. Dwyer, Karan Kangas&Marlina M. Davidson. “Is Public Speaking Really More Feared than

Death?” Communications Research Reports, Vol. 29, Issue 2, 2012. Pages 99 – 107. 9. Beebe, S. A., & Beebe, S. J. Public speaking: An audience-centered approach (6th ed.). (

New York: Pearson, 2006). 10. Fraleigh, D. M., &Tuman, J. S. Speak up! An illustrated guide to public speaking. (New

York: Bedford/St. Martins, 2009). 11. Paul Taylor, "Analysis and Synthesis of Intonation using Tilt Model", Journal of the

Acoustical Society of America. Vol 107 3, pp. 1697-1714. 12. Gimson, A. C.. "An introduction to the pronunciation of English". London: Arnold, 1989. 13. Trudgill, P. and J. Hanna. "International English: a guide to the varieties of

StandardEnglish". London: Hodder Education, 2008. 14. S. H. Weinberger and S. A. Kunath, “The Speech Accent Archive: towards a typology

of English accents,” Language and Computers,vol. 73, no. 1, pp. 265–281, 2011 15. Desmond A. Gilling "The Essential Handbook for Business Writing :communication

excellence in English, the language of business worldwide", First Edition. Canada, 2013 16. Green, G. M., Kantor, R. N., Morgan, J. L., Stein, N. L., Hermon, G., Salzillo, R., Sellner, M.

B., Bruce, B. C., Gentner, D., & Webber, B. L. Problems and Techniques of Text Analysis, April 1980.

17. Billmeyer, Rachel and Mary Lee Barton. Teaching Reading in the Content Areas: If Not Me, Then Who? Aurora, CO: McREL, 1998

18. Buckley, J. The Canadian Student’s Guide to Essay Writing. (6th ed.) Toronto, 2004

Competence

C C M K N 5 0 1 - IKINYARWANDA K’INTYOZA

CCMKN501 IKINYARWANDA K’INTYOZA

Ikiciro: 3 Amasaha ateganijwe

Indengo y'amasaha: 3 30

Ishami: Yose

Agashami: Twose

Igihe yateguriwe: Ukuboza, 2016

Intego nyamukuru

Iyi mbumbanyigisho irasobanura ubumenyi n’ubushobozi bukenewe kugira ngo uwiga ashobore :

Kumva, kuvuga, gusoma no kwandika Ikinyarwanda k’intyoza mu bikorwa bijyanye n’umwuga we.

Gukoresha ubuvanganzo nyandiko mu gushyikirana n’abandi abagezaho ibitekerezo bye kandi agaragaza uko yakira ibyabo.

Kugaragaza imyumvire n’imyifatire ikwiye agenda avoma mu myandiko, inkurushusho n’ikinamico binyuranye.

Kugereranya ingeri zinyuranye z’ubuvanganzo nyarwanda.

Guhanga no kumurika mu rurimi rw'Ikinyarwanda afatiye ku ngeri zinyuranye z’imyandiko.

Gukoresha neza ibinyazina bitandukanye.

Kwandika neza amazina bwite anyuranye.

Ubushobozi fatizo

Ubushobozi mu Kinyarwanda cy'umunyamwuga

Ingingo n’ibipimo by’ubushobozi

Ingingo z’ubushobozi zisobanura umusaruro w’ibanze ugomba kugerwaho.

Ibipimo by’ubushobozi bisobanura ubushobozi busabwa mu kugaragaza ko intego zikubiye mu mbumbe

zagezweho.

Ingingo z’Ubushobozi Ibipimo by’Ubushobozi

1. Gukoresha ubuvanganzo nyandiko ashyikirana n’abandi.

1.1 Gukoresha Ikinyarwanda k'intyoza, uwiga agaragaza ko yumva inkurushusho abinyujije mu ngiro zitandukanye.

1.2 Gusoma neza inkurushusho yubahiriza uturango n’isesekaza.

1.3 Gusubiza ibibazo ku nkurushusho mu nyandiko ikwiye. 1.4 Guhindura inkurushusho mo agakino akurikiranya neza

ingingo. 1.5 Guhimba no kwandika inkurushusho akurikiranya neza

ingingo.

2. Gukoresha Ikinyarwanda k'intyoza uwiga agaragaza uburyo bunyuranye bwo gukemura amakimbirane no gukoresha ibinyazina binyuranye.

2.1. Gukoresha Ikinyarwanda k'intyoza, uwiga agaragaza ko yumva umwandiko ku nsanganyamatsiko yo gukemura amakimbirane abinyujije mu ngiro zitandukanye.

2.2. Gusoma neza umwandiko yubahiriza utwatuzo n’isesekaza. 2.3. Gusubiza ibibazo ku mwandiko mu mvugo ikwiye. 2.4. Guhina no guhimba umwandiko akurikiranya neza ingingo. 2.5. Kumurika ingero zifatika zigaragaza uburyo bwo gukemura

amakimbirane. 2.6. Gukoresha ibinyazina binyuranye ku buryo bukwiye.

3. Gukangurira abandi akamaro k’isuku n’isukura no gukoresha ibinyazina binyuranye.

3.1. Gukoresha Ikinyarwanda k'intyoza, uwiga agaragaza ko yumva umwandiko ku kamaro k’isuku n’isukura abinyujije mu ngiro zitandukanye.

3.2. Gusoma neza umwandiko yubahiriza utwatuzo n’isesekaza. 3.3. Gusubiza ibibazo ku mwandiko mu mvugo ikwiye. 3.4. Guhina no guhimba umwandiko akurikiranya neza ingingo. 3.5. Kumurika ingero zifatika zihamya akamaro k’isuku n’isukura. 3.6. Gukoresha ibinyazina binyuranye ku buryo bukwiye.

4. Gukoresha Ikinyarwanda k'intyoza agaragaza uburyo bunyuranye bwo gutunganya ubutaka no gukoresha ibinyazina binyuranye.

4.1. Gukoresha Ikinyarwanda k'intyoza agaragaza ko yumva umwandiko ku mitunganyirize y’ubutaka abinyujije mu ngiro zitandukanye.

4.2. Gusoma neza umwandiko yubahiriza utwatuzo n’isesekaza 4.3. Gusubiza ibibazo ku mwandiko mu mvugo ikwiye. 4.4. Guhina no guhimba umwandiko akurikiranya neza ingingo. 4.5. Kumurika ingero zifatika zihamya imitunganyirize iboneye

y’ubutaka. 4.6. Gukoresha ibinyazina binyuranye ku buryo bukwiye.

5. Gukoresha neza uburyo bunyuranye bw’ ubwumvane no kwandika yubahiriza imyandikire y’Ikinyarwanda.

5.1. Gukoresha Ikinyarwanda k'intyoza, uwiga agaragaza ko yumva ikinamico ku nsanganyamatsiko yerekeye ubwumvane mu ngiro zitandukanye.

5.2. Gusoma neza ikinamico yubahiriza uturango twayo. 5.3. Gusubiza ibibazo ku ikinamico mu mvugo ikwiye. 5.4. Guhimba no gukina ikinamico ahuza imvugo n’ingiro. 5.5. Gukoresha neza inzego z’ururimi. 5.6. Kubahiriza imyandikire y’amazina bwite.

Umusaruro w’inyigisho 1.1: Gukoresha Ikinyarwanda k'intyoza uwiga agaragaza ko yumva

inkurushusho abinyujije mu ngiro zitandukanye.

Ibimenyetso by’uteze amatwi atarogoya ufite ijambo.

Inkurushusho Insanganyamatsiko; Inyunguramagambo; ingingo z’umuco

n’amateka; Inshamake

y’inkurushusho; inshoza n’uturango

by’inkurushusho; isomo ry’ingenzi; isesekaza n’utwatuzo.

o Gusoma inkurushusho bucece.

o Gusoma inkurushusho mu matsinda bashaka: - Ibisobanuro

by’amagambo akomeye; - Ibisubizo by’ibibazo byo

kumva inkurushusho no kumurika ibivuyemo;

o Gusoma inkurushusho uwiga aranguruye ;

o Gusoma inkurushusho bakuranwa ;

o Guhuza ibivugwa mu nkurushusho n’indangagaciro;

o Gusanisha ingeso zivugwa mu nkurushusho n’imyitwarire y’abantu;

o Gukoresha Ikinyarwanda k'intyoza agaragaza insanganyamatsiko z’ingenzi;

o Gusobanura ingingo z’umuco

˗ Ibitabo by’ubuvanganzo (inkurushusho) ;

˗ Ibinyamakuru bikoresha inkurushusho ;

˗ Sede (cd); ˗ Disiketi ; ˗ Ikibaho; ˗ Marikeri; ˗ Murandasi; ˗ Inkoranyamagambo.

Gukoresha ubuvanganzo nyandiko ashyikirana n’abandi

1 Umusaruro w’inyigisho:

1. Gukoresha Ikinyarwanda k'intyoza uwiga agaragaza ko yumva inkurushusho abinyujije mu ngiro zitandukanye

2. Gusubiza ibibazo ku nkurushusho mu mvugo ikwiye. 3. Gusoma neza inkurushusho yubahiriza uturango n’isesekaza. 4. Guhindura inkurushusho mo agakino akurikiranya neza ingingo. 5.

Date post:	28-Jul-2020
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times